-
General-purpose machine-learned potential for 16 elemental metals and their alloys
Authors:
Keke Song,
Rui Zhao,
Jiahui Liu,
Yanzhou Wang,
Eric Lindgren,
Yong Wang,
Shunda Chen,
Ke Xu,
Ting Liang,
Penghua Ying,
Nan Xu,
Zhiqiang Zhao,
Jiuyang Shi,
Junjie Wang,
Shuang Lyu,
Zezhu Zeng,
Shirong Liang,
Haikuan Dong,
Ligang Sun,
Yue Chen,
Zhuhua Zhang,
Wanlin Guo,
** Qian,
Jian Sun,
Paul Erhart
, et al. (3 additional authors not shown)
Abstract:
Machine-learned potentials (MLPs) have exhibited remarkable accuracy, yet the lack of general-purpose MLPs for a broad spectrum of elements and their alloys limits their applicability. Here, we present a feasible approach for constructing a unified general-purpose MLP for numerous elements, demonstrated through a model (UNEP-v1) for 16 elemental metals and their alloys. To achieve a complete repre…
▽ More
Machine-learned potentials (MLPs) have exhibited remarkable accuracy, yet the lack of general-purpose MLPs for a broad spectrum of elements and their alloys limits their applicability. Here, we present a feasible approach for constructing a unified general-purpose MLP for numerous elements, demonstrated through a model (UNEP-v1) for 16 elemental metals and their alloys. To achieve a complete representation of the chemical space, we show, via principal component analysis and diverse test datasets, that employing one-component and two-component systems suffices. Our unified UNEP-v1 model exhibits superior performance across various physical properties compared to a widely used embedded-atom method potential, while maintaining remarkable efficiency. We demonstrate our approach's effectiveness through reproducing experimentally observed chemical order and stable phases, and large-scale simulations of plasticity and primary radiation damage in MoTaVW alloys. This work represents a significant leap towards a unified general-purpose MLP encompassing the periodic table, with profound implications for materials science.
△ Less
Submitted 12 June, 2024; v1 submitted 8 November, 2023;
originally announced November 2023.
-
Comparisons among the Performances of Randomized-framed Benchmarking Protocols under T1, T2 and Coherent Error Models
Authors:
Xudan Chai,
Yanwu Gu,
Weifeng Zhuang,
Peng Qian,
Xiao Xiao,
Dong E Liu
Abstract:
While fundamental scientific researchers are eagerly anticipating the breakthroughs of quantum computing both in theory and technology, the current quantum computer, i.e. noisy intermediate-scale quantum (NISQ) computer encounters a bottleneck in how to deal with the noisy situation of the quantum machine. It is still urgently required to construct more efficient and reliable benchmarking protocol…
▽ More
While fundamental scientific researchers are eagerly anticipating the breakthroughs of quantum computing both in theory and technology, the current quantum computer, i.e. noisy intermediate-scale quantum (NISQ) computer encounters a bottleneck in how to deal with the noisy situation of the quantum machine. It is still urgently required to construct more efficient and reliable benchmarking protocols through which one can assess the noise level of a quantum circuit that is designed for a quantum computing task. The existing methods that are mainly constructed based on a sequence of random circuits, such as randomized benchmarking (RB), have been commonly adopted as the conventional approach owning to its reasonable resource consumption and relatively acceptable reliability, compared with the average gate fidelity. To more deeply understand the performances of the above different randomized-framed benchmarking protocols, we design special random circuit sequences to test the performances of the three selected standard randomized-frame protocols under T1, T2, and coherent errors, which are regarded to be more practical for a superconductor quantum computer. The simulations indicate that MRB, DRB, and CRB sequentially overestimate the average error rate in the presence of T1 and T2 noise, compared with the conventional circuit's average error. Moreover, these methods exhibit almost the same level of sensitivity to the coherent error. Furthermore, the DRB loses its reliability when the strengths of T1 grow. More practically, the simulated conclusion is verified by running the designed tasks for three protocols on the Quafu quantum computation cloud platform. We find that MRB produces a more precise assessment of a quantum circuit conditioned on limited resources. However, the DRB provides a more stable estimation at a specific precision while a more resource-consuming.
△ Less
Submitted 27 September, 2023;
originally announced September 2023.
-
Large-scale machine-learning molecular dynamics simulation of primary radiation damage in tungsten
Authors:
Jiahui Liu,
Jesper Byggmastar,
Zheyong Fan,
** Qian,
Yan**g Su
Abstract:
Simulating collision cascades and radiation damage poses a long-standing challenge for existing interatomic potentials, both in terms of accuracy and efficiency. Machine-learning based interatomic potentials have shown sufficiently high accuracy for radiation damage simulations, but most existing ones are still not efficient enough to model high-energy collision cascades with sufficiently large sp…
▽ More
Simulating collision cascades and radiation damage poses a long-standing challenge for existing interatomic potentials, both in terms of accuracy and efficiency. Machine-learning based interatomic potentials have shown sufficiently high accuracy for radiation damage simulations, but most existing ones are still not efficient enough to model high-energy collision cascades with sufficiently large space and time scales. To this end, we here extend the highly efficient neuroevolution potential (NEP) framework by combining it with the Ziegler-Biersack-Littmark (ZBL) screened nuclear repulsion potential, obtaining a NEP-ZBL framework. We train a NEP-ZBL model for tungsten and demonstrate its accuracy in terms of the elastic properties, melting point, and various energetics of defects that are relevant for radiation damage. We then perform large-scale molecular dynamics simulations with the NEP-ZBL model with up to 8.1 million atoms and 240 ps (using a single 40-GB A100 GPU) to study the difference of primary radiation damage in both bulk and thin-foil tungsten. While our findings for bulk tungsten are consistent with existing results simulated by embedded atom method (EAM) models, the radiation damage differs significantly in foils and shows that larger and more vacancy clusters as well as smaller and fewer interstitial clusters are produced due to the presence of a free surface.
△ Less
Submitted 12 August, 2023; v1 submitted 14 May, 2023;
originally announced May 2023.
-
Anisotropic and high thermal conductivity in monolayer quasi-hexagonal fullerene: A comparative study against bulk phase fullerene
Authors:
Haikuan Dong,
Chenyang Cao,
Penghua Ying,
Zheyong Fan,
** Qian,
Yan**g Su
Abstract:
Recently a novel two-dimensional (2D) C$_{60}$ based crystal called quasi-hexagonal-phase fullerene (QHPF) has been fabricated and demonstrated to be a promising candidate for 2D electronic devices [Hou et al. Nature 606, 507-510 (2022)]. We construct an accurate and transferable machine-learned potential to study heat transport and related properties of this material, with a comparison to the fac…
▽ More
Recently a novel two-dimensional (2D) C$_{60}$ based crystal called quasi-hexagonal-phase fullerene (QHPF) has been fabricated and demonstrated to be a promising candidate for 2D electronic devices [Hou et al. Nature 606, 507-510 (2022)]. We construct an accurate and transferable machine-learned potential to study heat transport and related properties of this material, with a comparison to the face-centered-cubic bulk-phase fullerene (BPF). Using the homogeneous nonequilibrium molecular dynamics and the related spectral decomposition methods, we show that the thermal conductivity in QHPF is anisotropic, which is 137(7) W/mK at 300 K in the direction parallel to the cycloaddition bonds and 102(3) W/mK in the perpendicular in-plane direction. By contrast, the thermal conductivity in BPF is isotropic and is only 0.45(5) W/mK. We show that the inter-molecular covalent bonding in QHPF plays a crucial role in enhancing the thermal conductivity in QHPF as compared to that in BPF. The heat transport properties as characterized in this work will be useful for the application of QHPF as novel 2D electronic devices.
△ Less
Submitted 9 February, 2023; v1 submitted 8 August, 2022;
originally announced August 2022.
-
Quantum-corrected thickness-dependent thermal conductivity in amorphous silicon predicted by machine-learning molecular dynamics simulations
Authors:
Yanzhou Wang,
Zheyong Fan,
** Qian,
Miguel A. Caro,
Tapio Ala-Nissila
Abstract:
Amorphous silicon (a-Si) is an important thermal-management material and also serves as an ideal playground for studying heat transport in strongly disordered materials. Theoretical prediction of the thermal conductivity of a-Si in a wide range of temperatures and sample sizes is still a challenge. Herein we present a systematic investigation of the thermal transport properties of a-Si by employin…
▽ More
Amorphous silicon (a-Si) is an important thermal-management material and also serves as an ideal playground for studying heat transport in strongly disordered materials. Theoretical prediction of the thermal conductivity of a-Si in a wide range of temperatures and sample sizes is still a challenge. Herein we present a systematic investigation of the thermal transport properties of a-Si by employing large-scale molecular dynamics (MD) simulations with an accurate and efficient machine-learned neuroevolution potential (NEP) trained against abundant reference data calculated at the quantum-mechanical density-functional-theory level. The high efficiency of NEP allows us to study the effects of finite size and quenching rate in the formation of a-Si in great detail. We find that it requires a simulation cell up to $64,000$ atoms (a cubic cell with a linear size of 11 nm) and a quenching rate down to $10^{11}$ K s$^{-1}$ for fully convergent thermal conductivity. Structural properties, including short- and medium-range order as characterized by the pair correlation function, angular distribution function, coordination number, ring statistics and structure factor are studied to demonstrate the accuracy of NEP and to further evaluate the role of quenching rate. Using both the heterogeneous and the homogeneous nonequilibrium MD methods and the related spectral decomposition techniques, we calculate the temperature- and thickness-dependent thermal conductivity values of a-Si and show that they agree well with available experimental results from 10 K to room temperature. Our results also highlight the importance of quantum effects in the calculated thermal conductivity and support the quantum correction method based on the spectral thermal conductivity.
△ Less
Submitted 9 January, 2023; v1 submitted 15 June, 2022;
originally announced June 2022.
-
Characteristics of grassy ELMs and its impact on the divertor heat flux width
Authors:
Nami Li,
X. Q. Xu,
N. Yan,
Y. F. Wang,
J. Y. Zhang,
J. P. Qian,
J. Z. Sun,
D. Z. Wang
Abstract:
BOUT++ turbulence simulations are conducted for a 60s steady-state long pulse high \{beta}p EAST grassy ELM discharge. BOUT++ linear simulations show that the unstable mode spectrum covers a range of toroidal mode numbers from low-n (n=10~15) peeling-ballooning modes (P-B) to high-n (n=40~80) drift-Alfvén instabilities. Nonlinear simulations show that the ELM crash is trigged by low-n peeling mode…
▽ More
BOUT++ turbulence simulations are conducted for a 60s steady-state long pulse high \{beta}p EAST grassy ELM discharge. BOUT++ linear simulations show that the unstable mode spectrum covers a range of toroidal mode numbers from low-n (n=10~15) peeling-ballooning modes (P-B) to high-n (n=40~80) drift-Alfvén instabilities. Nonlinear simulations show that the ELM crash is trigged by low-n peeling modes and fluctuation is generated at the peak pressure gradient position and radially spread outward into the Scrape-Off-Layer (SOL), even though the drift-Alfvén instabilities dominate the linear growth phase. However, drift-Alfvén turbulence delays the onset of the grassy ELM and enhances the energy loss with the fluctuation extending to pedestal top region. Simulations further show that if the peeling drive is removed, the fluctuation amplitude drops by an order of magnitude and the ELM crashes disappear. The divertor heat flux width is ~2 times larger than the estimates based on the HD model and the ITPA multi-tokamak scaling (or empirical Eich scaling) due to the strong radial turbulence transport.
△ Less
Submitted 29 March, 2022;
originally announced March 2022.
-
Influence of Micro-turbulence on Neoclassical Tearing Mode Onset
Authors:
Tonghui Shi,
L. Wei,
H. H. Wang,
E. Li,
B. Shen,
J. P. Qian,
Y. M. Wang,
T. Zhang,
H. L. Zhao,
L. Zeng,
Y. Zhang,
H. Q. Liu,
Q. Ma,
D. L. Chen,
Z. P. Luo,
Y. Y. Li,
Z. C. Shen,
L. Q. Xu,
B. Zhang,
M. H. Li,
Z. X. Wang,
B. L. Ling,
X. Z. Gong,
Y. Sun,
B. Wan
Abstract:
Direct evidence of micro-turbulence effect on the onset of neoclassical tearing mode (NTM) is reported for the first time in this letter. A puzzling positive correlation between critical width of seed island of NTM and normalized plasma pressure beta_p is first observed employing a novel method for clearly separating the processes of seed island and the onset of NTM in the EAST tokamak. Different…
▽ More
Direct evidence of micro-turbulence effect on the onset of neoclassical tearing mode (NTM) is reported for the first time in this letter. A puzzling positive correlation between critical width of seed island of NTM and normalized plasma pressure beta_p is first observed employing a novel method for clearly separating the processes of seed island and the onset of NTM in the EAST tokamak. Different from the methods developed before, the width of the seed island is well controlled by slowly ram** up the current in resonant magnetic perturbation coils. It is revealed that the positive correlation is mainly attributed to the enhancement of perpendicular transport by micro-turbulence, which overcomes the destabilizing effect of beta_p on the onset of NTM. Reduced magnetohydrodynamics (MHD) modeling well reproduced the two states of nonlinear bifurcations observed in this experiment by including the finite transport effect. This result provides a new route for understanding multi-scale interaction in plasma physics.
△ Less
Submitted 29 March, 2021;
originally announced March 2021.
-
Interpretation of apparent thermal conductivity in finite systems from equilibrium molecular dynamics simulations
Authors:
Haikuan Dong,
Shiyun Xiong,
Zheyong Fan,
** Qian,
Yan**g Su,
Tapio Ala-Nissila
Abstract:
We propose a way to properly interpret the apparent thermal conductivity obtained for finite systems using equilibrium molecular dynamics simulations (EMD) with fixed or open boundary conditions in the transport direction. In such systems the heat current autocorrelation function develops negative values after a correlation time which is proportional to the length of the simulation cell in the tra…
▽ More
We propose a way to properly interpret the apparent thermal conductivity obtained for finite systems using equilibrium molecular dynamics simulations (EMD) with fixed or open boundary conditions in the transport direction. In such systems the heat current autocorrelation function develops negative values after a correlation time which is proportional to the length of the simulation cell in the transport direction. Accordingly, the running thermal conductivity develops a maximum value at the same correlation time and eventually decays to zero. By comparing EMD with nonequilibrium molecular dynamics (NEMD) simulations, we conclude that the maximum thermal conductivity from EMD in a system with domain length 2L is equal to the thermal conductivity from NEMD in a system with domain length L. This facilitates the use of nonperiodic-boundary EMD for thermal transport in finite samples in close correspondence to NEMD.
△ Less
Submitted 23 November, 2020; v1 submitted 20 November, 2020;
originally announced November 2020.
-
A minimal Tersoff potential for diamond silicon with improved descriptions of elastic and phonon transport properties
Authors:
Zheyong Fan,
Yanzhou Wang,
Xiaokun Gu,
** Qian,
Yan**g Su,
Tapio Ala-Nissila
Abstract:
Silicon is an important material and many empirical interatomic potentials have been developed for atomistic simulations of it. Among them, the Tersoff potential and its variants are the most popular ones. However, all the existing Tersoff-like potentials fail to reproduce the experimentally measured thermal conductivity of diamond silicon. Here we propose a modified Tersoff potential and develop…
▽ More
Silicon is an important material and many empirical interatomic potentials have been developed for atomistic simulations of it. Among them, the Tersoff potential and its variants are the most popular ones. However, all the existing Tersoff-like potentials fail to reproduce the experimentally measured thermal conductivity of diamond silicon. Here we propose a modified Tersoff potential and develop an efficient open source code called GPUGA (graphics processing units genetic algorithm) based on the genetic algorithm and use it to fit the potential parameters against energy, virial and force data from quantum density functional theory calculations. This potential, which is implemented in the efficient open source GPUMD (graphics processing units molecular dynamics) code, gives significantly improved descriptions of the thermal conductivity and phonon dispersion of diamond silicon as compared to previous Tersoff potentials and at the same time well reproduces the elastic constants. Furthermore, we find that quantum effects on the thermal conductivity of diamond silicon at room temperature are non-negligible but small: using classical statistics underestimates the thermal conductivity by about 10\% as compared to using quantum statistics.
△ Less
Submitted 25 September, 2019;
originally announced September 2019.
-
Analysis of Alfven Eigenmode destabilization in DIII-D high poloidal $β$ discharges using a Landau closure model
Authors:
J. Varela,
D. A. Spong,
L. Garcia,
J. Huang,
M. Murakami,
A. M. Garofalo,
J. P. Qian,
C. T. Holcomb,
A. W. Hyatt,
J. R. Ferron,
C. S. Collins,
Q. L. Ren,
J. McClenaghan,
W. Guo
Abstract:
Alfven Eigenmodes are destabilized at the DIII-D pedestal during transient beta drops in high poloidal beta discharges with internal transport barriers (ITBs), driven by n=1 external kink modes, leading to energetic particle losses. There are two different scenarios in the thermal beta recovery phase: with bifurcation (two instability branches with different frequencies) or without bifurcation (si…
▽ More
Alfven Eigenmodes are destabilized at the DIII-D pedestal during transient beta drops in high poloidal beta discharges with internal transport barriers (ITBs), driven by n=1 external kink modes, leading to energetic particle losses. There are two different scenarios in the thermal beta recovery phase: with bifurcation (two instability branches with different frequencies) or without bifurcation (single instability branch). We use the reduced MHD equations in a full 3D system, coupled with equations of density and parallel velocity moments for the energetic particles as well as the geodesic acoustic wave dynamics, to study the properties of the instabilities observed in the DIII-D high poloidal beta discharges and identify the conditions to trigger the bifurcation. The simulations suggest that instabilities with lower frequency in the bifurcation case are ballooning modes driven at the plasma pedestal, while the instability branch with higher frequencies are low n (n<4) Toroidal Alfven Eigenmodes nearby the pedestal. The reverse shear region between the middle and plasma periphery in the non-bifurcated case avoids the excitation of ballooning modes at the pedestal, although Toroidal Alfven Eigenmodes and Reverse Shear Alfven Eigenmodes are unstable in the reverse shear region. The n=1 and n=2 Alfven Eigenmode activity can be suppressed or minimized if the neutral beam injector (NBI) intensity is lower than the experimental value (betaf < 0.03). In addition, if the beam energy or neutral beam injector voltage is lower than in the experiment (Vth,f / VA0 < 0.2), the resonance between beam and thermal plasma is weaker. The n=3,4,5 and 6 AE activity can't be fully suppressed, although the growth rate and frequency is smaller for an optimized neutral beam injector operation regime. In conclusion, AE activity in high poloidal beta discharges can be minimized for optimized NBI operation regimes.
△ Less
Submitted 11 July, 2018;
originally announced July 2018.
-
Intrinsic DNA Curvature of Double-Crossover Tiles
Authors:
Seungjae Kim,
Junghoon Kim,
Pengfei Qian,
Jihoon Shin,
Rashid Amin,
Sang Jung Ahn,
Thomas H. LaBean,
Moon Ki Kim,
Sung Ha Park
Abstract:
A theoretical model which takes into account the structural distortion of double-crossover DNA tiles has been studied to investigate its effect on lattice formation sizes. It has been found that a single vector appropriately describes the curvature of the tiles, of which a higher magnitude hinders lattice growth. In conjunction with these calculations, normal mode analysis reveals that tiles with…
▽ More
A theoretical model which takes into account the structural distortion of double-crossover DNA tiles has been studied to investigate its effect on lattice formation sizes. It has been found that a single vector appropriately describes the curvature of the tiles, of which a higher magnitude hinders lattice growth. In conjunction with these calculations, normal mode analysis reveals that tiles with relative higher frequencies have an analogous effect. All the theoretical results are shown to be in good agreement with experimental data.
△ Less
Submitted 11 May, 2011;
originally announced May 2011.