-
Calibrated absolute optical contrast for high-throughput characterization of horizontally aligned carbon nanotube arrays
Authors:
Yue Li,
Ying Xie,
Jian** Wang,
Yang Xu,
Shurui Wang,
Yunbiao Zhao,
Liu Qian,
Ziqiang Zhao,
** Zhang
Abstract:
Horizontally aligned carbon nanotube (HACNT) arrays hold significant potential for various applications in nanoelectronics and material science. However, their high-throughput characterization remains challenging due to the lack of methods with both high efficiency and high accuracy. Here, we present a novel technique, Calibrated Absolute Optical Contrast (CAOC), achieved through the implementatio…
▽ More
Horizontally aligned carbon nanotube (HACNT) arrays hold significant potential for various applications in nanoelectronics and material science. However, their high-throughput characterization remains challenging due to the lack of methods with both high efficiency and high accuracy. Here, we present a novel technique, Calibrated Absolute Optical Contrast (CAOC), achieved through the implementation of differential principles to filter out stray signals and high-resolution calibration to endow optical contrast with physical significance. CAOC offers major advantages over previous characterization techniques, providing consistent and reliable measurements of HACNT array density with high throughput and non-destructive assessment. To validate its utility, we demonstrate wafer-scale uniformity assessment by rapid density map**. This technique not only facilitates the practical evaluation of HACNT arrays but also provides insights into balancing high throughput and high resolution in nanomaterial characterization.
△ Less
Submitted 5 June, 2024;
originally announced June 2024.
-
Transforming the Synthesis of Carbon Nanotubes with Machine Learning Models and Automation
Authors:
Yue Li,
Shurui Wang,
Zhou Lv,
Zhaoji Wang,
Yunbiao Zhao,
Ying Xie,
Yang Xu,
Liu Qian,
Yaodong Yang,
Ziqiang Zhao,
** Zhang
Abstract:
Carbon-based nanomaterials (CBNs) are showing significant potential in various fields, such as electronics, energy, and mechanics. However, their practical applications face synthesis challenges stemming from the complexities of structural control, large-area uniformity, and high yield. Current research methodologies fall short in addressing the multi-variable, coupled interactions inherent to CBN…
▽ More
Carbon-based nanomaterials (CBNs) are showing significant potential in various fields, such as electronics, energy, and mechanics. However, their practical applications face synthesis challenges stemming from the complexities of structural control, large-area uniformity, and high yield. Current research methodologies fall short in addressing the multi-variable, coupled interactions inherent to CBNs production. Machine learning methods excel at navigating such complexities. Their integration with automated synthesis platforms has demonstrated remarkable potential in accelerating chemical synthesis research, but remains underexplored in the nanomaterial domain. Here we introduce Carbon Copilot (CARCO), an artificial intelligence (AI)-driven platform that integrates transformer-based language models tailored for carbon materials, robotic chemical vapor deposition (CVD), and data-driven machine learning models, empowering accelerated research of CBNs synthesis. Employing CARCO, we demonstrate innovative catalyst discovery by predicting a superior Titanium-Platinum bimetallic catalyst for high-density horizontally aligned carbon nanotube (HACNT) array synthesis, validated through over 500 experiments. Furthermore, with the assistance of millions of virtual experiments, we achieved an unprecedented 56.25% precision in synthesizing HACNT arrays with predetermined densities in the real world. All were accomplished within just 43 days. This work not only advances the field of HACNT arrays but also exemplifies the integration of AI with human expertise to overcome the limitations of traditional experimental approaches, marking a paradigm shift in nanomaterials research and paving the way for broader applications.
△ Less
Submitted 1 April, 2024;
originally announced April 2024.
-
High precision atom interferometer-based dynamic gravimeter measurement by eliminating the cross-coupling effect
Authors:
Yang Zhou,
Wenzhang Wang,
Guiguo Ge,
**ting Li,
Danfang Zhang,
Meng He,
Biao Tang,
Jiaqi Zhong,
Lin Zhou,
Runbing Li,
Lin Mao,
Hao Che,
Leiyuan Qian,
Yang Li,
Fangjun Qin,
Jie Fang,
Xi Chen,
** Wang,
Mingsheng Zhan
Abstract:
A dynamic gravimeter with an atomic interferometer (AI) can perform absolute gravity measurements with high precision. AI-based dynamic gravity measurement is a type of joint measurement that uses AI sensors and a classical accelerometer. The coupling of the two sensors may degrade the measurement precision. In this study, we analyzed the cross-coupling effect and introduced a recovery vector to s…
▽ More
A dynamic gravimeter with an atomic interferometer (AI) can perform absolute gravity measurements with high precision. AI-based dynamic gravity measurement is a type of joint measurement that uses AI sensors and a classical accelerometer. The coupling of the two sensors may degrade the measurement precision. In this study, we analyzed the cross-coupling effect and introduced a recovery vector to suppress this effect. We improved the phase noise of the interference fringe by a factor of 1.9 by performing marine gravity measurements using an AI-based gravimeter and optimizing the recovery vector. Marine gravity measurements were performed, and high gravity measurement precision was achieved. The external and inner coincidence accuracies of the gravity measurement are 0.42 mGal and 0.46 mGal, which were improved by factors of 4.18 and 4.21 by optimizing the cross-coupling effect.
△ Less
Submitted 28 December, 2023; v1 submitted 12 December, 2023;
originally announced December 2023.
-
Non-Hermitian Optical Parametric Systems with Anti-parity-time Symmetry
Authors:
Ben Li,
Yanfang Zhang,
**g Wang,
Wenhao Wang,
**gui Ma,
Peng Yuan,
Dongfang Zhang,
Yongfeng Mei,
Heyuan Zhu,
Hao Zhang,
Liejia Qian
Abstract:
The continuous advancements in ultrafast lasers, characterized by high pulse energy, great average power, and ultrashort pulse duration, have opened up new frontiers and applications in various fields such as high-energy-density science. In this study, we investigated the implementation of non-Hermitian nonlinear parametric amplification by introducing anti-parity-time (anti-PT) symmetry to three-…
▽ More
The continuous advancements in ultrafast lasers, characterized by high pulse energy, great average power, and ultrashort pulse duration, have opened up new frontiers and applications in various fields such as high-energy-density science. In this study, we investigated the implementation of non-Hermitian nonlinear parametric amplification by introducing anti-parity-time (anti-PT) symmetry to three-wave interaction processes. By exploring the parameter space defined by the coupling coefficient, phase mismatch, and absorption, we categorized the behavior of the non-Hermitian optical parametric system into four distinct quadrants, representing unbroken/broken anti-PT symmetry and amplification/attenuation, and amplification-attenuation boundaries and exceptional lines can be observed in such parametric space. Through simulations of the dynamical behavior of the interacting waves, we demonstrated the rich evolutions of the signal and idler waves in systems belonging to the respective quadrants and near exceptional points, revealed by the unique performance of eigenmodes. Our findings provide insights into the evaluation of energy flow direction in optical parametric amplification engineering by the directly linked parameter space, which contribute to a deeper understanding of photonics and laser science, potentially leading to new applications in these fields.
△ Less
Submitted 16 October, 2023;
originally announced October 2023.
-
Scientific Machine Learning Framework to Understand Flash Graphene Synthesis
Authors:
Kianoosh Sattari,
Lucas Eddy,
Jacob L. Beckham,
Kevin M. Wyss,
Richard Byfield,
Long Qian,
James M. Tour,
Jian Lin
Abstract:
Flash Joule heating (FJH) is a far-from-equilibrium (FFE) processing method for converting low-value carbon-based materials to flash graphene (FG). Despite its promise in scalability and performance, attempts to explore the reaction mechanism have been limited due to complexity involved in the FFE process. Data-driven machine learning (ML) models effectively account for this complexity, but the mo…
▽ More
Flash Joule heating (FJH) is a far-from-equilibrium (FFE) processing method for converting low-value carbon-based materials to flash graphene (FG). Despite its promise in scalability and performance, attempts to explore the reaction mechanism have been limited due to complexity involved in the FFE process. Data-driven machine learning (ML) models effectively account for this complexity, but the model training requires considerable amount of experimental data. To tackle this challenge, we constructed a scientific ML (SML) framework trained by using both direct processing variables and indirect, physics-informed variables to predict the FG yield. The indirect variables include current-derived features (final current, maximum current, and charge density) predicted from the proxy ML models and reaction temperatures simulated from multi-physics modeling. With the combined indirect features, the final ML model achieves an average R2 score of 0.81 +/- 0.05 and an average RMSE of 12.1% +/- 2.0% in predicting the FG yield, which is significantly higher than the model trained without them (R2 of 0.73 +/- 0.05 and an RMSE of 14.3% +/- 2.0%). Feature importance analysis validates the key roles of these indirect features in determining the reaction outcome. These results illustrate the promise of this SML to elucidate FFE material synthesis outcomes, thus paving a new avenue to processing other datasets from the materials systems involving the same or different FFE processes.
△ Less
Submitted 22 March, 2023;
originally announced March 2023.
-
Direct ultrafast parametric amplification pumped by a picosecond thin-disk laser
Authors:
**g Wang,
Peng Yuan,
Dongfang Zhang,
Guoqiang Xie,
Kainan Xiong,
Xiaoniu Tu,
Yanqing Zheng,
**gui Ma,
Liejia Qian
Abstract:
Optical quadratic nonlinearity is ultrafast in nature, while parametric interaction usually manifests only the broadband characteristic. Enormous progress has been made toward broadband phase-matching for parametric amplification and wide applications. In existing devices of broadband parametric amplification, the power efficiency of conversion is restricted to approximately the energy efficiency,…
▽ More
Optical quadratic nonlinearity is ultrafast in nature, while parametric interaction usually manifests only the broadband characteristic. Enormous progress has been made toward broadband phase-matching for parametric amplification and wide applications. In existing devices of broadband parametric amplification, the power efficiency of conversion is restricted to approximately the energy efficiency, and the desire for the signal power enhancement necessitates additional pulse compression after amplification. Here, we demonstrate ultrafast parametric amplification having an extraordinary power efficiency of 1155%; this allows the generation of intense femtosecond pulses without the need for a pulse stretcher and compressor. Direct femtosecond signal amplification by picosecond pum** is enabled by an ultrafast parametric environment in which the pre-delayed signal of faster speed gradually overtakes and effectively depletes the pump of slower speed as they propagate in a nonlinear crystal. The demonstrated technique should lead to breakthroughs in ultrafast lasers as well as applications.
△ Less
Submitted 16 June, 2022;
originally announced June 2022.
-
Spatio-Temporal Coupling Controlled Laser for Electron Acceleration
Authors:
Lu Wang,
Uwe Niedermayer,
**gui Ma,
Weihao Liu,
Dongfang Zhang,
Liejia Qian
Abstract:
Limited by the difficulty in acceleration synchronization, it has been a long-term challenge for on-chip dielectric laser-based accelerators (DLA) to bridge the gap between non-relativistic and relativistic regimes. Here, we propose a DLA based on a spatio-temporal coupling (STC) controlled laser pulse, which enables the acceleration of a non-relativistic electron to a sub-MeV level in a single ac…
▽ More
Limited by the difficulty in acceleration synchronization, it has been a long-term challenge for on-chip dielectric laser-based accelerators (DLA) to bridge the gap between non-relativistic and relativistic regimes. Here, we propose a DLA based on a spatio-temporal coupling (STC) controlled laser pulse, which enables the acceleration of a non-relativistic electron to a sub-MeV level in a single acceleration structure (chirped spatial grating). It provides high precision temporal and spatial tuning of the driving laser via the dispersion manipulation, leading to a synchronous acceleration of the velocity increasing electrons over a large energy range. Additionally, the STC scheme is a general method and can be extended to driving fields of other wavelengths such as terahertz pulses. Our results bring new possibilities to MeV-scale portable electron sources and table-top acceleration experiments.
△ Less
Submitted 31 January, 2022; v1 submitted 30 January, 2022;
originally announced January 2022.
-
In Vivo Assessment of Hypertensive Nephrosclerosis Using Ultrasound Localization Microscopy
Authors:
L. Qiu,
J. Zhang,
Y. Yang,
H. Zhang,
F. Lee,
Q. He,
L. Qian,
J. Luo
Abstract:
Purpose: As a typical chronic kidney disease (CKD), hypertensive nephrosclerosis (HN) is a common syndrome of hypertension, characterized by chronic kidney microvascular damage. Early diagnosis of microvascular damage using conventional ultrasound imaging encounters challenges in sensitivity and specificity owing to the inherent diffraction limit. Ultrasound localization microscopy (ULM) has been…
▽ More
Purpose: As a typical chronic kidney disease (CKD), hypertensive nephrosclerosis (HN) is a common syndrome of hypertension, characterized by chronic kidney microvascular damage. Early diagnosis of microvascular damage using conventional ultrasound imaging encounters challenges in sensitivity and specificity owing to the inherent diffraction limit. Ultrasound localization microscopy (ULM) has been developed to obtain microvasculature and microvascular hemodynamics within the kidney, and would be a promising tool for early diagnosis of CKD.
Methods: In this study, the advantage of ULM over conventional clinical inspection (serum and urine tests) and ultrasound imaging (Doppler and contrast-enhanced ultrasound imaging) for early diagnosis of HN was investigated. Examinations were carried out on 6 spontaneously hypertensive rats (SHR) and 5 normal Wistar-Kyoto (WKY) rats at the age of 10 weeks.
Results: The experimental results showed that the indicators derived from conventional clinical inspection and ultrasound imaging (PSV, EDV, RI, RT, IMAX, mTT and AUC) did not show significant difference between hypertensive and healthy rats (p > 0.05), while the TTP derived from CEUS (p < 0.05) and the mean blood flow speed in artery of SHR derived from ULM is significantly higher than that of WKY rats (p < 0.01).
Conclusion: The quantitative results showed that ULM has higher sensitivity than conventional clinical inspection and ultrasound imaging. ULM may promise a reliable solution for early diagnosis of HN.
△ Less
Submitted 5 October, 2021;
originally announced October 2021.
-
Enhanced photogalvanic effect in the two-dimensional MgCl$_2$/ZnBr$_2$ vertical heterojunction by inhomogenous tensile stress
Authors:
Liyu Qian,
Juan Zhao,
Yiqun Xie
Abstract:
The photogalvanic effect (PGE) occurring in noncentrosymmetric materials enables the generation of a dc photocurrent at zero bias with a high polarization sensitivity, which makes it very attractive in photodetection. However, the magnitude of the PGE photocurrent is usually small, leading to a low photoresponsivity, and therefore hampers its practical application in photodetection. Here, we propo…
▽ More
The photogalvanic effect (PGE) occurring in noncentrosymmetric materials enables the generation of a dc photocurrent at zero bias with a high polarization sensitivity, which makes it very attractive in photodetection. However, the magnitude of the PGE photocurrent is usually small, leading to a low photoresponsivity, and therefore hampers its practical application in photodetection. Here, we propose an approach to largely enhancing the PGE photocurrent by applying an inhomogenous mechanical stretch, based on quantum transport simulations. We model a two-dimensional photodetector consisting of the wide-bandgap MgCl$_2$/ZnBr$_2$ vertical van der Waals heterojunction with the noncentrosymmetric $C_{3v}$ symmetry. Polarization-sensitive PGE photocurrent is generated under the vertical illumination of linearly polarized light. By applying inhomogenous mechanical stretch on the lattice, the photocurrent can be largely increased by up to 3 orders of magnitude due to the significantly increased device asymmetry. Our results propose an effective way to enhance the PGE by inhomogenous mechanical strain, showing the potential of the MgCl$_2$/ZnBr$_2$ vertical heterojunction in the low-power UV photodetection.
△ Less
Submitted 25 June, 2021;
originally announced June 2021.
-
Experiment on scalable multi-user twin-field quantum key distribution network
Authors:
Xiaoqing Zhong,
Wenyuan Wang,
Reem Mandil,
Hoi-Kwong Lo,
Li Qian
Abstract:
Twin-field quantum key distribution (TFQKD) systems have shown great promise for implementing practical long-distance secure quantum communication due to its measurement-device-independent nature and its ability to offer fundamentally superior rate-loss scaling than point-to-point QKD systems. A surge of research and development effort in the last two years has produced many variants of protocols…
▽ More
Twin-field quantum key distribution (TFQKD) systems have shown great promise for implementing practical long-distance secure quantum communication due to its measurement-device-independent nature and its ability to offer fundamentally superior rate-loss scaling than point-to-point QKD systems. A surge of research and development effort in the last two years has produced many variants of protocols and experimental demonstrations. In terms of hardware topology, TFQKD systems interfering quantum signals from two remotely phase-locked laser sources are in essence giant Mach-Zehnder interferometers (MZIs) requiring active phase stabilization. Such configurations are inherently unsuitable for a TFQKD network, where more than one user-pair share the common quantum measurement station, because it is practically extremely difficult, if not impossible, to stabilize MZIs of largely disparate path lengths, a situation that is inevitable in a multi-user-pair TFQKD network. On the other hand, Sagnac interferometer based TFQKD systems exploiting the inherent phase stability of the Sagnac ring can implement asymmetric TFQKD, and are therefore eminently suitable for implementing a TFQKD network. In this work, we experimentally demonstrate a proof-of-principle multi-user-pair Sagnac TFQKD network where three user pairs sharing the same measurement station can perform pair-wise TFQKD through time multiplexing, with channel losses up to 58 dB, and channel loss asymmetry up to 15 dB. In some cases, the secure key rates still beat the rate-loss bounds for point-to-point repeaterless QKD systems, even in this network configuration. It is to our knowledge the first multi-user-pair TFQKD network demonstration, an important step in advancing quantum communication network technologies.
△ Less
Submitted 14 June, 2021;
originally announced June 2021.
-
Real-time ultrasound sensing with a mode-optimized photonic crystal slab
Authors:
Eric Y. Zhu,
Maria Charles-Herrera,
Cory Rewcastle,
Raanan Gad,
Li Qian,
Ofer Levi
Abstract:
Integrated photonic sensors can provide large scale, flexible detection schemes. Photonic crystal slabs (PCS) offer a miniaturized platform for wideband, sensitive ultrasound detection by exploiting the photoelastic effect in water. However, poor modal overlap with the sensing medium and non-negligible absorption loss of the aqueous medium have previously limited PCS sensor performance. In this st…
▽ More
Integrated photonic sensors can provide large scale, flexible detection schemes. Photonic crystal slabs (PCS) offer a miniaturized platform for wideband, sensitive ultrasound detection by exploiting the photoelastic effect in water. However, poor modal overlap with the sensing medium and non-negligible absorption loss of the aqueous medium have previously limited PCS sensor performance. In this study, we detail the development and optimization of a PCS-based acoustic sensor, by adding to it a low-loss high-index polymer cladding layer. Exploiting a mode-optimized TM-like optical resonance present in a PCS, with high bulk index sensitivity (>600 nm/RIU) and quality factor Q (>8000), we demonstrate real-time ultrasound-sensing at a noise equivalent pressure (NEP) of 170 Pa (1.9 Pa/rt Hz). The PCS sensor is backside-coupled to optical fiber which, along with its intensity-based ultrasound-sensing architecture, will allow us to scale up easily to a 2D array. This work paves the way to a sensitive compact ultrasound detector for photoacoustic-based diagnostics and monitoring of tissue.
△ Less
Submitted 14 August, 2021; v1 submitted 2 May, 2021;
originally announced May 2021.
-
Sub-MHz spectral dip in a resonator-free twisted gain medium
Authors:
Neel Choksi,
Yi Liu,
Ro**a Ghasemi,
Li Qian
Abstract:
Ultra-narrow optical spectral features resulting from highly dispersive light-matter interactions are essential for a broad range of applications such as spectroscopy, slow-light, and high-precision sensing. Features approaching sub-MHz, or equivalently, Q-factors approaching ~1 billion and beyond, are challenging to obtain in solid-state systems, ultimately limited by loss. We present a novel app…
▽ More
Ultra-narrow optical spectral features resulting from highly dispersive light-matter interactions are essential for a broad range of applications such as spectroscopy, slow-light, and high-precision sensing. Features approaching sub-MHz, or equivalently, Q-factors approaching ~1 billion and beyond, are challenging to obtain in solid-state systems, ultimately limited by loss. We present a novel approach to achieve tunable sub-MHz spectral features, at room temperature, without resonators. We exploit gain-enhanced polarization pulling in a twisted birefringent medium where polarization eigenmodes are frequency-dependent. Using Brillouin gain in a commercial spun fiber, we experimentally achieve a 0.72 MHz spectral dip, the narrowest backward Brillouin scattering feature ever reported. Further optimization can potentially reduce the linewidth to <0.1 MHz. Our approach is simple and broadly applicable, offering on-demand tunability and high sensitivity, with a wide range of applications such as microwave photonic filters, slow and fast light, and optical sensing.
△ Less
Submitted 8 May, 2022; v1 submitted 11 April, 2021;
originally announced April 2021.
-
Resolving ultrahigh-contrast ultrashort pulses with single-shot cross-correlator at the photon noise limit
Authors:
**gui Ma,
Peng Yuan,
** Ouyang,
**g Wang,
Guoqiang Xie,
Liejia Qian
Abstract:
In strong-field physics experiments with intense lasers, it is of paramount importance to single-shot diagnose the temporal contrast between laser pulse peak and its noise pedestal. This allows fast optimization of pulse contrast and meaningful comparison with theory for each pulse shot, and it can help new outcomes from clean laser-plasma interactions. Thus far, high contrast ratios up to ~10^10,…
▽ More
In strong-field physics experiments with intense lasers, it is of paramount importance to single-shot diagnose the temporal contrast between laser pulse peak and its noise pedestal. This allows fast optimization of pulse contrast and meaningful comparison with theory for each pulse shot, and it can help new outcomes from clean laser-plasma interactions. Thus far, high contrast ratios up to ~10^10, required by present petawatt (PW) class lasers, have been accessible in both generation and single-shot characterization. However, ultrahigh contrast ~10^13, required by the planned 200-PW lasers, challenges intense laser technology and remains an open question. This paper reports on the first demonstration of such an ultrahigh-contrast measurement by adapting single-shot cross-correlator (SSCC). We introduce an ultrafast method that enables to determine the SSCC detection limit. Our strategy mimics the test laser having known ultrahigh contrast in the measurement frame of time-to-space map**. The ultimate contrast-measurement limit of 10^13 is achieved, which corresponds to the highest pulse intensity set by SSCC damage threshold and the lowest noise pedestal set by single-photon detection. As a consequence, photon noise in the detection is observed and increases as the noise pedestal reduces. The demonstrated measurement ability at the photon noise limit is applied to a high-contrast laser system based on second-harmonic generation and optical parametric chirped-pulse amplification, suggesting accessible of ultrahigh contrast pulses.
△ Less
Submitted 25 February, 2021;
originally announced February 2021.
-
High-temperature and Abrasion Resistant Selective Solar Absorber under Ambient Environment
Authors:
Yanpei Tian,
Lijuan Qian,
Xiaojie Liu,
Alok Ghanekar,
Jun Liu,
Thomas Thundat,
Gang Xiao,
Yi Zheng
Abstract:
Selective solar absorbers (SSAs) with high performance are the key to concentrated solar power systems. Optical metamaterials are emerging as a promising strategy to enhance selective photon absorption, however, the high-temperature resistance (>500C) remains as one of the main challenges for their practical applications. Here, a multilayered metamaterial system (Al2O3/W/SiO2/W) based on metal-ins…
▽ More
Selective solar absorbers (SSAs) with high performance are the key to concentrated solar power systems. Optical metamaterials are emerging as a promising strategy to enhance selective photon absorption, however, the high-temperature resistance (>500C) remains as one of the main challenges for their practical applications. Here, a multilayered metamaterial system (Al2O3/W/SiO2/W) based on metal-insulator-metal (MIM) resonance effect has been demonstrated with high solar absorptance over 92%, low thermal emittance loss below 6%, and significant high-temperature resistance: it has been proved that the optical performance remains 93.6% after 1-hour thermal annealing under ambient environment up to 500C, and 94.1% after 96-hour thermal cycle test at 400C, which is also confirmed by the microscopic morphology characterization. The spectral selectivity of fabricated SSAs is angular independent and polarization insensitive. Outdoor tests demonstrate that a peak temperature rise (193.5C) can be achieved with unconcentrated solar irradiance and surface abrasion resistance test yields that SSAs have a robust resistance to abrasion attack for engineering applications.
△ Less
Submitted 28 May, 2020;
originally announced May 2020.
-
Efficient experimental quantum fingerprinting with wavelength division multiplexing
Authors:
Xiaoqing Zhong,
Feihu Xu,
Hoi-Kwong Lo,
Li Qian
Abstract:
Quantum communication complexity studies the efficiency of information communication (that is, the minimum amount of communication required to achieve a certain task) using quantum states. One representative example is quantum fingerprinting, in which the simultaneous message passing model is considered and the minimum amount of communication could be exponentially smaller than the classical finge…
▽ More
Quantum communication complexity studies the efficiency of information communication (that is, the minimum amount of communication required to achieve a certain task) using quantum states. One representative example is quantum fingerprinting, in which the simultaneous message passing model is considered and the minimum amount of communication could be exponentially smaller than the classical fingerprinting protocol. Experimental demonstrations based on a practical quantum fingerprinting protocol where coherent states are used to construct the fingerprints, have successfully shown the superiority of quantum fingerprinting. However, as a consequence of using coherent states, the communication time in this coherent quantum fingerprinting (CQF) protocol is increased. Moreover, the minimum amount of information communicated in these experimental demonstrations is largely limited by the dark counts of the single photon detectors. Here, we propose to enhance the performance of the existing CQF protocol through applying wavelength division multiplexing (WDM) and simultaneous detection of multiple wavelength channels. We show that the new WDM-CQF protocol can potentially reduce the communication time significantly. More importantly, with the same experimental parameters, the amount of communication is much reduced in the new scheme compared with the original CQF protocol. The more wavelength channels are used, the less communication is required by WDM-CQF protocol. We also perform a proof-of-concept experimental demonstration of the new WDM-CQF protocol with 6 wavelength channels. The experimental results further validate that the new scheme with WDM not only beats the classical protocol, but also reduces the amount of communication required by the original CQF protocol by more than half.
△ Less
Submitted 12 May, 2020;
originally announced May 2020.
-
Proof-of-principle experimental demonstration of twin-field quantum key distribution over optical channels with asymmetric losses
Authors:
Xiaoqing Zhong,
Wenyuan Wang,
Li Qian,
Hoi-Kwong Lo
Abstract:
Twin-field (TF) quantum key distribution (QKD) is highly attractive because it can beat the fundamental limit of secret key rate for point-to-point QKD without quantum repeaters. Many theoretical and experimental studies have shown the superiority of TFQKD in long-distance communication. All previous experimental implementations of TFQKD have been done over optical channels with symmetric losses.…
▽ More
Twin-field (TF) quantum key distribution (QKD) is highly attractive because it can beat the fundamental limit of secret key rate for point-to-point QKD without quantum repeaters. Many theoretical and experimental studies have shown the superiority of TFQKD in long-distance communication. All previous experimental implementations of TFQKD have been done over optical channels with symmetric losses. But in reality, especially in a network setting, the distances between users and the middle node could be very different. In this paper, we perform a first proof-of-principle experimental demonstration of TFQKD over optical channels with asymmetric losses. We compare two compensation strategies, that are (1) applying asymmetric signal intensities and (2) adding extra losses, and verify that strategy (1) provides much better key rate. Moreover, the higher the loss, the more key rate enhancement it can achieve. By applying asymmetric signal intensities, TFQKD with asymmetric channel losses not only surpasses the fundamental limit of key rate of point-to-point QKD for 50 dB overall loss, but also has key rate as high as $2.918\times10^{-6}$ for 56 dB overall loss. Whereas no keys are obtained with strategy (2) for 56 dB loss. The increased key rate and enlarged distance coverage of TFQKD with asymmetric channel losses guarantee its superiority in long-distance quantum networks.
△ Less
Submitted 28 January, 2020;
originally announced January 2020.
-
Biphoton sha** with cascaded entangled-photon sources
Authors:
Arash Riazi,
Changjia Chen,
Eric Y. Zhu,
Alexey V. Gladyshev,
Peter G. Kazansky,
J. E. Sipe,
L. Qian
Abstract:
Quantum entanglement is an integral part of quantum optics and has been exploited in areas such as computation, cryptography and metrology. The entanglement between photons can be present in various degrees of freedom (DOFs), and even the simplest bi-partite systems can occupy a large Hilbert space. Therefore, it is desirable to exploit this multi-dimensional space for various quantum applications…
▽ More
Quantum entanglement is an integral part of quantum optics and has been exploited in areas such as computation, cryptography and metrology. The entanglement between photons can be present in various degrees of freedom (DOFs), and even the simplest bi-partite systems can occupy a large Hilbert space. Therefore, it is desirable to exploit this multi-dimensional space for various quantum applications by fully controlling the properties of the entangled photons in multiple DOFs. While current entangled-photon sources are capable of generating entanglement in one or more DOFs, there is currently a lack of practical techniques that can shape and control the entanglement properties in multiple DOFs. Here we show that cascading two or more entangled-photon sources with tunable linear media in between allows us to generate photon-pairs whose entanglement properties can be tailored and shaped in the frequency and polarisation domains. We first develop a quantum mechanical model to study the quantum state generated from the cascade structure with special considerations paid to the effects of pump temporal coherence, linear dispersion, and in-structure polarisation transformation applied between the entangled-photon sources. We then experimentally generate photon-pairs with tunable entanglement properties by manipulating the dispersion and birefringence properties of the linear medium placed in between two entangled-photon sources. This is done in an all-fibre, phase stable, and alignment-free configuration. Our results show that the cascade structure offers a great deal of flexibility in tuning the properties of entangled photons in multiple DOFs, opening up a new avenue in engineering quantum light sources.
△ Less
Submitted 8 September, 2019;
originally announced September 2019.
-
Alignment-free dispersion measurement with interfering biphotons
Authors:
Arash Riazi,
Eric Y. Zhu,
Changjia Chen,
Alexey V. Gladyshev,
Peter G. Kazansky,
Li Qian
Abstract:
Measuring the dispersion of photonic devices with small dispersion-length products is challenging due to the phase-sensitive, and alignment-intensive nature of conventional methods. In this letter, we demonstrate a quantum technique to extract the second-, and third-order chromatic dispersion of a short single-mode fiber using a fiber-based quantum nonlinear interferometer. The interferometer cons…
▽ More
Measuring the dispersion of photonic devices with small dispersion-length products is challenging due to the phase-sensitive, and alignment-intensive nature of conventional methods. In this letter, we demonstrate a quantum technique to extract the second-, and third-order chromatic dispersion of a short single-mode fiber using a fiber-based quantum nonlinear interferometer. The interferometer consists of two cascaded fiber-based biphoton sources, with each source acting as a nonlinear beamsplitter. A fiber under test is placed in between these two sources, and introduces a frequency-dependent phase that is imprinted upon the biphoton spectrum (interferogram) at the output of the interferometer. This interferogram contains within it the dispersion properties of the test fiber. Our technique has three novel features: (1) The broadband nature of the biphoton sources used in our setup allows accurate dispersion measurements on test devices with small dispersion-length products; (2) our all-fiber common-path interferometer requires no beam alignment or phase stabilization; (3) multiple phase-matching processes supported in our biphoton sources enables dispersion measurements at different wavelengths, which yields the third-order dispersion, achieved for the first time using a quantum optical technique.
△ Less
Submitted 7 July, 2019; v1 submitted 18 March, 2019;
originally announced March 2019.
-
Refractive-Index-based ultrasound sensing with photonic crystal slabs
Authors:
Eric Y. Zhu,
Cory Rewcastle,
Raanan Gad,
Li Qian,
Ofer Levi
Abstract:
We demonstrate ultrasound detection with 500-$μ\mathrm{m}$-diameter photonic-crystal slab (PCS) sensors fabricated from CMOS-compatible technology. An ultrasound signal im**ing a PCS sensor causes a local modulation of the refractive index (RI) of the medium (water) in which the PCS is immersed, resulting in a periodic spectral shift of the optical resonance of the PCS. The acoustic sensitivity…
▽ More
We demonstrate ultrasound detection with 500-$μ\mathrm{m}$-diameter photonic-crystal slab (PCS) sensors fabricated from CMOS-compatible technology. An ultrasound signal im**ing a PCS sensor causes a local modulation of the refractive index (RI) of the medium (water) in which the PCS is immersed, resulting in a periodic spectral shift of the optical resonance of the PCS. The acoustic sensitivity is found to scale with the index sensitivity $S$ and quality factor $Q$. A noise equivalent pressure (NEP) of 650 Pa with averaging (7.4 Pa$/\sqrt{\mathrm{Hz}}$) and relative wavelength shifts of up to 4.3$\times10^{-5}$ MPa$^{-1}$ are measured. The frequency response of the sensors is observed to be flat from 1-20 MHz, with the range limited only by our measurement apparatus.
△ Less
Submitted 8 June, 2019; v1 submitted 30 October, 2018;
originally announced December 2018.
-
Turn-Key Diode-Pumped All-Fiber Broadband Polarization-Entangled Photon Source
Authors:
Changjia Chen,
Arash Riazi,
Eric Y. Zhu,
Mili Ng,
Alexey V. Gladyshev,
Peter G. Kazansky,
Li Qian
Abstract:
In this letter, we report a compact, low-power laser diode-pumped, all-fiber polarization-entangled photon pair source based on periodically-poled silica fiber technology. The all-fiber source offers room-temperature, alignment-free, turn-key operation, with low power consumption, and is packaged into a fanless, portable enclosure. It features a broad biphoton spectrum of more than 100nm with a co…
▽ More
In this letter, we report a compact, low-power laser diode-pumped, all-fiber polarization-entangled photon pair source based on periodically-poled silica fiber technology. The all-fiber source offers room-temperature, alignment-free, turn-key operation, with low power consumption, and is packaged into a fanless, portable enclosure. It features a broad biphoton spectrum of more than 100nm with a concurrence that is greater than 0.96 for polarization entanglement. The source is stable over at least 10 hours of continuous operation, achieving coincidence-to-accidental ratios of more than 2000 consistently over this time period.
△ Less
Submitted 2 November, 2018; v1 submitted 4 October, 2018;
originally announced October 2018.
-
Asymptotic nonlinear and dispersive pulsatile flow in elastic vessels with cylindrical symmetry
Authors:
Dimitrios Mitsotakis,
Denys Dutykh,
Li Qian
Abstract:
The asymptotic derivation of a new family of one-dimensional, weakly nonlinear and weakly dispersive equations that model the flow of an ideal fluid in an elastic vessel is presented. Dissipative effects due to the viscous nature of the fluid are also taken into account. The new models validate by asymptotic reasoning other non-dispersive systems of equations that are commonly used, and improve ot…
▽ More
The asymptotic derivation of a new family of one-dimensional, weakly nonlinear and weakly dispersive equations that model the flow of an ideal fluid in an elastic vessel is presented. Dissipative effects due to the viscous nature of the fluid are also taken into account. The new models validate by asymptotic reasoning other non-dispersive systems of equations that are commonly used, and improve other nonlinear and dispersive mathematical models derived to describe the blood flow in elastic vessels. The new systems are studied analytically in terms of their basic characteristic properties such as the linear dispersion characteristics, symmetries, conservation laws and solitary waves. Unidirectional model equations are also derived and analysed in the case of vessels of constant radius. The capacity of the models to be used in practical problems is being demonstrated by employing a particular system with favourable properties to study the blood flow in a large artery. Two different cases are considered: A vessel with constant radius and a tapered vessel. Significant changes in the flow can be observed in the case of the tapered vessel.
△ Less
Submitted 4 April, 2018;
originally announced April 2018.
-
Black phosphorus Q-switched and mode-locked Er:ZBLAN fiber lasers at 3.5 um
Authors:
Zhipeng Qin,
Ting Hai,
Guoqiang Xie,
**gui Ma,
Peng Yuan,
Liejia Qian,
Lei Li,
Luming Zhao,
Deyuan Shen
Abstract:
With the proposal of dual-wavelength pum** (DWP) scheme, DWP Er:ZBLAN fiber lasers at 3.5 um have become a fascinating area of research. However, limited by the absence of suitable saturable absorber, passively Q-switched and mode-locked fiber lasers have not been realized in this spectral region. Based on the layer-dependent bandgap and excellent photoelectric characteristics of black phosphoru…
▽ More
With the proposal of dual-wavelength pum** (DWP) scheme, DWP Er:ZBLAN fiber lasers at 3.5 um have become a fascinating area of research. However, limited by the absence of suitable saturable absorber, passively Q-switched and mode-locked fiber lasers have not been realized in this spectral region. Based on the layer-dependent bandgap and excellent photoelectric characteristics of black phosphorus (BP), BP is a promising candidate for saturable absorber near 3.5 um. Here, we fabricated a 3.5-um saturable absorber mirror (SAM) by transferring liquid-phase exfoliated BP flakes onto a gold-coated mirror. With the as-prepared BP SAM, we realized stable Q-switching and continuous-wave mode-locking operations in the DWP Er:ZBLAN fiber lasers at 3.5 um. To the best of our knowledge, it is the first time to achieve passively Q-switched and mode-locked pulses in 3.5 um spectral region. The research results will not only promote the development of 3.5-um pulsed fiber lasers but also open the photonic application of two-dimensional materials in this spectral region
△ Less
Submitted 2 February, 2018;
originally announced February 2018.
-
Evaluation of the Interplanetary Magnetic Field Strength Using the Cosmic-Ray Shadow of the Sun
Authors:
M. Amenomori,
X. J. Bi,
D. Chen,
T. L. Chen,
W. Y. Chen,
S. W. Cui,
Danzengluobu,
L. K. Ding,
C. F. Feng,
Zhaoyang Feng,
Z. Y. Feng,
Q. B. Gou,
Y. Q. Guo,
H. H. He,
Z. T. He,
K. Hibino,
N. Hotta,
Haibing Hu,
H. B. Hu,
J. Huang,
H. Y. Jia,
L. Jiang,
F. Ka**o,
K. Kasahara,
Y. Katayose
, et al. (58 additional authors not shown)
Abstract:
We analyze the Sun's shadow observed with the Tibet-III air shower array and find that the shadow's center deviates northward (southward) from the optical solar disc center in the "Away" ("Toward") IMF sector. By comparing with numerical simulations based on the solar magnetic field model, we find that the average IMF strength in the "Away" ("Toward") sector is…
▽ More
We analyze the Sun's shadow observed with the Tibet-III air shower array and find that the shadow's center deviates northward (southward) from the optical solar disc center in the "Away" ("Toward") IMF sector. By comparing with numerical simulations based on the solar magnetic field model, we find that the average IMF strength in the "Away" ("Toward") sector is $1.54 \pm 0.21_{\rm stat} \pm 0.20_{\rm syst}$ ($1.62 \pm 0.15_{\rm stat} \pm 0.22_{\rm syst}$) times larger than the model prediction. These demonstrate that the observed Sun's shadow is a useful tool for the quantitative evaluation of the average solar magnetic field.
△ Less
Submitted 21 January, 2018;
originally announced January 2018.
-
Coupled THINC and level set method: a conservative interface capturing scheme with arbitrary-order surface representations
Authors:
Longgen Qian,
Yanhong Wei,
Feng Xiao
Abstract:
In this paper, we propose a simple and accurate numerical method for capturing moving interfaces on fixed Eulerian grids by coupling the Tangent of Hyperbola Interface Capturing (THINC) method and Level Set (LS) method. The innovative and practically-significant aspects of the proposed method, so-called THINC/LS method, lie in (1) representing the interface with polynomial of arbitrary-order rathe…
▽ More
In this paper, we propose a simple and accurate numerical method for capturing moving interfaces on fixed Eulerian grids by coupling the Tangent of Hyperbola Interface Capturing (THINC) method and Level Set (LS) method. The innovative and practically-significant aspects of the proposed method, so-called THINC/LS method, lie in (1) representing the interface with polynomial of arbitrary-order rather than the plane representation commonly used in the Piecewise Linear Interface Calculation (PLIC) Volume of fluid (VOF) methods, (2) conserving rigorously the mass of the transported VOF field, and (3) providing a straightforward and easy-to-code algorithm for implementation. We verified the proposed scheme with the widely used benchmark tests. Numerical results show that this new method can obtain arbitrary-order accuracy for interface reconstruction and can produce more accurate results than the classical VOF methods.
△ Less
Submitted 7 January, 2018;
originally announced January 2018.
-
Diode-pumped mode-locked femtosecond 2-um Tm:CaYAlO4 laser
Authors:
Lingchen Kong,
Guoqiang Xie,
Zhipeng Qin,
Xiaodong Xu,
Jun Xu,
Peng Yuan,
Liejia Qian
Abstract:
Continuous-wave mode-locked femtosecond 2 um solid-state laser with a c-cut Tm:CaYAlO4 as gain medium was experimentally demonstrated. The mode locked laser generated stable pulses with average output power as high as 531 mW, pulse duration of 496 fs, and repetition rate of 97 MHz at 1975 nm. The research results show that Tm:CaYAlO4 is an excellent gain medium for femtosecond pulse generation at…
▽ More
Continuous-wave mode-locked femtosecond 2 um solid-state laser with a c-cut Tm:CaYAlO4 as gain medium was experimentally demonstrated. The mode locked laser generated stable pulses with average output power as high as 531 mW, pulse duration of 496 fs, and repetition rate of 97 MHz at 1975 nm. The research results show that Tm:CaYAlO4 is an excellent gain medium for femtosecond pulse generation at 2um wavelength.
△ Less
Submitted 12 July, 2017;
originally announced July 2017.
-
Polarization-entangled photon pair sources based on spontaneous four wave mixing assisted by polarization mode dispersion
Authors:
Pisek Kultavewuti,
Eric Y. Zhu,
Xingxing Xing,
Li Qian,
Vincenzo Pusino,
Marc Sorel,
J. Stewart Aitchison
Abstract:
Photonic-based qubits and integrated photonic circuits have enabled demonstrations of quantum information processing (QIP) that promises to transform the way in which we compute and communicate. To that end, sources of polarization-entangled photon pair states are an important enabling technology, especially for polarization-based protocols. However, such states are difficult to prepare in an inte…
▽ More
Photonic-based qubits and integrated photonic circuits have enabled demonstrations of quantum information processing (QIP) that promises to transform the way in which we compute and communicate. To that end, sources of polarization-entangled photon pair states are an important enabling technology, especially for polarization-based protocols. However, such states are difficult to prepare in an integrated photonic circuit. Scalable semiconductor sources typically rely on nonlinear optical effects where polarization mode dispersion (PMD) degrades entanglement. Here, we directly generate polarization-entangled states in an AlGaAs waveguide, aided by the PMD and without any compensation steps. We perform quantum state tomography and report a raw concurrence as high as 0.91$\pm$0.01 observed in the 1100-nm-wide waveguide. The scheme allows direct Bell state generation with an observed maximum fidelity of 0.90$\pm$0.01 from the 800-nm-wide waveguide. Our demonstration paves the way for sources that allow for the implementation of polarization-encoded protocols in large-scale quantum photonic circuits.
△ Less
Submitted 6 March, 2017;
originally announced March 2017.
-
High-Contrast Chirped-Pulse Amplification Enabled by In-Band Noise Filtering
Authors:
**g Wang,
**gui Ma,
Peng Yuan,
Daolong Tang,
Guoqiang Xie,
Liejia Qian,
Frank W. Wise
Abstract:
Lasers that generate ultra-intense light pulses are under development for experiments in high-field and high-energy-density physics, as well as for applications such as particle acceleration. Extensions to even higher powers are being considered for future investigations that can only be imagined today, such as the quantum electrodynamics of plasmas and isolated attosecond-pulse generation with so…
▽ More
Lasers that generate ultra-intense light pulses are under development for experiments in high-field and high-energy-density physics, as well as for applications such as particle acceleration. Extensions to even higher powers are being considered for future investigations that can only be imagined today, such as the quantum electrodynamics of plasmas and isolated attosecond-pulse generation with solid targets. For all of these areas, it is vital to produce high-contrast pulses, so that no pre-plasma is created in the target before the arrival of the main pulse. However, noise is unavoidable in high-gain amplification, and is manifested in the form of background light that accompanies pulses generated by chirped-pulse amplification (CPA). Here, we introduce a linear filtering technique based on spatio-spectral coupling, which allows in-band filtering of amplified pulses for the first time. Experiments demonstrate approximately 40 times contrast enhancement in optical parametric chirped-pulse amplification (OPCPA) and provide a foundation for scaling to much higher performance. The simplicity, efficiency, and direct compatibility with existing techniques for short-pulse generation will make spatio-spectral filtering attractive to a wide range of applications in ultrafast optics and time-resolved spectroscopy, and may open new directions in noise reduction.
△ Less
Submitted 20 January, 2017;
originally announced January 2017.
-
Implement and commissioning of the beam energy feedback system in BEPCII linac
Authors:
Shaozhe Wang,
Yunlong Chi,
Rong Liu,
Xuefang Huang,
Lei Qian
Abstract:
In order to ensure the beam quality and meet the requirements introduced by the BEPCII storage ring, the beam energy feedback system has been developed at the exit of the linac. This paper describes the implementation and commissioning of this system in detail. The energy feedback system consists of an energy measurement unit, an application software and an execution unit. In order to ensure the r…
▽ More
In order to ensure the beam quality and meet the requirements introduced by the BEPCII storage ring, the beam energy feedback system has been developed at the exit of the linac. This paper describes the implementation and commissioning of this system in detail. The energy feedback system consists of an energy measurement unit, an application software and an execution unit. In order to ensure the real-time monitoring and adjustment of beam energy, we need to introduce a non-interceptive type of online beam energy measurement method which is on the first try in China and the effective mechanism of energy adjustment to achieve this goal. The adjustment of energy is achieved by adjusting the output microwave phase of the RF power source station. The system was put into operation in March 16th, 2016 and achieved the desired results. It can effectively eliminate the low point of the injection rate caused by the fluctuation of the beam center energy and has played an important role in maintaining a high constant injection rate.
△ Less
Submitted 4 October, 2016;
originally announced October 2016.
-
Correlated photon pair generation in AlGaAs nanowaveguides via spontaneous four-wave mixing
Authors:
Pisek Kultavewuti,
Eric Y. Zhu,
Li Qian,
Vincenzo Pusino,
Marc Sorel,
J. Stewart Aitchison
Abstract:
We demonstrate a source of correlated photon pairs which will have applications in future integrated quantum photonic circuits. The source utilizes spontaneous four-wave mixing (SFWM) in a dispersion-engineered nanowaveguide made of AlGaAs, which has merits of negligible two-photon absorption and low spontaneous Raman scattering (SpRS). We observe a coincidence-to-accidental (CAR) ratio up to 177,…
▽ More
We demonstrate a source of correlated photon pairs which will have applications in future integrated quantum photonic circuits. The source utilizes spontaneous four-wave mixing (SFWM) in a dispersion-engineered nanowaveguide made of AlGaAs, which has merits of negligible two-photon absorption and low spontaneous Raman scattering (SpRS). We observe a coincidence-to-accidental (CAR) ratio up to 177, mainly limited by propagation losses. Experimental results agree well with theoretical predictions of the SFWM photon pair generation and the SpRS noise photon generation. We also study the effects from the SpRS, propagation losses, and waveguide lengths on the quality of our source.
△ Less
Submitted 9 February, 2016;
originally announced February 2016.
-
Plasma optical modulators for intense lasers
Authors:
Lu-Le Yu,
Yao Zhao,
Lie-Jia Qian,
Min Chen,
Su-Ming Weng,
Zheng-Ming Sheng,
D. A. Jaroszynski,
W. B. Mori,
Jie Zhang
Abstract:
Optical modulators can be made nowadays with high modulation speed, broad bandwidth, while being compact, owing to the recent advance in material science and microfabrication technology. However, these optical modulators usually work for low intensity light beams. Here, we present an ultrafast, plasma-based optical modulator, which can directly modulate high power lasers with intensity up to 10^16…
▽ More
Optical modulators can be made nowadays with high modulation speed, broad bandwidth, while being compact, owing to the recent advance in material science and microfabrication technology. However, these optical modulators usually work for low intensity light beams. Here, we present an ultrafast, plasma-based optical modulator, which can directly modulate high power lasers with intensity up to 10^16 W/cm^2 level to produce an extremely broad spectrum with a fractional bandwidth over 100%, extending to the mid-infrared regime in the low-frequency side. This concept relies on two co-propagating laser beams in a sub-mm-scale underdense plasma, where a drive laser pulse first excites an electron plasma wave in its wake while a following carrier laser beam is modulated by the plasma wave. The laser and plasma parameters suitable for the modulator to work are presented. Such optical modulators may enable new applications in the high field physics.
△ Less
Submitted 26 January, 2016;
originally announced January 2016.
-
Generation of 30-fs pulses from a diode-pumped graphene mode-locked Yb:CaYAlO4 laser
Authors:
Jie Ma,
Haitao Huang,
Kaijie Ning,
Xiaodong Xu,
Guoqiang Xie,
Liejia Qian,
Kian ** Loh,
Dingyuan Tang
Abstract:
Stable 30 fs pulses centered at 1068 nm (less than 10 optical cycles) are demonstrated in a diode pumped Yb:CaYAlO4 laser by using high-quality chemical vapor deposited monolayer graphene as the saturable absorber. The mode locked 8.43 optical-cycle pulses have a spectral bandwidth of ~ 50 nm and a pulse repetition frequency of ~ 113.5 MHz. To our knowledge, this is the shortest pulse ever reporte…
▽ More
Stable 30 fs pulses centered at 1068 nm (less than 10 optical cycles) are demonstrated in a diode pumped Yb:CaYAlO4 laser by using high-quality chemical vapor deposited monolayer graphene as the saturable absorber. The mode locked 8.43 optical-cycle pulses have a spectral bandwidth of ~ 50 nm and a pulse repetition frequency of ~ 113.5 MHz. To our knowledge, this is the shortest pulse ever reported for graphene mode-locked lasers and mode-locked Yb-doped bulk lasers. Our experimental results demonstrate that graphene mode locking is a very promising practical technique to generate few-cycle optical pulses directly from a laser oscillator.
△ Less
Submitted 19 December, 2015;
originally announced December 2015.
-
Black phosphorus mode-locked Er-doped ZBLAN fiber laser at 2.8 um wavelength
Authors:
Zhipeng Qin,
Guoqiang Xie,
Chujun Zhao,
Shuangchun Wen,
Peng Yuan,
Liejia Qian
Abstract:
Mid-infrared saturable absorber mirror is successfully fabricated by transferring the mechanically exfoliated black phosphorus onto the gold-coated mirror. With the as-prepared black phosphorus saturable absorber mirror, a continuous-wave passively mode-locked Er:ZBLAN fiber laser is demonstrated at the wavelength of 2.8 um, which delivers a maximum average output power of 613 mW, a repetition rat…
▽ More
Mid-infrared saturable absorber mirror is successfully fabricated by transferring the mechanically exfoliated black phosphorus onto the gold-coated mirror. With the as-prepared black phosphorus saturable absorber mirror, a continuous-wave passively mode-locked Er:ZBLAN fiber laser is demonstrated at the wavelength of 2.8 um, which delivers a maximum average output power of 613 mW, a repetition rate of 24 MHz and a pulse duration of 42 ps. To the best of our knowledge, it is the first time to demonstrate black phosphorus mode-locked laser at 2.8 um wavelength. Our results demonstrate the feasibility of black phosphorus flake as a new two-dimensional material for application in mid-infrared ultrafast photonics.
△ Less
Submitted 22 September, 2015;
originally announced September 2015.
-
Multilayer black phosphorus as broadband saturable absorber for pulsed lasers from 1 to 2.7 μm wavelength
Authors:
Lingchen Kong,
Zhipeng Qin,
Guoqiang Xie,
Zhinan Guo,
Han Zhang,
Peng Yuan,
Liejia Qian
Abstract:
It attracts wide interest to seek universe saturable absorber covering wavelengths from near infrared to mid-infrared band. Multilayer black phosphorus, with variable direct bandgap (0.3-2 eV) depending on the layer number, becomes a good alternative as a universe saturable absorber for pulsed lasers. In this contribution, we first experimentally demonstrated broadband saturable absorption of mult…
▽ More
It attracts wide interest to seek universe saturable absorber covering wavelengths from near infrared to mid-infrared band. Multilayer black phosphorus, with variable direct bandgap (0.3-2 eV) depending on the layer number, becomes a good alternative as a universe saturable absorber for pulsed lasers. In this contribution, we first experimentally demonstrated broadband saturable absorption of multilayer black phosphorus from 1 μm to 2.7 μm wavelength. With the as-fabricated black phosphorus nanoflakes as saturable absorber, stable Q-switching operation of bulk lasers at 1.03 μm, 1.93 μm, 2.72 μm were realized, respectively. In contrast with large-bandgap semiconducting transition metal dichalcogenides, such as MoS2, MoSe2, multilayer black phosphorus shows particular advantage at the long wavelength regime thanks to its narrow direct bandgap. This work will open promising optoelectronic applications of black phosphorus in mid-infrared spectral region and further demonstrate that BP may fill the gap of between zero-bandgap graphene and large-bandgap TMDs.
△ Less
Submitted 18 August, 2015;
originally announced August 2015.
-
Black phosphorus as saturable absorber for the Q-switched Er:ZBLAN fiber laser at 2.8 μm
Authors:
Zhipeng Qin,
Guoqiang Xie,
Han Zhang,
Chujun Zhao,
Peng Yuan,
Shuangchun Wen,
Liejia Qian
Abstract:
Black phosphorus, a newly emerged two-dimensional material, has attracted wide attention as novel photonic material. Here, multi-layer black phosphorus is successfully fabricated by liquid phase exfoliation method. By employing black phosphorus as saturable absorber, we demonstrate a passively Q-switched Er-doped ZBLAN fiber laser at the wavelength of 2.8 μm. The modulation depth and saturation fl…
▽ More
Black phosphorus, a newly emerged two-dimensional material, has attracted wide attention as novel photonic material. Here, multi-layer black phosphorus is successfully fabricated by liquid phase exfoliation method. By employing black phosphorus as saturable absorber, we demonstrate a passively Q-switched Er-doped ZBLAN fiber laser at the wavelength of 2.8 μm. The modulation depth and saturation fluence of the black phosphorus saturable absorber are measured to be 15% and 9 μJ/cm2, respectively. The Q-switched fiber laser delivers a maximum average power of 485 mW with corresponding pulse energy of 7.7 μJ and pulse width of 1.18 μs at repetition rate of 63 kHz. To the best of our knowledge, this is the first time to demonstrate that black phosphorus can realize Q-switching of 2.8-μm fiber laser. Our research results show that black phosphorus is a promising saturable absorber for mid-infrared pulsed lasers.
△ Less
Submitted 12 August, 2015;
originally announced August 2015.
-
Self-calibrating Fiber Spectrometer for the Measurement of Broadband Downconverted Photon Pairs
Authors:
E. Y. Zhu,
C. Corbari,
P. G. Kazansky,
L. Qian
Abstract:
We experimentally demonstrate a simple method to measure the biphoton joint spectrum by map** the spectral information onto the temporal domain using a dispersive medium. Various top-hat spectral filters are used to limit the spectral (and hence, temporal) extent of the broadband downconversion photons measured. The sharp edges of the spectral filters are utilized as spectral markers for dispers…
▽ More
We experimentally demonstrate a simple method to measure the biphoton joint spectrum by map** the spectral information onto the temporal domain using a dispersive medium. Various top-hat spectral filters are used to limit the spectral (and hence, temporal) extent of the broadband downconversion photons measured. The sharp edges of the spectral filters are utilized as spectral markers for dispersion characterization of the dispersive medium. This method allows dispersion characterization and joint spectral measurement to be completed simultaneously. The joint spectrum (which extends beyond 100 nm, centered about 1.5 micron) of the type-II downconverted photon pairs generated from a poled optical fiber is obtained with this method.
△ Less
Submitted 5 May, 2015;
originally announced May 2015.
-
Scattering-initiated parametric noise in optical parametric chirped-pulse amplification
Authors:
**g Wang,
**gui Ma,
Peng Yuan,
Daolong Tang,
Binjie Zhou,
Guoqiang Xie,
Liejia Qian
Abstract:
We experimentally study a new kind of parametric noise that is initiated from signal scattering and enhanced through optical parametric amplification. Such scattering noise behaves similarly to the parametric super-fluorescence in the spatial domain, yet is typically much stronger. In the time domain, it inherits the chirp of signal pulses and can be well compressed. We demonstrate that this scatt…
▽ More
We experimentally study a new kind of parametric noise that is initiated from signal scattering and enhanced through optical parametric amplification. Such scattering noise behaves similarly to the parametric super-fluorescence in the spatial domain, yet is typically much stronger. In the time domain, it inherits the chirp of signal pulses and can be well compressed. We demonstrate that this scattering-initiated parametric noise has little influence on the amplified pulse contrast but can degrade the conversion efficiency substantially.
△ Less
Submitted 6 March, 2015;
originally announced March 2015.
-
High visibility two photon interference of frequency time entangled photons generated in a quasi phase matched AlGaAs waveguide
Authors:
Peyman Sarrafi,
Eric Y. Zhu,
Barry M. Holmes,
David C. Hutchings,
Stewart Aitchison,
Li Qian
Abstract:
We demonstrate experimentally the frequency time entanglement of photon pairs produced in a CW pumped quasi phased matched AlGaAs superlattice waveguide. A visibility of 96.0+-0.7% without background subtraction has been achieved, which corresponds the violation of Bell inequality by 52 standard deviations.
We demonstrate experimentally the frequency time entanglement of photon pairs produced in a CW pumped quasi phased matched AlGaAs superlattice waveguide. A visibility of 96.0+-0.7% without background subtraction has been achieved, which corresponds the violation of Bell inequality by 52 standard deviations.
△ Less
Submitted 15 October, 2014;
originally announced October 2014.
-
A meshless method for compressible flows with the HLLC Riemann solver
Authors:
Z. H. Ma,
H. Wang,
L. Qian
Abstract:
The HLLC Riemann solver, which resolves both the shock waves and contact discontinuities, is popular to the computational fluid dynamics community studying compressible flow problems with mesh methods. Although it was reported to be used in meshless methods, the crucial information and procedure to realise this scheme within the framework of meshless methods were not clarified fully. Moreover, the…
▽ More
The HLLC Riemann solver, which resolves both the shock waves and contact discontinuities, is popular to the computational fluid dynamics community studying compressible flow problems with mesh methods. Although it was reported to be used in meshless methods, the crucial information and procedure to realise this scheme within the framework of meshless methods were not clarified fully. Moreover, the capability of the meshless HLLC solver to deal with compressible liquid flows is not completely clear yet as very few related studies have been reported. Therefore, a comprehensive investigation of a dimensional non-split HLLC Riemann solver for the least-square meshless method is carried out in this study. The stiffened gas equation of state is adopted to capacitate the proposed method to deal with single-phase gases and/or liquids effectively, whilst direct applying the perfect gas equation of state for compressible liquid flows might encounter great difficulties in correlating the state variables. The spatial derivatives of the Euler equations are computed by a least-square approximation and the flux terms are calculated by the HLLC scheme in a dimensional non-split pattern. Simulations of gas and liquid shock tubes, moving shock passing a cylinder, internal supersonic flows in channels and external transonic flows over aerofoils are accomplished. The current approach is verified by extensive comparisons of the produced numerical outcomes with various available data such as the exact solutions, finite volume mesh method results, experimental measurements or other reference results.
△ Less
Submitted 11 February, 2014;
originally announced February 2014.
-
Similariton-like Pulses in Synchronously Pumped Singly Resonant Optical Parametric Oscillators
Authors:
Fuyong Wang,
Guoqiang Xie,
Peng Yuan,
Liejia Qian,
Dingyuan Tang
Abstract:
Similariton-like pulses are found to be formed in synchronously pumped singly resonant optical parametric oscillators (OPO) by numerical simulation. The nonlinear coupled-wave equations can be reduced to inhomogeneous nonlinear Schrödinger equation. The signal pulses with parabola-like temporal intensity profile and linear chirp are presented in OPO. The similariton-like pulses in OPO have many pr…
▽ More
Similariton-like pulses are found to be formed in synchronously pumped singly resonant optical parametric oscillators (OPO) by numerical simulation. The nonlinear coupled-wave equations can be reduced to inhomogeneous nonlinear Schrödinger equation. The signal pulses with parabola-like temporal intensity profile and linear chirp are presented in OPO. The similariton-like pulses in OPO have many practical and potential applications.
△ Less
Submitted 2 February, 2015; v1 submitted 17 December, 2013;
originally announced December 2013.
-
Correlated Photon Pair Production by Spontaneous Parametric Down Conversion in Quasi-Phase-Matched AlGaAs superlattice Waveguides using a Continuous Wave Pump
Authors:
Peyman Sarrafi,
Eric Zhu,
Ksenia Dolgaleva,
Barry M. Holmes,
David C. Hutchings,
Stewart Aitchison,
Li Qian
Abstract:
We report on the demonstration of correlated photon pair generation in quasi-phase-matched superlattice AlGaAs waveguides with a high coincidence-to-accidental ratio (CAR); with a continuous (CW) pump, the observed CAR (>100) is more than two order of magnitudes improvement over previously reported spontaneous down conversion (SPDC) schemes in AlGaAs waveguides with a pulsed pump.
We report on the demonstration of correlated photon pair generation in quasi-phase-matched superlattice AlGaAs waveguides with a high coincidence-to-accidental ratio (CAR); with a continuous (CW) pump, the observed CAR (>100) is more than two order of magnitudes improvement over previously reported spontaneous down conversion (SPDC) schemes in AlGaAs waveguides with a pulsed pump.
△ Less
Submitted 1 April, 2013;
originally announced April 2013.
-
High-resolution, large dynamic range fiber length measurement based on frequency-shifted asymmetrical Sagnac interferometer
Authors:
Bing Qi,
Andrew Tausz,
Li Qian,
Hoi-Kwong Lo
Abstract:
We propose and experimentally demonstrate a single-mode fiber length and dispersion measurement system based on a novel frequency-shifted asymmetric Sagnac interferometer incorporating an acousto-optic modulator (AOM). By swee** the driving frequency of the AOM, which is asymmetrically placed in the Sagnac loop, the optical length of the fiber can be determined by measuring the corresponding v…
▽ More
We propose and experimentally demonstrate a single-mode fiber length and dispersion measurement system based on a novel frequency-shifted asymmetric Sagnac interferometer incorporating an acousto-optic modulator (AOM). By swee** the driving frequency of the AOM, which is asymmetrically placed in the Sagnac loop, the optical length of the fiber can be determined by measuring the corresponding variation in the phase delay between the two counter-propagating light beams. Combined with a high-resolution data processing algorithm, this system yields a dynamic range from a few centimeters to 60km (limited only by our availability of long fibers) with a resolution about 1ppm for long fibers.
△ Less
Submitted 21 July, 2006;
originally announced July 2006.