Showing 1–14 of 14 results for author: Regan, B

Nanofabrication of high Q, transferable, diamond resonators

Authors: Blake Regan, Aleksandra Trycz, Johannes E. Fröch, Otto Cranwell Schaeper, Sejeong Kim, Igor Aharonovich

Abstract: Advancement of diamond based photonic circuitry requires robust fabrication protocols of key components, including diamond resonators and cavities. Here, we present 1D (nanobeam) photonic crystal cavities generated from single crystal diamond membranes utilising a metallic tungsten layer as a restraining, conductive and removable hard mask. The use of tungsten instead of a more conventional silico… ▽ More Advancement of diamond based photonic circuitry requires robust fabrication protocols of key components, including diamond resonators and cavities. Here, we present 1D (nanobeam) photonic crystal cavities generated from single crystal diamond membranes utilising a metallic tungsten layer as a restraining, conductive and removable hard mask. The use of tungsten instead of a more conventional silicon oxide layer enables good repeatability and reliability of the fabrication procedures. The process yields high quality diamond cavities with quality factors (Q factors) approaching 10$^$4. Finally, we show that the cavities can be picked up and transferred onto a trenched substrate to realise fully suspended diamond cavities. Our fabrication process demonstrates the capability of diamond membranes as modular components for broader diamond based quantum photonic circuitry. △ Less

Submitted 15 January, 2021; originally announced January 2021.

An Ahistorical Approach to Elementary Physics

Authors: B. C. Regan

Abstract: A goal of physics is to understand the greatest possible breadth of natural phenomena in terms of the most economical set of basic concepts. However, as the understanding of physics has developed historically, its pedagogy and language have not kept pace. This gap handicaps the student and the practitioner, making it harder to learn and apply ideas that are `well understood', and doubtless making… ▽ More A goal of physics is to understand the greatest possible breadth of natural phenomena in terms of the most economical set of basic concepts. However, as the understanding of physics has developed historically, its pedagogy and language have not kept pace. This gap handicaps the student and the practitioner, making it harder to learn and apply ideas that are `well understood', and doubtless making it more difficult to see past those ideas to new discoveries. Energy, momentum, and action are archaic concepts representing an unnecessary level of abstraction. Viewed from a modern perspective, these quantities correspond to wave parameters, namely temporal frequency, spatial frequency, and phase, respectively. The main results of classical mechanics can be concisely reproduced by considering waves in the spacetime defined by special relativity. This approach unifies kinematics and dynamics, and introduces inertial mass not via a definition, but rather as the real-space effect of a reciprocal-space invariant. △ Less

Submitted 6 September, 2020; originally announced October 2020.

Comments: 24 pages, 0 figures

Differential electron yield imaging with STXM

Authors: William A. Hubbard, Jared J. Lodico, Xin Yi Ling, Brian Zutter, Young-Sang Yu, David Shapiro, B. C. Regan

Abstract: Total electron yield (TEY) imaging is an established scanning transmission X-ray microscopy (STXM) technique that gives varying contrast based on a sample's geometry, elemental composition, and electrical conductivity. However, the TEY-STXM signal is determined solely by the electrons that the beam ejects from the sample. A related technique, X-ray beam-induced current (XBIC) imaging, is sensitive… ▽ More Total electron yield (TEY) imaging is an established scanning transmission X-ray microscopy (STXM) technique that gives varying contrast based on a sample's geometry, elemental composition, and electrical conductivity. However, the TEY-STXM signal is determined solely by the electrons that the beam ejects from the sample. A related technique, X-ray beam-induced current (XBIC) imaging, is sensitive to electrons and holes independently, but requires electric fields in the sample. Here we report that multi-electrode devices can be wired to produce differential electron yield (DEY) contrast, which is also independently sensitive to electrons and holes, but does not require an electric field. Depending on whether the region illuminated by the focused STXM beam is better connected to one electrode or another, the DEY-STXM contrast changes sign. DEY-STXM images thus provide a vivid map of a device's connectivity landscape, which can be key to understanding device function and failure. To demonstrate an application in the area of failure analysis, we image a 100~nm, lithographically-defined aluminum nanowire that has failed after being stressed with a large current density. △ Less

Submitted 27 September, 2020; originally announced September 2020.

Comments: 8 pages, 6 figures

Photonic devices fabricated from (111) oriented single crystal diamond

Authors: Blake Regan, Sejeong Kim, Anh Tu Huy Ly, Aleksandra Trycz, Kerem Bray, Kumaravelu Ganesan, Milos Toth, Igor Aharonovich

Abstract: Diamond is a material of choice in the pursuit of integrated quantum photonic technologies. So far, the majority of photonic devices fabricated from diamond, are made from (100)-oriented crystals. In this work, we demonstrate a methodology for the fabrication of optically-active membranes from (111)-oriented diamond. We use a liftoff technique to generate membranes, followed by chemical vapour dep… ▽ More Diamond is a material of choice in the pursuit of integrated quantum photonic technologies. So far, the majority of photonic devices fabricated from diamond, are made from (100)-oriented crystals. In this work, we demonstrate a methodology for the fabrication of optically-active membranes from (111)-oriented diamond. We use a liftoff technique to generate membranes, followed by chemical vapour deposition of diamond in the presence of silicon to generate homogenous silicon vacancy colour centers with emission properties that are superior to those in (100)-oriented diamond. We further use the diamond membranes to fabricate high quality microring resonators with quality factors exceeding ~ 3000. Supported by finite difference time domain calculations, we discuss the advantages of (111) oriented structures as building blocks for quantum nanophotonic devices. △ Less

Submitted 9 September, 2019; originally announced September 2019.

A Diamond-Photonics Platform Based on Silicon-Vacancy Centers in a Single Crystal Diamond Membrane and a Fiber-Cavity

Authors: Stefan Häußler, Julia Benedikter, Kerem Bray, Blake Regan, Andreas Dietrich, Jason Twamley, Igor Aharonovich, David Hunger, Alexander Kubanek

Abstract: We realize a potential platform for an efficient spin-photon interface, namely negatively-charged silicon-vacancy centers in a diamond membrane coupled to the mode of a fully-tunable, fiber-based, optical resonator. We demonstrate that introducing the thin ($\sim 200 \, \text{nm}$), single crystal diamond membrane into the mode of the resonator does not change the cavity properties, which is one o… ▽ More We realize a potential platform for an efficient spin-photon interface, namely negatively-charged silicon-vacancy centers in a diamond membrane coupled to the mode of a fully-tunable, fiber-based, optical resonator. We demonstrate that introducing the thin ($\sim 200 \, \text{nm}$), single crystal diamond membrane into the mode of the resonator does not change the cavity properties, which is one of the crucial points for an efficient spin-photon interface. In particular, we observe constantly high Finesse values of up to $3000$ and a linear dispersion in the presence of the membrane. We observe cavity-coupled fluorescence froman ensemble of SiV$^{-}$ centers with an enhancement factor of $\sim 1.9$. Furthermore from our investigations we extract the ensemble absorption and extrapolate an absorption cross section of $(2.9 \, \pm \, 2) \, \cdot \, 10^{-12} \, \text{cm}^{2}$ for a single SiV$^{-}$ center, much higher than previously reported. △ Less

Submitted 15 March, 2019; v1 submitted 6 December, 2018; originally announced December 2018.

Comments: 8 pages, 4 figures

Journal ref: Phys. Rev. B 99, 165310 (2019)

Anti-Stokes excitation of solid-state quantum emitters for nanoscale thermometry

Authors: Toan Trong Tran, Blake Regan, Evgeny A. Ekimov, Zhao Mu, Zhou Yu, Weibo Gao, Prineha Narang, Alexander S. Solntsev, Milos Toth, Igor Aharonovich, Carlo Bradac

Abstract: Color centers in solids are the fundamental constituents of a plethora of applications such as lasers, light emitting diodes and sensors, as well as the foundation of advanced quantum information and communication technologies. Their photoluminescence properties are usually studied under Stokes excitation, in which the emitted photons are at a lower energy than the excitation ones. In this work, w… ▽ More Color centers in solids are the fundamental constituents of a plethora of applications such as lasers, light emitting diodes and sensors, as well as the foundation of advanced quantum information and communication technologies. Their photoluminescence properties are usually studied under Stokes excitation, in which the emitted photons are at a lower energy than the excitation ones. In this work, we explore the opposite Anti-Stokes process, where excitation is performed with lower energy photons. We report that the process is sufficiently efficient to excite even a single quantum system, namely the germanium-vacancy center in diamond. Consequently, we leverage the temperature-dependent, phonon-assisted mechanism to realize an all-optical nanoscale thermometry scheme that outperforms any homologous optical method employed to date. Our results frame a promising approach for exploring fundamental light-matter interactions in isolated quantum systems, and harness it towards the realization of practical nanoscale thermometry and sensing. △ Less

Submitted 11 October, 2018; originally announced October 2018.

A random laser based on diamond nanoneedles

Authors: Ngoc My Hanh Duong, Blake Regan, Milos Toth, Igor Aharonovich, Judith M Dawes

Abstract: Random lasers use radiative gain and multiple scatterers in disordered media to generate light amplification. In this study, we demonstrate a random laser based on diamond nanoneedles that act as scatterers in combination with fluorescent dye molecules that serve as a gain medium. Random lasers realized using diamond possess high spectral radiance with angle-free emission and thresholds of 0.16 mJ… ▽ More Random lasers use radiative gain and multiple scatterers in disordered media to generate light amplification. In this study, we demonstrate a random laser based on diamond nanoneedles that act as scatterers in combination with fluorescent dye molecules that serve as a gain medium. Random lasers realized using diamond possess high spectral radiance with angle-free emission and thresholds of 0.16 mJ. The emission dependence on the pillar diameter and density is investigated, and optimum lasing conditions are measured for pillars with spacing and density of 336 nm and ~ 2.9x10^10 cm-2. Our results expand the application space of diamond as a material platform for practical, compact photonic devices and sensing applications. △ Less

Submitted 30 August, 2018; originally announced August 2018.

Bottom up engineering of near-identical quantum emitters in atomically thin materials

Authors: Noah Mendelson, Zai-Quan Xu, Toan Trong Tran, Mehran Kianinia, Carlo Bradac, John Scott, Minh Nguyen, James Bishop, Johannes Froch, Blake Regan, Igor Aharonovich, Milos Toth

Abstract: Quantum technologies require robust and photostable single photon emitters (SPEs) that can be reliably engineered. Hexagonal boron nitride (hBN) has recently emerged as a promising candidate host to bright and optically stable SPEs operating at room temperature. However, the emission wavelength of the fluorescent defects in hBN has, to date, been shown to be uncontrolled. The emitters usually disp… ▽ More Quantum technologies require robust and photostable single photon emitters (SPEs) that can be reliably engineered. Hexagonal boron nitride (hBN) has recently emerged as a promising candidate host to bright and optically stable SPEs operating at room temperature. However, the emission wavelength of the fluorescent defects in hBN has, to date, been shown to be uncontrolled. The emitters usually display a large spread of zero phonon line (ZPL) energies spanning over a broad spectral range (hundreds of nanometers), which hinders the potential development of hBN-based devices and applications. We demonstrate bottom-up, chemical vapor deposition growth of large-area, few layer hBN that hosts large quantities of SPEs: 100 per 10x10 μm2. Remarkably, more than 85 percent of the emitters have a ZPL at (580{\pm}10)nm, a distribution which is over an order of magnitude narrower than previously reported. Exploiting the high density and uniformity of the emitters, we demonstrate electrical modulation and tuning of the ZPL emission wavelength by up to 15 nm. Our results constitute a definite advancement towards the practical deployment of hBN single photon emitters in scalable quantum photonic and hybrid optoelectronic devices based on 2D materials. △ Less

Submitted 4 June, 2018; originally announced June 2018.

Single crystal diamond membranes containing germanium vacancy color centers

Authors: Kerem Bray, Blake Regan, Aleksandra Trycz, Rodolfo Previdi, Gediminas Seniutinas, Kumaravelu Ganesan, Mehran Kianinia, Sejeong Kim, Igor Aharonovich

Abstract: Single crystal diamond membranes that host optically active emitters are highly attractive components for integrated quantum nanophotonics. In this work we demonstrate bottom-up synthesis of single crystal diamond membranes containing the germanium vacancy (GeV) color centers. We employ a lift-off technique to generate the membranes and perform chemical vapour deposition in a presence of germanium… ▽ More Single crystal diamond membranes that host optically active emitters are highly attractive components for integrated quantum nanophotonics. In this work we demonstrate bottom-up synthesis of single crystal diamond membranes containing the germanium vacancy (GeV) color centers. We employ a lift-off technique to generate the membranes and perform chemical vapour deposition in a presence of germanium oxide to realize the insitu do**. Finally, we show that these membranes are suitable for engineering of photonic resonators such as microring cavities with quality factors of 1500. The robust and scalable approach to engineer single crystal diamond membranes containing emerging color centers is a promising pathway for realization of diamond integrated quantum nanophotonic circuits on a chip. △ Less

Submitted 6 April, 2018; originally announced April 2018.

In situ coherent diffractive imaging

Authors: Yuan Hung Lo, Lingrong Zhao, Marcus Gallagher-Jones, Arjun Rana, Jared Lodico, Weikun Xiao, B. C. Regan, Jianwei Miao

Abstract: Coherent diffractive imaging (CDI) has been widely applied in the physical and biological sciences using synchrotron radiation, XFELs, high harmonic generation, electrons and optical lasers. One of CDI's important applications is to probe dynamic phenomena with high spatio-temporal resolution. Here, we report the development of a general in situ CDI method for real-time imaging of dynamic processe… ▽ More Coherent diffractive imaging (CDI) has been widely applied in the physical and biological sciences using synchrotron radiation, XFELs, high harmonic generation, electrons and optical lasers. One of CDI's important applications is to probe dynamic phenomena with high spatio-temporal resolution. Here, we report the development of a general in situ CDI method for real-time imaging of dynamic processes in solution. By introducing a time-invariant overlap** region as a real-space constraint, we show that in situ CDI can simultaneously reconstruct a time series of the complex exit wave of dynamic processes with robust and fast convergence. We validate this method using numerical simulations with coherent X-rays and performing experiments on a materials science and a biological specimen in solution with an optical laser. Our numerical simulations further indicate that in situ CDI can potentially reduce the radiation dose by more than an order of magnitude relative to conventional CDI. As coherent X-rays are under rapid development worldwide, we expect in situ CDI could be applied to probe dynamic phenomena ranging from electrochemistry, structural phase transitions, charge transfer, transport, crystal nucleation, melting and fluid dynamics to biological imaging. △ Less

Submitted 2 December, 2017; v1 submitted 19 March, 2017; originally announced March 2017.

Comments: 19 pages, 5 figures

Robust Solid State Quantum System Operating at 800 K

Authors: Mehran Kianinia, Sherif Abdulkader Tawfik, Blake Regan, Toan Trong Tran, Michael J. Ford, Igor Aharonovich, Milos Toth

Abstract: Realization of Quantum information and communications technologies requires robust, stable solid state single photon sources. However, most existing sources cease to function above cryogenic or room temperature due to thermal ionization or strong phonon coupling which impede their emissive and quantum properties. Here we present an efficient single photon source based on a defect in a van der Waal… ▽ More Realization of Quantum information and communications technologies requires robust, stable solid state single photon sources. However, most existing sources cease to function above cryogenic or room temperature due to thermal ionization or strong phonon coupling which impede their emissive and quantum properties. Here we present an efficient single photon source based on a defect in a van der Waals crystal that is optically stable and operates at elevated temperatures of up to 800 K. The quantum nature of the source and the photon purity are maintained upon heating to 800 K and cooling back to room temperature. Our report of a robust high temperature solid state single photon source constitutes a significant step to-wards practical, integrated quantum technologies for real-world environments. △ Less

Submitted 9 November, 2016; originally announced November 2016.

Comments: 9 pages

Impedance matching of inverted conductors: Two-dimensional beam splitters with divergent gain

Authors: Matthew Mecklenburg, B. C. Regan

Abstract: A thin conducting sheet - graphene, for example - transmits, absorbs, and reflects radiation. A sheet that is very thin, even vanishingly so, can still produce 50% absorption at normal incidence if it has conductivity corresponding to half the impedance of free space. We find that, regardless of the sheet conductivity, there exists a combination of polarization and angle of incidence that achieves… ▽ More A thin conducting sheet - graphene, for example - transmits, absorbs, and reflects radiation. A sheet that is very thin, even vanishingly so, can still produce 50% absorption at normal incidence if it has conductivity corresponding to half the impedance of free space. We find that, regardless of the sheet conductivity, there exists a combination of polarization and angle of incidence that achieves this impedance half-matching condition. If the conducting medium can be inverted, the conductivity is formally negative and the sheet amplifies the incident radiation. To the extent that a negative half-match in a thin sheet can be maintained, enormous single-pass gain in both transmission and reflection is possible. Known semiconductors (e.g., gallium nitride) have the optical properties necessary to give large amplification in a structure that is, remarkably, both thin and nonresonant. △ Less

Submitted 9 March, 2017; v1 submitted 11 March, 2015; originally announced March 2015.

Comments: 6 pages, 2 figures. Updated to final PRA format with two additional references (1934 Woltersdorff and 1964 Kaplan)

Journal ref: Phys. Rev. A 92, 053856 (2015)

Reply to "Local Filtering Fundamentally Against Wide Spectrum"

Authors: Jianwei Miao, M. C. Scott, Chien-Chun Chen, Chun Zhu, Edward R. White, Chin-Yi Chiu, B. C. Regan, Yu Huang, Laurence D. Marks

Abstract: After carefully studying the comment by Wang et al. (arXiv:1408.6420), we found it includes several mistakes and unjustified statements and Wang et al. lack very basic knowledge of dislocations. Moreover, there is clear evidence indicating that Wang et al. significantly misrepresented our method and claimed something that they actually did not implement. After carefully studying the comment by Wang et al. (arXiv:1408.6420), we found it includes several mistakes and unjustified statements and Wang et al. lack very basic knowledge of dislocations. Moreover, there is clear evidence indicating that Wang et al. significantly misrepresented our method and claimed something that they actually did not implement. △ Less

Submitted 2 September, 2014; originally announced September 2014.

Comments: 2 pages, 9 references

Electron tomography at 2.4 Å resolution

Authors: M. C. Scott, Chien-Chun Chen, Matthew Mecklenburg, Chun Zhu, Rui Xu, Peter Ercius, Ulrich Dahmen, B. C. Regan, Jianwei Miao

Abstract: Transmission electron microscopy (TEM) is a powerful imaging tool that has found broad application in materials science, nanoscience and biology(1-3). With the introduction of aberration-corrected electron lenses, both the spatial resolution and image quality in TEM have been significantly improved(4,5) and resolution below 0.5 Å has been demonstrated(6). To reveal the 3D structure of thin samples… ▽ More Transmission electron microscopy (TEM) is a powerful imaging tool that has found broad application in materials science, nanoscience and biology(1-3). With the introduction of aberration-corrected electron lenses, both the spatial resolution and image quality in TEM have been significantly improved(4,5) and resolution below 0.5 Å has been demonstrated(6). To reveal the 3D structure of thin samples, electron tomography is the method of choice(7-11), with resolutions of ~1 nm^3 currently achievable(10,11). Recently, discrete tomography has been used to generate a 3D atomic reconstruction of a silver nanoparticle 2-3 nm in diameter(12), but this statistical method assumes prior knowledge of the particle's lattice structure and requires that the atoms fit rigidly on that lattice. Here we report the experimental demonstration of a general electron tomography method that achieves atomic scale resolution without initial assumptions about the sample structure. By combining a novel projection alignment and tomographic reconstruction method with scanning transmission electron microscopy, we have determined the 3D structure of a ~10 nm gold nanoparticle at 2.4 Å resolution. While we cannot definitively locate all of the atoms inside the nanoparticle, individual atoms are observed in some regions of the particle and several grains are identified at three dimensions. The 3D surface morphology and internal lattice structure revealed are consistent with a distorted icosahedral multiply-twinned particle. We anticipate that this general method can be applied not only to determine the 3D structure of nanomaterials at atomic scale resolution(13-15), but also to improve the spatial resolution and image quality in other tomography fields(7,9,16-20). △ Less

Submitted 5 February, 2012; v1 submitted 26 August, 2011; originally announced August 2011.

Comments: 27 pages, 17 figures

Journal ref: Nature, 483, 444-447 (2012)