-
Performance of a modular ton-scale pixel-readout liquid argon time projection chamber
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
M. Adamowski,
D. Adams,
M. Adinolfi,
C. Adriano,
A. Aduszkiewicz,
J. Aguilar,
B. Aimard,
F. Akbar,
K. Allison,
S. Alonso Monsalve,
M. Alrashed,
A. Alton,
R. Alvarez,
T. Alves,
H. Amar,
P. Amedo,
J. Anderson,
D. A. Andrade
, et al. (1340 additional authors not shown)
Abstract:
The Module-0 Demonstrator is a single-phase 600 kg liquid argon time projection chamber operated as a prototype for the DUNE liquid argon near detector. Based on the ArgonCube design concept, Module-0 features a novel 80k-channel pixelated charge readout and advanced high-coverage photon detection system. In this paper, we present an analysis of an eight-day data set consisting of 25 million cosmi…
▽ More
The Module-0 Demonstrator is a single-phase 600 kg liquid argon time projection chamber operated as a prototype for the DUNE liquid argon near detector. Based on the ArgonCube design concept, Module-0 features a novel 80k-channel pixelated charge readout and advanced high-coverage photon detection system. In this paper, we present an analysis of an eight-day data set consisting of 25 million cosmic ray events collected in the spring of 2021. We use this sample to demonstrate the imaging performance of the charge and light readout systems as well as the signal correlations between the two. We also report argon purity and detector uniformity measurements, and provide comparisons to detector simulations.
△ Less
Submitted 5 March, 2024;
originally announced March 2024.
-
Do** Liquid Argon with Xenon in ProtoDUNE Single-Phase: Effects on Scintillation Light
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
M. Adamowski,
D. Adams,
M. Adinolfi,
C. Adriano,
A. Aduszkiewicz,
J. Aguilar,
B. Aimard,
F. Akbar,
K. Allison,
S. Alonso Monsalve,
M. Alrashed,
A. Alton,
R. Alvarez,
H. Amar Es-sghir,
P. Amedo,
J. Anderson,
D. A. Andrade,
C. Andreopoulos
, et al. (1300 additional authors not shown)
Abstract:
Do** of liquid argon TPCs (LArTPCs) with a small concentration of xenon is a technique for light-shifting and facilitates the detection of the liquid argon scintillation light. In this paper, we present the results of the first do** test ever performed in a kiloton-scale LArTPC. From February to May 2020, we carried out this special run in the single-phase DUNE Far Detector prototype (ProtoDUN…
▽ More
Do** of liquid argon TPCs (LArTPCs) with a small concentration of xenon is a technique for light-shifting and facilitates the detection of the liquid argon scintillation light. In this paper, we present the results of the first do** test ever performed in a kiloton-scale LArTPC. From February to May 2020, we carried out this special run in the single-phase DUNE Far Detector prototype (ProtoDUNE-SP) at CERN, featuring 770 t of total liquid argon mass with 410 t of fiducial mass. The goal of the run was to measure the light and charge response of the detector to the addition of xenon, up to a concentration of 18.8 ppm. The main purpose was to test the possibility for reduction of non-uniformities in light collection, caused by deployment of photon detectors only within the anode planes. Light collection was analysed as a function of the xenon concentration, by using the pre-existing photon detection system (PDS) of ProtoDUNE-SP and an additional smaller set-up installed specifically for this run. In this paper we first summarize our current understanding of the argon-xenon energy transfer process and the impact of the presence of nitrogen in argon with and without xenon dopant. We then describe the key elements of ProtoDUNE-SP and the injection method deployed. Two dedicated photon detectors were able to collect the light produced by xenon and the total light. The ratio of these components was measured to be about 0.65 as 18.8 ppm of xenon were injected. We performed studies of the collection efficiency as a function of the distance between tracks and light detectors, demonstrating enhanced uniformity of response for the anode-mounted PDS. We also show that xenon do** can substantially recover light losses due to contamination of the liquid argon by nitrogen.
△ Less
Submitted 9 February, 2024; v1 submitted 2 February, 2024;
originally announced February 2024.
-
Spatially Resolved High Voltage Kelvin Probe Force Microcopy: A Novel Avenue for Examining Electrical Phenomena at Nanoscale
Authors:
Conor J. McCluskey,
Niyorjyoti Sharma,
Jesi R. Maguire,
Serene Pauly,
Andrew Rogers,
TJ Lindsay,
Kristina M. Holsgrove,
Brian J. Rodriguez,
Navneet Soin,
John Marty Gregg,
Raymond G. P. McQuaid,
Amit Kumar
Abstract:
Kelvin probe microscopy (KPFM) is a well-established scanning probe technique, used to measure surface potential accurately; it has found extensive use in the study of a range of materials phenomena. In its conventional form, KPFM frustratingly precludes imaging samples or scenarios where large surface potential exists or large surface potential gradients are created outside the typical +/-10V win…
▽ More
Kelvin probe microscopy (KPFM) is a well-established scanning probe technique, used to measure surface potential accurately; it has found extensive use in the study of a range of materials phenomena. In its conventional form, KPFM frustratingly precludes imaging samples or scenarios where large surface potential exists or large surface potential gradients are created outside the typical +/-10V window. If the potential regime measurable via KPFM could be expanded, to enable precise and reliable metrology, through a high voltage KPFM (HV-KPFM) adaptation, it could open up pathways towards a range of novel experiments, where the detection limit of regular KPFM has so far prevented the use of the technique. In this work, HV-KPFM has been realised and shown to be capable of measuring large surface potential and potential gradients with accuracy and precision. The technique has been employed to study a range of materials (positive temperature coefficient of resistivity ceramics, charge storage fluoropolymers and pyroelectrics) where accurate spatially resolved map** of surface potential within high voltage regime facilitates novel physical insight. The results demonstrate that HV-KPFM can be used as an effective tool to fill in existing gaps in surface potential measurements while also opening routes for novel studies in materials physics.
△ Less
Submitted 25 January, 2024;
originally announced January 2024.
-
Anatomical basis of sex differences in human post-myocardial infarction ECG phenotypes identified by novel automated torso-cardiac 3D reconstruction
Authors:
Hannah J. Smith,
Blanca Rodriguez,
Yuling Sang,
Marcel Beetz,
Robin Choudhury,
Vicente Grau,
Abhirup Banerjee
Abstract:
The electrocardiogram (ECG) is routinely used in cardiology, though its interpretation is confounded by anatomical variability. A novel, automated computational pipeline enables quantification of torso-ventricular anatomy metrics from magnetic resonance imaging, and comparison to ECG characteristics. Sex and myocardial infarction differences are investigated based on 1051 healthy and 425 post-MI s…
▽ More
The electrocardiogram (ECG) is routinely used in cardiology, though its interpretation is confounded by anatomical variability. A novel, automated computational pipeline enables quantification of torso-ventricular anatomy metrics from magnetic resonance imaging, and comparison to ECG characteristics. Sex and myocardial infarction differences are investigated based on 1051 healthy and 425 post-MI subjects from UK Biobank. Smaller ventricles in females explain ~50% of shorter QRS durations than in males, and contribute to lower STJ amplitudes in females (also due to more superior and posterior position). In females, torso-ventricular anatomy, particularly from larger BMI, is a stronger modulator of T wave amplitude reductions and left-deviated R axis angles in post-MI than in males. Thus, female MI phenotype is less reflective of pathology, and baseline STJ amplitudes and QRS durations are further from clinical thresholds. Therefore, quantification of anatomical sex-differences and impact on ECG in health and disease is critical to avoid clinical sex-bias.
△ Less
Submitted 21 December, 2023;
originally announced December 2023.
-
Optimizing carbon dioxide trap** for geological storage
Authors:
Jaione Tirapu Azpiroz,
Ronaldo Giro,
Rodrigo Neumann Barros Ferreira,
Marcio Nogueira Pereira da Silva,
Manuela Fernandes Blanco Rodriguez,
Adolfo E. Correa Lopez,
David A. Lazo Vasquez,
Matheus Esteves Ferreira,
Mariana Del Grande,
Ademir Ferreira Da Silva,
Mathias B. Steiner
Abstract:
Carbon dioxide (CO2) trap** in capillary networks of reservoir rocks is a pathway to long-term geological storage. At pore scale, the CO2 trap** potential depends on injection pressure, temperature, and the rock's interaction with the surrounding fluids. Modeling this interaction requires adequate representations of both capillary volume and surface. For the lack of scalable representations, h…
▽ More
Carbon dioxide (CO2) trap** in capillary networks of reservoir rocks is a pathway to long-term geological storage. At pore scale, the CO2 trap** potential depends on injection pressure, temperature, and the rock's interaction with the surrounding fluids. Modeling this interaction requires adequate representations of both capillary volume and surface. For the lack of scalable representations, however, the prediction of a rock's CO2 storage potential has been challenging. Here, we report how to represent a rock's pore space by statistically sampled capillary networks (ssCN) that preserve morphological rock characteristics. We have used the ssCN method to simulate CO2 drainage within a representative sandstone sample at reservoir pressures and temperatures, exploring intermediate- and CO2-wet conditions. This wetting regime is often neglected, despite evidence of plausibility. By raising pressure and temperature we observe increasing CO2 penetration within the capillary network. For contact angles approaching 90 degrees, the CO2 saturation exhibits a pronounced maximum reaching 80 percent of the accessible pore volume. This is about twice as high as the saturation values reported previously. For enabling validation of our results and a broader application of our methodology, we have made available the rock tomography data, the digital rock computational workflows, and the ssCN models used in this study.
△ Less
Submitted 20 December, 2023;
originally announced December 2023.
-
The DUNE Far Detector Vertical Drift Technology, Technical Design Report
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
M. Adamowski,
D. Adams,
M. Adinolfi,
C. Adriano,
A. Aduszkiewicz,
J. Aguilar,
B. Aimard,
F. Akbar,
K. Allison,
S. Alonso Monsalve,
M. Alrashed,
A. Alton,
R. Alvarez,
H. Amar,
P. Amedo,
J. Anderson,
D. A. Andrade,
C. Andreopoulos
, et al. (1304 additional authors not shown)
Abstract:
DUNE is an international experiment dedicated to addressing some of the questions at the forefront of particle physics and astrophysics, including the mystifying preponderance of matter over antimatter in the early universe. The dual-site experiment will employ an intense neutrino beam focused on a near and a far detector as it aims to determine the neutrino mass hierarchy and to make high-precisi…
▽ More
DUNE is an international experiment dedicated to addressing some of the questions at the forefront of particle physics and astrophysics, including the mystifying preponderance of matter over antimatter in the early universe. The dual-site experiment will employ an intense neutrino beam focused on a near and a far detector as it aims to determine the neutrino mass hierarchy and to make high-precision measurements of the PMNS matrix parameters, including the CP-violating phase. It will also stand ready to observe supernova neutrino bursts, and seeks to observe nucleon decay as a signature of a grand unified theory underlying the standard model.
The DUNE far detector implements liquid argon time-projection chamber (LArTPC) technology, and combines the many tens-of-kiloton fiducial mass necessary for rare event searches with the sub-centimeter spatial resolution required to image those events with high precision. The addition of a photon detection system enhances physics capabilities for all DUNE physics drivers and opens prospects for further physics explorations. Given its size, the far detector will be implemented as a set of modules, with LArTPC designs that differ from one another as newer technologies arise.
In the vertical drift LArTPC design, a horizontal cathode bisects the detector, creating two stacked drift volumes in which ionization charges drift towards anodes at either the top or bottom. The anodes are composed of perforated PCB layers with conductive strips, enabling reconstruction in 3D. Light-trap-style photon detection modules are placed both on the cryostat's side walls and on the central cathode where they are optically powered.
This Technical Design Report describes in detail the technical implementations of each subsystem of this LArTPC that, together with the other far detector modules and the near detector, will enable DUNE to achieve its physics goals.
△ Less
Submitted 5 December, 2023;
originally announced December 2023.
-
B2G4: A synthetic data pipeline for the integration of Blender models in Geant4 simulation toolkit
Authors:
Angel Bueno Rodriguez,
Felix Sattler,
Maximilian Perez Prada,
Maurice Stephan,
Sarah Barnes
Abstract:
The correctness and precision of particle physics simulation software, such as Geant4, is expected to yield results that closely align with real-world observations or well-established theoretical predictions. Notably, the accuracy of these simulated outcomes is contingent upon the software's capacity to encapsulate detailed attributes, including its prowess in generating or incorporating complex g…
▽ More
The correctness and precision of particle physics simulation software, such as Geant4, is expected to yield results that closely align with real-world observations or well-established theoretical predictions. Notably, the accuracy of these simulated outcomes is contingent upon the software's capacity to encapsulate detailed attributes, including its prowess in generating or incorporating complex geometrical constructs. While the imperatives of precision and accuracy are essential in these simulations, the need to manually code highly detailed geometries emerges as a salient bottleneck in develo** software-driven physics simulations. This research proposes Blender-to-Geant4 (B2G4), a modular data workflow that utilizes Blender to create 3D scenes, which can be exported as geometry input for Geant4. B2G4 offers a range of tools to streamline the creation of simulation scenes with multiple complex geometries and realistic material properties. Here, we demonstrate the use of B2G4 in a muon scattering tomography application to image the interior of a sealed steel structure. The modularity of B2G4 paves the way for the designed scenes and tools to be embedded not only in Geant4, but in other scientific applications or simulation software.
△ Less
Submitted 10 November, 2023;
originally announced November 2023.
-
Real-Time Measurements of Photonic Microchips with Femtometer-Scale Spectral Precision and Ultra-High Sensitivity
Authors:
Mahdi Mozdoor Dashtabi,
Mohammad Talebi Khoshmehr,
Hamed Nikbakht,
Bruno Lopez Rodriguez,
Naresh Sharma,
Iman Esmaeil Zadeh,
B. Imran Akca
Abstract:
Photonic integrated circuits (PICs) are enabling major breakthroughs in a number of areas, including quantum computing, neuromorphic processors, wearable devices, and more. Nevertheless, existing PIC measurement methods lack the spectral precision, speed, and sensitivity required for refining current applications and exploring new frontiers such as point-of-care or wearable biosensors. Here, we pr…
▽ More
Photonic integrated circuits (PICs) are enabling major breakthroughs in a number of areas, including quantum computing, neuromorphic processors, wearable devices, and more. Nevertheless, existing PIC measurement methods lack the spectral precision, speed, and sensitivity required for refining current applications and exploring new frontiers such as point-of-care or wearable biosensors. Here, we present the Swee** Optical Frequency Mixing Method (SOHO), surpassing traditional PIC measurement methods with real-time operation, 30 dB higher sensitivity, and over 100 times better spectral resolution. Leveraging the frequency mixing process with a swee** laser and custom control software, SOHO excels in simplicity, eliminating the need for advanced optical components and additional calibration procedures. We showcase its superior performance on ultrahigh-quality factor (Q) fiber-loop resonators (Q = 46M) as well as microresonators realized on a new optical waveguide platform. An experimental spectral resolution of 19.1 femtometers is demonstrated using an 85-meter-long unbalanced fiber Mach Zehnder Interferometer, constrained by noise resulting from the extended fiber length, while the theoretical resolution is calculated to be 6.2 femtometers, limited by the linewidth of the reference laser. With its excellent performance metrics, SOHO has the potential to become a vital measurement tool in photonics, excelling in high-speed and high-resolution measurements of weak optical signals.
△ Less
Submitted 8 December, 2023; v1 submitted 8 October, 2023;
originally announced October 2023.
-
Room-temperature solid-state masers as low-noise amplifiers to facilitate deep-space missions using small spacecraft
Authors:
Carlos Barbero Rodriguez
Abstract:
An increasing number of small ventures are launching missions to space with small volume satellite platforms. These small spacecraft are now being seriously considered for deep-space missions, creating a need for ground stations capable of detecting the faint signals they will transmit to Earth. Here, recent developments in room-temperature solid-state masers are reviewed to determine their readin…
▽ More
An increasing number of small ventures are launching missions to space with small volume satellite platforms. These small spacecraft are now being seriously considered for deep-space missions, creating a need for ground stations capable of detecting the faint signals they will transmit to Earth. Here, recent developments in room-temperature solid-state masers are reviewed to determine their readiness for use as a cheap low-noise amplifier for deep-space communications. Masers based on Pentacene-doped Para-terphenyl (Pc:PTP), Pentacene-doped Picene, Diazapentacene-doped Para-Terphenyl (DAP:PTP), Phenazine/1,2,4,5-Tetracyanobenzene (PNZ/TCNB) co-crystal, NV Diamond, Cuprous Oxide, and Silicon Carbide are considered for comparison. Pc:PTP offers good spin polarisation density and output power but suffers from thermal dissipation problems, DAP:PTP may help to obtain a lower threshold power than that achieved with Pentacene, PNZ/TCNB stands out in spin polarization density but has not achieved room-temperature masing, and NV Diamond is the only medium to have sustained continuous operation but has very limited power output. The other gain media proposed offer theoretical advantages but have not been tested in a working maser device.
△ Less
Submitted 25 September, 2023; v1 submitted 1 August, 2023;
originally announced August 2023.
-
Digital Twinning of the Human Ventricular Activation Sequence to Clinical 12-lead ECGs and Magnetic Resonance Imaging Using Realistic Purkinje Networks for in Silico Clinical Trials
Authors:
Julia Camps,
Lucas Arantes Berg,
Zhinuo Jenny Wang,
Rafael Sebastian,
Leto Luana Riebel,
Ruben Doste,
Xin Zhou,
Rafael Sachetto,
James Coleman,
Brodie Lawson,
Vicente Grau,
Kevin Burrage,
Alfonso Bueno-Orovio,
Rodrigo Weber,
Blanca Rodriguez
Abstract:
Cardiac in silico clinical trials can virtually assess the safety and efficacy of therapies using human-based modelling and simulation. These technologies can provide mechanistic explanations for clinically observed pathological behaviour. Designing virtual cohorts for in silico trials requires exploiting clinical data to capture the physiological variability in the human population. The clinical…
▽ More
Cardiac in silico clinical trials can virtually assess the safety and efficacy of therapies using human-based modelling and simulation. These technologies can provide mechanistic explanations for clinically observed pathological behaviour. Designing virtual cohorts for in silico trials requires exploiting clinical data to capture the physiological variability in the human population. The clinical characterisation of ventricular activation and the Purkinje network is challenging, especially non-invasively. Our study aims to present a novel digital twinning pipeline that can efficiently generate and integrate Purkinje networks into human multiscale biventricular models based on subject-specific clinical 12-lead electrocardiogram and magnetic resonance recordings. Essential novel features of the pipeline are the human-based Purkinje network generation method, personalisation considering ECG R wave progression as well as QRS morphology, and translation from reduced-order Eikonal models to equivalent biophysically-detailed monodomain ones. We demonstrate ECG simulations in line with clinical data with clinical image-based multiscale models with Purkinje in four control subjects and two hypertrophic cardiomyopathy patients (simulated and clinical QRS complexes with Pearson's correlation coefficients > 0.7). Our methods also considered possible differences in the density of Purkinje myocardial junctions in the Eikonal-based inference as regional conduction velocities. These differences translated into regional coupling effects between Purkinje and myocardial models in the monodomain formulation. In summary, we demonstrate a digital twin pipeline enabling simulations yielding clinically-consistent ECGs with clinical CMR image-based biventricular multiscale models, including personalised Purkinje in healthy and cardiac disease conditions.
△ Less
Submitted 23 June, 2023;
originally announced June 2023.
-
Total light bending in non-asymptotically flat black hole spacetimes
Authors:
Flavio C. Sánchez,
Armando A. Roque,
Benito Rodríguez,
Javier Chagoya
Abstract:
The gravitational deflection of light is a critical test of modified theories of gravity. A few years ago, Gibbons and Werner introduced a definition of the deflection angle based on the Gauss-Bonnet theorem. In more recent years, Arakida proposed a related idea for defining the deflection angle in non-asymptotically flat spacetimes. We revisit this idea and use it to compute the angular differenc…
▽ More
The gravitational deflection of light is a critical test of modified theories of gravity. A few years ago, Gibbons and Werner introduced a definition of the deflection angle based on the Gauss-Bonnet theorem. In more recent years, Arakida proposed a related idea for defining the deflection angle in non-asymptotically flat spacetimes. We revisit this idea and use it to compute the angular difference in the Kottler geometry and a non-asymptotically flat solution in Horndeski gravity. Our analytic and numerical calculations show that a triangular array of laser beams can be designed so that the proposed definition of the deflection angle is sensitive to different sources of curvature. Moreover, we find that near the photon sphere, the deflection angle in the Horndeski solution is similar to its Schwarzschild counterpart, and we confirm that the shadows seen by a static observer are identical.
△ Less
Submitted 9 December, 2023; v1 submitted 21 June, 2023;
originally announced June 2023.
-
The LHCb upgrade I
Authors:
LHCb collaboration,
R. Aaij,
A. S. W. Abdelmotteleb,
C. Abellan Beteta,
F. Abudinén,
C. Achard,
T. Ackernley,
B. Adeva,
M. Adinolfi,
P. Adlarson,
H. Afsharnia,
C. Agapopoulou,
C. A. Aidala,
Z. Ajaltouni,
S. Akar,
K. Akiba,
P. Albicocco,
J. Albrecht,
F. Alessio,
M. Alexander,
A. Alfonso Albero,
Z. Aliouche,
P. Alvarez Cartelle,
R. Amalric,
S. Amato
, et al. (1298 additional authors not shown)
Abstract:
The LHCb upgrade represents a major change of the experiment. The detectors have been almost completely renewed to allow running at an instantaneous luminosity five times larger than that of the previous running periods. Readout of all detectors into an all-software trigger is central to the new design, facilitating the reconstruction of events at the maximum LHC interaction rate, and their select…
▽ More
The LHCb upgrade represents a major change of the experiment. The detectors have been almost completely renewed to allow running at an instantaneous luminosity five times larger than that of the previous running periods. Readout of all detectors into an all-software trigger is central to the new design, facilitating the reconstruction of events at the maximum LHC interaction rate, and their selection in real time. The experiment's tracking system has been completely upgraded with a new pixel vertex detector, a silicon tracker upstream of the dipole magnet and three scintillating fibre tracking stations downstream of the magnet. The whole photon detection system of the RICH detectors has been renewed and the readout electronics of the calorimeter and muon systems have been fully overhauled. The first stage of the all-software trigger is implemented on a GPU farm. The output of the trigger provides a combination of totally reconstructed physics objects, such as tracks and vertices, ready for final analysis, and of entire events which need further offline reprocessing. This scheme required a complete revision of the computing model and rewriting of the experiment's software.
△ Less
Submitted 17 May, 2023;
originally announced May 2023.
-
Influence of Myocardial Infarction on QRS Properties: A Simulation Study
Authors:
Lei Li,
Julia Camps,
Zhinuo,
Wang,
Abhirup Banerjee,
Blanca Rodriguez,
Vicente Grau
Abstract:
The interplay between structural and electrical changes in the heart after myocardial infarction (MI) plays a key role in the initiation and maintenance of arrhythmia. The anatomical and electrophysiological properties of scar, border zone, and normal myocardium modify the electrocardiographic morphology, which is routinely analysed in clinical settings. However, the influence of various MI proper…
▽ More
The interplay between structural and electrical changes in the heart after myocardial infarction (MI) plays a key role in the initiation and maintenance of arrhythmia. The anatomical and electrophysiological properties of scar, border zone, and normal myocardium modify the electrocardiographic morphology, which is routinely analysed in clinical settings. However, the influence of various MI properties on the QRS is not intuitively predictable.In this work, we have systematically investigated the effects of 17 post-MI scenarios, varying the location, size, transmural extent, and conductive level of scarring and border zone area, on the forward-calculated QRS. Additionally, we have compared the contributions of different QRS score criteria for quantifying post-MI pathophysiology.The propagation of electrical activity in the ventricles is simulated via a Eikonal model on a unified coordinate system.The analysis has been performed on 49 subjects, and the results imply that the QRS is capable of identifying MI, suggesting the feasibility of inversely reconstructing infarct regions from QRS.There exist sensitivity variations of different QRS criteria for identifying 17 MI scenarios, which is informative for solving the inverse problem.
△ Less
Submitted 21 April, 2023; v1 submitted 4 April, 2023;
originally announced April 2023.
-
Magnetic fields inferred by Solar Orbiter: A comparison between SO/PHI-HRT and SDO/HMI
Authors:
J. Sinjan,
D. Calchetti,
J. Hirzberger,
F. Kahil,
G. Valori,
S. K. Solanki,
K. Albert,
N. Albelo Jorge,
A. Alvarez-Herrero,
T. Appourchaux,
L. R. Bellot Rubio,
J. Blanco Rodríguez,
A. Feller,
A. Gandorfer,
D. Germerott,
L. Gizon,
J. M. Gómez Cama,
L. Guerrero,
P. Gutierrez-Marques,
M. Kolleck,
A. Korpi-Lagg,
H. Michalik,
A. Moreno Vacas,
D. Orozco Suárez,
I. Pérez-Grande
, et al. (9 additional authors not shown)
Abstract:
The High Resolution Telescope (HRT) of the Polarimetric and Helioseismic Imager on board the Solar Orbiter spacecraft (SO/PHI) and the Helioseismic and Magnetic Imager (HMI) on board the Solar Dynamics Observatory (SDO) both infer the photospheric magnetic field from polarised light images. SO/PHI is the first magnetograph to move out of the Sun--Earth line and will provide unprecedented access to…
▽ More
The High Resolution Telescope (HRT) of the Polarimetric and Helioseismic Imager on board the Solar Orbiter spacecraft (SO/PHI) and the Helioseismic and Magnetic Imager (HMI) on board the Solar Dynamics Observatory (SDO) both infer the photospheric magnetic field from polarised light images. SO/PHI is the first magnetograph to move out of the Sun--Earth line and will provide unprecedented access to the Sun's poles. This provides excellent opportunities for new research wherein the magnetic field maps from both instruments are used simultaneously. We aim to compare the magnetic field maps from these two instruments and discuss any possible differences between them. We used data from both instruments obtained during Solar Orbiter's inferior conjunction on 7 March 2022. The HRT data were additionally treated for geometric distortion and degraded to the same resolution as HMI. The HMI data were re-projected to correct for the $3^{\circ}$ separation between the two observatories. SO/PHI-HRT and HMI produce remarkably similar line-of-sight magnetograms, with a slope coefficient of $0.97$, an offset below $1$ G, and a Pearson correlation coefficient of $0.97$. However, SO/PHI-HRT infers weaker line-of-sight fields for the strongest fields. As for the vector magnetic field, SO/PHI-HRT was compared to both the $720$-second and $90$-second HMI vector magnetic field: SO/PHI-HRT has a closer alignment with the $90$-second HMI vector. In the weak signal regime ($< 600$ G), SO/PHI-HRT measures stronger and more horizontal fields than HMI, very likely due to the greater noise in the SO/PHI-HRT data. In the strong field regime ($\gtrsim 600$ G), HRT infers lower field strengths but with similar inclinations (a slope of $0.92$) and azimuths (a slope of $1.02$). The slope values are from the comparison with the HMI $90$-second vector.
△ Less
Submitted 29 March, 2023;
originally announced March 2023.
-
Highly-parallelized simulation of a pixelated LArTPC on a GPU
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
M. Adamowski,
D. Adams,
M. Adinolfi,
C. Adriano,
A. Aduszkiewicz,
J. Aguilar,
Z. Ahmad,
J. Ahmed,
B. Aimard,
F. Akbar,
K. Allison,
S. Alonso Monsalve,
M. Alrashed,
C. Alt,
A. Alton,
R. Alvarez,
P. Amedo,
J. Anderson
, et al. (1282 additional authors not shown)
Abstract:
The rapid development of general-purpose computing on graphics processing units (GPGPU) is allowing the implementation of highly-parallelized Monte Carlo simulation chains for particle physics experiments. This technique is particularly suitable for the simulation of a pixelated charge readout for time projection chambers, given the large number of channels that this technology employs. Here we pr…
▽ More
The rapid development of general-purpose computing on graphics processing units (GPGPU) is allowing the implementation of highly-parallelized Monte Carlo simulation chains for particle physics experiments. This technique is particularly suitable for the simulation of a pixelated charge readout for time projection chambers, given the large number of channels that this technology employs. Here we present the first implementation of a full microphysical simulator of a liquid argon time projection chamber (LArTPC) equipped with light readout and pixelated charge readout, developed for the DUNE Near Detector. The software is implemented with an end-to-end set of GPU-optimized algorithms. The algorithms have been written in Python and translated into CUDA kernels using Numba, a just-in-time compiler for a subset of Python and NumPy instructions. The GPU implementation achieves a speed up of four orders of magnitude compared with the equivalent CPU version. The simulation of the current induced on $10^3$ pixels takes around 1 ms on the GPU, compared with approximately 10 s on the CPU. The results of the simulation are compared against data from a pixel-readout LArTPC prototype.
△ Less
Submitted 28 February, 2023; v1 submitted 19 December, 2022;
originally announced December 2022.
-
Identification and reconstruction of low-energy electrons in the ProtoDUNE-SP detector
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
M. Adamowski,
D. Adams,
M. Adinolfi,
C. Adriano,
A. Aduszkiewicz,
J. Aguilar,
Z. Ahmad,
J. Ahmed,
B. Aimard,
F. Akbar,
K. Allison,
S. Alonso Monsalve,
M. Alrashed,
C. Alt,
A. Alton,
R. Alvarez,
P. Amedo,
J. Anderson
, et al. (1235 additional authors not shown)
Abstract:
Measurements of electrons from $ν_e$ interactions are crucial for the Deep Underground Neutrino Experiment (DUNE) neutrino oscillation program, as well as searches for physics beyond the standard model, supernova neutrino detection, and solar neutrino measurements. This article describes the selection and reconstruction of low-energy (Michel) electrons in the ProtoDUNE-SP detector. ProtoDUNE-SP is…
▽ More
Measurements of electrons from $ν_e$ interactions are crucial for the Deep Underground Neutrino Experiment (DUNE) neutrino oscillation program, as well as searches for physics beyond the standard model, supernova neutrino detection, and solar neutrino measurements. This article describes the selection and reconstruction of low-energy (Michel) electrons in the ProtoDUNE-SP detector. ProtoDUNE-SP is one of the prototypes for the DUNE far detector, built and operated at CERN as a charged particle test beam experiment. A sample of low-energy electrons produced by the decay of cosmic muons is selected with a purity of 95%. This sample is used to calibrate the low-energy electron energy scale with two techniques. An electron energy calibration based on a cosmic ray muon sample uses calibration constants derived from measured and simulated cosmic ray muon events. Another calibration technique makes use of the theoretically well-understood Michel electron energy spectrum to convert reconstructed charge to electron energy. In addition, the effects of detector response to low-energy electron energy scale and its resolution including readout electronics threshold effects are quantified. Finally, the relation between the theoretical and reconstructed low-energy electron energy spectrum is derived and the energy resolution is characterized. The low-energy electron selection presented here accounts for about 75% of the total electron deposited energy. After the addition of lost energy using a Monte Carlo simulation, the energy resolution improves from about 40% to 25% at 50~MeV. These results are used to validate the expected capabilities of the DUNE far detector to reconstruct low-energy electrons.
△ Less
Submitted 31 May, 2023; v1 submitted 2 November, 2022;
originally announced November 2022.
-
Reconstruction of interactions in the ProtoDUNE-SP detector with Pandora
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
M. Adamowski,
D. Adams,
M. Adinolfi,
C. Adriano,
A. Aduszkiewicz,
J. Aguilar,
Z. Ahmad,
J. Ahmed,
B. Aimard,
F. Akbar,
B. Ali-Mohammadzadeh,
K. Allison,
S. Alonso Monsalve,
M. AlRashed,
C. Alt,
A. Alton,
R. Alvarez,
P. Amedo
, et al. (1203 additional authors not shown)
Abstract:
The Pandora Software Development Kit and algorithm libraries provide pattern-recognition logic essential to the reconstruction of particle interactions in liquid argon time projection chamber detectors. Pandora is the primary event reconstruction software used at ProtoDUNE-SP, a prototype for the Deep Underground Neutrino Experiment far detector. ProtoDUNE-SP, located at CERN, is exposed to a char…
▽ More
The Pandora Software Development Kit and algorithm libraries provide pattern-recognition logic essential to the reconstruction of particle interactions in liquid argon time projection chamber detectors. Pandora is the primary event reconstruction software used at ProtoDUNE-SP, a prototype for the Deep Underground Neutrino Experiment far detector. ProtoDUNE-SP, located at CERN, is exposed to a charged-particle test beam. This paper gives an overview of the Pandora reconstruction algorithms and how they have been tailored for use at ProtoDUNE-SP. In complex events with numerous cosmic-ray and beam background particles, the simulated reconstruction and identification efficiency for triggered test-beam particles is above 80% for the majority of particle type and beam momentum combinations. Specifically, simulated 1 GeV/$c$ charged pions and protons are correctly reconstructed and identified with efficiencies of 86.1$\pm0.6$% and 84.1$\pm0.6$%, respectively. The efficiencies measured for test-beam data are shown to be within 5% of those predicted by the simulation.
△ Less
Submitted 17 July, 2023; v1 submitted 29 June, 2022;
originally announced June 2022.
-
Separation of track- and shower-like energy deposits in ProtoDUNE-SP using a convolutional neural network
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
M. Adamowski,
D. Adams,
M. Adinolfi,
A. Aduszkiewicz,
J. Aguilar,
Z. Ahmad,
J. Ahmed,
B. Aimard,
B. Ali-Mohammadzadeh,
T. Alion,
K. Allison,
S. Alonso Monsalve,
M. AlRashed,
C. Alt,
A. Alton,
R. Alvarez,
P. Amedo,
J. Anderson
, et al. (1204 additional authors not shown)
Abstract:
Liquid argon time projection chamber detector technology provides high spatial and calorimetric resolutions on the charged particles traversing liquid argon. As a result, the technology has been used in a number of recent neutrino experiments, and is the technology of choice for the Deep Underground Neutrino Experiment (DUNE). In order to perform high precision measurements of neutrinos in the det…
▽ More
Liquid argon time projection chamber detector technology provides high spatial and calorimetric resolutions on the charged particles traversing liquid argon. As a result, the technology has been used in a number of recent neutrino experiments, and is the technology of choice for the Deep Underground Neutrino Experiment (DUNE). In order to perform high precision measurements of neutrinos in the detector, final state particles need to be effectively identified, and their energy accurately reconstructed. This article proposes an algorithm based on a convolutional neural network to perform the classification of energy deposits and reconstructed particles as track-like or arising from electromagnetic cascades. Results from testing the algorithm on data from ProtoDUNE-SP, a prototype of the DUNE far detector, are presented. The network identifies track- and shower-like particles, as well as Michel electrons, with high efficiency. The performance of the algorithm is consistent between data and simulation.
△ Less
Submitted 30 June, 2022; v1 submitted 31 March, 2022;
originally announced March 2022.
-
Scintillation light detection in the 6-m drift-length ProtoDUNE Dual Phase liquid argon TPC
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
M. Adamowski,
D. Adams,
M. Adinolfi,
A. Aduszkiewicz,
J. Aguilar,
Z. Ahmad,
J. Ahmed,
B. Aimard,
B. Ali-Mohammadzadeh,
T. Alion,
K. Allison,
S. Alonso Monsalve,
M. AlRashed,
C. Alt,
A. Alton,
R. Alvarez,
P. Amedo,
J. Anderson
, et al. (1202 additional authors not shown)
Abstract:
DUNE is a dual-site experiment for long-baseline neutrino oscillation studies, neutrino astrophysics and nucleon decay searches. ProtoDUNE Dual Phase (DP) is a 6x6x6m3 liquid argon time-projection-chamber (LArTPC) that recorded cosmic-muon data at the CERN Neutrino Platform in 2019-2020 as a prototype of the DUNE Far Detector. Charged particles propagating through the LArTPC produce ionization and…
▽ More
DUNE is a dual-site experiment for long-baseline neutrino oscillation studies, neutrino astrophysics and nucleon decay searches. ProtoDUNE Dual Phase (DP) is a 6x6x6m3 liquid argon time-projection-chamber (LArTPC) that recorded cosmic-muon data at the CERN Neutrino Platform in 2019-2020 as a prototype of the DUNE Far Detector. Charged particles propagating through the LArTPC produce ionization and scintillation light. The scintillation light signal in these detectors can provide the trigger for non-beam events. In addition, it adds precise timing capabilities and improves the calorimetry measurements. In ProtoDUNE-DP, scintillation and electroluminescence light produced by cosmic muons in the LArTPC is collected by photomultiplier tubes placed up to 7 m away from the ionizing track. In this paper, the ProtoDUNE-DP photon detection system performance is evaluated with a particular focus on the different wavelength shifters, such as PEN and TPB, and the use of Xe-doped LAr, considering its future use in giant LArTPCs. The scintillation light production and propagation processes are analyzed and a comparison of simulation to data is performed, improving understanding of the liquid argon properties
△ Less
Submitted 3 June, 2022; v1 submitted 30 March, 2022;
originally announced March 2022.
-
The magnetic drivers of campfires seen by the Polarimetric and Helioseismic Imager (PHI) on Solar Orbiter
Authors:
F. Kahil,
J. Hirzberger,
S. K. Solanki,
L. P. Chitta,
H. Peter,
F. Auchère,
J. Sinjan,
D. Orozco Suárez,
K. Albert,
N. Albelo Jorge,
T. Appourchaux,
A. Alvarez-Herrero,
J. Blanco Rodríguez,
A. Gandorfer,
D. Germerott,
L. Guerrero,
P. Gutiérrez Márquez,
M. Kolleck,
J. C. del Toro Iniesta,
R. Volkmer,
J. Woch,
B. Fiethe,
J. M. Gómez Cama,
I. Pérez-Grande,
E. Sanchis Kilders
, et al. (34 additional authors not shown)
Abstract:
The Extreme Ultraviolet Imager (EUI) on board the Solar Orbiter (SO) spacecraft observed small extreme ultraviolet (EUV) bursts, termed campfires, that have been proposed to be brightenings near the apexes of low-lying loops in the quiet-Sun atmosphere. The underlying magnetic processes driving these campfires are not understood. During the cruise phase of SO and at a distance of 0.523\,AU from th…
▽ More
The Extreme Ultraviolet Imager (EUI) on board the Solar Orbiter (SO) spacecraft observed small extreme ultraviolet (EUV) bursts, termed campfires, that have been proposed to be brightenings near the apexes of low-lying loops in the quiet-Sun atmosphere. The underlying magnetic processes driving these campfires are not understood. During the cruise phase of SO and at a distance of 0.523\,AU from the Sun, the Polarimetric and Helioseismic Imager on Solar Orbiter (SO/PHI) observed a quiet-Sun region jointly with SO/EUI, offering the possibility to investigate the surface magnetic field dynamics underlying campfires at a spatial resolution of about 380~km.
In 71\% of the 38 isolated events, campfires are confined between bipolar magnetic features, which seem to exhibit signatures of magnetic flux cancellation. The flux cancellation occurs either between the two main footpoints, or between one of the footpoints of the loop housing the campfire and a nearby opposite polarity patch. In one particularly clear-cut case, we detected the emergence of a small-scale magnetic loop in the internetwork followed soon afterwards by a campfire brightening adjacent to the location of the linear polarisation signal in the photosphere, that is to say near where the apex of the emerging loop lays. The rest of the events were observed over small scattered magnetic features, which could not be identified as magnetic footpoints of the campfire hosting loops. The majority of campfires could be driven by magnetic reconnection triggered at the footpoints, similar to the physical processes occurring in the burst-like EUV events discussed in the literature. About a quarter of all analysed campfires, however, are not associated to such magnetic activity in the photosphere, which implies that other heating mechanisms are energising these small-scale EUV brightenings.
△ Less
Submitted 28 February, 2022;
originally announced February 2022.
-
Denoising Convolutional Networks to Accelerate Detector Simulation
Authors:
Sunanda Banerjee,
Brian Cruz Rodriguez,
Lena Franklin,
Harold Guerrero De La Cruz,
Tara Leininger,
Scarlet Norberg,
Kevin Pedro,
Angel Rosado Trinidad,
Yiheng Ye
Abstract:
The high accuracy of detector simulation is crucial for modern particle physics experiments. However, this accuracy comes with a high computational cost, which will be exacerbated by the large datasets and complex detector upgrades associated with next-generation facilities such as the High Luminosity LHC. We explore the viability of regression-based machine learning (ML) approaches using convolut…
▽ More
The high accuracy of detector simulation is crucial for modern particle physics experiments. However, this accuracy comes with a high computational cost, which will be exacerbated by the large datasets and complex detector upgrades associated with next-generation facilities such as the High Luminosity LHC. We explore the viability of regression-based machine learning (ML) approaches using convolutional neural networks (CNNs) to "denoise" faster, lower-quality detector simulations, augmenting them to produce a higher-quality final result with a reduced computational burden. The denoising CNN works in concert with classical detector simulation software rather than replacing it entirely, increasing its reliability compared to other ML approaches to simulation. We obtain promising results from a prototype based on photon showers in the CMS electromagnetic calorimeter. Future directions are also discussed.
△ Less
Submitted 10 February, 2022;
originally announced February 2022.
-
Low exposure long-baseline neutrino oscillation sensitivity of the DUNE experiment
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
D. Adams,
M. Adinolfi,
A. Aduszkiewicz,
J. Aguilar,
Z. Ahmad,
J. Ahmed,
B. Aimard,
B. Ali-Mohammadzadeh,
T. Alion,
K. Allison,
S. Alonso Monsalve,
M. AlRashed,
C. Alt,
A. Alton,
P. Amedo,
J. Anderson,
C. Andreopoulos,
M. Andreotti
, et al. (1132 additional authors not shown)
Abstract:
The Deep Underground Neutrino Experiment (DUNE) will produce world-leading neutrino oscillation measurements over the lifetime of the experiment. In this work, we explore DUNE's sensitivity to observe charge-parity violation (CPV) in the neutrino sector, and to resolve the mass ordering, for exposures of up to 100 kiloton-megawatt-years (kt-MW-yr). The analysis includes detailed uncertainties on t…
▽ More
The Deep Underground Neutrino Experiment (DUNE) will produce world-leading neutrino oscillation measurements over the lifetime of the experiment. In this work, we explore DUNE's sensitivity to observe charge-parity violation (CPV) in the neutrino sector, and to resolve the mass ordering, for exposures of up to 100 kiloton-megawatt-years (kt-MW-yr). The analysis includes detailed uncertainties on the flux prediction, the neutrino interaction model, and detector effects. We demonstrate that DUNE will be able to unambiguously resolve the neutrino mass ordering at a 3$σ$ (5$σ$) level, with a 66 (100) kt-MW-yr far detector exposure, and has the ability to make strong statements at significantly shorter exposures depending on the true value of other oscillation parameters. We also show that DUNE has the potential to make a robust measurement of CPV at a 3$σ$ level with a 100 kt-MW-yr exposure for the maximally CP-violating values $δ_{\rm CP}} = \pmπ/2$. Additionally, the dependence of DUNE's sensitivity on the exposure taken in neutrino-enhanced and antineutrino-enhanced running is discussed. An equal fraction of exposure taken in each beam mode is found to be close to optimal when considered over the entire space of interest.
△ Less
Submitted 3 September, 2021;
originally announced September 2021.
-
Design, construction and operation of the ProtoDUNE-SP Liquid Argon TPC
Authors:
DUNE Collaboration,
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
M. R. Adames,
G. Adamov,
D. Adams,
M. Adinolfi,
A. Aduszkiewicz,
J. Aguilar,
Z. Ahmad,
J. Ahmed,
B. Ali-Mohammadzadeh,
T. Alion,
K. Allison,
S. Alonso Monsalve,
M. Alrashed,
C. Alt,
A. Alton,
P. Amedo,
J. Anderson,
C. Andreopoulos,
M. Andreotti,
M. P. Andrews
, et al. (1158 additional authors not shown)
Abstract:
The ProtoDUNE-SP detector is a single-phase liquid argon time projection chamber (LArTPC) that was constructed and operated in the CERN North Area at the end of the H4 beamline. This detector is a prototype for the first far detector module of the Deep Underground Neutrino Experiment (DUNE), which will be constructed at the Sandford Underground Research Facility (SURF) in Lead, South Dakota, USA.…
▽ More
The ProtoDUNE-SP detector is a single-phase liquid argon time projection chamber (LArTPC) that was constructed and operated in the CERN North Area at the end of the H4 beamline. This detector is a prototype for the first far detector module of the Deep Underground Neutrino Experiment (DUNE), which will be constructed at the Sandford Underground Research Facility (SURF) in Lead, South Dakota, USA. The ProtoDUNE-SP detector incorporates full-size components as designed for DUNE and has an active volume of $7\times 6\times 7.2$~m$^3$. The H4 beam delivers incident particles with well-measured momenta and high-purity particle identification. ProtoDUNE-SP's successful operation between 2018 and 2020 demonstrates the effectiveness of the single-phase far detector design. This paper describes the design, construction, assembly and operation of the detector components.
△ Less
Submitted 23 September, 2021; v1 submitted 4 August, 2021;
originally announced August 2021.
-
A Comparison of CPU and GPU implementations for the LHCb Experiment Run 3 Trigger
Authors:
R. Aaij,
M. Adinolfi,
S. Aiola,
S. Akar,
J. Albrecht,
M. Alexander,
S. Amato,
Y. Amhis,
F. Archilli,
M. Bala,
G. Bassi,
L. Bian,
M. P. Blago,
T. Boettcher,
A. Boldyrev,
S. Borghi,
A. Brea Rodriguez,
L. Calefice,
M. Calvo Gomez,
D. H. Cámpora Pérez,
A. Cardini,
M. Cattaneo,
V. Chobanova,
G. Ciezarek,
X. Cid Vidal
, et al. (135 additional authors not shown)
Abstract:
The LHCb experiment at CERN is undergoing an upgrade in preparation for the Run 3 data taking period of the LHC. As part of this upgrade the trigger is moving to a fully software implementation operating at the LHC bunch crossing rate. We present an evaluation of a CPU-based and a GPU-based implementation of the first stage of the High Level Trigger. After a detailed comparison both options are fo…
▽ More
The LHCb experiment at CERN is undergoing an upgrade in preparation for the Run 3 data taking period of the LHC. As part of this upgrade the trigger is moving to a fully software implementation operating at the LHC bunch crossing rate. We present an evaluation of a CPU-based and a GPU-based implementation of the first stage of the High Level Trigger. After a detailed comparison both options are found to be viable. This document summarizes the performance and implementation details of these options, the outcome of which has led to the choice of the GPU-based implementation as the baseline.
△ Less
Submitted 4 January, 2022; v1 submitted 9 May, 2021;
originally announced May 2021.
-
Deep Underground Neutrino Experiment (DUNE) Near Detector Conceptual Design Report
Authors:
A. Abed Abud,
B. Abi,
R. Acciarri,
M. A. Acero,
G. Adamov,
D. Adams,
M. Adinolfi,
A. Aduszkiewicz,
Z. Ahmad,
J. Ahmed,
T. Alion,
S. Alonso Monsalve,
M. Alrashed,
C. Alt,
A. Alton,
P. Amedo,
J. Anderson,
C. Andreopoulos,
M. P. Andrews,
F. Andrianala,
S. Andringa,
N. Anfimov,
A. Ankowski,
M. Antonova,
S. Antusch
, et al. (1041 additional authors not shown)
Abstract:
This report describes the conceptual design of the DUNE near detector
This report describes the conceptual design of the DUNE near detector
△ Less
Submitted 25 March, 2021;
originally announced March 2021.
-
Real-time Multi-Task Diffractive Deep Neural Networks via Hardware-Software Co-design
Authors:
Yingjie Li,
Ruiyang Chen,
Berardi Sensale Rodriguez,
Weilu Gao,
Cunxi Yu
Abstract:
Deep neural networks (DNNs) have substantial computational requirements, which greatly limit their performance in resource-constrained environments. Recently, there are increasing efforts on optical neural networks and optical computing based DNNs hardware, which bring significant advantages for deep learning systems in terms of their power efficiency, parallelism and computational speed. Among th…
▽ More
Deep neural networks (DNNs) have substantial computational requirements, which greatly limit their performance in resource-constrained environments. Recently, there are increasing efforts on optical neural networks and optical computing based DNNs hardware, which bring significant advantages for deep learning systems in terms of their power efficiency, parallelism and computational speed. Among them, free-space diffractive deep neural networks (D$^2$NNs) based on the light diffraction, feature millions of neurons in each layer interconnected with neurons in neighboring layers. However, due to the challenge of implementing reconfigurability, deploying different DNNs algorithms requires re-building and duplicating the physical diffractive systems, which significantly degrades the hardware efficiency in practical application scenarios. Thus, this work proposes a novel hardware-software co-design method that enables robust and noise-resilient Multi-task Learning in D$^2$NNs. Our experimental results demonstrate significant improvements in versatility and hardware efficiency, and also demonstrate the robustness of proposed multi-task D$^2$NN architecture under wide noise ranges of all system components. In addition, we propose a domain-specific regularization algorithm for training the proposed multi-task architecture, which can be used to flexibly adjust the desired performance for each task.
△ Less
Submitted 1 April, 2021; v1 submitted 16 December, 2020;
originally announced December 2020.
-
Calibration of the momentum scale of a particle physics detector using the Armenteros-Podolanski plot
Authors:
Pablo Baladrón Rodríguez,
Veronika Chobanova,
Xabier Cid Vidal,
Vladimir Gligorov,
Miriam Lucio Martínez,
Jovan Markov,
Diego Martínez Santos,
Máximo Pló Casasús
Abstract:
A method for calibrating the momentum scale in a particle physics detector is described. The method relies on the determination of the masses of the final state particles in two-body decays of neutral particles, which can then be used to obtain corrections in the momentum scale. A modified version of the Armenteros-Podolanski plot and the $K_S^0 \to π^+ π^-$ decay is used as a proof of principle f…
▽ More
A method for calibrating the momentum scale in a particle physics detector is described. The method relies on the determination of the masses of the final state particles in two-body decays of neutral particles, which can then be used to obtain corrections in the momentum scale. A modified version of the Armenteros-Podolanski plot and the $K_S^0 \to π^+ π^-$ decay is used as a proof of principle for this method.
△ Less
Submitted 26 January, 2021; v1 submitted 7 December, 2020;
originally announced December 2020.
-
Efficient Facemask Sterilization via Forced Ozone Convection
Authors:
Joseph Schwan,
Troy R. Alva,
Giorgio Nava,
Carla Berrospe Rodriguez,
Justin W. Chartron,
Joshua Morgan,
Lorenzo Mangolini
Abstract:
During the beginning of 2020, the Covid-19 pandemic took the world by surprise, rapidly spreading undetected between and within many countries and wreaking havoc on the global economy both through death tolls and lockdowns. Healthcare professionals treating the coronavirus patients grapple with a massive and unprecedented shortage of Facepiece Respirators (FPRs) and other personal protective equip…
▽ More
During the beginning of 2020, the Covid-19 pandemic took the world by surprise, rapidly spreading undetected between and within many countries and wreaking havoc on the global economy both through death tolls and lockdowns. Healthcare professionals treating the coronavirus patients grapple with a massive and unprecedented shortage of Facepiece Respirators (FPRs) and other personal protective equipment (PPE), which act as fundamental tools to protect the health of the medical staff treating the patients affected by the coronavirus. While many FPRs are designed to be disposable single-use devices, the development of sterilization strategies is necessary to circumvent future shortages. Here, we describe the development of a plasma-based method to sterilize PPE such as FPRs with ozone. The novel design uses a flow-through configuration where ozone directly flows through the fibers of the PPE through the maintenance of a pressure gradient. Canonical ozone-based methods place the mask into a sealed ozone-containing enclosure but lack pressurization to permeate the mask fibers. In this device, ozone is created through an atmospheric pressure Dielectric Barrier Discharge (DBD) fed with compressed air. Due to limited supply and clinical need of FPRs, we demonstrated sterilization with surgical masks. We demonstrate rapid sterilization using E. coli as a model pathogen. A flow-through configuration enables a >400% improvement of the sterilization efficiency with respect to the canonical approach. This method has potential for a broad and cost-effective utilization. Using the power supply from a readily available plasma ball toy, a plastic box, a glass tube, steel mesh, and 3D printed components, we designed and tested an extremely affordable portable prototype system for rapid single mask sterilization which produced comparable results to its large high-cost equivalent.
△ Less
Submitted 17 July, 2020;
originally announced July 2020.
-
An inverse designed achromatic flat lens operating in the ultraviolet
Authors:
Sourangsu Banerji,
Berardi Sensale Rodriguez
Abstract:
We demonstrate an inverse designed achromatic, flat, polarization-insensitive diffractive optic element, i.e., multilevel diffractive lens (MDL), operating across a broadband range of UV light (250 nm - 400 nm) via numerical simulations. The simulated average on-axis focusing efficiency of the MDL is optimized to be as high as ~86%. We also investigate the off-axis focusing characteristics at diff…
▽ More
We demonstrate an inverse designed achromatic, flat, polarization-insensitive diffractive optic element, i.e., multilevel diffractive lens (MDL), operating across a broadband range of UV light (250 nm - 400 nm) via numerical simulations. The simulated average on-axis focusing efficiency of the MDL is optimized to be as high as ~86%. We also investigate the off-axis focusing characteristics at different incident angles of the incoming UV radiation such that the MDL has a full field of view of 30 degrees. The simulated average off-axis focusing efficiency is ~67%, which is the highest reported till date for any chromatic or achromatic UV metalens or diffractive lens to the best of our knowledge. The designed MDL is composed of silicon nitride. The work reported herein will be useful for the miniaturization and integration of lightweight and compact UV optical systems.
△ Less
Submitted 28 June, 2020; v1 submitted 17 June, 2020;
originally announced June 2020.
-
A One-Shot Learning Framework for Assessment of Fibrillar Collagen from Second Harmonic Generation Images of an Infarcted Myocardium
Authors:
Qun Liu,
Supratik Mukhopadhyay,
Maria Ximena Bastidas Rodriguez,
Xing Fu,
Sushant Sahu,
David Burk,
Manas Gartia
Abstract:
Myocardial infarction (MI) is a scientific term that refers to heart attack. In this study, we infer highly relevant second harmonic generation (SHG) cues from collagen fibers exhibiting highly non-centrosymmetric assembly together with two-photon excited cellular autofluorescence in infarcted mouse heart to quantitatively probe fibrosis, especially targeted at an early stage after MI. We present…
▽ More
Myocardial infarction (MI) is a scientific term that refers to heart attack. In this study, we infer highly relevant second harmonic generation (SHG) cues from collagen fibers exhibiting highly non-centrosymmetric assembly together with two-photon excited cellular autofluorescence in infarcted mouse heart to quantitatively probe fibrosis, especially targeted at an early stage after MI. We present a robust one-shot machine learning algorithm that enables determination of 2D assembly of collagen with high spatial resolution along with its structural arrangement in heart tissues post-MI with spectral specificity and sensitivity. Detection, evaluation, and precise quantification of fibrosis extent at early stage would guide one to develop treatment therapies that may prevent further progression and determine heart transplant needs for patient survival.
△ Less
Submitted 29 January, 2020; v1 submitted 23 January, 2020;
originally announced January 2020.
-
Allen: A high level trigger on GPUs for LHCb
Authors:
R. Aaij,
J. Albrecht,
M. Belous,
P. Billoir,
T. Boettcher,
A. Brea Rodríguez,
D. vom Bruch,
D. H. Cámpora Pérez,
A. Casais Vidal,
D. C. Craik,
P. Fernandez Declara,
L. Funke,
V. V. Gligorov,
B. Jashal,
N. Kazeev,
D. Martínez Santos,
F. Pisani,
D. Pliushchenko,
S. Popov,
R. Quagliani,
M. Rangel,
F. Reiss,
C. Sánchez Mayordomo,
R. Schwemmer,
M. Sokoloff
, et al. (4 additional authors not shown)
Abstract:
We describe a fully GPU-based implementation of the first level trigger for the upgrade of the LHCb detector, due to start data taking in 2021. We demonstrate that our implementation, named Allen, can process the 40 Tbit/s data rate of the upgraded LHCb detector and perform a wide variety of pattern recognition tasks. These include finding the trajectories of charged particles, finding proton-prot…
▽ More
We describe a fully GPU-based implementation of the first level trigger for the upgrade of the LHCb detector, due to start data taking in 2021. We demonstrate that our implementation, named Allen, can process the 40 Tbit/s data rate of the upgraded LHCb detector and perform a wide variety of pattern recognition tasks. These include finding the trajectories of charged particles, finding proton-proton collision points, identifying particles as hadrons or muons, and finding the displaced decay vertices of long-lived particles. We further demonstrate that Allen can be implemented in around 500 scientific or consumer GPU cards, that it is not I/O bound, and can be operated at the full LHC collision rate of 30 MHz. Allen is the first complete high-throughput GPU trigger proposed for a HEP experiment.
△ Less
Submitted 12 May, 2020; v1 submitted 19 December, 2019;
originally announced December 2019.
-
Machine-learning enables Image Reconstruction and Classification in a "see-through" camera
Authors:
Zhimeng Pan,
Brian Rodriguez,
Rajesh Menon
Abstract:
We demonstrate that image reconstruction can be achieved via a convolutional neural network for a "see-through" computational camera comprised of a transparent window and a CMOS image sensor. Furthermore, we compared classification results using a classifier network for the raw sensor data vs the reconstructed images. The results suggest that similar classification accuracy is likely possible in b…
▽ More
We demonstrate that image reconstruction can be achieved via a convolutional neural network for a "see-through" computational camera comprised of a transparent window and a CMOS image sensor. Furthermore, we compared classification results using a classifier network for the raw sensor data vs the reconstructed images. The results suggest that similar classification accuracy is likely possible in both cases with appropriate network optimizations. All networks were trained and tested for the MNIST (6 classes), EMNIST and the Kanji49 datasets.
△ Less
Submitted 25 August, 2019;
originally announced August 2019.
-
Cross-validation tests for cryo-EM maps using an independent particle set
Authors:
Sebastian Ortiz,
Luka Stanisic,
Boris A Rodriguez,
Markus Rampp,
Gerhard Hummer,
Pilar Cossio
Abstract:
Cryo-electron microscopy is a revolutionary technique that can provide 3D density maps at near-atomic resolution. However, map validation is still an open issue in the field. Despite several efforts from the community, it is possible to overfit the reconstructions to noisy data. Here, inspired by modern statistics, we develop a novel methodology that uses a small independent particle set to valida…
▽ More
Cryo-electron microscopy is a revolutionary technique that can provide 3D density maps at near-atomic resolution. However, map validation is still an open issue in the field. Despite several efforts from the community, it is possible to overfit the reconstructions to noisy data. Here, inspired by modern statistics, we develop a novel methodology that uses a small independent particle set to validate the 3D maps. The main idea is to monitor how the map probability evolves over the control set during the refinement. The method is complementary to the gold-standard procedure, which generates two reconstructions at each iteration. We low-pass filter the two reconstructions for different frequency cutoffs, and we calculate the probability of each filtered map given the control set. For high-quality maps, the probability should increase as a function of the frequency cutoff and of the refinement iteration. We also compute the similarity between the probability distributions of the two reconstructions. As higher frequencies are added to the maps, more dissimilar are the distributions. We optimized the BioEM software package to perform these calculations, and tested the method on several systems, some which were overfitted. Our results show that our method is able to discriminate the overfitted sets from the non-overfitted ones. We conclude that having a control particle set, not used for the refinement, is essential for cross-validating cryo-EM maps.
△ Less
Submitted 2 August, 2019;
originally announced August 2019.
-
A Quantum Extension of the Semiclassical Theory of Electrical Susceptibility
Authors:
Jairo David García,
Boris A. Rodríguez
Abstract:
It is shown here how the semiclassical theory of electrical susceptibility can be extended to the case in which both radiation and matter are quantized. This is done specifically for the cases of linear and second order susceptibilities. The expressions derived allow to determine a set of conditions for the validity of the semiclassical approximation and predict interesting new phenomena such as p…
▽ More
It is shown here how the semiclassical theory of electrical susceptibility can be extended to the case in which both radiation and matter are quantized. This is done specifically for the cases of linear and second order susceptibilities. The expressions derived allow to determine a set of conditions for the validity of the semiclassical approximation and predict interesting new phenomena such as photon number dependent susceptibility.
△ Less
Submitted 31 May, 2018;
originally announced May 2018.
-
Lifetime Testing 700 MHz RF Windows for the Accelerator Production of Tritium Program
Authors:
K. A. Cummings,
M. D. Borrego,
J. DeBaca,
J. S. Harrison,
M. B. Rodriguez,
D. M. Roybal,
W. T. Roybal,
S. C. Ruggles,
P. A. Torrez,
G. D. White
Abstract:
Radio frequency (RF) windows are historically a point where failure occurs in input-power couplers for accelerators. To understand more about the reliability of high power RF windows, lifetime testing was done on 700 MHz coaxial RF windows for the Low Energy Demonstration Accelerator (LEDA) project of the Accelerator Production of Tritium (APT) program. The RF windows, made by Marconi Applied Te…
▽ More
Radio frequency (RF) windows are historically a point where failure occurs in input-power couplers for accelerators. To understand more about the reliability of high power RF windows, lifetime testing was done on 700 MHz coaxial RF windows for the Low Energy Demonstration Accelerator (LEDA) project of the Accelerator Production of Tritium (APT) program. The RF windows, made by Marconi Applied Technologies (formerly EEV), were tested at 800 kW for an extended period of time. Changes in the reflected power, vacuum, air outlet temperature, and surface temperature were monitored over time. The results of the life testing are summarized.
△ Less
Submitted 21 August, 2000; v1 submitted 14 August, 2000;
originally announced August 2000.