-
Optical tuning of the diamond Fermi level measured by correlated scanning probe microscopy and quantum defect spectroscopy
Authors:
Christian Pederson,
Rajiv Giridharagopal,
Fang Zhao,
Scott T. Dunham,
Yevgeny Raitses,
David S. Ginger,
Kai-Mei C. Fu
Abstract:
Quantum technologies based on quantum point defects in crystals require control over the defect charge state. Here we tune the charge state of shallow nitrogen-vacancy and silicon-vacancy centers by locally oxidizing a hydrogenated surface with moderate optical excitation and simultaneous spectral monitoring. The loss of conductivity and change in work function due to oxidation are measured in atm…
▽ More
Quantum technologies based on quantum point defects in crystals require control over the defect charge state. Here we tune the charge state of shallow nitrogen-vacancy and silicon-vacancy centers by locally oxidizing a hydrogenated surface with moderate optical excitation and simultaneous spectral monitoring. The loss of conductivity and change in work function due to oxidation are measured in atmosphere using conductive atomic force microscopy (C-AFM) and Kelvin probe force microscopy (KPFM). We correlate these scanning probe measurements with optical spectroscopy of the nitrogen-vacancy and silicon-vacancy centers created via implantation and annealing 15-25 nm beneath the diamond surface. The observed charge state of the defects as a function of optical exposure demonstrates that laser oxidation provides a way to precisely tune the Fermi level over a range of at least 2.00 eV. We also observe a significantly larger oxidation rate for implanted surfaces compared to unimplanted surfaces under ambient conditions. Combined with knowledge of the electron affinity of a surface, these results suggest KPFM is a powerful, high-spatial resolution technique to advance surface Fermi level engineering for charge stabilization of quantum defects.
△ Less
Submitted 27 September, 2023;
originally announced September 2023.
-
Kinetic Suppression of Photoinduced Halide Migration in Wide Bandgap Perovskites via Surface Passivation
Authors:
Farhad Akrami,
Fangyuan Jiang,
Rajiv Giridharagopal,
David S. Ginger
Abstract:
In this work, we study the kinetics of photoinduced halide migration in FA$_{0.8}$Cs$_{0.2}$Pb(I$_{0.8}$Br$_{0.2}$)$_3$ wide (~1.69 eV) bandgap perovskites and show halide migration slows down following surface passivation with (3-aminopropyl) trimethoxysilane (APTMS). We use scanning Kelvin probe microscopy (SKPM) to probe the contact potential difference (CPD) shift under illumination, and the k…
▽ More
In this work, we study the kinetics of photoinduced halide migration in FA$_{0.8}$Cs$_{0.2}$Pb(I$_{0.8}$Br$_{0.2}$)$_3$ wide (~1.69 eV) bandgap perovskites and show halide migration slows down following surface passivation with (3-aminopropyl) trimethoxysilane (APTMS). We use scanning Kelvin probe microscopy (SKPM) to probe the contact potential difference (CPD) shift under illumination, and the kinetics of surface potential relaxation in the dark. Our results show APTMS-passivated perovskites exhibit a smaller CPD shift under illumination, and a slower surface potential relaxation in the dark. We compare the evolution of the photoluminescence spectra of APTMS-passivated and unpassivated perovskites under illumination. We find that APTMS-passivated perovskites exhibit more than 5 times slower photoluminescence redshift, consistent with the slower surface potential relaxation as observed by SKPM. These observations provide evidence for kinetic suppression of photoinduced halide migration in APTMS-passivated samples, likely due to reduced halide vacancy densities, opening avenues to more efficient and stable devices.
△ Less
Submitted 11 September, 2023;
originally announced September 2023.
-
Super Phantoms: advanced models for testing medical imaging technologies
Authors:
Srirang Manohar,
Ioannis Sechopoulos,
Mark A. Anastasio,
Lena Maier-Hein,
Rajiv,
Gupta
Abstract:
Phantoms are test objects used for initial testing and optimization of medical imaging techniques, but these rarely capture the complex properties of the tissue. Here we introduce super phantoms, that surpass standard phantoms being able to replicate complex anatomic and functional imaging properties of tissues and organs. These super phantoms can be computer models, inanimate physical objects, or…
▽ More
Phantoms are test objects used for initial testing and optimization of medical imaging techniques, but these rarely capture the complex properties of the tissue. Here we introduce super phantoms, that surpass standard phantoms being able to replicate complex anatomic and functional imaging properties of tissues and organs. These super phantoms can be computer models, inanimate physical objects, or ex-vivo organs. Testing on these super phantoms, will enable iterative improvements well before in-vivo studies, fostering innovation. We illustrate super phantom examples, address development challenges, and envision centralized facilities supporting multiple institutions in applying these models for medical advancements.
△ Less
Submitted 8 April, 2024; v1 submitted 24 August, 2023;
originally announced August 2023.
-
Novel Physics-Based Machine-Learning Models for Indoor Air Quality Approximations
Authors:
Ahmad Mohammadshirazi,
Aida Nadafian,
Amin Karimi Monsefi,
Mohammad H. Rafiei,
Rajiv Ramnath
Abstract:
Cost-effective sensors are capable of real-time capturing a variety of air quality-related modalities from different pollutant concentrations to indoor/outdoor humidity and temperature. Machine learning (ML) models are capable of performing air-quality "ahead-of-time" approximations. Undoubtedly, accurate indoor air quality approximation significantly helps provide a healthy indoor environment, op…
▽ More
Cost-effective sensors are capable of real-time capturing a variety of air quality-related modalities from different pollutant concentrations to indoor/outdoor humidity and temperature. Machine learning (ML) models are capable of performing air-quality "ahead-of-time" approximations. Undoubtedly, accurate indoor air quality approximation significantly helps provide a healthy indoor environment, optimize associated energy consumption, and offer human comfort. However, it is crucial to design an ML architecture to capture the domain knowledge, so-called problem physics. In this study, we propose six novel physics-based ML models for accurate indoor pollutant concentration approximations. The proposed models include an adroit combination of state-space concepts in physics, Gated Recurrent Units, and Decomposition techniques. The proposed models were illustrated using data collected from five offices in a commercial building in California. The proposed models are shown to be less complex, computationally more efficient, and more accurate than similar state-of-the-art transformer-based models. The superiority of the proposed models is due to their relatively light architecture (computational efficiency) and, more importantly, their ability to capture the underlying highly nonlinear patterns embedded in the often contaminated sensor-collected indoor air quality temporal data.
△ Less
Submitted 2 August, 2023;
originally announced August 2023.
-
Prediction of nanobubble-assisted focused ultrasound-induced blood-brain barrier opening with machine learning
Authors:
Wen**g Li,
Chenchen Bing,
Haixin Dai,
Rajiv Chopra,
Qian Wang,
Bingbing Cheng
Abstract:
Novel approaches for predicting the outcomes of blood-brain barrier (BBB) opening with focused ultrasound (FUS) and microbubbles are highly desired. This study aims to explore machine learning-based methods for reliably predicting the FUS-induced BBB opening efficacy and safety. Methods: Sixteen female rats were used in this study. An acoustic feedback-controlled FUS system (f0: 0.5MHz) was used f…
▽ More
Novel approaches for predicting the outcomes of blood-brain barrier (BBB) opening with focused ultrasound (FUS) and microbubbles are highly desired. This study aims to explore machine learning-based methods for reliably predicting the FUS-induced BBB opening efficacy and safety. Methods: Sixteen female rats were used in this study. An acoustic feedback-controlled FUS system (f0: 0.5MHz) was used for the BBB opening with the infusion of custom-made nanobubbles/Definity. Evans Blue was injected for the BBB opening efficacy verification and the brain tissue was harvested for the safety assessment. Acoustic emissions were recorded, preprocessed and fed into three machine learning models for BBB opening outcomes prediction. Conventional stable and inertial cavitation dose were also calculated. Results: Among the tested machine learning models, a modified Support Vector Data Description (mSVDD) model achieved the best performance in the BBB opening efficacy and safety prediction with an accuracy of 85.0+/-16.6% and 62.5+/-12.8%, respectively. Conventional stable and inertial cavitation dose-based prediction has a prediction accuracy of 80.0% in efficacy and 34.3% in safety, respectively. The mSVDD model trained with the overall bubble response (0-2 MHz) performed better than that trained with the ultra-harmonic bubble response (0.7-0.8 MHz) in both efficacy prediction (85.0+/-16.6% vs 76.0+/-8.0%, p=0.04) and safety prediction (62.5+/-12.8% vs 55.0+/-10.7%, p>0.05). It is also found that the mSVDD model trained with nanobubble data cannot be directly applied to Definity. Conclusion: Our investigations demonstrated that it is feasible to achieve a reliable prediction of FUS-induced BBB opening outcomes with machine learning and acoustic signals from stimulated nanobubbles. This study provided a new approach for the prediction of FUS-BBB opening outcomes with a clinical translation potential.
△ Less
Submitted 6 June, 2023;
originally announced June 2023.
-
Why accumulation mode organic electrochemical transistors turn off much faster than they turn on
Authors:
Jiajie Guo,
Shinya E. Chen,
Rajiv Giridharagopa,
Connor G. Bischak,
Jonathan W. Onorato,
Kangrong Yan,
Ziqiu Shen,
Chang-Zhi Li,
Christine K. Luscombe,
David S. Ginger
Abstract:
Understanding the factors underpinning device switching times is crucial for the implementation of organic electrochemical transistors (OECTs) in neuromorphic computing and real-time sensing applications. Existing models of device operation cannot explain the experimental observations that turn-off times are generally much faster than turn-on times in accumulation mode OECTs. Through operando opti…
▽ More
Understanding the factors underpinning device switching times is crucial for the implementation of organic electrochemical transistors (OECTs) in neuromorphic computing and real-time sensing applications. Existing models of device operation cannot explain the experimental observations that turn-off times are generally much faster than turn-on times in accumulation mode OECTs. Through operando optical microscopy, we image the local do** level of the transistor channel and show that device turn-on occurs in two stages, while turn-off occurs in one stage. We attribute the faster turn-off to a combination of engineering as well as physical and chemical factors including channel geometry, differences in do** and dedo** kinetics, and the physical phenomena of carrier density-dependent mobility. We show that ion transport is limiting the device operation speed in our model devices. Our study provides insights into the kinetics of OECTs and guidelines for engineering faster OECTs.
△ Less
Submitted 1 May, 2023;
originally announced May 2023.
-
Surface Passivation Suppresses Local Ion Motion in Halide Perovskites
Authors:
Justin Pothoof,
Robert J. E. Westbrook,
Rajiv Giridharagopal,
Madeleine D. Breshears,
David S. Ginger
Abstract:
We use scanning probe microscopy to study ion migration in the formamidinium (FA)-containing halide perovskite semiconductor $Cs_{0.22}FA_{0.78}Pb(I_{0.85}Br_{0.15})_3$ in the presence and absence of chemical surface passivation. We measure the evolving contact potential difference (CPD) using scanning Kelvin probe microscopy (SKPM) following voltage poling. We find that ion migration leads to a ~…
▽ More
We use scanning probe microscopy to study ion migration in the formamidinium (FA)-containing halide perovskite semiconductor $Cs_{0.22}FA_{0.78}Pb(I_{0.85}Br_{0.15})_3$ in the presence and absence of chemical surface passivation. We measure the evolving contact potential difference (CPD) using scanning Kelvin probe microscopy (SKPM) following voltage poling. We find that ion migration leads to a ~100 mV shift in the CPD of control films after poling with 3V for only a few seconds. Moreover, we find that ion migration is heterogeneous, with domain interfaces leading to a larger shift in the CPD. Application of (3-aminopropyl)trimethoxysilane (APTMS) as a surface passivator further leads to 5-fold reduction in the CPD shift from ~100 meV to ~20 meV. We use hyperspectral microscopy to show that APTMS-treated perovskite films undergo less photoinduced halide migration than control films. We interpret these results as due to a reduction in halide vacancy concentration due to passivation with APTMS.
△ Less
Submitted 11 April, 2023;
originally announced April 2023.
-
Allegro-Legato: Scalable, Fast, and Robust Neural-Network Quantum Molecular Dynamics via Sharpness-Aware Minimization
Authors:
Hikaru Ibayashi,
Taufeq Mohammed Razakh,
Liqiu Yang,
Thomas Linker,
Marco Olguin,
Shinnosuke Hattori,
Ye Luo,
Rajiv K. Kalia,
Aiichiro Nakano,
Ken-ichi Nomura,
Priya Vashishta
Abstract:
Neural-network quantum molecular dynamics (NNQMD) simulations based on machine learning are revolutionizing atomistic simulations of materials by providing quantum-mechanical accuracy but orders-of-magnitude faster, illustrated by ACM Gordon Bell prize (2020) and finalist (2021). State-of-the-art (SOTA) NNQMD model founded on group theory featuring rotational equivariance and local descriptors has…
▽ More
Neural-network quantum molecular dynamics (NNQMD) simulations based on machine learning are revolutionizing atomistic simulations of materials by providing quantum-mechanical accuracy but orders-of-magnitude faster, illustrated by ACM Gordon Bell prize (2020) and finalist (2021). State-of-the-art (SOTA) NNQMD model founded on group theory featuring rotational equivariance and local descriptors has provided much higher accuracy and speed than those models, thus named Allegro (meaning fast). On massively parallel supercomputers, however, it suffers a fidelity-scaling problem, where growing number of unphysical predictions of interatomic forces prohibits simulations involving larger numbers of atoms for longer times. Here, we solve this problem by combining the Allegro model with sharpness aware minimization (SAM) for enhancing the robustness of model through improved smoothness of the loss landscape. The resulting Allegro-Legato (meaning fast and "smooth") model was shown to elongate the time-to-failure $t_\textrm{failure}$, without sacrificing computational speed or accuracy. Specifically, Allegro-Legato exhibits much weaker dependence of timei-to-failure on the problem size, $t_{\textrm{failure}} \propto N^{-0.14}$ ($N$ is the number of atoms) compared to the SOTA Allegro model $\left(t_{\textrm{failure}} \propto N^{-0.29}\right)$, i.e., systematically delayed time-to-failure, thus allowing much larger and longer NNQMD simulations without failure. The model also exhibits excellent computational scalability and GPU acceleration on the Polaris supercomputer at Argonne Leadership Computing Facility. Such scalable, accurate, fast and robust NNQMD models will likely find broad applications in NNQMD simulations on emerging exaflop/s computers, with a specific example of accounting for nuclear quantum effects in the dynamics of ammonia.
△ Less
Submitted 14 March, 2023;
originally announced March 2023.
-
Pressure-Dependent Layer-by-Layer Oxidation of ZrS2(001) Surface
Authors:
Liqiu Yang,
Rafael Jaramillo,
Rajiv K. Kalia,
Aiichiro Nakano,
Priya Vashishta
Abstract:
Understanding oxidation mechanisms of layered semiconducting transition-metal dichalcogenide (TMDC) is important not only for controlling native oxide formation but also for synthesis of oxide and oxysulfide products. Here, reactive molecular dynamics simulations show that oxygen partial pressure controls not only the ZrS2 oxidation rate but also the oxide morphology and quality. We find a transit…
▽ More
Understanding oxidation mechanisms of layered semiconducting transition-metal dichalcogenide (TMDC) is important not only for controlling native oxide formation but also for synthesis of oxide and oxysulfide products. Here, reactive molecular dynamics simulations show that oxygen partial pressure controls not only the ZrS2 oxidation rate but also the oxide morphology and quality. We find a transition from layer-by-layer oxidation to amorphous-oxide-mediated continuous oxidation as the oxidation progresses, where different pressures selectively expose different oxidation stages within a given time window. While the kinetics of the fast continuous oxidation stage is well described by the conventional Deal-Grove model, the layer-by-layer oxidation stage is dictated by reactive bond-switching mechanisms. This work provides atomistic details and a potential foundation for rational pressure-controlled oxidation of broad TMDC materials.
△ Less
Submitted 6 March, 2023;
originally announced March 2023.
-
Using Cryogenic CMOS Control Electronics To Enable A Two-Qubit Cross-Resonance Gate
Authors:
Devin L. Underwood,
Joseph A. Glick,
Ken Inoue,
David J. Frank,
John Timmerwilke,
Emily Pritchett,
Sudipto Chakraborty,
Kevin Tien,
Mark Yeck,
John F. Bulzacchelli,
Chris Baks,
Pat Rosno,
Raphael Robertazzi,
Matthew Beck,
Rajiv V. Joshi,
Dorothy Wisnieff,
Daniel Ramirez,
Jeff Ruedinger,
Scott Lekuch,
Brian P. Gaucher,
Daniel J. Friedman
Abstract:
Qubit control electronics composed of CMOS circuits are of critical interest for next generation quantum computing systems. A CMOS-based application specific integrated circuit (ASIC) fabricated in 14nm FinFET technology was used to generate and sequence qubit control waveforms and demonstrate a two-qubit cross resonance gate between fixed frequency transmons. The controller was thermally anchored…
▽ More
Qubit control electronics composed of CMOS circuits are of critical interest for next generation quantum computing systems. A CMOS-based application specific integrated circuit (ASIC) fabricated in 14nm FinFET technology was used to generate and sequence qubit control waveforms and demonstrate a two-qubit cross resonance gate between fixed frequency transmons. The controller was thermally anchored to the T = 4K stage of a dilution refrigerator and the measured power was 23 mW per qubit under active control. The chip generated single--side banded output frequencies between 4.5 and 5.5 GHz with a maximum power output of -18 dBm. Randomized benchmarking (RB) experiments revealed an average number of 1.71 instructions per Clifford (IPC) for single-qubit gates, and 17.51 IPC for two-qubit gates. A single-qubit error per gate of $ε_{\text{1Q}}$=8e-4 and two-qubit error per gate of $ε_\text{2Q}$=1.4e-2 is shown. A drive-induced Z-rotation is observed by way of a rotary echo experiment; this observation is consistent with expected qubit behavior given measured excess local oscillator (LO) leakage from the CMOS chip. The effect of spurious drive induced Z-errors is numerically evaluated with a two-qubit model Hamiltonian, and shown to be in good agreement with measured RB data. The modeling results suggest the Z-error varies linearly with pulse amplitude.
△ Less
Submitted 8 December, 2023; v1 submitted 22 February, 2023;
originally announced February 2023.
-
Optimized time-lapse acquisition design via spectral gap ratio minimization
Authors:
Yijun Zhang,
Ziyi Yin,
Oscar Lopez,
Ali Siahkoohi,
Mathias Louboutin,
Rajiv Kumar,
Felix J. Herrmann
Abstract:
Modern-day reservoir management and monitoring of geological carbon storage increasingly call for costly time-lapse seismic data collection. In this letter, we show how techniques from graph theory can be used to optimize acquisition geometries for low-cost sparse 4D seismic. Based on midpoint-offset domain connectivity arguments, the proposed algorithm automatically produces sparse non-replicated…
▽ More
Modern-day reservoir management and monitoring of geological carbon storage increasingly call for costly time-lapse seismic data collection. In this letter, we show how techniques from graph theory can be used to optimize acquisition geometries for low-cost sparse 4D seismic. Based on midpoint-offset domain connectivity arguments, the proposed algorithm automatically produces sparse non-replicated time-lapse acquisition geometries that favor wavefield recovery.
△ Less
Submitted 2 February, 2023;
originally announced February 2023.
-
Warming inhibits Increases in Vegetation Net Primary Productivity despite Greening in India
Authors:
Ripan Das,
Rajiv Kumar Chaturvedi,
Adrija Roy,
Subhankar Karmakar,
Subimal Ghosh
Abstract:
India is the second-highest contributor to the post-2000 global greening. With satellite data, here we show that this 18.51% increase in Leaf Area Index (LAI) during 2001-2019 fails to translate into increased carbon uptake due to warming constraints. Our analysis further shows 6.19% decrease in Net Primary Productivity (NPP) during 2001-2019 over the temporally consistent forests in India despite…
▽ More
India is the second-highest contributor to the post-2000 global greening. With satellite data, here we show that this 18.51% increase in Leaf Area Index (LAI) during 2001-2019 fails to translate into increased carbon uptake due to warming constraints. Our analysis further shows 6.19% decrease in Net Primary Productivity (NPP) during 2001-2019 over the temporally consistent forests in India despite 6.75% increase in LAI. We identify hotspots of statistically significant decreasing trends in NPP over the key forested regions of Northeast India, Peninsular India, and the Western Ghats. Together, these areas contribute to 31% of the NPP of India (1274.8 TgC.year -1). These regions are the warming hotspots in India. Decreasing photosynthesis and stable respiration, above a threshold temperature, are the key reasons behind the declining NPP. Warming has already started affecting carbon uptake in Indian forests and calls for improved climate resilient forest management practices in a warming world.
△ Less
Submitted 1 December, 2022;
originally announced December 2022.
-
Asymmetric split-ring plasmonic nanostructures for optical sensing of Escherichia coli
Authors:
Domna G. Kotsifaki,
Rajiv Ranjan Singh,
Sile Nic Chormaic,
Viet Giang Truong
Abstract:
Strategies for in-liquid micro-organism detection are crucial for the clinical and pharmaceutical industries. While Raman spectroscopy is a promising label-free technique for micro-organism detection, it remains challenging due to the weak bacterial Raman signals. In this work, we exploit the unique electromagnetic properties of metamaterials to identify bacterial components in liquid using an arr…
▽ More
Strategies for in-liquid micro-organism detection are crucial for the clinical and pharmaceutical industries. While Raman spectroscopy is a promising label-free technique for micro-organism detection, it remains challenging due to the weak bacterial Raman signals. In this work, we exploit the unique electromagnetic properties of metamaterials to identify bacterial components in liquid using an array of Fano-resonant metamolecules. This Fano-enhanced Raman scattering (FERS) platform is designed to exhibit a Fano resonance close to the protein amide group fingerprint around 6030 nm. Raman signatures of Escherichia coli were recorded at several locations on the metamaterial under off-resonance laser excitation at 530 nm, where the photodamage effect is minimized. As the sizes of the Escherichia coli are comparable to the micro-gaps, i.e 0.41 μm, of the metamaterials, its local immobilisation leads to an increase in the Raman sensitivity. We also observed that the time-dependent FERS signal related to bacterial amide peaks increased during the bacteria's mid-exponential phase while it decreased during the stationary phase. This work provides a new set of opportunities for develo** ultrasensitive FERS platforms suitable for large-scale applications and could be particularly useful for diagnostics and environmental studies at off-resonance excitation.
△ Less
Submitted 16 August, 2023; v1 submitted 25 November, 2022;
originally announced November 2022.
-
(3-Aminopropyl)trimethoxysilane Surface Passivation Improves Perovskite Solar Cell Performance by Reducing Surface Recombination Velocity
Authors:
Yangwei Shi,
Esteban Rojas-Gatjens,
Jian Wang,
Justin Pothoof,
Rajiv Giridharagopal,
Kevin Ho,
Fangyuan Jiang,
Margherita Taddei,
Zhaoqing Yang,
Carlos Silva-Acuña,
David S. Ginger
Abstract:
We demonstrate reduced surface recombination velocity (SRV) and enhanced power-conversion efficiency (PCE) in mixed-cation mixed-halide perovskite solar cells by using (3-aminopropyl)trimethoxysilane (APTMS) as a surface passivator. We show the APTMS serves to passivate defects at the perovskite surface, while also decoupling the perovskite from detrimental interactions at the C60 interface. We me…
▽ More
We demonstrate reduced surface recombination velocity (SRV) and enhanced power-conversion efficiency (PCE) in mixed-cation mixed-halide perovskite solar cells by using (3-aminopropyl)trimethoxysilane (APTMS) as a surface passivator. We show the APTMS serves to passivate defects at the perovskite surface, while also decoupling the perovskite from detrimental interactions at the C60 interface. We measure a SRV of ~125 + 14 cm/s, and a concomitant increase of ~100 meV in quasi-Fermi level splitting in passivated devices compared to the controls. We use time-resolved photoluminescence and excitation-correlation photoluminescence spectroscopy to show that APTMS passivation effectively suppresses non-radiative recombination. We show that APTMS improves both the fill factor and open-circuit voltage (VOC), increasing VOC from 1.03 V for control devices to 1.09 V for APTMS-passivated devices, which leads to PCE increasing from 15.90% to 18.03%. We attribute enhanced performance to reduced defect density or suppressed nonradiative recombination and low SRV at the perovskite/transporting layers interface.
△ Less
Submitted 29 September, 2022;
originally announced September 2022.
-
Deriving Surface Resistivity from Polarimetric SAR Data Using Dual-Input UNet
Authors:
Bibin Wilson,
Rajiv Kumar,
Narayanarao Bhogapurapu,
Anand Singh,
Amit Sethi
Abstract:
Traditional survey methods for finding surface resistivity are time-consuming and labor intensive. Very few studies have focused on finding the resistivity/conductivity using remote sensing data and deep learning techniques. In this line of work, we assessed the correlation between surface resistivity and Synthetic Aperture Radar (SAR) by applying various deep learning methods and tested our hypot…
▽ More
Traditional survey methods for finding surface resistivity are time-consuming and labor intensive. Very few studies have focused on finding the resistivity/conductivity using remote sensing data and deep learning techniques. In this line of work, we assessed the correlation between surface resistivity and Synthetic Aperture Radar (SAR) by applying various deep learning methods and tested our hypothesis in the Coso Geothermal Area, USA. For detecting the resistivity, L-band full polarimetric SAR data acquired by UAVSAR were used, and MT (Magnetotellurics) inverted resistivity data of the area were used as the ground truth. We conducted experiments to compare various deep learning architectures and suggest the use of Dual Input UNet (DI-UNet) architecture. DI-UNet uses a deep learning architecture to predict the resistivity using full polarimetric SAR data by promising a quick survey addition to the traditional method. Our proposed approach accomplished improved outcomes for the map** of MT resistivity from SAR data.
△ Less
Submitted 5 July, 2022;
originally announced July 2022.
-
A simulation-free seismic survey design by maximizing the spectral gap
Authors:
Yijun Zhang,
Mathias Louboutin,
Ali Siahkoohi,
Ziyi Yin,
Rajiv Kumar,
Felix J. Herrmann
Abstract:
Due to the tremendous cost of seismic data acquisition, methods have been developed to reduce the amount of data acquired by designing optimal missing trace reconstruction algorithms. These technologies are designed to record as little data as possible in the field, while providing accurate wavefield reconstruction in the areas of the survey that are not recorded. This is achieved by designing ran…
▽ More
Due to the tremendous cost of seismic data acquisition, methods have been developed to reduce the amount of data acquired by designing optimal missing trace reconstruction algorithms. These technologies are designed to record as little data as possible in the field, while providing accurate wavefield reconstruction in the areas of the survey that are not recorded. This is achieved by designing randomized subsampling masks that allow for accurate wavefield reconstruction via matrix completion methods. Motivated by these recent results, we propose a simulation-free seismic survey design that aims at improving the quality of a given randomized subsampling using a simulated annealing algorithm that iteratively increases the spectral gap of the subsampling mask, a property recently linked to the quality of the reconstruction. We demonstrate that our proposed method improves the data reconstruction quality for a fixed subsampling rate on a realistic synthetic dataset.
△ Less
Submitted 5 April, 2022;
originally announced April 2022.
-
Imaging graphene moiré superlattices via scanning Kelvin probe microscopy
Authors:
Junxi Yu,
Rajiv Giridharagopal,
Yuhao Li,
Kaichen Xie,
Jiangyu Li,
Ting Cao,
Xiaodong Xu,
David S. Ginger
Abstract:
Moiré superlattices in van der Waals heterostructures are gaining increasing attention because they offer new opportunities to tailor and explore unique electronic phenomena when stacking 2D materials with small twist angles. Here, we reveal local surface potentials associated with stacking domains in twisted double bilayer graphene (TDBG) moiré superlattices. Using a combination of both lateral P…
▽ More
Moiré superlattices in van der Waals heterostructures are gaining increasing attention because they offer new opportunities to tailor and explore unique electronic phenomena when stacking 2D materials with small twist angles. Here, we reveal local surface potentials associated with stacking domains in twisted double bilayer graphene (TDBG) moiré superlattices. Using a combination of both lateral Piezoresponse Force Microscopy (LPFM) and Scanning Kelvin Probe Microscopy (SKPM), we distinguish between Bernal (ABAB) and rhombohedral (ABCA) stacked graphene and directly correlate these stacking configurations with local surface potential. We find that the surface potential of the ABCA domains is ~15 mV higher (smaller work function) than that of the ABAB domains. First-principles calculations based on density functional theory further show that the different work functions between ABCA and ABAB domains arise from the stacking dependent electronic structure. We show that, while the moiré superlattice visualized by LPFM can change with time, imaging the surface potential distribution via SKPM appears more stable, enabling the map** of ABAB and ABCA domains without tip-sample contact-induced effects. Our results provide a new means to visualize and probe local domain stacking in moiré superlattices along with its impact on electronic properties.
△ Less
Submitted 17 February, 2021;
originally announced February 2021.
-
Computational framework for polymer synthesis to study dielectric properties using polarizable reactive molecular dynamics
Authors:
Ankit Mishra,
Lihua Chen,
ZongZe Li,
Ken-ichi Nomura,
Aravind Krishnamoorthy,
Shogo Fukushima,
Subodh C. Tiwari,
Rajiv K. Kalia,
Aiichiro Nakano,
Rampi Ramprasad,
Greg Sotzing,
Yang Cao,
Fuyuki Shimojo,
Priya Vashishta
Abstract:
The increased energy and power density required in modern electronics poses a challenge for designing new dielectric polymer materials with high energy density while maintaining low loss at high applied electric fields. Recently, an advanced computational screening method coupled with hierarchical modelling has accelerated the identification of promising high energy density materials. It is well k…
▽ More
The increased energy and power density required in modern electronics poses a challenge for designing new dielectric polymer materials with high energy density while maintaining low loss at high applied electric fields. Recently, an advanced computational screening method coupled with hierarchical modelling has accelerated the identification of promising high energy density materials. It is well known that the dielectric response of polymeric materials is largely influenced by their phases and local heterogeneous structures as well as operational temperature. Such inputs are crucial to accelerate the design and discovery of potential polymer candidates. However, an efficient computational framework to probe temperature dependence of the dielectric properties of polymers, while incorporating effects controlled by their morphology is still lacking. In this paper, we propose a scalable computational framework based on reactive molecular dynamics with a valence-state aware polarizable charge model, which is capable of handling practically relevant polymer morphologies and simultaneously provide near-quantum accuracy in estimating dielectric properties of various polymer systems. We demonstrate the predictive power of our framework on high energy density polymer systems recently identified through rational experimental-theoretical co-design. Our scalable and automated framework may be used for high-throughput theoretical screenings of combinatorial large design space to identify next-generation high energy density polymer materials.
△ Less
Submitted 18 November, 2020;
originally announced November 2020.
-
Physics-informed Neural-Network Software for Molecular Dynamics Applications
Authors:
Taufeq Mohammed Razakh,
Beibei Wang,
Shane Jackson,
Rajiv K. Kalia,
Aiichiro Nakano,
Ken-ichi Nomura,
Priya Vashishta
Abstract:
We have developed a novel differential equation solver software called PND based on the physics-informed neural network for molecular dynamics simulators. Based on automatic differentiation technique provided by Pytorch, our software allows users to flexibly implement equation of atom motions, initial and boundary conditions, and conservation laws as loss function to train the network. PND comes w…
▽ More
We have developed a novel differential equation solver software called PND based on the physics-informed neural network for molecular dynamics simulators. Based on automatic differentiation technique provided by Pytorch, our software allows users to flexibly implement equation of atom motions, initial and boundary conditions, and conservation laws as loss function to train the network. PND comes with a parallel molecular dynamics (MD) engine in order for users to examine and optimize loss function design, and different conservation laws and boundary conditions, and hyperparameters, thereby accelerate the PINN-based development for molecular applications.
△ Less
Submitted 21 November, 2020; v1 submitted 6 November, 2020;
originally announced November 2020.
-
Lattice Thermal Transport in Two-Dimensional Alloys and Fractal Heterostructures
Authors:
Aravind Krishnamoorthy,
Nitish Baradwaj,
Aiichiro Nakano,
Rajiv K. Kalia,
Priya Vashishta
Abstract:
Engineering thermal transport in two dimensional materials, alloys and heterostructures is critical for the design of next-generation flexible optoelectronic and energy harvesting devices. Direct experimental characterization of lattice thermal conductivity in these ultra-thin systems is challenging and the impact of dopant atoms and hetero-phase interfaces, introduced unintentionally during synth…
▽ More
Engineering thermal transport in two dimensional materials, alloys and heterostructures is critical for the design of next-generation flexible optoelectronic and energy harvesting devices. Direct experimental characterization of lattice thermal conductivity in these ultra-thin systems is challenging and the impact of dopant atoms and hetero-phase interfaces, introduced unintentionally during synthesis or as part of deliberate material design, on thermal transport properties is not understood. Here, we use non-equilibrium molecular dynamics simulations to calculate lattice thermal conductivity of (Mo|W)Se$_2$ monolayer crystals including Mo$_{1-x}$W$_x$Se$_2$ alloys with substitutional point defects, periodic MoSe$_2$|WSe$_2$ heterostructures with characteristic length scales and scale-free fractal MoSe$_2$|WSe$_2$ heterostructures. Each of these features has a distinct effect on phonon propagation in the crystal, which can be used to design fractal and periodic alloy structures with highly tunable thermal conductivities. This control over lattice thermal conductivity will enable applications ranging from thermal barriers to thermoelectrics.
△ Less
Submitted 30 September, 2020;
originally announced September 2020.
-
EZFF: Python Library for Multi-Objective Parameterization and Uncertainty Quantification of Interatomic Forcefields for Molecular Dynamics
Authors:
Aravind Krishnamoorthy,
Ankit Mishra,
Deepak Kamal,
Sungwook Hong,
Ken-ichi Nomura,
Subodh Tiwari,
Aiichiro Nakano,
Rajiv Kalia,
Rampi Ramprasad,
Priya Vashishta
Abstract:
Parameterization of interatomic forcefields is a necessary first step in performing molecular dynamics simulations. This is a non-trivial global optimization problem involving quantification of multiple empirical variables against one or more properties. We present EZFF, a lightweight Python library for parameterization of several types of interatomic forcefields implemented in several molecular d…
▽ More
Parameterization of interatomic forcefields is a necessary first step in performing molecular dynamics simulations. This is a non-trivial global optimization problem involving quantification of multiple empirical variables against one or more properties. We present EZFF, a lightweight Python library for parameterization of several types of interatomic forcefields implemented in several molecular dynamics engines against multiple objectives using genetic-algorithm-based global optimization methods. The EZFF scheme provides unique functionality such as the parameterization of hybrid forcefields composed of multiple forcefield interactions as well as built-in quantification of uncertainty in forcefield parameters and can be easily extended to other forcefield functional forms as well as MD engines.
△ Less
Submitted 30 September, 2020;
originally announced September 2020.
-
Predictive Synthesis of Quantum Materials by Probabilistic Reinforcement Learning
Authors:
Pankaj Rajak,
Aravind Krishnamoorthy,
Ankit Mishra,
Rajiv K. Kalia,
Aiichiro Nakano,
Priya Vashishta
Abstract:
Predictive materials synthesis is the primary bottleneck in realizing new functional and quantum materials. Strategies for synthesis of promising materials are currently identified by time-consuming trial and error approaches and there are no known predictive schemes to design synthesis parameters for new materials. We use reinforcement learning to predict optimal synthesis schedules, i.e. a time-…
▽ More
Predictive materials synthesis is the primary bottleneck in realizing new functional and quantum materials. Strategies for synthesis of promising materials are currently identified by time-consuming trial and error approaches and there are no known predictive schemes to design synthesis parameters for new materials. We use reinforcement learning to predict optimal synthesis schedules, i.e. a time-sequence of reaction conditions like temperatures and reactant concentrations, for the synthesis of a prototypical quantum material, semiconducting monolayer MoS$_{2}$, using chemical vapor deposition. The predictive reinforcement leaning agent is coupled to a deep generative model to capture the crystallinity and phase-composition of synthesized MoS$_{2}$ during CVD synthesis as a function of time-dependent synthesis conditions. This model, trained on 10000 computational synthesis simulations, successfully learned threshold temperatures and chemical potentials for the onset of chemical reactions and predicted new synthesis schedules for producing well-sulfidized crystalline and phase-pure MoS$_{2}$, which were validated by computational synthesis simulations. The model can be extended to predict profiles for synthesis of complex structures including multi-phase heterostructures and can also predict long-time behavior of reacting systems, far beyond the domain of the MD simulations used to train the model, making these predictions directly relevant to experimental synthesis.
△ Less
Submitted 14 September, 2020;
originally announced September 2020.
-
Measuring Cognitive Abilities in the Wild: Validating a Population-Scale Game-Based Cognitive Assessment
Authors:
Mads Kock Pedersen,
Carlos Mauricio Castaño Díaz,
Qian Janice Wang,
Mario Alejandro Alba-Marrugo,
Ali Amidi,
Rajiv Vaid Basaiawmoit,
Carsten Bergenholtz,
Morten H. Christiansen,
Miroslav Gajdacz,
Ralph Hertwig,
Byurakn Ishkhanyan,
Kim Klyver,
Nicolai Ladegaard,
Kim Mathiasen,
Christine Parsons,
Janet Rafner,
Anders Ryom Villadsen,
Mikkel Wallentin,
Blanka Zana,
Jacob Friis Sherson
Abstract:
Rapid individual cognitive phenoty** holds the potential to revolutionize domains as wide-ranging as personalized learning, employment practices, and precision psychiatry. Going beyond limitations imposed by traditional lab-based experiments, new efforts have been underway towards greater ecological validity and participant diversity to capture the full range of individual differences in cogniti…
▽ More
Rapid individual cognitive phenoty** holds the potential to revolutionize domains as wide-ranging as personalized learning, employment practices, and precision psychiatry. Going beyond limitations imposed by traditional lab-based experiments, new efforts have been underway towards greater ecological validity and participant diversity to capture the full range of individual differences in cognitive abilities and behaviors across the general population. Building on this, we developed Skill Lab, a novel game-based tool that simultaneously assesses a broad suite of cognitive abilities while providing an engaging narrative. Skill Lab consists of six mini-games as well as 14 established cognitive ability tasks. Using a popular citizen science platform (N = 10725), we conducted a comprehensive validation in the wild of a game-based cognitive assessment suite. Based on the game and validation task data, we constructed reliable models to simultaneously predict eight cognitive abilities based on the users' in-game behavior. Follow-'-up validation tests revealed that the models can discriminate nuances contained within each separate cognitive ability as well as capture a shared main factor of generalized cognitive ability. Our game-based measures are five times faster to complete than the equivalent task-based measures and replicate previous findings on the decline of certain cognitive abilities with age in our large cross-sectional population sample (N = 6369). Taken together, our results demonstrate the feasibility of rapid in-the-wild systematic assessment of cognitive abilities as a promising first step towards population-scale benchmarking and individualized mental health diagnostics.
△ Less
Submitted 12 June, 2023; v1 submitted 11 September, 2020;
originally announced September 2020.
-
Sn4+ Precursor Enables 12.4% Efficient Kesterite Solar Cell from DMSO Solution with Open Circuit Voltage Deficit Below 0.30 V
Authors:
Yuancai Gong,
Yifan Zhang,
Erin Jedlicka,
Rajiv Giridharagopal,
James A. Clark,
Weibo Yan,
Chuanyou Niu,
Ruichan Qiu,
**g**g Jiang,
Shaotang Yu,
San** Wu,
Hugh W. Hillhouse,
David S. Ginger,
Wei Huang,
Hao Xin
Abstract:
The limiting factor preventing kesterite (CZTSSe) thin film solar cell performance further improvement is the large open-circuit voltage deficit (Voc,def) issue, which is 0.345V for the current world record device with an efficiency of 12.6%. In this work, SnCl4 and SnCl2_2H2O are respectively used as tin precursor to investigate the Voc,def issue of dimethyl sulfoxide (DMSO) solution processed CZ…
▽ More
The limiting factor preventing kesterite (CZTSSe) thin film solar cell performance further improvement is the large open-circuit voltage deficit (Voc,def) issue, which is 0.345V for the current world record device with an efficiency of 12.6%. In this work, SnCl4 and SnCl2_2H2O are respectively used as tin precursor to investigate the Voc,def issue of dimethyl sulfoxide (DMSO) solution processed CZTSSe solar cells. Different complexations of tin compounds with thiourea and DMSO lead to different reaction pathways from solution to absorber material and thus dramatic difference in photovoltaic performance. The coordination of Sn2+ with Tu leads to the formation of SnS and ZnS and Cu2S in the precursor film, which converted to selenides first and then fused to CZTSSe, resulting in poor film quality and device performance. The highest efficiency obtained from this film is 8.84% with a Voc,def of 0.391V. The coordination of Sn4+ with DMSO facilitates direct formation ofkesterite CZTS phase in the precursor film which directed converted to CZTSSe during selenization, resulting in compositional uniform absorber and high device performance. A device with active area efficiency 12.2% and a Voc,def of 0.344 V was achieved from Sn4+ solution processed absorber. Furthermore, CZTSSe/CdS heterojunction heat treatment (JHT) significantly improved Sn4+ device performance but had slightly negative effect on Sn2+ device. A champion CZTSSe solar cell with a total area efficiency of 12.4% (active are efficiency 13.6%) and low Voc,def of 0.297 V was achieved from Sn4+ solution. Our results demonstrate the preformed uniform kesterite phase enabled by Sn4+ precursor is the key in achieving highly efficient kesterite absorber material. The lowest Voc-def and high efficiency achieved here shines new light on the future of kesterite solar cell.
△ Less
Submitted 22 May, 2020;
originally announced May 2020.
-
Longitudinal laboratory testing tied to PCR diagnostics in COVID-19 patients reveals temporal evolution of distinctive coagulopathy signatures
Authors:
Colin Pawlowski,
Tyler Wagner,
Arjun Puranik,
Karthik Murugadoss,
Liam Loscalzo,
AJ Venkatakrishnan,
Rajiv K. Pruthi,
Damon E. Houghton,
John C. OHoro,
William G. Morice II,
John Halamka,
Andrew D. Badley,
Elliot S. Barnathan,
Hideo Makimura,
Najat Khan,
Venky Soundararajan
Abstract:
Temporal inference from laboratory testing results and their triangulation with clinical outcomes as described in the associated unstructured text from the providers notes in the Electronic Health Record (EHR) is integral to advancing precision medicine. Here, we studied 181 COVIDpos and 7,775 COVIDneg patients subjected to 1.3 million laboratory tests across 194 assays during a two-month observat…
▽ More
Temporal inference from laboratory testing results and their triangulation with clinical outcomes as described in the associated unstructured text from the providers notes in the Electronic Health Record (EHR) is integral to advancing precision medicine. Here, we studied 181 COVIDpos and 7,775 COVIDneg patients subjected to 1.3 million laboratory tests across 194 assays during a two-month observation period centered around their SARS-CoV-2 PCR testing dates. We found that compared to COVIDneg at the time of clinical presentation and diagnostic testing, COVIDpos patients tended to have higher plasma fibrinogen levels and similarly low platelet counts, with approximately 25% of patients in both cohorts showing outright thrombocytopenia. However, these measures show opposite longitudinal trends as the infection evolves, with declining fibrinogen and increasing platelet counts to levels that are lower and higher compared to the COVIDneg cohort, respectively. Our EHR augmented curation efforts suggest a minority of patients develop thromboembolic events after the PCR testing date, including rare cases with disseminated intravascular coagulopathy (DIC), with most patients lacking the platelet reductions typically observed in consumptive coagulopathies. These temporal trends present, for the first time, fine-grained resolution of COVID-19 associated coagulopathy (CAC), via a digital framework that synthesizes longitudinal lab measurements with structured medication data and neural network-powered extraction of outcomes from the unstructured EHR. This study demonstrates how a precision medicine platform can help contextualize each patients specific coagulation profile over time, towards the goal of informing better personalization of thromboprophylaxis regimen.
△ Less
Submitted 21 May, 2020;
originally announced May 2020.
-
Domain-Specific Compilers for Dynamic Simulations of Quantum Materials on Quantum Computers
Authors:
Lindsay Bassman,
Sahil Gulania,
Connor Powers,
Rongpeng Li,
Thomas Linker,
Kuang Liu,
T. K. Satish Kumar,
Rajiv K. Kalia,
Aiichiro Nakano,
Priya Vashishta
Abstract:
Simulation of the dynamics of quantum materials is emerging as a promising scientific application for noisy intermediate-scale quantum (NISQ) computers. Due to their high gate-error rates and short decoherence times, however, NISQ computers can only produce high-fidelity results for those quantum circuits smaller than some given circuit size. Dynamic simulations, therefore, pose a challenge as cur…
▽ More
Simulation of the dynamics of quantum materials is emerging as a promising scientific application for noisy intermediate-scale quantum (NISQ) computers. Due to their high gate-error rates and short decoherence times, however, NISQ computers can only produce high-fidelity results for those quantum circuits smaller than some given circuit size. Dynamic simulations, therefore, pose a challenge as current algorithms produce circuits that grow in size with each subsequent time-step of the simulation. This underscores the crucial role of quantum circuit compilers to produce executable quantum circuits of minimal size, thereby maximizing the range of physical phenomena that can be studied within the NISQ fidelity budget. Here, we present two domain-specific quantum circuit compilers for the Rigetti and IBM quantum computers, specifically designed to compile circuits simulating dynamics under a special class of time-dependent Hamiltonians. The compilers outperform state-of-the-art general-purpose compilers in terms of circuit size reduction by around 25-30% as well as wall-clock compilation time by around 40% (dependent on system size and simulation time-step). Drawing on heuristic techniques commonly used in artificial intelligence, both compilers scale well with simulation time-step and system size. Code for both compilers is included to enhance the results of dynamic simulations for future researchers. We anticipate that our domain-specific compilers will enable dynamic simulations of quantum materials on near-future NISQ computers that would not otherwise be possible with general-purpose compilers.
△ Less
Submitted 15 April, 2020;
originally announced April 2020.
-
Adiabatic Mode Transformation in Width-graded Nano-gratings: Enabling Multiwavelength Light Localization
Authors:
Moein Shayegannia,
Arthur O Montazeri,
Katelyn Dixon,
Rajiv Prinja,
Nastaran Kazemi-Zanjani,
Nazir P Kherani
Abstract:
We delineate the four principal surface plasmon polariton coupling and interaction mechanisms in subwavelength gratings, and demonstrate their significant roles in sha** the optical response of plasmonic gratings. Within the framework of width-graded metal-insulator-metal nano-gratings, mode confinement and wave guiding result in multiwavelength light localization provided conditions of adiabati…
▽ More
We delineate the four principal surface plasmon polariton coupling and interaction mechanisms in subwavelength gratings, and demonstrate their significant roles in sha** the optical response of plasmonic gratings. Within the framework of width-graded metal-insulator-metal nano-gratings, mode confinement and wave guiding result in multiwavelength light localization provided conditions of adiabatic mode transformation are satisfied. The field is enhanced further through fine tuning of the groove-width (w), groove-depth (L) and groove-to-groove-separation (d). By juxtaposing the resonance modes of width-graded and non-graded gratings and defining the adiabaticity condition, we demonstrate the criticality of w and d in achieving adiabatic mode transformation among the grooves. We observe that the resonant wavelength of a graded grating corresponds to the properties of a single groove when the grooves are adiabatically coupled. We show that L plays an important function in defining the span of localized wavelengths. We show that multiwavelength resonant modes with intensity enhancement exceeding 3 orders of magnitude are possible with w < 30nm and 300nm < d < 900nm for a range of fixed values of L. This study presents a novel paradigm of deep-subwavelength adiabatically-coupled width-graded gratings - illustrating its versatility in design, hence its viability for applications ranging from surface enhanced Raman spectroscopy to multispectral imaging.
△ Less
Submitted 13 April, 2020;
originally announced April 2020.
-
Unprecedented confinement time of electron plasmas with a purely toroidal magnetic field in SMARTEX-C
Authors:
Lavkesh Lachhvani,
Sambaran Pahari,
Rajiv Goswami,
Yogesh G. Yeole,
Prabal K. Chattopadhyay
Abstract:
Confinement time of electron plasmas trapped using a purely toroidal magnetic field has been extended to $\sim 100$ s in a small aspect ratio ($R_{o}/{a} \sim {1.59}$, $R_o$ and $a$ are device major and minor radius, respectively), partial torus. It surpasses the previous record by nearly two orders of magnitude. Lifetime is estimated from the frequency scaling of the linear diocotron mode launche…
▽ More
Confinement time of electron plasmas trapped using a purely toroidal magnetic field has been extended to $\sim 100$ s in a small aspect ratio ($R_{o}/{a} \sim {1.59}$, $R_o$ and $a$ are device major and minor radius, respectively), partial torus. It surpasses the previous record by nearly two orders of magnitude. Lifetime is estimated from the frequency scaling of the linear diocotron mode launched from sections of the wall, that are also used for mode diagnostics. Confinement improves enormously with reduction in neutral pressure in the presence of a steady state magnetic field. In addition, confinement is seen to be independent of the magnetic field, a distinguishing feature of Magnetic Pum** Transport (MPT) theory. Since MPT predicts an upper limit to confinement comparisons have been made between our experiments and MPT estimates.
△ Less
Submitted 18 February, 2020; v1 submitted 13 February, 2020;
originally announced February 2020.
-
Spectroscopic Evaluation of Charge-transfer Do** and Strain in Graphene/MoS2 Heterostructures
Authors:
Rahul Rao,
Ahmad E. Islam,
Simranjeet Singh,
Rajiv Berry,
Roland K Kawakami,
Benji Maruyama,
Jyoti Katoch
Abstract:
It is important to study the van der Waals interface in emerging vertical heterostructures based on layered two-dimensional (2D) materials. Being atomically thin, 2D materials are susceptible to significant strains as well as charge transfer do** across the interfaces. Here we use Raman and photoluminescence (PL) spectroscopy to study the interface between monolayer graphene/MoS2 heterostructure…
▽ More
It is important to study the van der Waals interface in emerging vertical heterostructures based on layered two-dimensional (2D) materials. Being atomically thin, 2D materials are susceptible to significant strains as well as charge transfer do** across the interfaces. Here we use Raman and photoluminescence (PL) spectroscopy to study the interface between monolayer graphene/MoS2 heterostructures prepared by mechanical exfoliation and layer-by-layer transfer. By using correlation analysis between the Raman modes of graphene and MoS2 we show that both layers are subjected to compressive strain and charge transfer do** following mechanical exfoliation and thermal annealing. Furthermore, we show that both strain and carrier concentration can be modulated in the heterostructures with additional thermal annealing. Our study highlights the importance of considering both mechanical and electronic coupling when characterizing the interface in van der Waals heterostructures, and demonstrates a method to tune their electromechanical properties.
△ Less
Submitted 10 May, 2019; v1 submitted 2 May, 2019;
originally announced May 2019.
-
Photonic crystal nanobeam cavities with optical resonances around 800 nm
Authors:
Ivens Saber,
Rajiv Boddeda,
Fabrice Raineri,
Dorian Sanchez,
Gregoire Beaudoin,
Isabelle Sagnes,
Quentin Glorieux,
Alberto Bramati,
Juan Ariel Levenson,
Kamel Bencheikh
Abstract:
We report on the design and the fabrication of 1D photonic crystal (PhC) nanobeam cavities with optical resonances around 800 nm, compatible with Rubidium, Cesium or Argon atomic transitions. The cavities are made of Indium Gallium Phosphide (InGaP) material, a III-V semi-conductor compound which has a large index of refraction ($n \simeq 3.3$) favoring strong optical confinement and small mode vo…
▽ More
We report on the design and the fabrication of 1D photonic crystal (PhC) nanobeam cavities with optical resonances around 800 nm, compatible with Rubidium, Cesium or Argon atomic transitions. The cavities are made of Indium Gallium Phosphide (InGaP) material, a III-V semi-conductor compound which has a large index of refraction ($n \simeq 3.3$) favoring strong optical confinement and small mode volumes. Nanobeam cavities with inline and side coupling have been designed and fabricated, and quality factors up to $2\times 10^4$ have been measured.
△ Less
Submitted 12 March, 2019;
originally announced March 2019.
-
Basis Pursuit Denoise with Nonsmooth Constraints
Authors:
Robert Baraldi,
Rajiv Kumar,
Aleksandr Aravkin
Abstract:
Level-set optimization formulations with data-driven constraints minimize a regularization functional subject to matching observations to a given error level. These formulations are widely used, particularly for matrix completion and sparsity promotion in data interpolation and denoising. The misfit level is typically measured in the l2 norm, or other smooth metrics. In this paper, we present a ne…
▽ More
Level-set optimization formulations with data-driven constraints minimize a regularization functional subject to matching observations to a given error level. These formulations are widely used, particularly for matrix completion and sparsity promotion in data interpolation and denoising. The misfit level is typically measured in the l2 norm, or other smooth metrics. In this paper, we present a new flexible algorithmic framework that targets nonsmooth level-set constraints, including L1, Linf, and even L0 norms. These constraints give greater flexibility for modeling deviations in observation and denoising, and have significant impact on the solution. Measuring error in the L1 and L0 norms makes the result more robust to large outliers, while matching many observations exactly. We demonstrate the approach for basis pursuit denoise (BPDN) problems as well as for extensions of BPDN to matrix factorization, with applications to interpolation and denoising of 5D seismic data. The new methods are particularly promising for seismic applications, where the amplitude in the data varies significantly, and measurement noise in low-amplitude regions can wreak havoc for standard Gaussian error models.
△ Less
Submitted 28 November, 2018;
originally announced November 2018.
-
Relaxation algorithms for matrix completion, with applications to seismic travel-time data interpolation
Authors:
Robert Baraldi,
Carl Ulberg,
Rajiv Kumar,
Kenneth Creager,
Aleksandr Aravkin
Abstract:
Travel time tomography is used to infer the underlying three-dimensional wavespeed structure of the Earth by fitting seismic travel time data collected at surface stations. Data interpolation and denoising techniques are important pre-processing steps that use prior knowledge about the data, including parsimony in the frequency and wavelet domains, low-rank structure of matricizations, and local s…
▽ More
Travel time tomography is used to infer the underlying three-dimensional wavespeed structure of the Earth by fitting seismic travel time data collected at surface stations. Data interpolation and denoising techniques are important pre-processing steps that use prior knowledge about the data, including parsimony in the frequency and wavelet domains, low-rank structure of matricizations, and local smoothness.
We show how local smoothness structure can be combined with low rank constraints using level-set optimization formulations, and develop a new relaxation algorithm that can efficiently solve these joint problems. In the seismology setting, we use the approach to interpolate missing stations and de-noise observed stations. The new approach is competitive with alternative algorithms, and offers new functionality to interpolate observed data using both smoothness and low rank structure in the presence of data fitting constraints.
△ Less
Submitted 23 August, 2018; v1 submitted 13 August, 2018;
originally announced August 2018.
-
A time-delay model for molecular gas flow into vacuum
Authors:
Rajiv Goswami,
K. A. Jadeja
Abstract:
Flow of molecular gas into a complex vacuum system is investigated by a lumped parameter model to estimate the time evolution of gas pressure $p_g$, which for the first time takes into account the realistic effect of time-delay arising due to multiple reasons such as valve response, pum** and transport of gas, conductance of the pipe network, etc. The net effect of all such delays taken together…
▽ More
Flow of molecular gas into a complex vacuum system is investigated by a lumped parameter model to estimate the time evolution of gas pressure $p_g$, which for the first time takes into account the realistic effect of time-delay arising due to multiple reasons such as valve response, pum** and transport of gas, conductance of the pipe network, etc. The net effect of all such delays taken together into a single (constant) delay term gives rise to a scalar delay differential equation (DDE). Analytical solutions of a linear DDE in presence of external forcing due to the (pulsed) injection of gas and outgassing from a stainless steel (SS) wall are then derived using the Laplace transform method, where the transcendental characteristic equation is approximated by means of rational transfer functions such as diagonal Pad{é} approximation. A good agreement is obtained with the numerical results and it is shown from these solutions that a reasonably good match with experimental results is obtained only in the presence of a nonzero time-delay. An attempt is also made to simplify the DDE into an ordinary differential equation (ODE) by using a low-order Taylor series expansion of the time-delay term. A singular perturbation method is used to solve the resultant initial value problem (IVP) type second-order ODE. It is found that unlike the Laplace transform method, the ODE closely approximates the DDE only if the delay is small. Emergence of stable periodic oscillations in $p_g$, as a generic supercritical Hopf bifurcation, if time-delay exceeds a critical value is then established by numerical and Poincar{é}-Lindstedt method.
△ Less
Submitted 21 May, 2018;
originally announced June 2018.
-
Simultaneous shot inversion for nonuniform geometries using fast data interpolation
Authors:
Michelle Liu,
Rajiv Kumar,
Eldad Haber,
Aleksandr Aravkin
Abstract:
Stochastic optimization is key to efficient inversion in PDE-constrained optimization. Using 'simultaneous shots', or random superposition of source terms, works very well in simple acquisition geometries where all sources see all receivers, but this rarely occurs in practice. We develop an approach that interpolates data to an ideal acquisition geometry while solving the inverse problem using sim…
▽ More
Stochastic optimization is key to efficient inversion in PDE-constrained optimization. Using 'simultaneous shots', or random superposition of source terms, works very well in simple acquisition geometries where all sources see all receivers, but this rarely occurs in practice. We develop an approach that interpolates data to an ideal acquisition geometry while solving the inverse problem using simultaneous shots. The approach is formulated as a joint inverse problem, combining ideas from low-rank interpolation with full-waveform inversion. Results using synthetic experiments illustrate the flexibility and efficiency of the approach.
△ Less
Submitted 23 April, 2018;
originally announced April 2018.
-
Numerical investigation of transient, low-power metal vapour discharges occurring in near limit ignitions of flammable gas
Authors:
Rajiv Shekhar,
Sergey Gortschakow,
Holger Grosshans,
Udo Gerlach,
Dirk Uhrlandt
Abstract:
This article presents an investigation of a transient (30 μs - 5 ms) electrical discharge in metal vapour with low voltage (< 50 V) and current (< 1 A), drawn between two separating electrodes. Discharges of this type are rarely studied, but are important in electrical explosion safety, as they can ignite flammable gasses. An empirical model is developed based on transient recordings of discharge…
▽ More
This article presents an investigation of a transient (30 μs - 5 ms) electrical discharge in metal vapour with low voltage (< 50 V) and current (< 1 A), drawn between two separating electrodes. Discharges of this type are rarely studied, but are important in electrical explosion safety, as they can ignite flammable gasses. An empirical model is developed based on transient recordings of discharge voltages and currents and high speed broadband image data. The model is used for predicting the electrical waveforms and spatial power distribution of the discharge. The predicted electrical waveforms show good accuracy under various scenarios. To further investigate the underlying physics, the model is then incorporated into a simplified 3-D gas dynamics simulation including molecular diffusion, heat transfer and evaporation of metal from the electrode surface. The local thermodynamic equilibrium (LTE) assumption is next used to calculate electrical conductivity from the simulated temperature fields, which in turn is integrated to produce electrical resistance over time. This resistance is then compared to that implied by the voltage and current waveforms predicted by the empirical model. The comparison shows a significant discrepancy, yielding the important insight that the studied discharge very likely deviates strongly from LTE.
△ Less
Submitted 23 February, 2018; v1 submitted 25 January, 2018;
originally announced January 2018.
-
Leaderboard Effects on Player Performance in a Citizen Science Game
Authors:
Mads Kock Pedersen,
Nanna Ravn Rasmussen,
Jacob F. Sherson,
Rajiv Vaid Basaiawmoit
Abstract:
Quantum Moves is a citizen science game that investigates the ability of humans to solve complex physics challenges that are intractable for computers. During the launch of Quantum Moves in April 2016 the game's leaderboard function broke down resulting in a "no leaderboard" game experience for some players for a couple of days (though their scores were still displayed). The subsequent quick fix o…
▽ More
Quantum Moves is a citizen science game that investigates the ability of humans to solve complex physics challenges that are intractable for computers. During the launch of Quantum Moves in April 2016 the game's leaderboard function broke down resulting in a "no leaderboard" game experience for some players for a couple of days (though their scores were still displayed). The subsequent quick fix of an all-time Top 5 leaderboard, and the following long-term implementation of a personalized relative-position (infinite) leaderboard provided us with a unique opportunity to compare and investigate the effect of different leaderboard implementations on player performance in a points-driven citizen science game.
All three conditions were live sequentially during the game's initial influx of more than 150.000 players that stemmed from global press attention on Quantum Moves due the publication of a Nature paper about the use of Quantum Moves in solving a specific quantum physics problem. Thus, it has been possible to compare the three conditions and their influence on the performance (defined as a player's quality of game play related to a high-score) of over 4500 new players. These 4500 odd players in our three leaderboard-conditions have a similar demographic background based upon the time-window over which the implementations occurred and controlled against Player ID tags. Our results placed Condition 1 experience over condition 3 and in some cases even over condition 2 which goes against the general assumption that leaderboards enhance gameplay and its subsequent overuse as a an oft-relied upon element that designers slap onto a game to enhance said appeal. Our study thus questions the use of leaderboards as general performance enhancers in gamification contexts and brings some empirical rigor to an often under-reported but overused phenomenon.
△ Less
Submitted 12 July, 2017;
originally announced July 2017.
-
Rydberg-induced optical nonlinearities from a cold atomic ensemble trapped inside a cavity
Authors:
Rajiv Boddeda,
Imam Usmani,
Erwan Bimbard,
Andrey Grankin,
Alexei Ourjoumtsev,
Etienne Brion,
Philippe Grangier
Abstract:
We experimentally characterize the optical nonlinear response of a cold atomic medium placed inside an optical cavity, and excited to Rydberg states. The excitation to S and D Rydberg levels is carried out via a two-photon transition in an EIT (electromagnetically induced transparency) configuration, with a weak (red) probe beam on the lower transition, and a strong (blue) coupling beam on the upp…
▽ More
We experimentally characterize the optical nonlinear response of a cold atomic medium placed inside an optical cavity, and excited to Rydberg states. The excitation to S and D Rydberg levels is carried out via a two-photon transition in an EIT (electromagnetically induced transparency) configuration, with a weak (red) probe beam on the lower transition, and a strong (blue) coupling beam on the upper transition. The observed optical nonlinearities induced by S states for the probe beam can be explained using a semi-classical model with van der Waals' interactions. For the D states, it appears necessary to take into account a dynamical decay of Rydberg excitations into a long-lived dark state. We show that the measured nonlinearities can be explained by using a Rydberg bubble model with a dynamical decay.
△ Less
Submitted 21 February, 2016; v1 submitted 28 December, 2015;
originally announced December 2015.
-
Quantum optical non-linearities induced by Rydberg-Rydberg interactions: a perturbative approach
Authors:
A. Grankin,
E. Brion,
E. Bimbard,
R. Boddeda,
I. Usmani,
A. Ourjoumtsev,
P. Grangier
Abstract:
In this article, we theoretically study the quantum statistical properties of the light transmitted through or reflected from an optical cavity, filled by an atomic medium with strong optical non-linearity induced by Rydberg-Rydberg van der Waals interactions. Atoms are driven on a two-photon transition from their ground state to a Rydberg level via an intermediate state by the combination of a we…
▽ More
In this article, we theoretically study the quantum statistical properties of the light transmitted through or reflected from an optical cavity, filled by an atomic medium with strong optical non-linearity induced by Rydberg-Rydberg van der Waals interactions. Atoms are driven on a two-photon transition from their ground state to a Rydberg level via an intermediate state by the combination of a weak signal field and a strong control beam. By using a perturbative approach, we get analytic results which remain valid in the regime of weak feeding fields, even when the intermediate state becomes resonant. Therefore they allow us to investigate quantitatively new features associated with the resonant behaviour of the system. We also propose an effective non-linear three-boson model of the system which, in addition to leading to the same analytic results as the original problem, sheds light on the physical processes at work in the system.
△ Less
Submitted 23 February, 2015;
originally announced February 2015.
-
Effect of Organoclay on Compatibilization, Thermal and Mechanical Properties of Polycarbonate/Polystyrene Blends
Authors:
A. K. Singh,
Rajiv Prakash
Abstract:
Pristine and organoclay modified polycarbonate/polystyrene (PC/PS) blends are prepared using melt-mixing technique. These blends are characterized for their morphology, structural, thermal and mechanical properties. Though our FTIR and XRD results show weak interactions between PC and PS phases, however, DSC and morphological study reveals that pristine PC/PS blends are immiscible. On other hand,…
▽ More
Pristine and organoclay modified polycarbonate/polystyrene (PC/PS) blends are prepared using melt-mixing technique. These blends are characterized for their morphology, structural, thermal and mechanical properties. Though our FTIR and XRD results show weak interactions between PC and PS phases, however, DSC and morphological study reveals that pristine PC/PS blends are immiscible. On other hand, introduction of organoclay results compatibilization of two polymer phases which is supported by significant shift in glass transition temperatures of the component phases and a distinct morphology having no phase segregation on sub-micron scale. Intercalation of polymers inside the clay gallery is achieved and is supported by XRD studies. A better thermal stability and higher value of modulus of the compatibilized blends compared to pristine PC/PS blends also support the reinforcement effect of organoclay to the PC/PS blend matrix.
△ Less
Submitted 8 April, 2014;
originally announced April 2014.
-
Homodyne tomography of a single photon retrieved on demand from a cavity-enhanced cold atom memory
Authors:
Erwan Bimbard,
Rajiv Boddeda,
Nicolas Vitrant,
Andrey Grankin,
Valentina Parigi,
Jovica Stanojevic,
Alexei Ourjoumtsev,
Philippe Grangier
Abstract:
We experimentally demonstrate that a non-classical state prepared in an atomic memory can be efficiently transferred to a single mode of free-propagating light. By retrieving on demand a single excitation from a cold atomic gas, we realize an efficient source of single photons prepared in a pure, fully controlled quantum state. We characterize this source using two detection methods, one based on…
▽ More
We experimentally demonstrate that a non-classical state prepared in an atomic memory can be efficiently transferred to a single mode of free-propagating light. By retrieving on demand a single excitation from a cold atomic gas, we realize an efficient source of single photons prepared in a pure, fully controlled quantum state. We characterize this source using two detection methods, one based on photon-counting analysis, and the second using homodyne tomography to reconstruct the density matrix and Wigner function of the state. The latter technique allows us to completely determine the mode of the retrieved photon in its fine phase and amplitude details, and demonstrate its nonclassical field statistics by observing a negative Wigner function. We measure a photon retrieval efficiency up to 82% and an atomic memory coherence time of 900 ns. This setup is very well suited to study interactions between atomic excitations, and to use them in order to create and manipulate more sophisticated quantum states of light with a high degree of experimental control.
△ Less
Submitted 24 February, 2014; v1 submitted 4 October, 2013;
originally announced October 2013.
-
DNA Sequencing via Quantum Mechanics and Machine Learning
Authors:
Henry Yuen,
Fuyuki Shimojo,
Kevin J. Zhang,
Ken-ichi Nomura,
Rajiv K. Kalia,
Aiichiro Nakano,
Priya Vashishta
Abstract:
Rapid sequencing of individual human genome is prerequisite to genomic medicine, where diseases will be prevented by preemptive cures. Quantum-mechanical tunneling through single-stranded DNA in a solid-state nanopore has been proposed for rapid DNA sequencing, but unfortunately the tunneling current alone cannot distinguish the four nucleotides due to large fluctuations in molecular conformation…
▽ More
Rapid sequencing of individual human genome is prerequisite to genomic medicine, where diseases will be prevented by preemptive cures. Quantum-mechanical tunneling through single-stranded DNA in a solid-state nanopore has been proposed for rapid DNA sequencing, but unfortunately the tunneling current alone cannot distinguish the four nucleotides due to large fluctuations in molecular conformation and solvent. Here, we propose a machine-learning approach applied to the tunneling current-voltage (I-V) characteristic for efficient discrimination between the four nucleotides. We first combine principal component analysis (PCA) and fuzzy c-means (FCM) clustering to learn the "fingerprints" of the electronic density-of-states (DOS) of the four nucleotides, which can be derived from the I-V data. We then apply the hidden Markov model and the Viterbi algorithm to sequence a time series of DOS data (i.e., to solve the sequencing problem). Numerical experiments show that the PCA-FCM approach can classify unlabeled DOS data with 91% accuracy. Furthermore, the classification is found to be robust against moderate levels of noise, i.e., 70% accuracy is retained with a signal-to-noise ratio of 26 dB. The PCA-FCM-Viterbi approach provides a 4-fold increase in accuracy for the sequencing problem compared with PCA alone. In conjunction with recent developments in nanotechnology, this machine-learning method may pave the way to the much-awaited rapid, low-cost genome sequencer.
△ Less
Submitted 4 December, 2010;
originally announced December 2010.
-
Evaluating force field accuracy with long-time simulations of a tryptophan zipper peptide
Authors:
Natha R. Hayre,
Rajiv R. P. Singh,
Daniel L. Cox
Abstract:
We have combined a custom implementation of the fast multiple-time-step** LN integrator with parallel tempering to explore folding properties of small peptides in implicit solvent on the time scale of microseconds. We applied this algorithm to the synthetic β-hairpin trpzip2 and one of its sequence variants W2W9. Each simulation consisted of over 12 μs of aggregated virtual time. Several measure…
▽ More
We have combined a custom implementation of the fast multiple-time-step** LN integrator with parallel tempering to explore folding properties of small peptides in implicit solvent on the time scale of microseconds. We applied this algorithm to the synthetic β-hairpin trpzip2 and one of its sequence variants W2W9. Each simulation consisted of over 12 μs of aggregated virtual time. Several measures of folding behavior showed convergence, allowing comparison with experimental equilibrium properties. Our simulations suggest that the electrostatic interaction of tryptophan sidechains is responsible for much of the stability of the native fold. We conclude that the ff99 force field combined with ff96 φ and ψ dihedral energies and implicit solvent can reproduce plausible folding behavior in both trpzip2 and W2W9.
△ Less
Submitted 1 September, 2010;
originally announced September 2010.
-
Modified Newton's rings: II
Authors:
T. Sai Chaitanya,
Rajiv kumar,
V. Sai Krishna,
B Shankar Anandh,
K. S. Umesh
Abstract:
In an earlier work (Shankar kumar Jha, A Vyas, O S K S Sastri, Rajkumar Jain & K S Umesh, 'Determination of wavelength of laser light using Modified Newton's rings setup', Physics Education, vol. 22, no.3, 195-202(2005)) reported by our group, a version of Newton's rings experiment called Modified Newton's rings was proposed. The present work is an extension of this work. Here, a general formula f…
▽ More
In an earlier work (Shankar kumar Jha, A Vyas, O S K S Sastri, Rajkumar Jain & K S Umesh, 'Determination of wavelength of laser light using Modified Newton's rings setup', Physics Education, vol. 22, no.3, 195-202(2005)) reported by our group, a version of Newton's rings experiment called Modified Newton's rings was proposed. The present work is an extension of this work. Here, a general formula for wavelength has been derived, applicable for a plane of observation at any distance. A relation between the focal length and the radius curvature is also derived for a plano-convex lens which is essentially used as a concave mirror. Tracker, a video analysis software, freely downloadable from the net, is employed to analyze the fringes captured using a CCD camera. Two beams which give rise to interference fringes in conventional Newton's rings and in the present setup are clearly distinguished.
△ Less
Submitted 20 May, 2010;
originally announced May 2010.
-
Finite-size effects in the dependency networks of free and open-source software
Authors:
Rajiv Nair,
G. Nagarjuna,
Arnab K. Ray
Abstract:
We propose a continuum model for the degree distribution of directed networks in free and open-source software. The degree distributions of links in both the in-directed and out-directed dependency networks follow Zipf's law for the intermediate nodes, but the heavily linked nodes and the poorly linked nodes deviate from this trend and exhibit finite-size effects. The finite-size parameters make a…
▽ More
We propose a continuum model for the degree distribution of directed networks in free and open-source software. The degree distributions of links in both the in-directed and out-directed dependency networks follow Zipf's law for the intermediate nodes, but the heavily linked nodes and the poorly linked nodes deviate from this trend and exhibit finite-size effects. The finite-size parameters make a quantitative distinction between the in-directed and out-directed networks. For the out-degree distribution, the initial condition for a dynamic evolution corresponds to the limiting count of the most heavily liked nodes that the out-directed network can finally have. The number of nodes contributing out-directed links grows with every generation of software release, but this growth ultimately saturates towards a terminal value due to the finiteness of semantic possibilities in the network.
△ Less
Submitted 13 April, 2014; v1 submitted 30 January, 2009;
originally announced January 2009.
-
Modeling Amyloid Beta Peptide Insertion into Lipid Bilayers
Authors:
David L. Mobley,
Daniel L. Cox,
Rajiv R. P. Singh,
Michael W. Maddox,
Marjorie L. Longo
Abstract:
Inspired by recent suggestions that the Alzheimer's amyloid beta peptide (A beta) can insert into cell membranes and form harmful ion channels, we model insertion of the 40 and 42 residue forms of the peptide into cell membranes using a Monte Carlo code which is specific at the amino acid level. We examine insertion of the regular A-beta peptide as well as mutants causing familial Alzheimer's di…
▽ More
Inspired by recent suggestions that the Alzheimer's amyloid beta peptide (A beta) can insert into cell membranes and form harmful ion channels, we model insertion of the 40 and 42 residue forms of the peptide into cell membranes using a Monte Carlo code which is specific at the amino acid level. We examine insertion of the regular A-beta peptide as well as mutants causing familial Alzheimer's disease, and find that all but one of the mutants change the insertion behavior by causing the peptide to spend more simulation steps in only one leaflet of the bilayer. We also find that A-beta 42, because of the extra hydrophobic residues relative to A-beta 40, is more likely to adopt this conformation than A-beta 40 in both wild-type and mutant forms. We argue qualitatively why these effects happen. Here, we present our results and develop the hypothesis that this partial insertion increases the probability of harmful channel formation. This hypothesis can partly explain why these mutations are neurotoxic simply due to peptide insertion behavior. We further apply this model to various artificial A-beta mutants which have been examined experimentally, and offer testable experimental predictions contrasting the roles of aggregation and insertion with regard to toxicity of A-beta mutants. These can be used through further experiments to test our hypothesis.
△ Less
Submitted 23 January, 2004; v1 submitted 29 July, 2003;
originally announced July 2003.
-
Simulations of Oligomeric Intermediates in Prion Diseases
Authors:
David L. Mobley,
Daniel L. Cox,
Rajiv R. P. Singh,
Rahul V. Kulkarni,
Alexander Slepoy
Abstract:
We extend our previous stochastic cellular automata based model for areal aggregation of prion proteins on neuronal surfaces. The new anisotropic model allow us to simulate both strong beta-sheet and weaker attachment bonds between proteins. Constraining binding directions allows us to generate aggregate structures with the hexagonal lattice symmetry found in recently observed in vitro experimen…
▽ More
We extend our previous stochastic cellular automata based model for areal aggregation of prion proteins on neuronal surfaces. The new anisotropic model allow us to simulate both strong beta-sheet and weaker attachment bonds between proteins. Constraining binding directions allows us to generate aggregate structures with the hexagonal lattice symmetry found in recently observed in vitro experiments. We argue that these constraints on rules may correspond to underlying steric constraints on the aggregation process. We find that monomer dominated growth of the areal aggregate is too slow to account for some observed doubling time-to-incubation time ratios inferred from data, and so consider aggregation dominated by relatively stable but non-infectious oligomeric intermediates. We compare a kinetic theory analysis of oligomeric aggregation to spatially explicit simulations of the process. We find that with suitable rules for misfolding of oligomers, possibly due to water exclusion by the surrounding aggregate, the resulting oligomeric aggregation model maps onto our previous monomer aggregation model. Therefore it can produce some of the same attractive features for the description of prion incubation time data. We propose experiments to test the oligomeric aggregation model.
△ Less
Submitted 9 July, 2003;
originally announced July 2003.