-
Longitudinal spin-relaxation optimization for miniaturized optically pumped magnetometers
Authors:
A. P. McWilliam,
S. Dyer,
D. Hunter,
M. Mrozowski,
S. J. Ingleby,
O. Sharp,
D. P. Burt,
P. F. Griffin,
J. P. McGilligan,
E. Riis
Abstract:
The microfabrication of cesium vapor cells for optically pumped magnetometry relies on optimization of buffer gas pressure in order to maximize atomic coherence time and sensitivity to external magnetic signals. We demonstrate post-bond nitrogen buffer gas pressure tuning through localized heating of an integrated micro-pill dispenser. We characterize the variation in the intrinsic longitudinal re…
▽ More
The microfabrication of cesium vapor cells for optically pumped magnetometry relies on optimization of buffer gas pressure in order to maximize atomic coherence time and sensitivity to external magnetic signals. We demonstrate post-bond nitrogen buffer gas pressure tuning through localized heating of an integrated micro-pill dispenser. We characterize the variation in the intrinsic longitudinal relaxation rate, $γ_{10}$, and magnetic sensitivity, as a function of the resulting nitrogen buffer gas pressure. Measurements are conducted through employing an optically pumped magnetometer operating in a free-induction-decay configuration. $γ_{10}$ is extracted across a range of nitrogen pressures between $\sim$~60~-~700~Torr, measuring a minimum of 140~Hz at 115~Torr. Additionally, we achieve sensitivities as low as 130 ~fT/$\sqrt{\text{Hz}}$ at a bias field amplitude of $\sim 50~μ$T. With the optimal nitrogen buffer gas pressure now quantified and achievable post-fabrication, these mass-producible cells can be tailored to suit a variety of sensing applications, ensuring peak magnetometer performance.
△ Less
Submitted 3 July, 2024; v1 submitted 27 June, 2024;
originally announced June 2024.
-
A high-flux cold-atom source utilising a grating atom chip
Authors:
Hendrik Heine,
Melanie S Le Gonidec,
Aidan S Arnold,
Paul F Griffin,
Erling Riis,
Waldemar Herr,
Ernst M Rasel
Abstract:
Bose-Einstein condensates (BECs) have been proposed for many applications in atom interferometry, as their coherence over long evolution times promises unprecedented sensitivity. To date, BECs can be efficiently created in devices using atom chips, but these are still complex and place high demands on size, weight and power. To further simplify these setups, we equipped an atom chip with a nano-st…
▽ More
Bose-Einstein condensates (BECs) have been proposed for many applications in atom interferometry, as their coherence over long evolution times promises unprecedented sensitivity. To date, BECs can be efficiently created in devices using atom chips, but these are still complex and place high demands on size, weight and power. To further simplify these setups, we equipped an atom chip with a nano-structured diffraction-grating to derive all beams for the magneto-optical trap (MOT) from a single laser beam. Moreover, using a 2D$^+$-MOT as an atomic source and a beam with uniform intensity for the grating illumination, we capture $1\times10^9$ atoms in one second, cool them to $14\,μ$K, and demonstrate magnetic trap** using the atom chip. This is a major step towards the simplification of portable BEC devices for quantum sensing on earth and in space.
△ Less
Submitted 14 June, 2024;
originally announced June 2024.
-
Single-beam grating-chip 3D and 1D optical lattices
Authors:
Alan Bregazzi,
James P. McGilligan,
Paul F. Griffin,
Erling Riis,
Aidan S. Arnold
Abstract:
Ultracold atoms are crucial for unlocking truly precise and accurate quantum metrology, and provide an essential platform for quantum computing, communication and memories. One of the largest ongoing challenges is the miniaturization of these quantum devices. Here, we show that the typically macroscopic optical lattice architecture at the heart of many ultra-precise quantum technologies can be rea…
▽ More
Ultracold atoms are crucial for unlocking truly precise and accurate quantum metrology, and provide an essential platform for quantum computing, communication and memories. One of the largest ongoing challenges is the miniaturization of these quantum devices. Here, we show that the typically macroscopic optical lattice architecture at the heart of many ultra-precise quantum technologies can be realized with a single input laser beam on the same diffractive chip already used to create the ultracold atoms. Moreover, this inherently ultra-stable platform enables access to a plethora of new lattice dimensionalities and geometries, ideally suited for the design of high-accuracy, portable quantum devices.
△ Less
Submitted 31 May, 2024;
originally announced May 2024.
-
Optical pum** enhancement of a free-induction-decay magnetometer
Authors:
Dominic Hunter,
Marcin S. Mrozowski,
Allan McWilliam,
Stuart J. Ingleby,
Terry E. Dyer,
Paul F. Griffin,
Erling Riis
Abstract:
Spin preparation prior to a free-induction-decay (FID) measurement can be adversely affected by transverse bias fields, particularly in the geophysical field range. A strategy that enhances the spin polarization accumulated before readout is demonstrated, by synchronizing optical pum** with a magnetic field pulse that supersedes any transverse fields by over two order of magnitude. The pulsed ma…
▽ More
Spin preparation prior to a free-induction-decay (FID) measurement can be adversely affected by transverse bias fields, particularly in the geophysical field range. A strategy that enhances the spin polarization accumulated before readout is demonstrated, by synchronizing optical pum** with a magnetic field pulse that supersedes any transverse fields by over two order of magnitude. The pulsed magnetic field is generated along the optical pum** axis using a compact electromagnetic coil pair encompassing a micro-electromechanical systems (MEMS) vapor cell. The coils also resistively heat the cesium (Cs) vapor to the optimal atomic density without spurious magnetic field contributions as they are rapidly demagnetized to approximately zero field during spin readout. The demagnetization process is analyzed electronically, and directly with a FID measurement, to confirm that the residual magnetic field is minimal during detection. The sensitivity performance of this technique is compared to existing optical pum** modalities across a wide magnetic field range. A noise floor sensitivity of $238\,\mathrm{fT/\surd{Hz}}$ was achieved in a field of approximately $\mathrm{50\,μ{T}}$, in close agreement with the Cramér-Rao lower bound (CRLB) predicted noise density of $258\,\mathrm{fT/\surd{Hz}}$.
△ Less
Submitted 29 September, 2023; v1 submitted 21 July, 2023;
originally announced July 2023.
-
Practical Doppler broadening thermometry
Authors:
Nicola Agnew,
Graham Machin,
Erling Riis,
Aidan S. Arnold
Abstract:
We report initial research to develop a compact and practical primary thermometer based on Doppler broadening thermometry (DBT). The DBT sensor uses an intrinsic property of thermalized atoms, namely, the Doppler width of a spectral line characteristic of the atoms being probed. The DBT sensor, being founded on a primary thermometry approach, requires no calibration or reference, and so in princip…
▽ More
We report initial research to develop a compact and practical primary thermometer based on Doppler broadening thermometry (DBT). The DBT sensor uses an intrinsic property of thermalized atoms, namely, the Doppler width of a spectral line characteristic of the atoms being probed. The DBT sensor, being founded on a primary thermometry approach, requires no calibration or reference, and so in principle could achieve reliable long-term in-situ thermodynamic temperature measurement. Here we describe our approach and report on initial proof-of-concept investigations with alkali metal vapour cells. Our focus is to develop long-term stable thermometers based on DBT that can be used to reliably measure temperatures for long periods and in environments where sensor retrieval for re-calibration is impractical such as in nuclear waste storage facilities.
△ Less
Submitted 18 October, 2023; v1 submitted 12 July, 2023;
originally announced July 2023.
-
Optimal binary gratings for multi-wavelength magneto-optical traps
Authors:
Oliver S. Burrow,
Robert J. Fasano,
Wesley Brand,
Michael W. Wright,
Wenbo Li,
Andrew D. Ludlow,
Erling Riis,
Paul F. Griffin,
Aidan S. Arnold
Abstract:
Grating magneto-optical traps are an enabling quantum technology for portable metrological devices with ultracold atoms. However, beam diffraction efficiency and angle are affected by wavelength, creating a single-optic design challenge for laser cooling in two stages at two distinct wavelengths - as commonly used for loading e.g. Sr or Yb atoms into optical lattice or tweezer clocks. Here, we opt…
▽ More
Grating magneto-optical traps are an enabling quantum technology for portable metrological devices with ultracold atoms. However, beam diffraction efficiency and angle are affected by wavelength, creating a single-optic design challenge for laser cooling in two stages at two distinct wavelengths - as commonly used for loading e.g. Sr or Yb atoms into optical lattice or tweezer clocks. Here, we optically characterize a wide variety of binary gratings at different wavelengths to find a simple empirical fit to experimental grating diffraction efficiency data in terms of dimensionless etch depth and period for various duty cycles. The model avoids complex 3D light-grating surface calculations, yet still yields results accurate to a few percent across a broad range of parameters. Gratings optimized for two (or more) wavelengths can now be designed in an informed manner suitable for a wide class of atomic species enabling advanced quantum technologies.
△ Less
Submitted 18 November, 2023; v1 submitted 29 June, 2023;
originally announced June 2023.
-
A cold-atom Ramsey clock with a low volume physics package
Authors:
Alan Bregazzi,
Etienne Batori,
Ben Lewis,
Christoph Affolderbach,
Gaetano Mileti,
Erling Riis,
Paul Griffin
Abstract:
We demonstrate a Ramsey-type microwave clock interrogating the 6.835~GHz ground-state transition in cold \textsuperscript{87}Rb atoms loaded from a grating magneto-optical trap (GMOT) enclosed in an additively manufactured loop-gap resonator microwave cavity. A short-term stability of $1.5 \times10^{-11} $~$τ^{-1/2}$ is demonstrated, in reasonable agreement with predictions from the signal-to-nois…
▽ More
We demonstrate a Ramsey-type microwave clock interrogating the 6.835~GHz ground-state transition in cold \textsuperscript{87}Rb atoms loaded from a grating magneto-optical trap (GMOT) enclosed in an additively manufactured loop-gap resonator microwave cavity. A short-term stability of $1.5 \times10^{-11} $~$τ^{-1/2}$ is demonstrated, in reasonable agreement with predictions from the signal-to-noise ratio of the measured Ramsey fringes. The cavity-grating package has a volume of $\approx$67~cm\textsuperscript{3}, ensuring an inherently compact system while the use of a GMOT drastically simplifies the optical requirements for laser cooled atoms. This work is another step towards the realisation of highly compact portable cold-atom frequency standards.
△ Less
Submitted 4 May, 2023;
originally announced May 2023.
-
An additive-manufactured microwave cavity for a compact cold-atom clock
Authors:
Etienne Batori,
Alan Bregazzi,
Ben Lewis,
Paul Griffin,
Erling Riis,
Gaetano Mileti,
Christoph Affolderbach
Abstract:
We present an additive-manufactured microwave cavity for a Ramsey-type, double resonance, compact cold-atom clock. Atoms can be laser cooled inside the cavity using a grating magneto-optic trap (GMOT) with the cavity providing an excellent TE011-like mode while maintaining sufficient optical access for atomic detection. The cavity features a low Q-factor of 360 which conveniently reduces the cavit…
▽ More
We present an additive-manufactured microwave cavity for a Ramsey-type, double resonance, compact cold-atom clock. Atoms can be laser cooled inside the cavity using a grating magneto-optic trap (GMOT) with the cavity providing an excellent TE011-like mode while maintaining sufficient optical access for atomic detection. The cavity features a low Q-factor of 360 which conveniently reduces the cavity-pulling of the future clock. Despite the potential porosity of the additive-manufacturing process, we demonstrate that the cavity is well-suited for vacuum. A preliminary clock setup using cold atoms allows for measuring the Zeeman spectrum and Rabi oscillations in the cavity which enables us to infer excellent field uniformity and homogeneity respectively, across the volume accessed by the cold atoms. Ramsey spectroscopy is demonstrated, indicating the cavity is suitable for clock applications. Finally, we discuss the limitations of the future clock.
△ Less
Submitted 4 May, 2023;
originally announced May 2023.
-
Real-time buffer gas pressure tuning in a micro-machined vapor cell
Authors:
S. Dyer,
A. McWilliam,
D. Hunter,
S. Ingleby,
D. P. Burt,
O. Sharp,
F. Mirando,
P. F. Griffin,
E. Riis,
J. P. McGilligan
Abstract:
We demonstrate a controllable depletion of the nitrogen buffer gas pressure in a micro-machined cesium (Cs) vapor cell from the dynamic heating of an alkali dispenser pill. When the alkali source is laser activated, the gettering compounds within the alkali pill dispenser reduce the nitrogen (N$_2$) content from the vapor for fine-tuning of the alkali to buffer gas pressure ratio. Additionally, we…
▽ More
We demonstrate a controllable depletion of the nitrogen buffer gas pressure in a micro-machined cesium (Cs) vapor cell from the dynamic heating of an alkali dispenser pill. When the alkali source is laser activated, the gettering compounds within the alkali pill dispenser reduce the nitrogen (N$_2$) content from the vapor for fine-tuning of the alkali to buffer gas pressure ratio. Additionally, we decrease the buffer gas pressure below 100$\,$mTorr to evaluate the presence of other potential broadening mechanisms. Real-time control of the gas pressure ratio in the vapor cell will have notable benefits for refining atomic sensor performance and provide a routine to achieve various target pressures across a wafer bonded with a uniform back-filled buffer gas pressure.
△ Less
Submitted 12 April, 2023;
originally announced April 2023.
-
Free-induction-decay magnetic field imaging with a microfabricated Cs vapor cell
Authors:
D. Hunter,
C. Perrella,
A. McWilliam,
J. P. McGilligan,
M. Mrozowski,
S. J. Ingleby,
P. F. Griffin,
D. Burt,
A. N. Luiten,
E. Riis
Abstract:
Magnetic field imaging is a valuable resource for signal source localization and characterization. This work reports an optically pumped magnetometer (OPM) based on the free-induction-decay (FID) protocol, that implements microfabricated cesium (Cs) vapor cell technology to visualize the magnetic field distributions resulting from various magnetic sources placed close to the cell. The slow diffusi…
▽ More
Magnetic field imaging is a valuable resource for signal source localization and characterization. This work reports an optically pumped magnetometer (OPM) based on the free-induction-decay (FID) protocol, that implements microfabricated cesium (Cs) vapor cell technology to visualize the magnetic field distributions resulting from various magnetic sources placed close to the cell. The slow diffusion of Cs atoms in the presence of a nitrogen (N$_{2}$) buffer gas enables spatially independent measurements to be made within the same vapor cell by translating a $175\,μ$m probe beam over the sensing area. For example, the OPM was used to record temporal and spatial information to reconstruct magnetic field distributions in one and two dimensions. The optimal magnetometer sensitivity was estimated to be 0.43$\,\mathrm{pT/\sqrt{Hz}}$ within a Nyquist limited bandwidth of $500\,$Hz. Furthermore, the sensor's dynamic range exceeds the Earth's field of approximately $50\,μ$T, which provides a framework for magnetic field imaging in unshielded environments.
△ Less
Submitted 29 September, 2023; v1 submitted 20 March, 2023;
originally announced March 2023.
-
A tuneable wavelength reference for chip-scale laser cooling
Authors:
S. Dyer,
K. Gallacher,
U. Hawley,
A. Bregazzi,
P. F. Griffin,
A. S. Arnold,
D. J. Paul,
E. Riis,
J. P. McGilligan
Abstract:
We demonstrate a tuneable, chip-scale wavelength reference to greatly reduce the complexity and volume of cold-atom sensors. A 1 mm optical path length micro-fabricated cell provides an atomic wavelength reference, with dynamic frequency control enabled by Zeeman shifting the atomic transition through the magnetic field generated by the printed circuit board (PCB) coils. The dynamic range of the l…
▽ More
We demonstrate a tuneable, chip-scale wavelength reference to greatly reduce the complexity and volume of cold-atom sensors. A 1 mm optical path length micro-fabricated cell provides an atomic wavelength reference, with dynamic frequency control enabled by Zeeman shifting the atomic transition through the magnetic field generated by the printed circuit board (PCB) coils. The dynamic range of the laser frequency stabilization system is evaluated and used in conjunction with an improved generation of chip-scale cold atom platforms that traps 4 million 87Rb atoms. The scalability and component consolidation provide a key step forward in the miniaturization of cold atom sensors.
△ Less
Submitted 6 December, 2022;
originally announced December 2022.
-
Cold-atom sha** with MEMS scanning mirrors
Authors:
Alan Bregazzi,
Paul Janin,
Sean Dyer,
James. P. McGilligan,
Oliver Burrow,
Erling Riis,
Deepak Uttamchandani,
Ralf Bauer,
Paul. F. Griffin
Abstract:
We demonstrate the integration of micro-electro-mechanical-systems (MEMS) scanning mirrors as active elements for the local optical pum** of ultra-cold atoms in a magneto-optical trap. A pair of MEMS mirrors steer a focused resonant beam through a cloud of trapped atoms shelved in the \textit{F}=1 ground-state of \textsuperscript{87}Rb for spatially-selective fluorescence of the atom cloud. Two-…
▽ More
We demonstrate the integration of micro-electro-mechanical-systems (MEMS) scanning mirrors as active elements for the local optical pum** of ultra-cold atoms in a magneto-optical trap. A pair of MEMS mirrors steer a focused resonant beam through a cloud of trapped atoms shelved in the \textit{F}=1 ground-state of \textsuperscript{87}Rb for spatially-selective fluorescence of the atom cloud. Two-dimensional control is demonstrated by forming geometrical patterns along the imaging axis of the cold atom ensemble. Such control of the atomic ensemble with a microfabricated mirror pair could find applications in single atom selection, local optical pum** and arbitrary cloud sha**. This approach has significant potential for miniaturisation and in creating portable control systems for quantum optic experiments.
△ Less
Submitted 2 September, 2022;
originally announced September 2022.
-
Invited Review: Micro-fabricated components for cold atom sensors
Authors:
J. P. McGilligan,
K. Gallacher,
P. F. Griffin,
D. J. Paul,
A. S. Arnold,
E. Riis
Abstract:
Laser cooled atoms have proven transformative for precision metrology, playing a pivotal role in state-of-the-art clocks and interferometers, and having the potential to provide a step-change in our modern technological capabilities. To successfully explore their full potential, laser cooling platforms must be translated from the laboratory environment and into portable, compact quantum sensors fo…
▽ More
Laser cooled atoms have proven transformative for precision metrology, playing a pivotal role in state-of-the-art clocks and interferometers, and having the potential to provide a step-change in our modern technological capabilities. To successfully explore their full potential, laser cooling platforms must be translated from the laboratory environment and into portable, compact quantum sensors for deployment in practical applications. This transition requires the amalgamation of a wide range of components and expertise if an unambiguously chip-scale cold atom sensor is to be realized. We present recent developments in cold-atom sensor miniaturization, focusing on key components that enable laser cooling on the chip-scale. The design, fabrication and impact of the components on sensor scalability and performance will be discussed with an outlook to the next generation of chip-scale cold atom devices.
△ Less
Submitted 1 August, 2022;
originally announced August 2022.
-
A grating-chip atomic fountain
Authors:
Ben Lewis,
Rachel Elvin,
Aidan S. Arnold,
Erling Riis,
Paul F. Griffin
Abstract:
Cold atom fountain clocks provide exceptional long term stability as they increase interrogation time at the expense of a larger size. We present a compact cold atom fountain using a grating magneto-optical trap (GMOT) to laser cool and launch the atoms in a simplified optical setup. The fountain is evaluated using coherent population trap** and demonstrates improved single-shot stability from t…
▽ More
Cold atom fountain clocks provide exceptional long term stability as they increase interrogation time at the expense of a larger size. We present a compact cold atom fountain using a grating magneto-optical trap (GMOT) to laser cool and launch the atoms in a simplified optical setup. The fountain is evaluated using coherent population trap** and demonstrates improved single-shot stability from the launch. Ramsey times up to 100 ms were measured with a corresponding fringe linewidth of 5 Hz. This technique could improve both short- and long-term stability of cold atom clocks whilst remaining compact for portable applications.
△ Less
Submitted 26 July, 2022;
originally announced July 2022.
-
Micro-machined deep silicon atomic vapor cells
Authors:
S. Dyer,
P. F. Griffin,
A. S. Arnold,
F. Mirando,
D. P. Burt,
E. Riis,
J. P. McGilligan
Abstract:
Using a simple and cost-effective water jet process, silicon etch depth limitations are overcome to realize a $6\,$mm deep atomic vapor cell. While the minimum silicon feature size was limited to a $1.5\,$mm width in these first generation vapor cells, we successfully demonstrate a two-chamber geometry by including a $\sim$25~mm meandering channel between the alkali pill chamber and main interroga…
▽ More
Using a simple and cost-effective water jet process, silicon etch depth limitations are overcome to realize a $6\,$mm deep atomic vapor cell. While the minimum silicon feature size was limited to a $1.5\,$mm width in these first generation vapor cells, we successfully demonstrate a two-chamber geometry by including a $\sim$25~mm meandering channel between the alkali pill chamber and main interrogation chamber. We evaluate the impact of the channel conductance on the introduction of alkali vapor density during the pill activation process, and mitigate glass damage and pill contamination near the main chamber. Finally, we highlight the improved signal achievable in the $6\,$mm silicon cell compared to standard $2\,$mm path length silicon vapor cells.
△ Less
Submitted 26 July, 2022;
originally announced July 2022.
-
A Digital Alkali Spin Maser
Authors:
Stuart Ingleby,
Paul Griffin,
Terry Dyer,
Marcin Mrozowski,
Erling Riis
Abstract:
Self-oscillating atomic magnetometers, in which the precession of atomic spins in a magnetic field is driven by resonant modulation, offer high sensitivity and dynamic range. Phase-coherent feedback from the detected signal to the applied modulation creates a resonant spin maser system, highly responsive to changes in the background magnetic field. Here we show a system in which the phase conditio…
▽ More
Self-oscillating atomic magnetometers, in which the precession of atomic spins in a magnetic field is driven by resonant modulation, offer high sensitivity and dynamic range. Phase-coherent feedback from the detected signal to the applied modulation creates a resonant spin maser system, highly responsive to changes in the background magnetic field. Here we show a system in which the phase condition for resonant precession is met by digital signal processing integrated into the maser feedback loop. This system uses a modest chip-scale laser and mass-produced dual-pass caesium vapour cell and operates in a 50 microtesla field, making it a suitable technology for portable measurements of the geophysical magnetic field. We demonstrate a Cramer-Rao lower bound-limited resolution of 50 fT at 1 s sampling cadence, and a sensor bandwidth of 10 kHz. This device also represents an important class of atomic system in which low-latency digital processing forms an integral part of a coherently-driven quantum system.
△ Less
Submitted 22 July, 2022;
originally announced July 2022.
-
Ultra-low noise, bi-polar, programmable current sources
Authors:
M. S. Mrozowski,
I. C. Chalmers,
S. J. Ingleby,
P. F. Griffin,
E. Riis
Abstract:
We present the design process and implementation of fully open-source, ultra-low noise programmable current source systems in two configurations. Although originally designed as coil drivers for Optically Pumped Magnetometers (OPMs), the device specifications make them potentially useful in a range of applications. The devices feature a bi-directional current range of $\pm$~10~mA and $\pm$~250~mA…
▽ More
We present the design process and implementation of fully open-source, ultra-low noise programmable current source systems in two configurations. Although originally designed as coil drivers for Optically Pumped Magnetometers (OPMs), the device specifications make them potentially useful in a range of applications. The devices feature a bi-directional current range of $\pm$~10~mA and $\pm$~250~mA respectively on three independent channels with 16-bit resolution. Both devices feature narrow 1/f noise bandwidth of 1~Hz, enabling magnetic field manipulation for high-performance OPMs. They exhibit low noise of 146.3~pA/$\sqrt{\mathrm{Hz}}$ and 4114~pA/$\sqrt{\mathrm{Hz}}$ which translates to 14.57~ppb/$\sqrt{\mathrm{Hz}}$ and 16.46~ppb/$\sqrt{\mathrm{Hz}}$ noise relative to full scale.
△ Less
Submitted 22 July, 2022; v1 submitted 21 July, 2022;
originally announced July 2022.
-
A simple imaging solution for chip-scale laser cooling
Authors:
A. Bregazzi,
P. F. Griffin,
A. S. Arnold,
D. P. Burt,
G. Martinez,
R. Boudot,
J. Kitching,
E. Riis,
J. P. McGilligan
Abstract:
We demonstrate a simple stacked scheme that enables absorption imaging through a hole in the surface of a grating magneto-optical trap (GMOT) chip, placed immediately below a micro-fabricated vacuum cell. The imaging scheme is capable of overcoming the reduced optical access and surface scatter that is associated with this chip-scale platform, while further permitting both trap** and imaging of…
▽ More
We demonstrate a simple stacked scheme that enables absorption imaging through a hole in the surface of a grating magneto-optical trap (GMOT) chip, placed immediately below a micro-fabricated vacuum cell. The imaging scheme is capable of overcoming the reduced optical access and surface scatter that is associated with this chip-scale platform, while further permitting both trap** and imaging of the atoms from a single incident laser beam. The through-hole imaging is used to characterise the impact of the reduced optical overlap volume of the GMOT in the chip-scale cell, with an outlook to an optimised atom number in low volume systems.
△ Less
Submitted 26 August, 2021;
originally announced August 2021.
-
Stand-alone vacuum cell for compact ultracold quantum technologies
Authors:
Oliver S. Burrow,
Paul F. Osborn,
Edward Boughton,
Francesco Mirando,
David P. Burt,
Paul F. Griffin,
Aidan S. Arnold,
Erling Riis
Abstract:
Compact vacuum systems are key enabling components for cold atom technologies, facilitating extremely accurate sensing applications. There has been important progress towards a truly portable compact vacuum system, however size, weight and power consumption can be prohibitively large, optical access may be limited, and active pum** is often required. Here, we present a centilitre-scale ceramic v…
▽ More
Compact vacuum systems are key enabling components for cold atom technologies, facilitating extremely accurate sensing applications. There has been important progress towards a truly portable compact vacuum system, however size, weight and power consumption can be prohibitively large, optical access may be limited, and active pum** is often required. Here, we present a centilitre-scale ceramic vacuum chamber with He-impermeable viewports and an integrated diffractive optic, enabling robust laser cooling with light from a single polarization-maintaining fibre. A cold atom demonstrator based on the vacuum cell delivers $10^7$ laser-cooled $^{87}$Rb atoms per second, using minimal electrical power. With continuous Rb gas emission active pum** yields a $10^{-7}\,$mbar equilibrium pressure, and passive pum** stabilises to $3\times 10^{-6}\,$mbar, with a $17\,$day time constant. A vacuum cell, with no Rb dispensing and only passive pum**, has currently kept a similar pressure for more than \ch{500 days}. The passive-pum** vacuum lifetime is several years, estimated from short-term He throughput, with many foreseeable improvements. This technology enables wide-ranging mobilization of ultracold quantum metrology.
△ Less
Submitted 2 September, 2021; v1 submitted 19 January, 2021;
originally announced January 2021.
-
Gouy phase-matched angular and radial mode conversion in four-wave mixing
Authors:
Rachel F. Offer,
Andrew Daffurn,
Erling Riis,
Paul F. Griffin,
Aidan S. Arnold,
Sonja Franke-Arnold
Abstract:
Studying the conversion between transverse light modes via four-wave mixing in a heated rubidium vapour, we demonstrate and explain a transfer between azimuthal and radial mode numbers. These relate to orthogonal modal dimensions, which one would not normally expect to interact. While angular momentum conservation in this nonlinear process dictates the selection rules for the angular mode number,…
▽ More
Studying the conversion between transverse light modes via four-wave mixing in a heated rubidium vapour, we demonstrate and explain a transfer between azimuthal and radial mode numbers. These relate to orthogonal modal dimensions, which one would not normally expect to interact. While angular momentum conservation in this nonlinear process dictates the selection rules for the angular mode number, the role of the radial mode number is more esoteric. We demonstrate systematically that the Gouy phase is the key to understanding this conversion, leading to strikingly different conversion behaviour in the thick and thin medium regime. Our experimental investigation of the transition between these regimes bridges the gap between previous experiments in atomic thick media and work in nonlinear crystals. Our work sets a clear starting point to explore new territory in the thick medium regime, allowing efficient radial-to-azimuthal and radial-to-radial mode conversion.
△ Less
Submitted 25 February, 2021; v1 submitted 28 July, 2020;
originally announced July 2020.
-
Laser cooling in a chip-scale platform
Authors:
J. P. McGilligan,
K. R. Moore,
A. Dellis,
G. D. Martinez,
E. de Clercq,
P. F. Griffin,
A. S. Arnold,
E. Riis,
R. Boudot,
J. Kitching
Abstract:
Chip-scale atomic devices built around micro-fabricated alkali vapor cells are at the forefront of compact metrology and atomic sensors. We demonstrate a micro-fabricated vapor cell that is actively-pumped to ultra-high-vacuum (UHV) to achieve laser cooling. A grating magneto optical trap (GMOT) is incorporated with the 4 mm-thick Si/glass vacuum cell to demonstrate the feasibility of a fully-mini…
▽ More
Chip-scale atomic devices built around micro-fabricated alkali vapor cells are at the forefront of compact metrology and atomic sensors. We demonstrate a micro-fabricated vapor cell that is actively-pumped to ultra-high-vacuum (UHV) to achieve laser cooling. A grating magneto optical trap (GMOT) is incorporated with the 4 mm-thick Si/glass vacuum cell to demonstrate the feasibility of a fully-miniaturized laser cooling platform. A two-step optical excitation process in rubidium is used to overcome surface-scatter limitations to the GMOT imaging. The unambiguous miniaturization and form-customizability made available with micro-fabricated UHV cells provide a promising platform for future compact cold-atom sensors.
△ Less
Submitted 12 May, 2020;
originally announced May 2020.
-
Resonant Very Low- and Ultra Low Frequency Digital Signal Reception Using a Portable Atomic Magnetometer
Authors:
Stuart J. Ingleby,
Iain C. Chalmers,
Terry E. Dyer,
Paul F. Griffin,
Erling Riis
Abstract:
Radio communication through attenuating media necessitates the use of very-low frequency (VLF) and ultra-low frequency (ULF) carrier bands, which are frequently used in underwater and under-ground communication applications. Quantum sensing techniques can be used to circumvent hard constraints on the size, weight and noise floor of classical signal transducers. In this low-frequency range, an opti…
▽ More
Radio communication through attenuating media necessitates the use of very-low frequency (VLF) and ultra-low frequency (ULF) carrier bands, which are frequently used in underwater and under-ground communication applications. Quantum sensing techniques can be used to circumvent hard constraints on the size, weight and noise floor of classical signal transducers. In this low-frequency range, an optically pumped atomic sample can be used to detect carrier wave modulation resonant with ground-state Zeeman splitting of alkali atoms. Using a compact, self-calibrating system we demonstrate a resonant atomic transducer for digital data encoded using binary phase- and frequency-keying of resonant carrier waves in the 200 Hz -200 kHz range. We present field trial data showing sensor noise floor, decoded data and received bit error rate, and calculate the projected range of sub-sea communication using this device.
△ Less
Submitted 6 March, 2020;
originally announced March 2020.
-
Optical characterisation of micro-fabricated Fresnel zone plates for atomic waveguides
Authors:
Victoria A. Henderson,
Matthew Y. H. Johnson,
Yogeshwar B. Kale,
Paul F. Griffin,
Erling Riis,
Aidan S. Arnold
Abstract:
We optically assess Fresnel zone plates (FZPs) that are designed to guide cold atoms. Imaging of various ring patterns produced by the FZPs gives an average RMS error in the brightest part of the ring of 3% with respect to trap depth. This residue will be due to the imaging system, incident beam shape and FZP manufacturing tolerances. Axial propagation of the potentials is presented experimentally…
▽ More
We optically assess Fresnel zone plates (FZPs) that are designed to guide cold atoms. Imaging of various ring patterns produced by the FZPs gives an average RMS error in the brightest part of the ring of 3% with respect to trap depth. This residue will be due to the imaging system, incident beam shape and FZP manufacturing tolerances. Axial propagation of the potentials is presented experimentally and through numerical simulations, illustrating prospects for atom guiding without requiring light sheets.
△ Less
Submitted 26 February, 2020;
originally announced February 2020.
-
Cold-atom clock based on a diffractive optic
Authors:
Rachel Elvin,
Gregory W. Hoth,
Michael Wright,
Ben Lewis,
James P. McGilligan,
Aidan S. Arnold,
Paul F. Griffin,
Erling Riis
Abstract:
Clocks based on cold atoms offer unbeatable accuracy and long-term stability, but their use in portable quantum technologies is hampered by a large physical footprint. Here, we use the compact optical layout of a grating magneto-optical trap (gMOT) for a precise frequency reference. The gMOT collects $10^7$ $^{87}$Rb atoms, which are subsequently cooled to $20\,μ$K in optical molasses. We opticall…
▽ More
Clocks based on cold atoms offer unbeatable accuracy and long-term stability, but their use in portable quantum technologies is hampered by a large physical footprint. Here, we use the compact optical layout of a grating magneto-optical trap (gMOT) for a precise frequency reference. The gMOT collects $10^7$ $^{87}$Rb atoms, which are subsequently cooled to $20\,μ$K in optical molasses. We optically probe the microwave atomic ground-state splitting using lin$\perp$lin polarised coherent population trap** and a Raman-Ramsey sequence. With ballistic drop distances of only $0.5\,$mm, the measured short-term fractional frequency stability is $2 \times 10 ^{-11} /\sqrtτ$.
△ Less
Submitted 3 January, 2020; v1 submitted 10 September, 2019;
originally announced September 2019.
-
Spiral bandwidth of four-wave mixing in Rb vapour
Authors:
Rachel F. Offer,
Dalius Stulga,
Erling Riis,
Sonja Franke-Arnold,
Aidan S. Arnold
Abstract:
Laguerre-Gauss beams, and more generally the orbital angular momentum of light (OAM) provide valuable research tools for optical manipulation, processing, imaging and communication. Here we explore the high-efficiency frequency conversion of OAM in a four-wave mixing process in rubidium vapour. Conservation of the OAM in the two pump beams determines the total OAM shared by the generated light fie…
▽ More
Laguerre-Gauss beams, and more generally the orbital angular momentum of light (OAM) provide valuable research tools for optical manipulation, processing, imaging and communication. Here we explore the high-efficiency frequency conversion of OAM in a four-wave mixing process in rubidium vapour. Conservation of the OAM in the two pump beams determines the total OAM shared by the generated light fields at 420 nm and 5.2 um - but not its distribution between them. We experimentally investigate the spiral bandwidth of the generated light modes as a function of pump OAM. A small pump OAM is transferred almost completely to the 420 nm beam. Increasing the total pump OAM broadens the OAM spectrum of the generated light, indicating OAM entanglement between the generated light fields. This clears the path to high-efficiency OAM entanglement between widely disparate wavelengths.
△ Less
Submitted 28 November, 2018; v1 submitted 21 May, 2018;
originally announced May 2018.
-
Vector Magnetometry Exploiting Phase-Geometry Effects in a Double-Resonance Alignment Magnetometer
Authors:
Stuart J. Ingleby,
Carolyn O'Dwyer,
Paul F. Griffin,
Aidan S. Arnold,
Erling Riis
Abstract:
Double-resonance optically pumped magnetometers are an attractive instrument for unshielded magnetic field measurements due to their wide dynamic range and high sensitivity. Use of linearly polarised pump light creates alignment in the atomic sample, which evolves in the local static magnetic field, and is driven by a resonant applied field perturbation, modulating the polarisation of transmitted…
▽ More
Double-resonance optically pumped magnetometers are an attractive instrument for unshielded magnetic field measurements due to their wide dynamic range and high sensitivity. Use of linearly polarised pump light creates alignment in the atomic sample, which evolves in the local static magnetic field, and is driven by a resonant applied field perturbation, modulating the polarisation of transmitted light. We show for the first time that the amplitude and phase of observed first- and second-harmonic components in the transmitted polarisation signal contain sufficient information to measure static magnetic field magnitude and orientation. We describe a laboratory system for experimental measurements of these effects and verify a theoretical derivation of the observed signal. We demonstrate vector field tracking under varying static field orientations and show that the static field magnitude and orientation may be observed simultaneously, with experimentally realised resolution of 1.7 pT and 0.63 mrad in the most sensitive field orientation.
△ Less
Submitted 26 February, 2018;
originally announced February 2018.
-
Optically Pumped Magnetometry in Arbitrarily Oriented Magnetic Fields
Authors:
Stuart J. Ingleby,
Iain C. Chalmers,
Carolyn O'Dwyer,
Paul F. Griffin,
Aidan S. Arnold,
Erling Riis
Abstract:
Optically pumped atomic magnetometers (OPMs) offer highly sensitive magnetic measurements using compact hardware, offering new possibilities for practical precision sensors. Double-resonance OPM operation is well suited to unshielded magnetometry, due to high sensor dynamic range. However, sensor response is highly anisotropic with variation in the orientation of the magnetic field. We present dat…
▽ More
Optically pumped atomic magnetometers (OPMs) offer highly sensitive magnetic measurements using compact hardware, offering new possibilities for practical precision sensors. Double-resonance OPM operation is well suited to unshielded magnetometry, due to high sensor dynamic range. However, sensor response is highly anisotropic with variation in the orientation of the magnetic field. We present data quantifying these effects and discuss implications for the design of practical sensors.
△ Less
Submitted 19 October, 2017;
originally announced October 2017.
-
Talbot-enhanced, maximum-visibility imaging of condensate interference
Authors:
Y. Zhai,
C. H. Carson,
V. A. Henderson,
P. F. Griffin,
E. Riis,
A. S. Arnold
Abstract:
Nearly two centuries ago Talbot first observed the fascinating effect whereby light propagating through a periodic structure generates a `carpet' of image revivals in the near field. Here we report the first observation of the spatial Talbot effect for light interacting with periodic Bose-Einstein condensate interference fringes. The Talbot effect can lead to dramatic loss of fringe visibility in…
▽ More
Nearly two centuries ago Talbot first observed the fascinating effect whereby light propagating through a periodic structure generates a `carpet' of image revivals in the near field. Here we report the first observation of the spatial Talbot effect for light interacting with periodic Bose-Einstein condensate interference fringes. The Talbot effect can lead to dramatic loss of fringe visibility in images, degrading precision interferometry, however we demonstrate how the effect can also be used as a tool to enhance visibility, as well as extend the useful focal range of matter wave detection systems by orders of magnitude. We show that negative optical densities arise from matter-wave induced lensing of detuned imaging light -- yielding Talbot-enhanced single-shot interference visibility of >135% compared to the ideal visibility for resonant light.
△ Less
Submitted 31 January, 2018; v1 submitted 25 July, 2017;
originally announced July 2017.
-
Detection of Applied and Ambient Forces with a Matterwave Magnetic-Gradiometer
Authors:
Billy I. Robertson,
Andrew R. MacKellar,
James Halket,
Anna Gribbon,
Jonathan D. Pritchard,
Aidan S. Arnold,
Erling Riis,
Paul F. Griffin
Abstract:
An atom interferometer using a Bose-Einstein condensate of $^{87}$Rb atoms is utilized for the measurement of magnetic field gradients. Composite optical pulses are used to construct a spatially symmetric Mach-Zehnder geometry. Using a biased interferometer we demonstrate the ability to measure small residual forces in our system at the position of the atoms. These are a residual magnetic field gr…
▽ More
An atom interferometer using a Bose-Einstein condensate of $^{87}$Rb atoms is utilized for the measurement of magnetic field gradients. Composite optical pulses are used to construct a spatially symmetric Mach-Zehnder geometry. Using a biased interferometer we demonstrate the ability to measure small residual forces in our system at the position of the atoms. These are a residual magnetic field gradient of 15$\pm$2 mG/cm and and an inertial acceleration of 0.08$\pm$0.02 m/s$^2$. Our method has important applications in the calibration of precision measurement devices and the reduction of systematic errors.
△ Less
Submitted 3 November, 2017; v1 submitted 24 July, 2017;
originally announced July 2017.
-
Orientational Effects on the Amplitude and Phase of Polarimeter Signals in Double Resonance Atomic Magnetometry
Authors:
Stuart J. Ingleby,
Carolyn O'Dwyer,
Paul F. Griffin,
Aidan S. Arnold,
Erling Riis
Abstract:
Double resonance optically pumped magnetometry can be used to measure static magnetic fields with high sensitivity by detecting a resonant atomic spin response to a small oscillating field perturbation. Determination of the resonant frequency yields a scalar measurement of static field ($B_0$) magnitude. We present calculations and experimental data showing that the on-resonance polarimeter signal…
▽ More
Double resonance optically pumped magnetometry can be used to measure static magnetic fields with high sensitivity by detecting a resonant atomic spin response to a small oscillating field perturbation. Determination of the resonant frequency yields a scalar measurement of static field ($B_0$) magnitude. We present calculations and experimental data showing that the on-resonance polarimeter signal of light transmitted through an atomic vapour in arbitrarily oriented $B_0$ may be modelled by considering the evolution of alignment terms in atomic polarisation. We observe that the amplitude and phase of the magnetometer signal are highly dependent upon $B_0$ orientation, and present precise measurements of the distribution of these parameters over the full 4π solid angle.
△ Less
Submitted 14 July, 2017;
originally announced July 2017.
-
High-precision control of static magnetic field magnitude, orientation, and gradient using optically pumped vapour cell magnetometry
Authors:
S. J. Ingleby,
P. F. Griffin,
A. S. Arnold,
M. Chouliara,
E. Riis
Abstract:
An integrated system of hardware and software allowing precise definition of arbitrarily oriented magnetic fields up to |B| = 1 μT within a five-layer mumetal shield is described. The system is calibrated with reference to magnetic resonance observed between Zeeman states of the 6S$_{1/2}$ F = 4 $^{133}$Cs ground state. Magnetic field definition over the full 4π solid angle is demonstrated, with o…
▽ More
An integrated system of hardware and software allowing precise definition of arbitrarily oriented magnetic fields up to |B| = 1 μT within a five-layer mumetal shield is described. The system is calibrated with reference to magnetic resonance observed between Zeeman states of the 6S$_{1/2}$ F = 4 $^{133}$Cs ground state. Magnetic field definition over the full 4π solid angle is demonstrated, with one-sigma tolerances in magnitude, orientation and gradient of δ|B| = 0.94 nT, δθ = 5.9 mrad and δ$\nabla$ B = 13.0 pT/mm, respectively. This field control is used to empirically map Mx magnetometer signal amplitude as a function of the static field (B0) orientation.
△ Less
Submitted 4 April, 2017;
originally announced April 2017.
-
Grating chips for quantum technologies
Authors:
James P. McGilligan,
Paul F. Griffin,
Rachel Elvin,
Stuart J. Ingleby,
Erling Riis,
Aidan S. Arnold
Abstract:
We have laser cooled 3$\times10^6$ $^{87}$Rb atoms to 3$μ$K in a micro-fabricated grating magneto-optical trap (GMOT), enabling future mass-deployment in highly accurate compact quantum sensors. We magnetically trap the atoms, and use Larmor spin precession for magnetic sensing in the vicinity of the atomic sample. Finally, we demonstrate an array of magneto-optical traps with a single laser beam,…
▽ More
We have laser cooled 3$\times10^6$ $^{87}$Rb atoms to 3$μ$K in a micro-fabricated grating magneto-optical trap (GMOT), enabling future mass-deployment in highly accurate compact quantum sensors. We magnetically trap the atoms, and use Larmor spin precession for magnetic sensing in the vicinity of the atomic sample. Finally, we demonstrate an array of magneto-optical traps with a single laser beam, which will be utilised for future cold atom gradiometry.
△ Less
Submitted 14 February, 2017;
originally announced February 2017.
-
Cavity-enhanced frequency up-conversion in rubidium vapour
Authors:
Rachel F. Offer,
Johnathan W. C. Conway,
Erling Riis,
Sonja Franke-Arnold,
Aidan S. Arnold
Abstract:
We report the first use of a ring cavity to both enhance the output power and dramatically narrow the linewidth ($<1\,$MHz) of blue light generated by four wave mixing in a rubidium vapour cell. We find that the high output power available in our cavity-free system leads to power broadening of the generated blue light linewidth. Our ring cavity removes this limitation, allowing high output power a…
▽ More
We report the first use of a ring cavity to both enhance the output power and dramatically narrow the linewidth ($<1\,$MHz) of blue light generated by four wave mixing in a rubidium vapour cell. We find that the high output power available in our cavity-free system leads to power broadening of the generated blue light linewidth. Our ring cavity removes this limitation, allowing high output power and narrow linewidth to be achieved concurrently. As the cavity blue light is widely tunable over the $^{85}$Rb 5S$_{1/2} \,\,F=3$ $\rightarrow$ 6P$_{3/2}$ transition, this narrow linewidth light would be suitable for second-stage laser cooling, which could be valuable for efficient $^{85}$Rb BEC production.
△ Less
Submitted 19 May, 2016; v1 submitted 17 March, 2016;
originally announced March 2016.
-
Diffraction grating characterisation for cold-atom experiments
Authors:
James P. McGilligan,
Paul F. Griffin,
Erling Riis,
Aidan S. Arnold
Abstract:
We have studied the optical properties of gratings micro-fabricated into semiconductor wafers, which can be used for simplifying cold-atom experiments. The study entailed characterisation of diffraction efficiency as a function of coating, periodicity, duty cycle and geometry using over 100 distinct gratings. The critical parameters of experimental use, such as diffraction angle and wavelength are…
▽ More
We have studied the optical properties of gratings micro-fabricated into semiconductor wafers, which can be used for simplifying cold-atom experiments. The study entailed characterisation of diffraction efficiency as a function of coating, periodicity, duty cycle and geometry using over 100 distinct gratings. The critical parameters of experimental use, such as diffraction angle and wavelength are also discussed, with an outlook to achieving optimal ultracold experimental conditions.
△ Less
Submitted 27 January, 2016;
originally announced January 2016.
-
Comparative simulations of Fresnel holography methods for atomic waveguides
Authors:
Victoria A Henderson,
Paul F Griffin,
Erling Riis,
Aidan S Arnold
Abstract:
We have simulated the optical properties of micro-fabricated Fresnel zone plates (FZPs) as an alternative to spatial light modulators (SLMs) for producing non-trivial light potentials to trap atoms within a lensless Fresnel arrangement. We show that binary (1-bit) FZPs with wavelength (1 μm) spatial resolution consistently outperform kinoforms of spatial and phase resolution comparable to commerci…
▽ More
We have simulated the optical properties of micro-fabricated Fresnel zone plates (FZPs) as an alternative to spatial light modulators (SLMs) for producing non-trivial light potentials to trap atoms within a lensless Fresnel arrangement. We show that binary (1-bit) FZPs with wavelength (1 μm) spatial resolution consistently outperform kinoforms of spatial and phase resolution comparable to commercial SLMs in root mean square error comparisons, with FZP kinoforms demonstrating increasing improvement for complex target intensity distributions. Moreover, as sub-wavelength resolution microfabrication is possible, FZPs provide an exciting possibility for the creation of static cold-atom trap** potentials useful to atomtronics, interferometry, and the study of fundamental physics.
△ Less
Submitted 27 January, 2016;
originally announced January 2016.
-
Design and fabrication of diffractive atom chips for laser cooling and trap**
Authors:
J. P. Cotter,
J. P. McGilligan,
P. F. Griffin,
I. M. Rabey,
K. Docherty,
E. Riis,
A. S. Arnold,
E. A. Hinds
Abstract:
It has recently been shown that optical reflection gratings fabricated directly into an atom chip provide a simple and effective way to trap and cool substantial clouds of atoms [1,2]. In this article we describe how the gratings are designed and micro-fabricated and we characterise their optical properties, which determine their effectiveness as a cold atom source. We use simple scalar diffractio…
▽ More
It has recently been shown that optical reflection gratings fabricated directly into an atom chip provide a simple and effective way to trap and cool substantial clouds of atoms [1,2]. In this article we describe how the gratings are designed and micro-fabricated and we characterise their optical properties, which determine their effectiveness as a cold atom source. We use simple scalar diffraction theory to understand how the morphology of the gratings determines the power in the diffracted beams.
△ Less
Submitted 21 January, 2016;
originally announced January 2016.
-
Phase-space properties of magneto-optical traps utilising micro-fabricated gratings
Authors:
James P. McGilligan,
Paul F. Griffin,
Erling Riis,
Aidan S. Arnold
Abstract:
We have used diffraction gratings to simplify the fabrication, and dramatically increase the atomic collection efficiency, of magneto-optical traps using micro-fabricated optics. The atom number enhancement was mainly due to the increased beam capture volume, afforded by the large area (4cm^2) shallow etch (200nm) binary grating chips. Here we provide a detailed theoretical and experimental invest…
▽ More
We have used diffraction gratings to simplify the fabrication, and dramatically increase the atomic collection efficiency, of magneto-optical traps using micro-fabricated optics. The atom number enhancement was mainly due to the increased beam capture volume, afforded by the large area (4cm^2) shallow etch (200nm) binary grating chips. Here we provide a detailed theoretical and experimental investigation of the on-chip magneto-optical trap temperature and density in four different chip geometries using 87Rb, whilst studying effects due to MOT radiation pressure imbalance. With optimal initial MOTs on two of the chips we obtain both large atom number (2x10^7) _and_ sub-Doppler temperatures (50uK) after optical molasses.
△ Less
Submitted 5 March, 2015;
originally announced March 2015.
-
3D map** of intensity field about the focus of a micrometer scale parabolic mirror
Authors:
Alison McDonald,
Gail McConnell,
David C. Cox,
Erling Riis,
Paul F. Griffin
Abstract:
We report on the fabrication and diffraction-limited characterization of parabolic focusing micromirrors. Sub - micron beam waists are measured for mirrors with 10 μm radius aperture and measured fixed focal lengths in the range from 24 μm to 36 μm. Optical characterization of the 3D intensity in the nearfield produced when the device is illuminated with collimated light is performed using a modif…
▽ More
We report on the fabrication and diffraction-limited characterization of parabolic focusing micromirrors. Sub - micron beam waists are measured for mirrors with 10 μm radius aperture and measured fixed focal lengths in the range from 24 μm to 36 μm. Optical characterization of the 3D intensity in the nearfield produced when the device is illuminated with collimated light is performed using a modified confocal microscope. Results are compared directly with angular spectrum simulations, yielding strong agreement between experiment and theory, and identifying the competition between diffraction and focusing in the regime probed.
△ Less
Submitted 13 January, 2015; v1 submitted 11 November, 2014;
originally announced November 2014.
-
A surface-patterned chip as a strong source of ultra-cold atoms for quantum technologies
Authors:
C. C. Nshii,
M. Vangeleyn,
J. P. Cotter,
P. F. Griffin,
E. A. Hinds,
C. N. Ironside,
P. See,
A. G. Sinclair,
E. Riis,
A. S. Arnold
Abstract:
Laser cooled atoms are central to modern precision measurements. They are also increasingly important as an enabling technology for experimental cavity quantum electrodynamics, quantum information processing and matter wave interferometry. Although significant progress has been made in miniaturising atomic metrological devices, these are limited in accuracy by their use of hot atomic ensembles and…
▽ More
Laser cooled atoms are central to modern precision measurements. They are also increasingly important as an enabling technology for experimental cavity quantum electrodynamics, quantum information processing and matter wave interferometry. Although significant progress has been made in miniaturising atomic metrological devices, these are limited in accuracy by their use of hot atomic ensembles and buffer gases. Advances have also been made in producing portable apparatus that benefit from the advantages of atoms in the microKelvin regime. However, simplifying atomic cooling and loading using microfabrication technology has proved difficult. In this letter we address this problem, realising an atom chip that enables the integration of laser cooling and trap** into a compact apparatus. Our source delivers ten thousand times more atoms than previous magneto-optical traps with microfabricated optics and, for the first time, can reach sub-Doppler temperatures. Moreover, the same chip design offers a simple way to form stable optical lattices. These features, combined with the simplicity of fabrication and the ease of operation, make these new traps a key advance in the development of cold-atom technology for high-accuracy, portable measurement devices.
△ Less
Submitted 5 November, 2013;
originally announced November 2013.
-
Demonstration of an inductively coupled ring trap for cold atoms
Authors:
J. D. Pritchard,
A. N. Dinkelaker,
A. S. Arnold,
P. F. Griffin,
E. Riis
Abstract:
We report the first demonstration of an inductively coupled magnetic ring trap for cold atoms. A uniform, ac magnetic field is used to induce current in a copper ring, which creates an opposing magnetic field that is time-averaged to produce a smooth cylindrically symmetric ring trap of radius 5 mm. We use a laser-cooled atomic sample to characterise the loading efficiency and adiabaticity of the…
▽ More
We report the first demonstration of an inductively coupled magnetic ring trap for cold atoms. A uniform, ac magnetic field is used to induce current in a copper ring, which creates an opposing magnetic field that is time-averaged to produce a smooth cylindrically symmetric ring trap of radius 5 mm. We use a laser-cooled atomic sample to characterise the loading efficiency and adiabaticity of the magnetic potential, achieving a vacuum-limited lifetime in the trap. This technique is suitable for creating scalable toroidal waveguides for applications in matterwave interferometry, offering long interaction times and large enclosed areas.
△ Less
Submitted 17 July, 2012;
originally announced July 2012.
-
Laser cooling with a single laser beam and a planar diffractor
Authors:
Matthieu Vangeleyn,
Paul F. Griffin,
Erling Riis,
Aidan S. Arnold
Abstract:
A planar triplet of diffraction gratings is used to transform a single laser beam into a four-beam tetrahedral magneto-optical trap. This `flat' pyramid diffractor geometry is ideal for future microfabrication. We demonstrate the technique by trap** and subsequently sub-Doppler cooling 87Rb atoms to 30microKelvin.
A planar triplet of diffraction gratings is used to transform a single laser beam into a four-beam tetrahedral magneto-optical trap. This `flat' pyramid diffractor geometry is ideal for future microfabrication. We demonstrate the technique by trap** and subsequently sub-Doppler cooling 87Rb atoms to 30microKelvin.
△ Less
Submitted 23 June, 2010;
originally announced June 2010.
-
Enhanced frequency up-conversion in Rb vapor
Authors:
A. Vernier,
S. Franke-Arnold,
E. Riis,
A. S. Arnold
Abstract:
We demonstrate highly efficient generation of coherent 420nm light via up-conversion of near-infrared lasers in a hot rubidium vapor cell. By optimizing pump polarizations and frequencies we achieve a single-pass conversion efficiency of 260% per Watt, significantly higher than in previous experiments. A full exploration of the coherent light generation and fluorescence as a function of both pump…
▽ More
We demonstrate highly efficient generation of coherent 420nm light via up-conversion of near-infrared lasers in a hot rubidium vapor cell. By optimizing pump polarizations and frequencies we achieve a single-pass conversion efficiency of 260% per Watt, significantly higher than in previous experiments. A full exploration of the coherent light generation and fluorescence as a function of both pump frequencies reveals that coherent blue light is generated close to 85Rb two-photon resonances, as predicted by theory, but at high vapor pressure is suppressed in spectral regions that do not support phase matching or exhibit single-photon Kerr refraction. Favorable scaling of our current 1mW blue beam power with additional pump power is predicted.
△ Less
Submitted 30 July, 2010; v1 submitted 4 November, 2009;
originally announced November 2009.
-
Single-laser, one beam, tetrahedral magneto-optical trap
Authors:
Matthieu Vangeleyn,
Paul F. Griffin,
Erling Riis,
Aidan S. Arnold
Abstract:
We have realised a 4-beam pyramidal magneto-optical trap ideally suited for future microfabrication. Three mirrors split and steer a single incoming beam into a tripod of reflected beams, allowing trap** in the four-beam overlap volume. We discuss the influence of mirror angle on cooling and trap**, finding optimum efficiency in a tetrahedral configuration. We demonstrate the technique using…
▽ More
We have realised a 4-beam pyramidal magneto-optical trap ideally suited for future microfabrication. Three mirrors split and steer a single incoming beam into a tripod of reflected beams, allowing trap** in the four-beam overlap volume. We discuss the influence of mirror angle on cooling and trap**, finding optimum efficiency in a tetrahedral configuration. We demonstrate the technique using an ex-vacuo mirror system to illustrate the previously inaccessible supra-plane pyramid MOT configuration. Unlike standard pyramidal MOTs both the pyramid apex and its mirror angle are non-critical and our MOT offers improved molasses free from atomic shadows in the laser beams. The MOT scheme naturally extends to a 2-beam refractive version with high optical access. For quantum gas experiments, the mirror system could also be used for a stable 3D tetrahedral optical lattice.
△ Less
Submitted 18 May, 2009;
originally announced May 2009.
-
A versatile and reliably re-usable ultrahigh vacuum viewport
Authors:
K. J. Weatherill,
J. D. Pritchard,
C. S. Adams,
P. F. Griffin,
U. Dammalapati,
E. Riis
Abstract:
We present a viewport for use in Ultra-high vacuum (UHV) based upon the preflattened solder seal design presented in earlier work, Cox et al. Rev. Sci. Inst. 74, 3185 (2003). The design features significant modifications to improve long term performance. The windows have been leak tested to less than 10^-10 atm cm^3/s . From atom number measurements in an optical dipole trap loaded from a vapor…
▽ More
We present a viewport for use in Ultra-high vacuum (UHV) based upon the preflattened solder seal design presented in earlier work, Cox et al. Rev. Sci. Inst. 74, 3185 (2003). The design features significant modifications to improve long term performance. The windows have been leak tested to less than 10^-10 atm cm^3/s . From atom number measurements in an optical dipole trap loaded from a vapor cell magneto-optical trap (MOT) inside a vacuum chamber accommodating these viewports, we measure a trap lifetime of 9.5s suggesting a pressure of around 10^-10 Torr limited by background Rubidium vapor pressure. We also present a simplified design where the UHV seal is made directly to a vacuum pipe
△ Less
Submitted 4 December, 2008;
originally announced December 2008.
-
Dark dynamic acousto-optic ring lattices for ultracold atoms
Authors:
N. Houston,
E. Riis,
A. S. Arnold
Abstract:
We demonstrate the optical generation of dynamic dark optical ring lattices, which do not require Laguerre-Gauss beams, large optical coherence lengths or interferometric stability. Simple control signals lead to spatial modulation and reproducible rotation, offering manifold possibilities for complex dynamic ring lattices. In conjunction with a magnetic trap, these scanned 2D intensity distribu…
▽ More
We demonstrate the optical generation of dynamic dark optical ring lattices, which do not require Laguerre-Gauss beams, large optical coherence lengths or interferometric stability. Simple control signals lead to spatial modulation and reproducible rotation, offering manifold possibilities for complex dynamic ring lattices. In conjunction with a magnetic trap, these scanned 2D intensity distributions from a single laser beam will enable precision trap** and manipulation of ultracold species using blue-detuned light. The technique is ideal for azimuthal ratchet, Mott insulator and persistent current experiments with quantum degenerate gases.
△ Less
Submitted 20 June, 2008;
originally announced June 2008.
-
A Smooth, Inductively Coupled Ring Trap for Atoms
Authors:
P. F. Griffin,
E. Riis,
A. S. Arnold
Abstract:
We propose and numerically investigate a scalable ring trap for cold atoms that surmounts problems of roughness of the potential and end--effects of trap wires. A stable trap** potential is formed about an electrically isolated, conducting loop in an ac magnetic field by time averaging the superposition of the external and induced magnetic fields. We investigate the use of additional fields to…
▽ More
We propose and numerically investigate a scalable ring trap for cold atoms that surmounts problems of roughness of the potential and end--effects of trap wires. A stable trap** potential is formed about an electrically isolated, conducting loop in an ac magnetic field by time averaging the superposition of the external and induced magnetic fields. We investigate the use of additional fields to eliminate Majorana spin flip losses and to create novel trap** geometries. The possibility of micro--fabrication of these ring traps offers the prospect of develo** Sagnac atom interferometry in atom--chip devices.
△ Less
Submitted 6 March, 2008;
originally announced March 2008.