-
Transverse Emittance Reduction in Muon Beams by Ionization Cooling
Authors:
The MICE Collaboration,
M. Bogomilov,
R. Tsenov,
G. Vankova-Kirilova,
Y. P. Song,
J. Y. Tang,
Z. H. Li,
R. Bertoni,
M. Bonesini,
F. Chignoli,
R. Mazza,
A. de Bari,
D. Orestano,
L. Tortora,
Y. Kuno,
H. Sakamoto,
A. Sato,
S. Ishimoto,
M. Chung,
C. K. Sung,
F. Filthaut,
M. Fedorov,
D. Jokovic,
D. Maletic,
M. Savic
, et al. (112 additional authors not shown)
Abstract:
Accelerated muon beams have been considered for next-generation studies of high-energy lepton-antilepton collisions and neutrino oscillations. However, high-brightness muon beams have not yet been produced. The main challenge for muon acceleration and storage stems from the large phase-space volume occupied by the beam, derived from the muon production mechanism through the decay of pions from pro…
▽ More
Accelerated muon beams have been considered for next-generation studies of high-energy lepton-antilepton collisions and neutrino oscillations. However, high-brightness muon beams have not yet been produced. The main challenge for muon acceleration and storage stems from the large phase-space volume occupied by the beam, derived from the muon production mechanism through the decay of pions from proton collisions. Ionization cooling is the technique proposed to decrease the muon beam phase-space volume. Here we demonstrate a clear signal of ionization cooling through the observation of transverse emittance reduction in beams that traverse lithium hydride or liquid hydrogen absorbers in the Muon Ionization Cooling Experiment (MICE). The measurement is well reproduced by the simulation of the experiment and the theoretical model. The results shown here represent a substantial advance towards the realization of muon-based facilities that could operate at the energy and intensity frontiers.
△ Less
Submitted 13 October, 2023; v1 submitted 9 October, 2023;
originally announced October 2023.
-
Workshop on a future muon program at FNAL
Authors:
S. Corrodi,
Y. Oksuzian,
A. Edmonds,
J. Miller,
H. N. Tran,
R. Bonventre,
D. N. Brown,
F. Meot,
V. Singh,
Y. Kolomensky,
S. Tripathy,
L. Borrel,
M. Bub,
B. Echenard,
D. G. Hitlin,
H. Jafree,
S. Middleton,
R. Plestid,
F. C. Porter,
R. Y. Zhu,
L. Bottura,
E. Pinsard,
A. M. Teixeira,
C. Carelli,
D. Ambrose
, et al. (68 additional authors not shown)
Abstract:
The Snowmass report on rare processes and precision measurements recommended Mu2e-II and a next generation muon facility at Fermilab (Advanced Muon Facility) as priorities for the frontier. The Workshop on a future muon program at FNAL was held in March 2023 to discuss design studies for Mu2e-II, organizing efforts for the next generation muon facility, and identify synergies with other efforts (e…
▽ More
The Snowmass report on rare processes and precision measurements recommended Mu2e-II and a next generation muon facility at Fermilab (Advanced Muon Facility) as priorities for the frontier. The Workshop on a future muon program at FNAL was held in March 2023 to discuss design studies for Mu2e-II, organizing efforts for the next generation muon facility, and identify synergies with other efforts (e.g., muon collider). Topics included high-power targetry, status of R&D for Mu2e-II, development of compressor rings, FFA and concepts for muon experiments (conversion, decays, muonium and other opportunities) at AMF. This document summarizes the workshop discussions with a focus on future R&D tasks needed to realize these concepts.
△ Less
Submitted 11 September, 2023;
originally announced September 2023.
-
Towards a Muon Collider
Authors:
Carlotta Accettura,
Dean Adams,
Rohit Agarwal,
Claudia Ahdida,
Chiara Aimè,
Nicola Amapane,
David Amorim,
Paolo Andreetto,
Fabio Anulli,
Robert Appleby,
Artur Apresyan,
Aram Apyan,
Sergey Arsenyev,
Pouya Asadi,
Mohammed Attia Mahmoud,
Aleksandr Azatov,
John Back,
Lorenzo Balconi,
Laura Bandiera,
Roger Barlow,
Nazar Bartosik,
Emanuela Barzi,
Fabian Batsch,
Matteo Bauce,
J. Scott Berg
, et al. (272 additional authors not shown)
Abstract:
A muon collider would enable the big jump ahead in energy reach that is needed for a fruitful exploration of fundamental interactions. The challenges of producing muon collisions at high luminosity and 10 TeV centre of mass energy are being investigated by the recently-formed International Muon Collider Collaboration. This Review summarises the status and the recent advances on muon colliders desi…
▽ More
A muon collider would enable the big jump ahead in energy reach that is needed for a fruitful exploration of fundamental interactions. The challenges of producing muon collisions at high luminosity and 10 TeV centre of mass energy are being investigated by the recently-formed International Muon Collider Collaboration. This Review summarises the status and the recent advances on muon colliders design, physics and detector studies. The aim is to provide a global perspective of the field and to outline directions for future work.
△ Less
Submitted 27 November, 2023; v1 submitted 15 March, 2023;
originally announced March 2023.
-
Computational Models for High-Power Cyclotrons and FFAs
Authors:
Andreas Adelmann,
Chris T. Rogers
Abstract:
A summary of numerical modeling capabilities regarding high power cyclotrons and fixed field alternating gradient machines is presented. This paper focuses on techniques made available by the OPAL simulation code.
A summary of numerical modeling capabilities regarding high power cyclotrons and fixed field alternating gradient machines is presented. This paper focuses on techniques made available by the OPAL simulation code.
△ Less
Submitted 4 January, 2023;
originally announced January 2023.
-
Multiple Coulomb Scattering of muons in Lithium Hydride
Authors:
M. Bogomilov,
R. Tsenov,
G. Vankova-Kirilova,
Y. P. Song,
J. Y. Tang,
Z. H. Li,
R. Bertoni,
M. Bonesini,
F. Chignoli,
R. Mazza,
V. Palladino,
A. de Bari,
D. Orestano,
L. Tortora,
Y. Kuno,
H. Sakamoto,
A. Sato,
S. Ishimoto,
M. Chung,
C. K. Sung,
F. Filthaut,
M. Fedorov,
D. Jokovic,
D. Maletic,
M. Savic
, et al. (112 additional authors not shown)
Abstract:
Multiple Coulomb Scattering (MCS) is a well known phenomenon occurring when charged particles traverse materials. Measurements of muons traversing low $Z$ materials made in the MuScat experiment showed that theoretical models and simulation codes, such as GEANT4 (v7.0), over-estimated the scattering. The Muon Ionization Cooling Experiment (MICE) measured the cooling of a muon beam traversing a liq…
▽ More
Multiple Coulomb Scattering (MCS) is a well known phenomenon occurring when charged particles traverse materials. Measurements of muons traversing low $Z$ materials made in the MuScat experiment showed that theoretical models and simulation codes, such as GEANT4 (v7.0), over-estimated the scattering. The Muon Ionization Cooling Experiment (MICE) measured the cooling of a muon beam traversing a liquid hydrogen or lithium hydride (LiH) energy absorber as part of a programme to develop muon accelerator facilities, such as a Neutrino Factory or a Muon Collider. The energy loss and MCS that occur in the absorber material are competing effects that alter the performance of the cooling channel. Therefore measurements of MCS are required in order to validate the simulations used to predict the cooling performance in future accelerator facilities. We report measurements made in the MICE apparatus of MCS using a LiH absorber and muons within the momentum range 160 to 245 MeV/c. The measured RMS scattering width is about 9% smaller than that predicted by the approximate formula proposed by the Particle Data Group. Data at 172, 200 and 240 MeV/c are compared to the GEANT4 (v9.6) default scattering model. These measurements show agreement with this more recent GEANT4 (v9.6) version over the range of incident muon momenta.
△ Less
Submitted 21 September, 2022;
originally announced September 2022.
-
A self-governing, self-regulating system for assessing scientific predictive power
Authors:
Ted C. Rogers
Abstract:
I propose a method for tracking and assessing scientific progress using a prediction consensus algorithm designed for the purpose. The protocol obviates the need for centralized referees to generate scientific questions, gather predictions, and assess the accuracy or success of those predictions. It relies instead on crowd wisdom and a system of checks and balances for all tasks. It is intended to…
▽ More
I propose a method for tracking and assessing scientific progress using a prediction consensus algorithm designed for the purpose. The protocol obviates the need for centralized referees to generate scientific questions, gather predictions, and assess the accuracy or success of those predictions. It relies instead on crowd wisdom and a system of checks and balances for all tasks. It is intended to take the form of a web-based, searchable database. I describe a prototype implementation that I call Ex Quaerum. The main purpose of the present document is to motivate the project, to explain its underlying philosophy, to explain the details of the consensus protocol on which it is based, to describe plans for its future development, and ultimately to attract additional collaborators.
△ Less
Submitted 9 May, 2022;
originally announced May 2022.
-
Novel Materials and Concepts for Next-Generation High Power Target Applications
Authors:
Kavin Ammigan,
Sujit Bidhar,
Frederique Pellemoine,
Vitaly Pronskikh,
David Pushka,
Katsuya Yonehara,
Robert Zwaska,
Adrien Couet,
Michael Moorehead,
Taku Ishida,
Shunsuke Makimura,
Christopher Densham,
Michael Fitton,
Eric Harvey-Fishenden,
Tristan Davenne,
David Jenkins,
Peter Loveridge,
Joe O'Dell,
Chris Rogers,
Dan Wilcox,
Marco Calviani,
Simone Gilardoni,
Francois-Xavier Nuiry,
Antonio Perillo-Marcone,
Nathan Bultman
, et al. (14 additional authors not shown)
Abstract:
Novel beam-intercepting materials and targetry concepts are essential to improve the performance, reliability and operation lifetimes of next generation multi-megawatt (multi-MW) accelerator target facilities. The beam-intercepting materials and components must sustain an order-of-magnitude increase in particle beam intensities and are beyond the current state-of-the-art. With conventional materia…
▽ More
Novel beam-intercepting materials and targetry concepts are essential to improve the performance, reliability and operation lifetimes of next generation multi-megawatt (multi-MW) accelerator target facilities. The beam-intercepting materials and components must sustain an order-of-magnitude increase in particle beam intensities and are beyond the current state-of-the-art. With conventional materials already limiting the scope of experiments, it is crucial to investigate novel target materials, technologies and concepts that will satisfy the requirements and maximize the physics benefits of future energy and intensity frontier experiments. This paper provides an overview of the related targetry R&D required over the next 10 years to support and enable future high-power accelerator target facilities.
△ Less
Submitted 15 March, 2022;
originally announced March 2022.
-
A Muon Collider Facility for Physics Discovery
Authors:
D. Stratakis,
N. Mokhov,
M. Palmer,
N. Pastrone,
T. Raubenheimer,
C. Rogers,
D. Schulte,
V. Shiltsev,
J. Tang,
A. Yamamoto,
C. Aimè,
M. A. Mahmoud,
N. Bartosik,
E. Barzi,
A. Bersani,
A. Bertolin,
M. Bonesini,
B. Caiffi,
M. Casarsa,
M. G. Catanesi,
A. Cerri,
C. Curatolo,
M. Dam,
H. Damerau,
E. De Matteis
, et al. (44 additional authors not shown)
Abstract:
Muon colliders provide a unique route to deliver high energy collisions that enable discovery searches and precision measurements to extend our understanding of the fundamental laws of physics. The muon collider design aims to deliver physics reach at the highest energies with costs, power consumption and on a time scale that may prove favorable relative to other proposed facilities. In this conte…
▽ More
Muon colliders provide a unique route to deliver high energy collisions that enable discovery searches and precision measurements to extend our understanding of the fundamental laws of physics. The muon collider design aims to deliver physics reach at the highest energies with costs, power consumption and on a time scale that may prove favorable relative to other proposed facilities. In this context, a new international collaboration has formed to further extend the design concepts and performance studies of such a machine. This effort is focused on delivering the elements of a $\sim$10 TeV center of mass (CM) energy design to explore the physics energy frontier. The path to such a machine may pass through lower energy options. Currently a 3 TeV CM stage is considered. Other energy stages could also be explored, e.g. an s-channel Higgs Factory operating at 125 GeV CM. We describe the status of the R&D and design effort towards such a machine and lay out a plan to bring these concepts to maturity as a tool for the high energy physics community.
△ Less
Submitted 15 March, 2022;
originally announced March 2022.
-
Neutrinos from Stored Muons (nuSTORM)
Authors:
L. Alvarez Ruso,
T. Alves,
S. Boyd,
A. Bross,
P. R. Hobson,
P. Kyberd,
J. B. Lagrange,
K. Long,
X. -G. Lu,
J. Pasternak,
M. Pfaff,
C. Rogers
Abstract:
The 2020 Update of the European Strategy for Particle Physics (ESPP) (see https://cds.cern.ch/record/2720129 ) recommended that muon beam R\&D should be considered a high-priority future initiative and that a programme of experimentation be developed to determine the neutrino cross-sections required to extract the most physics from the DUNE and Hyper-K long-baseline experiments. The ENUBET and nuS…
▽ More
The 2020 Update of the European Strategy for Particle Physics (ESPP) (see https://cds.cern.ch/record/2720129 ) recommended that muon beam R\&D should be considered a high-priority future initiative and that a programme of experimentation be developed to determine the neutrino cross-sections required to extract the most physics from the DUNE and Hyper-K long-baseline experiments. The ENUBET and nuSTORM collaborations have begun to work within and alongside the CERN Physics Beyond Colliders study group and the international Muon Collider collaboration to carry out a joint, five-year R\&D programme to deliver a detailed plan for the implementation of an infrastructure in which:
(1) ENUBET and nuSTORM deliver the neutrino cross-section measurement programme identified in the ESPP and allow sensitive searches for physics beyond the Standard Model to be carried out; and in which \ (2) A 6D muon ionisation cooling experiment is delivered as part of the technology development programme defined by the international Muon Collider collaboration.
This document summarises the status of development of the nuSTORM and 6D cooling experiments and identifies opportunities for collaboration in the development of the initiative outlined above.
△ Less
Submitted 9 August, 2022; v1 submitted 14 March, 2022;
originally announced March 2022.
-
European Strategy for Particle Physics -- Accelerator R&D Roadmap
Authors:
C. Adolphsen,
D. Angal-Kalinin,
T. Arndt,
M. Arnold,
R. Assmann,
B. Auchmann,
K. Aulenbacher,
A. Ballarino,
B. Baudouy,
P. Baudrenghien,
M. Benedikt,
S. Bentvelsen,
A. Blondel,
A. Bogacz,
F. Bossi,
L. Bottura,
S. Bousson,
O. Brüning,
R. Brinkmann,
M. Bruker,
O. Brunner,
P. N. Burrows,
G. Burt,
S. Calatroni,
K. Cassou
, et al. (111 additional authors not shown)
Abstract:
The 2020 update of the European Strategy for Particle Physics emphasised the importance of an intensified and well-coordinated programme of accelerator R&D, supporting the design and delivery of future particle accelerators in a timely, affordable and sustainable way. This report sets out a roadmap for European accelerator R&D for the next five to ten years, covering five topical areas identified…
▽ More
The 2020 update of the European Strategy for Particle Physics emphasised the importance of an intensified and well-coordinated programme of accelerator R&D, supporting the design and delivery of future particle accelerators in a timely, affordable and sustainable way. This report sets out a roadmap for European accelerator R&D for the next five to ten years, covering five topical areas identified in the Strategy update. The R&D objectives include: improvement of the performance and cost-performance of magnet and radio-frequency acceleration systems; investigations of the potential of laser / plasma acceleration and energy-recovery linac techniques; and development of new concepts for muon beams and muon colliders. The goal of the roadmap is to document the collective view of the field on the next steps for the R&D programme, and to provide the evidence base to support subsequent decisions on prioritisation, resourcing and implementation.
△ Less
Submitted 30 March, 2022; v1 submitted 19 January, 2022;
originally announced January 2022.
-
Performance of the MICE diagnostic system
Authors:
The MICE collaboration,
M. Bogomilov,
R. Tsenov,
G. Vankova-Kirilova,
Y. P. Song,
J. Y. Tang,
Z. H. Li,
R. Bertoni,
M. Bonesini,
F. Chignoli,
R. Mazza,
V. Palladino,
A. de Bari,
D. Orestano,
L. Tortora,
Y. Kuno,
H. Sakamoto,
A. Sato,
S. Ishimoto,
M. Chung,
C. K. Sung,
F. Filthaut,
M. Fedorov,
D. Jokovic,
D. Maletic
, et al. (113 additional authors not shown)
Abstract:
Muon beams of low emittance provide the basis for the intense, well-characterised neutrino beams of a neutrino factory and for multi-TeV lepton-antilepton collisions at a muon collider. The international Muon Ionization Cooling Experiment (MICE) has demonstrated the principle of ionization cooling, the technique by which it is proposed to reduce the phase-space volume occupied by the muon beam at…
▽ More
Muon beams of low emittance provide the basis for the intense, well-characterised neutrino beams of a neutrino factory and for multi-TeV lepton-antilepton collisions at a muon collider. The international Muon Ionization Cooling Experiment (MICE) has demonstrated the principle of ionization cooling, the technique by which it is proposed to reduce the phase-space volume occupied by the muon beam at such facilities. This paper documents the performance of the detectors used in MICE to measure the muon-beam parameters, and the physical properties of the liquid hydrogen energy absorber during running.
△ Less
Submitted 16 August, 2021; v1 submitted 10 June, 2021;
originally announced June 2021.
-
Optics Design of Vertical Excursion Fixed-Field Alternating Gradient Accelerators
Authors:
S. Machida,
D. J. Kelliher,
J-B. Lagrange,
C. T. Rogers
Abstract:
Vertical excursion fixed-field alternating gradient accelerators can be designed with tunes that are invariant with respect to momentum and trajectories that are scaled images of each other displaced only in the vertical direction. This is possible using guiding fields that have a vertical exponential increase, with a skew quadrupole component in the magnet body and a solenoid component at the mag…
▽ More
Vertical excursion fixed-field alternating gradient accelerators can be designed with tunes that are invariant with respect to momentum and trajectories that are scaled images of each other displaced only in the vertical direction. This is possible using guiding fields that have a vertical exponential increase, with a skew quadrupole component in the magnet body and a solenoid component at the magnet ends. Because of the coupling this introduces, orbit and optics calculations and optimisation of parameters need to be performed numerically. In this paper, idealised magnetic fields are calculated from first principles, taking into account end fields. The parameter dependence of the optics and the dynamic aperture of the ring are calculated for the example of a ring with an approximately 25 m circumference that accelerates proton beams from 3 MeV to 12 MeV. The paper reports for the first time the design of such an accelerator lattice using tools specifically devised to analyse transverse coupled optics without the need for approximations.
△ Less
Submitted 21 November, 2020;
originally announced November 2020.
-
A universal 3D imaging sensor on a silicon photonics platform
Authors:
Christopher Rogers,
Alexander Y. Piggott,
David J. Thomson,
Robert F. Wiser,
Ion E. Opris,
Steven A. Fortune,
Andrew J. Compston,
Alexander Gondarenko,
Fanfan Meng,
Xia Chen,
Graham T. Reed,
Remus Nicolaescu
Abstract:
Accurate 3D imaging is essential for machines to map and interact with the physical world. While numerous 3D imaging technologies exist, each addressing niche applications with varying degrees of success, none have achieved the breadth of applicability and impact that digital image sensors have achieved in the 2D imaging world. A large-scale two-dimensional array of coherent detector pixels operat…
▽ More
Accurate 3D imaging is essential for machines to map and interact with the physical world. While numerous 3D imaging technologies exist, each addressing niche applications with varying degrees of success, none have achieved the breadth of applicability and impact that digital image sensors have achieved in the 2D imaging world. A large-scale two-dimensional array of coherent detector pixels operating as a light detection and ranging (LiDAR) system could serve as a universal 3D imaging platform. Such a system would offer high depth accuracy and immunity to interference from sunlight, as well as the ability to directly measure the velocity of moving objects. However, due to difficulties in providing electrical and photonic connections to every pixel, previous systems have been restricted to fewer than 20 pixels. Here, we demonstrate the first large-scale coherent detector array consisting of 512 ($32 \times 16$) pixels, and its operation in a 3D imaging system. Leveraging recent advances in the monolithic integration of photonic and electronic circuits, a dense array of optical heterodyne detectors is combined with an integrated electronic readout architecture, enabling straightforward scaling to arbitrarily large arrays. Meanwhile, two-axis solid-state beam steering eliminates any tradeoff between field of view and range. Operating at the quantum noise limit, our system achieves an accuracy of $3.1~\mathrm{mm}$ at a distance of 75 metres using only $4~\mathrm{mW}$ of light, an order of magnitude more accurate than existing solid-state systems at such ranges. Future reductions of pixel size using state-of-the-art components could yield resolutions in excess of 20 megapixels for arrays the size of a consumer camera sensor. This result paves the way for the development and proliferation of low cost, compact, and high performance 3D imaging cameras.
△ Less
Submitted 11 November, 2020; v1 submitted 5 August, 2020;
originally announced August 2020.
-
Controlling the dopant profile for SRH suppression at low current densities in $λ\approx$ 1330nm GaInAsP light-emitting diodes
Authors:
Parthiban Santhanam,
Wei Li,
Bo Zhao,
Chris Rogers,
Dodd Joseph Gray Jr.,
Phillip Jahelka,
Harry A. Atwater,
Shanhui Fan
Abstract:
The quantum efficiency of double hetero-junction light-emitting diodes (LEDs) can be significantly enhanced at low current density by tailoring the spatial profile of dopants to suppress Shockley-Read-Hall (SRH) recombination. To demonstrate this effect we model, design, grow, fabricate, and test a GaInAsP LED ($λ\approx$ 1330nm) with an unconventional dopant profile. Compared against that of our…
▽ More
The quantum efficiency of double hetero-junction light-emitting diodes (LEDs) can be significantly enhanced at low current density by tailoring the spatial profile of dopants to suppress Shockley-Read-Hall (SRH) recombination. To demonstrate this effect we model, design, grow, fabricate, and test a GaInAsP LED ($λ\approx$ 1330nm) with an unconventional dopant profile. Compared against that of our control design, which is a conventional $n^+$-$n$-$p^+$ double hetero-junction LED, the dopant profile near the $n$-$p^+$ hetero-structure of the new design displaces the built-in electric field in such a way as to suppress the J02 space charge recombination current. The design principle generalizes to other material systems and could be applicable to efforts to observe and exploit electro-luminescent refrigeration at practical power densities.
△ Less
Submitted 29 January, 2020;
originally announced January 2020.
-
First demonstration of ionization cooling by the Muon Ionization Cooling Experiment
Authors:
M. Bogomilov,
R. Tsenov,
G. Vankova-Kirilova,
Y. P. Song,
J. Y. Tang,
Z. H. Li,
R. Bertoni,
M. Bonesini,
F. Chignoli,
R. Mazza,
V. Palladino,
A. de Bari,
D. Orestano,
L. Tortora,
Y. Kuno,
H. Sakamoto,
A. Sato,
S. Ishimoto,
M. Chung,
C. K. Sung,
F. Filthaut,
D. Jokovic,
D. Maletic,
M. Savic,
N. Jovancevic
, et al. (110 additional authors not shown)
Abstract:
High-brightness muon beams of energy comparable to those produced by state-of-the-art electron, proton and ion accelerators have yet to be realised. Such beams have the potential to carry the search for new phenomena in lepton-antilepton collisions to extremely high energy and also to provide uniquely well-characterised neutrino beams. A muon beam may be created through the decay of pions produced…
▽ More
High-brightness muon beams of energy comparable to those produced by state-of-the-art electron, proton and ion accelerators have yet to be realised. Such beams have the potential to carry the search for new phenomena in lepton-antilepton collisions to extremely high energy and also to provide uniquely well-characterised neutrino beams. A muon beam may be created through the decay of pions produced in the interaction of a proton beam with a target. To produce a high-brightness beam from such a source requires that the phase space volume occupied by the muons be reduced (cooled). Ionization cooling is the novel technique by which it is proposed to cool the beam. The Muon Ionization Cooling Experiment collaboration has constructed a section of an ionization cooling cell and used it to provide the first demonstration of ionization cooling. We present these ground-breaking measurements.
△ Less
Submitted 19 July, 2019;
originally announced July 2019.
-
OPAL a Versatile Tool for Charged Particle Accelerator Simulations
Authors:
Andreas Adelmann,
Pedro Calvo,
Matthias Frey,
Achim Gsell,
Uldis Locans,
Christof Metzger-Kraus,
Nicole Neveu,
Chris Rogers,
Steve Russell,
Suzanne Sheehy,
Jochem Snuverink,
Daniel Winklehner
Abstract:
Many sophisticated computer models have been developed to understand the behaviour of particle accelerators. Even these complex models often do not describe the measured data. Interactions of the beam with external fields, other particles in the same beam and the beam walls all present modelling challenges. These can be challenging to model correctly even with modern supercomputers. This paper des…
▽ More
Many sophisticated computer models have been developed to understand the behaviour of particle accelerators. Even these complex models often do not describe the measured data. Interactions of the beam with external fields, other particles in the same beam and the beam walls all present modelling challenges. These can be challenging to model correctly even with modern supercomputers. This paper describes OPAL (Object Oriented Parallel Accelerator Library), a parallel open source tool for charged-particle optics in linear accelerators and rings, including 3D space charge. OPAL is built from the ground up as a parallel application exemplifying the fact that high performance computing is the third leg of science, complementing theory and experiment. Using the MAD language with extensions, OPAL can run on a laptop as well as on the largest high performance computing systems. The OPAL framework makes it easy to add new features in the form of new C++ classes, enabling the modelling of many physics processes and field types. OPAL comes in two flavours: OPAL-cycl: tracks particles with 3D space charge including neighbouring turns in cyclotrons and FFAs with time as the independent variable. OPAL-t: models beam lines, linacs, rf-photo injectors and complete XFELs excluding the undulator. The code is managed through the git distributed version control system. A suite of unit tests have been developed for various parts of OPAL, validating each part of the code independently. System tests validate the overall integration of different elements.
△ Less
Submitted 16 May, 2019;
originally announced May 2019.
-
Wall Stress Distributions in Abdominal Aortic Aneurysms Do Not Correlate With Symptoms
Authors:
Karol Miller,
Hozan Mufty,
Alastair Catlin,
Christopher Rogers,
Bradley Saunders,
Ross Sciarrone,
Inge Fourneau,
Bart Meuris,
Angus Tavner,
Grand R. Joldes,
Adam Wittek
Abstract:
Abdominal aortic aneurysm (AAA) is a permanent and irreversible dilation of the lower region of the aorta. It is typically an asymptomatic condition that if left untreated can expand to the point of rupture. Mechanically-speaking, rupture of an artery occurs when the local wall stress exceeds the local wall strength. It is therefore understandable that numerous studies have attempted to estimate t…
▽ More
Abdominal aortic aneurysm (AAA) is a permanent and irreversible dilation of the lower region of the aorta. It is typically an asymptomatic condition that if left untreated can expand to the point of rupture. Mechanically-speaking, rupture of an artery occurs when the local wall stress exceeds the local wall strength. It is therefore understandable that numerous studies have attempted to estimate the AAA wall stress. Recently the Intelligent Systems for Medicine Laboratory (ISML) presented a very efficient method to compute AAA wall stress using geometry from Computed Tomography (CT) images, and median arterial pressure as the applied load. The ISML's method is embedded in the software platform BioPARR - Biomechanics based Prediction of Aneurysm Rupture Risk, freely available from http://bioparr.mech.uwa.edu.au/. The uniqueness of our stress computation approach is three-fold: i) the results are insensitive to unknown patient-specific mechanical properties of arterial wall tissue; ii) the residual stress is accounted for, according to Y.C. Fung's Uniform Stress Hypothesis; and iii) the analysis is automated and quick, making our approach compatible with clinical workflows. In this study we evaluated 19 cases of AAA. A proportion of these were classified as symptomatic. The results of the analysis demonstrate, contrary to the common view, that neither the wall stress magnitude nor the stress distribution correlate with the presence of clinical symptoms.
△ Less
Submitted 15 April, 2019;
originally announced April 2019.
-
Coherent Control of Two-Dimensional Excitons
Authors:
Christopher Rogers,
Dodd Gray Jr.,
Nathan Bogdanowicz,
Takashi Taniguchi,
Kenji Watanabe,
Hideo Mabuchi
Abstract:
Electric dipole radiation can be controlled by coherent optical feedback, as has previously been studied by modulating the photonic environment for point dipoles placed both in optical cavities and near metal mirrors. In experiments involving fluorescent molecules, trapped ions and quantum dots the point nature of the dipole, its sub-unity quantum efficiency, and decoherence rate conspire to sever…
▽ More
Electric dipole radiation can be controlled by coherent optical feedback, as has previously been studied by modulating the photonic environment for point dipoles placed both in optical cavities and near metal mirrors. In experiments involving fluorescent molecules, trapped ions and quantum dots the point nature of the dipole, its sub-unity quantum efficiency, and decoherence rate conspire to severely limit any change in total linewidth. Here we show that the transverse coherence of exciton emission in the monolayer two-dimensional (2D) material MoSe${}_2$ removes many of the fundamental physical limitations present in previous experiments. The coherent interaction between excitons and a photonic mode localized between the MoSe${}_2$ and a nearby planar mirror depends interferometrically on mirror position, enabling full control over the radiative coupling rate from near-zero to 1.8 meV and a corresponding change in exciton total linewidth from 0.9 to 2.3 meV. The highly radiatively broadened exciton resonance (a ratio of up to $3:1$ in our samples) necessary to observe this modulation is made possible by recent advances in 2D materials sample fabrication. Our method of mirror translation is free of any coupling to strain or DC electric field in the monolayer, which allows a fundamental study of this photonic effect. The weak coherent driving field in our experiments yields a mean excitation occupation number of ${\sim} 10^{-3}$ such that our experiments correspond to probing radiative reaction in the regime of perturbative quantum electrodynamics. This system will serve as a testbed for exploring new excitonic physics and quantum nonlinear optical effects.
△ Less
Submitted 13 February, 2019;
originally announced February 2019.
-
MAUS: The MICE Analysis User Software
Authors:
R. Asfandiyarov,
R. Bayes,
V. Blackmore,
M. Bogomilov,
D. Colling,
A. J. Dobbs,
F. Drielsma,
M. Drews,
M. Ellis,
M. Fedorov,
P. Franchini,
R. Gardener,
J. R. Greis,
P. M. Hanlet,
C. Heidt,
C. Hunt,
G. Kafka,
Y. Karadzhov,
A. Kurup,
P. Kyberd,
M. Littlefield,
A. Liu,
K. Long,
D. Maletic,
J. Martyniak
, et al. (21 additional authors not shown)
Abstract:
The Muon Ionization Cooling Experiment (MICE) collaboration has developed the MICE Analysis User Software (MAUS) to simulate and analyze experimental data. It serves as the primary codebase for the experiment, providing for offline batch simulation and reconstruction as well as online data quality checks. The software provides both traditional particle-physics functionalities such as track reconst…
▽ More
The Muon Ionization Cooling Experiment (MICE) collaboration has developed the MICE Analysis User Software (MAUS) to simulate and analyze experimental data. It serves as the primary codebase for the experiment, providing for offline batch simulation and reconstruction as well as online data quality checks. The software provides both traditional particle-physics functionalities such as track reconstruction and particle identification, and accelerator physics functions, such as calculating transfer matrices and emittances. The code design is object orientated, but has a top-level structure based on the Map-Reduce model. This allows for parallelization to support live data reconstruction during data-taking operations. MAUS allows users to develop in either Python or C++ and provides APIs for both. Various software engineering practices from industry are also used to ensure correct and maintainable code, including style, unit and integration tests, continuous integration and load testing, code reviews, and distributed version control. The software framework and the simulation and reconstruction capabilities are described.
△ Less
Submitted 30 July, 2019; v1 submitted 6 December, 2018;
originally announced December 2018.
-
First particle-by-particle measurement of emittance in the Muon Ionization Cooling Experiment
Authors:
The MICE Collaboration,
D. Adams,
D. Adey,
R. Asfandiyarov,
G. Barber,
A. de Bari,
R. Bayes,
V. Bayliss,
R. Bertoni,
V. Blackmore,
A. Blondel,
J. Boehm,
M. Bogomilov,
M. Bonesini,
C. N. Booth,
D. Bowring,
S. Boyd,
T. W. Bradshaw,
A. D. Bross,
C. Brown,
L. Coney,
G. Charnley,
G. T. Chatzitheodoridis,
F. Chignoli,
M. Chung
, et al. (111 additional authors not shown)
Abstract:
The Muon Ionization Cooling Experiment (MICE) collaboration seeks to demonstrate the feasibility of ionization cooling, the technique by which it is proposed to cool the muon beam at a future neutrino factory or muon collider. The emittance is measured from an ensemble of muons assembled from those that pass through the experiment. A pure muon ensemble is selected using a particle-identification s…
▽ More
The Muon Ionization Cooling Experiment (MICE) collaboration seeks to demonstrate the feasibility of ionization cooling, the technique by which it is proposed to cool the muon beam at a future neutrino factory or muon collider. The emittance is measured from an ensemble of muons assembled from those that pass through the experiment. A pure muon ensemble is selected using a particle-identification system that can reject efficiently both pions and electrons. The position and momentum of each muon are measured using a high-precision scintillating-fibre tracker in a 4\,T solenoidal magnetic field. This paper presents the techniques used to reconstruct the phase-space distributions and reports the first particle-by-particle measurement of the emittance of the MICE Muon Beam as a function of muon-beam momentum.
△ Less
Submitted 26 March, 2019; v1 submitted 31 October, 2018;
originally announced October 2018.
-
On Madelung systems in nonlinear optics: A reciprocal invariance
Authors:
Colin Rogers,
Boris Malomed
Abstract:
The role of the de Broglie-Bohm potential, originally established as central to Bohmian quantum mechanics, is examined for two canonical Madelung systems in nonlinear optics. In a seminal case, a Madelung system derived by Wagner et al. via the paraxial approximation and in which the de Broglie-Bohm potential is present, is shown to admit a multi-parameter class of what are here introduced as "q-g…
▽ More
The role of the de Broglie-Bohm potential, originally established as central to Bohmian quantum mechanics, is examined for two canonical Madelung systems in nonlinear optics. In a seminal case, a Madelung system derived by Wagner et al. via the paraxial approximation and in which the de Broglie-Bohm potential is present, is shown to admit a multi-parameter class of what are here introduced as "q-gaussons". In the limit as the Tsallis parameter q --> 1, the q-gaussons are shown to lead to standard gausson solitons as admitted by logarithmic nonlinear Schroedinger equation encapsulating the Madelung system. The q-gaussons are obtained for optical media with dual power-law refractive index. In the second case, a Madelung system originally derived via an eikonal approximation in the context of laser beam propagation and in which the de Broglie Bohm term is neglected, is shown to admit invariance under a novel class of two-parameter reciprocal transformations. Model optical laws analogous to the celebrated Karman-Tsien law of classical gasdynamics are introduced.
△ Less
Submitted 11 May, 2018;
originally announced May 2018.
-
Conditions for Parametric and Free-Carrier Oscillation in Silicon Ring Cavities
Authors:
Ryan Hamerly,
Dodd Gray,
Christopher Rogers,
Kambiz Jamshidi
Abstract:
We model optical parametric oscillation in ring cavities with two-photon absorption, focusing on silicon at 1.55$μ$m. Oscillation is possible if free-carrier absorption can be mitigated; this can be achieved using carrier sweep-out in a reverse-biased p-i-n junction to reduce the carrier lifetime. By varying the pump power, detuning, and reverse-bias voltage, it is possible to generate frequency c…
▽ More
We model optical parametric oscillation in ring cavities with two-photon absorption, focusing on silicon at 1.55$μ$m. Oscillation is possible if free-carrier absorption can be mitigated; this can be achieved using carrier sweep-out in a reverse-biased p-i-n junction to reduce the carrier lifetime. By varying the pump power, detuning, and reverse-bias voltage, it is possible to generate frequency combs in cavities with both normal and anomalous dispersion at a wide range of wavelengths including 1.55$μ$m. Furthermore, a free-carrier self-pulsing instability leads to rich dynamics when the carrier lifetime is sufficiently long.
△ Less
Submitted 30 March, 2018; v1 submitted 31 January, 2018;
originally announced February 2018.
-
Novel Application of Density Estimation Techniques in Muon Ionization Cooling Experiment
Authors:
Tanaz Angelina Mohayai,
Pavel Snopok,
David Neuffer,
Chris Rogers
Abstract:
The international Muon Ionization Cooling Experiment (MICE) aims to demonstrate muon beam ionization cooling for the first time and constitutes a key part of the R&D towards a future neutrino factory or muon collider. Beam cooling reduces the size of the phase space volume occupied by the beam. Non-parametric density estimation techniques allow very precise calculation of the muon beam phase-space…
▽ More
The international Muon Ionization Cooling Experiment (MICE) aims to demonstrate muon beam ionization cooling for the first time and constitutes a key part of the R&D towards a future neutrino factory or muon collider. Beam cooling reduces the size of the phase space volume occupied by the beam. Non-parametric density estimation techniques allow very precise calculation of the muon beam phase-space density and its increase as a result of cooling. These density estimation techniques are investigated in this paper and applied in order to estimate the reduction in muon beam size in MICE under various conditions.
△ Less
Submitted 12 October, 2017;
originally announced October 2017.
-
Use of Wedge Absorbers in MICE
Authors:
David Neuffer,
D. Summers,
T. Mohayai,
P. Snopok,
C. Rogers
Abstract:
Wedge absorbers are needed to obtain longitudinal cooling in ionization cooling. They also can be used to obtain emittance exchanges between longitudinal and transverse phase space. There can be large exchanges in emittance, even with single wedges. In the present note we explore the use of wedge absorbers in the MICE experiment to obtain transverse-longitudinal emittance exchanges within present…
▽ More
Wedge absorbers are needed to obtain longitudinal cooling in ionization cooling. They also can be used to obtain emittance exchanges between longitudinal and transverse phase space. There can be large exchanges in emittance, even with single wedges. In the present note we explore the use of wedge absorbers in the MICE experiment to obtain transverse-longitudinal emittance exchanges within present and future operational conditions. The same wedge can be used to explore "direct" and "reverse" emittance exchange dynamics, where direct indicates a configuration that reduces momentum spread and reverse is a configuration that increases momentum spread. Analytical estimated and ICOOL and G4BeamLine simulations of the exchanges at MICE parameters are presented. Large exchanges can be obtained in both reverse and direct configurations.
△ Less
Submitted 12 September, 2017;
originally announced September 2017.
-
Design and expected performance of the MICE demonstration of ionization cooling
Authors:
MICE Collaboration,
M. Bogomilov,
R. Tsenov,
G. Vankova-Kirilova,
Y. Song,
J. Tang,
Z. Li,
R. Bertoni,
M. Bonesini,
F. Chignoli,
R. Mazza,
V. Palladino,
A. de Bari,
G. Cecchet,
D. Orestano,
L. Tortora,
Y. Kuno,
S. Ishimoto,
F. Filthaut,
D. Jokovic,
D. Maletic,
M. Savic,
O. M. Hansen,
S. Ramberger,
M. Vretenar
, et al. (107 additional authors not shown)
Abstract:
Muon beams of low emittance provide the basis for the intense, well-characterised neutrino beams necessary to elucidate the physics of flavour at a neutrino factory and to provide lepton-antilepton collisions at energies of up to several TeV at a muon collider. The international Muon Ionization Cooling Experiment (MICE) aims to demonstrate ionization cooling, the technique by which it is proposed…
▽ More
Muon beams of low emittance provide the basis for the intense, well-characterised neutrino beams necessary to elucidate the physics of flavour at a neutrino factory and to provide lepton-antilepton collisions at energies of up to several TeV at a muon collider. The international Muon Ionization Cooling Experiment (MICE) aims to demonstrate ionization cooling, the technique by which it is proposed to reduce the phase-space volume occupied by the muon beam at such facilities. In an ionization-cooling channel, the muon beam passes through a material in which it loses energy. The energy lost is then replaced using RF cavities. The combined effect of energy loss and re-acceleration is to reduce the transverse emittance of the beam (transverse cooling). A major revision of the scope of the project was carried out over the summer of 2014. The revised experiment can deliver a demonstration of ionization cooling. The design of the cooling demonstration experiment will be described together with its predicted cooling performance.
△ Less
Submitted 27 January, 2017; v1 submitted 23 January, 2017;
originally announced January 2017.
-
Nanosecond Pulse Sha** with Fiber-Based Electro-Optical Modulators and a Double-Pass Tapered Amplifier
Authors:
Charles E. Rogers III,
Phillip L. Gould
Abstract:
We describe a system for generating frequency-chirped and amplitude-shaped pulses on time scales from sub-nanosecond to ten nanoseconds. The system starts with cw diode-laser light at 780 nm and utilizes fiber-based electro-optical phase and intensity modulators, driven by an arbitrary waveform generator, to generate the shaped pulses. These pulses are subsequently amplified to several hundred mW…
▽ More
We describe a system for generating frequency-chirped and amplitude-shaped pulses on time scales from sub-nanosecond to ten nanoseconds. The system starts with cw diode-laser light at 780 nm and utilizes fiber-based electro-optical phase and intensity modulators, driven by an arbitrary waveform generator, to generate the shaped pulses. These pulses are subsequently amplified to several hundred mW with a tapered amplifier in a delayed double-pass configuration. Frequency chirps up to 5 GHz in 2 ns and pulse widths as short as 0.15 ns have been realized.
△ Less
Submitted 4 November, 2015;
originally announced November 2015.
-
Pion contamination in the MICE muon beam
Authors:
D. Adams,
A. Alekou,
M. Apollonio,
R. Asfandiyarov,
G. Barber,
P. Barclay,
A. de Bari,
R. Bayes,
V. Bayliss,
R. Bertoni,
V. J. Blackmore,
A. Blondel,
S. Blot,
M. Bogomilov,
M. Bonesini,
C. N. Booth,
D. Bowring,
S. Boyd,
T. W. Bradshaw,
U. Bravar,
A. D. Bross,
M. Capponi,
T. Carlisle,
G. Cecchet,
C. Charnley
, et al. (120 additional authors not shown)
Abstract:
The international Muon Ionization Cooling Experiment (MICE) will perform a systematic investigation of ionization cooling with muon beams of momentum between 140 and 240\,MeV/c at the Rutherford Appleton Laboratory ISIS facility. The measurement of ionization cooling in MICE relies on the selection of a pure sample of muons that traverse the experiment. To make this selection, the MICE Muon Beam i…
▽ More
The international Muon Ionization Cooling Experiment (MICE) will perform a systematic investigation of ionization cooling with muon beams of momentum between 140 and 240\,MeV/c at the Rutherford Appleton Laboratory ISIS facility. The measurement of ionization cooling in MICE relies on the selection of a pure sample of muons that traverse the experiment. To make this selection, the MICE Muon Beam is designed to deliver a beam of muons with less than $\sim$1\% contamination. To make the final muon selection, MICE employs a particle-identification (PID) system upstream and downstream of the cooling cell. The PID system includes time-of-flight hodoscopes, threshold-Cherenkov counters and calorimetry. The upper limit for the pion contamination measured in this paper is $f_π< 1.4\%$ at 90\% C.L., including systematic uncertainties. Therefore, the MICE Muon Beam is able to meet the stringent pion-contamination requirements of the study of ionization cooling.
△ Less
Submitted 10 February, 2016; v1 submitted 2 November, 2015;
originally announced November 2015.
-
Electron-Muon Ranger: performance in the MICE Muon Beam
Authors:
D. Adams,
A. Alekou,
M. Apollonio,
R. Asfandiyarov,
G. Barber,
P. Barclay,
A. de Bari,
R. Bayes,
V. Bayliss,
P. Bene,
R. Bertoni,
V. J. Blackmore,
A. Blondel,
S. Blot,
M. Bogomilov,
M. Bonesini,
C. N. Booth,
D. Bowring,
S. Boyd,
T. W. Bradshaw,
U. Bravar,
A. D. Bross,
F. Cadoux,
M. Capponi,
T. Carlisle
, et al. (129 additional authors not shown)
Abstract:
The Muon Ionization Cooling Experiment (MICE) will perform a detailed study of ionization cooling to evaluate the feasibility of the technique. To carry out this program, MICE requires an efficient particle-identification (PID) system to identify muons. The Electron-Muon Ranger (EMR) is a fully-active tracking-calorimeter that forms part of the PID system and tags muons that traverse the cooling c…
▽ More
The Muon Ionization Cooling Experiment (MICE) will perform a detailed study of ionization cooling to evaluate the feasibility of the technique. To carry out this program, MICE requires an efficient particle-identification (PID) system to identify muons. The Electron-Muon Ranger (EMR) is a fully-active tracking-calorimeter that forms part of the PID system and tags muons that traverse the cooling channel without decaying. The detector is capable of identifying electrons with an efficiency of 98.6%, providing a purity for the MICE beam that exceeds 99.8%. The EMR also proved to be a powerful tool for the reconstruction of muon momenta in the range 100-280 MeV/$c$.
△ Less
Submitted 3 November, 2015; v1 submitted 28 October, 2015;
originally announced October 2015.
-
Characterization techniques for fixed-field alternating gradient accelerators and beam studies using the KURRI 150 MeV proton FFAG
Authors:
S. L. Sheehy,
D. J. Kelliher,
S. Machida,
C. Rogers,
C. R. Prior,
L. Volat,
M. Haj Tahar,
Y. Ishi,
Y. Kuriyama,
M. Sakamoto,
T. Uesugi,
Y. Mori
Abstract:
In this paper we describe the methods and tools used to characterize a 150 MeV proton scaling Fixed Field Alternating Gradient (FFAG) accelerator at Kyoto University Research Reactor Institute. Many of the techniques used are unique to this class of machine and are thus of relevance to any future FFAG accelerator. For the first time we detail systematic studies undertaken to improve the beam quali…
▽ More
In this paper we describe the methods and tools used to characterize a 150 MeV proton scaling Fixed Field Alternating Gradient (FFAG) accelerator at Kyoto University Research Reactor Institute. Many of the techniques used are unique to this class of machine and are thus of relevance to any future FFAG accelerator. For the first time we detail systematic studies undertaken to improve the beam quality of the FFAG. The control of beam quality in this manner is crucial to demonstrating high power operation of FFAG accelerators in future.
△ Less
Submitted 6 May, 2016; v1 submitted 26 October, 2015;
originally announced October 2015.
-
nuSTORM - Neutrinos from STORed Muons: Proposal to the Fermilab PAC
Authors:
D. Adey,
S. K. Agarwalla,
C. M. Ankenbrandt,
R. Asfandiyarov,
J. J. Back,
G. Barker,
E. Baussan,
R. Bayes,
S. Bhadra,
V. Blackmore,
A. Blondel,
S. A. Bogacz,
C. Booth,
S. B. Boyd,
A. Bravar,
S. J. Brice,
A. D. Bross,
F. Cadoux,
H. Cease,
A. Cervera,
J. Cobb,
D. Colling,
P. Coloma,
L. Coney,
A. Dobbs
, et al. (88 additional authors not shown)
Abstract:
The nuSTORM facility has been designed to deliver beams of electron neutrinos and muon neutrinos (and their anti-particles) from the decay of a stored muon beam with a central momentum of 3.8 GeV/c and a momentum acceptance of 10%. The facility is unique in that it will: 1. Allow searches for sterile neutrinos of exquisite sensitivity to be carried out; 2. Serve future long- and short-baseline neu…
▽ More
The nuSTORM facility has been designed to deliver beams of electron neutrinos and muon neutrinos (and their anti-particles) from the decay of a stored muon beam with a central momentum of 3.8 GeV/c and a momentum acceptance of 10%. The facility is unique in that it will: 1. Allow searches for sterile neutrinos of exquisite sensitivity to be carried out; 2. Serve future long- and short-baseline neutrino-oscillation programs by providing definitive measurements of electron neutrino and muon neutrino scattering cross sections off nuclei with percent-level precision; and 3. Constitutes the crucial first step in the development of muon accelerators as a powerful new technique for particle physics. The document describes the facility in detail and demonstrates its physics capabilities. This document was submitted to the Fermilab Physics Advisory Committee in consideration for Stage I approval.
△ Less
Submitted 31 July, 2013;
originally announced August 2013.
-
Characterisation of the muon beams for the Muon Ionisation Cooling Experiment
Authors:
The MICE Collaboration,
D. Adams,
D. Adey,
A. Alekou,
M. Apollonio,
R. Asfandiyarov,
J. Back,
G. Barber,
P. Barclay,
A. de Bari,
R. Bayes,
V. Bayliss,
R. Bertoni,
V. J. Blackmore,
A. Blondel,
S. Blot,
M. Bogomilov,
M. Bonesini,
C. N. Booth,
D. Bowring,
S. Boyd,
T. W. Bradshaw,
U. Bravar,
A. D. Bross,
M. Capponi
, et al. (119 additional authors not shown)
Abstract:
A novel single-particle technique to measure emittance has been developed and used to characterise seventeen different muon beams for the Muon Ionisation Cooling Experiment (MICE). The muon beams, whose mean momenta vary from 171 to 281 MeV/c, have emittances of approximately 1.5--2.3 πmm-rad horizontally and 0.6--1.0 πmm-rad vertically, a horizontal dispersion of 90--190 mm and momentum spreads o…
▽ More
A novel single-particle technique to measure emittance has been developed and used to characterise seventeen different muon beams for the Muon Ionisation Cooling Experiment (MICE). The muon beams, whose mean momenta vary from 171 to 281 MeV/c, have emittances of approximately 1.5--2.3 πmm-rad horizontally and 0.6--1.0 πmm-rad vertically, a horizontal dispersion of 90--190 mm and momentum spreads of about 25 MeV/c. There is reasonable agreement between the measured parameters of the beams and the results of simulations. The beams are found to meet the requirements of MICE.
△ Less
Submitted 11 October, 2013; v1 submitted 6 June, 2013;
originally announced June 2013.
-
The EUROnu Project
Authors:
T. R. Edgecock,
O. Caretta,
T. Davenne,
C. Densham,
M. Fitton,
D. Kelliher,
P. Loveridge,
S. Machida,
C. Prior,
C. Rogers,
M. Rooney,
J. Thomason,
D. Wilcox,
E. Wildner,
I. Efthymiopoulos,
R. Garoby,
S. Gilardoni,
C. Hansen,
E. Benedetto,
E. Jensen,
A. Kosmicki,
M. Martini,
J. Osborne,
G. Prior,
T. Stora
, et al. (146 additional authors not shown)
Abstract:
The EUROnu project has studied three possible options for future, high intensity neutrino oscillation facilities in Europe. The first is a Super Beam, in which the neutrinos come from the decay of pions created by bombarding targets with a 4 MW proton beam from the CERN High Power Superconducting Proton Linac. The far detector for this facility is the 500 kt MEMPHYS water Cherenkov, located in the…
▽ More
The EUROnu project has studied three possible options for future, high intensity neutrino oscillation facilities in Europe. The first is a Super Beam, in which the neutrinos come from the decay of pions created by bombarding targets with a 4 MW proton beam from the CERN High Power Superconducting Proton Linac. The far detector for this facility is the 500 kt MEMPHYS water Cherenkov, located in the Fréjus tunnel. The second facility is the Neutrino Factory, in which the neutrinos come from the decay of μ+ and μ- beams in a storage ring. The far detector in this case is a 100 kt Magnetised Iron Neutrino Detector at a baseline of 2000 km. The third option is a Beta Beam, in which the neutrinos come from the decay of beta emitting isotopes, in particular 6He and 18Ne, also stored in a ring. The far detector is also the MEMPHYS detector in the Fréjus tunnel. EUROnu has undertaken conceptual designs of these facilities and studied the performance of the detectors. Based on this, it has determined the physics reach of each facility, in particular for the measurement of CP violation in the lepton sector, and estimated the cost of construction. These have demonstrated that the best facility to build is the Neutrino Factory. However, if a powerful proton driver is constructed for another purpose or if the MEMPHYS detector is built for astroparticle physics, the Super Beam also becomes very attractive.
△ Less
Submitted 17 May, 2013;
originally announced May 2013.
-
Neutrinos from Stored Muons nuSTORM: Expression of Interest
Authors:
D. Adey,
S. K. Agarwalla,
C. M. Ankenbrandt,
R. Asfandiyarov,
J. J. Back,
G. Barker,
E. Baussan,
R. Bayes,
S. Bhadra,
V. Blackmore,
A. Blondel,
S. A. Bogacz,
C. Booth,
S. B. Boyd,
A. Bravar,
S. J. Brice,
A. D. Bross,
F. Cadoux,
H. Cease,
A. Cervera,
J. Cobb,
D. Colling,
L. Coney,
A. Dobbs,
J. Dobson
, et al. (84 additional authors not shown)
Abstract:
The nuSTORM facility has been designed to deliver beams of electron and muon neutrinos from the decay of a stored muon beam with a central momentum of 3.8 GeV/c and a momentum spread of 10%. The facility is unique in that it will: serve the future long- and short-baseline neutrino-oscillation programmes by providing definitive measurements of electron-neutrino- and muon-neutrino-nucleus cross sect…
▽ More
The nuSTORM facility has been designed to deliver beams of electron and muon neutrinos from the decay of a stored muon beam with a central momentum of 3.8 GeV/c and a momentum spread of 10%. The facility is unique in that it will: serve the future long- and short-baseline neutrino-oscillation programmes by providing definitive measurements of electron-neutrino- and muon-neutrino-nucleus cross sections with percent-level precision; allow searches for sterile neutrinos of exquisite sensitivity to be carried out; and constitute the essential first step in the incremental development of muon accelerators as a powerful new technique for particle physics.
Of the world's proton-accelerator laboratories, only CERN and FNAL have the infrastructure required to mount nuSTORM. Since no siting decision has yet been taken, the purpose of this Expression of Interest (EoI) is to request the resources required to: investigate in detail how nuSTORM could be implemented at CERN; and develop options for decisive European contributions to the nuSTORM facility and experimental programme wherever the facility is sited.
The EoI defines a two-year programme culminating in the delivery of a Technical Design Report.
△ Less
Submitted 7 May, 2013;
originally announced May 2013.
-
Production of Ultracold Molecules with Chirped Nanosecond Pulses: Evidence for Coherent Effects
Authors:
J. L. Carini,
J. A. Pechkis,
C. E. Rogers III,
P. L. Gould,
S. Kallush,
R. Kosloff
Abstract:
We use frequency-chirped light on the nanosecond time scale to produce ultracold $^{87}$Rb$_{2}$ molecules in the lowest triplet state via the process of photoassociation. Comparing to quantum simulations of the molecular formation, we conclude that coherent stimulated emission plays an important role and is primarily responsible for the significant difference observed between positive and negativ…
▽ More
We use frequency-chirped light on the nanosecond time scale to produce ultracold $^{87}$Rb$_{2}$ molecules in the lowest triplet state via the process of photoassociation. Comparing to quantum simulations of the molecular formation, we conclude that coherent stimulated emission plays an important role and is primarily responsible for the significant difference observed between positive and negative chirps.
△ Less
Submitted 22 October, 2012;
originally announced October 2012.
-
A 2+1-Dimensional Non-Isothermal Magnetogasdynamic System. Hamiltonian-Ermakov Integrable Reduction
Authors:
Hongli An,
Colin Rogers
Abstract:
A 2+1-dimensional anisentropic magnetogasdynamic system with a polytropic gas law is shown to admit an integrable elliptic vortex reduction when $γ=2$ to a nonlinear dynamical subsystem with underlying integrable Hamiltonian-Ermakov structure. Exact solutions of the magnetogasdynamic system are thereby obtained which describe a rotating elliptic plasma cylinder. The semi-axes of the elliptical cro…
▽ More
A 2+1-dimensional anisentropic magnetogasdynamic system with a polytropic gas law is shown to admit an integrable elliptic vortex reduction when $γ=2$ to a nonlinear dynamical subsystem with underlying integrable Hamiltonian-Ermakov structure. Exact solutions of the magnetogasdynamic system are thereby obtained which describe a rotating elliptic plasma cylinder. The semi-axes of the elliptical cross-section, remarkably, satisfy a Ermakov-Ray-Reid system.
△ Less
Submitted 23 August, 2012;
originally announced August 2012.
-
The Heads and Tails of Buoyant Autocatalytic Balls
Authors:
Michael C. Rogers,
Stephen W. Morris
Abstract:
Buoyancy produced by autocatalytic reaction fronts can produce fluid flows that advect the front position, giving rise to interesting feedback between chemical and hydrodynamic effects. In a large diameter, extended cylinder that is relatively free of boundary constraints, localized initiation of an iodate-arsenous acid (IAA) reaction front on the bottom boundary generates a rising autocatalytic p…
▽ More
Buoyancy produced by autocatalytic reaction fronts can produce fluid flows that advect the front position, giving rise to interesting feedback between chemical and hydrodynamic effects. In a large diameter, extended cylinder that is relatively free of boundary constraints, localized initiation of an iodate-arsenous acid (IAA) reaction front on the bottom boundary generates a rising autocatalytic plume. Such plumes have several differences from their non-reactive counterparts. Using numerical simulation, we have found that if reaction is initiated using a spherical ball of product solution well above the bottom boundary, the subsequent flow can evolve much like an autocatalytic plume: the ball develops a reacting head and tail that is akin to the head and conduit of an autocatalytic plume, except that the tail is disconnected from the boundary. In the limit of large initial autocatalytic balls, however, growth of a reacting tail is suppressed and the resemblance to plumes disappears. Conversely, very small balls of product solution fail to initiate sustained fronts and eventually disappear.
△ Less
Submitted 17 April, 2012;
originally announced April 2012.
-
IDR muon capture front end and variations
Authors:
David Neuffer,
Gersende Prior,
Christopher Rogers,
Pavel Snopok,
Cary Yoshikawa
Abstract:
The (International Design Report) IDR neutrino factory scenario for capture, bunching, phase-energy rotation and initial cooling of micro's produced from a proton source target is explored. It requires a drift section from the target, a bunching section and a -E rotation section leading into the cooling channel. The rf frequency changes along the bunching and rotation transport in order to form th…
▽ More
The (International Design Report) IDR neutrino factory scenario for capture, bunching, phase-energy rotation and initial cooling of micro's produced from a proton source target is explored. It requires a drift section from the target, a bunching section and a -E rotation section leading into the cooling channel. The rf frequency changes along the bunching and rotation transport in order to form the 's into a train of equal-energy bunches suitable for cooling and acceleration. Optimization and variations are discussed. An important concern is rf limitations within the focusing magnetic fields, mitigation procedures are described. The method can be extended to provide muons for a micro+-micro < Collider, variations toward optimizing that extension are discussed.
△ Less
Submitted 16 February, 2012;
originally announced February 2012.
-
Muon capture in the front end of the IDS neutrino factory
Authors:
D. Neuffer,
M. Martini,
G. Prior,
C. Rogers,
C. Yoshikawa
Abstract:
We discuss the design of the muon capture front end of the neutrino factory International Design Study. In the front end, a proton bunch on a target creates secondary pions that drift into a capture transport channel, decaying into muons. A sequence of rf cavities forms the resulting muon beams into strings of bunches of differing energies, aligns the bunches to (nearly) equal central energies, an…
▽ More
We discuss the design of the muon capture front end of the neutrino factory International Design Study. In the front end, a proton bunch on a target creates secondary pions that drift into a capture transport channel, decaying into muons. A sequence of rf cavities forms the resulting muon beams into strings of bunches of differing energies, aligns the bunches to (nearly) equal central energies, and initiates ionization cooling. The muons are then accelerated to high energy where their decays provide neutrino beams. For the International Design Study (IDS), a baseline design must be developed and optimized for an engineering and cost study. We present a baseline design that can be used to establish the scope of a future neutrino Factory facility.
△ Less
Submitted 1 February, 2012;
originally announced February 2012.
-
MICE: the Muon Ionization Cooling Experiment. Step I: First Measurement of Emittance with Particle Physics Detectors
Authors:
U. Bravar,
M. Bogomilov,
Y. Karadzhov,
D. Kolev,
I. Russinov,
R. Tsenov,
L. Wang,
F. Y. Xu,
S. X. Zheng,
R. Bertoni,
M. Bonesini,
R. Mazza,
V. Palladino,
G. Cecchet,
A. de Bari,
M. Capponi,
A. Iaciofano,
D. Orestano,
F. Pastore,
L. Tortora,
S. Ishimoto,
S. Suzuki,
K. Yoshimura,
Y. Mori,
Y. Kuno
, et al. (123 additional authors not shown)
Abstract:
The Muon Ionization Cooling Experiment (MICE) is a strategic R&D project intended to demonstrate the only practical solution to providing high brilliance beams necessary for a neutrino factory or muon collider. MICE is under development at the Rutherford Appleton Laboratory (RAL) in the United Kingdom. It comprises a dedicated beamline to generate a range of input muon emittances and momenta, with…
▽ More
The Muon Ionization Cooling Experiment (MICE) is a strategic R&D project intended to demonstrate the only practical solution to providing high brilliance beams necessary for a neutrino factory or muon collider. MICE is under development at the Rutherford Appleton Laboratory (RAL) in the United Kingdom. It comprises a dedicated beamline to generate a range of input muon emittances and momenta, with time-of-flight and Cherenkov detectors to ensure a pure muon beam. The emittance of the incoming beam will be measured in the upstream magnetic spectrometer with a scintillating fiber tracker. A cooling cell will then follow, alternating energy loss in Liquid Hydrogen (LH2) absorbers to RF cavity acceleration. A second spectrometer, identical to the first, and a second muon identification system will measure the outgoing emittance. In the 2010 run at RAL the muon beamline and most detectors were fully commissioned and a first measurement of the emittance of the muon beam with particle physics (time-of-flight) detectors was performed. The analysis of these data was recently completed and is discussed in this paper. Future steps for MICE, where beam emittance and emittance reduction (cooling) are to be measured with greater accuracy, are also presented.
△ Less
Submitted 30 July, 2013; v1 submitted 9 October, 2011;
originally announced October 2011.
-
Coherent control of ultracold 85Rb trap-loss collisions with nonlinearly frequency-chirped light
Authors:
J. A. Pechkis,
J. L. Carini,
C. E. Rogers III,
P. L. Gould,
S. Kallush,
R. Kosloff
Abstract:
We present results on coherent control of ultracold trap-loss collisions using 40 ns pulses of nonlinearly frequency-chirped light. The chirps, either positive or negative, sweep ~1 GHz in 100 ns and are centered at various detunings below the D2 line of 85Rb. At each center detuning, we compare the collisional rate constant beta for chirps that are linear in time, concave-down and concave-up. For…
▽ More
We present results on coherent control of ultracold trap-loss collisions using 40 ns pulses of nonlinearly frequency-chirped light. The chirps, either positive or negative, sweep ~1 GHz in 100 ns and are centered at various detunings below the D2 line of 85Rb. At each center detuning, we compare the collisional rate constant beta for chirps that are linear in time, concave-down and concave-up. For positive chirps, we find that beta generally depends very little on the shape of the chirp. For negative chirps, however, we find that beta can be enhanced by up to 50(20)% for the case of the concave-down shape. This occurs at detunings where the evolution of the wavepacket is expected to be coherent. An enhancement at these detunings is also seen in quantum mechanical simulations of the collisional process.
△ Less
Submitted 1 May, 2011;
originally announced May 2011.
-
Creation of arbitrary spectra with an electro-optic modulator
Authors:
C. E. Rogers III,
J. L. Carini,
J. A. Pechkis,
P. L. Gould
Abstract:
We use a waveguide-based electro-optic phase modulator, driven by a nanosecond-timescale arbitrary waveform generator, to produce an optical spectrum with an arbitrary pattern of sidebands. A programmed sequence of linear voltage ramps, with various slopes, is applied to the modulator. The resulting phase ramps give rise to sidebands whose frequency offsets relative to the carrier are equal to the…
▽ More
We use a waveguide-based electro-optic phase modulator, driven by a nanosecond-timescale arbitrary waveform generator, to produce an optical spectrum with an arbitrary pattern of sidebands. A programmed sequence of linear voltage ramps, with various slopes, is applied to the modulator. The resulting phase ramps give rise to sidebands whose frequency offsets relative to the carrier are equal to the slopes of the corresponding linear phase ramps. This extension of the serrodyne technique provides multi-line spectra with sideband spacings in the 100 MHz range.
△ Less
Submitted 23 November, 2010;
originally announced November 2010.
-
Autocatalytic plume pinch-off
Authors:
Michael C. Rogers,
Abdel Zebib,
Stephen W. Morris
Abstract:
A localized source of buoyancy flux in a non-reactive fluid medium creates a plume. The flux can be provided by either heat, a compositional difference between the fluid comprising the plume and its surroundings, or a combination of both. For autocatalytic plumes produced by the iodate-arsenous acid reaction, however, buoyancy is produced along the entire reacting interface between the plume and i…
▽ More
A localized source of buoyancy flux in a non-reactive fluid medium creates a plume. The flux can be provided by either heat, a compositional difference between the fluid comprising the plume and its surroundings, or a combination of both. For autocatalytic plumes produced by the iodate-arsenous acid reaction, however, buoyancy is produced along the entire reacting interface between the plume and its surroundings. Buoyancy production at the moving interface drives fluid motion, which in turn generates flow that advects the reaction front. As a consequence of this interplay between fluid flow and chemical reaction, autocatalytic plumes exhibit a rich dynamics during their ascent through the reactant medium. One of the more interesting dynamical features is the production of an accelerating vortical plume head that in certain cases pinches-off and detaches from the upwelling conduit. After pinch-off, a new plume head forms in the conduit below, and this can lead to multiple generations of plume heads for a single plume initiation. We investigated the pinch-off process using both experimentation and simulation. Experiments were performed using various concentrations of glycerol, in which it was found that repeated pinch-off occurs exclusively in a specific concentration range. Autocatalytic plume simulations revealed that pinch-off is triggered by the appearance of accelerating flow in the plume conduit.
△ Less
Submitted 18 November, 2010; v1 submitted 1 October, 2010;
originally announced October 2010.
-
The design, construction and performance of the MICE scintillating fibre trackers
Authors:
M. Ellis,
P. R. Hobson,
P. Kyberd,
J. J. Nebrensky,
A. Bross,
J. Fagan,
T. Fitzpatrick,
R. Flores,
R. Kubinski,
J. Krider,
R. Rucinski,
P. Rubinov,
C. Tolian,
T. L. Hart,
D. M. Kaplan,
W. Luebke,
B. Freemire,
M. Wojcik,
G. Barber,
D. Clark,
I. Clark,
P. J. Dornan,
A. Fish,
S. Greenwood,
R. Hare
, et al. (27 additional authors not shown)
Abstract:
Charged-particle tracking in the international Muon Ionisation Cooling Experiment (MICE) will be performed using two solenoidal spectrometers, each instrumented with a tracking detector based on 350 μm diameter scintillating fibres. The design and construction of the trackers is described along with the quality-assurance procedures, photon-detection system, readout electronics, reconstruction and…
▽ More
Charged-particle tracking in the international Muon Ionisation Cooling Experiment (MICE) will be performed using two solenoidal spectrometers, each instrumented with a tracking detector based on 350 μm diameter scintillating fibres. The design and construction of the trackers is described along with the quality-assurance procedures, photon-detection system, readout electronics, reconstruction and simulation software and the data-acquisition system. Finally, the performance of the MICE tracker, determined using cosmic rays, is presented.
△ Less
Submitted 11 July, 2010; v1 submitted 19 May, 2010;
originally announced May 2010.
-
Characterization and Compensation of the Residual Chirp in a Mach-Zehnder-Type Electro-Optical Intensity Modulator
Authors:
C. E. Rogers III,
J. L. Carini,
J. A. Pechkis,
P. L. Gould
Abstract:
We utilize various techniques to characterize the residual phase modulation of a fiber-based Mach-Zehnder electro-optical intensity modulator. A heterodyne technique is used to directly measure the phase change due to a given change in intensity, thereby determining the chirp parameter of the device. This chirp parameter is also measured by examining the ratio of sidebands for sinusoidal amplitu…
▽ More
We utilize various techniques to characterize the residual phase modulation of a fiber-based Mach-Zehnder electro-optical intensity modulator. A heterodyne technique is used to directly measure the phase change due to a given change in intensity, thereby determining the chirp parameter of the device. This chirp parameter is also measured by examining the ratio of sidebands for sinusoidal amplitude modulation. Finally, the frequency chirp caused by an intensity pulse on the nanosecond time scale is measured via the heterodyne signal. We show that this chirp can be largely compensated with a separate phase modulator. The various measurements of the chirp parameter are in reasonable agreement.
△ Less
Submitted 17 March, 2010; v1 submitted 29 October, 2009;
originally announced October 2009.
-
Natural versus forced convection in laminar starting plumes
Authors:
Michael C. Rogers,
Stephen W. Morris
Abstract:
A starting plume or jet has a well-defined, evolving head that is driven through the surrounding quiescent fluid by a localized flux of either buoyancy or momentum, or both. We studied the scaling and morphology of starting plumes produced by a constant flux of buoyant fluid from a small, submerged outlet. The plumes were laminar and spanned a wide range of plume Richardson numbers Ri. Ri is the…
▽ More
A starting plume or jet has a well-defined, evolving head that is driven through the surrounding quiescent fluid by a localized flux of either buoyancy or momentum, or both. We studied the scaling and morphology of starting plumes produced by a constant flux of buoyant fluid from a small, submerged outlet. The plumes were laminar and spanned a wide range of plume Richardson numbers Ri. Ri is the dimensionless ratio of the buoyancy forces to inertial effects, and is thus our measurements crossed over the transition between buoyancy-driven plumes and momentum-driven jets. We found that the ascent velocity of the plume, nondimensionalized by Ri, exhibits a power law relationship with Re, the Reynolds number of the injected fluid in the outlet pipe. We also found that as the threshold between buoyancy-driven and momentum-driven flow was crossed, two distinct types of plume head mophologies existed: confined heads, produced in the Ri > 1 regime, and dispersed heads, which are found in the Ri < 1 regime. Head dispersal is caused by a breakdown of overturning motion in the head, and a local Kelvin-Helmholtz instability on the exterior of the plume.
△ Less
Submitted 14 August, 2009; v1 submitted 4 May, 2009;
originally announced May 2009.
-
Generation of Arbitrary Frequency Chirps with a Fiber-Based Phase Modulator and Self-Injection-Locked Diode Laser
Authors:
C. E. Rogers III,
M. J. Wright,
J. L. Carini,
J. A. Pechkis,
P. L. Gould
Abstract:
We present a novel technique for producing pulses of laser light whose frequency is arbitrarily chirped. The output from a diode laser is sent through a fiber-optical delay line containing a fiber-based electro-optical phase modulator. Upon emerging from the fiber, the phase-modulated pulse is used to injection-lock the laser and the process is repeated. Large phase modulations are realized by m…
▽ More
We present a novel technique for producing pulses of laser light whose frequency is arbitrarily chirped. The output from a diode laser is sent through a fiber-optical delay line containing a fiber-based electro-optical phase modulator. Upon emerging from the fiber, the phase-modulated pulse is used to injection-lock the laser and the process is repeated. Large phase modulations are realized by multiple passes through the loop while the high optical power is maintained by self-injection-locking after each pass. Arbitrary chirps are produced by driving the modulator with an arbitrary waveform generator.
△ Less
Submitted 6 November, 2006;
originally announced November 2006.
-
Autocatalytic chemical smoke rings
Authors:
Michael C. Rogers,
Stephen W. Morris
Abstract:
Buoyant plumes, evolving free of boundary constraints, may develop well-defined mushroom shaped heads. In normal plumes, overturning flow in the head entrains less buoyant fluid from the surroundings as the head rises, robbing the plume of its driving force. We consider here a new type of plume in which the source of buoyancy is an autocatalytic chemical reaction. The reaction occurs at a sharp…
▽ More
Buoyant plumes, evolving free of boundary constraints, may develop well-defined mushroom shaped heads. In normal plumes, overturning flow in the head entrains less buoyant fluid from the surroundings as the head rises, robbing the plume of its driving force. We consider here a new type of plume in which the source of buoyancy is an autocatalytic chemical reaction. The reaction occurs at a sharp front which separates reactants from less dense products. In this type of plume, entrainment assists the reaction, producing new buoyancy which fuels an accelerating plume head. When the head has grown to a critical size, it detaches from the upwelling conduit, forming an accelerating, buoyant vortex ring. This vortex is analogous to a rising smoke ring. A second-generation head then develops at the point of detachment.Multiple generations of chemical vortex rings can detach from a single triggering event.
△ Less
Submitted 14 January, 2005;
originally announced January 2005.