Showing 1–26 of 26 results for author: Reich, S

Longitudinal Polaritons in Crystals

Authors: Eduardo B. Barros, Stephanie Reich

Abstract: The collective excitations of solids are classified as longitudinal and transverse depending on their relative polarization and propagation direction. This seemingly formal classification results in surprisingly distinct types of excitations if calculated within the Coulomb gauge. Transverse modes couple to free-space photons and hybridize into polaritons for strong light-matter coupling. Longitud… ▽ More The collective excitations of solids are classified as longitudinal and transverse depending on their relative polarization and propagation direction. This seemingly formal classification results in surprisingly distinct types of excitations if calculated within the Coulomb gauge. Transverse modes couple to free-space photons and hybridize into polaritons for strong light-matter coupling. Longitudinal modes, in contrast, are seen as pure matter excitations that produce a dynamic polarization inside the material without photon coupling. Here we show that both longitudinal and transverse modes become polaritons in the explicitly covariant Lorenz gauge. Longitudinal excitations couple to longitudinal and scalar photons, which have been considered elusive so far. We show that the dipolar excitations become three-fold degenerate in the long-wavelength limit when including all photonic degrees of freedom, as expected from symmetry. Our findings demonstrate how choosing a gauge determines our thinking about materials excitations and how gauge fixing reveals new pathways for tailoring polaritons in crystals, metamaterials, and surfaces. Longitudinal polaritons will interact with longitudinal near fields located at surfaces, which provides additional excitation channels to engineer scanning near-field microscopy and surface-enhanced spectroscopy. △ Less

Submitted 15 April, 2024; v1 submitted 6 November, 2023; originally announced November 2023.

Strong Coupling of Two-Dimensional Excitons and Plasmonic Photonic Crystals: Microscopic Theory Reveals Triplet Spectra

Authors: Lara Greten, Robert Salzwedel, Tobias Göde, David Greten, Stephanie Reich, Stephen Hughes, Malte Selig, Andreas Knorr

Abstract: Monolayers of transition metal dichalcogenides (TMDC) are direct-gap semiconductors with strong light-matter interactions featuring tightly bound excitons, while plasmonic crystals (PCs), consisting of metal nanoparticles that act as meta-atoms, exhibit collective plasmon modes and allow one to tailor electric fields on the nanoscale. Recent experiments show that TMDC-PC hybrids can reach the stro… ▽ More Monolayers of transition metal dichalcogenides (TMDC) are direct-gap semiconductors with strong light-matter interactions featuring tightly bound excitons, while plasmonic crystals (PCs), consisting of metal nanoparticles that act as meta-atoms, exhibit collective plasmon modes and allow one to tailor electric fields on the nanoscale. Recent experiments show that TMDC-PC hybrids can reach the strong-coupling limit between excitons and plasmons forming new quasiparticles, so-called plexcitons. To describe this coupling theoretically, we develop a self-consistent Maxwell-Bloch theory for TMDC-PC hybrid structures, which allows us to compute the scattered light in the near- and far-field explicitly and provide guidance for experimental studies. Our calculations reveal a spectral splitting signature of strong coupling of more than $100\,$meV in gold-MoSe$_2$ structures with $30\,$nm nanoparticles, manifesting in a hybridization of exciton and plasmon into two effective plexcitonic bands. In addition to the hybridized states, we find a remaining excitonic mode with significantly smaller coupling to the plasmonic near-field, emitting directly into the far-field. Thus, hybrid spectra in the strong coupling regime can contain three emission peaks. △ Less

Submitted 18 September, 2023; originally announced September 2023.

Comments: 16 pages, 6 figures

Collective States in Molecular Monolayers on 2D Materials

Authors: Sabrina Juergensen, Moritz Kessens, Charlotte Berrezueta-Palacios, Nikolai Severin, Sumaya Ifland, Jürgen P. Rabe, Niclas S. Mueller, Stephanie Reich

Abstract: Collective excited states form in organic two-dimensional layers through the Coulomb coupling of the molecular transition dipole moments. They manifest as characteristic strong and narrow peaks in the excitation and emission spectra that are shifted to lower energies compared to the monomer transition. We study experimentally and theoretically how robust the collective states are against homogeneo… ▽ More Collective excited states form in organic two-dimensional layers through the Coulomb coupling of the molecular transition dipole moments. They manifest as characteristic strong and narrow peaks in the excitation and emission spectra that are shifted to lower energies compared to the monomer transition. We study experimentally and theoretically how robust the collective states are against homogeneous and inhomogeneous broadening as well as spatial disorder that occur in real molecular monolayers. Using a microscopic model for a two-dimensional dipole lattice in real space we calculate the properties of collective states and their extinction spectra. We find that the collective states persist even for 1-10% random variation in the molecular position and in the transition frequency, with similar peak position and integrated intensity as for the perfectly ordered system. We measure the optical response of a monolayer of the perylene-derivative MePTCDI on two-dimensional materials. On the wide band-gap insulator hexagonal boron nitride it shows strong emission from the collective state with a line width that is dominated by the inhomogeneous broadening of the molecular state. When using the semimetal graphene as a substrate, however, the luminescence is completely quenched. By combining optical absorption, luminescence, and multi-wavelength Raman scattering we verify that the MePTCDI molecules form very similar collective monolayer states on hexagonal boron nitride and graphene substrates, but on graphene the line width is dominated by non-radiative excitation transfer from the molecules to the substrate. Our study highlights the transition from the localized molecular state of the monomer to a delocalized collective state in the two-dimensional molecular lattice that is entirely based on Coulomb coupling between optically active excitations of the electrons or molecular vibrations. △ Less

Submitted 14 August, 2023; v1 submitted 18 June, 2023; originally announced June 2023.

Nanomechanical absorption spectroscopy of 2D materials with femtowatt sensitivity

Authors: Jan N. Kirchhof, Yuefeng Yu, Denis Yagodkin, Nele Stetzuhn, Daniel B. de Araújo, Kostas Kanellopulos, Samuel Manas-Valero, Eugenio Coronado, Herre van der Zant, Stephanie Reich, Silvan Schmid, Kirill I. Bolotin

Abstract: Nanomechanical spectroscopy (NMS) is a recently developed approach to determine optical absorption spectra of nanoscale materials via mechanical measurements. It is based on measuring changes in the resonance frequency of a membrane resonator vs. the photon energy of incoming light. This method is a direct measurement of absorption, which has practical advantages compared to common optical spectro… ▽ More Nanomechanical spectroscopy (NMS) is a recently developed approach to determine optical absorption spectra of nanoscale materials via mechanical measurements. It is based on measuring changes in the resonance frequency of a membrane resonator vs. the photon energy of incoming light. This method is a direct measurement of absorption, which has practical advantages compared to common optical spectroscopy approaches. In the case of two-dimensional (2D) materials, NMS overcomes limitations inherent to conventional optical methods, such as the complications associated with measurements at high magnetic fields and low temperatures. In this work, we develop a protocol for NMS of 2D materials that yields two orders of magnitude improved sensitivity compared to previous approaches, while being simpler to use. To this end, we use electrical sample actuation, which simplifies the experiment and provides a reliable calibration for greater accuracy. Additionally, the use of low-stress silicon nitride membranes as our substrate reduces the noise-equivalent power to $NEP = 890 fW/\sqrt{Hz}$, comparable to commercial semiconductor photodetectors. We use our approach to spectroscopically characterize a two-dimensional transition metal dichalcogenide (WS$_2$), a layered magnetic semiconductor (CrPS$_4$), and a plasmonic supercrystal consisting of gold nanoparticles. △ Less

Submitted 28 January, 2023; originally announced January 2023.

Nanomechanical spectroscopy of 2D materials

Authors: Jan N. Kirchhof, Yuefeng Yu, Gabriel Antheaume, Georgy Gordeev, Denis Yagodkin, Peter Elliott, Daniel B. de Araújo, Sangeeta Sharma, Stephanie Reich, Kirill I. Bolotin

Abstract: We introduce a nanomechanical platform for fast and sensitive measurements of the spectrally-resolved optical dielectric function of 2D materials. At the heart of our approach is a suspended 2D material integrated into a nanomechanical resonator illuminated by a wavelength-tunable laser source. From the heating-related frequency shift of the resonator as well as its optical reflection measured as… ▽ More We introduce a nanomechanical platform for fast and sensitive measurements of the spectrally-resolved optical dielectric function of 2D materials. At the heart of our approach is a suspended 2D material integrated into a nanomechanical resonator illuminated by a wavelength-tunable laser source. From the heating-related frequency shift of the resonator as well as its optical reflection measured as a function of photon energy, we obtain the real and imaginary parts of the dielectric function. Our measurements are unaffected by substrate-related screening and do not require any assumptions on the underling optical constants. This fast ($τ_{rise}$ $\sim$ 135 ns), sensitive (noise-equivalent power = 90 $\frac{pW}{\sqrt{Hz}}$ ), and broadband (1.2 $-$ 3.1 eV, extendable to UV-THz) method provides an attractive alternative to spectroscopic or ellipsometric characterisation techniques. △ Less

Submitted 26 September, 2022; v1 submitted 14 March, 2022; originally announced March 2022.

Bulk morphology of porous materials at sub-micrometer scale studied by multi-modal X-ray imaging with Hartmann masks

Authors: M. Zakharova, A. Mikhaylov, S. Reich, A. Plech, D. Kunka

Abstract: We present the quantitative investigation of the submicron structure in the bulk of porous graphite by using the scattering signal in the multi-modal X-ray imaging with Hartmann masks. By scanning the correlation length and measuring the mask visibility reduction, we obtain average pore size, relative pore fraction, fractal dimension, and Hurst exponent of the structure. Profiting from the dimensi… ▽ More We present the quantitative investigation of the submicron structure in the bulk of porous graphite by using the scattering signal in the multi-modal X-ray imaging with Hartmann masks. By scanning the correlation length and measuring the mask visibility reduction, we obtain average pore size, relative pore fraction, fractal dimension, and Hurst exponent of the structure. Profiting from the dimensionality of the mask, we apply the method to study pore size anisotropy. The measurements were performed in a simple and flexible imaging setup with relaxed requirements on beam coherence. △ Less

Submitted 14 October, 2021; originally announced October 2021.

Comments: article: 6 pages, 3 figures, supplemental: 5 pages, 4 figures

Combining machine learning and data assimilation to forecast dynamical systems from noisy partial observations

Authors: Georg A. Gottwald, Sebastian Reich

Abstract: We present a supervised learning method to learn the propagator map of a dynamical system from partial and noisy observations. In our computationally cheap and easy-to-implement framework a neural network consisting of random feature maps is trained sequentially by incoming observations within a data assimilation procedure. By employing Takens' embedding theorem, the network is trained on delay co… ▽ More We present a supervised learning method to learn the propagator map of a dynamical system from partial and noisy observations. In our computationally cheap and easy-to-implement framework a neural network consisting of random feature maps is trained sequentially by incoming observations within a data assimilation procedure. By employing Takens' embedding theorem, the network is trained on delay coordinates. We show that the combination of random feature maps and data assimilation, called RAFDA, outperforms standard random feature maps for which the dynamics is learned using batch data. △ Less

Submitted 2 September, 2021; v1 submitted 7 August, 2021; originally announced August 2021.

Learning effective stochastic differential equations from microscopic simulations: linking stochastic numerics to deep learning

Authors: Felix Dietrich, Alexei Makeev, George Kevrekidis, Nikolaos Evangelou, Tom Bertalan, Sebastian Reich, Ioannis G. Kevrekidis

Abstract: We identify effective stochastic differential equations (SDE) for coarse observables of fine-grained particle- or agent-based simulations; these SDE then provide useful coarse surrogate models of the fine scale dynamics. We approximate the drift and diffusivity functions in these effective SDE through neural networks, which can be thought of as effective stochastic ResNets. The loss function is in… ▽ More We identify effective stochastic differential equations (SDE) for coarse observables of fine-grained particle- or agent-based simulations; these SDE then provide useful coarse surrogate models of the fine scale dynamics. We approximate the drift and diffusivity functions in these effective SDE through neural networks, which can be thought of as effective stochastic ResNets. The loss function is inspired by, and embodies, the structure of established stochastic numerical integrators (here, Euler-Maruyama and Milstein); our approximations can thus benefit from backward error analysis of these underlying numerical schemes. They also lend themselves naturally to "physics-informed" gray-box identification when approximate coarse models, such as mean field equations, are available. Existing numerical integration schemes for Langevin-type equations and for stochastic partial differential equations (SPDE) can also be used for training; we demonstrate this on a stochastically forced oscillator and the stochastic wave equation. Our approach does not require long trajectories, works on scattered snapshot data, and is designed to naturally handle different time steps per snapshot. We consider both the case where the coarse collective observables are known in advance, as well as the case where they must be found in a data-driven manner. △ Less

Submitted 24 July, 2022; v1 submitted 10 June, 2021; originally announced June 2021.

Comments: 38 pages, includes supplemental material

Plasmon-Polaritons in Nanoparticle Supercrystals: Microscopic Quantum Theory Beyond the Dipole Approximation

Authors: Eduardo B. Barros, Bruno G. Vieira, Niclas S. Mueller, Stephanie Reich

Abstract: Crystals of plasmonic metal nanoparticles have intriguing optical properties. They reach the regimes of ultrastrong and deep strong light-matter coupling, where the photonic states need to be included in the simulation of material properties. We propose a quantum description of the plasmon polaritons in supercrystals that starts from the dipole and quadrupole excitations of the nanoparticle buildi… ▽ More Crystals of plasmonic metal nanoparticles have intriguing optical properties. They reach the regimes of ultrastrong and deep strong light-matter coupling, where the photonic states need to be included in the simulation of material properties. We propose a quantum description of the plasmon polaritons in supercrystals that starts from the dipole and quadrupole excitations of the nanoparticle building blocks and their coupling to photons. Our model excellently reproduces results of finite difference time domain simulations. It provides detailed insight into the emergence of the polariton states. Using the example of a face centered cubic crystals we show that the dipole and quadrupole states mix in many high symmetry directions of the Brilouin zone. A proper description of the plasmon and plasmon-polariton band structure is only possible when including the quadrupole-derived states. Our model leads to an expression of the reduced coupling strength in nanoparticle supercrystals that we show to enter the deep strong coupling regime for metal fill fractions above $0.8$. In addition to the plasmon-polariton energies we analyse the relative contributions of the dipole, quadrupole, and photonic states to their eigenfunctions and are able to demonstrate the decoupling of light in the deep strong coupling regime. Our results pave the way for a better understanding of the quantum properties of metallic nanoparticle supercrystals in the ultrastrong and deep-strong coupling regime. △ Less

Submitted 16 April, 2021; originally announced April 2021.

Comments: 30 pages, 6 figures

Journal ref: Phys. Rev. B 104, 035403 (2021)

Selection rules for structured light in nanooligomers and other nanosystems

Authors: S. Reich, N. S. Mueller, M. Bubula

Abstract: Structured light are custom light fields where the phase, polarization, and intensity vary with position. It has been used for nanotweezers, nanoscale imaging, and quantum information technology, but its role in exciting optical transitions in materials has been little examined so far. Here we use group theory to derive the optical selection rules for nanosystems that get excited by structured lig… ▽ More Structured light are custom light fields where the phase, polarization, and intensity vary with position. It has been used for nanotweezers, nanoscale imaging, and quantum information technology, but its role in exciting optical transitions in materials has been little examined so far. Here we use group theory to derive the optical selection rules for nanosystems that get excited by structured light. If the size of the nanostructure is comparable to the light wavelength, it will sample the full beam profile during excitation with profound consequences on optical excitations. Using nanooligomers as model nanosystems, we show that structured light excites optical transitions that are forbidden for linearly polarized or unpolarized light. Such dipole forbidden modes have longer lifetimes and narrower resonances than dipole allowed transitions. We derive symmetry-adapted eigenmodes for nanooligomers containing up to six monomers. Our study includes tables with selection rules for cylindrical vector beams, for beams with orbital angular momentum, and for field retardation along the propagation direction. We discuss multi-photon processes of nonlinear optics in addition to one-photon absorption. Structured light will unlock a broad range of excitations in nanooligomers and other nanostructures that are currently inaccessible to optical studies. △ Less

Submitted 15 February, 2021; originally announced February 2021.

Journal ref: ACS Photonics 7 (2020) 1537

Supervised learning from noisy observations: Combining machine-learning techniques with data assimilation

Authors: Georg A. Gottwald, Sebastian Reich

Abstract: Data-driven prediction and physics-agnostic machine-learning methods have attracted increased interest in recent years achieving forecast horizons going well beyond those to be expected for chaotic dynamical systems. In a separate strand of research data-assimilation has been successfully used to optimally combine forecast models and their inherent uncertainty with incoming noisy observations. The… ▽ More Data-driven prediction and physics-agnostic machine-learning methods have attracted increased interest in recent years achieving forecast horizons going well beyond those to be expected for chaotic dynamical systems. In a separate strand of research data-assimilation has been successfully used to optimally combine forecast models and their inherent uncertainty with incoming noisy observations. The key idea in our work here is to achieve increased forecast capabilities by judiciously combining machine-learning algorithms and data assimilation. We combine the physics-agnostic data-driven approach of random feature maps as a forecast model within an ensemble Kalman filter data assimilation procedure. The machine-learning model is learned sequentially by incorporating incoming noisy observations. We show that the obtained forecast model has remarkably good forecast skill while being computationally cheap once trained. Going beyond the task of forecasting, we show that our method can be used to generate reliable ensembles for probabilistic forecasting as well as to learn effective model closure in multi-scale systems. △ Less

Submitted 8 March, 2021; v1 submitted 14 July, 2020; originally announced July 2020.

Interacting particle solutions of Fokker-Planck equations through gradient-log-density estimation

Authors: Dimitra Maoutsa, Sebastian Reich, Manfred Opper

Abstract: Fokker-Planck equations are extensively employed in various scientific fields as they characterise the behaviour of stochastic systems at the level of probability density functions. Although broadly used, they allow for analytical treatment only in limited settings, and often is inevitable to resort to numerical solutions. Here, we develop a computational approach for simulating the time evolution… ▽ More Fokker-Planck equations are extensively employed in various scientific fields as they characterise the behaviour of stochastic systems at the level of probability density functions. Although broadly used, they allow for analytical treatment only in limited settings, and often is inevitable to resort to numerical solutions. Here, we develop a computational approach for simulating the time evolution of Fokker-Planck solutions in terms of a mean field limit of an interacting particle system. The interactions between particles are determined by the gradient of the logarithm of the particle density, approximated here by a novel statistical estimator. The performance of our method shows promising results, with more accurate and less fluctuating statistics compared to direct stochastic simulations of comparable particle number. Taken together, our framework allows for effortless and reliable particle-based simulations of Fokker-Planck equations in low and moderate dimensions. The proposed gradient-log-density estimator is also of independent interest, for example, in the context of optimal control. △ Less

Submitted 1 June, 2020; originally announced June 2020.

Comments: 34 pages, 8 figures

MSC Class: 82C80; 37M05; 37H05; 60H35; 65C35; 65N75

GP-ETAS: Semiparametric Bayesian inference for the spatio-temporal Epidemic Type Aftershock Sequence model

Authors: Christian Molkenthin, Christian Donner, Sebastian Reich, Gert Zöller, Sebastian Hainzl, Matthias Holschneider, Manfred Opper

Abstract: The spatio-temporal Epidemic Type Aftershock Sequence (ETAS) model is widely used to describe the self-exciting nature of earthquake occurrences. While traditional inference methods provide only point estimates of the model parameters, we aim at a full Bayesian treatment of model inference, allowing naturally to incorporate prior knowledge and uncertainty quantification of the resulting estimates.… ▽ More The spatio-temporal Epidemic Type Aftershock Sequence (ETAS) model is widely used to describe the self-exciting nature of earthquake occurrences. While traditional inference methods provide only point estimates of the model parameters, we aim at a full Bayesian treatment of model inference, allowing naturally to incorporate prior knowledge and uncertainty quantification of the resulting estimates. Therefore, we introduce a highly flexible, non-parametric representation for the spatially varying ETAS background intensity through a Gaussian process (GP) prior. Combined with classical triggering functions this results in a new model formulation, namely the GP-ETAS model. We enable tractable and efficient Gibbs sampling by deriving an augmented form of the GP-ETAS inference problem. This novel sampling approach allows us to assess the posterior model variables conditioned on observed earthquake catalogues, i.e., the spatial background intensity and the parameters of the triggering function. Empirical results on two synthetic data sets indicate that GP-ETAS outperforms standard models and thus demonstrate the predictive power for observed earthquake catalogues including uncertainty quantification for the estimated parameters. Finally, a case study for the l'Aquila region, Italy, with the devastating event on 6 April 2009, is presented. △ Less

Submitted 26 May, 2020; originally announced May 2020.

Impact of Substrate on Tip-enhanced Raman Spectroscopy --- A Comparison of Frequency Domain Simulations and Graphene Measurements

Authors: Hudson Miranda, Cassiano Rabelo, Luiz Gustavo Cancado, Thiago L. Vasconcelos, Bruno S. Oliveira, Florian Schulz, Holger Lange, Stephanie Reich, Patryk Kusch, Ado Jorio

Abstract: Tip-enhanced Raman spectroscopy (TERS) has reached nanometer spatial resolution for measurements performed at ambient conditions and sub-nanometer resolution at ultra high vacuum. Super-resolution (beyond the tip apex diameter) TERS has been obtained, mostly in the gap mode configuration, where a conductive substrate localizes the electric fields. Here we present experimental and theoretical TERS… ▽ More Tip-enhanced Raman spectroscopy (TERS) has reached nanometer spatial resolution for measurements performed at ambient conditions and sub-nanometer resolution at ultra high vacuum. Super-resolution (beyond the tip apex diameter) TERS has been obtained, mostly in the gap mode configuration, where a conductive substrate localizes the electric fields. Here we present experimental and theoretical TERS to explore the field distribution responsible for spectral enhancement. We use gold tips of $40\pm 10 \ \text{nm}$ apex diameter to measure TERS on graphene, a spatially delocalized two-dimensional sample, sitting on different substrates: (i) glass, (ii) a thin layer of gold and (iii) a surface covered with $12\ \text{nm}$ diameter gold spheres, for which $6\ \text{nm}$ resolution is achieved at ambient conditions. The super-resolution is due to the field configuration resulting from the coupled tip-sample-substrate system, exhibiting a non-trivial spatial surface distribution. The field distribution and the symmetry selection rules are different for non-gap vs. gap mode configurations. This influences the overall enhancement which depends on the Raman mode symmetry and substrate structure. △ Less

Submitted 18 January, 2020; originally announced January 2020.

Comments: 8 pages, 7 figures

Journal ref: Phys. Rev. Research 2, 023408 (2020)

Convergence Tests for Transdimensional Markov Chains in Geoscience Imaging

Authors: Márk Somogyvári, Sebastian Reich

Abstract: Classic inversion methods adjust a model with a predefined number of parameters to the observed data. With transdimensional inversion algorithms such as the reversible-jump Markov Chain Monte Carlo (rjMCMC), it is possible to vary this number during the inversion and to interpret the observations in a more flexible way. Geoscience imaging applications use this behaviour to automatically adjust mod… ▽ More Classic inversion methods adjust a model with a predefined number of parameters to the observed data. With transdimensional inversion algorithms such as the reversible-jump Markov Chain Monte Carlo (rjMCMC), it is possible to vary this number during the inversion and to interpret the observations in a more flexible way. Geoscience imaging applications use this behaviour to automatically adjust model resolution to the inhomogeneities of the investigated system, while kee** the model parameters on an optimal level. The rjMCMC algorithm produces an ensemble as result, a set of model realizations which together represent the posterior probability distribution of the investigated problem. The realizations are evolved via sequential updates from a randomly chosen initial solution, and converge toward the target posterior distribution of the inverse problem. Up to a point in the chain, the realizations may be strongly biased by the initial model, and have to be discarded from the final ensemble. With convergence assessment techniques, this point in the chain can be identified. Transdimensional MCMC methods produce ensembles which are not suitable for classic convergence assessment techniques because of the changes in parameter numbers. To overcome this hurdle, three solutions are introduced to convert model realizations to a common dimensionality while maintaining the statistical characteristics of the ensemble. A scalar, a vector and a matrix representation for models is presented, inferred from tomographic subsurface investigations, and three classic convergence assessment techniques are applied on them. It is shown that appropriately chosen scalar conversions of the models could retain similar statistical ensemble properties as geologic projections created by rasterization. △ Less

Submitted 30 August, 2019; originally announced August 2019.

Journal ref: Mathematical Geosciences (2019): 1-18

Photoswitchable Single-Walled Carbon Nanotubes for Super-Resolution Microscopy in the Near-Infrared

Authors: Antoine Godin, Antonio Setaro, Morgane Gandil, Rainer Haag, Mohsen Adeli, Stephanie Reich, Laurent Cognet

Abstract: The design of single-molecule photoswitchable emitters was the first milestone toward the advent of single-molecule localization microscopy that sets a new paradigm in the field of optical imaging. Several photoswitchable emitters have been developed but they all fluoresce in the visible or far-red ranges, missing the desirable near-infrared window where biological tissues are most transparent. Mo… ▽ More The design of single-molecule photoswitchable emitters was the first milestone toward the advent of single-molecule localization microscopy that sets a new paradigm in the field of optical imaging. Several photoswitchable emitters have been developed but they all fluoresce in the visible or far-red ranges, missing the desirable near-infrared window where biological tissues are most transparent. Moreover, photocontrol of individual emitters in the near-infrared would be highly desirable for elementary optical molecular switches or information storage elements since most communication data transfer protocols are established in this spectral range. Here we introduce a novel type of hybrid nanomaterials consisting of single-wall carbon nanotubes covalently functionalized with photo-switching molecules that are used to control the intrinsic luminescence of the single nanotubes in the near-infrared (beyond 1 $μ$m). We provide proof-of-concept of localization microscopy based on these bright photoswitchable near-infrared emitters. △ Less

Submitted 26 March, 2019; originally announced March 2019.

Particle filters for high-dimensional geoscience applications: a review

Authors: Peter Jan van Leeuwen, Hans R. Künsch, Lars Nerger, Roland Potthast, Sebastian Reich

Abstract: Particle filters contain the promise of fully nonlinear data assimilation. They have been applied in numerous science areas, but their application to the geosciences has been limited due to their inefficiency in high-dimensional systems in standard settings. However, huge progress has been made, and this limitation is disappearing fast due to recent developments in proposal densities, the use of i… ▽ More Particle filters contain the promise of fully nonlinear data assimilation. They have been applied in numerous science areas, but their application to the geosciences has been limited due to their inefficiency in high-dimensional systems in standard settings. However, huge progress has been made, and this limitation is disappearing fast due to recent developments in proposal densities, the use of ideas from (optimal) transportation, the use of localisation and intelligent adaptive resampling strategies. Furthermore, powerful hybrids between particle filters and ensemble Kalman filters and variational methods have been developed. We present a state of the art discussion of present efforts of develo** particle filters for highly nonlinear geoscience state-estimation problems with an emphasis on atmospheric and oceanic applications, including many new ideas, derivations, and unifications, highlighting hidden connections, and generating a valuable tool and guide for the community. Initial experiments show that particle filters can be competitive with present-day methods for numerical weather prediction suggesting that they will become mainstream soon. △ Less

Submitted 13 April, 2019; v1 submitted 27 July, 2018; originally announced July 2018.

Comments: Review paper, 36 pages, 9 figures, Resubmitted to Q.J.Royal Meteorol. Soc

MSC Class: 62M86

Re-examination of Bregman functions and new properties of their divergences

Authors: Daniel Reem, Simeon Reich, Alvaro De Pierro

Abstract: The Bregman divergence (Bregman distance, Bregman measure of distance) is a certain useful substitute for a distance, obtained from a well-chosen function (the "Bregman function"). Bregman functions and divergences have been extensively investigated during the last decades and have found applications in optimization, operations research, information theory, nonlinear analysis, machine learning and… ▽ More The Bregman divergence (Bregman distance, Bregman measure of distance) is a certain useful substitute for a distance, obtained from a well-chosen function (the "Bregman function"). Bregman functions and divergences have been extensively investigated during the last decades and have found applications in optimization, operations research, information theory, nonlinear analysis, machine learning and more. This paper re-examines various aspects related to the theory of Bregman functions and divergences. In particular, it presents many sufficient conditions which allow the construction of Bregman functions in a general setting and introduces new Bregman functions (such as a negative iterated log entropy). Moreover, it sheds new light on several known Bregman functions such as quadratic entropies, the negative Havrda-Charvát-Tsallis entropy, and the negative Boltzmann-Gibbs-Shannon entropy, and it shows that the negative Burg entropy, which is not a Bregman function according to the classical theory but nevertheless is known to have "Bregmanian properties", can, by our re-examination of the theory, be considered as a Bregman function. Our analysis yields several by-products of independent interest such as the introduction of the concept of relative uniform convexity (a certain generalization of uniform convexity), new properties of uniformly and strongly convex functions, and results in Banach space theory. △ Less

Submitted 8 April, 2019; v1 submitted 1 March, 2018; originally announced March 2018.

Comments: Correction of a few very minor inaccuracies; added journal details (volume, page numbers, etc.); some references were updated

MSC Class: 52A41; 52B55; 46N10; 90C25; 90C30; 46T99; 47N10; 49M37; 26B25; 58C05 ACM Class: G.1.6; H.1.1; J.2

Journal ref: Optimization 68 (2019), 279--348

A Shack-Hartmann sensor for single-shot multi-contrast imaging with hard X-rays

Authors: Tomy dos Santos Rolo, Stefan Reich, Dmitry Karpov, Sergey Gasilov, Danays Kunka, Edwin Fohtung, Tilo Baumbach, Anton Plech

Abstract: An array of compound refractive X-ray lenses (CRL) with 20x20 lenslets, a focal distance of 20 cm and a visibility of 0.93 is presented. It can be used as a Shack-Hartmann sensor for hard X-rays (SHARX) for wavefront sensing and permits for true single-shot multi-contrast imaging the dynamics of materials with a spatial resolution in the micrometer range, sensitivity on nanosized structures and te… ▽ More An array of compound refractive X-ray lenses (CRL) with 20x20 lenslets, a focal distance of 20 cm and a visibility of 0.93 is presented. It can be used as a Shack-Hartmann sensor for hard X-rays (SHARX) for wavefront sensing and permits for true single-shot multi-contrast imaging the dynamics of materials with a spatial resolution in the micrometer range, sensitivity on nanosized structures and temporal resolution on the microsecond scale. The object's absorption and its induced wavefront shift can be assessed simultaneously together with information from diffraction channels. This enables the imaging of hierarchical materials. In contrast to the established Hartmann sensors the SHARX has an increased flux efficiency through focusing of the beam rather than blocking parts of it. We investigated the spatiotemporal behavior of a cavitation bubble induced by laser pulses. Furthermore, we validated the SHARX by measuring refraction angles of a single diamond CRL, where we obtained an angular resolution better than 4 microrad. △ Less

Submitted 27 February, 2018; originally announced February 2018.

Electronic band gaps of confined linear carbon chains ranging from polyyne to carbyne

Authors: Lei Shi, Philip Rohringer, Marius Wanko, Angel Rubio, Sören Waßerroth, Stephanie Reich, Sofie Cambré, Wim Wenseleers, Paola Ayala, Thomas Pichler

Abstract: Ultra long linear carbon chains of more than 6000 carbon atoms have recently been synthesized within double-walled carbon nanotubes, and they show a promising new route to one--atom--wide semiconductors with a direct band gap. Theoretical studies predicted that this band gap can be tuned by the length of the chains, the end groups, and their interactions with the environment. However, different de… ▽ More Ultra long linear carbon chains of more than 6000 carbon atoms have recently been synthesized within double-walled carbon nanotubes, and they show a promising new route to one--atom--wide semiconductors with a direct band gap. Theoretical studies predicted that this band gap can be tuned by the length of the chains, the end groups, and their interactions with the environment. However, different density functionals lead to very different values of the band gap of infinitely long carbyne. In this work, we applied resonant Raman excitation spectroscopy with more than 50 laser wavelengths to determine for the first time the band gap of long carbon chains encapsulated inside DWCNTs. The experimentally determined band gaps ranging from 2.253 to 1.848 eV follow a linear relation with Raman frequency. This lower bound is the smallest band gap of linear carbon chains observed so far. The comparison with experimental data obtained for short chains in gas phase or in solution demonstrates the effect of the DWCNT encapsulation, leading to an essential downshift of the band gap. This is explained by the interaction between the carbon chain and the host tube, which greatly modifies the chain's bond length alternation. △ Less

Submitted 12 December, 2017; v1 submitted 5 May, 2017; originally announced May 2017.

Comments: 7 pages, 5 figures

Journal ref: Phys. Rev. Materials 1, 075601 (2017)

Why GPS makes distances bigger than they are

Authors: Peter Ranacher, Richard Brunauer, Wolfgang Trutschnig, Stefan Christiaan Van der Spek, Siegfried Reich

Abstract: Global Navigation Satellite Systems (GNSS), such as the Global Positioning System (GPS), are among the most important sensors for movement analysis. GPS is widely used to record the trajectories of vehicles, animals and human beings. However, all GPS movement data are affected by both measurement and interpolation error. In this article we show that measurement error causes a systematic bias in di… ▽ More Global Navigation Satellite Systems (GNSS), such as the Global Positioning System (GPS), are among the most important sensors for movement analysis. GPS is widely used to record the trajectories of vehicles, animals and human beings. However, all GPS movement data are affected by both measurement and interpolation error. In this article we show that measurement error causes a systematic bias in distances recorded with a GPS: the distance between two points recorded with a GPS is -- on average -- bigger than the true distance between these points. This systematic `overestimation of distance' becomes relevant if the influence of interpolation error can be neglected, which is the case for movement sampled at high frequencies. We provide a mathematical explanation of this phenomenon and we illustrate that it functionally depends on the autocorrelation of GPS measurement error ($C$). We argue that $C$ can be interpreted as a quality measure for movement data recorded with a GPS. If there is strong autocorrelation any two consecutive position estimates have very similar error. This error cancels out when average speed, distance or direction are calculated along the trajectory. Based on our theoretical findings we introduce a novel approach to determine $C$ in real-world GPS movement data sampled at high frequencies. We apply our approach to a set of pedestrian and a set of car trajectories. We find that the measurement error in the data is strongly spatially and temporally autocorrelated and give a quality estimate of the data. Finally, we want to emphasize that all our findings are not limited to GPS alone. The systematic bias and all its implications are bound to occur in any movement data collected with absolute positioning if interpolation error can be neglected. △ Less

Submitted 14 July, 2015; v1 submitted 17 April, 2015; originally announced April 2015.

Comments: 17 pages, 8 figures, submitted to IJGIS

Quantum Nature of Plasmon-Enhanced Raman Scattering

Authors: Patryk Kusch, Sebastian Heeg, Christian Lehmann, Niclas S. Müller, Sören Wasserroth, Antonios Oikonomou, Nick Clark, Aravind Vijayaraghavan, Stephanie Reich

Abstract: We report plasmon-enhanced Raman scattering in graphene coupled to a single plasmonic hotspot measured as a function of laser energy. The enhancement profiles of the G peak show strong enhancement (up to $10^5$) and narrow resonances (30 meV) that are induced by the localized surface plasmon of a gold nanodimer. We observe the evolution of defect-mode scattering in a defect-free graphene lattice i… ▽ More We report plasmon-enhanced Raman scattering in graphene coupled to a single plasmonic hotspot measured as a function of laser energy. The enhancement profiles of the G peak show strong enhancement (up to $10^5$) and narrow resonances (30 meV) that are induced by the localized surface plasmon of a gold nanodimer. We observe the evolution of defect-mode scattering in a defect-free graphene lattice in resonance with the plasmon. We propose a quantum theory of plasmon-enhanced Raman scattering, where the plasmon forms an integral part of the excitation process. Quantum interferences between scattering channels explain the experimentally observed resonance profiles, in particular, the marked difference in enhancement factors for incoming and outgoing resonance and the appearance of the defect-type modes. △ Less

Submitted 7 May, 2015; v1 submitted 12 March, 2015; originally announced March 2015.

Comments: Keywords: plasmon-enhanced Raman scattering, SERS, graphene, quantum interferences, microscopic theory of Raman scattering. Content: 22 pages including 5 figures + 11 pages supporting information

A von Neumann Alternating Method for Finding Common Solutions to Variational Inequalities

Authors: Yair Censor, Aviv Gibali, Simeon Reich

Abstract: Modifying von Neumann's alternating projections algorithm, we obtain an alternating method for solving the recently introduced Common Solutions to Variational Inequalities Problem (CSVIP). For simplicity, we mainly confine our attention to the two-set CSVIP, which entails finding common solutions to two unrelated variational inequalities in Hilbert space. Modifying von Neumann's alternating projections algorithm, we obtain an alternating method for solving the recently introduced Common Solutions to Variational Inequalities Problem (CSVIP). For simplicity, we mainly confine our attention to the two-set CSVIP, which entails finding common solutions to two unrelated variational inequalities in Hilbert space. △ Less

Submitted 3 February, 2012; originally announced February 2012.

Comments: Nonlinear Analysis Series A: Theory, Methods & Applications, accepted for publication

Controlling overestimation of error covariance in ensemble Kalman filters with sparse observations: A variance limiting Kalman filter

Authors: Georg A. Gottwald, Lewis Mitchell, Sebastian Reich

Abstract: We consider the problem of an ensemble Kalman filter when only partial observations are available. In particular we consider the situation where the observational space consists of variables which are directly observable with known observational error, and of variables of which only their climatic variance and mean are given. To limit the variance of the latter poorly resolved variables we derive… ▽ More We consider the problem of an ensemble Kalman filter when only partial observations are available. In particular we consider the situation where the observational space consists of variables which are directly observable with known observational error, and of variables of which only their climatic variance and mean are given. To limit the variance of the latter poorly resolved variables we derive a variance limiting Kalman filter (VLKF) in a variational setting. We analyze the variance limiting Kalman filter for a simple linear toy model and determine its range of optimal performance. We explore the variance limiting Kalman filter in an ensemble transform setting for the Lorenz-96 system, and show that incorporating the information of the variance of some un-observable variables can improve the skill and also increase the stability of the data assimilation procedure. △ Less

Submitted 29 August, 2011; originally announced August 2011.

Comments: 32 pages, 11 figures

Journal ref: Monthly Weather Review, 139(8), pp. 2650-2667, 2011

Excitonic Rayleigh scattering spectra of metallic single-walled carbon nanotubes

Authors: Ermin Malic, Janina Maultzsch, Stephanie Reich, Andreas Knorr

Abstract: We have performed microscopic calculations of the Rayleigh scattering cross section for arbitrary metallic single-walled carbon nanotubes. The focus of our investigations lies on excitonic effects and their influence on the characteristic features in a Rayleigh scattering spectrum. Our approach is based on density matrix theory including tight-binding energies, the carrier-light coupling as well a… ▽ More We have performed microscopic calculations of the Rayleigh scattering cross section for arbitrary metallic single-walled carbon nanotubes. The focus of our investigations lies on excitonic effects and their influence on the characteristic features in a Rayleigh scattering spectrum. Our approach is based on density matrix theory including tight-binding energies, the carrier-light coupling as well as the carrier-carrier interaction. Due to the refractive index contribution to the scattering cross section, we observe characteristic features in Rayleigh spectra, such as a strong deviation from the Lorentz peak shape and the larger oscillator strength of the lower-lying transition $M_{ii}^-$ in the double-peaked structure, independently of the chiral angle and the diameter of the investigated nanotubes. We observe excitonic binding energies in the range of $\unit[60-80]{meV}$ for metallic nanotubes with diameters of $\unit[1.5-2.5]{nm}$. The overlap of the excitonic transition with the close-by continuum has a significant influence on the peak shape and a minor influence on the peak intensity ratios. The presented results are in good agreement with recent experimental data. △ Less

Submitted 11 August, 2010; originally announced August 2010.

Journal ref: Physical Review B 82, 115439 (2010)

The remapped particle-mesh advection scheme

Authors: Colin J. Cotter, Jason Frank, Sebastian Reich

Abstract: We describe the remapped particle-mesh method, a new mass-conserving method for solving the density equation which is suitable for combining with semi-Lagrangian methods for compressible flow applied to numerical weather prediction. In addition to the conservation property, the remapped particle-mesh method is computationally efficient and at least as accurate as current semi-Lagrangian methods… ▽ More We describe the remapped particle-mesh method, a new mass-conserving method for solving the density equation which is suitable for combining with semi-Lagrangian methods for compressible flow applied to numerical weather prediction. In addition to the conservation property, the remapped particle-mesh method is computationally efficient and at least as accurate as current semi-Lagrangian methods based on cubic interpolation. We provide results of tests of the method in the plane, results from incorporating the advection method into a semi-Lagrangian method for the rotating shallow-water equations in planar geometry, and results from extending the method to the surface of a sphere. △ Less

Submitted 26 July, 2006; originally announced July 2006.