-
Electric-Field Control of Magnetic Skyrmion Chirality in a Centrosymmetric 2D van der Waals Magnet
Authors:
Myung-Geun Han,
Joachim Dahl Thomsen,
John P. Philbin,
Junsik Mun,
Eugene Park,
Fernando Camino,
Lukáš Děkanovský,
Chuhang Liu,
Zdenek Sofer,
Prineha Narang,
Frances M. Ross,
Yimei Zhu
Abstract:
Two-dimensional van der Waals magnets hosting topological magnetic textures, such as skyrmions, show promise for applications in spintronics and quantum computing. Electrical control of these topological spin textures would enable novel devices with enhanced performance and functionality. Here, using electron microscopy combined with in situ electric and magnetic biasing, we show that the skyrmion…
▽ More
Two-dimensional van der Waals magnets hosting topological magnetic textures, such as skyrmions, show promise for applications in spintronics and quantum computing. Electrical control of these topological spin textures would enable novel devices with enhanced performance and functionality. Here, using electron microscopy combined with in situ electric and magnetic biasing, we show that the skyrmion chirality, whether left-handed or right-handed, in insulating Cr2Ge2Te6, is controlled by external electric field direction applied during magnetic field cooling process. The electric-field-tuned chirality remains stable, even amid variations in magnetic and electric fields. Our theoretical investigation reveals that nonzero Dzyaloshinskii-Moriya interactions between the nearest neighbors, induced by the external electric field, change their sign upon reversing the electric field direction, thereby facilitating chirality selection. The electrical control of magnetic chirality demonstrated in this study can be extended to other non-metallic centrosymmetric skyrmion-hosting magnets, opening avenues for future device designs in topological spintronics and quantum computing.
△ Less
Submitted 2 June, 2024;
originally announced June 2024.
-
LIGO operates with quantum noise below the Standard Quantum Limit
Authors:
Wenxuan Jia,
Victoria Xu,
Kevin Kuns,
Masayuki Nakano,
Lisa Barsotti,
Matthew Evans,
Nergis Mavalvala,
Rich Abbott,
Ibrahim Abouelfettouh,
Rana Adhikari,
Alena Ananyeva,
Stephen Appert,
Koji Arai,
Naoki Aritomi,
Stuart Aston,
Matthew Ball,
Stefan Ballmer,
David Barker,
Beverly Berger,
Joseph Betzwieser,
Dripta Bhattacharjee,
Garilynn Billingsley,
Nina Bode,
Edgard Bonilla,
Vladimir Bossilkov
, et al. (146 additional authors not shown)
Abstract:
Precision measurements of space and time, like those made by the detectors of the Laser Interferometer Gravitational-wave Observatory (LIGO), are often confronted with fundamental limitations imposed by quantum mechanics. The Heisenberg uncertainty principle dictates that the position and momentum of an object cannot both be precisely measured, giving rise to an apparent limitation called the Stan…
▽ More
Precision measurements of space and time, like those made by the detectors of the Laser Interferometer Gravitational-wave Observatory (LIGO), are often confronted with fundamental limitations imposed by quantum mechanics. The Heisenberg uncertainty principle dictates that the position and momentum of an object cannot both be precisely measured, giving rise to an apparent limitation called the Standard Quantum Limit (SQL). Reducing quantum noise below the SQL in gravitational-wave detectors, where photons are used to continuously measure the positions of freely falling mirrors, has been an active area of research for decades. Here we show how the LIGO A+ upgrade reduced the detectors' quantum noise below the SQL by up to 3 dB while achieving a broadband sensitivity improvement, more than two decades after this possibility was first presented.
△ Less
Submitted 22 April, 2024;
originally announced April 2024.
-
Absolute Doubly Differential Angular Sputtering Yields for 20 keV Kr+ on Polycrystalline Cu
Authors:
Caixia Bu,
Liam S. Morrissey,
Benjamin C. Bostick,
Matthew H. Burger,
Kyle P. Bowen,
Steven N. Chillrud,
Deborah L. Domingue,
Catherine A. Dukes,
Denton S. Ebel,
George E. Harlow,
Pierre-Michel Hillenbrand,
Dmitry A. Ivanov,
Rosemary M. Killen,
James M. Ross,
Daniel Schury,
Orenthal J. Tucker,
Xavier Urbain,
Ruitian Zhang,
Daniel W. Savin
Abstract:
We have measured the absolute doubly differential angular sputtering yield for 20 keV Kr+ impacting a polycrystalline Cu slab at an incidence angle of θi = 45° relative to the surface normal. Sputtered Cu atoms were captured using collectors mounted on a half dome above the sample, and the sputtering distribution was measured as a function of the sputtering polar, θs, and azimuthal, phi, angles. A…
▽ More
We have measured the absolute doubly differential angular sputtering yield for 20 keV Kr+ impacting a polycrystalline Cu slab at an incidence angle of θi = 45° relative to the surface normal. Sputtered Cu atoms were captured using collectors mounted on a half dome above the sample, and the sputtering distribution was measured as a function of the sputtering polar, θs, and azimuthal, phi, angles. Absolute results of the sputtering yield were determined from the mass gain of each collector, the ion dose, and the solid angle subtended, after irradiation to a total fluence of ~ 1 x 10^18 ions/cm^2. Our approach overcomes shortcomings of commonly used methods that only provide relative yields as a function of θs in the incidence plane (defined by the ion velocity and the surface normal). Our experimental results display an azimuthal variation that increases with increasing θs and is clearly discrepant with simulations using binary collision theory. We attribute the observed azimuthal anisotropy to ion-induced formation of micro- and nano-scale surface features that suppress the sputtering yield through shadowing and redeposition effects, neither of which are accounted for in the simulations. Our experimental results demonstrate the importance of doubly differential angular sputtering studies to probe ion sputtering processes at a fundamental level and to explore the effect of ion-beam-generated surface roughness.
△ Less
Submitted 19 December, 2023;
originally announced December 2023.
-
Macroscopic Manifestations of Traffic Waves in Microscopic Models
Authors:
Nour Khoudari,
Rabie Ramadan,
Megan Ross,
Benjamin Seibold
Abstract:
Traffic waves can rise even from single lane car-following behaviour. To better understand and mitigate traffic waves, it is necessary to use analytical tools like mathematical models, data analysis, and micro-simulations that can capture the dynamics of real traffic flow. In this study, we isolate car-following dynamics and present a systematic hierarchy of tests that connect the microscopic scal…
▽ More
Traffic waves can rise even from single lane car-following behaviour. To better understand and mitigate traffic waves, it is necessary to use analytical tools like mathematical models, data analysis, and micro-simulations that can capture the dynamics of real traffic flow. In this study, we isolate car-following dynamics and present a systematic hierarchy of tests that connect the microscopic scale with the meaningful macroscopic effective state in the presence of waves. This allows insights with precise attributable cause-to-effect relationships of specific observed traffic patterns. We establish a principled way of generating macroscopic flow quantities from microscopic models in the unstable regime. Those quantities are then used to study how the corresponding non-equilibrium wave structures manifest in the fundamental diagram, based on three basic scenarios that can serve as building blocks for understanding more complex micro-simulation studies. Finally, this study gives insight on the shapes of the reduced fundamental diagrams for different commonly used microscopic models.
△ Less
Submitted 8 October, 2023;
originally announced October 2023.
-
A Vacuum-Compatible Cylindrical Inertial Rotation Sensor with Picoradian Sensitivity
Authors:
M. P. Ross,
J. van Dongen,
Y. Huang,
P. Zhou,
Y. Chowdhury,
S. K. Apple,
C. M. Mow-Lowry,
A. L. Mitchell,
N. A. Holland,
B. Lantz,
E. Bonilla,
A. Engl,
A. Pele,
D. Griffith,
E. Sanchez,
E. A. Shaw,
C. Gettings,
J. H. Gundlach
Abstract:
We describe an inertial rotation sensor with a 30-cm cylindrical proof-mass suspended from a pair of 14-$μ$m thick BeCu flexures. The angle between the proof-mass and support structure is measured with a pair of homodyne interferometers which achieve a noise level of $\sim 5\ \text{prad}/\sqrt{\text{Hz}}$. The sensor is entirely made of vacuum compatible materials and the center of mass can be adj…
▽ More
We describe an inertial rotation sensor with a 30-cm cylindrical proof-mass suspended from a pair of 14-$μ$m thick BeCu flexures. The angle between the proof-mass and support structure is measured with a pair of homodyne interferometers which achieve a noise level of $\sim 5\ \text{prad}/\sqrt{\text{Hz}}$. The sensor is entirely made of vacuum compatible materials and the center of mass can be adjusted remotely.
△ Less
Submitted 14 September, 2023; v1 submitted 11 July, 2023;
originally announced July 2023.
-
Evaluation of predictive correlation between flux expulsion and grain growth for superconducting radio frequency cavities
Authors:
Zu Hawn Sung,
Paulina Kulyavtsev,
Martina Martinello,
Dan Gonnella,
Marc Ross,
Sam Posen
Abstract:
A series of experiments were carried out in an effort to develop a simple method for predicting magnetic flux expulsion behavior of high purity niobium used to fabricate superconducting radio frequency (SRF) cavities. Using conventional metallographic characterizations in conjunction with high spatial resolution electron backscattered diffraction-orientation imaging microscopy (EBSD-OIM), we found…
▽ More
A series of experiments were carried out in an effort to develop a simple method for predicting magnetic flux expulsion behavior of high purity niobium used to fabricate superconducting radio frequency (SRF) cavities. Using conventional metallographic characterizations in conjunction with high spatial resolution electron backscattered diffraction-orientation imaging microscopy (EBSD-OIM), we found that the flux expulsion behavior of 1.3 GHz single cell SRF Nb cavities is significantly associated with the grain growth of the Nb material during heat treatment. Most of Nb grains rapidly grew during 900C heat treatment, and likely full-recrystallized with 1000C HT. With comparison of the magnetic flux expulsion ratio (Bsc/Bnc) at dT = 5 K, the flux expulsion efficiency of the cavities increases along with increasing of grain size. Most interestingly, 900C HT shows a roughly linear trend that suggests this criterion could be used to predict appropriate heat treatment temperature for sufficient flux expulsion behavior in SRF-grade Nb. This result would be used to see if flux expulsion can be predicted by examining the materials coming from the Nb vendor, prior to cavity fabrication.
△ Less
Submitted 24 March, 2023;
originally announced March 2023.
-
A Pseudo Plane-wave Gravitational Calibrator for Gravitational Wave Observatories
Authors:
M. P. Ross,
J. H. Gundlach,
E. G. Adelberger,
C. M. Weller,
E. A. Shaw,
C. Gettings,
J. Kissel,
T. Mistry,
L. Datrier,
E. Daw,
M. Hendry
Abstract:
The precisions of existing gravitational calibrators for gravitational wave observatories are limited by their dependence on the relative position between the calibrators and the observatory's test masses. Here we present a novel geometry consisting of four quadrupole rotors placed at the vertices of a rectangle centered on the test mass. The phases and rotation directions are selected to produce…
▽ More
The precisions of existing gravitational calibrators for gravitational wave observatories are limited by their dependence on the relative position between the calibrators and the observatory's test masses. Here we present a novel geometry consisting of four quadrupole rotors placed at the vertices of a rectangle centered on the test mass. The phases and rotation directions are selected to produce a pseudo plane-wave sinusoidal gravitational acceleration with amplitude of ~ 100 fm/s^2. We show that this acceleration only has minimal dependence on the test mass position relative to the rotor array and can yield 0.15% acceleration amplitude uncertainty while tolerating a 1-cm test mass position uncertainty. The acceleration can be directed precisely along the optical axis of the interferometer arm and applies no torque on the test mass. In addition, the small size of the rotors has significant engineering and safety benefits.
△ Less
Submitted 25 January, 2023;
originally announced January 2023.
-
Kinetic control for planar oxidation of MoS$_2$
Authors:
Kate Reidy,
Wouter Mortelmans,
Seong Soon Jo,
Aubrey Penn,
Baoming Wang,
Alexandre Foucher,
Frances M. Ross,
R. Jaramillo
Abstract:
Layered transition metal dichalcogenide (TMD) semiconductors oxidize readily in a variety of conditions, and a thorough understanding of this oxide formation is required for the advancement of TMD-based microelectronics. Here, we combine scanning transmission electron microscopy (STEM) with spectroscopic ellipsometry (SE) to investigate oxide formation at the atomic scale of the most widely-studie…
▽ More
Layered transition metal dichalcogenide (TMD) semiconductors oxidize readily in a variety of conditions, and a thorough understanding of this oxide formation is required for the advancement of TMD-based microelectronics. Here, we combine scanning transmission electron microscopy (STEM) with spectroscopic ellipsometry (SE) to investigate oxide formation at the atomic scale of the most widely-studied TMD, MoS$_2$. We find that aggressive thermal oxidation results in $α$-phase plate-like crystalline MoO$_3$ with sharp interfaces, voids, and a textured alignment with the underlying MoS$_2$. Experiments with remote substrates and patterned MoS$_2$ prove that thermal oxidation proceeds via vapor-phase mass transport and redeposition - a challenge to forming thin, conformal planar oxide films. We accelerate the kinetics of oxidation relative to the kinetics of mass transport using a non-thermal oxygen plasma process, to form a smooth and conformal amorphous oxide. The resulting amorphous MoO$_3$ films can be grown several nanometers thick, and we calibrate the oxidation rate for varying plasma processing conditions. Our results illustrate how TMD semiconductor oxidation differs significantly from oxidation of legacy semiconductors, most notably silicon, and provide quantitative guidance for managing both the atomic scale structure and thin film morphology of oxides in the design and processing of MoS$_2$ semiconductor devices.
△ Less
Submitted 30 November, 2022;
originally announced November 2022.
-
Near-Infrared plasmon induced hot electron extraction evidence in an indium tin oxide nanoparticle / monolayer molybdenum disulphide heterostructure
Authors:
Michele Guizzardi,
Michele Ghini,
Andrea Villa,
Luca Rebecchi,
Qiuyang Li,
Giorgio Mancini,
Fabio Marangi,
Aaron M. Ross,
Xiaoyang Zhu,
Ilka Kriegel,
Francesco Scotognella
Abstract:
In this work, we observe plasmon induced hot electron extraction in a heterojunction between indium tin oxide nanocrystals and monolayer molybdenum disulphide. We study the sample with ultrafast differential transmission exciting the sample at 1750 nm where the intense localized plasmon surface resonance of the indium tin oxide nanocrystals is and where the monolayer molybdenum disulphide does not…
▽ More
In this work, we observe plasmon induced hot electron extraction in a heterojunction between indium tin oxide nanocrystals and monolayer molybdenum disulphide. We study the sample with ultrafast differential transmission exciting the sample at 1750 nm where the intense localized plasmon surface resonance of the indium tin oxide nanocrystals is and where the monolayer molybdenum disulphide does not absorb light. With the excitation at 1750 nm we observe the excitonic features of molybdenum disulphide in the visible range, close to the exciton of molybdenum disulphide. Such phenomenon can be ascribed to a charge transfer between indium tin oxide nanocrystals and monolayer molybdenum disulphide upon plasmon excitation. These results are a first step towards the implementation of near infrared plasmonic materials for photoconversion.
△ Less
Submitted 17 July, 2022; v1 submitted 9 July, 2022;
originally announced July 2022.
-
A Cryogenic Torsion Balance Using a Liquid-Cryogen Free, Ultra-Low Vibration Cryostat
Authors:
S. M. Fleischer,
M. P. Ross,
K. Venkateswara,
C. A. Hagedorn,
E. A. Shaw,
E. Swanson,
B. R. Heckel,
J. H. Gundlach
Abstract:
We describe a liquid-cryogen free cryostat with ultra-low vibration levels which allows for continuous operation of a torsion balance at cryogenic temperatures. The apparatus uses a commercially available two-stage pulse-tube cooler and passive vibration isolation. The torsion balance exhibits torque noise levels lower than room temperature thermal noise by a factor of about four in the frequency…
▽ More
We describe a liquid-cryogen free cryostat with ultra-low vibration levels which allows for continuous operation of a torsion balance at cryogenic temperatures. The apparatus uses a commercially available two-stage pulse-tube cooler and passive vibration isolation. The torsion balance exhibits torque noise levels lower than room temperature thermal noise by a factor of about four in the frequency range of 3-10mHz, limited by residual seismic motion and by radiative heating of the pendulum body. In addition to lowering thermal noise below room-temperature limits, the low-temperature environment enables novel torsion balance experiments. Currently, the maximum duration of a continuous measurement run is limited by accumulation of cryogenic surface contamination on the optical elements inside the cryostat.
△ Less
Submitted 8 November, 2022; v1 submitted 6 June, 2022;
originally announced June 2022.
-
Key directions for research and development of superconducting radio frequency cavities
Authors:
S. Belomestnykh,
S. Posen,
D. Bafia,
S. Balachandran,
M. Bertucci,
A. Burrill,
A. Cano,
M. Checchin,
G. Ciovati,
L. D. Cooley,
G. Dalla Lana Semione,
J. Delayen,
G. Eremeev,
F. Furuta,
F. Gerigk,
B. Giaccone,
D. Gonnella,
A. Grassellino,
A. Gurevich,
W. Hillert,
M. Iavarone,
J. Knobloch,
T. Kubo,
W. K. Kwok,
R. Laxdal
, et al. (31 additional authors not shown)
Abstract:
Radio frequency superconductivity is a cornerstone technology for many future HEP particle accelerators and experiments from colliders to proton drivers for neutrino facilities to searches for dark matter. While the performance of superconducting RF (SRF) cavities has improved significantly over the last decades, and the SRF technology has enabled new applications, the proposed HEP facilities and…
▽ More
Radio frequency superconductivity is a cornerstone technology for many future HEP particle accelerators and experiments from colliders to proton drivers for neutrino facilities to searches for dark matter. While the performance of superconducting RF (SRF) cavities has improved significantly over the last decades, and the SRF technology has enabled new applications, the proposed HEP facilities and experiments pose new challenges. To address these challenges, the field continues to generate new ideas and there seems to be a vast room for improvements. In this paper we discuss the key research directions that are aligned with and address the future HEP needs.
△ Less
Submitted 21 August, 2022; v1 submitted 3 April, 2022;
originally announced April 2022.
-
Plasma Processing for In-Situ Field Emission Mitigation of Superconducting Radiofrequency (SRF) Cryomodules
Authors:
M. Martinello,
P. Berrutti,
B. Giaccone,
S. Belomestnykh,
M. Checchin,
G. V. Eremeev,
A. Grassellino,
T. Khabibouilline,
A. Netepenko,
R. Pilipenko,
A. Romanenko,
S. Posen,
G. Wu,
D. Gonnella,
M. Ross,
J. T. Maniscalco,
T. Powers
Abstract:
Field emission (FE) is one of the main limiting factors of superconducting radio-frequency (SRF) cavities operating in accelerators and it occurs whenever contaminants, like dust, metal flakes or even absorbates, are present on the surface of the cavity high electric field region. Field emission reduces the maximum achievable accelerating field and generates free electrons that may interact with t…
▽ More
Field emission (FE) is one of the main limiting factors of superconducting radio-frequency (SRF) cavities operating in accelerators and it occurs whenever contaminants, like dust, metal flakes or even absorbates, are present on the surface of the cavity high electric field region. Field emission reduces the maximum achievable accelerating field and generates free electrons that may interact with the beam, damage or activate the beamline. One practical method that can be used to mitigate this problem is in-situ plasma cleaning, or plasma processing. The development of a processing that can be applied in-situ is extremely advantageous, since it enables the recovery of the cryomodule performance without the need of disassembling the whole cryomodule, which is an extremely expensive and time-consuming process. On the other hand, plasma processing only requires the cryomodule warm-up to room-temperature and the subsequent processing of the contaminated cavities. The entire process is reasonably quick and involves a limited number of personnel. For these reasons we would like to advocate for continuing to invest in the R\&D of plasma processing to optimize its applicability in cryomodules and for extending the technique to other frequency ranges and cavities geometries.
△ Less
Submitted 23 March, 2022;
originally announced March 2022.
-
An Impartial Perspective for Superconducting Nb3Sn coated Copper RF Cavities for Future Accelerators
Authors:
E. Barzi,
B. C. Barish,
R. A. Rimmer,
A. Valente-Feliciano,
C. M. Rey,
W. A. Barletta,
E. Nanni,
M. Nasr,
M. Ross,
M. Schneider,
S. Tantawi,
P. B. Welander,
E. I. Simakov,
I. O. Usov,
L. Alff,
N. Karabas,
M. Major,
J. P. Palakkal,
S. Petzold,
N. Pietralla,
N. Schäfer,
A. Kikuchi,
H. Hayano,
H. Ito,
S. Kashiwaji
, et al. (10 additional authors not shown)
Abstract:
This Snowmass21 Contributed Paper encourages the Particle Physics community in fostering R&D in Superconducting Nb3Sn coated Copper RF Cavities instead of costly bulk Niobium. It describes the pressing need to devote effort in this direction, which would deliver higher gradient and higher temperature of operation and reduce the overall capital and operational costs of any future collider. It is un…
▽ More
This Snowmass21 Contributed Paper encourages the Particle Physics community in fostering R&D in Superconducting Nb3Sn coated Copper RF Cavities instead of costly bulk Niobium. It describes the pressing need to devote effort in this direction, which would deliver higher gradient and higher temperature of operation and reduce the overall capital and operational costs of any future collider. It is unlikely that an ILC will be built in the next ten years with Nb as one of the main cost drivers of SRFs. This paper provides strong arguments on the benefits of using this time for R&D on producing Nb3Sn on inexpensive and thermally efficient metals such as Cu or bronze, while pursuing in parallel the novel U.S. concept of parallel-feed RF accelerator structures. A technology that synergistically uses both of these advanced tools would make an ILC or equivalent machines more affordable and more likely to be built. Such a successful enterprise would readily apply to other HEP accelerators, for instance a Muon Collider, and to accelerators beyond HEP. We present and assess current efforts in the U.S. on the novel concept of parallel-feed RF accelerator structures, and in the U.S. and abroad in producing Nb3Sn films on either Cu or bronze despite minimal funding.
△ Less
Submitted 26 March, 2022; v1 submitted 17 March, 2022;
originally announced March 2022.
-
Higgs Factory Considerations
Authors:
J. A. Bagger,
B. C. Barish,
S. Belomestnykh,
P. C. Bhat,
J. E. Brau,
M. Demarteau,
D. Denisov,
S. C. Eno,
C. G. R. Geddes,
P. D. Grannis,
A. Hutton,
A. J. Lankford,
M. U. Liepe,
D. B. MacFarlane,
T. Markiewicz,
H. E. Montgomery,
J. R. Patterson,
M. Perelstein,
M. E. Peskin,
M. C. Ross,
J. Strube,
A. P. White,
G. W. Wilson
Abstract:
We discuss considerations that can be used to formulate recommendations for initiating a lepton collider project that would provide precision studies of the Higgs boson and related electroweak phenomena.
We discuss considerations that can be used to formulate recommendations for initiating a lepton collider project that would provide precision studies of the Higgs boson and related electroweak phenomena.
△ Less
Submitted 17 March, 2022; v1 submitted 11 March, 2022;
originally announced March 2022.
-
Mechanical performance comparison of two surgical constructs for wrist four-corner arthrodesis via dorsal and radial approaches
Authors:
Barthélémy Faudot,
Julien Ballerini,
Mark Ross,
Philippe Bellemère,
Benjamin Goislard de Monsabert,
Laurent Vigouroux,
Jean-Louis Milan
Abstract:
Background: Four-corner arthrodesis, which involves fusing four carpal bones while removing the scaphoid bone, is a standard surgery for the treatment of advanced stages of wrist arthritis. Nowadays, it can be performed using a dorsal approach by fixing a plate to the bones and a new radial approach is in development. To date, there is no consensus on the biomechanically optimal and most reliable…
▽ More
Background: Four-corner arthrodesis, which involves fusing four carpal bones while removing the scaphoid bone, is a standard surgery for the treatment of advanced stages of wrist arthritis. Nowadays, it can be performed using a dorsal approach by fixing a plate to the bones and a new radial approach is in development. To date, there is no consensus on the biomechanically optimal and most reliable surgical construct for four-corner arthrodesis. Methods: To evaluate them biomechanically and thus assist the surgeon in choosing the best implant orientation, radial or dorsal, the two different four-corner arthrodesis surgical constructs were virtually simulated on a 3D finite element model representing all major structures of the wrist. Two different realistic load sets were applied to the model, representing common tasks for the elderly. Findings: Results consistency was assessed by comparing with the literature the force magnitude computed on the carpal bones. The Von Mises stress distribution in the radial and dorsal plates were calculated. Stress concentration was located at the plate-screw interface for both surgical constructs, with a maximum stress value of 413 MPa for the dorsal plate compared to 326 MPa for the radial plate, meaning that the stress levels are more unfavourable in the dorsal approach. Interpretation: Although some bending stress was found in one load case, the radial plate was mechanically more robust in the other load case. Despite some limitations, this study provides, for the first time, quantified evidence that the newly developed radial surgical construct is mechanically as efficient as the dorsal surgical construct.
△ Less
Submitted 27 January, 2022;
originally announced January 2022.
-
Plasma Cleaning of LCLS-II-HE verification cryomodule cavities
Authors:
Bianca Giaccone,
Paolo Berrutti,
Martina Martinello,
Sam Posen,
Andrew Cravatta,
Alexandr Netepenko,
Tug Arkan,
Anna Grassellino,
Brian Hartsell,
Joshua Kaluzny,
Andrew Penhollow,
Dan Gonnella,
Marc Ross,
James Maniscalco,
Joel Fuerst,
Greg Hays,
Marc Doleans
Abstract:
Plasma cleaning is a technique that can be applied in superconducting radio-frequency (SRF) cavities in situ in cryomodules in order to decrease their level of field emission. We developed the technique for the Linac Coherent Light Source II (LCLS-II) cavities and we present in this paper the full development and application of plasma processing to the LCLS-II High Energy (HE) verification cryomod…
▽ More
Plasma cleaning is a technique that can be applied in superconducting radio-frequency (SRF) cavities in situ in cryomodules in order to decrease their level of field emission. We developed the technique for the Linac Coherent Light Source II (LCLS-II) cavities and we present in this paper the full development and application of plasma processing to the LCLS-II High Energy (HE) verification cryomodule (vCM). We validated our plasma processing procedure on the vCM, fully processing four out of eight cavities of this CM, demonstrating that cavities performance were preserved in terms of both accelerating field and quality factor. Applying plasma processing to this clean, record breaking cryomodule also showed that no contaminants were introduced in the string, maintaining the vCM field emission-free up to the maximum field reached by each cavity. We also found that plasma processing eliminates multipacting (MP) induced quenches that are typically observed frequently within the MP band field range. This suggests that plasma processing could be employed in situ in CMs to mitigate both field emission and multipacting, significantly decreasing the testing time of cryomodules, the linac commissioning time and cost and increasing the accelerator reliability.
△ Less
Submitted 1 June, 2022; v1 submitted 24 January, 2022;
originally announced January 2022.
-
LCLS-II-HE verification cryomodule high gradient performance and quench behavior
Authors:
S. Posen,
A. Cravatta,
M. Checchin,
S. Aderhold,
C. Adolphsen,
T. Arkan,
D. Bafia,
A. Benwell,
D. Bice,
B. Chase,
C. Contreras-Martinez,
L. Dootlittle,
J. Fuerst,
D. Gonnella,
A. Grassellino,
C. Grimm,
B. Hansen,
E. Harms,
B. Hartsell,
G. Hays,
J. Holzbauer,
S. Hoobler,
J. Kaluzny,
T. Khabiboulline,
M. Kucera
, et al. (21 additional authors not shown)
Abstract:
An 8-cavity, 1.3 GHz, LCLS-II-HE cryomodule was assembled and tested at Fermilab to verify performance before the start of production. Its cavities were processed with a novel nitrogen do** treatment to improve gradient performance. The cryomodule was tested with a modified protocol to process sporadic quenches, which were observed in LCLS-II production cryomodules and are attributed to multipac…
▽ More
An 8-cavity, 1.3 GHz, LCLS-II-HE cryomodule was assembled and tested at Fermilab to verify performance before the start of production. Its cavities were processed with a novel nitrogen do** treatment to improve gradient performance. The cryomodule was tested with a modified protocol to process sporadic quenches, which were observed in LCLS-II production cryomodules and are attributed to multipacting. Dedicated vertical test experiments support the attribution to multipacting. The verification cryomodule achieved an acceleration voltage of 200 MV in continuous wave mode, corresponding to an average accelerating gradient of 24.1 MV/m, significantly exceeding the specification of 173 MV. The average Q0 (3.0x10^10) also exceeded its specification (2.7x10^10). After processing, no field emission was observed up to the maximum gradient of each cavity. This paper reviews the cryomodule performance and discusses operational issues and mitigations implemented during the several month program.
△ Less
Submitted 27 October, 2021;
originally announced October 2021.
-
Point Absorber Limits to Future Gravitational-Wave Detectors
Authors:
W. Jia,
H. Yamamoto,
K. Kuns,
A. Effler,
M. Evans,
P. Fritschel,
R. Abbott,
C. Adams,
R. X. Adhikari,
A. Ananyeva,
S. Appert,
K. Arai,
J. S. Areeda,
Y. Asali,
S. M. Aston,
C. Austin,
A. M. Baer,
M. Ball,
S. W. Ballmer,
S. Banagiri,
D. Barker,
L. Barsotti,
J. Bartlett,
B. K. Berger,
J. Betzwieser
, et al. (176 additional authors not shown)
Abstract:
High-quality optical resonant cavities require low optical loss, typically on the scale of parts per million. However, unintended micron-scale contaminants on the resonator mirrors that absorb the light circulating in the cavity can deform the surface thermoelastically, and thus increase losses by scattering light out of the resonant mode. The point absorber effect is a limiting factor in some hig…
▽ More
High-quality optical resonant cavities require low optical loss, typically on the scale of parts per million. However, unintended micron-scale contaminants on the resonator mirrors that absorb the light circulating in the cavity can deform the surface thermoelastically, and thus increase losses by scattering light out of the resonant mode. The point absorber effect is a limiting factor in some high-power cavity experiments, for example, the Advanced LIGO gravitational wave detector. In this Letter, we present a general approach to the point absorber effect from first principles and simulate its contribution to the increased scattering. The achievable circulating power in current and future gravitational-wave detectors is calculated statistically given different point absorber configurations. Our formulation is further confirmed experimentally in comparison with the scattered power in the arm cavity of Advanced LIGO measured by in-situ photodiodes. The understanding presented here provides an important tool in the global effort to design future gravitational wave detectors that support high optical power, and thus reduce quantum noise.
△ Less
Submitted 17 September, 2021;
originally announced September 2021.
-
Laminar flow characterization using low-field magnetic resonance techniques
Authors:
Jiangfeng Guo,
Michael M. B. Ross,
Benedict Newling,
Maggie Lawrence,
Bruce J. Balcom
Abstract:
Laminar flow velocity profiles depend heavily on fluid rheology. Develo** methods of laminar flow characterization, based on low-field magnetic resonance (MR), contributes to the widespread industrial application of the MR technique in rheology. In this paper, we designed a low-cost, palm-sized permanent magnet with a 1H resonance frequency of 20.48 MHz to measure laminar flow. The magnet consis…
▽ More
Laminar flow velocity profiles depend heavily on fluid rheology. Develo** methods of laminar flow characterization, based on low-field magnetic resonance (MR), contributes to the widespread industrial application of the MR technique in rheology. In this paper, we designed a low-cost, palm-sized permanent magnet with a 1H resonance frequency of 20.48 MHz to measure laminar flow. The magnet consists of two disk magnets, which were each tilted at an angle of 1° from a starting separation of 1.4 cm to generate a constant gradient, 65 gauss/cm, in the direction of flow. Subsequently, a series of process methods, for MR measurements, were proposed to characterize Newtonian and non-Newtonian fluid flows in a pipe, including phase-based method, magnitude-based method, and velocity spectrum method. The accuracies of the proposed methods were validated by simulations, and experiments of Poiseuille flow and shear-thinning flow on the designed magnet. The new velocity profile methods proposed are advantageous because the MR instrumentation and measurement methods are simple and portable. The sophistication is found in the analysis although the physical principles are straight forward.
△ Less
Submitted 28 September, 2021; v1 submitted 28 June, 2021;
originally announced June 2021.
-
LIGOs Quantum Response to Squeezed States
Authors:
L. McCuller,
S. E. Dwyer,
A. C. Green,
Haocun Yu,
L. Barsotti,
C. D. Blair,
D. D. Brown,
A. Effler,
M. Evans,
A. Fernandez-Galiana,
P. Fritschel,
V. V. Frolov,
N. Kijbunchoo,
G. L. Mansell,
F. Matichard,
N. Mavalvala,
D. E. McClelland,
T. McRae,
A. Mullavey,
D. Sigg,
B. J. J. Slagmolen,
M. Tse,
T. Vo,
R. L. Ward,
C. Whittle
, et al. (172 additional authors not shown)
Abstract:
Gravitational Wave interferometers achieve their profound sensitivity by combining a Michelson interferometer with optical cavities, suspended masses, and now, squeezed quantum states of light. These states modify the measurement process of the LIGO, VIRGO and GEO600 interferometers to reduce the quantum noise that masks astrophysical signals; thus, improvements to squeezing are essential to furth…
▽ More
Gravitational Wave interferometers achieve their profound sensitivity by combining a Michelson interferometer with optical cavities, suspended masses, and now, squeezed quantum states of light. These states modify the measurement process of the LIGO, VIRGO and GEO600 interferometers to reduce the quantum noise that masks astrophysical signals; thus, improvements to squeezing are essential to further expand our gravitational view of the universe. Further reducing quantum noise will require both lowering decoherence from losses as well more sophisticated manipulations to counter the quantum back-action from radiation pressure. Both tasks require fully understanding the physical interactions between squeezed light and the many components of km-scale interferometers. To this end, data from both LIGO observatories in observing run three are expressed using frequency-dependent metrics to analyze each detector's quantum response to squeezed states. The response metrics are derived and used to concisely describe physical mechanisms behind squeezing's simultaneous interaction with transverse-mode selective optical cavities and the quantum radiation pressure noise of suspended mirrors. These metrics and related analysis are broadly applicable for cavity-enhanced optomechanics experiments that incorporate external squeezing, and -- for the first time -- give physical descriptions of every feature so far observed in the quantum noise of the LIGO detectors.
△ Less
Submitted 25 May, 2021;
originally announced May 2021.
-
Point absorbers in Advanced LIGO
Authors:
Aidan F. Brooks,
Gabriele Vajente,
Hiro Yamamoto,
Rich Abbott,
Carl Adams,
Rana X. Adhikari,
Alena Ananyeva,
Stephen Appert,
Koji Arai,
Joseph S. Areeda,
Yasmeen Asali,
Stuart M. Aston,
Corey Austin,
Anne M. Baer,
Matthew Ball,
Stefan W. Ballmer,
Sharan Banagiri,
David Barker,
Lisa Barsotti,
Jeffrey Bartlett,
Beverly K. Berger,
Joseph Betzwieser,
Dripta Bhattacharjee,
Garilynn Billingsley,
Sebastien Biscans
, et al. (176 additional authors not shown)
Abstract:
Small, highly absorbing points are randomly present on the surfaces of the main interferometer optics in Advanced LIGO. The resulting nano-meter scale thermo-elastic deformations and substrate lenses from these micron-scale absorbers significantly reduces the sensitivity of the interferometer directly though a reduction in the power-recycling gain and indirect interactions with the feedback contro…
▽ More
Small, highly absorbing points are randomly present on the surfaces of the main interferometer optics in Advanced LIGO. The resulting nano-meter scale thermo-elastic deformations and substrate lenses from these micron-scale absorbers significantly reduces the sensitivity of the interferometer directly though a reduction in the power-recycling gain and indirect interactions with the feedback control system. We review the expected surface deformation from point absorbers and provide a pedagogical description of the impact on power build-up in second generation gravitational wave detectors (dual-recycled Fabry-Perot Michelson interferometers). This analysis predicts that the power-dependent reduction in interferometer performance will significantly degrade maximum stored power by up to 50% and hence, limit GW sensitivity, but suggests system wide corrections that can be implemented in current and future GW detectors. This is particularly pressing given that future GW detectors call for an order of magnitude more stored power than currently used in Advanced LIGO in Observing Run 3. We briefly review strategies to mitigate the effects of point absorbers in current and future GW wave detectors to maximize the success of these enterprises.
△ Less
Submitted 25 March, 2021; v1 submitted 14 January, 2021;
originally announced January 2021.
-
The Impact of Bacteria Exposure on the Plasmonic Response of Silver Nanostructured Surfaces
Authors:
Giuseppe M. Paternò,
Aaron M. Ross,
Silvia M. Pietralunga,
Simone Normani,
Nicholas Dalla Vedova,
Jakkarin Limwongyut,
Gaia Bondelli,
Liliana Moscardi,
Guillermo C. Bazan,
Francesco Scotognella,
Guglielmo Lanzani
Abstract:
Silver, especially in the form of nanostructures, is widely employed as an antimicrobial agent in a large range of commercial products. The origin of the biocidal mechanism has been elucidated in the last decades, and most likely originates from silver cation release due to oxidative dissolution followed by cellular uptake of silver ions, a process that causes a severe disruption of bacterial meta…
▽ More
Silver, especially in the form of nanostructures, is widely employed as an antimicrobial agent in a large range of commercial products. The origin of the biocidal mechanism has been elucidated in the last decades, and most likely originates from silver cation release due to oxidative dissolution followed by cellular uptake of silver ions, a process that causes a severe disruption of bacterial metabolism and eventually leads to eradication. Despite the large number of works dealing with the effects of nanosilver shape/size on the antibacterial mechanism and on the (bio)physical chemistry pathways that drive bacterial eradication, little effort has been devoted to the investigation of the silver NPs plasmon response upon interaction with bacteria. Here we present a detailed investigation of the bacteria-induced changes of the plasmon spectral and dynamical features after exposure to one of the most studied bacterial models, Escherichia Coli. Ultrafast pump-probe measurements indicate that the dramatic changes on particle size/shape and crystallinity, which stem from a bacteria-induced oxidative dissolution process, translate into a clear modification of the plasmon spectral and dynamical features. This study may open innovative new avenues in the field of biophysics of bio-responsive materials, with the aim of providing new and reliable biophysical signatures of the interaction of these materials with complex biological environments.
△ Less
Submitted 8 January, 2021;
originally announced January 2021.
-
A Low-Frequency Torsion Pendulum with Interferometric Readout
Authors:
M. P. Ross,
K. Venkateswara,
C. A. Hagedorn,
C. J. Leupold,
P. W. F. Forsyth,
J. D. Wegner,
E. A. Shaw,
J. G. Lee,
J. H. Gundlach
Abstract:
We describe a torsion pendulum with a large mass-quadrupole moment and a resonant frequency of 2.8 mHz, whose angle is measured using a modified Michelson interferometer. The system achieved noise levels of $\sim200\ \text{prad}/\sqrt{\text{Hz}}$ between 0.2-30 Hz and $\sim10\ \text{prad}/\sqrt{\text{Hz}}$ above 100 Hz. Such a system can be applied to a broad range of fields from the study of rota…
▽ More
We describe a torsion pendulum with a large mass-quadrupole moment and a resonant frequency of 2.8 mHz, whose angle is measured using a modified Michelson interferometer. The system achieved noise levels of $\sim200\ \text{prad}/\sqrt{\text{Hz}}$ between 0.2-30 Hz and $\sim10\ \text{prad}/\sqrt{\text{Hz}}$ above 100 Hz. Such a system can be applied to a broad range of fields from the study of rotational seismic motion and elastogravity signals to gravitational wave observation and tests of gravity.
△ Less
Submitted 20 April, 2021; v1 submitted 4 January, 2021;
originally announced January 2021.
-
Direct high resolution resonant Raman scattering measurements of InAs quantum dot dynamic nuclear spin polarization states
Authors:
Aaron M. Ross,
Allan S. Bracker,
Michael K. Yakes,
Daniel Gammon,
L. J. Sham,
Duncan G. Steel
Abstract:
We report on the direct measurement of the electron spin splitting and the accompanying nuclear Overhauser (OH) field, and thus the underlying nuclear spin polarization (NSP) and fluctuation bandwidth, in a single InAs quantum dot under resonant excitation conditions with unprecedented spectral resolution. The electron spin splitting is measured directly via resonant spin-flip single photon Raman…
▽ More
We report on the direct measurement of the electron spin splitting and the accompanying nuclear Overhauser (OH) field, and thus the underlying nuclear spin polarization (NSP) and fluctuation bandwidth, in a single InAs quantum dot under resonant excitation conditions with unprecedented spectral resolution. The electron spin splitting is measured directly via resonant spin-flip single photon Raman scattering detected by superconducting nanowires to generate excitation-emission energy maps. The observed two-dimensional maps reveal an OH field that has a non-linear dependence on excitation frequency. This study provides new insight into earlier reports of so-called avoidance and tracking, showing two distinct NSP responses directly by the addition of a emission energy axis. The data show that the polarization processes depend on which electron spin state is optically driven, with surprising differences in the polarization fluctuations for each case: in one case, a stabilized field characterized by a single-peaked distribution shifts monotonically with the laser excitation frequency resulting in a nearly constant optical interaction strength across a wide detuning range, while in the other case the previously reported avoidance behavior is actually the result of a nonlinear dependence on the laser excitation frequency near zero detuning leading to switching between two distinct mesoscopic nuclear spin states. The magnitude of the field, which is as large as 400 mT, is measured with sub-100 nuclear spin sensitivity. Stable/unstable points of the OH field distribution are observed, resulting from the non-linear feedback loop in the electron-trion-nuclear system. Nuclear spin polarization state switching occurs between fields differing by 160 mT at least as fast as 25 ms. Control experiments indicate that the strain-induced quadrupolar interaction may explain the measured OH fields.
△ Less
Submitted 26 November, 2020;
originally announced November 2020.
-
Field emission mitigation studies in LCLS-II cavities via in situ plasma processing
Authors:
Bianca Giaccone,
Martina Martinello,
Paolo Berrutti,
Oleksandr Melnychuk,
Dmitri A. Sergatskov,
Anna Grassellino,
Dan Gonnella,
Marc Ross,
Marc Doleans,
John F. Zasadzinski
Abstract:
Field emission is one of the factors that can limit the performance of superconducting radio frequency cavities. In order to reduce possible field emission in LCLS-II (Linac Coherent Light Source II), we are develo** plasma processing for 1.3 GHz 9-cell cavities. Plasma processing can be applied in situ in the cryomodule to mitigate field emission related to hydrocarbon contamination present on…
▽ More
Field emission is one of the factors that can limit the performance of superconducting radio frequency cavities. In order to reduce possible field emission in LCLS-II (Linac Coherent Light Source II), we are develo** plasma processing for 1.3 GHz 9-cell cavities. Plasma processing can be applied in situ in the cryomodule to mitigate field emission related to hydrocarbon contamination present on the cavity surface. In this paper, plasma cleaning was applied to single cell and 9-cell cavities, both clean and contaminated; the cavities were cold tested before and after plasma processing in order to compare their performance. It was proved that plasma cleaning does not negatively affect the nitrogen do** surface treatment; on the contrary, it preserves the high quality factor and quench field. Plasma processing was also applied to cavities with natural field emission or artificially contaminated. It was found that this technique successfully removes carbon-based contamination from the cavity iris and that it is able to remove field emission in a naturally field emitting cavity. Vacuum failure experiments were simulated on four cavities, and in some cases plasma processing was able to achieve an increase in performance.
△ Less
Submitted 5 October, 2020; v1 submitted 10 September, 2020;
originally announced September 2020.
-
Direct Imaging and Electronic Structure Modulation of Moiré Superlattices at the 2D/3D Interface
Authors:
Kate Reidy,
Georgios Varnavides,
Joachim Dahl Thomsen,
Abinash Kumar,
Thang Pham,
Arthur M. Blackburn,
Polina Anikeeva,
Prineha Narang,
James M. LeBeau,
Frances M. Ross
Abstract:
The atomic structure at the interface between two-dimensional (2D) and three-dimensional (3D) materials influences properties such as contact resistance, photo-response, and high-frequency electrical performance. Moiré engineering is yet to be utilized for tailoring this 2D/3D interface, despite its success in enabling correlated physics at 2D/2D interfaces. Using epitaxially aligned MoS2/Au{111}…
▽ More
The atomic structure at the interface between two-dimensional (2D) and three-dimensional (3D) materials influences properties such as contact resistance, photo-response, and high-frequency electrical performance. Moiré engineering is yet to be utilized for tailoring this 2D/3D interface, despite its success in enabling correlated physics at 2D/2D interfaces. Using epitaxially aligned MoS2/Au{111} as a model system, we demonstrate the use of advanced scanning transmission electron microscopy (STEM) combined with a geometric convolution technique in imaging the crystallographic 32 A moiré pattern at the 2D/3D interface. This moiré period is often hidden in conventional electron microscopy, where the Au structure is seen in projection. We show, via ab initio electronic structure calculations, that charge density is modulated according to the moiré period, illustrating the potential for (opto-)electronic moiré engineering at the 2D/3D interface. Our work presents a general pathway to directly image periodic modulation at interfaces using this combination of emerging microscopy techniques.
△ Less
Submitted 7 July, 2022; v1 submitted 27 August, 2020;
originally announced August 2020.
-
Improving the Robustness of the Advanced LIGO Detectors to Earthquakes
Authors:
Eyal Schwartz,
A Pele,
J Warner,
B Lantz,
J Betzwieser,
K L Dooley,
S Biscans,
M Coughlin,
N Mukund,
R Abbott,
C Adams,
R X Adhikari,
A Ananyeva,
S Appert,
K Arai,
J S Areeda,
Y Asali,
S M Aston,
C Austin,
A M Baer,
M Ball,
S W Ballmer,
S Banagiri,
D Barker,
L Barsotti
, et al. (174 additional authors not shown)
Abstract:
Teleseismic, or distant, earthquakes regularly disrupt the operation of ground--based gravitational wave detectors such as Advanced LIGO. Here, we present \emph{EQ mode}, a new global control scheme, consisting of an automated sequence of optimized control filters that reduces and coordinates the motion of the seismic isolation platforms during earthquakes. This, in turn, suppresses the differenti…
▽ More
Teleseismic, or distant, earthquakes regularly disrupt the operation of ground--based gravitational wave detectors such as Advanced LIGO. Here, we present \emph{EQ mode}, a new global control scheme, consisting of an automated sequence of optimized control filters that reduces and coordinates the motion of the seismic isolation platforms during earthquakes. This, in turn, suppresses the differential motion of the interferometer arms with respect to one another, resulting in a reduction of DARM signal at frequencies below 100\,mHz. Our method greatly improved the interferometers' capability to remain operational during earthquakes, with ground velocities up to 3.9\,$μ\mbox{m/s}$ rms in the beam direction, setting a new record for both detectors. This sets a milestone in seismic controls of the Advanced LIGO detectors' ability to manage high ground motion induced by earthquakes, opening a path for further robust operation in other extreme environmental conditions.
△ Less
Submitted 24 July, 2020;
originally announced July 2020.
-
Towards windproofing LIGO: Reducing the effect of wind-driven floor tilt by using rotation sensors in active seismic isolation
Authors:
Michael P. Ross,
Krishna Venkateswara,
Conor Mow-Lowry,
Sam Cooper,
Jim Warner,
Brian Lantz,
Jeffrey Kissel,
Hugh Radkins,
Thomas Shaffer,
Richard Mittleman,
Arnaud Pele,
Jens Gundlach
Abstract:
Modern gravitational-wave observatories require robust low-frequency active seismic isolation in order to keep the interferometer at its ideal operating conditions. Seismometers are used to measure both the motion of the ground and isolated platform. These devices are susceptible to contamination from ground tilt at frequencies below 0.1 Hz, particularly arising from wind-pressure acting on buildi…
▽ More
Modern gravitational-wave observatories require robust low-frequency active seismic isolation in order to keep the interferometer at its ideal operating conditions. Seismometers are used to measure both the motion of the ground and isolated platform. These devices are susceptible to contamination from ground tilt at frequencies below 0.1 Hz, particularly arising from wind-pressure acting on building walls. Consequently, during LIGO's first observing run both observatories suffered significant downtime when wind-speeds were above 7 m/s. We describe the use of ground rotation sensors at the LIGO Hanford Observatory to correct nearby ground seismometers to produce tilt-free ground translation signals. The use of these signals for sensor correction control improved low-frequency seismic isolation and allowed the observatory to operate under wind speeds as high as $15-20$ m/s.
△ Less
Submitted 4 June, 2020; v1 submitted 13 March, 2020;
originally announced March 2020.
-
Bruggeman Approach for Isotropic Chiral Mixtures Revisited
Authors:
Benjamin M. Ross,
Akhlesh Lakhtakia
Abstract:
Two interpretations of the Bruggeman approach for the homogenization of isotropic chiral mixtures are shown to lead to different results. Whereas the standard interpretation is shown to yield the average-polarizability-density approach, a recent interpretation turns out to deliver a null-excess-polarization approach. The difference between the two interpretations arises from differing treatments o…
▽ More
Two interpretations of the Bruggeman approach for the homogenization of isotropic chiral mixtures are shown to lead to different results. Whereas the standard interpretation is shown to yield the average-polarizability-density approach, a recent interpretation turns out to deliver a null-excess-polarization approach. The difference between the two interpretations arises from differing treatments of the local field
△ Less
Submitted 3 June, 2019;
originally announced June 2019.
-
Low RF power plasma ignition and detection for in-situ cleaning of 1.3 GHz 9-cell cavities
Authors:
P. Berrutti,
B. Giaccone,
M. Martinello,
A. Grassellino,
T. Khabiboulline,
M. Doleans,
S. Kim,
D. Gonnella,
G. Lanza,
M. Ross
Abstract:
Superconducting Radio Frequency (SRF) cavities performance preservation is crucial, from vertical test to accelerator operation. Field Emission (FE) is still one of the performance limiting factors to overcome and plasma cleaning has been proven successful by the Spallation Neutron Source (SNS), in cleaning field emitters and increasing the work function of Nb. A collaboration has been established…
▽ More
Superconducting Radio Frequency (SRF) cavities performance preservation is crucial, from vertical test to accelerator operation. Field Emission (FE) is still one of the performance limiting factors to overcome and plasma cleaning has been proven successful by the Spallation Neutron Source (SNS), in cleaning field emitters and increasing the work function of Nb. A collaboration has been established between Fermi National Accelerator Laboratory (FNAL), SLAC National Accelerator Laboratory and Oak Ridge National Laboratory (ORNL) with the purpose of applying plasma processing to the Linac Coherent Light Source-II (LCLS-II) cavities, in order to minimize and overcome field emission without affecting the high Q of nitrogen-doped cavities. The cleaning for LCLS-II will follow the same plasma composition adopted at SNS, which allows in-situ processing of cavities installed in cryomodules from hydrocarbon contaminants. A novel method for plasma ignition has been developed at FNAL: a plasma glow discharge is ignited using high order modes to overcome limitations imposed by the fundamental power coupler, allowing in-situ cleaning for cavities in cryomodule. The plasma can be easily ignited and tuned in each of the cavity cells using low RF power. A method for plasma detection has been developed as well, which allows the detection of the plasma location in the cavity without the need of cameras at both cavity ends. The presented method can be applied to other multi-cell cavity designs, even for accelerators where the coupling for the fundamental modes at room temperature is very weak.
△ Less
Submitted 8 February, 2019;
originally announced February 2019.
-
Teacher-Driven Professional Development and the Pursuit of a Sophisticated Understanding of Inquiry
Authors:
Mike Ross,
Ben Van Dusen,
Samson Sherman,
Valerie Otero
Abstract:
The need for highly qualified physics teachers in the U.S. is well established, and reform efforts are underway to develop novel and innovative teacher professional development experiences to improve the quality of K-12 physics education. Streamline to Mastery is an NSF-funded, learner-centered professional development program that seeks to capitalize on teachers' knowledge and experience to move…
▽ More
The need for highly qualified physics teachers in the U.S. is well established, and reform efforts are underway to develop novel and innovative teacher professional development experiences to improve the quality of K-12 physics education. Streamline to Mastery is an NSF-funded, learner-centered professional development program that seeks to capitalize on teachers' knowledge and experience to move physics teachers toward mastery in their fields. Teacher participants in this teacher-driven program choose their own goals and areas of growth. One of these areas has been the development and implementation of inquiry-oriented curriculum, as well as the adaptation of traditional lessons toward a greater inquiry orientation. Results indicate that teachers' conceptions of inquiry teaching and learning have become more expert-like as they have engaged in teacher participant-driven experiences in the pursuit of greater understanding and more effective classroom practice.
△ Less
Submitted 5 December, 2018;
originally announced December 2018.
-
Dynamics of nanoscale bubbles growing in a tapered conduit
Authors:
Michael M. Norton,
Nicholas M. Schneider,
Frances M. Ross,
Haim H. Bau
Abstract:
We predict the dynamics and shapes of nanobubbles growing in a supersaturated solution confined within a tapered, Hele-Shaw device with a small opening angle $Φ\ll 1$. Our study is inspired by experimental observations of the growth and translation of nanoscale bubbles, ranging in diameter from tens to hundreds of nanometers, carried out with liquid-cell transmission electron microscopy. In our ex…
▽ More
We predict the dynamics and shapes of nanobubbles growing in a supersaturated solution confined within a tapered, Hele-Shaw device with a small opening angle $Φ\ll 1$. Our study is inspired by experimental observations of the growth and translation of nanoscale bubbles, ranging in diameter from tens to hundreds of nanometers, carried out with liquid-cell transmission electron microscopy. In our experiments, the electron beam plays a dual role: it supersaturates the solution with gaseous radiolysis products, which lead to bubble nucleation and growth, and it provides a means to image the bubbles in-situ with nanoscale resolution. To understand our experimental data, we propose a migration mechanism, based on Blake-Haynes theory, which is applicable in the asymptotic limits of zero capillary and Bond numbers and high confinement. Consistent with experimental data, our model predicts that in the presence of confinement, growth rates are orders of magnitude slower compared to a bubble growing in the bulk and that the combination of a tapered channel and contact line pinning create tear-drop shaped bubbles.
△ Less
Submitted 9 December, 2017;
originally announced December 2017.
-
Low Frequency Tilt Seismology with a Precision Ground Rotation Sensor
Authors:
M. P. Ross,
K. Venkateswara,
C. A. Hagedorn,
J. H. Gundlach,
J. S. Kissel,
J. Warner,
H. Radkins,
T. J. Shaffer,
M. W. Coughlin,
P. Bodin
Abstract:
We describe measurements of the rotational component of teleseismic surface waves using an inertial high-precision ground-rotation-sensor installed at the LIGO Hanford Observatory (LHO). The sensor has a noise floor of 0.4 nrad$/ \sqrt{\rm Hz}$ at 50 mHz and a translational coupling of less than 1 $μ$rad/m enabling translation-free measurement of small rotations. We present observations of the rot…
▽ More
We describe measurements of the rotational component of teleseismic surface waves using an inertial high-precision ground-rotation-sensor installed at the LIGO Hanford Observatory (LHO). The sensor has a noise floor of 0.4 nrad$/ \sqrt{\rm Hz}$ at 50 mHz and a translational coupling of less than 1 $μ$rad/m enabling translation-free measurement of small rotations. We present observations of the rotational motion from Rayleigh waves of six teleseismic events from varied locations and with magnitudes ranging from M6.7 to M7.9. These events were used to estimate phase dispersion curves which shows agreement with a similar analysis done with an array of three STS-2 seismometers also located at LHO.
△ Less
Submitted 25 July, 2017; v1 submitted 10 July, 2017;
originally announced July 2017.
-
Laser Wire Scanner Compton Scattering Techniques for the Measurement of the Transverse Beam Size of Particle Beams at Future Linear Colliders
Authors:
I. Agapov,
K. Baleski,
G. A. Blair,
J. Bosser,
H. H. Braun,
E. Bravin,
G. Boorman,
S. T. Boogert,
J. Carter,
E. D'amico,
N. Delerue,
D. F. Howell,
S. Doebert,
C. Driouichi,
J. Frisch,
K. Honkavaaram S. Hutchins,
T. Kamps,
T. Lefevre,
H. Lewin,
T. Paris,
F. Poirier,
M. T. Price,
R. Maccaferi,
S. Malton,
G. Penn
, et al. (9 additional authors not shown)
Abstract:
This archive summarizes a working paper and conference proceedings related to laser wire scanner development for the Future Linear Collider (FLC) in the years 2001 to 2006. In particular the design, setup and data taking for the laser wire experiments at PETRA II and CT2 are described. The material is focused on the activities undertaken by Royal Holloway University of London (RHUL).
This archive summarizes a working paper and conference proceedings related to laser wire scanner development for the Future Linear Collider (FLC) in the years 2001 to 2006. In particular the design, setup and data taking for the laser wire experiments at PETRA II and CT2 are described. The material is focused on the activities undertaken by Royal Holloway University of London (RHUL).
△ Less
Submitted 9 December, 2014;
originally announced December 2014.
-
Becoming Agents of Change through Participation in a Teacher-Driven Professional Research Community
Authors:
Mike Ross,
Ben Van Dusen,
Valerie Otero
Abstract:
This study involves a theory-based teacher professional development model that was created to address two problems. First, dominant modes of science teacher professional development have been inadequate in hel** teachers create learning environments that engage students in the practices of science, as called for most recently by the NGSS. Second, there is a lack of teacher presence and voice in…
▽ More
This study involves a theory-based teacher professional development model that was created to address two problems. First, dominant modes of science teacher professional development have been inadequate in hel** teachers create learning environments that engage students in the practices of science, as called for most recently by the NGSS. Second, there is a lack of teacher presence and voice in the national dialogue on education reform and assessment. In this study, teachers led and participated in a professional community focusing on STEM education research. In this community, teachers became increasingly responsible for designing and enacting learning experiences for themselves and their colleagues. We investigated the characteristics of the science teachers learning process. Findings suggest that teachers who participated in this model generated knowledge and practices about teaching and learning while simultaneously develo** identities and practices as education reform advocates and agents of educational change.
△ Less
Submitted 11 August, 2014;
originally announced August 2014.
-
Benefits to the U.S. from Physicists Working at Accelerators Overseas
Authors:
Jacob Anderson,
Raymond Brock,
Yuri Gershtein,
Nicholas Hadley,
Michael Harrison,
Meenakshi Narain,
Jason Nielsen,
Fred Olness,
Bjoern Penning,
Michael Peskin,
Eric Prebys,
Marc Ross,
Salvatore Rappoccio,
Abraham Seiden,
Ryszard Stroynowski
Abstract:
We illustrate benefits to the U.S. economy and technological infrastructure of U.S. participation in accelerators overseas. We discuss contributions to experimental hardware and analysis and to accelerator technology and components, and benefits stemming from the involvement of U.S. students and postdoctoral fellows in global scientific collaborations. Contributed to the proceedings of the Snowmas…
▽ More
We illustrate benefits to the U.S. economy and technological infrastructure of U.S. participation in accelerators overseas. We discuss contributions to experimental hardware and analysis and to accelerator technology and components, and benefits stemming from the involvement of U.S. students and postdoctoral fellows in global scientific collaborations. Contributed to the proceedings of the Snowmass 2013 Community Summer Study.
△ Less
Submitted 17 December, 2013;
originally announced December 2013.
-
Luminosity Upgrades for ILC
Authors:
Mike Harrison,
Marc Ross,
Nicholas Walker
Abstract:
The possibility of increasing the luminosity for the ILC at Ecm < 350 GeV centre-of-mass by increasing the beam power are considered. It will be shown that an approximately constant luminosity can be achieved across the centre of mass energy range (250-500 GeV) without exceeding the installed AC power for 500 GeV operation. Overall a factor of four in luminosity over the published baseline could b…
▽ More
The possibility of increasing the luminosity for the ILC at Ecm < 350 GeV centre-of-mass by increasing the beam power are considered. It will be shown that an approximately constant luminosity can be achieved across the centre of mass energy range (250-500 GeV) without exceeding the installed AC power for 500 GeV operation. Overall a factor of four in luminosity over the published baseline could be achieved at 250 GeV resulting in 3*10**34 cm-2s-1. The implications for the dam** rings and positron source are also briefly discussed.
△ Less
Submitted 16 August, 2013;
originally announced August 2013.
-
Wall-plug (AC) power consumption of a very high energy e+/e- storage ring collider
Authors:
Marc C. Ross
Abstract:
Estimated AC power consumption ranges from ~280 MW (1) to 416 MW (2) for a 350 GeV E_cm 80 km circumference colliding beam storage ring complex with parameters given in (1). The difference between the two estimates is from differing assumptions concerning heat removal, cryo-plant efficiency, klystron operation etc. The purpose of this note is to list and explain these.
(1) Mike Koratzinos, et al…
▽ More
Estimated AC power consumption ranges from ~280 MW (1) to 416 MW (2) for a 350 GeV E_cm 80 km circumference colliding beam storage ring complex with parameters given in (1). The difference between the two estimates is from differing assumptions concerning heat removal, cryo-plant efficiency, klystron operation etc. The purpose of this note is to list and explain these.
(1) Mike Koratzinos, et al, IPAC13 (2) Marc Ross, Higgs Quo Vadis Workshop, March 2013.
△ Less
Submitted 3 August, 2013;
originally announced August 2013.
-
The International Linear Collider Technical Design Report - Volume 3.I: Accelerator R&D in the Technical Design Phase
Authors:
Chris Adolphsen,
Maura Barone,
Barry Barish,
Karsten Buesser,
Philip Burrows,
John Carwardine,
Jeffrey Clark,
Hélène Mainaud Durand,
Gerry Dugan,
Eckhard Elsen,
Atsushi Enomoto,
Brian Foster,
Shigeki Fukuda,
Wei Gai,
Martin Gastal,
Rongli Geng,
Camille Ginsburg,
Susanna Guiducci,
Mike Harrison,
Hitoshi Hayano,
Keith Kershaw,
Kiyoshi Kubo,
Victor Kuchler,
Benno List,
Wanming Liu
, et al. (19 additional authors not shown)
Abstract:
The International Linear Collider Technical Design Report (TDR) describes in four volumes the physics case and the design of a 500 GeV centre-of-mass energy linear electron-positron collider based on superconducting radio-frequency technology using Niobium cavities as the accelerating structures. The accelerator can be extended to 1 TeV and also run as a Higgs factory at around 250 GeV and on the…
▽ More
The International Linear Collider Technical Design Report (TDR) describes in four volumes the physics case and the design of a 500 GeV centre-of-mass energy linear electron-positron collider based on superconducting radio-frequency technology using Niobium cavities as the accelerating structures. The accelerator can be extended to 1 TeV and also run as a Higgs factory at around 250 GeV and on the Z0 pole. A comprehensive value estimate of the accelerator is give, together with associated uncertainties. It is shown that no significant technical issues remain to be solved. Once a site is selected and the necessary site-dependent engineering is carried out, construction can begin immediately. The TDR also gives baseline documentation for two high-performance detectors that can share the ILC luminosity by being moved into and out of the beam line in a "push-pull" configuration. These detectors, ILD and SiD, are described in detail. They form the basis for a world-class experimental programme that promises to increase significantly our understanding of the fundamental processes that govern the evolution of the Universe.
△ Less
Submitted 26 June, 2013;
originally announced June 2013.
-
The International Linear Collider Technical Design Report - Volume 3.II: Accelerator Baseline Design
Authors:
Chris Adolphsen,
Maura Barone,
Barry Barish,
Karsten Buesser,
Philip Burrows,
John Carwardine,
Jeffrey Clark,
Hélène Mainaud Durand,
Gerry Dugan,
Eckhard Elsen,
Atsushi Enomoto,
Brian Foster,
Shigeki Fukuda,
Wei Gai,
Martin Gastal,
Rongli Geng,
Camille Ginsburg,
Susanna Guiducci,
Mike Harrison,
Hitoshi Hayano,
Keith Kershaw,
Kiyoshi Kubo,
Victor Kuchler,
Benno List,
Wanming Liu
, et al. (19 additional authors not shown)
Abstract:
The International Linear Collider Technical Design Report (TDR) describes in four volumes the physics case and the design of a 500 GeV centre-of-mass energy linear electron-positron collider based on superconducting radio-frequency technology using Niobium cavities as the accelerating structures. The accelerator can be extended to 1 TeV and also run as a Higgs factory at around 250 GeV and on the…
▽ More
The International Linear Collider Technical Design Report (TDR) describes in four volumes the physics case and the design of a 500 GeV centre-of-mass energy linear electron-positron collider based on superconducting radio-frequency technology using Niobium cavities as the accelerating structures. The accelerator can be extended to 1 TeV and also run as a Higgs factory at around 250 GeV and on the Z0 pole. A comprehensive value estimate of the accelerator is give, together with associated uncertainties. It is shown that no significant technical issues remain to be solved. Once a site is selected and the necessary site-dependent engineering is carried out, construction can begin immediately. The TDR also gives baseline documentation for two high-performance detectors that can share the ILC luminosity by being moved into and out of the beam line in a "push-pull" configuration. These detectors, ILD and SiD, are described in detail. They form the basis for a world-class experimental programme that promises to increase significantly our understanding of the fundamental processes that govern the evolution of the Universe.
△ Less
Submitted 26 June, 2013;
originally announced June 2013.
-
The International Linear Collider
Authors:
Jim Brau,
Paul Grannis,
Mike Harrison,
Michael Peskin,
Marc Ross,
Harry Weerts
Abstract:
We present a brief summary of the International Linear Collider as documented in the 2013 Technical Design Report. The Technical Design Report has detailed descriptions of the accelerator baseline design for a 500 GeV e+e- linear collider, the R&D program that has demonstrated its feasibility, the physics goals and expected sensitivities, and the description of the ILD and SiD detectors and their…
▽ More
We present a brief summary of the International Linear Collider as documented in the 2013 Technical Design Report. The Technical Design Report has detailed descriptions of the accelerator baseline design for a 500 GeV e+e- linear collider, the R&D program that has demonstrated its feasibility, the physics goals and expected sensitivities, and the description of the ILD and SiD detectors and their capabilities.
△ Less
Submitted 9 April, 2013;
originally announced April 2013.
-
Cavity beam position monitor system for the Accelerator Test Facility 2
Authors:
Y. I. Kim,
R. Ainsworth,
A. Aryshev,
S. T. Boogert,
G. Boorman,
J. Frisch,
A. Heo,
Y. Honda,
W. H. Hwang,
J. Y. Huang,
E. -S. Kim,
S. H. Kim,
A. Lyapin,
T. Naito,
J. May,
D. McCormick,
R. E. Mellor,
S. Molloy,
J. Nelson,
S. J. Park,
Y. J. Park,
M. Ross,
S. Shin,
C. Swinson,
T. Smith
, et al. (4 additional authors not shown)
Abstract:
The Accelerator Test Facility 2 (ATF2) is a scaled demonstrator system for final focus beam lines of linear high energy colliders. This paper describes the high resolution cavity beam position monitor (BPM) system, which is a part of the ATF2 diagnostics. Two types of cavity BPMs are used, C-band operating at 6.423 GHz, and S-band at 2.888 GHz with an increased beam aperture. The cavities, electro…
▽ More
The Accelerator Test Facility 2 (ATF2) is a scaled demonstrator system for final focus beam lines of linear high energy colliders. This paper describes the high resolution cavity beam position monitor (BPM) system, which is a part of the ATF2 diagnostics. Two types of cavity BPMs are used, C-band operating at 6.423 GHz, and S-band at 2.888 GHz with an increased beam aperture. The cavities, electronics, and digital processing are described. The resolution of the C-band system with attenuators was determined to be approximately 250 nm and 1 m for the S-band system. Without attenuation the best recorded C-band cavity resolution was 27 nm.
△ Less
Submitted 23 January, 2013;
originally announced January 2013.
-
Electron Beam Artifacts in Liquid-Cell Electron Microscopy
Authors:
Joseph M. Grogan,
Frances M. Ross,
Haim H. Bau
Abstract:
Bubbles may form when imaging liquids with in situ liquid-cell electron microscopy. Fluid dynamics videos show beam-induced bubble nucleation and growth. By examining the bubble formation and growth process, we hope to gain a better understanding of interactions between the electron beam and liquids.
Bubbles may form when imaging liquids with in situ liquid-cell electron microscopy. Fluid dynamics videos show beam-induced bubble nucleation and growth. By examining the bubble formation and growth process, we hope to gain a better understanding of interactions between the electron beam and liquids.
△ Less
Submitted 11 October, 2012;
originally announced October 2012.
-
Changing Identities and Evolving Conceptions of Inquiry through Teacher-Driven Professional Development
Authors:
Ben Van Dusen,
Mike Ross,
Valerie Otero
Abstract:
This STEM education study investigates the Streamline to Mastery professional development program, in which teachers work in partnership with university researchers to design professional development opportunities for themselves and for fellow teachers. Our research describes the process of teacher professional growth both through changes in agency and through a shared pursuit of an improved under…
▽ More
This STEM education study investigates the Streamline to Mastery professional development program, in which teachers work in partnership with university researchers to design professional development opportunities for themselves and for fellow teachers. Our research describes the process of teacher professional growth both through changes in agency and through a shared pursuit of an improved understanding of classroom scientific inquiry. Videos, emails, lesson reflections, survey responses, and interviews were analyzed to glean insight into changes in teacher discourse around inquiry and into their shifts in participation within the professional community they established. Implications for professional development in STEM education are discussed.
△ Less
Submitted 6 September, 2012;
originally announced September 2012.
-
Present status and first results of the final focus beam line at the KEK Accelerator Test Facility
Authors:
P. Bambade,
M. Alabau Pons,
J. Amann,
D. Angal-Kalinin,
R. Apsimon,
S. Araki,
A. Aryshev,
S. Bai,
P. Bellomo,
D. Bett,
G. Blair,
B. Bolzon,
S. Boogert,
G. Boorman,
P. N. Burrows,
G. Christian,
P. Coe,
B. Constance,
Jean-Pierre Delahaye,
L. Deacon,
E. Elsen,
A. Faus-Golfe,
M. Fukuda,
J. Gao,
N. Geffroy
, et al. (69 additional authors not shown)
Abstract:
ATF2 is a final-focus test beam line which aims to focus the low emittance beam from the ATF dam** ring to a vertical size of about 37 nm and to demonstrate nanometer level beam stability. Several advanced beam diagnostics and feedback tools are used. In December 2008, construction and installation were completed and beam commissioning started, supported by an international team of Asian, Europe…
▽ More
ATF2 is a final-focus test beam line which aims to focus the low emittance beam from the ATF dam** ring to a vertical size of about 37 nm and to demonstrate nanometer level beam stability. Several advanced beam diagnostics and feedback tools are used. In December 2008, construction and installation were completed and beam commissioning started, supported by an international team of Asian, European, and U.S. scientists. The present status and first results are described.
△ Less
Submitted 5 July, 2012;
originally announced July 2012.
-
The T2K Experiment
Authors:
T2K Collaboration,
K. Abe,
N. Abgrall,
H. Aihara,
Y. Ajima,
J. B. Albert,
D. Allan,
P. -A. Amaudruz,
C. Andreopoulos,
B. Andrieu,
M. D. Anerella,
C. Angelsen,
S. Aoki,
O. Araoka,
J. Argyriades,
A. Ariga,
T. Ariga,
S. Assylbekov,
J. P. A. M. de André,
D. Autiero,
A. Badertscher,
O. Ballester,
M. Barbi,
G. J. Barker,
P. Baron
, et al. (499 additional authors not shown)
Abstract:
The T2K experiment is a long-baseline neutrino oscillation experiment. Its main goal is to measure the last unknown lepton sector mixing angle θ_{13} by observing ν_e appearance in a ν_μ beam. It also aims to make a precision measurement of the known oscillation parameters, Δm^{2}_{23} and sin^{2} 2θ_{23}, via ν_μ disappearance studies. Other goals of the experiment include various neutrino cross…
▽ More
The T2K experiment is a long-baseline neutrino oscillation experiment. Its main goal is to measure the last unknown lepton sector mixing angle θ_{13} by observing ν_e appearance in a ν_μ beam. It also aims to make a precision measurement of the known oscillation parameters, Δm^{2}_{23} and sin^{2} 2θ_{23}, via ν_μ disappearance studies. Other goals of the experiment include various neutrino cross section measurements and sterile neutrino searches. The experiment uses an intense proton beam generated by the J-PARC accelerator in Tokai, Japan, and is composed of a neutrino beamline, a near detector complex (ND280), and a far detector (Super-Kamiokande) located 295 km away from J-PARC. This paper provides a comprehensive review of the instrumentation aspect of the T2K experiment and a summary of the vital information for each subsystem.
△ Less
Submitted 8 June, 2011; v1 submitted 6 June, 2011;
originally announced June 2011.
-
Status of the ATF extraction line laser-wire
Authors:
Nicolas Delerue,
Fred Gannaway,
David Howell,
Grahame Blair,
Gary Boorman,
Chafik Driouichi,
Stewart Boogert,
Alexander Aryshev,
Pavel Karataev,
Nobuhiro Terunuma,
Junji Urakawa,
Axel Brachmann,
Joe Frisch,
Marc Ross
Abstract:
A new laser-wire is being installed in the extraction line of the ATF at KEK. This device aims at demonstrating that laser-wires can be used to measure micrometre scale beam size.
A new laser-wire is being installed in the extraction line of the ATF at KEK. This device aims at demonstrating that laser-wires can be used to measure micrometre scale beam size.
△ Less
Submitted 18 January, 2006;
originally announced January 2006.
-
A Test Facility for the International Linear Collider at SLAC End Station A, for Prototypes of Beam Delivery and IR Components
Authors:
M. Woods,
R. Erickson,
J. Frisch,
C. Hast,
R. K. Jobe,
L. Keller,
T. Markiewicz,
T. Maruyama,
D. McCormick,
J. Nelson,
T. Nelson,
N. Phinney,
T. Raubenheimer,
M. Ross,
A. Seryi,
S. Smith,
Z. Szalata,
P. Tenenbaum,
M. Woodley,
D. Angal-Kalinin,
C. Beard,
C. Densham,
J. Greenhalgh,
F. Jackson,
A. Kalinin
, et al. (36 additional authors not shown)
Abstract:
The SLAC Linac can deliver damped bunches with ILC parameters for bunch charge and bunch length to End Station A. A 10Hz beam at 28.5 GeV energy can be delivered there, parasitic with PEP-II operation. We plan to use this facility to test prototype components of the Beam Delivery System and Interaction Region. We discuss our plans for this ILC Test Facility and preparations for carrying out expe…
▽ More
The SLAC Linac can deliver damped bunches with ILC parameters for bunch charge and bunch length to End Station A. A 10Hz beam at 28.5 GeV energy can be delivered there, parasitic with PEP-II operation. We plan to use this facility to test prototype components of the Beam Delivery System and Interaction Region. We discuss our plans for this ILC Test Facility and preparations for carrying out experiments related to collimator wakefields and energy spectrometers. We also plan an interaction region mockup to investigate effects from backgrounds and beam-induced electromagnetic interference.
△ Less
Submitted 24 May, 2005;
originally announced May 2005.
-
Processing Studies of X-Band Accelerator Structures at the NLCTA
Authors:
C. Adolphsen,
W. Baumgartner,
K. Jobe,
F. Le Pimpec,
R. Loewen,
D. McCormick,
M. Ross,
T. Smith,
J. W. Wang,
T. Higo
Abstract:
RF processing studies of 1.8-m X-band (11.4 GHz) traveling wave structures at the Next Linear Collider Test Accelerator (NLCTA) have revealed breakdown-related damage at gradients lower than expected from earlier tests with standing wave and shorter, lower group velocity traveling wave structures. To understand this difference, a series of structures with different group velocities and lengths a…
▽ More
RF processing studies of 1.8-m X-band (11.4 GHz) traveling wave structures at the Next Linear Collider Test Accelerator (NLCTA) have revealed breakdown-related damage at gradients lower than expected from earlier tests with standing wave and shorter, lower group velocity traveling wave structures. To understand this difference, a series of structures with different group velocities and lengths are being processed. In parallel, efforts are being made to improve processing procedures and to reduce structure contaminants and absorbed gases. This paper presents results from these studies.
△ Less
Submitted 22 August, 2001;
originally announced August 2001.
-
Design, fabrication and measurement of the first rounded damped detuned accelerator structure (RDDS1)
Authors:
J. W. Wang,
C. Adolphsen,
G. B. Bowden,
D. L. Burke,
J. Cornuelle,
V. A. Dolgashev,
W. B. Fowkes,
R. K. Jobe,
R. M. Jones,
K. Ko,
N. Kroll,
Z. Li,
R. J. Loewen,
D. McCormick,
R. H. Miller,
C. K. Ng,
C. Pearson,
T. O. Raubenhemer,
R. Reed,
M. Ross,
R. D. Ruth,
T. Smith,
G. Stupakov,
T. Higo,
Y. Funahashi
, et al. (8 additional authors not shown)
Abstract:
As a joint effort in the JLC/NLC research program, we have developed a new type of damped detuned accelerator structure with optimized round-shaped cavities (RDDS). This paper discusses some important R&D aspects of the first structure in this series (RDDS1). The design aspects covered are the cell design with sub-MHz precision, HOM detuning, coupling and dam** technique and wakefield simulati…
▽ More
As a joint effort in the JLC/NLC research program, we have developed a new type of damped detuned accelerator structure with optimized round-shaped cavities (RDDS). This paper discusses some important R&D aspects of the first structure in this series (RDDS1). The design aspects covered are the cell design with sub-MHz precision, HOM detuning, coupling and dam** technique and wakefield simulation. The fabrication issues covered are ultra-precision cell machining with micron accuracy, assembly and diffusion bonding technologies to satisfactorily meet bookshelf, straightness and cell rotational alignment requirements. The measurements described are the RF properties of single cavities and complete accelerator section, as well as wakefields from the ASSET tests at SLAC. Finally, future improvements are also discussed.
△ Less
Submitted 6 September, 2000;
originally announced September 2000.