-
All-fiber, near-infrared, laser system at 780nm for atom cooling
Authors:
Matteo Marchesini,
Michelangelo Dondi,
Leonardo Rossi,
Gabriele Bolognini,
Marco Prevedelli,
Francesco Minardi
Abstract:
Cold neutral atoms are a promising "architecture" for novel and innovative quantum technology applications. These range from quantum sensors for magnetic fields, interferometers for gravimetry measurements, to quantum computing and simulations. Within this technological landscape, reliable laser systems are crucial in order to cool and manipulate atoms efficiently. We present the design, experimen…
▽ More
Cold neutral atoms are a promising "architecture" for novel and innovative quantum technology applications. These range from quantum sensors for magnetic fields, interferometers for gravimetry measurements, to quantum computing and simulations. Within this technological landscape, reliable laser systems are crucial in order to cool and manipulate atoms efficiently. We present the design, experimental realization and characterization of a relatively simple, compact, and economical laser system for quantum technology applications. It operates at 780 nm in order to work with Rubidium atoms, and it is entirely based on fiber components. This improves its reliability, and makes it less complex and more versatile with respect to a free-space system.
In order to cut costs, we take advantage of already available commercial fiber devices at 1560 nm: due to their ubiquity in telecom applications they are in fact cheap and standardized. To operate at Rubidium wavelengths the system employs Second-Harmonic Generation (SHG) of the 1560 nm infrared radiation: two semiconductor lasers at 1560 nm (one for cooling, one for repum**) are combined, amplified in an Erbium-Doped Fiber Amplifier (EDFA), and frequency-doubled in a Periodically-Poled Lithium Niobate (PPLN) crystal.
We characterize the amplitude stability of the lasers, their frequency noise, and the SHG efficiency. The measured features (rms relative amplitude noise of 3$\times$10$^{-4}$ at 1 s; linewidths well below 1 MHz) make our system a suitable candidate for applications in quantum sensors and atom interferometers.
△ Less
Submitted 21 May, 2024;
originally announced May 2024.
-
TEX (TEst stand for X-band) at LNF
Authors:
C. Di Giulio,
F. Cardelli,
S. Pioli,
D. Alesini,
M. Bellaveglia,
S. Bini,
B. Buonomo,
S. Cantarella,
G. Catuscelli,
M. Ceccarelli,
R. Ceccarelli,
M. Cianfrini,
R. Clementi,
E. Di Pasquale,
G. Di Raddo,
R. Di Raddo,
A. Falone,
A. Gallo,
G. Latini,
A. Liedl,
V. Lollo,
G. Piermarini,
L. Piersanti,
S. Quaglia,
L. A. Rossi
, et al. (5 additional authors not shown)
Abstract:
TEX facility if commissioned for high power testing to characterize accelerating structures and validate them for the operation on future particle accelerators for medical, industrial and research applications. At this aim, TEX is directly involved in the LNF leading project EuPRAXIA@SPARC_Lab. The brief description of the facility and its status and prospective will be provided.
TEX facility if commissioned for high power testing to characterize accelerating structures and validate them for the operation on future particle accelerators for medical, industrial and research applications. At this aim, TEX is directly involved in the LNF leading project EuPRAXIA@SPARC_Lab. The brief description of the facility and its status and prospective will be provided.
△ Less
Submitted 31 August, 2023; v1 submitted 6 August, 2023;
originally announced August 2023.
-
Towards a Muon Collider
Authors:
Carlotta Accettura,
Dean Adams,
Rohit Agarwal,
Claudia Ahdida,
Chiara Aimè,
Nicola Amapane,
David Amorim,
Paolo Andreetto,
Fabio Anulli,
Robert Appleby,
Artur Apresyan,
Aram Apyan,
Sergey Arsenyev,
Pouya Asadi,
Mohammed Attia Mahmoud,
Aleksandr Azatov,
John Back,
Lorenzo Balconi,
Laura Bandiera,
Roger Barlow,
Nazar Bartosik,
Emanuela Barzi,
Fabian Batsch,
Matteo Bauce,
J. Scott Berg
, et al. (272 additional authors not shown)
Abstract:
A muon collider would enable the big jump ahead in energy reach that is needed for a fruitful exploration of fundamental interactions. The challenges of producing muon collisions at high luminosity and 10 TeV centre of mass energy are being investigated by the recently-formed International Muon Collider Collaboration. This Review summarises the status and the recent advances on muon colliders desi…
▽ More
A muon collider would enable the big jump ahead in energy reach that is needed for a fruitful exploration of fundamental interactions. The challenges of producing muon collisions at high luminosity and 10 TeV centre of mass energy are being investigated by the recently-formed International Muon Collider Collaboration. This Review summarises the status and the recent advances on muon colliders design, physics and detector studies. The aim is to provide a global perspective of the field and to outline directions for future work.
△ Less
Submitted 27 November, 2023; v1 submitted 15 March, 2023;
originally announced March 2023.
-
A Work Proposal for a Collaborative Study of Magnet Technology for a Future Muon Collider
Authors:
L. Bottura,
D. Aguglia,
B. Auchmann,
T. Arndt,
J. Beard,
A. Bersani,
F. Boattini,
M. Breschi,
B. Caiffi,
X. Chaud,
M. Dam,
F. Debray,
H. De Gersem,
E. De Matteis,
A. Dudarev,
S. Farinon,
A. Kario,
R. Losito,
S. Mariotto,
M. Mentink,
R. Musenich,
T. Ogitsu,
M. Prioli,
L. Quettier,
L. Rossi
, et al. (8 additional authors not shown)
Abstract:
In this paper we elaborate on the nature and challenges for the magnet systems of a muon collider as presently considered within the scope of the International Muon Collider Collaboration (IMCC). We outline the structure of the work proposed over the coming period of five years to study and demonstrate relevant magnet technology. The proposal, which is part of the overall work planned to establish…
▽ More
In this paper we elaborate on the nature and challenges for the magnet systems of a muon collider as presently considered within the scope of the International Muon Collider Collaboration (IMCC). We outline the structure of the work proposed over the coming period of five years to study and demonstrate relevant magnet technology. The proposal, which is part of the overall work planned to establish feasibility of a muon collider, is in direct response to the recent recommendations received from the Laboratories Directors Group (LDG). The plan is to profit from joint activities, within the scope of the IMCC and beyond, implemented through direct and EU-funded contributions.
△ Less
Submitted 29 March, 2022; v1 submitted 26 March, 2022;
originally announced March 2022.
-
High Field Magnet Development for HEP in Europe: A Proposal from LDG HFM Expert Panel
Authors:
Pierre Védrine,
Luis Garcia-Tabarès,
Bernhard Auchmann,
Amalia Ballarino,
Bertrand Baudouy,
Luca Bottura,
Philippe Fazilleau,
Mathias Noe,
Soren Prestemon,
Etienne Rochepault,
Lucio Rossi,
Carmine Senatore,
Ben Shepherd
Abstract:
The European Laboratory Directors Group (LDG) was mandated by CERN Council in 2021 to oversee the development of an Accelerator R&D Roadmap. To this end, a set of expert panels was convened, covering the five broad areas of accelerator R&D highlighted in the ESPPU. The High Field Magnet (HFM) Panel is proposing a programme to demonstrate Nb3Sn magnet technology for large-scale deployment and to in…
▽ More
The European Laboratory Directors Group (LDG) was mandated by CERN Council in 2021 to oversee the development of an Accelerator R&D Roadmap. To this end, a set of expert panels was convened, covering the five broad areas of accelerator R&D highlighted in the ESPPU. The High Field Magnet (HFM) Panel is proposing a programme to demonstrate Nb3Sn magnet technology for large-scale deployment and to investigate the suitability of high temperature superconductors (HTS) for accelerator magnet applications. A summary of this programme is presented here.
△ Less
Submitted 15 March, 2022;
originally announced March 2022.
-
A Muon Collider Facility for Physics Discovery
Authors:
D. Stratakis,
N. Mokhov,
M. Palmer,
N. Pastrone,
T. Raubenheimer,
C. Rogers,
D. Schulte,
V. Shiltsev,
J. Tang,
A. Yamamoto,
C. Aimè,
M. A. Mahmoud,
N. Bartosik,
E. Barzi,
A. Bersani,
A. Bertolin,
M. Bonesini,
B. Caiffi,
M. Casarsa,
M. G. Catanesi,
A. Cerri,
C. Curatolo,
M. Dam,
H. Damerau,
E. De Matteis
, et al. (44 additional authors not shown)
Abstract:
Muon colliders provide a unique route to deliver high energy collisions that enable discovery searches and precision measurements to extend our understanding of the fundamental laws of physics. The muon collider design aims to deliver physics reach at the highest energies with costs, power consumption and on a time scale that may prove favorable relative to other proposed facilities. In this conte…
▽ More
Muon colliders provide a unique route to deliver high energy collisions that enable discovery searches and precision measurements to extend our understanding of the fundamental laws of physics. The muon collider design aims to deliver physics reach at the highest energies with costs, power consumption and on a time scale that may prove favorable relative to other proposed facilities. In this context, a new international collaboration has formed to further extend the design concepts and performance studies of such a machine. This effort is focused on delivering the elements of a $\sim$10 TeV center of mass (CM) energy design to explore the physics energy frontier. The path to such a machine may pass through lower energy options. Currently a 3 TeV CM stage is considered. Other energy stages could also be explored, e.g. an s-channel Higgs Factory operating at 125 GeV CM. We describe the status of the R&D and design effort towards such a machine and lay out a plan to bring these concepts to maturity as a tool for the high energy physics community.
△ Less
Submitted 15 March, 2022;
originally announced March 2022.
-
Promising Technologies and R&D Directions for the Future Muon Collider Detectors
Authors:
Sergo **dariani,
Federico Meloni,
Nadia Pastrone,
Chiara Aimè,
Nazar Bartosik,
Emanuela Barzi,
Alessandro Bertolin,
Alessandro Braghieri,
Laura Buonincontri,
Simone Calzaferri,
Massimo Casarsa,
Maria Gabriella Catanesi,
Alessandro Cerri,
Grigorios Chachamis,
Anna Colaleo,
Camilla Curatolo,
Giacomo Da Molin,
Jean-Pierre Delahaye,
Biagio Di Micco,
Tommaso Dorigo,
Filippo Errico,
Davide Fiorina,
Alessio Gianelle,
Carlo Giraldin,
John Hauptman
, et al. (36 additional authors not shown)
Abstract:
Among the post-LHC generation of particle accelerators, the muon collider represents a unique machine with capability to provide very high energy leptonic collisions and to open the path to a vast and mostly unexplored physics programme. However, on the experimental side, such great physics potential is accompanied by unprecedented technological challenges, due to the fact that muons are unstable…
▽ More
Among the post-LHC generation of particle accelerators, the muon collider represents a unique machine with capability to provide very high energy leptonic collisions and to open the path to a vast and mostly unexplored physics programme. However, on the experimental side, such great physics potential is accompanied by unprecedented technological challenges, due to the fact that muons are unstable particles. Their decay products interact with the machine elements and produce an intense flux of background particles that eventually reach the detector and may degrade its performance. In this paper, we present technologies that have a potential to match the challenging specifications of a muon collider detector and outline a path forward for the future R&D efforts.
△ Less
Submitted 14 March, 2022;
originally announced March 2022.
-
Fast cycling HTS based superconducting accelerator magnets: Feasibility study and readiness demonstration program driven by neutrino physics and muon collider needs
Authors:
Henryk Piekarz,
Bradley Claypool,
Steven Hays,
Matthew Kufer,
Vladimir Shiltsev,
Alexander Zlobin,
Lucio Rossi
Abstract:
Development of energy-efficient fast cycling accelerator magnets is critical for the next generation of proton rapid cycling synchrotrons (RCS) for neutrino research and booster accelerators of future muon colliders. We see a unique opportunity for having such magnets to be built on base of High Temperature Superconductors (HTS). Besides being superconducting at relatively high temperatures, rare-…
▽ More
Development of energy-efficient fast cycling accelerator magnets is critical for the next generation of proton rapid cycling synchrotrons (RCS) for neutrino research and booster accelerators of future muon colliders. We see a unique opportunity for having such magnets to be built on base of High Temperature Superconductors (HTS). Besides being superconducting at relatively high temperatures, rare-earth HTS tapes have shown very small AC losses compared to low-temperature NbTi superconductor cables. Recent tests of the HTS-based 0.5 m long two-bore superconducting accelerator magnet have shown record high dB/dt ram** rates of about 300 T/s at 10 Hz repetition rate and 0.5 T B-field span. No temperature rise in 6 K cooling He was observed within the 0.003 K error setting the upper limit on the cryogenic power loss in the magnet conductor coil to be less than 0.2 W/m. Based on this result we outline a possible upgrade of this test magnet design to 2 T B-field in the 10 mm beam gap with the dB/dt ram** rates up to 1000 T/s. The power test results of this short sample magnet will be used to project both cryogenic and electrical power losses as a function of the magnet B-field and the dB/dt ram** rates. Then these projections will be scaled to the range of expected accelerator magnet beam gaps and B-fields for the proton and muon RCS accelerators. We invite collaborators to join these studies and call for support of the R&D program aimed at comprehensive demonstration of this approach that includes design, construction, and power tests of a long prototype of the HTS-based fast-cycling accelerator magnet by 2028.
△ Less
Submitted 11 March, 2022;
originally announced March 2022.
-
European Strategy for Particle Physics -- Accelerator R&D Roadmap
Authors:
C. Adolphsen,
D. Angal-Kalinin,
T. Arndt,
M. Arnold,
R. Assmann,
B. Auchmann,
K. Aulenbacher,
A. Ballarino,
B. Baudouy,
P. Baudrenghien,
M. Benedikt,
S. Bentvelsen,
A. Blondel,
A. Bogacz,
F. Bossi,
L. Bottura,
S. Bousson,
O. Brüning,
R. Brinkmann,
M. Bruker,
O. Brunner,
P. N. Burrows,
G. Burt,
S. Calatroni,
K. Cassou
, et al. (111 additional authors not shown)
Abstract:
The 2020 update of the European Strategy for Particle Physics emphasised the importance of an intensified and well-coordinated programme of accelerator R&D, supporting the design and delivery of future particle accelerators in a timely, affordable and sustainable way. This report sets out a roadmap for European accelerator R&D for the next five to ten years, covering five topical areas identified…
▽ More
The 2020 update of the European Strategy for Particle Physics emphasised the importance of an intensified and well-coordinated programme of accelerator R&D, supporting the design and delivery of future particle accelerators in a timely, affordable and sustainable way. This report sets out a roadmap for European accelerator R&D for the next five to ten years, covering five topical areas identified in the Strategy update. The R&D objectives include: improvement of the performance and cost-performance of magnet and radio-frequency acceleration systems; investigations of the potential of laser / plasma acceleration and energy-recovery linac techniques; and development of new concepts for muon beams and muon colliders. The goal of the roadmap is to document the collective view of the field on the next steps for the R&D programme, and to provide the evidence base to support subsequent decisions on prioritisation, resourcing and implementation.
△ Less
Submitted 30 March, 2022; v1 submitted 19 January, 2022;
originally announced January 2022.
-
Self-assembly of Colloidal Superballs Under Spherical Confinement of a Drying Droplet
Authors:
Sarah N. Schyck,
Janne-Mieke Meijer,
Lucia Baldauf,
Peter Schall,
Andrei V. Petukhov,
Laura Rossi
Abstract:
Understanding the relationship between colloidal building block shape and self-assembled material structure is important for the development of novel materials by self-assembly. In this regard, colloidal superballs are unique building blocks because their shape can smoothly transition between spherical and cubic. Assembly of colloidal superballs under spherical confinement results in macroscopic c…
▽ More
Understanding the relationship between colloidal building block shape and self-assembled material structure is important for the development of novel materials by self-assembly. In this regard, colloidal superballs are unique building blocks because their shape can smoothly transition between spherical and cubic. Assembly of colloidal superballs under spherical confinement results in macroscopic clusters with ordered internal structure. By utilizing Small Angle X-Ray Scattering (SAXS), we probe the internal structure of colloidal superball dispersion droplets during confinement. We observe and identify four distinct drying regimes that arise during compression via evaporating droplets, and we track the development of the assembled macrostructure. As the superballs assemble, we found that they arrange into the predicted paracrystalline, rhombohedral C1-lattice that varies by the constituent superballs' shape. This provides insights in the behavior between confinement and particle shape that can be applied in the development of new functional materials.
△ Less
Submitted 14 December, 2021; v1 submitted 13 August, 2021;
originally announced August 2021.
-
Discriminating chaotic and stochastic time series using permutation entropy and artificial neural networks
Authors:
B. R. R. Boaretto,
R. C. Budzinski,
K. L. Rossi,
T. L. Prado,
S. R. Lopes,
C. Masoller
Abstract:
Extracting relevant properties of empirical signals generated by nonlinear, stochastic, and high-dimensional systems is a challenge of complex systems research. Open questions are how to differentiate chaotic signals from stochastic ones, and how to quantify nonlinear and/or high-order temporal correlations. Here we propose a new technique to reliably address both problems. Our approach follows tw…
▽ More
Extracting relevant properties of empirical signals generated by nonlinear, stochastic, and high-dimensional systems is a challenge of complex systems research. Open questions are how to differentiate chaotic signals from stochastic ones, and how to quantify nonlinear and/or high-order temporal correlations. Here we propose a new technique to reliably address both problems. Our approach follows two steps: first, we train an artificial neural network (ANN) with flicker (colored) noise to predict the value of the parameter, $α$, that determines the strength of the correlation of the noise. To predict $α$ the ANN input features are a set of probabilities that are extracted from the time series by using symbolic ordinal analysis. Then, we input to the trained ANN the probabilities extracted from the time series of interest, and analyze the ANN output. We find that the $α$ value returned by the ANN is informative of the temporal correlations present in the time series. To distinguish between stochastic and chaotic signals, we exploit the fact that the difference between the permutation entropy (PE) of a given time series and the PE of flicker noise with the same $α$ parameter is small when the time series is stochastic, but it is large when the time series is chaotic. We validate our technique by analysing synthetic and empirical time series whose nature is well established. We also demonstrate the robustness of our approach with respect to the length of the time series and to the level of noise. We expect that our algorithm, which is freely available, will be very useful to the community.
△ Less
Submitted 6 July, 2021;
originally announced July 2021.
-
Analysis and Simulation of a Novel Run-and-Tumble Model with Autochemotaxis
Authors:
Nicholas J. Russell,
Louis F. Rossi
Abstract:
We model, analyze, and simulate a novel run-and-tumble model with autochemotaxis, biologically inspired by the phytoplankton Heterosigma akashiwo. Develo** a fundamental understanding of planktonic movements and interactions through phototaxis and chemotaxis is vital to comprehending why harmful algal blooms (HABs) start to form and how they can be prevented. We develop a one- and two-dimensiona…
▽ More
We model, analyze, and simulate a novel run-and-tumble model with autochemotaxis, biologically inspired by the phytoplankton Heterosigma akashiwo. Develo** a fundamental understanding of planktonic movements and interactions through phototaxis and chemotaxis is vital to comprehending why harmful algal blooms (HABs) start to form and how they can be prevented. We develop a one- and two-dimensional mathematical and computational model reflecting the movement of an ecology of plankton, incorporating both run-and-tumble motion and autochemotaxis. We present a succession of complex and biologically meaningful models combined with a sequence of laboratory and computational experiments that inform the ideas underlying the model. By analyzing the dynamics and pattern formation which are similar to experimental observations, we identify parameters that are significant in plankton's pattern formation in the absence of bulk fluid flow. We find that the precise form of chemical deposition and plankton sensitivity to small chemical gradients are crucial parameters that drive nonlinear pattern formation in the plankton density.
△ Less
Submitted 3 February, 2021; v1 submitted 7 September, 2020;
originally announced September 2020.
-
Synchronization malleability in neural networks under a distance-dependent coupling
Authors:
R. C. Budzinski,
K. L. Rossi,
B. R. R. Boaretto,
T. L. Prado,
S. R. Lopes
Abstract:
We investigate the synchronization features of a network of spiking neurons under a distance-dependent coupling following a power-law model. The interplay between topology and coupling strength leads to the existence of different spatiotemporal patterns, corresponding to either non-synchronized or phase-synchronized states. Particularly interesting is what we call synchronization malleability, in…
▽ More
We investigate the synchronization features of a network of spiking neurons under a distance-dependent coupling following a power-law model. The interplay between topology and coupling strength leads to the existence of different spatiotemporal patterns, corresponding to either non-synchronized or phase-synchronized states. Particularly interesting is what we call synchronization malleability, in which the system depicts significantly different phase synchronization degrees for the same parameters as a consequence of a different ordering of neural inputs. We analyze the functional connectivity of the network by calculating the mutual information between neuronal spike trains, allowing us to characterize the structures of synchronization in the network. We show that these structures are dependent on the ordering of the inputs for the parameter regions where the network presents synchronization malleability and we suggest that this is due to a complex interplay between coupling, connection architecture, and individual neural inputs.
△ Less
Submitted 10 November, 2020; v1 submitted 5 June, 2020;
originally announced June 2020.
-
Modeling the propagation of riots, collective behaviors, and epidemics
Authors:
Henri Berestycki,
Samuel Nordmann,
Luca Rossi
Abstract:
This paper is concerned with a family of Reaction-Diffusion systems that we introduced in [15], and that generalizes the SIR type models from epidemiology. Such systems are now also used to describe collective behaviors.In this paper, we propose a modeling approach for these apparently diverse phenomena through the example of the dynamics of social unrest. The model involves two quantities: the le…
▽ More
This paper is concerned with a family of Reaction-Diffusion systems that we introduced in [15], and that generalizes the SIR type models from epidemiology. Such systems are now also used to describe collective behaviors.In this paper, we propose a modeling approach for these apparently diverse phenomena through the example of the dynamics of social unrest. The model involves two quantities: the level of social unrest, or more generally activity, u, and a field of social tension v, which play asymmetric roles. We think of u as the actually observed or explicit quantity while v is an ambiant, sometimes implicit, field of susceptibility that modulates the dynamics of u. In this article, we explore this class of model and prove several theoretical results based on the framework developed in [15], of which the present work is a companion paper. We particularly emphasize here two subclasses of systems: tension inhibiting and tension enhancing. These are characterized by respectively a negative or a positivefeedback of the unrest on social tension. We establish several properties for these classes and also study some extensions. In particular, we describe the behavior of the system following an initial surge of activity. We show that the model can give rise to many diverse qualitative dynamics. We also provide a variety of numerical simulations to illustrate our results and to reveal further properties and open questions.
△ Less
Submitted 15 February, 2021; v1 submitted 20 May, 2020;
originally announced May 2020.
-
Efficient Discrete-Event Based Particle Tracking Simulation for High Energy Physics
Authors:
Lucio Santi,
Lucas Rossi,
Rodrigo Castro
Abstract:
This work presents novel discrete event-based simulation algorithms based on the Quantized State System (QSS) numerical methods. QSS provides attractive features for particle transportation processes, in particular a very efficient handling of discontinuities in the simulation of continuous systems. We focus on High Energy Physics (HEP) particle tracking applications that typically rely on discret…
▽ More
This work presents novel discrete event-based simulation algorithms based on the Quantized State System (QSS) numerical methods. QSS provides attractive features for particle transportation processes, in particular a very efficient handling of discontinuities in the simulation of continuous systems. We focus on High Energy Physics (HEP) particle tracking applications that typically rely on discrete time-based methods, and study the advantages of adopting a discrete event-based numerical approach that resolves efficiently the crossing of geometry boundaries by a traveling particle. For this purpose we follow two complementary strategies. First, a new co-simulation technique connects the Geant4 simulation toolkit with a standalone QSS solver. Second, a new native QSS numerical stepper is embedded into Geant4. We compare both approaches against the latest Geant4 default steppers in different HEP setups, including a complex real scenario (the CMS particle detector at CERN). Our techniques achieve relevant simulation speedups in a wide range of scenarios, particularly when the intensity of discrete-event handling dominates performance in the solving of the continuous laws of particle motion.
△ Less
Submitted 12 September, 2020; v1 submitted 15 January, 2020;
originally announced January 2020.
-
Community Detection in Multiplex Networks
Authors:
Matteo Magnani,
Obaida Hanteer,
Roberto Interdonato,
Luca Rossi,
Andrea Tagarelli
Abstract:
A multiplex network models different modes of interaction among same-type entities. In this article we provide a taxonomy of community detection algorithms in multiplex networks. We characterize the different algorithms based on various properties and we discuss the type of communities detected by each method. We then provide an extensive experimental evaluation of the reviewed methods to answer t…
▽ More
A multiplex network models different modes of interaction among same-type entities. In this article we provide a taxonomy of community detection algorithms in multiplex networks. We characterize the different algorithms based on various properties and we discuss the type of communities detected by each method. We then provide an extensive experimental evaluation of the reviewed methods to answer three main questions: to what extent the evaluated methods are able to detect ground-truth communities, to what extent different methods produce similar community structures and to what extent the evaluated methods are scalable. One goal of this survey is to help scholars and practitioners to choose the right methods for the data and the task at hand, while also emphasizing when such choice is problematic.
△ Less
Submitted 20 January, 2021; v1 submitted 16 October, 2019;
originally announced October 2019.
-
Shape and Interaction Decoupling for Colloidal Pre-Assembly
Authors:
Lucia Baldauf,
Erin G. Teich,
Peter Schall,
Greg van Anders,
Laura Rossi
Abstract:
Creating materials with structure that is independently controllable at a range of scales requires breaking naturally occurring hierarchies. Breaking these hierarchies can be achieved via the decoupling of building block attributes from structure during assembly. Here, we demonstrate both geometric and interaction decoupling in pre-assembled colloidal structures of cube-like particles with rounded…
▽ More
Creating materials with structure that is independently controllable at a range of scales requires breaking naturally occurring hierarchies. Breaking these hierarchies can be achieved via the decoupling of building block attributes from structure during assembly. Here, we demonstrate both geometric and interaction decoupling in pre-assembled colloidal structures of cube-like particles with rounded edges. Through computer simulations and experiments, we show that compressing a small number of such cubes in spherical confinement results in clusters with highly reproducible structures that can be used as mesoscale building blocks to form the next level of structural hierarchy. These clusters demonstrate geometric decoupling between particle shape and cluster structure; namely, for clusters of up to nine particles, the colloidal superballs pack consistently like spheres, despite the presence of shape anisotropy and facets in the cubic-like particles. We confirm that cluster structure is also decoupled from inter-particle interaction, showing that the same structures arise from the spherical confinement of both non-magnetic and magnetic colloidal cubes with strong dipolar interactions. To highlight the potential of these superball clusters for hierarchical assembly, we demonstrate, using computer simulations, that clusters of six to nine particles can self-assemble into high-order structures that differ from those of similarly shaped particles without pre-assembly. These results demonstrate decoupling for anisotropic building blocks that can be further exploited for hierarchical materials development.
△ Less
Submitted 13 August, 2021; v1 submitted 23 September, 2019;
originally announced September 2019.
-
The Impact of Projection and Backboning on Network Topologies
Authors:
Michele Coscia,
Luca Rossi
Abstract:
Bipartite networks are a well known strategy to study a variety of phenomena. The commonly used method to deal with this type of network is to project the bipartite data into a unipartite weighted graph and then using a backboning technique to extract only the meaningful edges. Despite the wide availability of different methods both for projection and backboning, we believe that there has been lit…
▽ More
Bipartite networks are a well known strategy to study a variety of phenomena. The commonly used method to deal with this type of network is to project the bipartite data into a unipartite weighted graph and then using a backboning technique to extract only the meaningful edges. Despite the wide availability of different methods both for projection and backboning, we believe that there has been little attention to the effect that the combination of these two processes has on the data and on the resulting network topology. In this paper we study the effect that the possible combinations of projection and backboning techniques have on a bipartite network. We show that the 12 methods group into two clusters producing unipartite networks with very different topologies. We also show that the resulting level of network centralization is highly affected by the combination of projection and backboning applied.
△ Less
Submitted 21 June, 2019;
originally announced June 2019.
-
GIGJ: a crustal gravity model of the Guangdong Province for predicting the geoneutrino signal at the JUNO experiment
Authors:
M. Reguzzoni,
L. Rossi,
M. Baldoncini,
I. Callegari,
P. Poli,
D. Sampietro,
V. Strati,
F. Mantovani,
G. Andronico,
V. Antonelli,
M. Bellato,
E. Bernieri,
A. Brigatti,
R. Brugnera,
A. Budano,
M. Buscemi,
S. Bussino,
R. Caruso,
D. Chiesa,
D. Corti,
F. Dal Corso,
X. F. Ding,
S. Dusini,
A. Fabbri,
G. Fiorentini
, et al. (44 additional authors not shown)
Abstract:
Gravimetric methods are expected to play a decisive role in geophysical modeling of the regional crustal structure applied to geoneutrino studies. GIGJ (GOCE Inversion for Geoneutrinos at JUNO) is a 3D numerical model constituted by ~46 x 10$^{3}$ voxels of 50 x 50 x 0.1 km, built by inverting gravimetric data over the 6° x 4° area centered at the Jiangmen Underground Neutrino Observatory (JUNO) e…
▽ More
Gravimetric methods are expected to play a decisive role in geophysical modeling of the regional crustal structure applied to geoneutrino studies. GIGJ (GOCE Inversion for Geoneutrinos at JUNO) is a 3D numerical model constituted by ~46 x 10$^{3}$ voxels of 50 x 50 x 0.1 km, built by inverting gravimetric data over the 6° x 4° area centered at the Jiangmen Underground Neutrino Observatory (JUNO) experiment, currently under construction in the Guangdong Province (China). The a-priori modeling is based on the adoption of deep seismic sounding profiles, receiver functions, teleseismic P-wave velocity models and Moho depth maps, according to their own accuracy and spatial resolution. The inversion method allowed for integrating GOCE data with the a-priori information and regularization conditions through a Bayesian approach and a stochastic optimization. GIGJ fits the homogeneously distributed GOCE gravity data, characterized by high accuracy, with a ~1 mGal standard deviation of the residuals, compatible with the observation accuracy. Conversely to existing global models, GIGJ provides a site-specific subdivision of the crustal layers masses which uncertainties include estimation errors, associated to the gravimetric solution, and systematic uncertainties, related to the adoption of a fixed sedimentary layer. A consequence of this local rearrangement of the crustal layer thicknesses is a ~21% reduction and a ~24% increase of the middle and lower crust expected geoneutrino signal, respectively. Finally, the geophysical uncertainties of geoneutrino signals at JUNO produced by unitary uranium and thorium abundances distributed in the upper, middle and lower crust are reduced by 77%, 55% and 78%, respectively. The numerical model is available at http://www.fe.infn.it/u/radioactivity/GIGJ
△ Less
Submitted 7 January, 2019;
originally announced January 2019.
-
Machine Parameters and Projected Luminosity Performance of Proposed Future Colliders at CERN
Authors:
Frederick Bordry,
Michael Benedikt,
Oliver Bruning,
John Jowett,
Lucio Rossi,
Daniel Schulte,
Steinar Stapnes,
Frank Zimmermann
Abstract:
In response to a request from the CERN Scientific Policy Committee (SPC), the machine parameters and expected luminosity performance for several proposed post-LHC collider projects at CERN are compiled: three types of hadron colliders (HL-LHC upgrade, FCC-hh and HE-LHC), a circular lepton collider (FCC-ee), a linear lepton collider (CLIC), and three options for lepton-hadron colliders (LHeC, HE-LH…
▽ More
In response to a request from the CERN Scientific Policy Committee (SPC), the machine parameters and expected luminosity performance for several proposed post-LHC collider projects at CERN are compiled: three types of hadron colliders (HL-LHC upgrade, FCC-hh and HE-LHC), a circular lepton collider (FCC-ee), a linear lepton collider (CLIC), and three options for lepton-hadron colliders (LHeC, HE-LHeC, and FCC-eh). Particular emphasis is put on availability, physics run time, and efficiency. The information contained in this document was presented at the SPC Meeting of September 2018. It will serve as one of the inputs to the 2019/20 Update of the European Strategy for Particle Physics.
△ Less
Submitted 30 October, 2018;
originally announced October 2018.
-
FAMU: study of the energy dependent transfer rate $Λ_{μp \rightarrow μO}$
Authors:
FAMU Collaboration,
E. Mocchiutti,
V. Bonvicini,
M. Danailov,
E. Furlanetto,
K. S. Gadedjisso-Tossou,
D. Guffanti,
C. Pizzolotto,
A. Rachevski,
L. Stoychev,
E. Vallazza,
G. Zampa,
J. Niemela,
K. Ishida,
A. Adamczak,
G. Baccolo,
R. Benocci,
R. Bertoni,
M. Bonesini,
F. Chignoli,
M. Clemenza,
A. Curioni,
V. Maggi,
R. Mazza,
M. Moretti
, et al. (31 additional authors not shown)
Abstract:
The main goal of the FAMU experiment is the measurement of the hyperfine splitting (hfs) in the 1S state of muonic hydrogen $ΔE_{hfs}(μ^-p)1S$. The physical process behind this experiment is the following: $μp$ are formed in a mixture of hydrogen and a higher-Z gas. When absorbing a photon at resonance-energy $ΔE_{hfs}\approx0.182$~eV, in subsequent collisions with the surrounding $H_2$ molecules,…
▽ More
The main goal of the FAMU experiment is the measurement of the hyperfine splitting (hfs) in the 1S state of muonic hydrogen $ΔE_{hfs}(μ^-p)1S$. The physical process behind this experiment is the following: $μp$ are formed in a mixture of hydrogen and a higher-Z gas. When absorbing a photon at resonance-energy $ΔE_{hfs}\approx0.182$~eV, in subsequent collisions with the surrounding $H_2$ molecules, the $μp$ is quickly de-excited and accelerated by $\sim2/3$ of the excitation energy. The observable is the time distribution of the K-lines X-rays emitted from the $μZ$ formed by muon transfer $(μp) +Z \rightarrow (μZ)^*+p$, a reaction whose rate depends on the $μp$ kinetic energy. The maximal response, to the tuned laser wavelength, of the time distribution of X-ray from K-lines of the $(μZ)^*$ cascade indicate the resonance. During the preparatory phase of the FAMU experiment, several measurements have been performed both to validate the methodology and to prepare the best configuration of target and detectors for the spectroscopic measurement. We present here the crucial study of the energy dependence of the transfer rate from muonic hydrogen to oxygen ($Λ_{μp \rightarrow μO}$), precisely measured for the first time.
△ Less
Submitted 22 January, 2019; v1 submitted 20 August, 2018;
originally announced August 2018.
-
An ultra-compact low temperature scanning probe microscope for magnetic fields above 30 T
Authors:
L. Rossi,
J. W. Gerritsen,
L. Nelemans,
A. A. Khajetoorians,
B. Bryant
Abstract:
We present the design of a highly compact High Field Scanning Probe Microscope (HF-SPM) for operation at cryogenic temperatures in an extremely high magnetic field, provided by a water-cooled Bitter magnet able to reach 38 T. The HF-SPM is 14 mm in diameter: an Attocube nano-positioner controls the coarse approach of a piezo resistive AFM cantilever to a scanned sample. The Bitter magnet constitut…
▽ More
We present the design of a highly compact High Field Scanning Probe Microscope (HF-SPM) for operation at cryogenic temperatures in an extremely high magnetic field, provided by a water-cooled Bitter magnet able to reach 38 T. The HF-SPM is 14 mm in diameter: an Attocube nano-positioner controls the coarse approach of a piezo resistive AFM cantilever to a scanned sample. The Bitter magnet constitutes an extreme environment for SPM due to the high level of vibrational noise; the Bitter magnet noise at frequencies up to 300 kHz is characterized and noise mitigation methods are described. The performance of the HF-SPM is demonstrated by topographic imaging and noise measurements at up to 30 T. Additionally, the use of the SPM as a three-dimensional dilatometer for magnetostriction measurements is demonstrated via measurements on a magnetically frustrated spinel sample.
△ Less
Submitted 29 June, 2018; v1 submitted 3 May, 2018;
originally announced May 2018.
-
Motion of a superconducting loop in an inhomogeneous magnetic field: a didactic experiment
Authors:
Marco Giliberti,
Luca Perotti,
Lucio Rossi
Abstract:
We present an experiment conductive to an understanding of both Faraday's law and the properties of the superconducting state. It consists in the analysis of the motion of a superconducting loop moving under the influence of gravity in an inhomogeneous horizontal magnetic field. Gravity, conservation of magnetic flux, and friction combine to give damped harmonic oscillations. The measured frequenc…
▽ More
We present an experiment conductive to an understanding of both Faraday's law and the properties of the superconducting state. It consists in the analysis of the motion of a superconducting loop moving under the influence of gravity in an inhomogeneous horizontal magnetic field. Gravity, conservation of magnetic flux, and friction combine to give damped harmonic oscillations. The measured frequency of oscillation and the dam** constant as a function of the magnetic field strength (the only free parameter) are in good agreement with the theoretical model.
△ Less
Submitted 10 April, 2018;
originally announced April 2018.
-
Production and Integration of the ATLAS Insertable B-Layer
Authors:
B. Abbott,
J. Albert,
F. Alberti,
M. Alex,
G. Alimonti,
S. Alkire,
P. Allport,
S. Altenheiner,
L. Ancu,
E. Anderssen,
A. Andreani,
A. Andreazza,
B. Axen,
J. Arguin,
M. Backhaus,
G. Balbi,
J. Ballansat,
M. Barbero,
G. Barbier,
A. Bassalat,
R. Bates,
P. Baudin,
M. Battaglia,
T. Beau,
R. Beccherle
, et al. (352 additional authors not shown)
Abstract:
During the shutdown of the CERN Large Hadron Collider in 2013-2014, an additional pixel layer was installed between the existing Pixel detector of the ATLAS experiment and a new, smaller radius beam pipe. The motivation for this new pixel layer, the Insertable B-Layer (IBL), was to maintain or improve the robustness and performance of the ATLAS tracking system, given the higher instantaneous and i…
▽ More
During the shutdown of the CERN Large Hadron Collider in 2013-2014, an additional pixel layer was installed between the existing Pixel detector of the ATLAS experiment and a new, smaller radius beam pipe. The motivation for this new pixel layer, the Insertable B-Layer (IBL), was to maintain or improve the robustness and performance of the ATLAS tracking system, given the higher instantaneous and integrated luminosities realised following the shutdown. Because of the extreme radiation and collision rate environment, several new radiation-tolerant sensor and electronic technologies were utilised for this layer. This paper reports on the IBL construction and integration prior to its operation in the ATLAS detector.
△ Less
Submitted 6 June, 2018; v1 submitted 2 March, 2018;
originally announced March 2018.
-
Accuracy of Flight Altitude Measured with Low-Cost GNSS, Radar and Barometer Sensors: Implications for Airborne Radiometric Surveys
Authors:
Matteo Alberi,
Marica Baldoncini,
Carlo Bottardi,
Enrico Chiarelli,
Giovanni Fiorentini,
Kassandra Giulia Cristina Raptis,
Eugenio Realini,
Mirko Reguzzoni,
Lorenzo Rossi,
Daniele Sampietro,
Virginia Strati,
Fabio Mantovani
Abstract:
Flight height is a fundamental parameter for correcting the gamma signal produced by terrestrial radionuclides measured during airborne surveys. The frontiers of radiometric measurements with UAV require light and accurate altimeters flying at some 10 m from the ground. We equipped an aircraft with seven altimetric sensors (three low-cost GNSS receivers, one inertial measurement unit, one radar al…
▽ More
Flight height is a fundamental parameter for correcting the gamma signal produced by terrestrial radionuclides measured during airborne surveys. The frontiers of radiometric measurements with UAV require light and accurate altimeters flying at some 10 m from the ground. We equipped an aircraft with seven altimetric sensors (three low-cost GNSS receivers, one inertial measurement unit, one radar altimeter and two barometers) and analyzed $\sim$ 3 h of data collected over the sea in the (35-2194) m altitude range. At low altitudes (H $<$ 70 m) radar and barometric altimeters provide the best performances, while GNSS data are used only for barometer calibration as they are affected by a large noise due to the multipath from the sea. The $\sim$ 1 m median standard deviation at 50 m altitude affects the estimation of the ground radioisotope abundances with an uncertainty less than 1.3%. The GNSS double-difference post-processing enhanced significantly the data quality for H $>$ 80 m in terms of both altitude median standard deviation and agreement between the reconstructed and measured GPS antennas distances. Flying at 100 m the estimated uncertainty on the ground total activity due to the uncertainty on the flight height is of the order of 2%.
△ Less
Submitted 8 January, 2018;
originally announced February 2018.
-
First FAMU observation of muon transfer from mu-p atoms to higher-Z elements
Authors:
FAMU Collaboration,
Emiliano Mocchiutti,
Valter Bonvicini,
Rita Carbone,
Miltcho Danailov,
Elena Furlanetto,
Komlan Segbeya Gadedjisso-Tossou,
Daniele Guffanti,
Cecilia Pizzolotto,
Alexandre Rachevski,
Lyubomir Stoychev,
Erik Silvio Vallazza,
Gianluigi Zampa,
Joseph Niemela,
Katsuhiko Ishida,
Andrzej Adamczak,
Giovanni Baccolo,
Roberto Benocci,
Roberto Bertoni,
Maurizio Bonesini,
Francesco Chignoli,
Massimiliano Clemenza,
Alessandro Curioni,
Valter Maggi,
Roberto Mazza
, et al. (32 additional authors not shown)
Abstract:
The FAMU experiment aims to accurately measure the hyperfine splitting of the ground state of the muonic hydrogen atom. A measurement of the transfer rate of muons from hydrogen to heavier gases is necessary for this purpose. In June 2014, within a preliminary experiment, a pressurized gas-target was exposed to the pulsed low-energy muon beam at the RIKEN RAL muon facility (Rutherford Appleton Lab…
▽ More
The FAMU experiment aims to accurately measure the hyperfine splitting of the ground state of the muonic hydrogen atom. A measurement of the transfer rate of muons from hydrogen to heavier gases is necessary for this purpose. In June 2014, within a preliminary experiment, a pressurized gas-target was exposed to the pulsed low-energy muon beam at the RIKEN RAL muon facility (Rutherford Appleton Laboratory, UK). The main goal of the test was the characterization of both the noise induced by the pulsed beam and the X-ray detectors. The apparatus, to some extent rudimental, has served admirably to this task. Technical results have been published that prove the validity of the choices made and pave the way for the next steps. This paper presents the results of physical relevance of measurements of the muon transfer rate to carbon dioxide, oxygen, and argon from non-thermalized excited mu-p atoms. The analysis methodology and the approach to the systematics errors are useful for the subsequent study of the transfer rate as function of the kinetic energy of the mu-p currently under way.
△ Less
Submitted 15 December, 2017; v1 submitted 10 August, 2017;
originally announced August 2017.
-
A low-temperature scanning tunneling microscope capable of microscopy and spectroscopy in a Bitter magnet at up to 34 T
Authors:
W. Tao,
S. Singh,
L. Rossi,
J. W. Gerritsen,
B. L. M. Hendriksen,
A. A. Khajetoorians,
P. C. M. Christianen,
J. C. Maan,
U. Zeitler,
B. Bryant
Abstract:
We present the design and performance of a cryogenic scanning tunneling microscope (STM) which operates inside a water-cooled Bitter magnet, which can attain a magnetic field of up to 38 T. Due to the high vibration environment generated by the magnet cooling water, a uniquely designed STM and vibration dam** system are required. The STM scan head is designed to be as compact and rigid as possib…
▽ More
We present the design and performance of a cryogenic scanning tunneling microscope (STM) which operates inside a water-cooled Bitter magnet, which can attain a magnetic field of up to 38 T. Due to the high vibration environment generated by the magnet cooling water, a uniquely designed STM and vibration dam** system are required. The STM scan head is designed to be as compact and rigid as possible, to minimize the effect of vibrational noise as well as fit the size constraints of the Bitter magnet. The STM uses a differential screw mechanism for coarse tip - sample approach, and operates in helium exchange gas at cryogenic temperatures. The reliability and performance of the STM are demonstrated through topographic imaging and scanning tunneling spectroscopy (STS) on highly oriented pyrolytic graphite (HOPG) at T = 4.2 K and in magnetic fields up to 34 T.
△ Less
Submitted 10 July, 2017;
originally announced July 2017.
-
Machine Layout and Performance
Authors:
D. Angal-Kalinin,
R. Appleby,
G. Arduini,
D. Banfi,
J. Barranco,
N. Biancacci,
D. Brett,
R. Bruce,
O. Bruening,
X. Buffat,
A. Burov,
Y. Cai,
R. Calaga,
A. Chancé,
M. Crouch,
B. Dalena,
H. Day,
R. de Maria,
J. Esteban Muller,
S. Fartoukh,
M. Fitterer,
O. Frasciello,
M. Giovannozzi,
W. Herr,
W. Höfle
, et al. (35 additional authors not shown)
Abstract:
Chapter 2 in High-Luminosity Large Hadron Collider (HL-LHC) : Preliminary Design Report. The Large Hadron Collider (LHC) is one of the largest scientific instruments ever built. Since opening up a new energy frontier for exploration in 2010, it has gathered a global user community of about 7,000 scientists working in fundamental particle physics and the physics of hadronic matter at extreme temper…
▽ More
Chapter 2 in High-Luminosity Large Hadron Collider (HL-LHC) : Preliminary Design Report. The Large Hadron Collider (LHC) is one of the largest scientific instruments ever built. Since opening up a new energy frontier for exploration in 2010, it has gathered a global user community of about 7,000 scientists working in fundamental particle physics and the physics of hadronic matter at extreme temperature and density. To sustain and extend its discovery potential, the LHC will need a major upgrade in the 2020s. This will increase its luminosity (rate of collisions) by a factor of five beyond the original design value and the integrated luminosity (total collisions created) by a factor ten. The LHC is already a highly complex and exquisitely optimised machine so this upgrade must be carefully conceived and will require about ten years to implement. The new configuration, known as High Luminosity LHC (HL-LHC), will rely on a number of key innovations that push accelerator technology beyond its present limits. Among these are cutting-edge 11-12 tesla superconducting magnets, compact superconducting cavities for beam rotation with ultra-precise phase control, new technology and physical processes for beam collimation and 300 metre-long high-power superconducting links with negligible energy dissipation. The present document describes the technologies and components that will be used to realise the project and is intended to serve as the basis for the detailed engineering design of HL-LHC.
△ Less
Submitted 26 May, 2017;
originally announced May 2017.
-
High Luminosity Large Hadron Collider HL-LHC
Authors:
G. Apollinari,
O. Bruening,
T. Nakamoto,
L. Rossi
Abstract:
HL-LHC federates the efforts and R&D of a large international community towards the ambitious HL- LHC objectives and contributes to establishing the European Research Area (ERA) as a focal point of global research cooperation and a leader in frontier knowledge and technologies. HL-LHC relies on strong participation from various partners, in particular from leading US and Japanese laboratories. Thi…
▽ More
HL-LHC federates the efforts and R&D of a large international community towards the ambitious HL- LHC objectives and contributes to establishing the European Research Area (ERA) as a focal point of global research cooperation and a leader in frontier knowledge and technologies. HL-LHC relies on strong participation from various partners, in particular from leading US and Japanese laboratories. This participation will be required for the execution of the construction phase as a global project. In particular, the US LHC Accelerator R&D Program (LARP) has developed some of the key technologies for the HL-LHC, such as the large-aperture niobium-tin ($Nb_{3}Sn) quadrupoles and the crab cavities. The proposed governance model is tailored accordingly and should pave the way for the organization of the construction phase.
△ Less
Submitted 24 May, 2017;
originally announced May 2017.
-
Steps towards the hyperfine splitting measurement of the muonic hydrogen ground state: pulsed muon beam and detection system characterization
Authors:
A. Adamczak,
G. Baccolo,
D. Bakalov,
G. Baldazzi,
R. Bertoni,
M. Bonesini,
V. Bonvicini,
R. Campana,
R. Carbone,
T. Cervi,
F. Chignoli,
M. Clemenza,
L. Colace,
A. Curioni,
M. Danailov,
P. Danev,
I. D'Antone,
A. De,
C. De,
M. De,
M. Furini,
F. Fuschino,
K. Gadejisso-Tossou,
D. Guffanti,
A. Iaciofano
, et al. (30 additional authors not shown)
Abstract:
The high precision measurement of the hyperfine splitting of the muonic-hydrogen atom ground state with pulsed and intense muon beam requires careful technological choices both in the construction of a gas target and of the detectors. In June 2014, the pressurized gas target of the FAMU experiment was exposed to the low energy pulsed muon beam at the RIKEN RAL muon facility. The objectives of the…
▽ More
The high precision measurement of the hyperfine splitting of the muonic-hydrogen atom ground state with pulsed and intense muon beam requires careful technological choices both in the construction of a gas target and of the detectors. In June 2014, the pressurized gas target of the FAMU experiment was exposed to the low energy pulsed muon beam at the RIKEN RAL muon facility. The objectives of the test were the characterization of the target, the hodoscope and the X-ray detectors. The apparatus consisted of a beam hodoscope and X-rays detectors made with high purity Germanium and Lanthanum Bromide crystals. In this paper the experimental setup is described and the results of the detector characterization are presented.
△ Less
Submitted 21 June, 2016; v1 submitted 6 April, 2016;
originally announced April 2016.
-
Linear Accelerator Test Facility at LNF Conceptual Design Report
Authors:
Paolo Valente,
Maurizio Belli,
Bruno Bolli,
Bruno Buonomo,
Sergio Cantarella,
Riccardo Ceccarelli,
Alberto Cecchinelli,
Oreste Cerafogli,
Renato Clementi,
Claudio Di Giulio,
Adolfo Esposito,
Oscar Frasciello,
Luca Foggetta,
Andrea Ghigo,
Simona Incremona,
Franco Iungo,
Roberto Mascio,
Stefano Martelli,
Graziano Piermarini,
Lucia Sabbatini,
Franco Sardone,
Giancarlo Sensolini,
Ruggero Ricci,
Luis Antonio Rossi,
Ugo Rotundo
, et al. (3 additional authors not shown)
Abstract:
Test beam and irradiation facilities are the key enabling infrastructures for research in high energy physics (HEP) and astro-particles. In the last 11 years the Beam-Test Facility (BTF) of the DAΦNE accelerator complex in the Frascati laboratory has gained an important role in the European infrastructures devoted to the development and testing of particle detectors. At the same time the BTF opera…
▽ More
Test beam and irradiation facilities are the key enabling infrastructures for research in high energy physics (HEP) and astro-particles. In the last 11 years the Beam-Test Facility (BTF) of the DAΦNE accelerator complex in the Frascati laboratory has gained an important role in the European infrastructures devoted to the development and testing of particle detectors. At the same time the BTF operation has been largely shadowed, in terms of resources, by the running of the DAΦNE electron-positron collider. The present proposal is aimed at improving the present performance of the facility from two different points of view: extending the range of application for the LINAC beam extracted to the BTF lines, in particular in the (in some sense opposite) directions of hosting fundamental physics and providing electron irradiation also for industrial users; extending the life of the LINAC beyond or independently from its use as injector of the DAΦNE collider, as it is also a key element of the electron/positron beam facility. The main lines of these two developments can be identified as: consolidation of the LINAC infrastructure, in order to guarantee a stable operation in the longer term; upgrade of the LINAC energy, in order to increase the facility capability (especially for the almost unique extracted positron beam); doubling of the BTF beam-lines, in order to cope with the signicant increase of users due to the much wider range of applications.
△ Less
Submitted 17 March, 2016;
originally announced March 2016.
-
Progmosis: Evaluating Risky Individual Behavior During Epidemics Using Mobile Network Data
Authors:
Antonio Lima,
Veljko Pejovic,
Luca Rossi,
Mirco Musolesi,
Marta Gonzalez
Abstract:
The possibility to analyze, quantify and forecast epidemic outbreaks is fundamental when devising effective disease containment strategies. Policy makers are faced with the intricate task of drafting realistically implementable policies that strike a balance between risk management and cost. Two major techniques policy makers have at their disposal are: epidemic modeling and contact tracing. Model…
▽ More
The possibility to analyze, quantify and forecast epidemic outbreaks is fundamental when devising effective disease containment strategies. Policy makers are faced with the intricate task of drafting realistically implementable policies that strike a balance between risk management and cost. Two major techniques policy makers have at their disposal are: epidemic modeling and contact tracing. Models are used to forecast the evolution of the epidemic both globally and regionally, while contact tracing is used to reconstruct the chain of people who have been potentially infected, so that they can be tested, isolated and treated immediately. However, both techniques might provide limited information, especially during an already advanced crisis when the need for action is urgent.
In this paper we propose an alternative approach that goes beyond epidemic modeling and contact tracing, and leverages behavioral data generated by mobile carrier networks to evaluate contagion risk on a per-user basis. The individual risk represents the loss incurred by not isolating or treating a specific person, both in terms of how likely it is for this person to spread the disease as well as how many secondary infections it will cause. To this aim, we develop a model, named Progmosis, which quantifies this risk based on movement and regional aggregated statistics about infection rates. We develop and release an open-source tool that calculates this risk based on cellular network events. We simulate a realistic epidemic scenarios, based on an Ebola virus outbreak; we find that gradually restricting the mobility of a subset of individuals reduces the number of infected people after 30 days by 24%.
△ Less
Submitted 6 April, 2015;
originally announced April 2015.
-
Manufacturing and Testing of Accelerator Superconducting Magnets
Authors:
L Rossi
Abstract:
Manufacturing of superconducting magnet for accelerators is a quite complex process that is not yet fully industrialized. In this paper, after a short history of the evolution of the magnet design and construction, we review the main characteristics of the accelerator magnets having an impact on the construction technology. We put in evidence how the design and component quality impact on construc…
▽ More
Manufacturing of superconducting magnet for accelerators is a quite complex process that is not yet fully industrialized. In this paper, after a short history of the evolution of the magnet design and construction, we review the main characteristics of the accelerator magnets having an impact on the construction technology. We put in evidence how the design and component quality impact on construction and why the final product calls for a total-quality approach. LHC experience is widely discussed and main lessons are spelled out. Then the new Nb3Sn technology, under development for the next generation magnet construction, is outlined. Finally, we briefly review the testing procedure of accelerator superconducting magnets, underlining the close connection with the design validation and with the manufacturing process.
△ Less
Submitted 28 January, 2015;
originally announced January 2015.
-
Spatio-Temporal Techniques for User Identification by means of GPS Mobility Data
Authors:
Luca Rossi,
James Walker,
Mirco Musolesi
Abstract:
One of the greatest concerns related to the popularity of GPS-enabled devices and applications is the increasing availability of the personal location information generated by them and shared with application and service providers. Moreover, people tend to have regular routines and be characterized by a set of "significant places", thus making it possible to identify a user from his/her mobility d…
▽ More
One of the greatest concerns related to the popularity of GPS-enabled devices and applications is the increasing availability of the personal location information generated by them and shared with application and service providers. Moreover, people tend to have regular routines and be characterized by a set of "significant places", thus making it possible to identify a user from his/her mobility data.
In this paper we present a series of techniques for identifying individuals from their GPS movements. More specifically, we study the uniqueness of GPS information for three popular datasets, and we provide a detailed analysis of the discriminatory power of speed, direction and distance of travel. Most importantly, we present a simple yet effective technique for the identification of users from location information that are not included in the original dataset used for training, thus raising important privacy concerns for the management of location datasets.
△ Less
Submitted 17 July, 2015; v1 submitted 27 January, 2015;
originally announced January 2015.
-
Towards effective visual analytics on multiplex and multilayer networks
Authors:
Matteo Magnani,
Luca Rossi
Abstract:
In this article we discuss visualisation strategies for multiplex networks. Since Moreno's early works on network analysis, visualisation has been one of the main ways to understand networks thanks to its ability to summarise a complex structure into a single representation highlighting multiple properties of the data. However, despite the large renewed interest in the analysis of multiplex networ…
▽ More
In this article we discuss visualisation strategies for multiplex networks. Since Moreno's early works on network analysis, visualisation has been one of the main ways to understand networks thanks to its ability to summarise a complex structure into a single representation highlighting multiple properties of the data. However, despite the large renewed interest in the analysis of multiplex networks, no study has proposed specialised visualisation approaches for this context and traditional methods are typically applied instead. In this paper we initiate a critical and structured discussion of this topic, and claim that the development of specific visualisation methods for multiplex networks will be one of the main drivers pushing current research results into daily practice.
△ Less
Submitted 7 January, 2015;
originally announced January 2015.
-
Coding Together at Scale: GitHub as a Collaborative Social Network
Authors:
Antonio Lima,
Luca Rossi,
Mirco Musolesi
Abstract:
GitHub is the most popular repository for open source code. It has more than 3.5 million users, as the company declared in April 2013, and more than 10 million repositories, as of December 2013. It has a publicly accessible API and, since March 2012, it also publishes a stream of all the events occurring on public projects. Interactions among GitHub users are of a complex nature and take place in…
▽ More
GitHub is the most popular repository for open source code. It has more than 3.5 million users, as the company declared in April 2013, and more than 10 million repositories, as of December 2013. It has a publicly accessible API and, since March 2012, it also publishes a stream of all the events occurring on public projects. Interactions among GitHub users are of a complex nature and take place in different forms. Developers create and fork repositories, push code, approve code pushed by others, bookmark their favorite projects and follow other developers to keep track of their activities.
In this paper we present a characterization of GitHub, as both a social network and a collaborative platform. To the best of our knowledge, this is the first quantitative study about the interactions happening on GitHub. We analyze the logs from the service over 18 months (between March 11, 2012 and September 11, 2013), describing 183.54 million events and we obtain information about 2.19 million users and 5.68 million repositories, both growing linearly in time. We show that the distributions of the number of contributors per project, watchers per project and followers per user show a power-law-like shape. We analyze social ties and repository-mediated collaboration patterns, and we observe a remarkably low level of reciprocity of the social connections. We also measure the activity of each user in terms of authored events and we observe that very active users do not necessarily have a large number of followers. Finally, we provide a geographic characterization of the centers of activity and we investigate how distance influences collaboration.
△ Less
Submitted 9 July, 2014;
originally announced July 2014.
-
Collective attention in the age of (mis)information
Authors:
Delia Mocanu,
Luca Rossi,
Qian Zhang,
Màrton Karsai,
Walter Quattrociocchi
Abstract:
In this work we study, on a sample of 2.3 million individuals, how Facebook users consumed different information at the edge of political discussion and news during the last Italian electoral competition. Pages are categorized, according to their topics and the communities of interests they pertain to, in a) alternative information sources (diffusing topics that are neglected by science and main s…
▽ More
In this work we study, on a sample of 2.3 million individuals, how Facebook users consumed different information at the edge of political discussion and news during the last Italian electoral competition. Pages are categorized, according to their topics and the communities of interests they pertain to, in a) alternative information sources (diffusing topics that are neglected by science and main stream media); b) online political activism; and c) main stream media. We show that attention patterns are similar despite the different qualitative nature of the information, meaning that unsubstantiated claims (mainly conspiracy theories) reverberate for as long as other information. Finally, we categorize users according to their interaction patterns among the different topics and measure how a sample of this social ecosystem (1279 users) responded to the injection of 2788 false information posts. Our analysis reveals that users which are prominently interacting with alternative information sources (i.e. more exposed to unsubstantiated claims) are more prone to interact with false claims.
△ Less
Submitted 13 March, 2014;
originally announced March 2014.
-
Planning the Future of U.S. Particle Physics (Snowmass 2013): Chapter 6: Accelerator Capabilities
Authors:
W. A. Barletta,
M. Bai,
M. Battaglia,
O. Bruning,
J. Byrd,
R. Ent,
J. Flanagan,
W. Gai,
J. Galambos,
G. Hoffstaetter,
M. Hogan,
M. Klute,
S. Nagaitsev,
M. Palmer,
S. Prestemon,
T. Roser,
L. Rossi,
V. Shiltsev,
G. Varner,
K. Yokoya
Abstract:
These reports present the results of the 2013 Community Summer Study of the APS Division of Particles and Fields ("Snowmass 2013") on the future program of particle physics in the U.S. Chapter 6, on Accelerator Capabilities, discusses the future progress of accelerator technology, including issues for high-energy hadron and lepton colliders, high-intensity beams, electron-ion colliders, and necess…
▽ More
These reports present the results of the 2013 Community Summer Study of the APS Division of Particles and Fields ("Snowmass 2013") on the future program of particle physics in the U.S. Chapter 6, on Accelerator Capabilities, discusses the future progress of accelerator technology, including issues for high-energy hadron and lepton colliders, high-intensity beams, electron-ion colliders, and necessary R&D for future accelerator technologies.
△ Less
Submitted 23 January, 2014;
originally announced January 2014.
-
High Energy Hadron Colliders - Report of the Snowmass 2013 Frontier Capabilities Hadron Collider Study Group
Authors:
William Barletta,
Marco Battaglia,
Markus Klute,
Michelangelo Mangano,
Soren Prestemon,
Lucio Rossi,
Peter Skands
Abstract:
High energy hadron colliders have been the tools for discovery at the highest mass scales of the energy frontier from the SppS, to the Tevatron and now the LHC. This report reviews future hadron collider projects from the high luminosity LHC upgrade to a 100 TeV hadron collider in a large tunnel, the underlying technology challenges and R&D directions and presents a series of recommendations for t…
▽ More
High energy hadron colliders have been the tools for discovery at the highest mass scales of the energy frontier from the SppS, to the Tevatron and now the LHC. This report reviews future hadron collider projects from the high luminosity LHC upgrade to a 100 TeV hadron collider in a large tunnel, the underlying technology challenges and R&D directions and presents a series of recommendations for the future development of hadron collider research and technology.
△ Less
Submitted 1 October, 2013;
originally announced October 2013.
-
Combinatorial Analysis of Multiple Networks
Authors:
Matteo Magnani,
Barbora Micenkova,
Luca Rossi
Abstract:
The study of complex networks has been historically based on simple graph data models representing relationships between individuals. However, often reality cannot be accurately captured by a flat graph model. This has led to the development of multi-layer networks. These models have the potential of becoming the reference tools in network data analysis, but require the parallel development of spe…
▽ More
The study of complex networks has been historically based on simple graph data models representing relationships between individuals. However, often reality cannot be accurately captured by a flat graph model. This has led to the development of multi-layer networks. These models have the potential of becoming the reference tools in network data analysis, but require the parallel development of specific analysis methods explicitly exploiting the information hidden in-between the layers and the availability of a critical mass of reference data to experiment with the tools and investigate the real-world organization of these complex systems. In this work we introduce a real-world layered network combining different kinds of online and offline relationships, and present an innovative methodology and related analysis tools suggesting the existence of hidden motifs traversing and correlating different representation layers. We also introduce a notion of betweenness centrality for multiple networks. While some preliminary experimental evidence is reported, our hypotheses are still largely unverified, and in our opinion this calls for the availability of new analysis methods but also new reference multi-layer social network data.
△ Less
Submitted 20 March, 2013;
originally announced March 2013.
-
Multi-Stratum Networks: toward a unified model of on-line identities
Authors:
Matteo Magnani,
Luca Rossi
Abstract:
One of the reasons behind the success of Social Network Analysis is its simple and general graph model made of nodes (representing individuals) and ties. However, when we focus on our daily on-line experience we must confront a more complex scenario: people inhabitate several on-line spaces interacting to several communities active on various technological infrastructures like Twitter, Facebook, Y…
▽ More
One of the reasons behind the success of Social Network Analysis is its simple and general graph model made of nodes (representing individuals) and ties. However, when we focus on our daily on-line experience we must confront a more complex scenario: people inhabitate several on-line spaces interacting to several communities active on various technological infrastructures like Twitter, Facebook, YouTube or FourSquare and with distinct social objectives. This constitutes a complex network of interconnected networks where users' identities are spread and where information propagates navigating through different communities and social platforms. In this article we introduce a model for this layered scenario that we call multi-stratum network. Through a theoretical discussion and the analysis of real-world data we show how not only focusing on a single network may provide a very partial understanding of the role of its users, but also that considering all the networks separately may not reveal the information contained in the whole multi-stratum model.
△ Less
Submitted 1 November, 2012;
originally announced November 2012.
-
Conceptual design of 20 T dipoles for high-energy LHC
Authors:
L. Rossi,
E. Todesco
Abstract:
Availability of 20 T operational field dipole magnets would open the way for a 16.5 TeV beam energy accelerator in the LHC tunnel. Here we discuss the main issues related to the magnet design of this extremely challenging dipole: main constraints, superconductor choice, coil lay-out, iron, forces and stresses, and field quality. A tentative cost estimate is also given. The present technology, base…
▽ More
Availability of 20 T operational field dipole magnets would open the way for a 16.5 TeV beam energy accelerator in the LHC tunnel. Here we discuss the main issues related to the magnet design of this extremely challenging dipole: main constraints, superconductor choice, coil lay-out, iron, forces and stresses, and field quality. A tentative cost estimate is also given. The present technology, based on Nb-Ti and now near to be extended to Nb3Sn superconductor, would allow reaching 15 T operational field. To reach 20 T, HTS conductors capable to carry 400 A/mm2 at 15-20 T under transverse stress of 150-200 MPa are an essential element.
△ Less
Submitted 8 August, 2011;
originally announced August 2011.
-
HE-LHC beam-parameters, optics and beam-dynamics issues
Authors:
O. Brüning,
O. Dominguez,
S. Myers,
L. Rossi,
E. Todesco,
F. Zimmermann
Abstract:
The Higher-Energy LHC (HE-LHC) should collide two proton beams of 16.5-TeV energy, circulating in the LHC tunnel. We discuss the main parameter choices, as well as some optics and beam dynamics issues, in particular the time evolution of emittances, beam-beam tune shift and luminosity, with and without controlled emittance blow up, considering various constraints, and the quadrupole-magnet paramet…
▽ More
The Higher-Energy LHC (HE-LHC) should collide two proton beams of 16.5-TeV energy, circulating in the LHC tunnel. We discuss the main parameter choices, as well as some optics and beam dynamics issues, in particular the time evolution of emittances, beam-beam tune shift and luminosity, with and without controlled emittance blow up, considering various constraints, and the quadrupole-magnet parameters for arcs and interaction regions.
△ Less
Submitted 8 August, 2011;
originally announced August 2011.
-
Kinetics of the thermal degradation of Erica arborea by DSC: Hybrid kinetic method
Authors:
Dominique Cancellieri,
Eric Leoni,
Jean Louis Rossi
Abstract:
The scope of this work was the determination of kinetic parameters of the thermal oxidative degradation of a Mediterranean scrub using a hybrid method developed at the laboratory. DSC and TGA were used in this study under air swee** to record oxidative reactions. Two dominating and overlapped exothermic peaks were recorded in DSC and individualized using an experimental and numerical separatio…
▽ More
The scope of this work was the determination of kinetic parameters of the thermal oxidative degradation of a Mediterranean scrub using a hybrid method developed at the laboratory. DSC and TGA were used in this study under air swee** to record oxidative reactions. Two dominating and overlapped exothermic peaks were recorded in DSC and individualized using an experimental and numerical separation. This first stage allowed obtaining the enthalpy variation of each exothermic phenomenon. In a second time, a model free method was applied on each isolated curve to determine the apparent activation energies. A reactional kinetic scheme was proposed for the global exotherm composed of two independent and consecutive reactions. In fine mean values of enthalpy variation and apparent activation energy previously determined were injected in a model fitting method to obtain the reaction order and the preexponential factor of each oxidative reaction. We plan to use these data in a sub-model to be integrated in a wildland fire spread model.
△ Less
Submitted 18 November, 2008;
originally announced November 2008.
-
The Origin of Semiconductor Physics in Italy: 1945 - 1965
Authors:
Marco Luca Rossi
Abstract:
The activities carried out by Italian physicists in the field of semiconductor physics during the period spanning from 1945 to the foundation of the National Group of Structure of the Matter (GNSM, 1965) are reviewed within their historical context. Until the fifties, the Italian research was only marginally involved, if at all, in the main streams of advancement in solid state physics. Starting…
▽ More
The activities carried out by Italian physicists in the field of semiconductor physics during the period spanning from 1945 to the foundation of the National Group of Structure of the Matter (GNSM, 1965) are reviewed within their historical context. Until the fifties, the Italian research was only marginally involved, if at all, in the main streams of advancement in solid state physics. Starting from the early fifties, an interest for technical applications of the newly introduced semiconductor devices began to grow in the electronic engineering community. In the following years, the birth of a few experimental and theoretical groups lead by highly motivated scientists (some of them with international experience) allowed to deal with the main topics related to condensed matter and semiconductor phenomena. The work developed by these "pioneers", discussed in this paper, represented an invaluable contribution for the new generations of physicists in this research field.
△ Less
Submitted 25 May, 2008;
originally announced May 2008.