-
Spatially Resolved High Voltage Kelvin Probe Force Microcopy: A Novel Avenue for Examining Electrical Phenomena at Nanoscale
Authors:
Conor J. McCluskey,
Niyorjyoti Sharma,
Jesi R. Maguire,
Serene Pauly,
Andrew Rogers,
TJ Lindsay,
Kristina M. Holsgrove,
Brian J. Rodriguez,
Navneet Soin,
John Marty Gregg,
Raymond G. P. McQuaid,
Amit Kumar
Abstract:
Kelvin probe microscopy (KPFM) is a well-established scanning probe technique, used to measure surface potential accurately; it has found extensive use in the study of a range of materials phenomena. In its conventional form, KPFM frustratingly precludes imaging samples or scenarios where large surface potential exists or large surface potential gradients are created outside the typical +/-10V win…
▽ More
Kelvin probe microscopy (KPFM) is a well-established scanning probe technique, used to measure surface potential accurately; it has found extensive use in the study of a range of materials phenomena. In its conventional form, KPFM frustratingly precludes imaging samples or scenarios where large surface potential exists or large surface potential gradients are created outside the typical +/-10V window. If the potential regime measurable via KPFM could be expanded, to enable precise and reliable metrology, through a high voltage KPFM (HV-KPFM) adaptation, it could open up pathways towards a range of novel experiments, where the detection limit of regular KPFM has so far prevented the use of the technique. In this work, HV-KPFM has been realised and shown to be capable of measuring large surface potential and potential gradients with accuracy and precision. The technique has been employed to study a range of materials (positive temperature coefficient of resistivity ceramics, charge storage fluoropolymers and pyroelectrics) where accurate spatially resolved map** of surface potential within high voltage regime facilitates novel physical insight. The results demonstrate that HV-KPFM can be used as an effective tool to fill in existing gaps in surface potential measurements while also opening routes for novel studies in materials physics.
△ Less
Submitted 25 January, 2024;
originally announced January 2024.
-
Multi-scale observation of magnetotail reconnection onset: 2. microscopic dynamics
Authors:
K. J. Genestreti,
C. Farrugia,
S. Lu,
S. K. Vines,
P. H. Reiff,
T. -D. Phan,
D. N. Baker,
T. W. Leonard,
J. L. Burch,
S. T. Bingham,
I. J. Cohen,
J. R. Shuster,
D. J. Gershman,
C. G. Mouikis,
A. T. Rogers,
R. B. Torbert,
K. J. Trattner,
J. M. Webster,
L. -J. Chen,
B. L. Giles,
N. Ahmadi,
R. E. Ergun,
C. T. Russell,
R. J. Strangeway,
R. Nakamura
, et al. (1 additional authors not shown)
Abstract:
We analyze the local dynamics of magnetotail reconnection onset using Magnetospheric Multiscale (MMS) data. In conjunction with MMS, the macroscopic dynamics of this event were captured by a number of other ground and space-based observatories, as is reported in a companion paper. We find that the local dynamics of the onset were characterized by the rapid thinning of the cross-tail current sheet…
▽ More
We analyze the local dynamics of magnetotail reconnection onset using Magnetospheric Multiscale (MMS) data. In conjunction with MMS, the macroscopic dynamics of this event were captured by a number of other ground and space-based observatories, as is reported in a companion paper. We find that the local dynamics of the onset were characterized by the rapid thinning of the cross-tail current sheet below the ion inertial scale, accompanied by the growth of flap** waves and the subsequent onset of electron tearing. Multiple kinetic-scale magnetic islands were detected coincident with the growth of an initially sub-Alfvénic, demagnetized tailward ion exhaust. The onset and rapid enhancement of parallel electron inflow at the exhaust boundary was a remote signature of the intensification of reconnection Earthward of the spacecraft. Two secondary reconnection sites are found embedded within the exhaust from a primary X-line. The primary X-line was designated as such on the basis that (1) while multiple jet reversals were observed in the current sheet, only one reversal of the electron inflow was observed at the high-latitude exhaust boundary, (2) the reconnection electric field was roughly 5 times larger at the primary X-line than the secondary X-lines, and (3) energetic electron fluxes increased and transitioned from anti-field-aligned to isotropic during the primary X-line crossing, indicating a change in magnetic topology. The results are consistent with the idea that a primary X-line mediates the reconnection of lobe magnetic field lines and accelerates electrons more efficiently than its secondary X-line counterparts.
△ Less
Submitted 9 November, 2023;
originally announced November 2023.
-
Multi-scale observation of magnetotail reconnection onset: 1. macroscopic dynamics
Authors:
K. J. Genestreti,
C. Farrugia,
S. Lu,
S. K. Vines,
P. H. Reiff,
T. -D. Phan,
D. N. Baker,
T. W. Leonard,
J. L. Burch,
S. T. Bingham,
I. J. Cohen,
J. R. Shuster,
D. J. Gershman,
C. G. Mouikis,
A. T. Rogers,
R. B. Torbert,
K. J. Trattner,
J. M. Webster,
L. -J. Chen,
B. L. Giles,
N. Ahmadi,
R. E. Ergun,
C. T. Russell,
R. J. Strangeway,
R. Nakamura
Abstract:
We analyze a magnetotail reconnection onset event on 3 July 2017 that was observed under otherwise quiescent magnetospheric conditions by a fortuitous conjunction of six space and ground-based observatories. The study investigates the large-scale coupling of the solar wind - magnetosphere system that precipitated the onset of the magnetotail reconnection, focusing on the processes that thinned and…
▽ More
We analyze a magnetotail reconnection onset event on 3 July 2017 that was observed under otherwise quiescent magnetospheric conditions by a fortuitous conjunction of six space and ground-based observatories. The study investigates the large-scale coupling of the solar wind - magnetosphere system that precipitated the onset of the magnetotail reconnection, focusing on the processes that thinned and stretched the cross-tail current layer in the absence of significant flux loading during a two-hour-long preconditioning phase. It is demonstrated with data in the (1) upstream solar wind, (2) at the low-latitude magnetopause, (3) in the high-latitude polar cap, and (4) in the magnetotail that the typical picture of solar wind-driven current sheet thinning via flux loading does not appear relevant for this particular event. We find that the current sheet thinning was, instead, initiated by a transient solar wind pressure pulse and that the current sheet thinning continued even as the magnetotail and solar wind pressures decreased. We suggest that field line curvature induced scattering (observed by Magnetospheric Multiscale (MMS)) and precipitation (observed by Defense Meteorological Satellite Program (DMSP)) of high-energy thermal protons may have evacuated plasma sheet thermal energy, which may require a thinning of the plasma sheet to preserve pressure equilibrium with the solar wind.
△ Less
Submitted 9 November, 2023;
originally announced November 2023.
-
The physical origin of aneurysm growth, dissection, and rupture
Authors:
Tom Y. Zhao,
**-Tae Kim,
Min Cho,
Akhil Narang,
John A. Rogers,
Neelesh A. Patankar
Abstract:
Rupture of aortic aneurysms is by far the most fatal heart disease, with a mortality rate exceeding 80%. There are no reliable clinical protocols to predict growth, dissection, and rupture because the fundamental physics driving aneurysm progression is unknown. Here, via in-vitro experiments, we show that a blood-wall, fluttering instability manifests in synthetic arteries under pulsatile forcing.…
▽ More
Rupture of aortic aneurysms is by far the most fatal heart disease, with a mortality rate exceeding 80%. There are no reliable clinical protocols to predict growth, dissection, and rupture because the fundamental physics driving aneurysm progression is unknown. Here, via in-vitro experiments, we show that a blood-wall, fluttering instability manifests in synthetic arteries under pulsatile forcing. We establish a phase space to prove that the transition from stable flow to unstable aortic flutter is accurately predicted by a flutter instability parameter derived from first principles. Time resolved strain maps of the evolving system reveal the dynamical characteristics of aortic flutter that drive aneurysm progression. We show that low level instability can trigger permanent aortic growth, even in the absence of material remodeling. Sufficiently large flutter beyond a secondary threshold localizes strain in the walls to the length scale clinically observed in aortic dissection. Lastly, significant physical flutter beyond a tertiary threshold can ultimately induce aneurysm rupture via failure modes reported from necropsy. Resolving the fundamental physics of aneurysm progression directly leads to clinical protocols that forecast growth as well as intercept dissection and rupture by pinpointing their physical origin.
△ Less
Submitted 1 November, 2023;
originally announced November 2023.
-
Wavelength dependence of laser-induced nanowelded microstructures assembled from metal nanoparticles
Authors:
Ariel Rogers,
Isabelle I. Niyonshuti,
Jun Ou,
Diksha Shrestha,
**gyi Chen,
Yong Wang
Abstract:
Light-based nanowelding of metallic nanoparticles is of particular interest because it provides convenient and controlled means for the conversion of nanoparticles into microstructures and fabrication of nanodevices. Here, we demonstrated the wavelength dependence of laser-induced nanowelded shapes of silver nanoparticles (AgNPs). We observed that the nanowelded microstructures illuminated by the…
▽ More
Light-based nanowelding of metallic nanoparticles is of particular interest because it provides convenient and controlled means for the conversion of nanoparticles into microstructures and fabrication of nanodevices. Here, we demonstrated the wavelength dependence of laser-induced nanowelded shapes of silver nanoparticles (AgNPs). We observed that the nanowelded microstructures illuminated by the 405 nm laser only were more branched than those formed with illumination of both the 405 nm and 532 nm lasers. We quantified this observation by several compactness descriptors and examined the dependence of the power of the 532 nm laser. More importantly, to understand the experimental observations, we formulated and tested a hypothesis by calculating the wavelength-dependent electric field enhancement due to surface plasmon resonance of the AgNPs and nanowelded microstructures when illuminated with lights at the two wavelengths. Based on the different patterns of "hot spots" for welding AgNPs from these calculations, numerical simulations successfully "reproduced" the different shapes of nanowelded microstructures, supporting our hypothesis. This work suggests the possibility of light-based controlling the shapes of laser-induced nanowelded microstructures of metallic nanoparticles. This work is expected to facilitate the development of better nanowelding strategies of metallic nanoparticles for broader applications.
△ Less
Submitted 21 February, 2023;
originally announced February 2023.
-
The HD 260655 system: Two rocky worlds transiting a bright M dwarf at 10 pc
Authors:
R. Luque,
B. J. Fulton,
M. Kunimoto,
P. J. Amado,
P. Gorrini,
S. Dreizler,
C. Hellier,
G. W. Henry,
K. Molaverdikhani,
G. Morello,
L. Peña-Moñino,
M. Pérez-Torres,
F. J. Pozuelos,
Y. Shan,
G. Anglada-Escudé,
V. J. S. Béjar,
G. Bergond,
A. W. Boyle,
J. A. Caballero,
D. Charbonneau,
D. R. Ciardi,
S. Dufoer,
N. Espinoza,
M. Everett,
D. Fischer
, et al. (42 additional authors not shown)
Abstract:
We report the discovery of a multi-planetary system transiting the M0 V dwarf HD 260655 (GJ 239, TOI-4599). The system consists of at least two transiting planets, namely HD 260655 b, with a period of 2.77 d, a radius of R$_b$ = 1.240$\pm$0.023 R$_\oplus$, a mass of M$_b$ = 2.14$\pm$0.34 M$_\oplus$, and a bulk density of $ρ_b$ = 6.2$\pm$1.0 g cm$^{-3}$, and HD 260655 c, with a period of 5.71 d, a…
▽ More
We report the discovery of a multi-planetary system transiting the M0 V dwarf HD 260655 (GJ 239, TOI-4599). The system consists of at least two transiting planets, namely HD 260655 b, with a period of 2.77 d, a radius of R$_b$ = 1.240$\pm$0.023 R$_\oplus$, a mass of M$_b$ = 2.14$\pm$0.34 M$_\oplus$, and a bulk density of $ρ_b$ = 6.2$\pm$1.0 g cm$^{-3}$, and HD 260655 c, with a period of 5.71 d, a radius of R$_c$ = 1.533$^{+0.051}_{-0.046}$ R$_\oplus$, a mass of M$_c$ = 3.09$\pm$0.48 M$_\oplus$, and a bulk density of $ρ_c$ = 4.7$^{+0.9}_{-0.8}$ g cm$^{-3}$. The planets were detected in transit by the TESS mission and confirmed independently with archival and new precise radial velocities obtained with the HIRES and CARMENES instruments since 1998 and 2016, respectively. At a distance of 10 pc, HD 260655 becomes the fourth closest known multi-transiting planet system after HD 219134, LTT 1445 A, and AU Mic. Due to the apparent brightness of the host star (J = 6.7 mag), both planets are among the most suitable rocky worlds known today for atmospheric studies with the JWST, both in transmission and emission.
△ Less
Submitted 13 June, 2022; v1 submitted 21 April, 2022;
originally announced April 2022.
-
Applying Magnetic Curvature to to MMS data to identify thin current sheets relative to tail reconnection
Authors:
A. J. Rogers,
C. J. Farrugia,
R. B. Torbert,
T. J. Rogers
Abstract:
Magnetic reconnection X-lines have been observed to be more common duskward of midnight. Thin current sheets have also been postulated to be a necessary precondition for reconnection onset. We take advantage of the MMS tetrahedral formation during the 2017--2020 MMS tail seasons to calculate the thickness of the cross-tail neutral sheet relative to ion gyroradius. While a similar technique was app…
▽ More
Magnetic reconnection X-lines have been observed to be more common duskward of midnight. Thin current sheets have also been postulated to be a necessary precondition for reconnection onset. We take advantage of the MMS tetrahedral formation during the 2017--2020 MMS tail seasons to calculate the thickness of the cross-tail neutral sheet relative to ion gyroradius. While a similar technique was applied to Cluster data, current sheet thickness over a broader range of radial distances has not been robustly explored before this study. We compare this to recent theories regarding mechanisms of tail current sheet thinning and to recent simulations. We find MMS spent more than twice as long in ion-scale thin current sheets in the pre-midnight sector than post-midnight, despite nearly even plasma sheet dwell time. The dawn-dusk asymmetry in the distribution of Ion Diffusion Regions, as previously reported in relation to regions of thin current sheets, is also analyzed.
△ Less
Submitted 8 December, 2021;
originally announced December 2021.
-
A dynamically reprogrammable metasurface with self-evolving shape morphing
Authors:
Yun Bai,
Heling Wang,
Yeguang Xue,
Yuxin Pan,
**-Tae Kim,
Xinchen Ni,
Tzu-Li Liu,
Yiyuan Yang,
Mengdi Han,
Yonggang Huang,
John A. Rogers,
Xiaoyue Ni
Abstract:
Dynamic shape-morphing soft materials systems are ubiquitous in living organisms; they are also of rapidly increasing relevance to emerging technologies in soft machines, flexible electronics, and smart medicines. Soft matter equipped with responsive components can switch between designed shapes or structures, but cannot support the types of dynamic morphing capabilities needed to reproduce natura…
▽ More
Dynamic shape-morphing soft materials systems are ubiquitous in living organisms; they are also of rapidly increasing relevance to emerging technologies in soft machines, flexible electronics, and smart medicines. Soft matter equipped with responsive components can switch between designed shapes or structures, but cannot support the types of dynamic morphing capabilities needed to reproduce natural, continuous processes of interest for many applications. Challenges lie in the development of schemes to reprogram target shapes post fabrication, especially when complexities associated with the operating physics and disturbances from the environment can prohibit the use of deterministic theoretical models to guide inverse design and control strategies. Here, we present a mechanical metasurface constructed from a matrix of filamentary metal traces, driven by reprogrammable, distributed Lorentz forces that follow from passage of electrical currents in the presence of a static magnetic field. The resulting system demonstrates complex, dynamic morphing capabilities with response times within 0.1 s. Implementing an in-situ stereo-imaging feedback strategy with a digitally controlled actuation scheme guided by an optimization algorithm, yields surfaces that can self-evolve into a wide range of 3-dimensional (3D) target shapes with high precision, including an ability to morph against extrinsic or intrinsic perturbations. These concepts support a data-driven approach to the design of dynamic, soft matter, with many unique characteristics.
△ Less
Submitted 8 December, 2021;
originally announced December 2021.
-
High amplification laser-pressure optic enables ultra-low uncertainty measurements at kilowatts
Authors:
Alexandra B. Artusio-Glimpse,
Kyle A. Rogers,
Paul A. Williams,
John H. Lehman
Abstract:
We present the first measurements of kilowatt laser power with an uncertainty less than 1 %. These represent progress toward the most accurate measurements of laser power above 1 kW at 1070 nm wavelength and establish a more precise link between force metrology and laser power metrology. Radiation pressure, or photon momentum, is a relatively new method of non-destructively measuring laser power.…
▽ More
We present the first measurements of kilowatt laser power with an uncertainty less than 1 %. These represent progress toward the most accurate measurements of laser power above 1 kW at 1070 nm wavelength and establish a more precise link between force metrology and laser power metrology. Radiation pressure, or photon momentum, is a relatively new method of non-destructively measuring laser power. We demonstrate how a multiple reflection optical system amplifies the pressure of a kilowatt class laser incoherently to improve the signal to noise ratio in a radiation pressure-based measurement. With 14 incoherent reflections of the laser, we measure a total uncertainty of 0.26 % for an input power of 10 kW and 0.46 % for an input power of 1 kW at the 95 % confidence level. These measurements of absolute power are traceable to the SI kilogram and mark a state-of-the-art improvement in measurement precision by a factor of four.
△ Less
Submitted 17 May, 2021;
originally announced May 2021.
-
Structure-property relationships via recovery rheology in viscoelastic materials
Authors:
Johnny Ching-Wei Lee,
Katie M. Weigandt,
Elizabeth G. Kelley,
Simon A. Rogers
Abstract:
The recoverable strain is shown to correlate to the temporal evolution of microstructure via time-resolved small-angle neutron scattering (SANS) and dynamic shear rheology. Investigating two distinct polymeric materials of wormlike micelles and fibrin network, we demonstrate that, in addition to the nonlinear structure-property relationships, the shear and normal stress evolution is dictated by th…
▽ More
The recoverable strain is shown to correlate to the temporal evolution of microstructure via time-resolved small-angle neutron scattering (SANS) and dynamic shear rheology. Investigating two distinct polymeric materials of wormlike micelles and fibrin network, we demonstrate that, in addition to the nonlinear structure-property relationships, the shear and normal stress evolution is dictated by the recoverable strain. A distinct sequence of physical processes under large amplitude oscillatory shear (LAOS) is identified that clearly contains information regarding both the steady-state flow curve and the linear-regime frequency sweep, contrary to most interpretations that LAOS responses are either distinct from, or somehow intermediate between the two cases. This work provides a physically-motivated and straightforward path to further explore the structure-property relationships of viscoelastic materials under dynamic flow conditions.
△ Less
Submitted 19 May, 2019;
originally announced May 2019.
-
Numerical Algorithm for Detecting Ion Diffusion Regions in the Geomagnetic Tail with Applications to MMS Tail Season May 1 -- September 30, 2017
Authors:
A. J. Rogers,
C. J. Farrugia,
R. B. Torbert
Abstract:
We present a numerical algorithm aimed at identifying ion diffusion regions (IDRs) in the geomagnetic tail, and test its applicability. We use 5 criteria applied in three stages. (i) Correlated reversals (within 90 s) of Vx and Bz (at least 2 nT about zero; GSM coordinates); (ii) Detection of Hall electric and magnetic field signatures; and (iii) strong (>10 mV/m) electric fields. While no criteri…
▽ More
We present a numerical algorithm aimed at identifying ion diffusion regions (IDRs) in the geomagnetic tail, and test its applicability. We use 5 criteria applied in three stages. (i) Correlated reversals (within 90 s) of Vx and Bz (at least 2 nT about zero; GSM coordinates); (ii) Detection of Hall electric and magnetic field signatures; and (iii) strong (>10 mV/m) electric fields. While no criterion alone is necessary and sufficient, the approach does provide a robust, if conservative, list of IDRs. We use data from the Magnetospheric Multiscale Mission (MMS) spacecraft during a 5-month period (May 1 to September 30, 2017) of near-tail orbits during the declining phase of the solar cycle. We find 148 events satisfying step 1, 37 satisfying steps 1 and 2, and 17 satisfying all three, of which 12 are confirmed as IDRs. All IDRs were within the X-range [-24, -15] RE mainly on the dusk sector and the majority occurred during traversals of a tailward-moving X-line. 11 of 12 IDRs were on the dusk-side despite approximately equal residence time in both the pre- and post-midnight sectors (56.5% dusk vs 43.5% dawn). MMS could identify signatures of 4 quadrants of the Hall B-structure in 3 events and 3 quadrants in 7 of the remaining 12 confirmed IDRs identified. The events we report commonly display Vx reversals greater than 400 km/s in magnitude, normal magnetic field reversals often >10 nT in magnitude, maximum DC |E| which are often well in excess of the threshold for stage 3. Our results are then compared with the set of IDRs identified by visual examination from Cluster in the years 2000-2005.
△ Less
Submitted 24 April, 2019;
originally announced April 2019.
-
Design, construction, and characterization of a compact DD neutron generator designed for 40Ar/39Ar geochronology
Authors:
Mauricio Ayllon,
Parker A. Adams,
Joseph D. Bauer,
Jon C. Batchelder,
Tim A. Becker,
Lee A. Bernstein,
Su-Ann Chong,
Jay James,
Leo E. Kirsch,
Ka-Ngo Leung,
Eric F. Matthews,
Jonathan T. Morrell,
Paul R. Renne,
Andrew M. Rogers,
Daniel Rutte,
Andrew S. Voyles,
Karl Van Bibber,
Cory S. Waltz
Abstract:
A next-generation, high-flux DD neutron generator has been designed, commissioned, and characterized, and is now operational in a new facility at the University of California Berkeley. The generator, originally designed for 40Ar/39Ar dating of geological materials, has since served numerous additional applications, including medical isotope production studies, with others planned for the near futu…
▽ More
A next-generation, high-flux DD neutron generator has been designed, commissioned, and characterized, and is now operational in a new facility at the University of California Berkeley. The generator, originally designed for 40Ar/39Ar dating of geological materials, has since served numerous additional applications, including medical isotope production studies, with others planned for the near future. In this work, we present an overview of the High Flux Neutron Generator (HFNG) which includes a variety of simulations, analytical models, and experimental validation of results. Extensive analysis was performed in order to characterize the neutron yield, flux, and energy distribution at specific locations where samples may be loaded for irradiation. A notable design feature of the HFNG is the possibility for sample irradiation internal to the cathode, just 8 mm away from the neutron production site, thus maximizing the neutron flux (n/cm2/s). The generator's maximum neutron flux at this irradiation position is 2.58e7 n/cm2/s +/- 5% (approximately 3e8 n/s total yield) as measured via activation of small natural indium foils. However, future development is aimed at achieving an order of magnitude increase in flux. Additionally, the deuterium ion beam optics were optimized by simulations for various extraction configurations in order to achieve a uniform neutron flux distribution and an acceptable heat load. Finally, experiments were performed in order to benchmark the modeling and characterization of the HFNG.
△ Less
Submitted 9 April, 2018; v1 submitted 9 March, 2018;
originally announced March 2018.
-
On Determining Dead Layer and Detector Thicknesses for a Position-Sensitive Silicon Detector
Authors:
J. Manfredi,
Jenny Lee,
W. G. Lynch,
C. Y. Niu,
M. B. Tsang,
C. Anderson,
J. Barney,
K. W. Brown,
Z. Chajecki,
K. P. Chan,
G. Chen,
J. Estee,
Z. Li,
C. Pruitt,
A. M. Rogers,
A. Sanetullaev,
H. Setiawan,
R. Showalter,
C. Y. Tsang,
J. R. Winkelbauer,
Z. Xiao,
Z. Xu
Abstract:
In this work, two particular properties of the position-sensitive, thick silicon detectors (known as the "E" detectors) in the High Resolution Array (HiRA) are investigated: the thickness of the dead layer on the front of the detector, and the overall thickness of the detector itself. The dead layer thickness for each E detector in HiRA is extracted using a measurement of alpha particles emitted f…
▽ More
In this work, two particular properties of the position-sensitive, thick silicon detectors (known as the "E" detectors) in the High Resolution Array (HiRA) are investigated: the thickness of the dead layer on the front of the detector, and the overall thickness of the detector itself. The dead layer thickness for each E detector in HiRA is extracted using a measurement of alpha particles emitted from a $^{212}$Pb pin source placed close to the detector surface. This procedure also allows for energy calibrations of the E detectors, which are otherwise inaccessible for alpha source calibration as each one is sandwiched between two other detectors. The E detector thickness is obtained from a combination of elastically scattered protons and an energy-loss calculation method. Results from these analyses agree with values provided by the manufacturer.
△ Less
Submitted 18 January, 2018;
originally announced January 2018.
-
Van Vleck correction generalization for complex correlators with multilevel quantization
Authors:
L. V. Benkevitch,
A. E. E. Rogers,
C. J. Lonsdale,
R. J. Cappallo,
D. Oberoi,
P. J. Erickson,
K. A. V. Baker
Abstract:
Remote sensing with phased antenna arrays is based on measurement of the cross-correlations between the signals from each antenna pair. Digital correlators have systematic errors due to the quantization losses. The correlation errors allow substantial abatement based on the assumption that the analog signals are stochastic processes sampled from a statistical distribution (usually the Gaussian). T…
▽ More
Remote sensing with phased antenna arrays is based on measurement of the cross-correlations between the signals from each antenna pair. Digital correlators have systematic errors due to the quantization losses. The correlation errors allow substantial abatement based on the assumption that the analog signals are stochastic processes sampled from a statistical distribution (usually the Gaussian). The correlation correction technique is named after Van Vleck who was the first to apply it to two-level clip** quantizers. The correction is especially important for high correlation levels, e.g. in studies of solar radio emissions. We offer a generalized method that for every antenna pair inputs the quantized signals' covariance and standard deviations, and outputs high-precision estimates of the analog correlation. Although correlation correction methods have been extensively investigated in the past, there are several problems that, as far as we know, have not been published yet. We consider a very general quantization scheme with arbitrary set of transition thresholds and output levels, and our correction method is designed for correlations obtained from signals with generally unequal standard deviations. We also provide a method for estimation of the analog standard deviation from the quantized one for subsequent use in the correlation correction. We apply the correction to the the complex-valued analytic signals, overwhelmingly used in modern remote sensing systems with arrays of antennas. The approach is valid not only for analytic signals with the imaginary part being the Hilbert transform of the real one, but also for more general, circularly symmetric complex processes whose real and imaginary parts may have arbitrary relationships to each other. This work was motivated by the need for greater precision in analysis of data from the Murchison Widefield Array (MWA).
△ Less
Submitted 15 August, 2016;
originally announced August 2016.
-
One-Port Direct/Reverse Method for Characterizing VNA Calibration Standards
Authors:
Raul A. Monsalve,
Alan E. E. Rogers,
Thomas J. Mozdzen,
Judd D. Bowman
Abstract:
This paper introduces a one-port method for estimating model parameters of VNA calibration standards. The method involves measuring the standards through an asymmetrical passive network connected in direct mode and then in reverse mode, and using these measurements to compute the S-parameters of the network. The free parameters of the calibration standards are estimated by minimizing a figure of m…
▽ More
This paper introduces a one-port method for estimating model parameters of VNA calibration standards. The method involves measuring the standards through an asymmetrical passive network connected in direct mode and then in reverse mode, and using these measurements to compute the S-parameters of the network. The free parameters of the calibration standards are estimated by minimizing a figure of merit based on the expected equality of the S-parameters of the network when used in direct and reverse modes. The capabilities of the method are demonstrated through simulations, and real measurements are used to estimate the actual offset delay of a 50-$\mathbfΩ$ calibration load that is assigned zero delay by the manufacturer. The estimated delay is $38.8$ ps with a $1σ$ uncertainty of $2.1$ ps for this particular load. This result is verified through measurements of a terminated airline. The measurements agree better with theoretical models of the airline when the reference plane is calibrated using the new estimate for the load delay.
△ Less
Submitted 8 June, 2016;
originally announced June 2016.
-
Enhancing Low-Cost Ozone Spectrometers to Measure Mesospheric Winds and Tides
Authors:
O. B. Alam,
A. E. E. Rogers
Abstract:
Ground-based spectrometers have been developed to measure the concentration, velocity, and temperature of ozone in the mesosphere and lower thermosphere (MLT) using low-cost satellite television electronics to observe the 11.072 GHz spectral line of ozone. A two-channel spectrometer has been engineered to yield various performance improvements, including a doubling of the signal-to-noise ratio, im…
▽ More
Ground-based spectrometers have been developed to measure the concentration, velocity, and temperature of ozone in the mesosphere and lower thermosphere (MLT) using low-cost satellite television electronics to observe the 11.072 GHz spectral line of ozone. A two-channel spectrometer has been engineered to yield various performance improvements, including a doubling of the signal-to-noise ratio, improved data processing efficiency, and lower power consumption at 15 W. Following 2009 and 2012 observations of the seasonal and diurnal variations in ozone concentration near the mesopause, the ozone line was observed at an altitude near 95 km and latitude of 38 degrees north using three single-channel spectrometers located at the MIT Haystack Observatory (Westford, MA), Chelmsford High School (Chelmsford, MA), and Union College (Schenectady, NY) pointed south at 8 degrees. Observations from 2009 through 2014 are used to derive the nightly-averaged seasonal variation in meridional velocity, as well as the seasonally-averaged variation with local solar time. The results indicate a seasonal trend in which the winds at 95 km come from the north at about $10\,\text{m}\text{s}^{-1}$ in the summer of the northern hemisphere, and from the south at about $10\,\text{m}\text{s}^{-1}$ in the winter. Nighttime data from -5 to +5 hours local solar time show a gradual transition of the meridional wind velocity from about -$20\,\text{m}\text{s}^{-1}$ to +$20\,\text{m}\text{s}^{-1}$. These two trends correlate with nighttime wind measurements from the Millstone Hill High-Resolution Fabry-Perot Interferometer (FPI) in Westford, MA, which uses the 557.7 nm green line nightglow from atomic oxygen centered at 95 km. The results have also been compared with average meridional winds measured with meteor radar.
△ Less
Submitted 15 August, 2015; v1 submitted 4 August, 2015;
originally announced August 2015.
-
Power spectrum analysis of ionospheric fluctuations with the Murchison Widefield Array
Authors:
Shyeh T**g Loi,
Cathryn M. Trott,
Tara Murphy,
Iver H. Cairns,
Martin Bell,
Natasha Hurley-Walker,
John Morgan,
Emil Lenc,
A. R. Offringa,
L. Feng,
P. J. Hancock,
D. L. Kaplan,
N. Kudryavtseva,
G. Bernardi,
J. D. Bowman,
F. Briggs,
R. J. Cappallo,
B. E. Corey,
A. A. Deshpande,
D. Emrich,
B. M. Gaensler,
R. Goeke,
L. J. Greenhill,
B. J. Hazelton,
M. Johnston-Hollitt
, et al. (23 additional authors not shown)
Abstract:
Low-frequency, wide field-of-view (FoV) radio telescopes such as the Murchison Widefield Array (MWA) enable the ionosphere to be sampled at high spatial completeness. We present the results of the first power spectrum analysis of ionospheric fluctuations in MWA data, where we examined the position offsets of radio sources appearing in two datasets. The refractive shifts in the positions of celesti…
▽ More
Low-frequency, wide field-of-view (FoV) radio telescopes such as the Murchison Widefield Array (MWA) enable the ionosphere to be sampled at high spatial completeness. We present the results of the first power spectrum analysis of ionospheric fluctuations in MWA data, where we examined the position offsets of radio sources appearing in two datasets. The refractive shifts in the positions of celestial sources are proportional to spatial gradients in the electron column density transverse to the line of sight. These can be used to probe plasma structures and waves in the ionosphere. The regional (10-100 km) scales probed by the MWA, determined by the size of its FoV and the spatial density of radio sources (typically thousands in a single FoV), complement the global (100-1000 km) scales of GPS studies and local (0.01-1 km) scales of radar scattering measurements. Our data exhibit a range of complex structures and waves. Some fluctuations have the characteristics of travelling ionospheric disturbances (TIDs), while others take the form of narrow, slowly-drifting bands aligned along the Earth's magnetic field.
△ Less
Submitted 5 June, 2015;
originally announced June 2015.
-
Project 8: Determining neutrino mass from tritium beta decay using a frequency-based method
Authors:
P. J. Doe,
J. Kofron,
E. L. McBride,
R. G. H. Robertson,
L. J Rosenberg,
G. Rybka,
S. Doelman,
A. Rogers,
J. A. Formaggio,
D. Furse,
N. S. Oblath,
B. H. LaRoque,
M. Leber,
B. Monreal,
M. Bahr,
D. M. Asner,
A. M. Jones,
J. Fernandes,
B. A. VanDevender,
R. Patterson,
R. Bradley,
T. Thuemmler
Abstract:
A general description is given of Project 8, a new approach to measuring the neutrino mass scale via the beta decay of tritium. In Project 8, the energy of electrons emitted in beta decay is determined from the frequency of cyclotron radiation emitted as the electrons spiral in a uniform magnetic field.
A general description is given of Project 8, a new approach to measuring the neutrino mass scale via the beta decay of tritium. In Project 8, the energy of electrons emitted in beta decay is determined from the frequency of cyclotron radiation emitted as the electrons spiral in a uniform magnetic field.
△ Less
Submitted 26 September, 2013;
originally announced September 2013.
-
Tracking rare-isotope beams with microchannel plates
Authors:
A. M. Rogers,
A. Sanetullaev,
W. G. Lynch,
M. B. Tsang,
J. Lee,
D. Bazin,
D. Coupland,
V. Henzl,
D. Henzlova,
M. Kilburn,
M. S. Wallace,
M. Youngs,
F. Delaunay,
M. Famiano,
D. Shapira,
K. L. Jones,
K. T. Schmitt,
Z. Y. Sun
Abstract:
A system of two microchannel-plate detectors has been successfully implemented for tracking projectile-fragmentation beams. The detectors provide interaction positions, angles, and arrival times of ions at the reaction target. The current design is an adaptation of an assembly used for low-energy beams ($\sim$1.4 MeV/nucleon). In order to improve resolution in tracking high-energy heavy-ion beams,…
▽ More
A system of two microchannel-plate detectors has been successfully implemented for tracking projectile-fragmentation beams. The detectors provide interaction positions, angles, and arrival times of ions at the reaction target. The current design is an adaptation of an assembly used for low-energy beams ($\sim$1.4 MeV/nucleon). In order to improve resolution in tracking high-energy heavy-ion beams, the magnetic field strength between the secondary-electron accelerating foil and the microchannel plate had to be increased substantially. Results from an experiment using a 37-MeV/nucleon ${}^{56}$Ni beam show that the tracking system can achieve sub-nanosecond timing resolution and a position resolution of $\sim$1 mm for beam intensities up to $5\times10^{5}$ pps.
△ Less
Submitted 11 September, 2013;
originally announced September 2013.
-
Realisation of a low frequency SKA Precursor: The Murchison Widefield Array
Authors:
S. J. Tingay,
R. Goeke,
J. N. Hewitt,
E. Morgan,
R. A Remillard,
C. L. Williams,
J. D. Bowman,
D. Emrich,
S. M. Ord,
T. Booler,
B. Crosse,
D. Pallot,
W. Arcus,
T. Colegate,
P. J. Hall,
D. Herne,
M. J. Lynch,
F. Schlagenhaufer,
S. Tremblay,
R. B. Wayth,
M. Waterson,
D. A. Mitchell,
R. J. Sault,
R. L. Webster,
J. S. B. Wyithe
, et al. (34 additional authors not shown)
Abstract:
The Murchison Widefield Array is a low frequency (80 - 300 MHz) SKA Precursor, comprising 128 aperture array elements distributed over an area of 3 km diameter. The MWA is located at the extraordinarily radio quiet Murchison Radioastronomy Observatory in the mid-west of Western Australia, the selected home for the Phase 1 and Phase 2 SKA low frequency arrays. The MWA science goals include: 1) dete…
▽ More
The Murchison Widefield Array is a low frequency (80 - 300 MHz) SKA Precursor, comprising 128 aperture array elements distributed over an area of 3 km diameter. The MWA is located at the extraordinarily radio quiet Murchison Radioastronomy Observatory in the mid-west of Western Australia, the selected home for the Phase 1 and Phase 2 SKA low frequency arrays. The MWA science goals include: 1) detection of fluctuations in the brightness temperature of the diffuse redshifted 21 cm line of neutral hydrogen from the epoch of reionisation; 2) studies of Galactic and extragalactic processes based on deep, confusion-limited surveys of the full sky visible to the array; 3) time domain astrophysics through exploration of the variable radio sky; and 4) solar imaging and characterisation of the heliosphere and ionosphere via propagation effects on background radio source emission. This paper will focus on a brief discussion of the as-built MWA system, highlighting several novel characteristics of the instrument, and a brief progress report (as of June 2012) on the final construction phase. Practical completion of the MWA is expected in November 2012, with commissioning commencing from approximately August 2012 and operations commencing near mid 2013. A brief description of recent science results from the MWA prototype instrument is given.
△ Less
Submitted 6 December, 2012;
originally announced December 2012.
-
Searches for solar-influenced radioactive decay anomalies using Spacecraft RTGs
Authors:
D. E. Krause,
B. A. Rogers,
E. Fischbach,
J. B Buncher,
A. Ging,
J. H. Jenkins,
J. M. Longuski,
N. Strange,
P. A. Sturrock
Abstract:
Experiments showing a seasonal variation of the nuclear decay rates of a number of different nuclei, and decay anomalies apparently related to solar flares and solar rotation, have suggested that the Sun may somehow be influencing nuclear decay processes. Recently, Cooper searched for such an effect in $^{238}$Pu nuclei contained in the radioisotope thermoelectric generators (RTGs) on board the Ca…
▽ More
Experiments showing a seasonal variation of the nuclear decay rates of a number of different nuclei, and decay anomalies apparently related to solar flares and solar rotation, have suggested that the Sun may somehow be influencing nuclear decay processes. Recently, Cooper searched for such an effect in $^{238}$Pu nuclei contained in the radioisotope thermoelectric generators (RTGs) on board the Cassini spacecraft. In this paper we modify and extend Cooper's analysis to obtain constraints on anomalous decays of $^{238}$Pu over a wider range of models, but these limits cannot be applied to other nuclei if the anomaly is composition-dependent. We also show that it may require very high sensitivity for terrestrial experiments to discriminate among some models if such a decay anomaly exists, motivating the consideration of future spacecraft experiments which would require less precision.
△ Less
Submitted 31 May, 2012;
originally announced May 2012.
-
Laboratory Exercises Using the Haystack VSRT Interferometer To Teach the Basics of Aperture Synthesis
Authors:
J. M. Marr,
A. Pere,
K. Durkota,
A. E. E. Rogers,
V. Fish,
M. B. Arndt
Abstract:
We have developed a set of college level, table-top labs that can be performed with an interferometer using satellite TV electronics and compact fluorescent lamps as microwave signal sources. This interferometer, which was originally developed at the MIT Haystack Observatory as a Very Small Radio Telescope (VSRT) to observe the Sun, provides students with hands-on experience in the fundamentals of…
▽ More
We have developed a set of college level, table-top labs that can be performed with an interferometer using satellite TV electronics and compact fluorescent lamps as microwave signal sources. This interferometer, which was originally developed at the MIT Haystack Observatory as a Very Small Radio Telescope (VSRT) to observe the Sun, provides students with hands-on experience in the fundamentals of radio interferometry. These labs are easily performed and convey an intuitive sense of how combining the signals from an array of antennas reveals information about the structure of a radio source.
We have also developed a package of java programs, called "VSRTI Plotter", which is available as a free-download, to facilitate the data processing and analysis of these labs.
△ Less
Submitted 17 September, 2011;
originally announced September 2011.