Showing 1–9 of 9 results for author: Quan, Q

The multiplexed light storage of Orbital Angular Momentum based on atomic ensembles

Authors: Xin Yang, Hong Chang, **wen Wang, Yan Ma, Yun Chen, Shuwei Qiu, Zehao Shen, Chengyuan Wang, Quan Quan, Dong Wei, Haixia Chen, Mingtao Cao, Hong Gao, Fuli Li

Abstract: The improvement of the multi-mode capability of quantum memory can further improve the utilization efficiency of the quantum memory and reduce the requirement of quantum communication for storage units. In this letter, we experimentally investigate the multi-mode light multiplexing storage of orbital angular momentum (OAM) mode based on rubidium vapor, and demultiplexing by a photonic OAM mode spl… ▽ More The improvement of the multi-mode capability of quantum memory can further improve the utilization efficiency of the quantum memory and reduce the requirement of quantum communication for storage units. In this letter, we experimentally investigate the multi-mode light multiplexing storage of orbital angular momentum (OAM) mode based on rubidium vapor, and demultiplexing by a photonic OAM mode splitter which combines a Sagnac loop with two dove prisms. Our results show a mode extinction ratio higher than 80$\%$ at 1 $μ$s of storage time. Meanwhile, two OAM modes have been multiplexing stored and demultiplexed in our experimental configuration. We believe the experimental scheme may provide a possibility for high channel capacity and multi-mode quantum multiplexed quantum storage based on atomic ensembles. △ Less

Submitted 9 March, 2023; originally announced March 2023.

Observation of protected localized states induced by curved space in acoustic topological insulators

Authors: H. W. Wu, J. Q. Quan, Y. K. Liu, Y. Pan, Z. Q. Sheng, L. W. **g

Abstract: Topological insulators (TIs) with robust boundary states against perturbations and disorders provide a unique approach for manipulating waves, whereas curved space can effectively control the wave propagation on curved surfaces by the geometric potential effect as well. In general, two-dimensional (2D) TIs are designed on a flat surface; however, in most practical cases, curved topological structu… ▽ More Topological insulators (TIs) with robust boundary states against perturbations and disorders provide a unique approach for manipulating waves, whereas curved space can effectively control the wave propagation on curved surfaces by the geometric potential effect as well. In general, two-dimensional (2D) TIs are designed on a flat surface; however, in most practical cases, curved topological structures are required. In this study, we design a 2D curved acoustic TI by perforation on a curved rigid plate. We experimentally demonstrate that a topological localized state stands erect in the bulk gap, and the corresponding pressure distributions are confined at the position with the maximal curvature. Moreover, we experimentally verify the robustness of the topological localized state by introducing defects near the localized position. To understand the underlying mechanism of the topological localized state, a tight-binding model considering the geometric potential effect is proposed. The interaction between the geometrical curvature and topology in the system provides a novel scheme for manipulating and trap** wave propagation along the boundary of curved TIs, thereby offering potential applications in flexible devices. △ Less

Submitted 9 January, 2021; originally announced January 2021.

High-Q optical nanocavities in bulk single-crystal diamond

Authors: Michael J. Burek, Yiwen Chu, Madelaine S. Z. Liddy, Parth Patel, Jake Rochman, Srujan Meesala, Wooyoung Hong, Qimin Quan, Mikhail D. Lukin, Marko Lončar

Abstract: Single-crystal diamond, with its unique optical, mechanical and thermal properties, has emerged as a promising material with applications in classical and quantum optics. However, the lack of heteroepitaxial growth and scalable fabrication techniques remain major limiting factors preventing more wide-spread development and application of diamond photonics. In this work, we overcome this difficulty… ▽ More Single-crystal diamond, with its unique optical, mechanical and thermal properties, has emerged as a promising material with applications in classical and quantum optics. However, the lack of heteroepitaxial growth and scalable fabrication techniques remain major limiting factors preventing more wide-spread development and application of diamond photonics. In this work, we overcome this difficulty by adapting angled-etching techniques, previously developed for realization of diamond nanomechanical resonators, to fabricate racetrack resonators and photonic crystal cavities in bulk single-crystal diamond. Our devices feature large optical quality factors, in excess of 10^5, and operate over a wide wavelength range, spanning visible and telecom. These newly developed high-Q diamond optical nanocavities open the door for a wealth of applications, ranging from nonlinear optics and chemical sensing, to quantum information processing and cavity optomechanics. △ Less

Submitted 25 August, 2014; originally announced August 2014.

Single atom trap** and control inside a nanosize photonic crystal cavity

Authors: Elena Kuznetsova, Johannes Feist, Qimin Quan, Jeff D. Thompson, Tobias Tiecke, Susanne F. Yelin, Mikhail D. Lukin

Abstract: We analyze a possibility to trap, control and load a single atom inside a nanosize cavity formed in a photonic crystal. We consider a 1D nanobeam crystal having two nearly degenerate localized modes with mode maxima at the central air gap, forming a cavity with a mode volume <λ^{3}. For this system we found that an atom can be trapped by a mode detuned from an atomic transition and controled by th… ▽ More We analyze a possibility to trap, control and load a single atom inside a nanosize cavity formed in a photonic crystal. We consider a 1D nanobeam crystal having two nearly degenerate localized modes with mode maxima at the central air gap, forming a cavity with a mode volume <λ^{3}. For this system we found that an atom can be trapped by a mode detuned from an atomic transition and controled by the second resonant mode. We show that atomic motion can be cooled using cavity-enhanced rf Sisyphus cooling. We also discuss how an atom can be loaded inside the nanosize crystal air gap from short-wavelength optical tweezers. △ Less

Submitted 22 January, 2013; v1 submitted 19 January, 2013; originally announced January 2013.

Comments: This paper has been withdrawn to include some critical changes

Broadband Reconfiguration of OptoMechanical Filters

Authors: Parag B. Deotare, Irfan Bulu, Ian W. Frank, Qimin Quan, Yinan Zhang, Rob Ilic, Marko Loncar

Abstract: We demonstrate broad-band reconfiguration of coupled photonic crystal nanobeam cavities by using optical gradient force induced mechanical actuation. Propagating waveguide modes that exist over wide wavelength range are used to actuate the structures and in that way control the resonance of localized cavity mode. Using this all-optical approach, more than 18 linewidths of tuning range is demonstra… ▽ More We demonstrate broad-band reconfiguration of coupled photonic crystal nanobeam cavities by using optical gradient force induced mechanical actuation. Propagating waveguide modes that exist over wide wavelength range are used to actuate the structures and in that way control the resonance of localized cavity mode. Using this all-optical approach, more than 18 linewidths of tuning range is demonstrated. Using on-chip temperature self-referencing method that we developed, we determined that 20 % of the total tuning was due to optomechanical reconfiguration and the rest due to thermo-optic effects. Independent control of mechanical and optical resonances of our structures, by means of optical stiffening, is also demonstrated. △ Less

Submitted 15 January, 2012; originally announced January 2012.

Integrated diamond networks for quantum nanophotonics

Authors: Birgit J. M. Hausmann, Brendan Shields, Qimin Quan, Patrick Maletinsky, Murray McCutcheon, Jennifer T. Choy, Tom M. Babinec, Alexander Kubanek, Amir Yacoby, Mikhail D. Lukin, Marko Loncar

Abstract: Diamond is a unique material with exceptional physical and chemical properties that offers potential for the realization of high-performance devices with novel functionalities. For example diamond's high refractive index, transparency over wide wavelength range, and large Raman gain are of interest for the implementation of novel photonic devices. Recently, atom-like impurities in diamond emerged… ▽ More Diamond is a unique material with exceptional physical and chemical properties that offers potential for the realization of high-performance devices with novel functionalities. For example diamond's high refractive index, transparency over wide wavelength range, and large Raman gain are of interest for the implementation of novel photonic devices. Recently, atom-like impurities in diamond emerged as an exceptional system for quantum information processing, quantum sensing and quantum networks. For these and other applications, it is essential to develop an integrated nanophotonic platform based on diamond. Here, we report on the realization of such an integrated diamond photonic platform, diamond on insulator (DOI), consisting of a thin single crystal diamond film on top of an insulating silicon dioxide/silicon substrate. Using this approach, we demonstrate diamond ring resonators that operate in a wide wavelength range, including the visible (630nm) and near-infrared (1,550nm). Finally, we demonstrate an integrated, on-chip quantum nanophotonic network, consisting of ring resonators coupled to low loss waveguides with grating couplers, that enables the generation and efficient routing of single photons at room temperature. △ Less

Submitted 5 January, 2012; v1 submitted 22 November, 2011; originally announced November 2011.

Comments: This paper has been withdrawn to change the outline of the paper

Deterministic design of wavelength scale, ultra-high Q photonic crystal nanobeam cavities

Authors: Qimin Quan, Marko Loncar

Abstract: Photonic crystal nanobeam cavities are versatile platforms of interest for optical communications, optomechanics, optofluidics, cavity QED, etc. In a previous work \cite{quan10}, we proposed a deterministic method to achieve ultrahigh \emph{Q} cavities. This follow-up work provides systematic analysis and verifications of the deterministic design recipe and further extends the discussion to air-mo… ▽ More Photonic crystal nanobeam cavities are versatile platforms of interest for optical communications, optomechanics, optofluidics, cavity QED, etc. In a previous work \cite{quan10}, we proposed a deterministic method to achieve ultrahigh \emph{Q} cavities. This follow-up work provides systematic analysis and verifications of the deterministic design recipe and further extends the discussion to air-mode cavities. We demonstrate designs of dielectric-mode and air-mode cavities with $Q>10^9$, as well as cavities with both high-\emph{Q} ($>10^7$) and high on-resonance transmissions ($T>95%$). △ Less

Submitted 12 August, 2011; originally announced August 2011.

High-Q, low index-contrast polymeric photonic crystal nanobeam cavities

Authors: Qimin Quan, Ian B. Burgess, Sindy K. Y. Tang, Daniel L. Floyd, Marko Loncar

Abstract: We present the design, fabrication and characterization of high-\emph{Q} (\emph{Q}=36,000) polymeric photonic crystal nanobeam cavities made of two polymers that have an ultra-low index contrast (ratio=1.15) and observed thermo-optical bistability at hundred microwatt power level. Due to the extended evanescent field and small mode volumes, polymeric nanobeam cavities are ideal platform for ultra-… ▽ More We present the design, fabrication and characterization of high-\emph{Q} (\emph{Q}=36,000) polymeric photonic crystal nanobeam cavities made of two polymers that have an ultra-low index contrast (ratio=1.15) and observed thermo-optical bistability at hundred microwatt power level. Due to the extended evanescent field and small mode volumes, polymeric nanobeam cavities are ideal platform for ultra-sensitive biochemical sensing. We demonstrate that these sensors have figures of merit (FOM=9190) two orders of magnitude greater than surface plasmon resonance based sensors, and outperform the commercial Biacore$^{\mathrm{TM}}$ sensors. The demonstration of high-Q cavity in low-index-contrast polymers can open up versatile applications using a broad range of functional and flexible polymeric materials. △ Less

Submitted 12 August, 2011; originally announced August 2011.

Photonic Crystal Nanobeam Cavity Strongly Coupled to the Feeding Waveguide

Authors: Qimin Quan, Parag B Deotare, Marko Loncar

Abstract: A deterministic design of an ultrahigh Q, wavelength scale mode volume photonic crystal nanobeam cavity is proposed and experimentally demonstrated. Using this approach, cavities with Q>10^6 and on-resonance transmission T>90% are designed. The devices fabricated in Si and capped with low-index polymer, have Q=80,000 and T=73%. This is, to the best of our knowledge, the highest transmission meas… ▽ More A deterministic design of an ultrahigh Q, wavelength scale mode volume photonic crystal nanobeam cavity is proposed and experimentally demonstrated. Using this approach, cavities with Q>10^6 and on-resonance transmission T>90% are designed. The devices fabricated in Si and capped with low-index polymer, have Q=80,000 and T=73%. This is, to the best of our knowledge, the highest transmission measured in deterministically designed, wavelength scale high Q cavities. △ Less

Submitted 6 February, 2010; originally announced February 2010.

Journal ref: Appl. Phys. Lett. 96, 203102 (2010)