-
Near subsonic solar wind outflow from an active region
Authors:
Tamar Ervin,
Stuart D. Bale,
Samuel T. Badman,
Trevor A. Bowen,
Pete Riley,
Kristoff Paulson,
Yeimy J. Rivera,
Orlando Romeo,
Nikos Sioulas,
Davin E. Larson,
Jaye L. Verniero,
Ryan M. Dewey,
Jia Huang
Abstract:
During Parker Solar Probe (Parker) Encounter 15 (E15), we observe an 18-hour period of near subsonic ($\mathrm{M_S \sim}$ 1) and sub-Alfvénic (SA), $\mathrm{M_A}$ <<< 1, slow speed solar wind from 22 to 15.6 R$_\odot$. As the most extreme SA interval measured to date and skirting the solar wind sonic point, it is the deepest Parker has probed into the formation and acceleration region of the solar…
▽ More
During Parker Solar Probe (Parker) Encounter 15 (E15), we observe an 18-hour period of near subsonic ($\mathrm{M_S \sim}$ 1) and sub-Alfvénic (SA), $\mathrm{M_A}$ <<< 1, slow speed solar wind from 22 to 15.6 R$_\odot$. As the most extreme SA interval measured to date and skirting the solar wind sonic point, it is the deepest Parker has probed into the formation and acceleration region of the solar wind in the corona. The stream is also measured by Wind and MMS near 1AU at times consistent with ballistic propagation of this slow stream. We investigate the stream source, properties and potential coronal heating consequences via combining these observations with coronal modeling and turbulence analysis. Through source map**, in situ evidence and multi-point arrival time considerations of a candidate CME, we determine the stream is a steady (non-transient), long-lived and approximately Parker spiral aligned and arises from overexpanded field lines map** back to an active region. Turbulence analysis of the Elsässer variables shows the inertial range scaling of the $\mathrm{\mathbf{z}^{+}}$ mode ($\mathrm{f \sim ^{-3/2}}$) to be dominated by the slab component. We discuss the spectral flattening and difficulties associated with measuring the $\mathrm{\mathbf{z}^{-}}$ spectra, cautioning against making definitive conclusions from the $\mathrm{\mathbf{z}^{-}}$ mode. Despite being more extreme than prior sub-Alfvénic intervals, its turbulent nature does not appear to be qualitatively different from previously observed streams. We conclude that this extreme low dynamic pressure solar wind interval (which has the potential for extreme space weather conditions) is a large, steady structure spanning at least to 1AU.
△ Less
Submitted 24 May, 2024;
originally announced May 2024.
-
On the Mesoscale Structure of CMEs at Mercury's Orbit: BepiColombo and Parker Solar Probe Observations
Authors:
Erika Palmerio,
Fernando Carcaboso,
Leng Ying Khoo,
Tarik M. Salman,
Beatriz Sánchez-Cano,
Benjamin J. Lynch,
Yeimy J. Rivera,
Sanchita Pal,
Teresa Nieves-Chinchilla,
Andreas J. Weiss,
David Lario,
Johannes Z. D. Mieth,
Daniel Heyner,
Michael L. Stevens,
Orlando M. Romeo,
Andrei N. Zhukov,
Luciano Rodriguez,
Christina O. Lee,
Christina M. S. Cohen,
Laura Rodríguez-García,
Phyllis L. Whittlesey,
Nina Dresing,
Philipp Oleynik,
Immanuel C. Jebaraj,
David Fischer
, et al. (5 additional authors not shown)
Abstract:
On 2022 February 15, an impressive filament eruption was observed off the solar eastern limb from three remote-sensing viewpoints, namely Earth, STEREO-A, and Solar Orbiter. In addition to representing the most-distant observed filament at extreme ultraviolet wavelengths -- captured by Solar Orbiter's field of view extending to above 6 $R_{\odot}$ -- this event was also associated with the release…
▽ More
On 2022 February 15, an impressive filament eruption was observed off the solar eastern limb from three remote-sensing viewpoints, namely Earth, STEREO-A, and Solar Orbiter. In addition to representing the most-distant observed filament at extreme ultraviolet wavelengths -- captured by Solar Orbiter's field of view extending to above 6 $R_{\odot}$ -- this event was also associated with the release of a fast ($\sim$2200 km$\cdot$s$^{-1}$) coronal mass ejection (CME) that was directed towards BepiColombo and Parker Solar Probe. These two probes were separated by 2$^{\circ}$ in latitude, 4$^{\circ}$ in longitude, and 0.03 au in radial distance around the time of the CME-driven shock arrival in situ. The relative proximity of the two probes to each other and to the Sun ($\sim$0.35 au) allows us to study the mesoscale structure of CMEs at Mercury's orbit for the first time. We analyse similarities and differences in the main CME-related structures measured at the two locations, namely the interplanetary shock, the sheath region, and the magnetic ejecta. We find that, despite the separation between the two spacecraft being well within the typical uncertainties associated with determination of CME geometric parameters from remote-sensing observations, the two sets of in-situ measurements display some profound differences that make understanding of the overall 3D CME structure particularly challenging. Finally, we discuss our findings within the context of space weather at Mercury's distances and in terms of the need to investigate solar transients via spacecraft constellations with small separations, which has been gaining significant attention during recent years.
△ Less
Submitted 3 January, 2024;
originally announced January 2024.
-
Compositional metrics of fast and slow Alfvenic solar wind emerging from coronal holes and their boundaries
Authors:
Tamar Ervin,
Stuart D. Bale,
Samuel T. Badman,
Yeimy J. Rivera,
Orlando Romeo,
Jia Huang,
Pete Riley,
Trevor A. Bowen,
Susan T. Lepri,
Ryan M. Dewey
Abstract:
We seek to understand the composition and variability of fast (FSW) and slow Alfvenic solar wind (SASW) emerging from coronal holes (CH). We leverage an opportune conjunction between Solar Orbiter and Parker Solar Probe (PSP) during PSP Encounter 11 to include compositional diagnostics from the Solar Orbiter heavy ion sensor (HIS) as these variations provide crucial insights into the origin and na…
▽ More
We seek to understand the composition and variability of fast (FSW) and slow Alfvenic solar wind (SASW) emerging from coronal holes (CH). We leverage an opportune conjunction between Solar Orbiter and Parker Solar Probe (PSP) during PSP Encounter 11 to include compositional diagnostics from the Solar Orbiter heavy ion sensor (HIS) as these variations provide crucial insights into the origin and nature of the solar wind. We use Potential Field Source Surface (PFSS) and Magnetohydrodynamic (MHD) models to connect the observed plasma at PSP and Solar Orbiter to its origin footpoint in the photosphere, and compare these results with the in situ measurements. A very clear signature of a heliospheric current sheet (HCS) crossing as evidenced by enhancements in low FIP elements, ion charge state ratios, proton density, low-Alfvenicity, and polarity estimates validates the combination of modeling, data, and map**. We identify two FSW streams emerging from small equatorial coronal holes (CH) with low ion charge state ratios, low FIP bias, high-Alfvenicity, and low footpoint brightness, yet anomalously low alpha particle abundance for both streams. We identify high-Alfvenicity slow solar wind emerging from the over-expanded boundary of a CH having intermediate alpha abundance, high-Alfvenicity, and dips in ion charge state ratios corresponding to CH boundaries. Through this comprehensive analysis, we highlight the power of multi-instrument conjunction studies in assessing the sources of the solar wind.
△ Less
Submitted 29 April, 2024; v1 submitted 14 September, 2023;
originally announced September 2023.
-
The Temperature, Electron, and Pressure Characteristics of Switchbacks: Parker Solar Probe Observations
Authors:
Jia Huang,
Justin C. Kasper,
Davin E. Larson,
Michael D. McManus,
Phyllis Whittlesey,
Roberto Livi,
Ali Rahmati,
Orlando M. Romeo,
Mingzhe Liu,
Lan K. Jian,
J. L. Verniero,
Marco Velli,
Samuel T. Badman,
Yeimy J. Rivera,
Tatiana Niembro,
Kristoff Paulson,
Michael L. Stevens,
Anthony W. Case,
Trevor A. Bowen,
Marc Pulupa,
Stuart D. Bale,
Jasper S. Halekas
Abstract:
Parker Solar Probe (PSP) observes unexpectedly prevalent switchbacks, which are rapid magnetic field reversals that last from seconds to hours, in the inner heliosphere, posing new challenges to understanding their nature, origin, and evolution. In this work, we investigate the thermal states, electron pitch angle distributions, and pressure signatures of both inside and outside switchbacks, separ…
▽ More
Parker Solar Probe (PSP) observes unexpectedly prevalent switchbacks, which are rapid magnetic field reversals that last from seconds to hours, in the inner heliosphere, posing new challenges to understanding their nature, origin, and evolution. In this work, we investigate the thermal states, electron pitch angle distributions, and pressure signatures of both inside and outside switchbacks, separating a switchback into spike, transition region (TR), and quiet period (QP). Based on our analysis, we find that the proton temperature anisotropies in TRs seem to show an intermediate state between spike and QP plasmas. The proton temperatures are more enhanced in spike than in TR and QP, but the alpha temperatures and alpha-to-proton temperature ratios show the opposite trends, implying that the preferential heating mechanisms of protons and alphas are competing in different regions of switchbacks. Moreover, our results suggest that the electron integrated intensities are almost the same across the switchbacks but the electron pitch angle distributions are more isotropic inside than outside switchbacks, implying switchbacks are intact structures but strong scattering of electrons happens inside switchbacks. In addition, the examination of pressures reveals that the total pressures are comparable through an individual switchback, confirming switchbacks are pressure-balanced structures. These characteristics could further our understanding of ion heating, electron scattering, and the structure of switchbacks.
△ Less
Submitted 29 August, 2023; v1 submitted 7 June, 2023;
originally announced June 2023.
-
Dropouts of Fully Stripped Ions in the Solar Wind: A Diagnostic for Wave Heating versus Reconnection
Authors:
John C. Raymond,
M. Asgari-Targhi,
Maurice L. Wilson,
Yeimy J. Rivera,
Susan T Lepri,
Chengcai Shen
Abstract:
The SWICS instrument aboard the ACE satellite has detected frequent intervals in the slow solar wind and interplanetary coronal mass ejections (ICMEs) in which C6+ and other fully stripped ions are strongly depleted, though the ionization states of elements such as Si and Fe indicate that those ions should be present. It has been suggested that these outlier or dropout events can be explained by t…
▽ More
The SWICS instrument aboard the ACE satellite has detected frequent intervals in the slow solar wind and interplanetary coronal mass ejections (ICMEs) in which C6+ and other fully stripped ions are strongly depleted, though the ionization states of elements such as Si and Fe indicate that those ions should be present. It has been suggested that these outlier or dropout events can be explained by the resonant cyclotron heating process, because these ions all have the same cyclotron frequency as He2+. We investigate the region in the corona where these outlier events form. It must be above the ionization freeze-in height and the transition to collisionless plasma conditions, but low enough that the wind still feels the effects of solar gravity. We suggest that the dropout events correspond to relatively dense blobs of gas in which the heating is reduced because local variations in the Alfven speed change the reflection of Alfven waves and the turbulent cascade. As a result, the wave power at the cyclotron frequency of the fully stripped ions is absorbed by He2+ and may not be able to heat the other fully-stripped ions enough to overcome solar gravity. If this picture is borne out, it may help to discriminate between resonant cyclotron heating and stochastic heating models of the solar wind.
△ Less
Submitted 25 August, 2022;
originally announced August 2022.
-
Defining the Middle Corona
Authors:
Matthew J. West,
Daniel B. Seaton,
David B. Wexler,
John C. Raymond,
Giulio Del Zanna,
Yeimy J. Rivera,
Adam R. Kobelski,
Craig DeForest,
Leon Golub,
Amir Caspi,
Chris R. Gilly,
Jason E. Kooi,
Benjamin L. Alterman,
Nathalia Alzate,
Dipankar Banerjee,
David Berghmans,
Bin Chen,
Lakshmi Pradeep Chitta,
Cooper Downs,
Silvio Giordano,
Aleida Higginson,
Russel A. Howard,
Emily Mason,
James P. Mason,
Karen A. Meyer
, et al. (9 additional authors not shown)
Abstract:
The middle corona, the region roughly spanning heliocentric altitudes from $1.5$ to $6\,R_\odot$, encompasses almost all of the influential physical transitions and processes that govern the behavior of coronal outflow into the heliosphere. Eruptions that could disrupt the near-Earth environment propagate through it. Importantly, it modulates inflow from above that can drive dynamic changes at low…
▽ More
The middle corona, the region roughly spanning heliocentric altitudes from $1.5$ to $6\,R_\odot$, encompasses almost all of the influential physical transitions and processes that govern the behavior of coronal outflow into the heliosphere. Eruptions that could disrupt the near-Earth environment propagate through it. Importantly, it modulates inflow from above that can drive dynamic changes at lower heights in the inner corona. Consequently, this region is essential for comprehensively connecting the corona to the heliosphere and for develo** corresponding global models. Nonetheless, because it is challenging to observe, the middle corona has been poorly studied by major solar remote sensing missions and instruments, extending back to the Solar and Heliospheric Observatory (SoHO) era. Thanks to recent advances in instrumentation, observational processing techniques, and a realization of the importance of the region, interest in the middle corona has increased. Although the region cannot be intrinsically separated from other regions of the solar atmosphere, there has emerged a need to define the region in terms of its location and extension in the solar atmosphere, its composition, the physical transitions it covers, and the underlying physics believed to be encapsulated by the region. This paper aims to define the middle corona and give an overview of the processes that occur there.
△ Less
Submitted 9 March, 2023; v1 submitted 8 August, 2022;
originally announced August 2022.
-
Low-Drift-Rate External Cavity Diode Laser
Authors:
Eddie H. Chang,
Jared Rivera,
Brian Bostwick,
Christian Schneider,
Peter Yu,
Eric R. Hudson
Abstract:
We present the design, construction, and simulation of a simple, low-cost external cavity diode laser with a measured free-running frequency drift rate of 1.4(1)~MHz/h at 852 nm. This performance is achieved via a compact, nearly monolithic aluminum structure to minimize temperature gradients across the laser cavity. We present thermal finite element method simulations which quantify the effects o…
▽ More
We present the design, construction, and simulation of a simple, low-cost external cavity diode laser with a measured free-running frequency drift rate of 1.4(1)~MHz/h at 852 nm. This performance is achieved via a compact, nearly monolithic aluminum structure to minimize temperature gradients across the laser cavity. We present thermal finite element method simulations which quantify the effects of temperature gradients, and suggest that the drift rate is likely limited by laser-diode aging.
△ Less
Submitted 25 May, 2022;
originally announced May 2022.
-
Linking the Sun to the Heliosphere Using Composition Data and Modelling. A Test Case with a Coronal Jet
Authors:
Susanna Parenti,
Iulia Chifu,
Giulio Del Zanna,
Justin Edmondson,
Alessandra Giunta,
Viggo H. Hansteen,
Aleida Higginson,
J. Martin Laming,
Susan T. Lepri,
Benjamin J. Lynch,
Yeimy J. Rivera,
Rudolf von Steiger,
Thomas Wiegelmann,
Robert F. Wimmer-Schweingruber,
Natalia Zambrana Prado,
Gabriel Pelouze
Abstract:
Our understanding of the formation and evolution of the corona and the heliosphere is linked to our capability of properly interpreting the data from remote sensing and in-situ observations. In this respect, being able to correctly connect in-situ observations with their source regions on the Sun is the key for solving this problem. In this work we aim at testing a diagnostics method for this conn…
▽ More
Our understanding of the formation and evolution of the corona and the heliosphere is linked to our capability of properly interpreting the data from remote sensing and in-situ observations. In this respect, being able to correctly connect in-situ observations with their source regions on the Sun is the key for solving this problem. In this work we aim at testing a diagnostics method for this connectivity. This paper makes use of a coronal jet observed on 2010 August 2nd in active region 11092 as a test for our connectivity method. This combines solar EUV and in-situ data together with magnetic field extrapolation, large scale MHD modeling and FIP (First Ionization Potential) bias modeling to provide a global picture from the source region of the jet to its possible signatures at 1AU. Our data analysis reveals the presence of outflow areas near the jet which are within open magnetic flux regions and which present FIP bias consistent with the FIP model results. In our picture, one of these open areas is the candidate jet source. Using a back-map** technique we identified the arrival time of this solar plasma at the ACE spacecraft. The in-situ data show signatures of changes in the plasma and magnetic field parameters, with FIP bias consistent with the possible passage of the jet material. Our results highlight the importance of remote sensing and in-situ coordinated observations as a key to solve the connectivity problem. We discuss our results in view of the recent Solar Orbiter launch which is currently providing such unique data.
△ Less
Submitted 12 October, 2021;
originally announced October 2021.
-
On the production of He$^+$ of solar origin in the solar wind
Authors:
Yeimy J. Rivera,
Enrico Landi,
Susan T. Lepri,
Jason A. Gilbert
Abstract:
Solar wind measurements in the heliosphere are predominantly comprised of protons, alphas, and minor elements in a highly ionized state. The majority of low charge states, such as He$^{+}$, measured in situ are often attributed to pick up ions of non-solar origin. However, through inspection of the velocity distribution functions of near Earth measurements, we find a small but significant populati…
▽ More
Solar wind measurements in the heliosphere are predominantly comprised of protons, alphas, and minor elements in a highly ionized state. The majority of low charge states, such as He$^{+}$, measured in situ are often attributed to pick up ions of non-solar origin. However, through inspection of the velocity distribution functions of near Earth measurements, we find a small but significant population of He$^+$ ions in the normal solar wind whose properties indicate that it originated from the Sun and has evolved as part of the normal solar wind. Current ionization models, largely governed by electron impact and radiative ionization and recombination processes, underestimate this population by several orders of magnitude. Therefore, to reconcile the singly ionized He observed, we investigate recombination of solar He$^{2+}$ through charge exchange with neutrals from circumsolar dust as a possible formation mechanism of solar He$^{+}$. We present an empirical profile of neutrals necessary for charge exchange to become an effective vehicle to recombine He$^{2+}$ to He$^{+}$ such that it meets observational He$^{+}$ values. We find the formation of He$^{+}$ is not only sensitive to the density of neutrals but also to the inner boundary of the neutral distribution encountered along the solar wind path. However, further observational constraints are necessary to confirm that the interaction between solar $α$ particles and dust neutrals is the primary source of the He$^{+}$ observations.
△ Less
Submitted 9 July, 2020; v1 submitted 8 July, 2020;
originally announced July 2020.
-
Error Control and Loss Functions for the Deep Learning Inversion of Borehole Resistivity Measurements
Authors:
M. Shahriari,
D. Pardo,
J. A. Rivera,
C. Torres-Verdín,
A. Picon,
J. Del Ser,
S. Ossandón,
V. M. Calo
Abstract:
Deep learning (DL) is a numerical method that approximates functions. Recently, its use has become attractive for the simulation and inversion of multiple problems in computational mechanics, including the inversion of borehole logging measurements for oil and gas applications. In this context, DL methods exhibit two key attractive features: a) once trained, they enable to solve an inverse problem…
▽ More
Deep learning (DL) is a numerical method that approximates functions. Recently, its use has become attractive for the simulation and inversion of multiple problems in computational mechanics, including the inversion of borehole logging measurements for oil and gas applications. In this context, DL methods exhibit two key attractive features: a) once trained, they enable to solve an inverse problem in a fraction of a second, which is convenient for borehole geosteering operations as well as in other real-time inversion applications. b) DL methods exhibit a superior capability for approximating highly-complex functions across different areas of knowledge. Nevertheless, as it occurs with most numerical methods, DL also relies on expert design decisions that are problem specific to achieve reliable and robust results. Herein, we investigate two key aspects of deep neural networks (DNNs) when applied to the inversion of borehole resistivity measurements: error control and adequate selection of the loss function. As we illustrate via theoretical considerations and extensive numerical experiments, these interrelated aspects are critical to recover accurate inversion results.
△ Less
Submitted 28 May, 2020; v1 submitted 7 May, 2020;
originally announced May 2020.
-
Optimal Design of Multi-Layer Fog Collectors
Authors:
Musaddaq Azeem,
Adrien Guèrin,
Thomas Dumais,
Luis Caminos,
Raymond E. Goldstein,
Adriana I. Pesci,
Juan de Dios Rivera,
María Josefina Torres,
Jakub Wiener,
José Luis Campos,
Jacques Dumais
Abstract:
The growing concerns over desertification have spurred research into technologies aimed at acquiring water from non-traditional sources such as dew, fog, and water vapor. Some of the most promising developments have focused on improving designs to collect water from fog. However, the absence of a shared framework to predict, measure and compare the water collection efficiencies of new prototypes i…
▽ More
The growing concerns over desertification have spurred research into technologies aimed at acquiring water from non-traditional sources such as dew, fog, and water vapor. Some of the most promising developments have focused on improving designs to collect water from fog. However, the absence of a shared framework to predict, measure and compare the water collection efficiencies of new prototypes is becoming a major obstacle to progress in the field. We address this problem by providing a general theory to design efficient fog collectors as well as a concrete experimental protocol to furnish our theory with all the necessary parameters to quantify the effective water collection efficiency. We show in particular that multi-layer collectors are required for high fog collection efficiency and that all efficient designs are found within a narrow range of mesh porosity. We support our conclusions with measurements on simple multi-layer harp collectors.
△ Less
Submitted 28 January, 2020; v1 submitted 27 January, 2020;
originally announced January 2020.
-
Reducing Uncertainty in Simulation Estimates of the Surface Tension Through a Two-Scale Finite-Size Analysis: Thicker is Better
Authors:
Jose L. Rivera,
Jack Douglas
Abstract:
Recent simulation studies of the surface tension, and other properties of thin free-standing films, have revealed unexpected finite size effects in which the variance of the properties vary monotonically with the in-plane width of the films, complicating the extrapolation of estimates of film properties to the thermodynamic limit. We carried out molecular dynamics simulations to determine the orig…
▽ More
Recent simulation studies of the surface tension, and other properties of thin free-standing films, have revealed unexpected finite size effects in which the variance of the properties vary monotonically with the in-plane width of the films, complicating the extrapolation of estimates of film properties to the thermodynamic limit. We carried out molecular dynamics simulations to determine the origin of this phenomenon, and to address the practical problem of develo** a more reliable methodology for estimating the surface tension in the thermodynamic limit. We find that there are two distinct finite size effects that must be addressed in a finite size analysis of the surface tension in thin films. The first finite size scale is the in-plane width of the films and the second scale is the simulation cell size in the transverse direction. Increasing the first scale enhances fluctuations in the surface tension, measured by the standard deviation of their distribution, while increasing the second reduces the surface tension fluctuations due to a corresponding increased "freedom" of the film to fluctuate out of plane. We find that by using progressively large simulation cells in the transverse direction, while kee** the film width fixed to an extent in which the full bulk liquid zone is developed, allows us to obtain a smooth extrapolation to the thermodynamic limit, enabling a reduction of the surface tension uncertainty to a magnitude on the order of 1% for systems having a reasonable large size, i.e., O(1 micrometer).
△ Less
Submitted 27 August, 2019;
originally announced August 2019.
-
Vapor-like liquid coexistence densities affect the extension of the critical point's influence zone
Authors:
Jose Luis Rivera,
Homero Nicanor-Guzman,
Roberto Guerra-Gonzalez
Abstract:
The critical point affects the coexistence behavior of the vapor-liquid equilibrium densities. The length of the critical influence zone is under debate because for some properties, like shear viscosity, the extension is only a few degrees, while for others, such as the density order parameter, the critical influence zone range covers up to hundreds of degrees below the critical temperature. Here…
▽ More
The critical point affects the coexistence behavior of the vapor-liquid equilibrium densities. The length of the critical influence zone is under debate because for some properties, like shear viscosity, the extension is only a few degrees, while for others, such as the density order parameter, the critical influence zone range covers up to hundreds of degrees below the critical temperature. Here we show that for a simple molecular potential of ethane, the critical influence zone covers a wide zone of tens of degrees (below the critical temperature) down to a transition temperature, at which the apparent critical influence zone vanishes and the transition temperature can be predicted through a pressure analysis of the coexisting bulk liquid phase. The liquid phases within the apparent critical influence zone show low densities, making them behave internally like their corresponding vapor phases. Therefore, the experimentally observed wide extension of the critical influence zone is due to a vapor-like effect due to low bulk liquid phase densities.
△ Less
Submitted 16 April, 2015;
originally announced April 2015.
-
Modeling the Heating of Biological Tissue based on the Hyperbolic Heat Transfer Equation
Authors:
M. M. Tung,
M. Trujillo,
J. A. Lopez Molina,
M. J. Rivera,
E. J. Berjano
Abstract:
In modern surgery, a multitude of minimally intrusive operational techniques are used which are based on the punctual heating of target zones of human tissue via laser or radio-frequency currents. Traditionally, these processes are modeled by the bioheat equation introduced by Pennes, who considers Fourier's theory of heat conduction. We present an alternative and more realistic model establishe…
▽ More
In modern surgery, a multitude of minimally intrusive operational techniques are used which are based on the punctual heating of target zones of human tissue via laser or radio-frequency currents. Traditionally, these processes are modeled by the bioheat equation introduced by Pennes, who considers Fourier's theory of heat conduction. We present an alternative and more realistic model established by the hyperbolic equation of heat transfer. To demonstrate some features and advantages of our proposed method, we apply the obtained results to different types of tissue heating with high energy fluxes, in particular radiofrequency heating and pulsed laser treatment of the cornea to correct refractive errors. Hopefully, the results of our approach help to refine surgical interventions in this novel field of medical treatment.
△ Less
Submitted 20 November, 2008;
originally announced November 2008.
-
Relativistic analysis of magnetoelectric crystals: extracting a new 4-dimensional P odd and T odd pseudoscalar from Cr_2 O_3 data
Authors:
Friedrich W. Hehl,
Yuri N. Obukhov,
Jean-Pierre Rivera,
Hans Schmid
Abstract:
Earlier, the linear magnetoelectric effect of chromium sesquioxide Cr_2 O_3 has been determined experimentally as a function of temperature. One measures the electric field-induced magnetization on Cr_2 O_3 crystals or the magnetic field-induced polarization. From the magnetoelectric moduli of Cr_2 O_3 we extract a 4-dimensional relativistic invariant pseudoscalar \tildeα. It is temperature depe…
▽ More
Earlier, the linear magnetoelectric effect of chromium sesquioxide Cr_2 O_3 has been determined experimentally as a function of temperature. One measures the electric field-induced magnetization on Cr_2 O_3 crystals or the magnetic field-induced polarization. From the magnetoelectric moduli of Cr_2 O_3 we extract a 4-dimensional relativistic invariant pseudoscalar \tildeα. It is temperature dependent and of the order of ~ 10^{-4} Y_0, with Y_0 as vacuum admittance. We show that the new pseudoscalar \tildeαis odd under parity transformation and odd under time inversion. Moreover, \tildeαis for Cr_2 O_3 what Tellegen's gyrator is for two port theory, the axion field for axion electrodynamics, and the PEMC (perfect electromagnetic conductor) for electrical engineering.
△ Less
Submitted 15 August, 2007;
originally announced August 2007.