-
Controlled collision of drops in extensional flow using a six-port microfluidic device
Authors:
Aysan Razzaghi,
Arun Ramachandran
Abstract:
Collision of two dispersed drops in the matrix of suspending liquid is the first step toward coalescence. However, to quantify the rate of coalescence, the configuration of the collision should be definable and the force that induces the collision should be measurable. We present a strategy to use the hydrodynamic force in a six-port microfluidic channel to steer two drops towards collision in the…
▽ More
Collision of two dispersed drops in the matrix of suspending liquid is the first step toward coalescence. However, to quantify the rate of coalescence, the configuration of the collision should be definable and the force that induces the collision should be measurable. We present a strategy to use the hydrodynamic force in a six-port microfluidic channel to steer two drops towards collision in the extensional flow. By implementing the analytical solution in the control loop, the flow rates that are required to steer the drops toward their respective target points can be determined using a single control parameter. This parameter, $ χ^{*} $, is a dimensionless time scale that can manipulate the drops in one of the two manners: 1) by engaging all six ports to create a flow field with two stagnation points ($ χ^{*}\ll1 $), or 2) by deactivating some of the ports and creating a linear extensional flow through the remaining active ports ($ χ^{*}\gg1 $). We determine specific orientations that are more suitable for the collision of Hele-Shaw drops in the six-port microfluidic channel. Based on the above strategy, we design and perform controlled head-on and glancing collisions for ~100 $ μ$m radius Hele-Shaw perfluorodecalin drops in silicone oil. The analytical solution of the flow field accounting for the perturbation of the flow due to the hydrodynamic interactions between the Hele-Shaw drops was developed using the conformal map** technique. Coalescence time between two Hele-Shaw drops undergoing a head-on collision in a dimpled mode was found to be independent of the strain rate of the hydrodynamic flow.
△ Less
Submitted 8 March, 2023;
originally announced March 2023.
-
Microfluidic Isotachophoresis: Theory and Applications
Authors:
Ashwin Ramachandran,
Juan G. Santiago
Abstract:
Isotachophoresis (ITP) is a versatile electrophoretic technique which can be used for sample preconcentration, separation, purification, mixing, and control and acceleration of chemical reactions. Although the basic technique is nearly a century old and widely used, there has been a persistent need for an easily approachable, succinct, and rigorous review of ITP theory and analysis. This is import…
▽ More
Isotachophoresis (ITP) is a versatile electrophoretic technique which can be used for sample preconcentration, separation, purification, mixing, and control and acceleration of chemical reactions. Although the basic technique is nearly a century old and widely used, there has been a persistent need for an easily approachable, succinct, and rigorous review of ITP theory and analysis. This is important as interest and adoption of the technique has grown over the last two decades, especially because of its implementation into microfluidics and integration with on-chip chemical and biochemical assays. We here provide a review of ITP theory with a strong emphasis on steady and unsteady transport starting from physicochemical first principles including conservation of species, conservation of current, the approximation of charge neutrality, pH equilibrium of weak electrolytes, and so-called regulating functions governing transport dynamics. We combine these generally applicable (to all types of ITP) theoretical discussions with applications of ITP in the field of microfluidic systems, particularly on-chip biochemical analyses. Our discussion includes principles governing ITP focusing of weak and strong electrolytes, ITP dynamics in peak and plateau modes, review of simulation tools, experimental tools and detection methods, applications of ITP for on-chip separations and trace analyte manipulation, and design considerations and challenges for microfluidic ITP systems. We conclude with remarks on possible future research directions. The intent of this review is to help make ITP analysis and design principles more accessible to the scientific and engineering communities, and to provide a rigorous basis for increased adoption of ITP into microfluidics.
△ Less
Submitted 28 March, 2022; v1 submitted 21 August, 2021;
originally announced August 2021.
-
Radiative Cooling and Thermoregulation in the Earth's Glow
Authors:
Jyotirmoy Mandal,
Sagar Mandal,
John Brewer,
Arvind Ramachandran,
Aaswath Pattabhi Raman
Abstract:
Passive radiative cooling involves a net radiative heat loss into the cold outer space through the atmospheric transmission windows. Due to its passive nature and net cooling effect, it is a promising alternative or complement to electrical cooling. For efficient radiative cooling of objects, an unimpeded view of the sky is ideal. However, the view of the sky is usually limited - for instance, the…
▽ More
Passive radiative cooling involves a net radiative heat loss into the cold outer space through the atmospheric transmission windows. Due to its passive nature and net cooling effect, it is a promising alternative or complement to electrical cooling. For efficient radiative cooling of objects, an unimpeded view of the sky is ideal. However, the view of the sky is usually limited - for instance, the walls of buildings have >50% of their field of view subtended by the earth. Moreover, objects on earth become sources of heat under sunlight. Therefore, building walls with hot terrestrial objects in view experience reduced cooling or heating, even with materials optimized for heat loss into the sky. We show that by using materials with selective long-wavelength infrared (LWIR) emittances, vertical building facades experience higher cooling than achievable by using broadband thermal emitters like typical building envelopes. Intriguingly, this effect is pronounced in the summer and diminishes or even reverses during the winter, indicating a thermoregulation effect. The findings highlight a major opportunity to harness untapped energy savings in buildings.
△ Less
Submitted 7 May, 2021; v1 submitted 21 June, 2020;
originally announced June 2020.
-
Reliable Real-time Seismic Signal/Noise Discrimination with Machine Learning
Authors:
Men-Andrin Meier,
Zachary E. Ross,
Anshul Ramachandran,
Ashwin Balakrishna,
Suraj Nair,
Peter Kundzicz,
Zefeng Li,
Jennifer Andrews,
Egill Hauksson,
Yisong Yue
Abstract:
In Earthquake Early Warning (EEW), every sufficiently impulsive signal is potentially the first evidence for an unfolding large earthquake. More often than not, however, impulsive signals are mere nuisance signals. One of the most fundamental - and difficult - tasks in EEW is to rapidly and reliably discriminate real local earthquake signals from all other signals. This discrimination is necessari…
▽ More
In Earthquake Early Warning (EEW), every sufficiently impulsive signal is potentially the first evidence for an unfolding large earthquake. More often than not, however, impulsive signals are mere nuisance signals. One of the most fundamental - and difficult - tasks in EEW is to rapidly and reliably discriminate real local earthquake signals from all other signals. This discrimination is necessarily based on very little information, typically a few seconds worth of seismic waveforms from a small number of stations. As a result, current EEW systems struggle to avoid discrimination errors, and suffer from false and missed alerts. In this study we show how modern machine learning classifiers can strongly improve real-time signal/noise discrimination. We develop and compare a series of non-linear classifiers with variable architecture depths, including fully connected, convolutional (CNN) and recurrent neural networks, and a model that combines a generative adversarial network with a random forest (GAN+RF). We train all classifiers on the same data set, which includes 374k local earthquake records (M3.0-9.1) and 946k impulsive noise signals. We find that all classifiers outperform existing simple linear classifiers, and that complex models trained directly on the raw signals yield the greatest degree of improvement. Using 3s long waveform snippets, the CNN and the GAN+RF classifiers both reach 99.5% precision and 99.3% recall on an independent validation data set. Most misclassifications stem from impulsive teleseismic records, and from incorrectly labeled records in the data set. Our results suggest that machine learning classifiers can strongly improve the reliability and speed of EEW alerts.
△ Less
Submitted 10 January, 2019;
originally announced January 2019.
-
Unconventional Flatband Line States in Photonic Lieb Lattices
Authors:
Shiqi Xia,
Ajith Ramachandran,
Shiqiang Xia,
Denghui Li,
Xiuying Liu,
Liqin Tang,
Yi Hu,
Daohong Song,
**gjun Xu,
Daniel Leykam,
Sergej Flach,
Zhigang Chen
Abstract:
Flatband systems typically host "compact localized states"(CLS) due to destructive interference and macroscopic degeneracy of Bloch wave functions associated with a dispersionless energy band. Using a photonic Lieb lattice(LL), we show that conventional localized flatband states are inherently incomplete, with the missing modes manifested as extended line states which form non-contractible loops w…
▽ More
Flatband systems typically host "compact localized states"(CLS) due to destructive interference and macroscopic degeneracy of Bloch wave functions associated with a dispersionless energy band. Using a photonic Lieb lattice(LL), we show that conventional localized flatband states are inherently incomplete, with the missing modes manifested as extended line states which form non-contractible loops winding around the entire lattice. Experimentally, we develop a continuous-wave laser writing technique to establish a finite-sized photonic LL with specially-tailored boundaries, thereby directly observe the unusually extended flatband line states.Such unconventional line states cannot be expressed as a linear combination of the previously observed CLS but rather arise from the nontrivial real-space topology.The robustness of the line states to imperfect excitation conditions is discussed, and their potential applications are illustrated.
△ Less
Submitted 30 October, 2018;
originally announced October 2018.
-
Frequency analysis and resonant operation for efficient capacitive deionization
Authors:
Ashwin Ramachandran,
Steven A. Hawks,
Michael Stadermann,
Juan G. Santiago
Abstract:
Capacitive deionization (CDI) performance metrics can vary widely with operating methods. We here develop a theory around and experimentally demonstrate a new operation for CDI that uses sinusoidal forcing voltage (or sinusoidal current). We use a dynamic system modeling approach, and quantify the frequency response (amplitude and phase) of CDI effluent concentration, and demonstrate that CDI can…
▽ More
Capacitive deionization (CDI) performance metrics can vary widely with operating methods. We here develop a theory around and experimentally demonstrate a new operation for CDI that uses sinusoidal forcing voltage (or sinusoidal current). We use a dynamic system modeling approach, and quantify the frequency response (amplitude and phase) of CDI effluent concentration, and demonstrate that CDI can be modeled as a linear time invariant system. We validate this model with experiments, and show that a sinusoid voltage operation can simultaneously achieve high salt removal and strong energy performance, thus very likely making it superior to other conventional operating methods. Based on the underlying coupled phenomena of electrical charge (and ionic) transfer with bulk advection in CDI, we derive and validate experimentally the concept of using sinusoidal voltage forcing functions to achieve resonance-type operation for CDI. Despite the complexities of the system, we find a simple relation for the resonant time scale: the resonant time period is proportional to the geometric mean of the flow residence time and the electrical (RC) charging time. Operation at resonance implies the optimal balance between absolute amount of salt removed (in moles) and dilution (depending on the feed volume processed), thus resulting in the maximum average concentration reduction for the desalinated water. Using a generalized tool based on Fourier analysis, we show that most of the salt removal (~95%) for square and triangular voltage forcing waveforms is achieved by the fundamental Fourier (sinusoidal) mode. The frequency of higher Fourier modes precludes high flow efficiency for these modes, so these modes consume additional energy for minimal additional salt removed. This deficiency of higher frequency modes further highlights the advantage of DC-offset sinusoidal forcing for CDI operation.
△ Less
Submitted 7 June, 2018;
originally announced June 2018.
-
Performance Metrics for the Objective Assessment of Capacitive Deionization Systems
Authors:
Steven A. Hawks,
Ashwin Ramachandran,
Slawomir Porada,
Patrick G. Campbell,
Matthew E. Suss,
P. M. Biesheuvel,
Juan G. Santiago,
Michael Stadermann
Abstract:
In the growing field of capacitive deionization (CDI), a number of performance metrics have emerged to describe the desalination process. Unfortunately, the separation conditions under which these metrics are measured are often not specified, resulting in optimal performance at minimal removal. Here we outline a system of performance metrics and reporting conditions that resolves this issue. Our p…
▽ More
In the growing field of capacitive deionization (CDI), a number of performance metrics have emerged to describe the desalination process. Unfortunately, the separation conditions under which these metrics are measured are often not specified, resulting in optimal performance at minimal removal. Here we outline a system of performance metrics and reporting conditions that resolves this issue. Our proposed system is based on volumetric energy consumption (Wh/m$^3$) and throughput productivity (L/h/m$^2$) reported for a specific average concentration reduction, water recovery, and feed salinity. To facilitate and rationalize comparisons between devices, materials, and operation modes, we propose a nominal standard testing condition of removing 5 mM from a 20 mM NaCl feed solution at 50% water recovery for CDI research. Using this separation, we compare the desalination performance of a flow-through electrode (fte-CDI) cell and a flow between membrane (fb-MCDI) device, showing how significantly different systems can be compared in terms of generally desirable desalination characteristics. In general, we find that performance analysis must be considered carefully so to not allow for ambiguous separation conditions or the maximization of one metric at the expense of another. Additionally, for context we discuss a number of important underlying performance indicators and cell characteristics that are not performance measures in and of themselves but can be examined to better understand differences in performance.
△ Less
Submitted 31 July, 2018; v1 submitted 23 April, 2018;
originally announced May 2018.
-
Thermodynamics of Ion Separation by Electrosorption
Authors:
Ali Hemmatifar,
Ashwin Ramachandran,
Kang Liu,
Diego I. Oyarzun,
Martin Z. Bazant,
Juan G. Santiago
Abstract:
We present a simple, top-down approach for the calculation of minimum energy consumption of electrosorptive ion separation using variational form of the (Gibbs) free energy. We focus and expand on the case of electrostatic capacitive deionization (CDI), and the theoretical framework is independent of details of the double-layer charge distribution and is applicable to any thermodynamically consist…
▽ More
We present a simple, top-down approach for the calculation of minimum energy consumption of electrosorptive ion separation using variational form of the (Gibbs) free energy. We focus and expand on the case of electrostatic capacitive deionization (CDI), and the theoretical framework is independent of details of the double-layer charge distribution and is applicable to any thermodynamically consistent model, such as the Gouy-Chapman-Stern (GCS) and modified Donnan (mD) models. We demonstrate that, under certain assumptions, the minimum required electric work energy is indeed equivalent to the free energy of separation. Using the theory, we define the thermodynamic efficiency of CDI. We explore the thermodynamic efficiency of current experimental CDI systems and show that these are currently very low, less than 1% for most existing systems. We applied this knowledge and constructed and operated a CDI cell to show that judicious selection of the materials, geometry, and process parameters can be used to achieve a 9% thermodynamic efficiency (4.6 kT energy per removed ion). This relatively high value is, to our knowledge, by far the highest thermodynamic efficiency ever demonstrated for CDI. We hypothesize that efficiency can be further improved by further reduction of CDI cell series resistances and optimization of operational parameters.
△ Less
Submitted 30 March, 2018;
originally announced March 2018.
-
Flat-band localization and self-collimation of light in photonic crystals
Authors:
Nojoon Myoung,
Hee Chul Park,
Ajith Ramachandran,
Elefterios Lidorikis,
Jung-Wan Ryu
Abstract:
We investigate the optical properties of a photonic crystal composed of a quasi-one-dimensional flat-band lattice array through finite-difference time-domain simulations. The photonic bands contain flat bands (FBs) at specific frequencies, which correspond to compact localized states as a consequence of destructive interference. The FBs are shown to be nondispersive along the $Γ\rightarrow X$ line…
▽ More
We investigate the optical properties of a photonic crystal composed of a quasi-one-dimensional flat-band lattice array through finite-difference time-domain simulations. The photonic bands contain flat bands (FBs) at specific frequencies, which correspond to compact localized states as a consequence of destructive interference. The FBs are shown to be nondispersive along the $Γ\rightarrow X$ line, but dispersive along the $Γ\rightarrow Y$ line. The FB localization of light in a single direction only results in a self-collimation of light propagation throughout the photonic crystal at the FB frequency.
△ Less
Submitted 25 January, 2018;
originally announced January 2018.
-
High-gravity Spreading of Liquid Coatings on Wetting Flexible Substrates
Authors:
Chen Yang,
Adam Burrous,
**g** Xie,
Hassan Shaikh,
Akofa Elike-Avion,
Luis Rojas,
Adithya Ramachandran,
Wonjae Choi,
Aaron D. Mazzeo
Abstract:
This work describes a mechanical approach for manipulating the capillary length and spreading of liquid coatings on flexible substrates with high gravity. Experimental verification in the literature has focused on cases under standard gravity on earth, and to the authors' knowledge, this work is the first to explore its relevance to spreading puddles under high gravity. By using centrifugation wit…
▽ More
This work describes a mechanical approach for manipulating the capillary length and spreading of liquid coatings on flexible substrates with high gravity. Experimental verification in the literature has focused on cases under standard gravity on earth, and to the authors' knowledge, this work is the first to explore its relevance to spreading puddles under high gravity. By using centrifugation with a high-density liquid base underneath a coated substrate, it is possible to apply acceleration normal to a substrate to decrease the capillary length and increase the rate of spreading. Due to the nature of centrifugation, this method works primarily on flexible substrates, which bend with a curvature that conforms to a contour of uniformly distributed centrifugal acceleration. With high gravity of 600 g applied, the capillary length reduces by a factor of 24.5, and the spreading shifts from "transient spreading" between the surface tension-driven and gravity-driven regimes to the gravity-driven regime. Experimental results show that high gravitational acceleration will enhance the rate of spreading such that a puddle, which would require 12 hours under standard gravity on earth to go from an 8-μl droplet to a 40-μm thick puddle, would require less than 1 minute under 600 g. Overall, this work suggests that previously derived expressions for gravity-driven spreading of puddles under earth's standard gravity extend to predicting the behavior of puddles spreading on smooth, wetting substrates exposed to more than 100 g's of acceleration.
△ Less
Submitted 14 September, 2015;
originally announced September 2015.
-
Who Contributes to the Knowledge Sharing Economy?
Authors:
Arthi Ramachandran,
Augustin Chaintreau
Abstract:
Information sharing dynamics of social networks rely on a small set of influencers to effectively reach a large audience. Our recent results and observations demonstrate that the shape and identity of this elite, especially those contributing \emph{original} content, is difficult to predict. Information acquisition is often cited as an example of a public good. However, this emerging and powerful…
▽ More
Information sharing dynamics of social networks rely on a small set of influencers to effectively reach a large audience. Our recent results and observations demonstrate that the shape and identity of this elite, especially those contributing \emph{original} content, is difficult to predict. Information acquisition is often cited as an example of a public good. However, this emerging and powerful theory has yet to provably offer qualitative insights on how specialization of users into active and passive participants occurs.
This paper bridges, for the first time, the theory of public goods and the analysis of diffusion in social media. We introduce a non-linear model of \emph{perishable} public goods, leveraging new observations about sharing of media sources. The primary contribution of this work is to show that \emph{shelf time}, which characterizes the rate at which content get renewed, is a critical factor in audience participation. Our model proves a fundamental \emph{dichotomy} in information diffusion: While short-lived content has simple and predictable diffusion, long-lived content has complex specialization. This occurs even when all information seekers are \emph{ex ante} identical and could be a contributing factor to the difficulty of predicting social network participation and evolution.
△ Less
Submitted 27 August, 2015;
originally announced August 2015.
