Showing 1–50 of 51 results for author: Romano, F

Design and First Tests of the Trapped Electrons Experiment T-REX

Authors: Francesco Romano, Guillaume Le Bars, Joaquim Loizu, Marc Nöel, Jean-Philippe Hogge, Stefano Alberti, Jeremy Genoud, Severino Antonioni, Lorraine Naux, Pierrick Giroud-Garampon, Steve Couturier, Thierry Leresche, Damien Fasel

Abstract: Gyrotrons are the only sources used for electron cyclotron resonance heating (ECRH). Past gyrotron experiments have highlighted some instability issues, leading to restricted operating ranges. One major cause is the possible presence of trapped electrons within the gyrotron's magnetron injection gun (MIG) region, resulting in undesired currents and subsequent operational failures. Hereby, we prese… ▽ More Gyrotrons are the only sources used for electron cyclotron resonance heating (ECRH). Past gyrotron experiments have highlighted some instability issues, leading to restricted operating ranges. One major cause is the possible presence of trapped electrons within the gyrotron's magnetron injection gun (MIG) region, resulting in undesired currents and subsequent operational failures. Hereby, we present the design and initial experimental findings of the TRapped Electrons eXperiment (T-REX), a novel and unique basic plasma experiment constructed at the Swiss Plasma Center to investigate the underlying physics of trapped electron clouds, therefore entering the realm of non-neutral plasmas. The primary objective is to explore the formation and evolution of electron clouds in gyrotron MIG designs. Typical MIG conditions are replicated in T-REX in terms of geometries, electric and magnetic fields, and supported by kinetic simulations via the 2D Particle-in-Cell (PIC) code FENNECS. T-REX is characterized by two coaxial electrodes, placed in a vacuum chamber on top of a superconducting magnet, with an applied external radial electric field (0.1 - 2 MV/m), and a nearly axial magnetic field (B<0.4T) inducing azimuthal drifts and confining electrons with energies between 0.1-1 keV. The experimental diagnostics include current, voltage, and Faraday probes, and in future plans imaging via phosphor screen, optical emission spectroscopy, streak camera imaging, and, potentially, electric field distribution via the Stark effect. Moreover, T-REX is also designed to be capable of detecting potential growth of diocotron modes via such diagnostics in combination with a segmented outer electrode. Through T-REX, we aim to gain valuable insights into the trap** and dynamics of electrons within MIG regions, paving the way for improved gyrotron performance and reliability in magnetic fusion reactors. △ Less

Submitted 27 June, 2024; originally announced June 2024.

Performance Test Methodology for Atmosphere-Breathing Electric Propulsion Intakes in an Atomic Oxygen Facility

Authors: Alexander T. Cushen, Vitor T. A. Oiko, Katharine L. Smith, Nicholas H. Crisp, Peter C. E. Roberts, Francesco Romano, Konstantinos Papavramidis, Georg Herdrich

Abstract: The testing of atmosphere-breathing electric propulsion intakes is an important step in the development of functional propulsion systems which provide sustained drag compensation in very low Earth orbits. To make satellite operations more sustainable, it is necessary to develop new materials which withstand erosion, long-lasting propulsion systems to overcome drag, and tools that allow for ground-… ▽ More The testing of atmosphere-breathing electric propulsion intakes is an important step in the development of functional propulsion systems which provide sustained drag compensation in very low Earth orbits. To make satellite operations more sustainable, it is necessary to develop new materials which withstand erosion, long-lasting propulsion systems to overcome drag, and tools that allow for ground-based testing. Among the tools to enable these innovations is the Rarefied Orbital Aerodynamics Research facility at the University of Manchester. Here, a description of the facility is provided together with two different methodologies for testing sub-scaled intake designs for atmosphere-breathing electric propulsion systems. The first methodology is based on measurements of the pressure difference between the two extremities of the intake, while the second uses a gas sensor to measure the collection efficiency of the intake. Direct Simulation Monte Carlo models have been used to assess the viability of the proposed testing methodologies. The results of this analysis indicate that either methodology or a combination of both can provide suitable measurements to assess the performance of future intake designs. △ Less

Submitted 10 June, 2024; originally announced June 2024.

Inverse design of a pyrochlore lattice of DNA origami through model-driven experiments

Authors: Hao Liu, Michael Matthies, John Russo, Lorenzo Rovigatti, Raghu Pradeep Narayanan, Thong Diep, Daniel McKeen, Oleg Gang, Nicholas Stephanopoulos, Francesco Sciortino, Hao Yan, Flavio Romano, Petr Šulc

Abstract: Sophisticated statistical mechanics approaches and human intuition have demonstrated the possibility to self-assemble complex lattices or finite size constructs, but have mostly only been successful in silico. The proposed strategies quite often fail in experiment due to unpredicted traps associated to kinetic slowing down (gelation, glass transition), as well as to competing ordered structures. A… ▽ More Sophisticated statistical mechanics approaches and human intuition have demonstrated the possibility to self-assemble complex lattices or finite size constructs, but have mostly only been successful in silico. The proposed strategies quite often fail in experiment due to unpredicted traps associated to kinetic slowing down (gelation, glass transition), as well as to competing ordered structures. An additional challenge that theoretical predictions face is the difficulty to encode the desired inter-particle interaction potential with the currently available library of nano- and micron-sized particles. To overcome these issues, we conjugate here SAT-assembly -- a patchy-particle interaction design algorithm based on constrained optimization solvers -- with coarse-grained simulations of DNA nanotechnology to experimentally realize trap-free self-assembly pathways. As a proof of concept we investigate the assembly of the pyrochlore (also known as tetrastack) lattice, a highly coveted 3D crystal lattice due to its promise in construction of optical metamaterials. We confirm the successful assembly with two different patchy DNA origami designs via SAXS as well as SEM visualization of the silica-coated lattice. Our approach offers a versatile modeling pipeline that starts from patchy particles designed in silico and ends with wireframe DNA origami that self-assemble into the desired structure. △ Less

Submitted 17 October, 2023; originally announced October 2023.

Comments: main text: 8 pages, supplementary material: 53 pages

Journal ref: Science 384,776-781 (2024)

A Non-Intrusive Data-Driven Reduced Order Model for Parametrized CFD-DEM Numerical Simulations

Authors: Arash Hajisharifi, Francesco Romano`, Michele Girfoglio, Andrea Beccari, Domenico Bonanni, Gianluigi Rozza

Abstract: The investigation of fluid-solid systems is very important in a lot of industrial processes. From a computational point of view, the simulation of such systems is very expensive, especially when a huge number of parametric configurations needs to be studied. In this context, we develop a non-intrusive data-driven reduced order model (ROM) built using the proper orthogonal decomposition with interp… ▽ More The investigation of fluid-solid systems is very important in a lot of industrial processes. From a computational point of view, the simulation of such systems is very expensive, especially when a huge number of parametric configurations needs to be studied. In this context, we develop a non-intrusive data-driven reduced order model (ROM) built using the proper orthogonal decomposition with interpolation (PODI) method for Computational Fluid Dynamics (CFD) -- Discrete Element Method (DEM) simulations. The main novelties of the proposed approach rely in (i) the combination of ROM and FV methods, (ii) a numerical sensitivity analysis of the ROM accuracy with respect to the number of POD modes and to the cardinality of the training set and (iii) a parametric study with respect to the Stokes number. We test our ROM on the fluidized bed benchmark problem. The accuracy of the ROM is assessed against results obtained with the FOM both for Eulerian (the fluid volume fraction) and Lagrangian (position and velocity of the particles) quantities. We also discuss the efficiency of our ROM approach. △ Less

Submitted 24 February, 2023; originally announced February 2023.

Journal ref: July 2023-Journal of Computational Physics

Assessment of the reliability of Deconvolution Procedures for RCF Spectroscopy of Laser-Driven Ion Beams

Authors: S. McCallum, G. Milluzzo, M. Borghesi, A. Subiel, F. Romano

Abstract: Laser-driven ion beams are defined by a number of unique features, including a large spread in energy. A stack configuration of radiochromic film (RCF) can be utilized to characterize such beams through measurements of their energy spectra. A spectroscopic procedure is reported that allows the proton energy density within each active layer of a radiochromic film (RCF) stack to be retrieved. This i… ▽ More Laser-driven ion beams are defined by a number of unique features, including a large spread in energy. A stack configuration of radiochromic film (RCF) can be utilized to characterize such beams through measurements of their energy spectra. A spectroscopic procedure is reported that allows the proton energy density within each active layer of a radiochromic film (RCF) stack to be retrieved. This is based upon on a deconvolution algorithm developed through Geant4 Monte Carlo simulations to correct the contributions of energy depositions within a given film layer. Through Monte Carlo calculations, the spectrum retrieved from a simulated film stack can be retrieved and compared with a known energy spectrum, providing an examination of the efficacy of this tool. Application of the developed deconvolution procedure thus offers the potential to correctly reconstruct the incident energy spectrum of a laser-driven proton and ion beam from a stack of irradiated RCF. △ Less

Submitted 20 January, 2023; originally announced January 2023.

Comments: 6 pages, 3 figures, submission as a proceeding to ECPD 2021

Journal ref: Journal of Instrumentation, Volume 17, February 2022

Effects of elastoviscoplastic properties of mucus on airway closure in healthy and pathological conditions

Authors: O. Erken, B. Fazla, F. Romanò, J. B. Grotberg, D. Izbassarov, M. Muradoglu

Abstract: Airway mucus is a complex material with both viscoelastic and viscoplastic properties that vary with healthy and pathological lung conditions. In this study, the effects of these conditions on airway closure are examined in a model problem, where an elastoviscoplastic (EVP) single liquid layer lines the inner wall of a rigid pipe and surrounds the air core. The EVP liquid layer is modelled using t… ▽ More Airway mucus is a complex material with both viscoelastic and viscoplastic properties that vary with healthy and pathological lung conditions. In this study, the effects of these conditions on airway closure are examined in a model problem, where an elastoviscoplastic (EVP) single liquid layer lines the inner wall of a rigid pipe and surrounds the air core. The EVP liquid layer is modelled using the Saramito-HB model. Model parameters are obtained for the mucus in healthy, asthma, chronic obstructive pulmonary disease (COPD) and cystic fibrosis (CF) conditions by fitting the rheological model to experimental data. Then, liquid plug formation is studied by varying the Laplace number and undisturbed liquid film thickness. According to previous studies, airway epithelial cells can be damaged by high peak of the wall stresses and stress gradients during liquid plug formation. Here, we show that these stresses are also related to the EVP features of the liquid layer. Yielded zones of the liquid layer are examined for different mucus conditions. Before closure, liquid layer is found to be unyielded, indicating that this phase is dominated by the elastic behaviour and solvent viscosity. This is further confirmed by showing that the elastic coefficient is important in determining whether closure occurs or not. Wall stresses are also investigated for pathological and healthy cases. Their peaks are higher in COPD and CF due to the viscoelastic extra stress contribution. Unlike the Newtonian case, COPD and CF wall stresses do not relax after closure but remain approximately as high as the Newtonian peak. Moreover, the local normal wall stress gradients are smaller in COPD and CF liquid layers since their higher stiffness causes smaller curvature at the capillary wave. The local tangential wall stress gradients are also lower in these cases due to slower accumulation of the liquid at the bulge. △ Less

Submitted 25 November, 2022; originally announced November 2022.

Design of an Intake and a Thruster for an Atmosphere-Breathing Electric Propulsion System

Authors: F. Romano, G. Herdrich, Y. -A. Chan, N. H. Crisp, P. C. E. Roberts, B. E. A. Holmes, S. Edmondson, S. Haigh, A. Macario-Rojas, V. T. A. Oiko, L. A. Sinpetru K. Smith, J. Becedas, V. Sulliotti-Linner, M. Bisgaard, S. Christensen, V. Hanessian, T. Kauffman Jensen, J. Nielsen, S. Fasoulas, C. Traub, D. García-Almiñana, S. Rodríguez-Donaire, M. Sureda, D. Kataria, B. Belkouchi , et al. (3 additional authors not shown)

Abstract: Challenging space missions include those at very low altitudes, where the atmosphere is source of aerodynamic drag on the spacecraft that finally defines the missions lifetime unless way to compensate for it is provided. This environment is named Very Low Earth Orbit (VLEO) and is defined for $h<450~km$. In addition to the satellite's aerodynamic design, to extend the lifetime of such missions an… ▽ More Challenging space missions include those at very low altitudes, where the atmosphere is source of aerodynamic drag on the spacecraft that finally defines the missions lifetime unless way to compensate for it is provided. This environment is named Very Low Earth Orbit (VLEO) and is defined for $h<450~km$. In addition to the satellite's aerodynamic design, to extend the lifetime of such missions an efficient propulsion system is required. One solution is Atmosphere-Breathing Electric Propulsion (ABEP) that collects atmospheric particles to be used as propellant for an electric thruster. The system would minimize the requirement of limited propellant availability and can also be applied to any planetary body with atmosphere, enabling new missions at low altitude ranges for longer times. One of the objectives of the H2020 DISCOVERER project, is the development of an intake and an electrode-less plasma thruster for an ABEP system. The article describes the characteristics of intake design and the respective final deigns providing collection efficiencies up to $94\%$. On the other side, the radio frequency (RF) Helicon-based plasma thruster (IPT) developed at IRS, is hereby presented as well, while its performances are being evaluated, the thruster has been operated with single atmospheric species as propellant, and has highlighted very low input power requirement for operation at comparable mass flow rates $P\sim 60~W$. △ Less

Submitted 23 November, 2022; v1 submitted 18 November, 2022; originally announced November 2022.

Comments: arXiv admin note: substantial text overlap with arXiv:2106.15912

Journal ref: CEAS Space Journal 14, 707-715 (2022)

Development and analysis of novel mission scenarios based on Atmosphere-Breathing Electric Propulsion (ABEP)

Authors: S. Vaidya, C. Traub, F. Romano, G. Herdrich, Y. -A. Chan, S. Fasoulas, P. C. E. Roberts, N. Crisp, S. Edmondson, S. Haigh, B. A. Holmes, A. Macario-Rojas, V. T. Abrao Oiko, K. Smith, L. Sinpetru, J. Becedas, V. Sulliotti-Linner, S. Christensen, V. Hanessian, T. K. Jensen, J. Nielsen, M. Bisgaard, D. Garcia-Alminana, S. Rodriguez-Donaire, M. Suerda , et al. (6 additional authors not shown)

Abstract: Operating satellites in Very Low Earth Orbit (VLEO) benefits the already expanding New Space industry in applications including Earth Observation and beyond. However, long-term operations at such low altitudes require propulsion systems to compensate for the large aerodynamic drag forces. When using conventional propulsion systems, the amount of storable propellant limits the maximum mission lifet… ▽ More Operating satellites in Very Low Earth Orbit (VLEO) benefits the already expanding New Space industry in applications including Earth Observation and beyond. However, long-term operations at such low altitudes require propulsion systems to compensate for the large aerodynamic drag forces. When using conventional propulsion systems, the amount of storable propellant limits the maximum mission lifetime. The latter can be avoided by employing Atmosphere-Breathing Electric Propulsion (ABEP) system, which collects the residual atmospheric particles and uses them as propellant for an electric thruster. Thus, the requirement of on-board propellant storage can ideally be nullified. At the Institute of Space Systems (IRS) of the University of Stuttgart, an intake, and a RF Helicon-based Plasma Thruster (IPT) for ABEP system are developed within the Horizons 2020 funded DISCOVERER project. In order to assess possible future use cases, this paper proposes and analyzes several novel ABEP based mission scenarios. Beginning with technology demonstration mission in VLEO, more complex mission scenarios are derived and discussed in detail. These include, amongst others, orbit maintenance around Mars as well as refuelling and space tug missions. The results show that the ABEP system is not only able to compensate drag for orbit maintenance but also capable of performing orbital maneuvers and collect propellant for applications such as Space Tug and Refuelling. Thus, showing a multitude of different future mission applications. △ Less

Submitted 21 November, 2022; v1 submitted 17 November, 2022; originally announced November 2022.

A proton-recoil track imaging system for fast neutrons: the RIPTIDE detector

Authors: P. Console Camprini, F. Leone, C. Massimi, A. Musumarra, M. G. Pellegriti, C. Pisanti, F. Romano, R. Spighi, N. Terranova, M. Villa

Abstract: Fast neutron detection is often based on the neutron-proton elastic scattering reaction: the ionization caused by recoil protons in a hydrogenous material constitutes the basic information for the design and development of a class of neutron detectors. Although experimental techniques have continuously improved, proton-recoil track imaging remains still at the frontier of n-detection systems, due… ▽ More Fast neutron detection is often based on the neutron-proton elastic scattering reaction: the ionization caused by recoil protons in a hydrogenous material constitutes the basic information for the design and development of a class of neutron detectors. Although experimental techniques have continuously improved, proton-recoil track imaging remains still at the frontier of n-detection systems, due to the high photon sensitivity required. Several state-of-the-art approaches for neutron tracking by using n-p single and double scattering - referred to as Recoil Proton Track Imaging (RPTI) - can be found in the literature. So far, they have showed limits in terms of detection efficiency, complexity, cost, and implementation. In order to address some of these deficiencies, we have proposed RIPTIDE a novel recoil-proton track imaging detector in which the light output produced by a fast scintillator is used to perform a complete reconstruction in space and time of the interaction events. The proposed idea is viable thanks to the dramatic advances in low noise and single photon counting achieved in the last decade by new scientific CMOS cameras as well as pixel sensors, like Timepix or MIMOSIS. In this contribution, we report the advances on the RIPTIDE concept: Geant4 Monte Carlo simulations, light collection tests as well as state-of-the-art approach to image readout, processing and fast analysis. △ Less

Submitted 6 November, 2022; v1 submitted 31 October, 2022; originally announced October 2022.

Comments: proceeding of the 23rd International Workshop on Radiation Imaging Detectors, IWoRID 2022, 26-30 June 2022, Riva del Garda (TN), Italy

Self-consistent formation and steady-state characterisation of trapped high energy electron clouds in the presence of a neutral gas background

Authors: G. Le Bars, J. -Ph. Hogge, J. Loizu, S. Alberti, F. Romano, A. Cerfon

Abstract: This study considers the self-consistent formation and dynamics of electron clouds interacting with a background neutral gas through elastic and inelastic (ionisation) collisions in coaxial geometries similar to gyrotron electron guns. These clouds remain axially trapped as the result of crossed magnetic field lines and electric equipotential lines creating potential wells similar to those used in… ▽ More This study considers the self-consistent formation and dynamics of electron clouds interacting with a background neutral gas through elastic and inelastic (ionisation) collisions in coaxial geometries similar to gyrotron electron guns. These clouds remain axially trapped as the result of crossed magnetic field lines and electric equipotential lines creating potential wells similar to those used in Penning traps. Contrary to standard Penning traps, in this study we consider a strong externally applied radial electric field which is of the same order as that of the space-charge field. In particular, the combination of coaxial geometry, strong radial electric fields and electron collisions with the residual neutral gas (RNG) present in the chamber induce non-negligible radial particle transport and ionisation. In this paper, the dynamics of the cloud density and currents resulting from electron-neutral collisions are studied using a 2D3V particle-in-cell code. Simulation results and parametric scans are hereby presented. Finally, a fluid model is derived to explain and predict the cloud peak density and peak radial current depending on the externally applied electric and magnetic fields, and on the RNG pressure. △ Less

Submitted 29 June, 2022; originally announced June 2022.

Comments: 10 pages, 14 figures, This material has been submitted to Physics of Plasmas from AIP publishing

A simple solution to the problem of self-assembling cubic diamond crystals

Authors: Lorenzo Rovigatti, John Russo, Flavio Romano, Michael Matthies, Lukáš Kroc, Petr Šulc

Abstract: The self-assembly of colloidal diamond (CD) crystals is considered as one of the most coveted goals of nanotechnology, both from the technological and fundamental points of view. For applications, colloidal diamond is a photonic crystal which can open new possibilities of manipulating light for information processing. From a fundamental point of view, its unique symmetry exacerbates a series of pr… ▽ More The self-assembly of colloidal diamond (CD) crystals is considered as one of the most coveted goals of nanotechnology, both from the technological and fundamental points of view. For applications, colloidal diamond is a photonic crystal which can open new possibilities of manipulating light for information processing. From a fundamental point of view, its unique symmetry exacerbates a series of problems that are commonly faced during the self-assembly of target structures, such as the presence of kinetic traps and the formation of crystalline defects and alternative structures (polymorphs). Here we demonstrate that all these problems can be systematically addressed via SAT-assembly, a design framework that converts self-assembly into a satisfiability problem. Contrary to previous solutions (requiring four or more components), we prove that the assembly of the CD crystal only requires a binary mixture. Moreover, we use molecular dynamics simulations of a system composed by nearly a million nucleotides to test a DNA nanotechnology design that constitutes a promising candidate for experimental realization. △ Less

Submitted 21 May, 2022; originally announced May 2022.

Comments: 12 pages, 4 figures

Journal ref: Nanoscale 14.38 (2022): 14268-14275

Design of the ELIMAIA ion collection system

Authors: F. Schillaci, G. A. P. Cirrone, G. Cuttone, M. Maggiore, L. Ando, A. Amato, M. Costa, G. Gallo, G. Korn, G. Larosa, R. Leanza, R. Manna, D. Margarone, G. Milluzzo, S. Pulvirenti, F. Romano, S. Salamone, M. Sedita, V. Scuderia, A. Tramontana

Abstract: A system of permanent magnet quadrupoles (PMQs) is going to be realized by INFNLNS to be used as a collection system for the injection of laser driven ion beams up to 60 AMeV in an energy selector based on four resistive dipoles. This system is the first element of the ELIMED (ELI-Beamlines MEDical and Multidisciplinary applications) beam transport, dosimetry and irradiation line that will be deve… ▽ More A system of permanent magnet quadrupoles (PMQs) is going to be realized by INFNLNS to be used as a collection system for the injection of laser driven ion beams up to 60 AMeV in an energy selector based on four resistive dipoles. This system is the first element of the ELIMED (ELI-Beamlines MEDical and Multidisciplinary applications) beam transport, dosimetry and irradiation line that will be developed by INFN-LNS (It) and installed at the ELI-Beamlines facility in Prague (Cz). ELIMED will be the first users open transport beam-line where a controlled laser-driven ion beam will be used for multidisciplinary researches. The definition of well specified characteristics, both in terms of performances and field quality, of the magnetic lenses is crucial for the system realization, for the accurate study of the beam dynamics and for the proper matching with the magnetic selection system which will be designed in the next months. Here, we report the design of the collection system and the adopted solutions in order to realize a robust system form the magnetic point of view. Moreover, the first preliminary transport simulations are also described. △ Less

Submitted 1 January, 2022; originally announced January 2022.

Journal ref: Journal of Instrumentation, Volume 10, December 2015

ADBSat: Verification and validation of a novel panel method for quick aerodynamic analysis of satellites

Authors: Luciana Sinpetru, Nicholas H. Crisp, Peter C. E. Roberts, Valeria Sulliotti-Linner, Virginia Hanessian, Georg H. Herdrich, Francesco Romano, Daniel Garcia-Alminana, Silvia Rodriguez-Donaire, Simon Seminari

Abstract: We present the validation of ADBSat, a novel implementation of the panel method including a fast pseudo-shading algorithm, that can quickly and accurately determine the forces and torques on satellites in free-molecular flow. Our main method of validation is comparing test cases between ADBSat, the current de facto standard of direct simulation Monte Carlo (DSMC), and published literature. ADBSat… ▽ More We present the validation of ADBSat, a novel implementation of the panel method including a fast pseudo-shading algorithm, that can quickly and accurately determine the forces and torques on satellites in free-molecular flow. Our main method of validation is comparing test cases between ADBSat, the current de facto standard of direct simulation Monte Carlo (DSMC), and published literature. ADBSat exhibits a significantly shorter runtime than DSMC and performs well, except where deep concavities are present in the satellite models. The shading algorithm also experiences problems when a large proportion of the satellite surface area is oriented parallel to the flow, but this can be mitigated by examining the body at small angles to this configuration (${\pm}$ 0.1°). We recommend that an error interval on ADBSat outputs of up to 3\% is adopted. Therefore, ADBSat is a suitable tool for quickly determining the aerodynamic characteristics of a wide range of satellite geometries in different environmental conditions in VLEO. It can also be used in a complementary manner to identify cases that warrant further investigation using other numerical-based methods. △ Less

Submitted 22 February, 2022; v1 submitted 12 October, 2021; originally announced October 2021.

Comments: 30 pages, 15 figures. Submitted to Computer Physics Communications

RIPTIDE: a novel recoil-proton track imaging detector for fast neutrons

Authors: Agatino Musumarra, Franco Leone, Cristian Massimi, Maria Grazia Pellegriti, Francesco Romano, Roberto Spighi, Mauro Villa

Abstract: Neutron detectors are an essential tool for the development of many research fields, as nuclear, particle and astroparticle physics as well as radiotherapy and radiation safety. Since neutrons cannot directly ionize, their detection is only possible via nuclear reactions. Consequently, neutron-based experimental techniques are related to the detection of charged particle or electromagnetic radiati… ▽ More Neutron detectors are an essential tool for the development of many research fields, as nuclear, particle and astroparticle physics as well as radiotherapy and radiation safety. Since neutrons cannot directly ionize, their detection is only possible via nuclear reactions. Consequently, neutron-based experimental techniques are related to the detection of charged particle or electromagnetic radiation originating from neutron-induced reactions. The study of fast neutrons is often based on the neutron-proton elastic scattering reaction. In this case, the ionization induced by the recoil protons in a hydrogenous material constitutes the basic information for the design and development of neutron detectors. Although experimental techniques have continuously improved and refined, so far, proton-recoil track imaging is still weak in laboratory rate environments because of the extremely small detection efficiency. To address this deficiency, we propose a novel recoil-proton track imaging system in which the light deriving from a fast scintillation signal is used to perform a complete reconstruction in space and time of the event. In particular, we report the idea of RIPTIDE (RecoIl Proton Track Imaging DEtector): an innovative system which combines a plastic scintillator coupled to imaging devices, based on CMOS technology, or Micro Channel Plate sensors. The proposed apparatus aims at providing neutron spectrometry capability by stereoscopically imaging the recoil-protons tracks, correlating the spatial information with the time information. △ Less

Submitted 7 December, 2023; v1 submitted 23 September, 2021; originally announced September 2021.

Intake Design for an Atmosphere-Breathing Electric Propulsion System (ABEP)

Authors: F. Romano, J. Espinosa-Orozco, M. Pfeiffer, G. Herdrich, N. H. Crisp, P. C. E. Roberts, B. E. A. Holmes, S. Edmondson, S. Haigh, S. Livadiotti, A. Macario-Rojas, V. T. A. Oiko, L. A. Sinpetru, K. Smith, J. Becedas, V. Sulliotti-Linner, M. Bisgaard, S. Christensen, V. Hanessian, T. Kauffman Jensen, J. Nielsen, Y. -A. Chan, S. Fasoulas, C. Traub, D. García-Almiñana , et al. (7 additional authors not shown)

Abstract: Challenging space missions include those at very low altitudes, where the atmosphere is source of aerodynamic drag on the spacecraft. To extend the lifetime of such missions, an efficient propulsion system is required. One solution is Atmosphere-Breathing Electric Propulsion (ABEP) that collects atmospheric particles to be used as propellant for an electric thruster. The system would minimize the… ▽ More Challenging space missions include those at very low altitudes, where the atmosphere is source of aerodynamic drag on the spacecraft. To extend the lifetime of such missions, an efficient propulsion system is required. One solution is Atmosphere-Breathing Electric Propulsion (ABEP) that collects atmospheric particles to be used as propellant for an electric thruster. The system would minimize the requirement of limited propellant availability and can also be applied to any planetary body with atmosphere, enabling new missions at low altitude ranges for longer times. IRS is develo**, within the H2020 DISCOVERER project, an intake and a thruster for an ABEP system. The article describes the design and simulation of the intake, optimized to feed the radio frequency (RF) Helicon-based plasma thruster developed at IRS. The article deals in particular with the design of intakes based on diffuse and specular reflecting materials, which are analysed by the PICLas DSMC-PIC tool. Orbital altitudes $h=150-250$ km and the respective species based on the NRLMSISE-00 model (O, $N_2$, $O_2$, He, Ar, H, N) are investigated for several concepts based on fully diffuse and specular scattering, including hybrid designs. The major focus has been on the intake efficiency defined as $η_c=\dot{N}_{out}/\dot{N}_{in}$, with $\dot{N}_{in}$ the incoming particle flux, and $\dot{N}_{out}$ the one collected by the intake. Finally, two concepts are selected and presented providing the best expected performance for the operation with the selected thruster. The first one is based on fully diffuse accommodation yielding to $η_c<0.46$ and the second one based un fully specular accommodation yielding to $η_c<0.94$. Finally, also the influence of misalignment with the flow is analysed, highlighting a strong dependence of $η_c$ in the diffuse-based intake while, ... △ Less

Submitted 1 July, 2021; v1 submitted 30 June, 2021; originally announced June 2021.

Comments: Accepted Version

System Analysis and Test-Bed for an Atmosphere-Breathing Electric Propulsion System using an Inductive Plasma Thruster

Authors: Francesco Romano, Bartomeu Massutí-Ballester, Tilman Binder, Georg Herdrich, Stefanos Fasoulas, Tony Schönherr

Abstract: Challenging space mission scenarios include those in low altitude orbits, where the atmosphere creates significant drag to the S/C and forces their orbit to an early decay. For drag compensation, propulsion systems are needed, requiring propellant to be carried on-board. An atmosphere-breathing electric propulsion system (ABEP) ingests the residual atmosphere particles through an intake and uses t… ▽ More Challenging space mission scenarios include those in low altitude orbits, where the atmosphere creates significant drag to the S/C and forces their orbit to an early decay. For drag compensation, propulsion systems are needed, requiring propellant to be carried on-board. An atmosphere-breathing electric propulsion system (ABEP) ingests the residual atmosphere particles through an intake and uses them as propellant for an electric thruster. Theoretically applicable to any planet with atmosphere, the system might allow to orbit for unlimited time without carrying propellant. A new range of altitudes for continuous operation would become accessible, enabling new scientific missions while reducing costs. Preliminary studies have shown that the collectible propellant flow for an ion thruster (in LEO) might not be enough, and that electrode erosion due to aggressive gases, such as atomic oxygen, will limit the thruster lifetime. In this paper an inductive plasma thruster (IPT) is considered for the ABEP system. The starting point is a small scale inductively heated plasma generator IPG6-S. These devices are electrodeless and have already shown high electric-to-thermal coupling efficiencies using O2 and CO2. The system analysis is integrated with IPG6-S tests to assess mean mass-specific energies of the plasma plume and estimate exhaust velocities. △ Less

Submitted 4 March, 2021; v1 submitted 3 March, 2021; originally announced March 2021.

In-Orbit Aerodynamic Coefficient Measurements using SOAR (Satellite for Orbital Aerodynamics Research)

Authors: N. H. Crisp, P. C. E. Roberts, S. Livadiotti, A. Macario Rojas, V. T. A. Oiko, S. Edmondson, S. J. Haigh, B. E. A. Holmes, L. A. Sinpetru, K. L. Smith, J. Becedas, R. M. Dominguez, V. Sulliotti-Linner, S. Christensen, J. Nielsen, M. Bisgaard, Y-A. Chan, S. Fasoulas, G. H. Herdrich, F. Romano, C. Traub, D. Garcia-Alminana, S. Rodriguez-Donaire, M. Sureda, D. Kataria , et al. (4 additional authors not shown)

Abstract: The Satellite for Orbital Aerodynamics Research (SOAR) is a CubeSat mission, due to be launched in 2021, to investigate the interaction between different materials and the atmospheric flow regime in very low Earth orbits (VLEO). Improving knowledge of the gas-surface interactions at these altitudes and identification of novel materials that can minimise drag or improve aerodynamic control are impo… ▽ More The Satellite for Orbital Aerodynamics Research (SOAR) is a CubeSat mission, due to be launched in 2021, to investigate the interaction between different materials and the atmospheric flow regime in very low Earth orbits (VLEO). Improving knowledge of the gas-surface interactions at these altitudes and identification of novel materials that can minimise drag or improve aerodynamic control are important for the design of future spacecraft that can operate in lower altitude orbits. Such satellites may be smaller and cheaper to develop or can provide improved Earth observation data or communications link-budgets and latency. Using precise orbit and attitude determination information and the measured atmospheric flow characteristics the forces and torques experienced by the satellite in orbit can be studied and estimates of the aerodynamic coefficients calculated. This paper presents the scientific concept and design of the SOAR mission. The methodology for recovery of the aerodynamic coefficients from the measured orbit, attitude, and in-situ atmospheric data using a least-squares orbit determination and free-parameter fitting process is described and the experimental uncertainty of the resolved aerodynamic coefficients is estimated. The presented results indicate that the combination of the satellite design and experimental methodology are capable of clearly illustrating the variation of drag and lift coefficient for differing surface incidence angle. The lowest uncertainties for the drag coefficient measurement are found at approximately 300 km, whilst the measurement of lift coefficient improves for reducing orbital altitude to 200 km. △ Less

Submitted 17 December, 2020; v1 submitted 14 December, 2020; originally announced December 2020.

Comments: 19 pages, 11 figures. Accepted for publication in Acta Astronautica (2020-12-14)

Journal ref: Acta Astronautica, vol. 180 (2021)

A Review of Gas-Surface Interaction Models for Orbital Aerodynamics Applications

Authors: Sabrina Livadiotti, Nicholas H. Crisp, Peter C. E. Roberts, Stephen D. Worrall, Vitor T. A. Oiko, Steve Edmondson, Sarah J. Haigh, Claire Huyton, Katharine L. Smith, Luciana A. Sinpetru, Brandon E. A. Holmes, Jonathan Becedas, Rosa María Domínguez, Valentín Cañas, Simon Christensen, Anders Mølgaard, Jens Nielsen, Morten Bisgaard, Yung-An Chan, Georg H. Herdrich, Francesco Romano, Stefanos Fasoulas, Constantin Traub, Daniel Garcia-Almiñana, Silvia Rodriguez-Donaire , et al. (7 additional authors not shown)

Abstract: Renewed interest in Very Low Earth Orbits (VLEO) - i.e. altitudes below 450 km - has led to an increased demand for accurate environment characterisation and aerodynamic force prediction. While the former requires knowledge of the mechanisms that drive density variations in the thermosphere, the latter also depends on the interactions between the gas-particles in the residual atmosphere and the su… ▽ More Renewed interest in Very Low Earth Orbits (VLEO) - i.e. altitudes below 450 km - has led to an increased demand for accurate environment characterisation and aerodynamic force prediction. While the former requires knowledge of the mechanisms that drive density variations in the thermosphere, the latter also depends on the interactions between the gas-particles in the residual atmosphere and the surfaces exposed to the flow. The determination of the aerodynamic coefficients is hindered by the numerous uncertainties that characterise the physical processes occurring at the exposed surfaces. Several models have been produced over the last 60 years with the intent of combining accuracy with relatively simple implementations. In this paper the most popular models have been selected and reviewed using as discriminating factors relevance with regards to orbital aerodynamics applications and theoretical agreement with gas-beam experimental data. More sophisticated models were neglected, since their increased accuracy is generally accompanied by a substantial increase in computation times which is likely to be unsuitable for most space engineering applications. For the sake of clarity, a distinction was introduced between physical and scattering kernel theory based gas-surface interaction models. The physical model category comprises the Hard Cube model, the Soft Cube model and the Washboard model, while the scattering kernel family consists of the Maxwell model, the Nocilla-Hurlbut-Sherman model and the Cercignani-Lampis-Lord model. Limits and assets of each model have been discussed with regards to the context of this paper. Wherever possible, comments have been provided to help the reader to identify possible future challenges for gas-surface interaction science with regards to orbital aerodynamic applications. △ Less

Submitted 22 November, 2020; v1 submitted 1 October, 2020; originally announced October 2020.

Comments: Journal paper (accepted for publication in "Progress in Aerospace Sciences") Replacement: Corrected typos in Equations

Journal ref: Progress in Aerospace Sciences, vol. 119 (2020)

Designing patchy interactions to self-assemble arbitrary structures

Authors: Flavio Romano, John Russo, Lukáš Kroc, Petr Šulc

Abstract: One of the fundamental goals of nanotechnology is to exploit selective and directional interactions between molecules to design particles that self-assemble into desired structures, from capsids, to nano-clusters, to fully formed crystals with target properties (e.g. optical, mechanical, etc.). Here we provide a general framework which transforms the inverse problem of self-assembly of colloidal c… ▽ More One of the fundamental goals of nanotechnology is to exploit selective and directional interactions between molecules to design particles that self-assemble into desired structures, from capsids, to nano-clusters, to fully formed crystals with target properties (e.g. optical, mechanical, etc.). Here we provide a general framework which transforms the inverse problem of self-assembly of colloidal crystals into a Boolean satisfiability problem for which solutions can be found numerically. Given a reference structure and the desired number of components, our approach produces designs for which the target structure is an energy minimum, and also allows to exclude solutions that correspond to competing structures. We demonstrate the effectiveness of our approach by designing model particles that spontaneously nucleate milestone structures such as the cubic diamond, the pyrochlore and the clathrate lattices. △ Less

Submitted 10 September, 2020; v1 submitted 31 July, 2020; originally announced July 2020.

Comments: 12 pages, 3 figures

MSC Class: 10.1103/PhysRevLett.125.118003

Journal ref: Phys. Rev. Lett. 125, 118003 (2020)

Measuring internal forces in single-stranded DNA: Application to a DNA force clamp

Authors: Megan C. Engel, Flavio Romano, Ard A. Louis, Jonathan P. K. Doye

Abstract: We present a new method for calculating internal forces in DNA structures using coarse-grained models and demonstrate its utility with the oxDNA model. The instantaneous forces on individual nucleotides are explored and related to model potentials, and using our framework, internal forces are calculated for two simple DNA systems and for a recently-published nanoscopic force clamp. Our results hig… ▽ More We present a new method for calculating internal forces in DNA structures using coarse-grained models and demonstrate its utility with the oxDNA model. The instantaneous forces on individual nucleotides are explored and related to model potentials, and using our framework, internal forces are calculated for two simple DNA systems and for a recently-published nanoscopic force clamp. Our results highlight some pitfalls associated with conventional methods for estimating internal forces, which are based on elastic polymer models, and emphasise the importance of carefully considering secondary structure and ionic conditions when modelling the elastic behaviour of single-stranded DNA. Beyond its relevance to the DNA nanotechnological community, we expect our approach to be broadly applicable to calculations of internal force in a variety of structures -- from DNA to protein -- and across other coarse-grained simulation models. △ Less

Submitted 27 July, 2020; originally announced July 2020.

Comments: 39 pages, 9 figures

Journal ref: J. Chem. Theor. Comput. 16, 7764-7775 (2020)

The Benefits of Very Low Earth Orbit for Earth Observation Missions

Authors: N. H. Crisp, P. C. E. Roberts, S. Livadiotti, V. T. A. Oiko, S. Edmondson, S. J. Haigh, C. Huyton, L. Sinpetru, K. L. Smith, S. D. Worrall, J. Becedas, R. M. Domínguez, D. González, V. Hanessian, A. Mølgaard, J. Nielsen, M. Bisgaard, Y. -A. Chan, S. Fasoulas, G. H. Herdrich, F. Romano, C. Traub, D. García-Almiñana, S. Rodríguez-Donaire, M. Sureda , et al. (8 additional authors not shown)

Abstract: Very low Earth orbits (VLEO), typically classified as orbits below approximately 450 km in altitude, have the potential to provide significant benefits to spacecraft over those that operate in higher altitude orbits. This paper provides a comprehensive review and analysis of these benefits to spacecraft operations in VLEO, with parametric investigation of those which apply specifically to Earth ob… ▽ More Very low Earth orbits (VLEO), typically classified as orbits below approximately 450 km in altitude, have the potential to provide significant benefits to spacecraft over those that operate in higher altitude orbits. This paper provides a comprehensive review and analysis of these benefits to spacecraft operations in VLEO, with parametric investigation of those which apply specifically to Earth observation missions. The most significant benefit for optical imaging systems is that a reduction in orbital altitude improves spatial resolution for a similar payload specification. Alternatively mass and volume savings can be made whilst maintaining a given performance. Similarly, for radar and lidar systems, the signal-to-noise ratio can be improved. Additional benefits include improved geospatial position accuracy, improvements in communications link-budgets, and greater launch vehicle insertion capability. The collision risk with orbital debris and radiation environment can be shown to be improved in lower altitude orbits, whilst compliance with IADC guidelines for spacecraft post-mission lifetime and deorbit is also assisted. Finally, VLEO offers opportunities to exploit novel atmosphere-breathing electric propulsion systems and aerodynamic attitude and orbit control methods. However, key challenges associated with our understanding of the lower thermosphere, aerodynamic drag, the requirement to provide a meaningful orbital lifetime whilst minimising spacecraft mass and complexity, and atomic oxygen erosion still require further research. Given the scope for significant commercial, societal, and environmental impact which can be realised with higher performing Earth observation platforms, renewed research efforts to address the challenges associated with VLEO operations are required. △ Less

Submitted 16 July, 2020; v1 submitted 15 July, 2020; originally announced July 2020.

Comments: 23 pages, 19 figures. Accepted for publication in Progress in Aerospace Sciences (24-04-2020)

Journal ref: Progress in Aerospace Sciences 117 (2020)

RF Helicon-based Inductive Plasma Thruster (IPT) Design for an Atmosphere-Breathing Electric Propulsion system (ABEP)

Authors: Francesco Romano, Yung-An Chan, Georg Herdrich, Peter C. E. Roberts, C. Traub S. Fasoulas, K. Smith, S. Edmondson, S. Haigh, N. H. Crisp, V. T. A. Oiko, S. D. Worrall, S. Livadiotti, C. Huyton, L. A. Sinpetru, A. Straker, J. Becedas, R. M. Domínguez, D. González, V. Cañas, V. Sulliotti-Linner, V. Hanessian, A. Mølgaard, J. Nielsen, M. Bisgaard, D. Garcia-Almiñana , et al. (10 additional authors not shown)

Abstract: Challenging space missions include those at very low altitudes, where the atmosphere is source of aerodynamic drag on the spacecraft. To extend such missions lifetime, an efficient propulsion system is required. One solution is Atmosphere-Breathing Electric Propulsion (ABEP). It collects atmospheric particles to be used as propellant for an electric thruster. The system would minimize the requirem… ▽ More Challenging space missions include those at very low altitudes, where the atmosphere is source of aerodynamic drag on the spacecraft. To extend such missions lifetime, an efficient propulsion system is required. One solution is Atmosphere-Breathing Electric Propulsion (ABEP). It collects atmospheric particles to be used as propellant for an electric thruster. The system would minimize the requirement of limited propellant availability and can also be applied to any planet with atmosphere, enabling new mission at low altitude ranges for longer times. Challenging is also the presence of reactive chemical species, such as atomic oxygen in Earth orbit. Such species cause erosion of (not only) propulsion system components, i.e. acceleration grids, electrodes, and discharge channels of conventional EP systems. IRS is develo** within the DISCOVERER project, an intake and a thruster for an ABEP system. The paper describes the design and implementation of the RF helicon-based inductive plasma thruster (IPT). This paper deals in particular with the design and implementation of a novel antenna called the birdcage antenna, a device well known in magnetic resonance imaging (MRI), and also lately employed for helicon-wave based plasma sources in fusion research. The IPT is based on RF electrodeless operation aided by an externally applied static magnetic field. The IPT is composed by an antenna, a discharge channel, a movable injector, and a solenoid. By changing the operational parameters along with the novel antenna design, the aim is to minimize losses in the RF circuit, and accelerate a quasi-neutral plasma plume. This is also to be aided by the formation of helicon waves within the plasma that are to improve the overall efficiency and achieve higher exhaust velocities. Finally, the designed IPT with a particular focus on the birdcage antenna design procedure is presented △ Less

Submitted 14 July, 2020; v1 submitted 13 July, 2020; originally announced July 2020.

A new energy spectrum reconstruction method for Time-Of-Flight diagnostics of high-energy laser-driven protons

Authors: G. Milluzzo, V. Scuderi, A. Alejo, A. G. Amico, N. Booth, M. Borghesi, G. A. P. Cirrone, G. Cuttone, D. Doria, J. Green, S. Kar, G. Korn, G. Larosa, R. Leanza, D. Margarone, P. Martin, P. McKenna, G. Petringa, J. Pipek, L. Romagnani, F. Romano, A. Russo, F. Schillaci

Abstract: The Time-of-Flight (ToF) technique coupled with semiconductor-like detectors, as silicon carbide and diamond, is one of the most promising diagnostic methods for high-energy, high repetition rate, laser-accelerated ions allowing a full on-line beam spectral characterization. A new analysis method for reconstructing the energy spectrum of high-energy laser-driven ion beams from TOF signals is hereb… ▽ More The Time-of-Flight (ToF) technique coupled with semiconductor-like detectors, as silicon carbide and diamond, is one of the most promising diagnostic methods for high-energy, high repetition rate, laser-accelerated ions allowing a full on-line beam spectral characterization. A new analysis method for reconstructing the energy spectrum of high-energy laser-driven ion beams from TOF signals is hereby presented and discussed. The proposed method takes into account the detector's working principle, through the accurate calculation of the energy loss in the detector active layer, using Monte Carlo simulations. The analysis method was validated against well-established diagnostics, such as the Thomson Parabola Spectrometer, during an experimental campaign carried out at the Rutherford Appleton Laboratory (RAL, UK) with the high-energy laser-driven protons accelerated by the VULCAN Petawatt laser. △ Less

Submitted 4 December, 2018; originally announced December 2018.

Oscillatory switching centrifugation: dynamics of a particle in a pulsating vortex

Authors: Francesco Romanò

Abstract: The dynamics of a small rigid spherical particle in an unbounded pulsating vortex is considered, kee** constant the particle Stokes number St and varying the particle-to-fluid density ratio $\varrho$ and the pulsation frequency of the vortex $ω$. We show that the asymptotic dynamics of a particle of given St and $\varrho$ can be controlled by varying $ω$, turning the vortex core either into an a… ▽ More The dynamics of a small rigid spherical particle in an unbounded pulsating vortex is considered, kee** constant the particle Stokes number St and varying the particle-to-fluid density ratio $\varrho$ and the pulsation frequency of the vortex $ω$. We show that the asymptotic dynamics of a particle of given St and $\varrho$ can be controlled by varying $ω$, turning the vortex core either into an attractor or a repellor. The creation of non-trivial particle limit cycles characterizes the boundaries between centrifugal and centripetal regions in parameter space. The discovered phenomenon is termed oscillatory switching centrifugation and its implications for particle demixing processes, biological protocols, lab-on-a-chip devices and dynamical system theory are discussed in the end. △ Less

Submitted 5 October, 2018; originally announced October 2018.

Comments: 12 pages, 6 figures

Coarse-grained modelling of the structural properties of DNA origami

Authors: Benedict E. K. Snodin, John S. Schreck, Flavio Romano, Ard A. Louis, Jonathan P. K. Doye

Abstract: We use the oxDNA coarse-grained model to provide a detailed characterization of the fundamental structural properties of DNA origamis, focussing on archetypal 2D and 3D origamis. The model reproduces well the characteristic pattern of helix bending in a 2D origami, showing that it stems from the intrinsic tendency of anti-parallel four-way junctions to splay apart, a tendency that is enhanced both… ▽ More We use the oxDNA coarse-grained model to provide a detailed characterization of the fundamental structural properties of DNA origamis, focussing on archetypal 2D and 3D origamis. The model reproduces well the characteristic pattern of helix bending in a 2D origami, showing that it stems from the intrinsic tendency of anti-parallel four-way junctions to splay apart, a tendency that is enhanced both by less screened electrostatic interactions and by increased thermal motion. We also compare to the structure of a 3D origami whose structure has been determined by cryo-electron microscopy. The oxDNA average structure has a root-mean-square deviation from the experimental structure of 8.4 Angstrom, which is of the order of the experimental resolution. These results illustrate that the oxDNA model is capable of providing detailed and accurate insights into the structure of DNA origamis, and has the potential to be used to routinely pre-screen putative origami designs. △ Less

Submitted 22 September, 2018; originally announced September 2018.

Comments: 14 pages, 10 figures

Journal ref: Nucleic Acids Res. 47, 1585-1597 (2019)

Response to the authors of 'On the (un)effectiveness of Proton Boron Capture in Proton Therapy'

Authors: GAP Cirrone, G Cuttone, L Manti, D. Margarone, G Petringa, L. Giuffrida, A. Minopoli, A. Picciotto, G. Russo, F. Cammarata, P. Pisciotta, F. M. Perozziello, F. Romano, V. Marchese, G. Milluzzo, V. Scuderi, G. Cuttone, G. Korn

Abstract: This manuscript provides a response to a recent report by Mazzone et al. available online on arXiv that, in turn, tentatively aims at demonstrating the inefficacy of proton boron capture in hadrotherapy. We clarify that Mazzone et al. do not add any scientific or technical insights to the points extensively discussed in the original manuscript by Cirrone et al., and/or in the series of iterations… ▽ More This manuscript provides a response to a recent report by Mazzone et al. available online on arXiv that, in turn, tentatively aims at demonstrating the inefficacy of proton boron capture in hadrotherapy. We clarify that Mazzone et al. do not add any scientific or technical insights to the points extensively discussed in the original manuscript by Cirrone et al., and/or in the series of iterations had with the Referee, which ultimately lead to the publication of our original and pioneering experimental work. Here we summarize some of the key points of the long scientific debate we had during the review process of paper by Cirrone et al., which are very similar to the considerations presented by Mazzone et al.. In conclusion, no quantitative explanation of our robust experimental achievements presented in Cirrone et al. is provided in Mazzone et al. △ Less

Submitted 9 March, 2018; originally announced March 2018.

Comments: Response to the paper arXiv:1802.09482v2

Geant4 simulation of the ELIMED transport and dosimetry beam line for high-energy laser-driven ion beam multidisciplinary applications

Authors: G. Milluzzo, J. Pipek, A. G. Amico, G. A. P. Cirrone, G. Cuttone, G. Korn, G. Larosa, R. Leanza, D. Margarone, G. Petringa, A. Russo, F. Schillaci, V. Scuderi, F. Romano

Abstract: The ELIMED (MEDical and multidisciplinary application at ELI Beamlines) beam line is being developed at INFN-LNS with the aim of transporting and selecting in energy proton and ion beams accelerated by laser-matter interaction at ELI Beamlines in Prague. It will be a section of the ELIMAIA (ELI Multidisciplinary Applications of laser-Ions Acceleration) beam line, dedicated to applications, includi… ▽ More The ELIMED (MEDical and multidisciplinary application at ELI Beamlines) beam line is being developed at INFN-LNS with the aim of transporting and selecting in energy proton and ion beams accelerated by laser-matter interaction at ELI Beamlines in Prague. It will be a section of the ELIMAIA (ELI Multidisciplinary Applications of laser-Ions Acceleration) beam line, dedicated to applications, including the medical one, of laser-accelerated ion beams [1,2]. A Monte Carlo model has been developed to support the design of the beam line in terms of particle transport efficiency, to optimize the transport parameters at the irradiation point in air and, furthermore, to predict beam parameters in order to deliver dose distributions of clinical relevance. The application has been developed using the Geant4 [3] Monte Carlo toolkit and has been designed in a modular way in order to easily switch on/off geometrical components according to different experimental setups and users requirements, as reported in [4], describing the early-stage code and simulations. The application has been delivered to ELI Beamlines and will be available for future ELIMAIA's users as ready-to-use tool useful during experiment preparation and analysis. The final version of the developed application will be described in detail in this contribution, together with the final results, in terms of energy spectra and transmission efficiency along the in-vacuum beam line, obtained by performing end-to-end simulations. △ Less

Submitted 11 February, 2018; originally announced February 2018.

Comments: EAAC 2017 proceeding NIM A

PANDORA a New Facility for Interdisciplinary In-Plasma Physics

Authors: D. Mascali, A. Musumarra, F. Leone, F. P. Romano, A. Galatà, S. Gammino, C. Massimi

Abstract: PANDORA, Plasmas for Astrophysics, Nuclear Decays Observation and Radiation for Archaeometry, is planned as a new facility based on a state-of-the-art plasma trap confining energetic plasma for performing interdisciplinary research in the fields of Nuclear Astrophysics, Astrophysics, Plasma Physics and Applications in Material Science and Archaeometry: the plasmas become the environment for measur… ▽ More PANDORA, Plasmas for Astrophysics, Nuclear Decays Observation and Radiation for Archaeometry, is planned as a new facility based on a state-of-the-art plasma trap confining energetic plasma for performing interdisciplinary research in the fields of Nuclear Astrophysics, Astrophysics, Plasma Physics and Applications in Material Science and Archaeometry: the plasmas become the environment for measuring nuclear decays rates in stellar-like condition (such as 7Be decay and beta-decay involved in s-process nucleosynthesis), especially as a function of the ionization state of the plasma ions. These studies are of paramount importance for addressing several astrophysical issues in both stellar and primordial nucleosynthesis environment (e.g. determination of solar neutrino flux and 7Li Cosmological Problem), moreover the confined energetic plasma will be a unique light source for high performance stellar spectroscopy measurements in the visible, UV and X-ray domains, offering advancements in observational astronomy. As to magnetic fields, the experimental validation of theoretical first and second order Landé factors will drive the layout of next generation polarimetric units for the high resolution spectrograph of the future giant telescopes. In PANDORA new plasma heating methods will be explored, that will push forward the ion beam output, in terms of extracted intensity and charge states. More, advanced and optimized injection methods of ions in an ECR plasma will be experimented, with the aim at optimizing its capture efficiency. This will be applied to the ECR-based Charge Breeding technique, that will improve the performances of the SPES ISOL-facility currently installed at Laboratori Nazionali di Legnaro-INFN. Finally, PANDORA will be suitable for energy conversion, making the plasma as a source of electromagnetic radiation, for applications in Material Science and Archaeometry. △ Less

Submitted 1 March, 2017; originally announced March 2017.

Nuclear fusion enhances cancer cell killing efficacy in a protontherapy model

Authors: GAP Cirrone, L Manti, D Margarone, L Giuffrida, A. Picciotto, G. Cuttone, G. Korn, V. Marchese, G. Milluzzo, G. Petringa, F. Perozziello, F. Romano, V. Scuderi

Abstract: Protontherapy is hadrontherapy fastest-growing modality and a pillar in the battle against cancer. Hadrontherapy superiority lies in its inverted depth-dose profile, hence tumour-confined irradiation. Protons, however, lack distinct radiobiological advantages over photons or electrons. Higher LET (Linear Energy Transfer) $^{12}$C ions can overcome cancer radioresistance: DNA lesion complexity incr… ▽ More Protontherapy is hadrontherapy fastest-growing modality and a pillar in the battle against cancer. Hadrontherapy superiority lies in its inverted depth-dose profile, hence tumour-confined irradiation. Protons, however, lack distinct radiobiological advantages over photons or electrons. Higher LET (Linear Energy Transfer) $^{12}$C ions can overcome cancer radioresistance: DNA lesion complexity increases with LET, resulting in efficient cell killing, i.e. higher Relative Biological Effectiveness (RBE). However, economic and radiobiological issues hamper $^{12}$C-ion clinical amenability. Thus, enhancing proton RBE is desirable. To this end, we exploited the p + $^{11}$B $\rightarrow$3$α$ reaction to generate high-LET alpha particles with a clinical proton beam. To maximize the reaction rate, we used sodium borocaptate (BSH) with natural boron content. Boron-Neutron Capture Therapy (BNCT) uses $^{10}$B-enriched BSH for neutron irradiation-triggered alpha-particles. We recorded significantly increased cellular lethality and chromosome aberration complexity. A strategy combining protontherapy ballistic precision with the higher RBE promised by BNCT and $^{12}$C-ion therapy is thus demonstrated. △ Less

Submitted 25 January, 2017; originally announced January 2017.

Comments: Original paper on a significative improvement of proton radiobiological effect

Tracking Particles in Flows near Invariant Manifolds via Balance Functions

Authors: Christian Kuehn, Francesco Romano, Hendrik C. Kuhlmann

Abstract: Particles moving inside a fluid near, and interacting with, invariant manifolds is a common phenomenon in a wide variety of applications. One elementary question is whether we can determine once a particle has entered a neighbourhood of an invariant manifold, when it leaves again. Here we approach this problem mathematically by introducing balance functions, which relate the entry and exit points… ▽ More Particles moving inside a fluid near, and interacting with, invariant manifolds is a common phenomenon in a wide variety of applications. One elementary question is whether we can determine once a particle has entered a neighbourhood of an invariant manifold, when it leaves again. Here we approach this problem mathematically by introducing balance functions, which relate the entry and exit points of a particle by an integral variational formula. We define, study, and compare different natural choices for balance functions and conclude that an efficient compromise is to employ normal infinitesimal Lyapunov exponents. We apply our results to two different model flows: a regularized solid-body rotational flow and the asymmetric Kuhlmann--Muldoon model developed in the context of liquid bridges. Furthermore, we employ full numerical simulations of the Navier-Stokes equations of a two-way coupled particle in a shear--stress-driven cavity to test balance functions for a particle moving near an invariant wall. In conclusion, our theoretically-developed framework seems to be applicable to models as well as data to understand particle motion near invariant manifolds. △ Less

Submitted 31 August, 2016; originally announced August 2016.

Journal ref: Nonlinear Dynamics, Vol. 92, No. 3, pp. 983-1000, 2018

Self-assembly of two-dimensional binary quasicrystals: A possible route to a DNA quasicrystal

Authors: Aleks Reinhardt, John S. Schreck, Flavio Romano, Jonathan P. K. Doye

Abstract: We use Monte Carlo simulations and free-energy techniques to show that binary solutions of penta- and hexavalent two-dimensional patchy particles can form thermodynamically stable quasicrystals even at very narrow patch widths, provided their patch interactions are chosen in an appropriate way. Such patchy particles can be thought of as a coarse-grained representation of DNA multi-arm `star' motif… ▽ More We use Monte Carlo simulations and free-energy techniques to show that binary solutions of penta- and hexavalent two-dimensional patchy particles can form thermodynamically stable quasicrystals even at very narrow patch widths, provided their patch interactions are chosen in an appropriate way. Such patchy particles can be thought of as a coarse-grained representation of DNA multi-arm `star' motifs, which can be chosen to bond with one another very specifically by tuning the DNA sequences of the protruding arms. We explore several possible design strategies and conclude that DNA star tiles that are designed to interact with one another in a specific but not overly constrained way could potentially be used to construct soft quasicrystals in experiment. We verify that such star tiles can form stable dodecagonal motifs using oxDNA, a realistic coarse-grained model of DNA. △ Less

Submitted 22 July, 2016; originally announced July 2016.

Journal ref: J. Phys.: Condens. Matter 29, 014006 (2017)

Introducing Improved Structural Properties and Salt Dependence into a Coarse-Grained Model of DNA

Authors: Benedict E. K. Snodin, Ferdinando Randisi, Majid Mosayebi, Petr Sulc, John S. Schreck, Flavio Romano, Thomas E. Ouldridge, Roman Tsukanov, Eyal Nir, Ard A. Louis, Jonathan P. K. Doye

Abstract: We introduce an extended version of oxDNA, a coarse-grained model of DNA designed to capture the thermodynamic, structural and mechanical properties of single- and double-stranded DNA. By including explicit major and minor grooves, and by slightly modifying the coaxial stacking and backbone-backbone interactions, we improve the ability of the model to treat large (kilobase-pair) structures such as… ▽ More We introduce an extended version of oxDNA, a coarse-grained model of DNA designed to capture the thermodynamic, structural and mechanical properties of single- and double-stranded DNA. By including explicit major and minor grooves, and by slightly modifying the coaxial stacking and backbone-backbone interactions, we improve the ability of the model to treat large (kilobase-pair) structures such as DNA origami which are sensitive to these geometric features. Further, we extend the model, which was previously parameterised to just one salt concentration ([Na$^+$]=0.5M), so that it can be used for a range of salt concentrations including those corresponding to physiological conditions. Finally, we use new experimental data to parameterise the oxDNA potential so that consecutive adenine bases stack with a different strength to consecutive thymine bases, a feature which allows a more accurate treatment of systems where the flexibility of single-stranded regions is important. We illustrate the new possibilities opened up by the updated model, oxDNA2, by presenting results from simulations of the structure of large DNA objects and by using the model to investigate some salt-dependent properties of DNA. △ Less

Submitted 19 May, 2015; v1 submitted 3 April, 2015; originally announced April 2015.

Journal ref: J. Chem. Phys. 142, 234901 (2015)

Characterizing the bending and flexibility induced by bulges in DNA duplexes

Authors: John S. Schreck, Thomas E. Ouldridge, Flavio Romano, Ard A. Louis, Jonathan P. K. Doye

Abstract: Advances in DNA nanotechnology have stimulated the search for simple motifs that can be used to control the properties of DNA nanostructures. One such motif, which has been used extensively in structures such as polyhedral cages, two-dimensional arrays, and ribbons, is a bulged duplex, that is two helical segments that connect at a bulge loop. We use a coarse-grained model of DNA to characterize s… ▽ More Advances in DNA nanotechnology have stimulated the search for simple motifs that can be used to control the properties of DNA nanostructures. One such motif, which has been used extensively in structures such as polyhedral cages, two-dimensional arrays, and ribbons, is a bulged duplex, that is two helical segments that connect at a bulge loop. We use a coarse-grained model of DNA to characterize such bulged duplexes. We find that this motif can adopt structures belonging to two main classes: one where the stacking of the helices at the center of the system is preserved, the geometry is roughly straight and the bulge is on one side of the duplex, and the other where the stacking at the center is broken, thus allowing this junction to act as a hinge and increasing flexibility. Small loops favor states where stacking at the center of the duplex is preserved, with loop bases either flipped out or incorporated into the duplex. Duplexes with longer loops show more of a tendency to unstack at the bulge and adopt an open structure. The unstacking probability, however, is highest for loops of intermediate lengths, when the rigidity of single-stranded DNA is significant and the loop resists compression. The properties of this basic structural motif clearly correlate with the structural behavior of certain nano-scale objects, where the enhanced flexibility associated with larger bulges has been used to tune the self-assembly product as well as the detailed geometry of the resulting nanostructures. △ Less

Submitted 19 December, 2014; originally announced December 2014.

Comments: 12 pages + 4 pages of supplemental materials

Journal ref: J. Chem. Phys. 142, 165101 (2015)

Modelling toehold-mediated RNA strand displacement

Authors: Petr Šulc, Thomas E. Ouldridge, Flavio Romano, Jonathan P. K. Doye, Ard A. Louis

Abstract: We study the thermodynamics and kinetics of an RNA toehold-mediated strand displacement reaction with a recently developed coarse-grained model of RNA. Strand displacement, during which a single strand displaces a different strand previously bound to a complementary substrate strand, is an essential mechanism in active nucleic acid nanotechnology and has also been hypothesized to occur in vivo. We… ▽ More We study the thermodynamics and kinetics of an RNA toehold-mediated strand displacement reaction with a recently developed coarse-grained model of RNA. Strand displacement, during which a single strand displaces a different strand previously bound to a complementary substrate strand, is an essential mechanism in active nucleic acid nanotechnology and has also been hypothesized to occur in vivo. We study the rate of displacement reactions as a function of the length of the toehold and temperature and make two experimentally testable predictions: that the displacement is faster if the toehold is placed at the 5' end of the substrate and that the displacement slows down with increasing temperature for longer toeholds. △ Less

Submitted 12 November, 2014; originally announced November 2014.

Journal ref: Biophysical Journal , Volume 108 , Issue 5 , 1238 - 1247, 2015

The role of loop stacking in the dynamics of DNA hairpin formation

Authors: Majid Mosayebi, Flavio Romano, Thomas E. Ouldridge, Ard A. Louis, Jonathan P. K. Doye

Abstract: We study the dynamics of DNA hairpin formation using oxDNA, a nucleotide-level coarse-grained model of DNA. In particular, we explore the effects of the loop stacking interactions and non-native base pairing on the hairpin closing times. We find a non-monotonic variation of the hairpin closing time with temperature, in agreement with the experimental work of Wallace et al. [Proc. Nat. Acad. Sci. U… ▽ More We study the dynamics of DNA hairpin formation using oxDNA, a nucleotide-level coarse-grained model of DNA. In particular, we explore the effects of the loop stacking interactions and non-native base pairing on the hairpin closing times. We find a non-monotonic variation of the hairpin closing time with temperature, in agreement with the experimental work of Wallace et al. [Proc. Nat. Acad. Sci. USA 2001, 98, 5584-5589]. The hairpin closing process involves the formation of an initial nucleus of one or two bonds between the stems followed by a rapid zippering of the stem. At high temperatures, typically above the hairpin melting temperature, an effective negative activation enthalpy is observed because the nucleus has a lower enthalpy than the open state. By contrast, at low temperatures, the activation enthalpy becomes positive mainly due to the increasing energetic cost of bending a loop that becomes increasingly highly stacked as the temperature decreases. We show that stacking must be very strong to induce this experimentally observed behavior, and that the existence of just a few weak stacking points along the loop can substantially suppress it. Non-native base pairs are observed to have only a small effect, slightly accelerating hairpin formation. △ Less

Submitted 5 October, 2014; originally announced October 2014.

Comments: 24 pages, 9 figures

Journal ref: J. Phys. Chem. B, 2014, 118 (49), 14326-14335

DNA hairpins primarily promote duplex melting rather than inhibiting hybridization

Authors: John S. Schreck, Thomas E. Ouldridge, Flavio Romano, Petr Sulc, Liam Shaw, Ard A. Louis, Jonathan P. K. Doye

Abstract: The effect of secondary structure on DNA duplex formation is poorly understood. We use a coarse-grained model of DNA to show that specific 3- and 4-base pair hairpins reduce hybridization rates by factors of 2 and 10 respectively, in good agreement with experiment. By contrast, melting rates are accelerated by factors of ~100 and ~2000. This surprisingly large speed-up occurs because hairpins form… ▽ More The effect of secondary structure on DNA duplex formation is poorly understood. We use a coarse-grained model of DNA to show that specific 3- and 4-base pair hairpins reduce hybridization rates by factors of 2 and 10 respectively, in good agreement with experiment. By contrast, melting rates are accelerated by factors of ~100 and ~2000. This surprisingly large speed-up occurs because hairpins form during the melting process, stabilizing partially melted states, and facilitating dissociation. These results may help guide the design of DNA devices that use hairpins to modulate hybridization and dissociation pathways and rates. △ Less

Submitted 19 August, 2014; originally announced August 2014.

Comments: 5 pages + 14 pages of appendices

Journal ref: Nucl. Acids Res. 43, 6181-6190 (2015)

A nucleotide-level coarse-grained model of RNA

Authors: Petr Šulc, Flavio Romano, Thomas E. Ouldridge, Jonathan P. K. Doye, Ard A. Louis

Abstract: We present a new, nucleotide-level model for RNA, oxRNA, based on the coarse-graining methodology recently developed for the oxDNA model of DNA. The model is designed to reproduce structural, mechanical and thermodynamic properties of RNA, and the coarse-graining level aims to retain the relevant physics for RNA hybridization and the structure of single- and double-stranded RNA. In order to explor… ▽ More We present a new, nucleotide-level model for RNA, oxRNA, based on the coarse-graining methodology recently developed for the oxDNA model of DNA. The model is designed to reproduce structural, mechanical and thermodynamic properties of RNA, and the coarse-graining level aims to retain the relevant physics for RNA hybridization and the structure of single- and double-stranded RNA. In order to explore its strengths and weaknesses, we test the model in a range of nanotechnological and biological settings. Applications explored include the folding thermodynamics of a pseudoknot, the formation of a kissing loop complex, the structure of a hexagonal RNA nanoring, and the unzip** of a hairpin motif. We argue that the model can be used for efficient simulations of the structure of systems with thousands of base pairs, and for the assembly of systems of up to hundreds of base pairs. The source code implementing the model is released for public use. △ Less

Submitted 17 March, 2014; originally announced March 2014.

Comments: 25 pages

Journal ref: J. Chem. Phys. 140, 235102 (2014)

A comparison between parallelization approaches in molecular dynamics simulations on GPUs

Authors: Lorenzo Rovigatti, Petr Šulc, István Z. Reguly, Flavio Romano

Abstract: We test the performances of two different approaches to the computation of forces for molecular dynamics simulations on Graphics Processing Units. A "vertex-based" approach, where a computing thread is started per particle, is compared to a newly proposed "edge-based" approach, where a thread is started per each potentially non-zero interaction. We find that the former is more efficient for system… ▽ More We test the performances of two different approaches to the computation of forces for molecular dynamics simulations on Graphics Processing Units. A "vertex-based" approach, where a computing thread is started per particle, is compared to a newly proposed "edge-based" approach, where a thread is started per each potentially non-zero interaction. We find that the former is more efficient for systems with many simple interactions per particle, while the latter is more efficient if the system has more complicated interactions or fewer of them. By comparing computation times on more and less recent GPU technology, we predict that, if the current trend of increasing the number of processing cores - as opposed to their computing power - remains, the "edge-based" approach will gradually become the most efficient choice in an increasing number of cases. △ Less

Submitted 30 September, 2014; v1 submitted 17 January, 2014; originally announced January 2014.

Comments: 10 pages, 6 figures

Coarse-graining DNA for simulations of DNA nanotechnology

Authors: Jonathan P. K. Doye, Thomas E. Ouldridge, Ard A. Louis, Flavio Romano, Petr Sulc, Christian Matek, Benedict E. K. Snodin, Lorenzo Rovigatti, John S. Schreck, Ryan M. Harrison, William P. J. Smith

Abstract: To simulate long time and length scale processes involving DNA it is necessary to use a coarse-grained description. Here we provide an overview of different approaches to such coarse graining, focussing on those at the nucleotide level that allow the self-assembly processes associated with DNA nanotechnology to be studied. OxDNA, our recently-developed coarse-grained DNA model, is particularly sui… ▽ More To simulate long time and length scale processes involving DNA it is necessary to use a coarse-grained description. Here we provide an overview of different approaches to such coarse graining, focussing on those at the nucleotide level that allow the self-assembly processes associated with DNA nanotechnology to be studied. OxDNA, our recently-developed coarse-grained DNA model, is particularly suited to this task, and has opened up this field to systematic study by simulations. We illustrate some of the range of DNA nanotechnology systems to which the model is being applied, as well as the insights it can provide into fundamental biophysical properties of DNA. △ Less

Submitted 18 August, 2013; originally announced August 2013.

Comments: 20 pages, 9 figures

Journal ref: Phys. Chem. Chem. Phys. 15, 20395-20414 (2013)

Computing phase diagrams for a quasicrystal-forming patchy-particle system

Authors: Aleks Reinhardt, Flavio Romano, Jonathan P. K. Doye

Abstract: We introduce an approach to computing the free energy of quasicrystals, which we use to calculate phase diagrams for systems of two-dimensional patchy particles with five regularly arranged patches that have previously been shown to form dodecagonal quasicrystals. We find that the quasicrystal is a thermodynamically stable phase for a wide range of conditions and remains a robust feature of the sy… ▽ More We introduce an approach to computing the free energy of quasicrystals, which we use to calculate phase diagrams for systems of two-dimensional patchy particles with five regularly arranged patches that have previously been shown to form dodecagonal quasicrystals. We find that the quasicrystal is a thermodynamically stable phase for a wide range of conditions and remains a robust feature of the system as the potential's parameters are varied. We also demonstrate that the quasicrystal is entropically stabilised over its crystalline approximants. △ Less

Submitted 8 April, 2013; v1 submitted 11 February, 2013; originally announced February 2013.

Journal ref: Phys. Rev. Lett. 110, 255503 (2013)

Simulating a burnt-bridges DNA motor with a coarse-grained DNA model

Authors: Petr Šulc, Thomas E. Ouldridge, Flavio Romano, Jonathan P. K. Doye, Ard A. Louis

Abstract: We apply a recently-developed coarse-grained model of DNA, designed to capture the basic physics of nanotechnological DNA systems, to the study of a `burnt-bridges' DNA motor consisting of a single-stranded cargo that steps processively along a track of single-stranded stators. We demonstrate that the model is able to simulate such a system, and investigate the sensitivity of the step** process… ▽ More We apply a recently-developed coarse-grained model of DNA, designed to capture the basic physics of nanotechnological DNA systems, to the study of a `burnt-bridges' DNA motor consisting of a single-stranded cargo that steps processively along a track of single-stranded stators. We demonstrate that the model is able to simulate such a system, and investigate the sensitivity of the step** process to the spatial separation of stators, finding that an increased distance can suppress successful steps due to the build up of unfavourable tension. The mechanism of suppression suggests that varying the distance between stators could be used as a method for improving signal-to-noise ratios for motors that are required to make a decision at a junction of stators. △ Less

Submitted 18 December, 2012; originally announced December 2012.

Comments: 12 pages

Journal ref: Natural Computing, 13, 535-547 (2014)

Coarse-grained simulations of DNA overstretching

Authors: Flavio Romano, Debayan Chakraborty, Jonathan P. K. Doye, Thomas E. Ouldridge, Ard. A. Louis

Abstract: We use a recently developed coarse-grained model to simulate the overstretching of duplex DNA. Overstretching at 23C occurs at 74 pN in the model, about 6-7 pN higher than the experimental value at equivalent salt conditions. Furthermore, the model reproduces the temperature dependence of the overstretching force well. The mechanism of overstretching is always force-induced melting by unpeeling fr… ▽ More We use a recently developed coarse-grained model to simulate the overstretching of duplex DNA. Overstretching at 23C occurs at 74 pN in the model, about 6-7 pN higher than the experimental value at equivalent salt conditions. Furthermore, the model reproduces the temperature dependence of the overstretching force well. The mechanism of overstretching is always force-induced melting by unpeeling from the free ends. That we never see S-DNA (overstretched duplex DNA), even though there is clear experimental evidence for this mode of overstretching under certain conditions, suggests that S-DNA is not simply an unstacked but hydrogen-bonded duplex, but instead probably has a more exotic structure. △ Less

Submitted 29 January, 2013; v1 submitted 26 September, 2012; originally announced September 2012.

Comments: 11 pages, 11 figures

Journal ref: J. Chem. Phys. 138, 085101 (2013)

Sequence-dependent thermodynamics of a coarse-grained DNA model

Authors: Petr Šulc, Flavio Romano, Thomas E. Ouldridge, Lorenzo Rovigatti, Jonathan P. K. Doye, Ard A. Louis

Abstract: We introduce a sequence-dependent parametrization for a coarse-grained DNA model [T. E. Ouldridge, A. A. Louis, and J. P. K. Doye, J. Chem. Phys. 134, 085101 (2011)] originally designed to reproduce the properties of DNA molecules with average sequences. The new parametrization introduces sequence-dependent stacking and base-pairing interaction strengths chosen to reproduce the melting temperature… ▽ More We introduce a sequence-dependent parametrization for a coarse-grained DNA model [T. E. Ouldridge, A. A. Louis, and J. P. K. Doye, J. Chem. Phys. 134, 085101 (2011)] originally designed to reproduce the properties of DNA molecules with average sequences. The new parametrization introduces sequence-dependent stacking and base-pairing interaction strengths chosen to reproduce the melting temperatures of short duplexes. By develo** a histogram reweighting technique, we are able to fit our parameters to the melting temperatures of thousands of sequences. To demonstrate the flexibility of the model, we study the effects of sequence on: (a) the heterogeneous stacking transition of single strands, (b) the tendency of a duplex to fray at its melting point, (c) the effects of stacking strength in the loop on the melting temperature of hairpins, (d) the force-extension properties of single strands and (e) the structure of a kissing-loop complex. Where possible we compare our results with experimental data and find a good agreement. A simulation code called oxDNA, implementing our model, is available as free software. △ Less

Submitted 14 July, 2012; originally announced July 2012.

Comments: 15 pages

Journal ref: J. Chem. Phys. 137, 135101 (2012)

Charged particle's flux measurement from PMMA irradiated by 80 MeV/u carbon ion beam

Authors: C. Agodi, G. Battistoni, F. Bellini, G. A. P. Cirrone, F. Collamati, G. Cuttone, E. De Lucia, M. De Napoli, A. Di Domenico, R. Faccini, F. Ferroni, S. Fiore, P. Gauzzi, E. Iarocci, M. Marafini, I. Mattei, S. Muraro, A. Paoloni, V. Patera, L. Piersanti, F. Romano, A. Sarti, A. Sciubba, E. Vitale, C. Voena

Abstract: Hadrontherapy is an emerging technique in cancer therapy that uses beams of charged particles. To meet the improved capability of hadrontherapy in matching the dose release with the cancer position, new dose monitoring techniques need to be developed and introduced into clinical use. The measurement of the fluxes of the secondary particles produced by the hadron beam is of fundamental importance i… ▽ More Hadrontherapy is an emerging technique in cancer therapy that uses beams of charged particles. To meet the improved capability of hadrontherapy in matching the dose release with the cancer position, new dose monitoring techniques need to be developed and introduced into clinical use. The measurement of the fluxes of the secondary particles produced by the hadron beam is of fundamental importance in the design of any dose monitoring device and is eagerly needed to tune Monte Carlo simulations. We report the measurements done with charged secondary particles produced from the interaction of a 80 MeV/u fully stripped carbon ion beam at the INFN Laboratori Nazionali del Sud, Catania, with a Poly-methyl methacrylate target. Charged secondary particles, produced at 90$\degree$ with respect to the beam axis, have been tracked with a drift chamber, while their energy and time of flight has been measured by means of a LYSO scintillator. Secondary protons have been identified exploiting the energy and time of flight information, and their emission region has been reconstructed backtracking from the drift chamber to the target. Moreover a position scan of the target indicates that the reconstructed emission region follows the movement of the expected Bragg peak position. Exploting the reconstruction of the emission region, an accuracy on the Bragg peak determination in the submillimeter range has been obtained. The measured differential production rate for protons produced with $E^{\rm Prod}_{\rm kin} >$ 83 MeV and emitted at 90$\degree$ with respect to the beam line is: $dN_{\rm P}/(dN_{\rm C}dΩ)(E^{\rm Prod}_{\rm kin} > 83 {\rm ~MeV}, θ=90\degree)= (2.69\pm 0.08_{\rm stat} \pm 0.12_{\rm sys})\times 10^{-4} sr^{-1}$. △ Less

Submitted 21 March, 2012; originally announced March 2012.

Comments: 13 pages, 9 figures

Journal ref: Phys. Med. Biol. 57 (2012) 5667

The effect of topology on the structure and free energy landscape of DNA kissing complexes

Authors: Flavio Romano, Alex Hudson, Jonathan P. K. Doye, Thomas E. Ouldridge, Ard A. Louis

Abstract: We use a recently developed coarse-grained model for DNA to study kissing complexes formed by hybridization of complementary hairpin loops. The binding of the loops is topologically constrained because their linking number must remain constant. By studying systems with linking numbers -1, 0 or 1 we show that the average number of interstrand base pairs is larger when the topology is more favourabl… ▽ More We use a recently developed coarse-grained model for DNA to study kissing complexes formed by hybridization of complementary hairpin loops. The binding of the loops is topologically constrained because their linking number must remain constant. By studying systems with linking numbers -1, 0 or 1 we show that the average number of interstrand base pairs is larger when the topology is more favourable for the right-handed wrap** of strands around each other. The thermodynamic stability of the kissing complex also decreases when the linking number changes from -1 to 0 to 1. The structures of the kissing complexes typically involve two intermolecular helices that coaxially stack with the hairpin stems at a parallel four-way junction. △ Less

Submitted 15 March, 2012; originally announced March 2012.

Journal ref: J. Chem. Phys. 136, 215102 (2012)

Fluid-Fluid and Fluid-Solid transitions in the Kern-Frenkel model from Barker-Henderson thermodynamic perturbation theory

Authors: Christoph Gögelein, Flavio Romano, Francesco Sciortino, Achille Giacometti

Abstract: We study the Kern-Frenkel model for patchy colloids using Barker-Henderson second-order thermodynamic perturbation theory. The model describes a fluid where hard sphere particles are decorated with one patch, so that they interact via a square-well (SW) potential if they are sufficiently close one another, and if patches on each particle are properly aligned. Both the gas-liquid and fluid-solid ph… ▽ More We study the Kern-Frenkel model for patchy colloids using Barker-Henderson second-order thermodynamic perturbation theory. The model describes a fluid where hard sphere particles are decorated with one patch, so that they interact via a square-well (SW) potential if they are sufficiently close one another, and if patches on each particle are properly aligned. Both the gas-liquid and fluid-solid phase coexistences are computed and contrasted against corresponding Monte-Carlo simulations results. We find that the perturbation theory describes rather accurately numerical simulations all the way from a fully covered square-well potential down to the Janus limit (half coverage). In the region where numerical data are not available (from Janus to hard-spheres), the method provides estimates of the location of the critical lines that could serve as a guideline for further efficient numerical work at these low coverages. A comparison with other techniques, such as integral equation theory, highlights the important aspect of this methodology in the present context. △ Less

Submitted 8 February, 2012; originally announced February 2012.

Comments: Accepted for publication in The Journal of Chemical Physics (2012)

Journal ref: The Journal of Chemical Physics 136: 094512, 2012

Study of the time and space distribution of beta+ emitters from 80 MeV/u carbon ion beam irradiation on PMMA

Authors: C. Agodi, F. Bellini, G. A. P. Cirrone, F. Collamati, G. Cuttone, E. De Lucia, M. De Napoli, A. Di Domenico, R. Faccini, F. Ferroni, S. Fiore, P. Gauzzi, E. Iarocci, M. Marafini, I. Mattei, A. Paoloni, V. Patera, L. Piersanti, F. Romano, A. Sarti, A. Sciubba, C. Voena

Abstract: Proton and carbon ion therapy is an emerging technique used for the treatment of solid cancers. The monitoring of the dose delivered during such treatments and the on-line knowledge of the Bragg peak position is still a matter of research. A possible technique exploits the collinear $511\ \kilo\electronvolt$ photons produced by positrons annihilation from $β^+$ emitters created by the beam. This p… ▽ More Proton and carbon ion therapy is an emerging technique used for the treatment of solid cancers. The monitoring of the dose delivered during such treatments and the on-line knowledge of the Bragg peak position is still a matter of research. A possible technique exploits the collinear $511\ \kilo\electronvolt$ photons produced by positrons annihilation from $β^+$ emitters created by the beam. This paper reports rate measurements of the $511\ \kilo\electronvolt$ photons emitted after the interactions of a $80\ \mega\electronvolt / u$ fully stripped carbon ion beam at the Laboratori Nazionali del Sud (LNS) of INFN, with a Poly-methyl methacrylate target. The time evolution of the $β^+$ rate was parametrized and the dominance of $^{11}C$ emitters over the other species ($^{13}N$, $^{15}O$, $^{14}O$) was observed, measuring the fraction of carbon ions activating $β^+$ emitters $A_0=(10.3\pm0.7)\cdot10^{-3}$. The average depth in the PMMA of the positron annihilation from $β^+$ emitters was also measured, $D_{β^+}=5.3\pm1.1\ \milli\meter$, to be compared to the expected Bragg peak depth $D_{Bragg}=11.0\pm 0.5\ \milli\meter$ obtained from simulations. △ Less

Submitted 27 April, 2012; v1 submitted 8 February, 2012; originally announced February 2012.

Report number: NIMB58752

Precise measurement of prompt photon emission for carbon ion therapy

Authors: C. Agodi, F. Bellini, G. A. P. Cirrone, F. Collamati, G. Cuttone, E. De Lucia, M. De Napoli, A. Di Domenico, R. Faccini, F. Ferroni, S. Fiore, P. Gauzzi, E. Iarocci, M. Marafini, I. Mattei, A. Paoloni, V. Patera, L. Piersanti, F. Romano, A. Sarti, A. Sciubba, C. Voena

Abstract: Proton and carbon ion therapy is an emerging technique used for the treatment of solid cancers. The monitoring of the dose delivered during such treatments is still a matter of research. A possible technique exploits the information provided by single photon emission from nuclear decays induced by the irradiation. This paper reports the measurements of the spectrum and rate of such photons produce… ▽ More Proton and carbon ion therapy is an emerging technique used for the treatment of solid cancers. The monitoring of the dose delivered during such treatments is still a matter of research. A possible technique exploits the information provided by single photon emission from nuclear decays induced by the irradiation. This paper reports the measurements of the spectrum and rate of such photons produced from the interaction of a 80 MeV/u fully stripped carbon ion beam at the Laboratori Nazionali del Sud of INFN, Catania, with a Poly-methyl methacrylate target. The differential production rate for photons with energy E > 2 MeV and emitted at 90 degree is found to be $dN_γ/(dN_C dΩ)=(2.92\pm 0.19)\times 10^{-2}$sr$^{-1}$. △ Less

Submitted 17 October, 2011; originally announced October 2011.

Report number: P03001

Journal ref: 2012 JINST 7

Sensitivity and environmental response of the CMS RPC gas gain monitoring system

Authors: L. Benussi, S. Bianco, S. Colafranceschi, F. L. Fabbri, M. Giardoni, B. Ortenzi, A. Paolozzi, L. Passamonti, D. Pierluigi, B. Ponzio, A. Russo, A. Colaleo, F. Loddo, M. Maggi, A. Ranieri, M. Abbrescia, G. Iaselli, B. Marangelli, S. Natali, S. Nuzzo, G. Pugliese, F. Romano, G. Roselli, R. Trentadue, S. Tupputi , et al. (13 additional authors not shown)

Abstract: Results from the gas gain monitoring (GGM) system for the muon detector using RPC in the CMS experiment at the LHC is presented. The system is designed to provide fast and accurate determination of any shift in the working point of the chambers due to gas mixture changes. Results from the gas gain monitoring (GGM) system for the muon detector using RPC in the CMS experiment at the LHC is presented. The system is designed to provide fast and accurate determination of any shift in the working point of the chambers due to gas mixture changes. △ Less

Submitted 9 December, 2008; originally announced December 2008.

Comments: 8 pages, 7 figures, uses lnfprepCMS.sty, presented by S. Colafranceschi at IEEE 08 Dresden (Germany) November 2008

Report number: Frascati Preprint LNF - 08 / 27(P)

Journal ref: JINST 4:P08006,2009

The CMS RPC gas gain monitoring system: an overview and preliminary results

Authors: L. Benussi, S. Bianco, S. Colafranceschi, D. Colonna, L. Daniello, F. L. Fabbri, M. Giardoni, B. Ortenzi, A. Paolozzi, L. Passamonti, D. Pierluigi, B. Ponzio, C. Pucci, A. Russo, G. Roselli, A. Colaleo, F. Loddo, M. Maggi, A. Ranieri, M. Abbrescia, G. Iaselli, B. Marangelli, S. Natali, S. Nuzzo, G. Pugliese , et al. (18 additional authors not shown)

Abstract: The status of the CMS RPC Gas Gain Monitoring (GGM) system developed at the Frascati Laboratory of INFN (Istituto Nazionale di Fisica Nucleare) is reported on. The GGM system is a cosmic ray telescope based on small RPC detectors operated with the same gas mixture used by the CMS RPC system. The GGM gain and efficiency are continuously monitored on-line, thus providing a fast and accurate determ… ▽ More The status of the CMS RPC Gas Gain Monitoring (GGM) system developed at the Frascati Laboratory of INFN (Istituto Nazionale di Fisica Nucleare) is reported on. The GGM system is a cosmic ray telescope based on small RPC detectors operated with the same gas mixture used by the CMS RPC system. The GGM gain and efficiency are continuously monitored on-line, thus providing a fast and accurate determination of any shift in working point conditions. The construction details and the first result of GGM commissioning are described. △ Less

Submitted 5 December, 2008; originally announced December 2008.

Comments: 8 pages, 9 figures, uses lnfprepCMS.sty, presented by L. Benussi at RPC07, Mumbai, INDIA 2008

Report number: Frascati PrePrint LNF-08/29(P)

Journal ref: Nucl.Instrum.Meth.A602:805-808,2009