-
Implementing an electronic sideband offset lock for precision spectroscopy in radium
Authors:
Tenzin Rabga,
Kevin G. Bailey,
Michael Bishof,
Donald W. Booth,
Matthew R. Dietrich,
John P. Greene,
Peter Mueller,
Thomas P. O'Connor,
Jaideep T. Singh
Abstract:
We demonstrate laser frequency stabilization with at least 6 GHz of offset tunability using an in-phase/quadrature (IQ) modulator to generate electronic sidebands (ESB) on a titanium sapphire laser at 714 nm and we apply this technique to the precision spectroscopy of $^{226}$Ra, and $^{225}$Ra. By locking the laser to a single resonance of a high finesse optical cavity and adjusting the lock offs…
▽ More
We demonstrate laser frequency stabilization with at least 6 GHz of offset tunability using an in-phase/quadrature (IQ) modulator to generate electronic sidebands (ESB) on a titanium sapphire laser at 714 nm and we apply this technique to the precision spectroscopy of $^{226}$Ra, and $^{225}$Ra. By locking the laser to a single resonance of a high finesse optical cavity and adjusting the lock offset, we determine the frequency difference between the magneto-optical trap (MOT) transitions in the two isotopes to be $2630.0\pm0.3$ MHz, a factor of 29 more precise than the previously available data. Using the known value of the hyperfine splitting of the $^{3}P_{1}$ level, we calculate the isotope shift for the $^{1}S_{0}$ to $^{3}P_{1}$ transition to be $2267.0\pm2.2$ MHz, which is a factor of 8 more precise than the best available value. Our technique could be applied to countless other atomic systems to provide unprecedented precision in isotope shift spectroscopy and other relative frequency comparisons.
△ Less
Submitted 15 September, 2023; v1 submitted 14 July, 2023;
originally announced July 2023.
-
Surface Processing and Discharge-Conditioning of High Voltage Electrodes for the Ra EDM Experiment
Authors:
Roy A. Ready,
Gordon Arrowsmith-Kron,
Kevin G. Bailey,
Dominic Battaglia,
Michael Bishof,
Daniel Coulter,
Matthew R. Dietrich,
Ruoyu Fang,
Brian Hanley,
Jake Huneau,
Sean Kennedy,
Peyton Lalain,
Benjamin Loseth,
Kellen McGee,
Peter Mueller,
Thomas P. O'Connor,
Jordan O'Kronley,
Adam Powers,
Tenzin Rabga,
Andrew Sanchez,
Eli Schalk,
Dale Waldo,
Jacob Wescott,
Jaideep T. Singh
Abstract:
The Ra EDM experiment uses a pair of high voltage electrodes to search for the atomic electric dipole moment of $^{225}$Ra. We use identical, plane-parallel electrodes with a primary high gradient surface of 200 mm$^2$ to generate reversible DC electric fields. Our statistical sensitivity is linearly proportional to the electric field strength in the electrode gap. We adapted surface decontaminati…
▽ More
The Ra EDM experiment uses a pair of high voltage electrodes to search for the atomic electric dipole moment of $^{225}$Ra. We use identical, plane-parallel electrodes with a primary high gradient surface of 200 mm$^2$ to generate reversible DC electric fields. Our statistical sensitivity is linearly proportional to the electric field strength in the electrode gap. We adapted surface decontamination and processing techniques from accelerator physics literature to chemical polish and clean a suite of newly fabricated large-grain niobium and grade-2 titanium electrodes. Three pairs of niobium electrodes and one pair of titanium electrodes were discharge-conditioned with a custom high voltage test station at electric field strengths as high as $+52.5$ kV/mm and $-51.5$ kV/mm over electrode gap sizes ranging from 0.4 mm to 2.5 mm. One pair of large-grain niobium electrodes was discharge-conditioned and validated to operate at $\pm 20$ kV/mm with steady-state leakage current $\leq 25$ pA ($1σ$) and a polarity-averaged $98 \pm 19$ discharges per hour. These electrodes were installed in the Ra EDM experimental apparatus, replacing a copper electrode pair, and were revalidated to $\pm 20$ kV/mm. The niobium electrodes perform at an electric field strength 3.1 times larger than the legacy copper electrodes and are ultimately limited by the maximum output of our 30 kV bipolar power supply.
△ Less
Submitted 26 September, 2021; v1 submitted 16 February, 2021;
originally announced February 2021.
-
Spectroscopic Study and Lifetime Measurement of the $6d7p$ $ ^{3}F_{2}^{o}$ state of radium
Authors:
D. W. Booth,
T. Rabga,
R. Ready,
K. G. Bailey,
M. Bishof,
M. R. Dietrich,
J. P. Greene,
P. Mueller,
T. P. O'Connor,
J. T. Singh
Abstract:
We report a method for the precision measurement of the oscillator strengths and the branching ratios of the decay channels of the $6d7p$ $^3F_2$ state in $^{226}$Ra. This method exploits a set of metastable states present in Ra, allowing a measurement of the oscillator strengths that does not require knowledge of the number of atoms in the atomic beam. We measure the oscillator strengths and the…
▽ More
We report a method for the precision measurement of the oscillator strengths and the branching ratios of the decay channels of the $6d7p$ $^3F_2$ state in $^{226}$Ra. This method exploits a set of metastable states present in Ra, allowing a measurement of the oscillator strengths that does not require knowledge of the number of atoms in the atomic beam. We measure the oscillator strengths and the branching ratios for decays to the $7s6d$ $^3D_1$, $7s6d$ $^3D_2$, and $7s6d$ $^1D_2$ states and constrain the branching ratio to the $7s6d$ $^3D_3$ state to be less than 0.4$\%$ (68$\%$ confidence limit). The lifetime of the $^3F_2$ state is determined to be $15 \pm 4$ ns.
△ Less
Submitted 7 October, 2019;
originally announced October 2019.
-
Characterizing the Optical Trap** of Rare Isotopes by Monte Carlo Simulation
Authors:
D. H. Potterveld,
S. A. Fromm,
K. G. Bailey,
M. Bishof,
D. W. Booth,
M. R. Dietrich,
J. P. Greene,
R. J. Holt,
M. R. Kalita,
W. Korsch,
N. D. Lemke,
P. Mueller,
T. P. O'Connor,
R. H. Parker,
T. Rabga,
J. T. Singh
Abstract:
Optical trap** techniques are an efficient way to probe limited quantities of rare isotopes. In order to achieve the highest possible measurement precision, it is critical to optimize the optical trap** efficiency. This work presents the development of a three-dimensional semi-classical Monte Carlo simulation of the optical trap** process and its application to optimizing the optical trappin…
▽ More
Optical trap** techniques are an efficient way to probe limited quantities of rare isotopes. In order to achieve the highest possible measurement precision, it is critical to optimize the optical trap** efficiency. This work presents the development of a three-dimensional semi-classical Monte Carlo simulation of the optical trap** process and its application to optimizing the optical trap** efficiency of Radium for use in the search of the permanent electric dipole moment of $^{225}$Ra. The simulation includes an effusive-oven atomic beam source, transverse cooling and Zeeman slowing of an atomic beam, a three-dimensional magneto-optical trap, and additional processes such as collisions with residual gas molecules. We benchmark the simulation against a well-characterized $^{88}$Sr optical trap before applying it to the $^{225}$Ra optical trap. The simulation reproduces the relative gains in optical trap** efficiency measured in both the $^{88}$Sr and $^{225}$Ra optical traps. The measured and simulated values of the overall optical trap** efficiencies for $^{88}$Sr are in agreement; however, they differ by a factor of $30$ for $^{225}$Ra. Studies of several potential imperfections in the apparatus or systematic effects, such as atomic beam source misalignment and laser frequency noise, show only limited effects on the simulated trap** efficiency for $^{225}$Ra. We rule out any one systematic effect as the sole cause of the discrepancy between the simulated and measured $^{225}$Ra optical trap** efficiencies; but, we do expect that a combination of systematic effects contribute to this discrepancy. The accurate relative gains predicted by the simulation prove that it is useful for testing planned upgrades to the apparatus.
△ Less
Submitted 18 March, 2019;
originally announced March 2019.
-
Quantum Sensing for High Energy Physics
Authors:
Zeeshan Ahmed,
Yuri Alexeev,
Giorgio Apollinari,
Asimina Arvanitaki,
David Awschalom,
Karl K. Berggren,
Karl Van Bibber,
Przemyslaw Bienias,
Geoffrey Bodwin,
Malcolm Boshier,
Daniel Bowring,
Davide Braga,
Karen Byrum,
Gustavo Cancelo,
Gianpaolo Carosi,
Tom Cecil,
Clarence Chang,
Mattia Checchin,
Sergei Chekanov,
Aaron Chou,
Aashish Clerk,
Ian Cloet,
Michael Crisler,
Marcel Demarteau,
Ranjan Dharmapalan
, et al. (91 additional authors not shown)
Abstract:
Report of the first workshop to identify approaches and techniques in the domain of quantum sensing that can be utilized by future High Energy Physics applications to further the scientific goals of High Energy Physics.
Report of the first workshop to identify approaches and techniques in the domain of quantum sensing that can be utilized by future High Energy Physics applications to further the scientific goals of High Energy Physics.
△ Less
Submitted 29 March, 2018;
originally announced March 2018.