Showing 1–30 of 30 results for author: Ramirez, J

Tunable Surface Plasmon-Polaritons Interaction in All-Metal Pyramidal Metasurfaces: Unveiling Principles and Significance for Biosensing Applications

Authors: Talles E. M. Marques, Yuri H. Isayama, Felipe M. F. Teixeira, Fabiano C. Santana, Rafael S. Gonçalves, Aline Rocha, Bruna P. Dias, Lidia M. Andrade, Estefânia M. N. Martins, Ronaldo A. P. Nagem, Clascidia A. Furtado, Miguel A. G. Balanta, Jorge Ricardo Mejía-Salazar, Paulo S. S. Guimarães, Wagner N. Rodrigues, Jhonattan C. Ramirez

Abstract: The strong coupling of plasmonic resonance modes in conductive pyramidal nanoparticles leads to an increase in the density of free charges on the surface. By ensuring plasmonic coupling in the pyramidal nanoparticle lattice, the achieved field intensity is potentiated. At the same time, a strong coupling between resonant modes is guaranteed, which results in the formation of new hybrid modes. In t… ▽ More The strong coupling of plasmonic resonance modes in conductive pyramidal nanoparticles leads to an increase in the density of free charges on the surface. By ensuring plasmonic coupling in the pyramidal nanoparticle lattice, the achieved field intensity is potentiated. At the same time, a strong coupling between resonant modes is guaranteed, which results in the formation of new hybrid modes. In this manuscript, we demonstrated a tunable double anticrossing interaction that results from the interaction between two Localized Surface Plasmon Resonance (LSPR) modes and a Surface Plasmon Polariton (SPP) wave. The tuning is done as a function of the variation of the angle of incidence of the input electric field. From the double anticrossing, an increase in field intensity in a blue-shifted LSPR mode located in the red wavelength region is observed. This demonstrates that at certain angles of incidence, the intensity field obtained is strongly favored, which would be beneficial for applications such as Surface Enhancement Raman Spectroscopy (SERS). Nanoparticle-based lattices have been widely used for biosensor applications. However, one of the major limitations of this type of device is the low tolerance to high concentrations of biomolecules, which significantly affects their performance. According to the studies carried out for this manuscript, it was demonstrated that the implemented geometry allows for the observation of an LSPR mode, which is responsible for the control and synchronization of other perceived resonances. This mode remains almost invariant when subjected to structural variations or changes in the angle of incidence of the electric field. These characteristics eliminate the limitation mentioned above, allowing for sensitivities 10^3 times higher than those achieved in conventional systems based on LSPR used to detect P. brasiliensis antigen. △ Less

Submitted 20 May, 2024; originally announced May 2024.

Comments: 21 pages, 3 figures

Photon Counting Interferometry to Detect Geontropic Space-Time Fluctuations with GQuEST

Authors: Sander M. Vermeulen, Torrey Cullen, Daniel Grass, Ian A. O. MacMillan, Alexander J. Ramirez, Jeffrey Wack, Boris Korzh, Vincent S. H. Lee, Kathryn M. Zurek, Chris Stoughton, Lee McCuller

Abstract: The GQuEST (Gravity from the Quantum Entanglement of Space-Time) experiment uses tabletop-scale Michelson laser interferometers to probe for fluctuations in space-time. We present an interferometer design featuring a novel photon counting readout method that provides unprecedented sensitivity, as it is not subject to the interferometric standard quantum limit. We evaluate the potential of this des… ▽ More The GQuEST (Gravity from the Quantum Entanglement of Space-Time) experiment uses tabletop-scale Michelson laser interferometers to probe for fluctuations in space-time. We present an interferometer design featuring a novel photon counting readout method that provides unprecedented sensitivity, as it is not subject to the interferometric standard quantum limit. We evaluate the potential of this design to measure space-time fluctuations motivated by recent `geontropic' quantum gravity models. The accelerated accrual of statistical power offered by the photon counting readout enables GQuEST to detect the predicted quantum gravity phenomena within measurement times at least 100 times shorter than equivalent conventional interferometers. The GQuEST design thus enables a fast and sensitive search for signatures of quantum gravity in a laboratory-scale experiment. △ Less

Submitted 11 April, 2024; originally announced April 2024.

Single-Chip Silicon Photonic Processor for Analog Optical and Microwave Signals

Authors: Hong Deng, **g Zhang, Emadreza Soltanian, Xiangfeng Chen, Chao Pang, Nicolas Vaissiere, Delphine Neel, Joan Ramirez, Jean Decobert, Nishant Singh, Guy Torfs, Gunther Roelkens, Wim Bogaerts

Abstract: The explosion of data volume in communications, AI training, and cloud computing requires efficient data handling, which is typically stored as digital electrical information and transmitted as wireless radio frequency (RF) signals or light waves in optical fibres. Today's communications systems mostly treat the RF and optical signals separately, which results in unnecessary conversion losses and… ▽ More The explosion of data volume in communications, AI training, and cloud computing requires efficient data handling, which is typically stored as digital electrical information and transmitted as wireless radio frequency (RF) signals or light waves in optical fibres. Today's communications systems mostly treat the RF and optical signals separately, which results in unnecessary conversion losses and increased cost. In this work, we report the first fully on-chip signal processor for high-speed RF and optical signals based on a silicon photonic circuit. Our chip is capable of both generation and detection of analog electrical and optical signals, and can program a user-defined filter response in both domains. The single silicon photonic chip integrates all essential components like modulators, optical filters, and photodetectors, as well as tunable lasers enabled by transfer-printed Indium Phosphide (InP) optical amplifiers. The system's configuration is locally programmed through thermo-optic phase shifters and monitored by photodetectors. We demonstrate our chip's capabilities with different combinations of RF and optical signal processing functions, including optical and RF signal generation and filtering. This represents a key step towards compact microwave photonic systems for future wireless communication and sensing applications. △ Less

Submitted 14 November, 2023; originally announced November 2023.

Probabilistic Measures for Biological Adaptation and Resilience

Authors: Jorge M. Ramirez, Juan M. Restrepo, Valerio Lucarini, David Weston

Abstract: This paper introduces a novel approach to quantifying ecological resilience in biological systems, particularly focusing on noisy systems responding to episodic disturbances with sudden adaptations. Incorporating concepts from non-equilibrium statistical mechanics, we propose a measure termed `ecological resilience through adaptation,' specifically tailored to noisy, forced systems that undergo ph… ▽ More This paper introduces a novel approach to quantifying ecological resilience in biological systems, particularly focusing on noisy systems responding to episodic disturbances with sudden adaptations. Incorporating concepts from non-equilibrium statistical mechanics, we propose a measure termed `ecological resilience through adaptation,' specifically tailored to noisy, forced systems that undergo physiological adaptation in the face of stressful environmental changes. Randomness plays a key role, accounting for model uncertainty and the inherent variability in the dynamical response among components of biological systems. Our measure of resilience is rooted in the probabilistic description of states within these systems, and is defined in terms of the dynamics of the ensemble average of a model-specific observable quantifying success or well-being. Our approach utilizes stochastic linear response theory to compute how the expected success of a system, originally in statistical equilibrium, dynamically changes in response to a environmental perturbation and a subsequent adaptation. The resulting mathematical derivations allow for the estimation of resilience in terms of ensemble averages of simulated or experimental data. Finally, through a simple but clear conceptual example, we illustrate how our resilience measure can be interpreted and compared to other existing frameworks in the literature. The methodology is general but inspired by applications in plant systems, with the potential for broader application to complex biological processes. △ Less

Submitted 12 December, 2023; v1 submitted 13 July, 2023; originally announced July 2023.

Nowcasting Temporal Trends Using Indirect Surveys

Authors: Ajitesh Srivastava, Juan Marcos Ramírez, Sergio Díaz-Aranda, Jose Aguilar, Antonio Ortega, Antonio Fernández Anta, Rosa Elvira Lillo

Abstract: Indirect surveys, in which respondents provide information about other people they know, have been proposed for estimating (nowcasting) the size of a \emph{hidden population} where privacy is important or the hidden population is hard to reach. Examples include estimating casualties in an earthquake, conditions among female sex workers, and the prevalence of drug use and infectious diseases. The N… ▽ More Indirect surveys, in which respondents provide information about other people they know, have been proposed for estimating (nowcasting) the size of a \emph{hidden population} where privacy is important or the hidden population is hard to reach. Examples include estimating casualties in an earthquake, conditions among female sex workers, and the prevalence of drug use and infectious diseases. The Network Scale-up Method (NSUM) is the classical approach to develo** estimates from indirect surveys, but it was designed for one-shot surveys. Further, it requires certain assumptions and asking for or estimating the number of individuals in each respondent's network. In recent years, surveys have been increasingly deployed online and can collect data continuously (e.g., COVID-19 surveys on Facebook during much of the pandemic). Conventional NSUM can be applied to these scenarios by analyzing the data independently at each point in time, but this misses the opportunity of leveraging the temporal dimension. We propose to use the responses from indirect surveys collected over time and develop analytical tools (i) to prove that indirect surveys can provide better estimates for the trends of the hidden population over time, as compared to direct surveys and (ii) to identify appropriate temporal aggregations to improve the estimates. We demonstrate through extensive simulations that our approach outperforms traditional NSUM and direct surveying methods. We also empirically demonstrate the superiority of our approach on a real indirect survey dataset of COVID-19 cases. △ Less

Submitted 14 December, 2023; v1 submitted 13 July, 2023; originally announced July 2023.

Comments: Accepted at AAAI 2024

ACM Class: G.3

Machine learning opens a doorway for microrheology with optical tweezers in living systems

Authors: Matthew G. Smith, Jack Radford, Eky Febrianto, Jorge Ramírez, Helen O'Mahony, Andrew B. Matheson, Graham M. Gibson, Daniele Faccio, Manlio Tassieri

Abstract: It has been argued [Tassieri, \textit{Soft Matter}, 2015, \textbf{11}, 5792] that linear microrheology with optical tweezers (MOT) of living systems ``\textit{is not an option}'', because of the wide gap between the observation time required to collect statistically valid data and the mutational times of the organisms under study. Here, we have taken a first step towards a possible solution of thi… ▽ More It has been argued [Tassieri, \textit{Soft Matter}, 2015, \textbf{11}, 5792] that linear microrheology with optical tweezers (MOT) of living systems ``\textit{is not an option}'', because of the wide gap between the observation time required to collect statistically valid data and the mutational times of the organisms under study. Here, we have taken a first step towards a possible solution of this problem by exploiting modern machine learning (ML) methods to reduce the duration of MOT measurements from several tens of minutes down to one second. This has been achieved by focusing on the analysis of computer simulated trajectories of an optically trapped particle suspended in a set of Newtonian fluids having viscosity values spanning three orders of magnitude, i.e. from $10^{-3}$ to $1$ Pa$\cdot$s. When the particle trajectory is analysed by means of conventional statistical mechanics principles, we explicate for the first time in literature the relationship between the required duration of MOT experiments ($T_m$) and the fluids relative viscosity ($η_r$) to achieve an uncertainty as low as $1\%$; i.e., $T_m\cong 17η_r^3$ minutes. This has led to further evidences explaining why conventional MOT measurements commonly underestimate the materials' viscoelastic properties, especially in the case of high viscous fluids or soft-solids such as gels and cells. Finally, we have developed a ML algorithm to determine the viscosity of Newtonian fluids that uses feature extraction on raw trajectories acquired at a kHz and for a duration of only one second, yet capable of returning viscosity values carrying an error as low as $\sim0.3\%$ at best; hence the opening of a doorway for MOT in living systems. △ Less

Submitted 17 November, 2022; originally announced November 2022.

Adiabatic lapse rate of real gases

Authors: Bogar Díaz, Miguel Ángel García Ariza, J. E. Ramírez

Abstract: We derive a formula for the dry adiabatic lapse rate of atmospheres composed of real gases. We restrict our study to those described by a family of two-parameter cubic equations of state and the recent Guevara non-cubic equation. Since our formula depends on the adiabatic curves, we compute them all at once, considering molecules that can move, rotate, and vibrate, for any equation of state. To il… ▽ More We derive a formula for the dry adiabatic lapse rate of atmospheres composed of real gases. We restrict our study to those described by a family of two-parameter cubic equations of state and the recent Guevara non-cubic equation. Since our formula depends on the adiabatic curves, we compute them all at once, considering molecules that can move, rotate, and vibrate, for any equation of state. To illustrate our results, we estimate the lapse rate of the troposphere of Titan, obtaining a better approximation to the observed data in some instances, when compared to the estimation provided by the virial expansion up to third order. △ Less

Submitted 19 July, 2022; v1 submitted 22 March, 2022; originally announced March 2022.

Comments: 8 pages

Journal ref: Physical Review E 106 (2022) 014108

The Double Chooz antineutrino detectors

Authors: Double Chooz Collaboration, H. de Kerret, Y. Abe, C. Aberle, T. Abrahão, J. M. Ahijado, T. Akiri, J. M. Alarcón, J. Alba, H. Almazan, J. C. dos Anjos, S. Appel, F. Ardellier, I. Barabanov, J. C. Barriere, E. Baussan, A. Baxter, I. Bekman, M. Bergevin, A. Bernstein, W. Bertoli, T. J. C. Bezerra, L. Bezrukov, C. Blanco, N. Bleurvacq , et al. (226 additional authors not shown)

Abstract: This article describes the setup and performance of the near and far detectors in the Double Chooz experiment. The electron antineutrinos of the Chooz nuclear power plant were measured in two identically designed detectors with different average baselines of about 400 m and 1050 m from the two reactor cores. Over many years of data taking the neutrino signals were extracted from interactions in th… ▽ More This article describes the setup and performance of the near and far detectors in the Double Chooz experiment. The electron antineutrinos of the Chooz nuclear power plant were measured in two identically designed detectors with different average baselines of about 400 m and 1050 m from the two reactor cores. Over many years of data taking the neutrino signals were extracted from interactions in the detectors with the goal of measuring a fundamental parameter in the context of neutrino oscillation, the mixing angle θ13. The central part of the Double Chooz detectors was a main detector comprising four cylindrical volumes filled with organic liquids. From the inside towards the outside there were volumes containing gadolinium-loaded scintillator, gadolinium-free scintillator, a buffer oil and, optically separated, another liquid scintillator acting as veto system. Above this main detector an additional outer veto system using plastic scintillator strips was installed. The technologies developed in Double Chooz were inspiration for several other antineutrino detectors in the field. The detector design allowed implementation of efficient background rejection techniques including use of pulse shape information provided by the data acquisition system. The Double Chooz detectors featured remarkable stability, in particular for the detected photons, as well as high radiopurity of the detector components. △ Less

Submitted 13 September, 2022; v1 submitted 31 January, 2022; originally announced January 2022.

Comments: 49 pages, 29 figures

Journal ref: Eur.Phys.J. C (2022) 82:804

Stress-tailoring magnetic anisotropy of V$_2$O$_3$/Ni bilayers

Authors: Christian T. Wolowiec, Juan Gabriel Ramírez, Min-Han Lee, Nicolas M. Vargas, Ali C. Basaran, Pavel Salev, Ivan K. Schuller

Abstract: We report on a temperature-driven reversible change of the in-plane magnetic anisotropy of V$_2$O$_3$/Ni bilayers. This is caused by the rhombohedral to monoclinic structural phase transition of V$_2$O$_3$ at $T_C$ = 160 K. The in-plane magnetic anisotropy is uniaxial above $T_C$, but as the bilayer is cooled through the structural phase transition, a secondary magnetic easy axis emerges. Ferromag… ▽ More We report on a temperature-driven reversible change of the in-plane magnetic anisotropy of V$_2$O$_3$/Ni bilayers. This is caused by the rhombohedral to monoclinic structural phase transition of V$_2$O$_3$ at $T_C$ = 160 K. The in-plane magnetic anisotropy is uniaxial above $T_C$, but as the bilayer is cooled through the structural phase transition, a secondary magnetic easy axis emerges. Ferromagnetic resonance measurements show that this change in magnetic anisotropy is reversible with temperature. We identify two structural properties of the V$_2$O$_3$/Ni bilayers affecting the in-plane magnetic anisotropy: (1) a growth-induced uniaxial magnetic anisotropy associated with step-like terraces in the bilayer microstructure and (2) a low-temperature strain-induced biaxial anisotropy associated with the V$_2$O$_3$ structural phase transition. Magnetoresistance measurements corroborate the change in magnetic anisotropy across the structural transition and suggest that the negative magnetostriction of Ni leads to the emergence of a strain-induced easy-axis. This shows that a temperature-dependent structural transition in V$_2$O$_3$ may be used to tune the magnetic anisotropy in an adjacent ferromagnetic thin film. △ Less

Submitted 23 December, 2021; originally announced December 2021.

Comments: 9 pages, 8 figures

Journal ref: Phys. Rev. Materials 6, 064408 (2022)

Mobility strategies based on percolation theory to avoid the spread of diseases: COVID-19

Authors: Diana Rosales Herrera, J. E. Ramírez, Jorge Velázquez-Castro, Bogar Díaz, M. I. Martínez, P. Vázquez Juárez, A. Fernández Téllez

Abstract: Human mobility is an important factor in the propagation of infectious diseases. In particular, the spatial spread of a disease is a consequence of human mobility. On the other hand, the control strategies based on mobility restrictions are generally unpopular and costly. These high social and economic costs make it very important to design global protocols where the cost is minimized and effect… ▽ More Human mobility is an important factor in the propagation of infectious diseases. In particular, the spatial spread of a disease is a consequence of human mobility. On the other hand, the control strategies based on mobility restrictions are generally unpopular and costly. These high social and economic costs make it very important to design global protocols where the cost is minimized and effects maximized. In this work, we calculate the percolation threshold of the spread in a network of a disease. In particular, we found the number of roads to close and regions to isolate in the Puebla State, Mexico, to avoid the global spread of COVID-19. Computational simulations taking into account the proposed strategy show a potential reduction of 94% of infections. This methodology can be used in broader and different areas to help in the design of health policies. -- La movilidad de las personas es uno de los principales factores que propician la propagación de epidemias. En particular, es el factor que genera el esparcimiento de la enfermedad en diferentes regiones. Las medidas de control epidemiológico basadas en la restricción de movilidad son generalmente poco populares y las consecuencias económicas pueden llegar a ser muy grandes. Debido a los altos costos de estas medidas, es de gran relevancia tener estrategias globales que optimicen las medidas minimizando los costos. En este trabajo, se calcula el umbral de percolación de la propagación de enfermedades en redes. De manera particular, se encuentra el número de caminos a restringir y localidades que tienen que ser aisladas para limitar la propagación global de COVID-19 en el Estado de Puebla, México. Simulaciones computacionales donde se implementan las medidas de restricción de movilidad entre los diferentes municipios, junto con las medidas de confinamiento, muestran que es posible reducir un 94% de la población afectada comparado con el caso en el que no se implementa ninguna medida. Esta metodología puede ser aplicada a distintas zonas para ayudar a las autoridades de salud en la toma de decisiones. △ Less

Submitted 23 May, 2021; originally announced May 2021.

Comments: 15 pages, 8 Figures, in spanish to an easy diffusion between society and government dependences of México

Journal ref: Revista Mexicana de Física 68 011701 1-12 2022

Interacting color strings as the origin of the liquid behavior of the quark-gluon plasma

Authors: J. E. Ramírez, Bogar Díaz, C. Pajares

Abstract: We study the radial distribution function of the color sources (strings) formed in hadronic collisions and the requirements to obtain a liquid. As a repulsive interaction is needed, we incorporate a concentric core in the strings as well as the probability that a string allows core-core overlaps. We find systems where the difference between the gas-liquid and confined-deconfined phase transition t… ▽ More We study the radial distribution function of the color sources (strings) formed in hadronic collisions and the requirements to obtain a liquid. As a repulsive interaction is needed, we incorporate a concentric core in the strings as well as the probability that a string allows core-core overlaps. We find systems where the difference between the gas-liquid and confined-deconfined phase transition temperatures is small. This explains the experimentally observed liquid behavior of the quark-gluon plasma above the confined-deconfined transition temperature. △ Less

Submitted 19 May, 2023; v1 submitted 14 December, 2020; originally announced December 2020.

Comments: 7 pages, 4 figures, It matches the published version-typos corrected

Journal ref: Phys. Rev. D 103, 094029 (2021)

Adiabatic lapse rate of non-ideal gases: The role of molecular interactions and vibrations

Authors: Bogar Díaz, J. E. Ramírez

Abstract: We report a formula for the dry adiabatic lapse rate that depends on the compressibility factor and the adiabatic curves. Then, to take into account the non-ideal behavior of the gases, we consider molecules that can move, rotate, and vibrate and the information of molecular interactions through the virial coefficients. We deduce the compressibility factor in its virial expansion form and the adia… ▽ More We report a formula for the dry adiabatic lapse rate that depends on the compressibility factor and the adiabatic curves. Then, to take into account the non-ideal behavior of the gases, we consider molecules that can move, rotate, and vibrate and the information of molecular interactions through the virial coefficients. We deduce the compressibility factor in its virial expansion form and the adiabatic curves within the virial expansion up to any order. With this information and to illustrate the mentioned formula, we write the lapse rate for the ideal gas, and the virial expansion up to the second and third coefficient cases. To figure out the role of the virial coefficients and vibrations, under different atmospheric conditions, we calculate the lapse rate for Earth, Mars, Venus, Titan, and the exoplanet Gl 581d. Furthermore, for each one we consider three models in the virial expansion: van der Waals, square-well, and hard-sphere. Also, when possible, we compare our results to the experimental data. Finally, we remark that for Venus and Titan, which are under extreme conditions of pressure or temperature, our calculations are in good agreement with the observed values, in some instances. △ Less

Submitted 27 December, 2020; v1 submitted 27 July, 2020; originally announced July 2020.

Comments: 11 pages, 9 figures

Journal ref: Phys. Rev. E 102, 042107 (2020)

Ultrafast 1 MHz vacuum-ultraviolet source via highly cascaded harmonic generation in negative-curvature hollow-core fibers

Authors: David E. Couch, Daniel D. Hickstein, David G. Winters, Sterling J. Backus, Matthew S. Kirchner, Scott R. Domingue, Jessica J. Ramirez, Charles G. Durfee, Margaret M. Murnane, Henry C. Kapteyn

Abstract: Vacuum ultraviolet (VUV) light is critical for the study of molecules and materials, but the generation of femtosecond pulses in the VUV region at high repetition rates has proven difficult. Here, we demonstrate the efficient generation of VUV light at MHz repetition rates using highly cascaded four-wave mixing processes in a negative-curvature hollow-core fiber. Both even and odd order harmonics… ▽ More Vacuum ultraviolet (VUV) light is critical for the study of molecules and materials, but the generation of femtosecond pulses in the VUV region at high repetition rates has proven difficult. Here, we demonstrate the efficient generation of VUV light at MHz repetition rates using highly cascaded four-wave mixing processes in a negative-curvature hollow-core fiber. Both even and odd order harmonics are generated up to the 15th harmonic (69 nm, 18.0 eV), with high energy resolution of ~40 meV. In contrast to direct high harmonic generation, this highly cascaded harmonic generation process requires lower peak intensity and therefore can operate at higher repetition rates, driven by a robust ~10 W fiber-laser system in a compact setup. Additionally, we present numerical simulations that explore the fundamental capabilities and spatiotemporal dynamics of highly cascaded harmonic generation. This VUV source can enhance the capabilities of spectroscopies of molecular and quantum materials, such as photoionization mass spectrometry and time , angle , and spin-resolved photoemission. △ Less

Submitted 7 July, 2020; v1 submitted 28 April, 2020; originally announced April 2020.

Comments: 9 pages, 4 figures. Submitted to Optica (OSA)

Site-bond percolation solution to preventing the propagation of \textit{Phytophthora} zoospores on plantations

Authors: J. E. Ramírez, C. Pajares, M. I. Martínez, R. Rodríguez Fernández, E. Molina-Gayosso, J. Lozada-Lechuga, A. Fernández Téllez

Abstract: We propose a strategy based on the site-bond percolation to minimize the propagation of \textit{Phytophthora} zoospores on plantations, consisting in introducing physical barriers between neighboring plants. Two clustering processes are distinguished: i) one of cells with the presence of the pathogen, detected on soil analysis; and ii) that of diseased plants, revealed from a visual inspection of… ▽ More We propose a strategy based on the site-bond percolation to minimize the propagation of \textit{Phytophthora} zoospores on plantations, consisting in introducing physical barriers between neighboring plants. Two clustering processes are distinguished: i) one of cells with the presence of the pathogen, detected on soil analysis; and ii) that of diseased plants, revealed from a visual inspection of the plantation. The former is well described by the standard site-bond percolation. In the latter, the percolation threshold is fitted by a Tsallis distribution when no barriers are introduced. We provide, for both cases, the formulae for the minimal barrier density to prevent the emergence of the spanning cluster. Though this work is focused on a specific pathogen, the model presented here can also be applied to prevent the spreading of other pathogens that disseminate, by other means, from one plant to the neighboring ones. Finally, the application of this strategy to three types of commercialy important Mexican chili plants is also shown. △ Less

Submitted 20 April, 2020; originally announced April 2020.

Comments: 13 pages, 7 figures

Journal ref: Phys. Rev. E, 101, 032301, 2020

Optical modulation in Ge-rich SiGe waveguides in the mid-IR wavelength range up to 11 um

Authors: Miguel Montesinos-Ballester, Vladyslav Vakarin, Joan Manel Ramirez, Qiankun Liu, Carlos Alonso-Ramos, Xavier Le Roux, Jacopo Frigerio, Andrea Ballabio, Andrea Barzaghi, Lucas Deniel, David Bouville, Laurent Vivien, Giovanni Isella, Delphine Marris-Morini

Abstract: Waveguide integrated optical modulators in the mid-infrared (mid-IR) wavelength range are of significant interest for molecular spectroscopy in one hand, as on-chip synchronous detection can improve the performance of detection systems, and for free-space communications on the other hand, where optical modulators working in the atmospheric transparency windows are crucially missing. Here we report… ▽ More Waveguide integrated optical modulators in the mid-infrared (mid-IR) wavelength range are of significant interest for molecular spectroscopy in one hand, as on-chip synchronous detection can improve the performance of detection systems, and for free-space communications on the other hand, where optical modulators working in the atmospheric transparency windows are crucially missing. Here we report for the first time the demonstration of optical modulation in mid-IR photonic circuit reaching wavelengths larger than 8 um. Moreover, optical modulation in an unprecedented wavelength range, from 5.5 to 11 um wavelength is shown, relying on a broadband Ge-rich graded-SiGe platform. This first demonstration is used as a proof of concept, to experimentally confirm the free-carrier absorption effect modeling. These results pave the way towards efficient high-performance electrically-driven integrated optical modulators in the mid-IR wavelength range. △ Less

Submitted 25 November, 2019; originally announced November 2019.

Comments: 12 pages, 7 figures

Challenges in materials and devices for Resistive-Switching-based Neuromorphic Computing

Authors: Javier del Valle, Juan Gabriel Ramírez, Marcelo J. Rozenberg, Ivan K. Schuller

Abstract: This tutorial describes challenges and possible avenues for the implementation of the components of a solid-state system, which emulates a biological brain. The tutorial is devoted mostly to a charge-based (i.e. electric controlled) implementation using transition metal oxides materials, which exhibit unique properties that emulate key functionalities needed for this application. In the Introducti… ▽ More This tutorial describes challenges and possible avenues for the implementation of the components of a solid-state system, which emulates a biological brain. The tutorial is devoted mostly to a charge-based (i.e. electric controlled) implementation using transition metal oxides materials, which exhibit unique properties that emulate key functionalities needed for this application. In the Introduction, we compare the main differences between a conventional computational machine, based on the Turing-von Neumann paradigm, to a Neuromorphic machine, which tries to emulate important functionalities of a biological brain. We also describe the main electrical properties of biological systems, which would be useful to implement in a charge-based system. In Chapter II, we describe the main components of a possible solid-state implementation. In Chapter III, we describe a variety of Resistive Switching phenomena, which may serve as the functional basis for the implementation of key devices for Neuromorphic computing. In Chapter IV we describe why transition metal oxides, are promising materials for future Neuromorphic machines. Theoretical models describing different resistive switching mechanisms are discussed in Chapter V while existing implementations are described in Chapter VI. Chapter VII presents applications to practical problems. We list in Chapter VIII important basic research challenges and open issues. We discuss issues related to specific implementations, novel materials, devices and phenomena. The development of reliable, fault tolerant, energy efficient devices, their scaling and integration into a Neuromorphic computer may bring us closer to the development of a machine that rivals the brain. △ Less

Submitted 31 October, 2018; originally announced December 2018.

Comments: To appear in Journal of Applied Physics. 43 pages

Effects of the second virial coefficient on the adiabatic lapse rate of dry atmospheres

Authors: Emilio Alvarez Navarro, Bogar Díaz, Miguel Ángel García-Ariza, J. E. Ramírez

Abstract: We study the effect of the second virial coefficient on the adiabatic lapse rate of a dry atmosphere. To this end, we compute the corresponding adiabatic curves, the internal energy, and the heat capacity, among other thermodynamic parameters. We apply these results to Earth, Mars, Venus, Titan, and the exoplanet G1 851d, considering three physically relevant virial coefficients in each case: the… ▽ More We study the effect of the second virial coefficient on the adiabatic lapse rate of a dry atmosphere. To this end, we compute the corresponding adiabatic curves, the internal energy, and the heat capacity, among other thermodynamic parameters. We apply these results to Earth, Mars, Venus, Titan, and the exoplanet G1 851d, considering three physically relevant virial coefficients in each case: the hard-sphere, van der Waals, and the square-well potential. These examples illustrate under which atmospheric conditions the effect of the second virial coefficient is relevant. Taking the latter into account yields corrections towards the experimental values of the lapse rates of Venus and Titan in some instances. △ Less

Submitted 22 December, 2020; v1 submitted 24 October, 2018; originally announced October 2018.

Comments: 11 pages, 8 figures

Journal ref: Eur. Phys. J. Plus (2019) 134: 458

Energy Absorption and Low Velocity Impact Response of Open-Cell Polyurea Foams

Authors: Brian J. Ramirez, Vijay Gupta

Abstract: The energy absorption and impact attenuation of low density polyurea (PU) foams (140 - 220 kg/m3) is presented. The stress-strain behavior, energy absorption, cushioning efficiency, and energy return (resilience) are measured at a quasi-static strain rate using an Instron load frame. In addition, the low velocity impact attenuation of the polyurea foams at 5 J and 7 J impact energies were investig… ▽ More The energy absorption and impact attenuation of low density polyurea (PU) foams (140 - 220 kg/m3) is presented. The stress-strain behavior, energy absorption, cushioning efficiency, and energy return (resilience) are measured at a quasi-static strain rate using an Instron load frame. In addition, the low velocity impact attenuation of the polyurea foams at 5 J and 7 J impact energies were investigated according to the American Society for Testing and Materials (ASTM) test methods F1976. The polyurea foams were then compared with widely used ethylene vinyl acetate (EVA) and thermoplastic polyurethane (TPU) foam technologies at similar densities. The PU foams displayed a 5 % increase in cushioning efficiency and 30 % greater energy absorption over TPU and EVA foams under quasi-static compression. Under impact testing, PU foams resulted in a reduction of up to 28.6 % and 36.9 % in peak transmitted impact forces when compared to EVA and TPU foams of the same thickness (20 mm) at 5 J and 7 J, respectively. These properties should allow these materials to have a wide range of cushioning/impact applications, especially in protective body and headgear systems. △ Less

Submitted 8 October, 2018; originally announced October 2018.

Transport due to Transient Progressive Waves

Authors: Juan M. Restrepo, Jorge M. Ramirez

Abstract: We describe and analyze the mean transport due to transient progressive waves, including breaking waves. The waves are packets and are generated with a boundary-forced air-water two-phase Navier Stokes solver. The analysis is done in the Lagrangian frame. We show that the transport generated by these waves is significantly larger than the transport generated by steady waves. The numerically genera… ▽ More We describe and analyze the mean transport due to transient progressive waves, including breaking waves. The waves are packets and are generated with a boundary-forced air-water two-phase Navier Stokes solver. The analysis is done in the Lagrangian frame. We show that the transport generated by these waves is significantly larger than the transport generated by steady waves. The numerically generated parcel paths suggest a model for the transport that is primarily driven by an irrotational approximation of the velocity. Wave breaking is shown to increase the variability in the transport. Breaking is accounted for in the transport model via an additive stochastic velocity term. △ Less

Submitted 28 December, 2018; v1 submitted 28 August, 2018; originally announced August 2018.

Comments: for consideration at JFM

MSC Class: 76B15

Mass Exchange Dynamics of Surface and Subsurface Oil in Shallow-Water Transport

Authors: Saeed Moghimi, Jorge Ramirez, Juan M. Restrepo, Shankar C. Venkataramani

Abstract: We formulate a model for the mass exchange between oil at and below the sea surface. This is a particularly important aspect of modeling oil spills. Surface and subsurface oil have different chemical and transport characteristics and lum** them together would compromise the accuracy of the resulting model. Without observational or computational constraints, it is thus not possible to quantitativ… ▽ More We formulate a model for the mass exchange between oil at and below the sea surface. This is a particularly important aspect of modeling oil spills. Surface and subsurface oil have different chemical and transport characteristics and lum** them together would compromise the accuracy of the resulting model. Without observational or computational constraints, it is thus not possible to quantitatively predict oil spills based upon partial field observations of surface and/or sub-surface oil. The primary challenge in capturing the mass exchange is that the principal mechanisms are on the microscale. This is a serious barrier to develo** practical models for oil spills that are capable of addressing questions regarding the fate of oil at the large spatio-temporal scales, as demanded by environmental questions. We use upscaling to propose an environmental-scale model which incorporates the mass exchange between surface and subsurface oil due to oil droplet dynamics, buoyancy effects, and sea surface and subsurface mechanics. While the mass exchange mechanism detailed here is generally applicable to oil transport models, it addresses the modeling needs of a particular to an oil spill model [1]. This transport model is designed to capture oil spills at very large spatio-temporal scales. It accomplishes this goal by specializing to shallow-water environments, in which depth averaging is a perfectly good approximation for the flow, while at the same time retaining mass conservation of oil over the whole oceanic domain. △ Less

Submitted 15 March, 2017; originally announced March 2017.

Comments: 18 pages, 6 figures

Journal ref: Ocean Modeling, Vol. 129, September 2018, Pages 1-12

Tangential Fluid flow within 3D narrow fissures: Conservative velocity fields on associated triangulations and transport processes

Authors: Fernando A Morales, Jorge M Ramírez

Abstract: For a fissured medium with uncertainty in the knowledge of fractures' geometry, a conservative tangential flow field is constructed, which is consistent with the physics of stationary fluid flow in porous media and an interpolated geometry of the cracks. The flow field permits computing preferential fluid flow directions of the medium, rates of mechanical energy dissipations and a stochastic matri… ▽ More For a fissured medium with uncertainty in the knowledge of fractures' geometry, a conservative tangential flow field is constructed, which is consistent with the physics of stationary fluid flow in porous media and an interpolated geometry of the cracks. The flow field permits computing preferential fluid flow directions of the medium, rates of mechanical energy dissipations and a stochastic matrix modeling stream lines and fluid mass transportation, for the analysis of solute/contaminant mass advection-diffusion as well as drainage times. △ Less

Submitted 2 October, 2018; v1 submitted 28 November, 2016; originally announced November 2016.

Comments: 17 pages, 15 figures

MSC Class: 76S05; 97M99; 94A17

Journal ref: Mathematical Methods in the Applied Sciences, 2016

Non-perturbative Solution to the Quantum Interaction Problem via Schwinger's Action Principle

Authors: C. A. M. de Melo, B. M. Pimentel, J. A. Ramirez

Abstract: The most realistic situations in quantum mechanics involve the interaction between two or more systems. In the most of reliable models, the form and structure of the interactions generate differential equations which are, in the most of cases, almost impossible to solve exactly. In this paper, using the Schwinger Quantum Action Principle, we found the time transformation function that solves exact… ▽ More The most realistic situations in quantum mechanics involve the interaction between two or more systems. In the most of reliable models, the form and structure of the interactions generate differential equations which are, in the most of cases, almost impossible to solve exactly. In this paper, using the Schwinger Quantum Action Principle, we found the time transformation function that solves exactly the harmonic oscillator interacting with a set of other harmonic coupled oscillators. In order to do it, we have introduced a new special set of creation and annihilation operators which leads directly to the \emph{dressed states} associated to the system, which are the real quantum states of the interacting \emph{\textquotedblleft field-particle\textquotedblright} system. To obtain the closed solution, it is introduced in the same foot a set of \emph{normal mode} creation and annihilation operators of the system related to the first ones by an orthogonal transformation. We find the eigenstates, amplitude transitions and the system spectra without any approximation. At last, we show that the Schwinger Variational Principle provides the solutions in a free representation way. △ Less

Submitted 10 August, 2016; originally announced August 2016.

Comments: 22 pages

Low vibration high numerical aperture automated variable temperature Raman microscope

Authors: Yao Tian, Anjan A. Reijnders, Gavin B. Osterhoudt, Ilya Valmianski, J. G. Ramirez, Christian Urban, Ruidan Zhong, John Schneeloch, Genda Gu, Isaac Henslee, Kenneth S. Burch

Abstract: Raman micro-spectroscopy is well suited for studying a variety of properties and has been applied to wide- ranging areas. Combined with tuneable temperature, Raman spectra can offer even more insights into the properties of materials. However, previous designs of variable temperature Raman microscopes have made it extremely challenging to measure samples with low signal levels due to thermal and p… ▽ More Raman micro-spectroscopy is well suited for studying a variety of properties and has been applied to wide- ranging areas. Combined with tuneable temperature, Raman spectra can offer even more insights into the properties of materials. However, previous designs of variable temperature Raman microscopes have made it extremely challenging to measure samples with low signal levels due to thermal and positional instability as well as low collection efficiencies. Thus, contemporary Raman microscope has found limited applicability to probing the subtle physics involved in phase transitions and hysteresis. This paper describes a new design of a closed-cycle, Raman microscope with full polarization rotation. High collection efficiency, thermal and mechanical stability are ensured by both deliberate optical, cryogenic, and mechanical design. Measurements on two samples, Bi2Se3 and V2O3, which are known as challenging due to low thermal conductivities, low signal levels and/or hysteretic effects, are measured with previously undemonstrated temperature resolution. △ Less

Submitted 8 April, 2016; originally announced April 2016.

Comments: 11 pages, 13 figures

Journal ref: Review of Scientific Instruments 87, 043105 (2016)

Vertical coupling of laser glass microspheres to buried silicon nitride ellipses and waveguides

Authors: Daniel Navarro-Urrios, Joan Manel Ramirez, Nestor E. Capuj, Yonder Berencen, Blas Garrido, Alessandro Tredicucci

Abstract: We demonstrate the integration of Nd3+ doped Barium-Titanium-Silicate microsphere lasers with a Silicon Nitride photonic platform. Devices with two different geometrical configurations for extracting the laser light to buried waveguides have been fabricated and characterized. The first configuration relies on a standard coupling scheme, where the microspheres are placed over strip waveguides. The… ▽ More We demonstrate the integration of Nd3+ doped Barium-Titanium-Silicate microsphere lasers with a Silicon Nitride photonic platform. Devices with two different geometrical configurations for extracting the laser light to buried waveguides have been fabricated and characterized. The first configuration relies on a standard coupling scheme, where the microspheres are placed over strip waveguides. The second is based on a buried elliptical geometry whose working principle is that of an elliptical mirror. In the latter case, the input of a strip waveguide is placed on one focus of the ellipse, while a lasing microsphere is placed on top of the other focus. The fabricated elliptical geometry (ellipticity=0.9) presents a light collecting capacity that is 50% greater than that of the standard waveguide coupling configuration and could be further improved by increasing the ellipticity. Moreover, since the dimensions of the spheres are much smaller than those of the ellipses, surface planarization is not required. On the contrary, we show that the absence of a planarization step strongly damages the microsphere lasing performance in the standard configuration. △ Less

Submitted 29 June, 2015; originally announced June 2015.

Comments: 10 pages, 4 figures

Journal ref: Journal of Applied Physics, 118, 093103 (2015)

Far-field characterization of the thermal dynamics in lasing microspheres

Authors: J. M. Ramirez, D. Navarro-Urrios, N. E. Capuj, Y. Berencen, A. Pitanti, B. Garrido, A. Tredicucci

Abstract: This work reports the dynamical thermal behavior of lasing microspheres placed on a dielectric substrate while they are homogeneously heated-up by the top-pump laser used to excite the active medium. The lasing modes are collected in the far-field and their temporal spectral traces show characteristic lifetimes of about 2 ms. The latter values scale with the microsphere radius and are independent… ▽ More This work reports the dynamical thermal behavior of lasing microspheres placed on a dielectric substrate while they are homogeneously heated-up by the top-pump laser used to excite the active medium. The lasing modes are collected in the far-field and their temporal spectral traces show characteristic lifetimes of about 2 ms. The latter values scale with the microsphere radius and are independent of the pump power in the studied range. Finite-Element Method simulations reproduce the experimental results, revealing that the thermal dynamics is dominated by the heat dissipated towards the substrate through the medium surrounding the contact point. The characteristic system scale regarding thermal transport is of few hundreds of nanometers, thus enabling an effective toy model for investigating heat conduction in non-continuum gaseous media and near-field radiative energy transfer. △ Less

Submitted 13 April, 2015; originally announced April 2015.

Comments: 13 pages, 5 figures

Journal ref: Scientific Reports 5, 14452, (2015)

Polynomial law for controlling the generation of n-scroll chaotic attractors in an optoelectronic delayed oscillator

Authors: Bicky A. Márquez, José J. Suárez-Vargas, Javier A. Ramírez

Abstract: Controlled transitions between a hierarchy of n-scroll attractors are investigated in a nonlinear optoelectronic oscillator. Using the system's feedback strength as a control parameter, it is shown experimentally the transition from Van der Pol-like attractors to 6-scroll, but in general, this scheme can produce an arbitrary number of scrolls. The complexity of every state is characterized by Lyap… ▽ More Controlled transitions between a hierarchy of n-scroll attractors are investigated in a nonlinear optoelectronic oscillator. Using the system's feedback strength as a control parameter, it is shown experimentally the transition from Van der Pol-like attractors to 6-scroll, but in general, this scheme can produce an arbitrary number of scrolls. The complexity of every state is characterized by Lyapunov exponents and autocorrelation coefficients. △ Less

Submitted 23 August, 2014; v1 submitted 13 August, 2014; originally announced August 2014.

Comments: 5 pages, 7 figures

Journal ref: Chaos 24, 033123 (2014)

Variability Analysis of Complex Networks Measures based on Stochastic Distances

Authors: Raquel Cabral, Alejandro Frery, Jaime Ramírez

Abstract: Complex networks can model the structure and dynamics of different types of systems. It has been shown that they are characterized by a set of measures. In this work, we evaluate the variability of complex networks measures face to perturbations and, for this purpose, we impose controlled perturbations and quantify their effect. We analyze theoretical models (random, small-world and scale-free) an… ▽ More Complex networks can model the structure and dynamics of different types of systems. It has been shown that they are characterized by a set of measures. In this work, we evaluate the variability of complex networks measures face to perturbations and, for this purpose, we impose controlled perturbations and quantify their effect. We analyze theoretical models (random, small-world and scale-free) and real networks (a collaboration network and a metabolic networks) along with the shortest path length, vertex degree, local cluster coefficient and betweenness centrality measures. In such analysis, we propose the use of three stochastic quantifiers: the Kullback-Leibler divergence and the Jensen-Shannon and Hellinger distances. The sensitivity of these measures was analyzed with respect to the following perturbations: edge addition, edge removal, edge rewiring and node removal, all of them applied at different intensities. The results reveal that the evaluated measures are influenced by these perturbations. Additionally, hypotheses tests were performed to verify the behavior of the degree distribution to identify the intensity of the perturbations that leads to break this property. △ Less

Submitted 29 July, 2014; originally announced July 2014.

Structural Changes in Data Communication in Wireless Sensor Networks

Authors: Raquel S. Cabral, Andre L. L. Aquino, Alejandro C. Frery, Osvaldo A. Rosso, Jaime A. Ramírez

Abstract: Wireless sensor networks are an important technology for making distributed autonomous measures in hostile or inaccessible environments. Among the challenges they pose, the way data travel among them is a relevant issue since their structure is quite dynamic. The operational topology of such devices can often be described by complex networks. In this work, we assess the variation of measures commo… ▽ More Wireless sensor networks are an important technology for making distributed autonomous measures in hostile or inaccessible environments. Among the challenges they pose, the way data travel among them is a relevant issue since their structure is quite dynamic. The operational topology of such devices can often be described by complex networks. In this work, we assess the variation of measures commonly employed in the complex networks literature applied to wireless sensor networks. Four data communication strategies were considered: geometric, random, small-world, and scale-free models, along with the shortest path length measure. The sensitivity of this measure was analyzed with respect to the following perturbations: insertion and removal of nodes in the geometric strategy; and insertion, removal and rewiring of links in the other models. The assessment was performed using the normalized Kullback-Leibler divergence and Hellinger distance quantifiers, both deriving from the Information Theory framework. The results reveal that the shortest path length is sensitive to perturbations. △ Less

Submitted 13 August, 2013; originally announced August 2013.

Comments: 12 pages, 4 figures, Central European Journal of Physics

Modeling the oxygen K absorption in the interstellar medium: an {\it XMM}-Newton view of Sco X-1

Authors: J. García, J. M. Ramírez, T. R. Kallman, M. Witthoeft, M. A. Bautista, C. Mendoza, P. Palmeri, P. Quinet

Abstract: We investigate the absorption structure of the oxygen in the interstellar medium by analyzing {\it XMM}-Newton observations of the low mass X-ray binary Sco X-1. We use simple models based on the O {\sc i} atomic cross section from different sources to fit the data and evaluate the impact of the atomic data in the interpretation of astrophysical observations. We show that relatively small differen… ▽ More We investigate the absorption structure of the oxygen in the interstellar medium by analyzing {\it XMM}-Newton observations of the low mass X-ray binary Sco X-1. We use simple models based on the O {\sc i} atomic cross section from different sources to fit the data and evaluate the impact of the atomic data in the interpretation of astrophysical observations. We show that relatively small differences in the atomic calculations can yield spurious results. We also show that the most complete and accurate set of atomic cross sections successfully reproduce the observed data in the $21-24.5$ Å wavelength region of the spectrum. Our fits indicate that the absorption is mainly due to neutral gas with an ionization parameter of $ξ=10^{-4}$ erg cm s$^{-1}$, and an oxygen column density of $N_{\mathrm{O}}\approx 8-10\times 10^{17}$ cm$^{-2}$. Our models are able to reproduce both the K edge and the K$α$ absorption line from O {\sc i}, which are the two main features in this region. We find no conclusive evidence for absorption by other than atomic oxygen. △ Less

Submitted 10 February, 2011; v1 submitted 5 January, 2011; originally announced January 2011.

Comments: 15 pages, 4 figures, 1 table. Accepted for publication in ApJ Letters

Non-Adiabatic Solution to the Time Dependent Quantum Harmonic Oscillator

Authors: C. A. M. de Melo, B. M. Pimentel, J. A. Ramirez

Abstract: Using Schwinger Variational Principle we solve the problem of quantum harmonic oscillator with time dependent frequency. Here, we do not take the usual approach which implicitly assumes an adiabatic behavior for the frequency. Instead, we propose a new solution where the frequency only needs continuity in its first derivative or to have a finite set of removable discontinuities. Using Schwinger Variational Principle we solve the problem of quantum harmonic oscillator with time dependent frequency. Here, we do not take the usual approach which implicitly assumes an adiabatic behavior for the frequency. Instead, we propose a new solution where the frequency only needs continuity in its first derivative or to have a finite set of removable discontinuities. △ Less

Submitted 29 December, 2010; originally announced January 2011.

Comments: 7 pages