-
A demonstrator for a real-time AI-FPGA-based triggering system for sPHENIX at RHIC
Authors:
J. Kvapil,
G. Borca-Tasciuc,
H. Bossi,
K. Chen,
Y. Chen,
Y. Corrales Morales,
H. Da Costa,
C. Da Silva,
C. Dean,
J. Durham,
S. Fu,
C. Hao,
P. Harris,
O. Hen,
H. Jheng,
Y. Lee,
P. Li,
X. Li,
Y. Lin,
M. X. Liu,
A. Olvera,
M. L. Purschke,
M. Rigatti,
G. Roland,
J. Schambach
, et al. (6 additional authors not shown)
Abstract:
The RHIC interaction rate at sPHENIX will reach around 3 MHz in pp collisions and requires the detector readout to reject events by a factor of over 200 to fit the DAQ bandwidth of 15 kHz. Some critical measurements, such as heavy flavor production in pp collisions, often require the analysis of particles produced at low momentum. This prohibits adopting the traditional approach, where data rates…
▽ More
The RHIC interaction rate at sPHENIX will reach around 3 MHz in pp collisions and requires the detector readout to reject events by a factor of over 200 to fit the DAQ bandwidth of 15 kHz. Some critical measurements, such as heavy flavor production in pp collisions, often require the analysis of particles produced at low momentum. This prohibits adopting the traditional approach, where data rates are reduced through triggering on rare high momentum probes. We explore a new approach based on real-time AI technology, adopt an FPGA-based implementation using a custom designed FELIX-712 board with the Xilinx Kintex Ultrascale FPGA, and deploy the system in the detector readout electronics loop for real-time trigger decision.
△ Less
Submitted 27 December, 2023; v1 submitted 22 December, 2023;
originally announced December 2023.
-
Climate Change and Future Food Security: Predicting the Extent of Cropland Gain or Degradation
Authors:
Tanushkina Daria,
Shevchenko Valeriy,
Lukashevich Aleksander,
Bulkin Aleksandr,
Grinis Roland,
Kovalev Kirill,
Narozhnaia Veronika,
Sotiriadi Nazar,
Krenke Alexander,
Maximov Yury
Abstract:
Agriculture is crucial in sustaining human life and civilization that relies heavily on natural resources. This industry faces new challenges, such as climate change, a growing global population, and new models for managing food security and water resources. Through a machine learning framework, we estimate the future productivity of croplands based on CMIP5 climate projections on moderate carbon…
▽ More
Agriculture is crucial in sustaining human life and civilization that relies heavily on natural resources. This industry faces new challenges, such as climate change, a growing global population, and new models for managing food security and water resources. Through a machine learning framework, we estimate the future productivity of croplands based on CMIP5 climate projections on moderate carbon emission scenario. We demonstrate that Vietnam and Thailand are at risk with a 10\% and 14\% drop in rice production, respectively, whereas the Philippines is expected to increase its output by 11\% by 2026 compared with 2018. We urge proactive international collaboration between regions facing crop land gain and degradation to mitigate the climate change and population growth impacts reducing our society's vulnerability. Our study provides critical information on the effects of climate change and human activities on land productivity and uses that may assist such collaboration.
△ Less
Submitted 26 November, 2023; v1 submitted 4 October, 2023;
originally announced October 2023.
-
Design of the ECCE Detector for the Electron Ion Collider
Authors:
J. K. Adkins,
Y. Akiba,
A. Albataineh,
M. Amaryan,
I. C. Arsene,
C. Ayerbe Gayoso,
J. Bae,
X. Bai,
M. D. Baker,
M. Bashkanov,
R. Bellwied,
F. Benmokhtar,
V. Berdnikov,
J. C. Bernauer,
F. Bock,
W. Boeglin,
M. Borysova,
E. Brash,
P. Brindza,
W. J. Briscoe,
M. Brooks,
S. Bueltmann,
M. H. S. Bukhari,
A. Bylinkin,
R. Capobianco
, et al. (259 additional authors not shown)
Abstract:
The EIC Comprehensive Chromodynamics Experiment (ECCE) detector has been designed to address the full scope of the proposed Electron Ion Collider (EIC) physics program as presented by the National Academy of Science and provide a deeper understanding of the quark-gluon structure of matter. To accomplish this, the ECCE detector offers nearly acceptance and energy coverage along with excellent track…
▽ More
The EIC Comprehensive Chromodynamics Experiment (ECCE) detector has been designed to address the full scope of the proposed Electron Ion Collider (EIC) physics program as presented by the National Academy of Science and provide a deeper understanding of the quark-gluon structure of matter. To accomplish this, the ECCE detector offers nearly acceptance and energy coverage along with excellent tracking and particle identification. The ECCE detector was designed to be built within the budget envelope set out by the EIC project while simultaneously managing cost and schedule risks. This detector concept has been selected to be the basis for the EIC project detector.
△ Less
Submitted 11 May, 2023; v1 submitted 6 September, 2022;
originally announced September 2022.
-
Detector Requirements and Simulation Results for the EIC Exclusive, Diffractive and Tagging Physics Program using the ECCE Detector Concept
Authors:
A. Bylinkin,
C. T. Dean,
S. Fegan,
D. Gangadharan,
K. Gates,
S. J. D. Kay,
I. Korover,
W. B. Li,
X. Li,
R. Montgomery,
D. Nguyen,
G. Penman,
J. R. Pybus,
N. Santiesteban,
R. Trotta,
A. Usman,
M. D. Baker,
J. Frantz,
D. I. Glazier,
D. W. Higinbotham,
T. Horn,
J. Huang,
G. Huber,
R. Reed,
J. Roche
, et al. (258 additional authors not shown)
Abstract:
This article presents a collection of simulation studies using the ECCE detector concept in the context of the EIC's exclusive, diffractive, and tagging physics program, which aims to further explore the rich quark-gluon structure of nucleons and nuclei. To successfully execute the program, ECCE proposed to utilize the detecter system close to the beamline to ensure exclusivity and tag ion beam/fr…
▽ More
This article presents a collection of simulation studies using the ECCE detector concept in the context of the EIC's exclusive, diffractive, and tagging physics program, which aims to further explore the rich quark-gluon structure of nucleons and nuclei. To successfully execute the program, ECCE proposed to utilize the detecter system close to the beamline to ensure exclusivity and tag ion beam/fragments for a particular reaction of interest. Preliminary studies confirmed the proposed technology and design satisfy the requirements. The projected physics impact results are based on the projected detector performance from the simulation at 10 or 100 fb^-1 of integrated luminosity. Additionally, a few insights on the potential 2nd Interaction Region can (IR) were also documented which could serve as a guidepost for the future development of a second EIC detector.
△ Less
Submitted 6 March, 2023; v1 submitted 30 August, 2022;
originally announced August 2022.
-
Open Heavy Flavor Studies for the ECCE Detector at the Electron Ion Collider
Authors:
X. Li,
J. K. Adkins,
Y. Akiba,
A. Albataineh,
M. Amaryan,
I. C. Arsene,
C. Ayerbe Gayoso,
J. Bae,
X. Bai,
M. D. Baker,
M. Bashkanov,
R. Bellwied,
F. Benmokhtar,
V. Berdnikov,
J. C. Bernauer,
F. Bock,
W. Boeglin,
M. Borysova,
E. Brash,
P. Brindza,
W. J. Briscoe,
M. Brooks,
S. Bueltmann,
M. H. S. Bukhari,
A. Bylinkin
, et al. (262 additional authors not shown)
Abstract:
The ECCE detector has been recommended as the selected reference detector for the future Electron-Ion Collider (EIC). A series of simulation studies have been carried out to validate the physics feasibility of the ECCE detector. In this paper, detailed studies of heavy flavor hadron and jet reconstruction and physics projections with the ECCE detector performance and different magnet options will…
▽ More
The ECCE detector has been recommended as the selected reference detector for the future Electron-Ion Collider (EIC). A series of simulation studies have been carried out to validate the physics feasibility of the ECCE detector. In this paper, detailed studies of heavy flavor hadron and jet reconstruction and physics projections with the ECCE detector performance and different magnet options will be presented. The ECCE detector has enabled precise EIC heavy flavor hadron and jet measurements with a broad kinematic coverage. These proposed heavy flavor measurements will help systematically study the hadronization process in vacuum and nuclear medium especially in the underexplored kinematic region.
△ Less
Submitted 23 July, 2022; v1 submitted 21 July, 2022;
originally announced July 2022.
-
Exclusive J/$ψ$ Detection and Physics with ECCE
Authors:
X. Li,
J. K. Adkins,
Y. Akiba,
A. Albataineh,
M. Amaryan,
I. C. Arsene,
C. Ayerbe Gayoso,
J. Bae,
X. Bai,
M. D. Baker,
M. Bashkanov,
R. Bellwied,
F. Benmokhtar,
V. Berdnikov,
J. C. Bernauer,
F. Bock,
W. Boeglin,
M. Borysova,
E. Brash,
P. Brindza,
W. J. Briscoe,
M. Brooks,
S. Bueltmann,
M. H. S. Bukhari,
A. Bylinkin
, et al. (262 additional authors not shown)
Abstract:
Exclusive heavy quarkonium photoproduction is one of the most popular processes in EIC, which has a large cross section and a simple final state. Due to the gluonic nature of the exchange Pomeron, this process can be related to the gluon distributions in the nucleus. The momentum transfer dependence of this process is sensitive to the interaction sites, which provides a powerful tool to probe the…
▽ More
Exclusive heavy quarkonium photoproduction is one of the most popular processes in EIC, which has a large cross section and a simple final state. Due to the gluonic nature of the exchange Pomeron, this process can be related to the gluon distributions in the nucleus. The momentum transfer dependence of this process is sensitive to the interaction sites, which provides a powerful tool to probe the spatial distribution of gluons in the nucleus. Recently the problem of the origin of hadron mass has received lots of attention in determining the anomaly contribution $M_{a}$. The trace anomaly is sensitive to the gluon condensate, and exclusive production of quarkonia such as J/$ψ$ and $Υ$ can serve as a sensitive probe to constrain it. In this paper, we present the performance of the ECCE detector for exclusive J/$ψ$ detection and the capability of this process to investigate the above physics opportunities with ECCE.
△ Less
Submitted 21 July, 2022;
originally announced July 2022.
-
Design and Simulated Performance of Calorimetry Systems for the ECCE Detector at the Electron Ion Collider
Authors:
F. Bock,
N. Schmidt,
P. K. Wang,
N. Santiesteban,
T. Horn,
J. Huang,
J. Lajoie,
C. Munoz Camacho,
J. K. Adkins,
Y. Akiba,
A. Albataineh,
M. Amaryan,
I. C. Arsene,
C. Ayerbe Gayoso,
J. Bae,
X. Bai,
M. D. Baker,
M. Bashkanov,
R. Bellwied,
F. Benmokhtar,
V. Berdnikov,
J. C. Bernauer,
W. Boeglin,
M. Borysova,
E. Brash
, et al. (263 additional authors not shown)
Abstract:
We describe the design and performance the calorimeter systems used in the ECCE detector design to achieve the overall performance specifications cost-effectively with careful consideration of appropriate technical and schedule risks. The calorimeter systems consist of three electromagnetic calorimeters, covering the combined pseudorapdity range from -3.7 to 3.8 and two hadronic calorimeters. Key…
▽ More
We describe the design and performance the calorimeter systems used in the ECCE detector design to achieve the overall performance specifications cost-effectively with careful consideration of appropriate technical and schedule risks. The calorimeter systems consist of three electromagnetic calorimeters, covering the combined pseudorapdity range from -3.7 to 3.8 and two hadronic calorimeters. Key calorimeter performances which include energy and position resolutions, reconstruction efficiency, and particle identification will be presented.
△ Less
Submitted 19 July, 2022;
originally announced July 2022.
-
AI-assisted Optimization of the ECCE Tracking System at the Electron Ion Collider
Authors:
C. Fanelli,
Z. Papandreou,
K. Suresh,
J. K. Adkins,
Y. Akiba,
A. Albataineh,
M. Amaryan,
I. C. Arsene,
C. Ayerbe Gayoso,
J. Bae,
X. Bai,
M. D. Baker,
M. Bashkanov,
R. Bellwied,
F. Benmokhtar,
V. Berdnikov,
J. C. Bernauer,
F. Bock,
W. Boeglin,
M. Borysova,
E. Brash,
P. Brindza,
W. J. Briscoe,
M. Brooks,
S. Bueltmann
, et al. (258 additional authors not shown)
Abstract:
The Electron-Ion Collider (EIC) is a cutting-edge accelerator facility that will study the nature of the "glue" that binds the building blocks of the visible matter in the universe. The proposed experiment will be realized at Brookhaven National Laboratory in approximately 10 years from now, with detector design and R&D currently ongoing. Notably, EIC is one of the first large-scale facilities to…
▽ More
The Electron-Ion Collider (EIC) is a cutting-edge accelerator facility that will study the nature of the "glue" that binds the building blocks of the visible matter in the universe. The proposed experiment will be realized at Brookhaven National Laboratory in approximately 10 years from now, with detector design and R&D currently ongoing. Notably, EIC is one of the first large-scale facilities to leverage Artificial Intelligence (AI) already starting from the design and R&D phases. The EIC Comprehensive Chromodynamics Experiment (ECCE) is a consortium that proposed a detector design based on a 1.5T solenoid. The EIC detector proposal review concluded that the ECCE design will serve as the reference design for an EIC detector. Herein we describe a comprehensive optimization of the ECCE tracker using AI. The work required a complex parametrization of the simulated detector system. Our approach dealt with an optimization problem in a multidimensional design space driven by multiple objectives that encode the detector performance, while satisfying several mechanical constraints. We describe our strategy and show results obtained for the ECCE tracking system. The AI-assisted design is agnostic to the simulation framework and can be extended to other sub-detectors or to a system of sub-detectors to further optimize the performance of the EIC detector.
△ Less
Submitted 19 May, 2022; v1 submitted 18 May, 2022;
originally announced May 2022.
-
Scientific Computing Plan for the ECCE Detector at the Electron Ion Collider
Authors:
J. C. Bernauer,
C. T. Dean,
C. Fanelli,
J. Huang,
K. Kauder,
D. Lawrence,
J. D. Osborn,
C. Paus,
J. K. Adkins,
Y. Akiba,
A. Albataineh,
M. Amaryan,
I. C. Arsene,
C. Ayerbe Gayoso,
J. Bae,
X. Bai,
M. D. Baker,
M. Bashkanov,
R. Bellwied,
F. Benmokhtar,
V. Berdnikov,
F. Bock,
W. Boeglin,
M. Borysova,
E. Brash
, et al. (256 additional authors not shown)
Abstract:
The Electron Ion Collider (EIC) is the next generation of precision QCD facility to be built at Brookhaven National Laboratory in conjunction with Thomas Jefferson National Laboratory. There are a significant number of software and computing challenges that need to be overcome at the EIC. During the EIC detector proposal development period, the ECCE consortium began identifying and addressing thes…
▽ More
The Electron Ion Collider (EIC) is the next generation of precision QCD facility to be built at Brookhaven National Laboratory in conjunction with Thomas Jefferson National Laboratory. There are a significant number of software and computing challenges that need to be overcome at the EIC. During the EIC detector proposal development period, the ECCE consortium began identifying and addressing these challenges in the process of producing a complete detector proposal based upon detailed detector and physics simulations. In this document, the software and computing efforts to produce this proposal are discussed; furthermore, the computing and software model and resources required for the future of ECCE are described.
△ Less
Submitted 17 May, 2022;
originally announced May 2022.
-
Improved non-linear devices for quantum applications
Authors:
Jano Gil-Lopez,
Matteo Santandrea,
Benjamin Brecht,
Ganaël Roland,
Raimund Ricken,
Viktor Quiring,
Christine Silberhorn
Abstract:
In this paper, we review the state of the art of mode selective, integrated sum-frequency generation devices tailored for quantum optical technologies. We explore benchmarks to asses their performance and discuss the current limitations of these devices, outlining possible strategies to overcome them. Finally, we present the fabrication of a new, improved device and its characterization. We analys…
▽ More
In this paper, we review the state of the art of mode selective, integrated sum-frequency generation devices tailored for quantum optical technologies. We explore benchmarks to asses their performance and discuss the current limitations of these devices, outlining possible strategies to overcome them. Finally, we present the fabrication of a new, improved device and its characterization. We analyse the fabrication quality of this device and discuss the next steps towards improved non-linear devices for quantum applications.
△ Less
Submitted 1 March, 2021;
originally announced March 2021.
-
An interferometric method for determining the losses of spatially multi-mode nonlinear waveguides based on second harmonic generation
Authors:
Matteo Santandrea,
Michael Stefszky,
Ganaël Roeland,
Christine Silberhorn
Abstract:
The characterisation of loss in optical waveguides is essential in understanding the performance of these devices and their limitations. Whilst interferometric-based methods generally provide the best results for low-loss waveguides, they are almost exclusively used to provide characterization in cases where the waveguide is spatially single-mode. Here, we introduce a Fabry-Pérot-based scheme to e…
▽ More
The characterisation of loss in optical waveguides is essential in understanding the performance of these devices and their limitations. Whilst interferometric-based methods generally provide the best results for low-loss waveguides, they are almost exclusively used to provide characterization in cases where the waveguide is spatially single-mode. Here, we introduce a Fabry-Pérot-based scheme to estimate the losses of a nonlinear (birefringent or quasi-phase matched) waveguide at a wavelength where it is multi-mode. The method involves measuring the generated second harmonic power as the pump wavelength is scanned over the phasematching region. Furthermore, it is shown that this method allows one to infer the losses of different second harmonic spatial modes by scanning the pump field over the separated phase matching spectra. By fitting the measured phasematching spectra from a titanium indiffused lithium niobate waveguide sample to the model presented in this paper, it is shown that one can estimate the second harmonic losses of a single spatial-mode, at wavelengths where the waveguides are spatially multi-mode.
△ Less
Submitted 17 October, 2019; v1 submitted 16 October, 2019;
originally announced October 2019.
-
Characterisation of Inhomogeneities in Ti:LiNbO$_3$ waveguides
Authors:
Matteo Santandrea,
Michael Stefszky,
Ganaël Roeland,
Christine Silberhorn
Abstract:
Nonlinear processes in integrated, guiding systems are fundamental for both classical and quantum experiments. Integrated components allow for compact, modular and stable light-processing systems and as such their use in real-world systems continues to expand. In order to use these devices in the most demanding applications, where efficiency and/or spectral performance are critical, it is importan…
▽ More
Nonlinear processes in integrated, guiding systems are fundamental for both classical and quantum experiments. Integrated components allow for compact, modular and stable light-processing systems and as such their use in real-world systems continues to expand. In order to use these devices in the most demanding applications, where efficiency and/or spectral performance are critical, it is important that the devices are fully optimized. In order to achieve these optimizations, it is first necessary to gain a thorough understanding of current fabrication limits and their impact on the devices final performance. In this paper we investigate the current fabrication limits of titanium in-diffused lithium niobate waveguides produced using a masked photolithographic method. By dicing a long (~cm) sample into smaller pieces and recording the resulting phasematching spectra, the fabrication error present in the UV photolithographic process is characterized. The retrieved imperfections fit well with theoretical expectations and from the measured imperfection profile it is shown that one can directly reconstruct the original distorted phasematching spectrum. Therefore, our measurements directly quantify the intrinsic limitations of the current standard UV photolitographic technique for the realization of integrated waveguides in lithium niobate.
△ Less
Submitted 24 June, 2019;
originally announced June 2019.
-
The PROOF Distributed Parallel Analysis Framework based on ROOT
Authors:
Maarten Ballintijn,
Rene Brun,
Fons Rademakers,
Gunther Roland
Abstract:
The development of the Parallel ROOT Facility, PROOF, enables a physicist to analyze and understand much larger data sets on a shorter time scale. It makes use of the inherent parallelism in event data and implements an architecture that optimizes I/O and CPU utilization in heterogeneous clusters with distributed storage. The system provides transparent and interactive access to gigabytes today.…
▽ More
The development of the Parallel ROOT Facility, PROOF, enables a physicist to analyze and understand much larger data sets on a shorter time scale. It makes use of the inherent parallelism in event data and implements an architecture that optimizes I/O and CPU utilization in heterogeneous clusters with distributed storage. The system provides transparent and interactive access to gigabytes today. Being part of the ROOT framework PROOF inherits the benefits of a performant object storage system and a wealth of statistical and visualization tools. This paper describes the key principles of the PROOF architecture and the implementation of the system. We will illustrate its features using a simple example and present measurements of the scalability of the system. Finally we will discuss how PROOF can be interfaced and make use of the different Grid solutions.
△ Less
Submitted 13 June, 2003;
originally announced June 2003.