-
Compact low-half-wave-voltage thin film lithium niobate electro-optic phase modulator fabricated by photolithography assisted chemo-mechanical etching
Authors:
Lang Gao,
Youting Liang,
**ming Chen,
Jian** Yu,
Jia Qi,
Lvbin Song,
Jian Liu,
Zhaoxiang Liu,
Hongxin Qi,
Ya Cheng
Abstract:
This paper presents a compact dual-arm thin film lithium niobate (TFLN) electro-optic phase modulator fabricated using the photolithography-assisted chemo-mechanical etching (PLACE) technique. The design of the device allows for complete utilization of the microwave electric field, doubling the modulation efficiency compared to single-arm modulators in theory. With a half-wave voltage of approxima…
▽ More
This paper presents a compact dual-arm thin film lithium niobate (TFLN) electro-optic phase modulator fabricated using the photolithography-assisted chemo-mechanical etching (PLACE) technique. The design of the device allows for complete utilization of the microwave electric field, doubling the modulation efficiency compared to single-arm modulators in theory. With a half-wave voltage of approximately 3 V and a modulation length of 1 cm, the device outperforms conventional phase modulators. Furthermore, the phase modulator exhibits low sensitivity to optical wavelengths in the range of 1510-1600 nm and offers a low insertion loss of 2.8 dB. The capability to generate multiple sideband signals for optical frequency comb applications is also demonstrated, producing 29 sideband signals at an input microwave power of 2 W.
△ Less
Submitted 12 June, 2024;
originally announced June 2024.
-
Extended system-bath entanglement theorem for multiple bosonic or fermionic environments
Authors:
Yu Su,
Hao-Yang Qi,
Zi-Hao Chen,
Yao Wang,
Rui-Xue Xu,
Yi**g Yan
Abstract:
The system-bath entanglement theorem (SBET) was established in terms of linear response functions [J. Chem. Phys. 152, 034102 (2020)] and generalized to correlation functions [arXiv: 2312.13618 (2023)] in our previous works. This theorem connects the entangled system-bath properties to the local system and bare bath ones. In this work, firstly we extend the SBET to field-dressed conditions with mu…
▽ More
The system-bath entanglement theorem (SBET) was established in terms of linear response functions [J. Chem. Phys. 152, 034102 (2020)] and generalized to correlation functions [arXiv: 2312.13618 (2023)] in our previous works. This theorem connects the entangled system-bath properties to the local system and bare bath ones. In this work, firstly we extend the SBET to field-dressed conditions with multiple bosonic Gaussian environments at different temperatures. Not only the system but also environments are considered to be of optical polarizability, as in reality. With the aid of the extended SBET developed here, for the evaluation of the nonlinear spectroscopy such as the pump-probe, the entangled system-bath contributions can be obtained upon reduced system evolutions via certain quantum dissipative methods. The extended SBET in the field-free condition and its counterpart in the classical limit is also presented. The SBET for fermionic environments is elaborated within the transport scenarios for completeness.
△ Less
Submitted 18 January, 2024; v1 submitted 17 January, 2024;
originally announced January 2024.
-
Thin Film Lithium Niobate Electro-optic Isolator Fabricated by photolithography assisted chemo-mechanical etching (PLACE)
Authors:
Lang Gao,
Youting Liang,
Lvbin Song,
Difeng Yin,
Jia Qi,
**ming Chen,
Zhaoxiang Liu,
Jian** Yu,
Jian Liu,
Haisu Zhang,
Zhiwei Fang,
Hongxin Qi,
Ya Cheng
Abstract:
We report a thin-film lithium niobate electro-optic isolator fabricated by photolithography-assisted chemo-mechanical etching in this work. The device demonstrates 39.50 dB isolation when subjected to a 24 GHz microwave of 25.5 dBm on its electrodes. The measured isolation remains consistently above 30 dB within the 1510 nm to 1600 nm wavelength range. The overall device insertion loss, specifical…
▽ More
We report a thin-film lithium niobate electro-optic isolator fabricated by photolithography-assisted chemo-mechanical etching in this work. The device demonstrates 39.50 dB isolation when subjected to a 24 GHz microwave of 25.5 dBm on its electrodes. The measured isolation remains consistently above 30 dB within the 1510 nm to 1600 nm wavelength range. The overall device insertion loss, specifically the fiber-to-fiber insert loss, has been measured to be 2.6 dB, which is attributed to our highly efficient spot size converter and the low propagation loss observed in the fabricated waveguides.
△ Less
Submitted 20 November, 2023;
originally announced November 2023.
-
Combined Experimental and Theoretical Studies on Iodine Capture of Zr-based Metal-Organic Frameworks: Effect of N-functionalization and Adsorption Mechanism
Authors:
Jie Liang,
Haoyi Tan,
Jiaomei Liu,
Huizhao Qi,
Xin Li,
Liu Wu,
Xiangfei Xue,
Guangcun Shan
Abstract:
The potential leakage of nuclear waste, especially radioiodine, is a major safety concerning issue around the world. To remove radioiodine from nuclear waste efficiently, there is an urgent demand for adsorbents that possess both high stability and strong adsorption affinity for environmental remediation. Herein, two Zr-based metal-organic frameworks (Zr-MOFs) and their N-functionalized analogues…
▽ More
The potential leakage of nuclear waste, especially radioiodine, is a major safety concerning issue around the world. To remove radioiodine from nuclear waste efficiently, there is an urgent demand for adsorbents that possess both high stability and strong adsorption affinity for environmental remediation. Herein, two Zr-based metal-organic frameworks (Zr-MOFs) and their N-functionalized analogues have been synthesized and researched for iodine adsorption in both vapours and solutions. It was found that Zr-MOFs with N-enriched ligands (e.g., pyridine and amino) exhibited the faster iodine adsorption rate and the higher iodine uptake amount (e.g., reaching adsorption equilibrium within 4 hours with the removal rate of above 85% for iodine solution adsorption) than their unfunctionalized counterparts (UiO-66 and UiO-67). The critical role played by N-enriched groups in enhancing iodine adsorption has been revealed through versatile model fittings, X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy characterizations, as well as density functional theory (DFT) calculations. Compared to those in amino-group, the N-atoms in pyridine-groups showed a deeper affinity towards iodine molecules. Remarkably, the N-enriched UiOs adsorbents also exhibited good recyclability, especially UiO-66-PYDC and UiO-67-NH2 could maintain the removal efficiency of 89.05% and 85.49% after four adsorption-desorption recycling tests. With the strong iodine uptake affinity and outstanding regeneration performance, this work has systematically investigated the impact of N-functionalization on the enhanced performance for iodine capture by using the N-enriched UiO MOFs as promising adsorbents, providing an insightful guideline into the physical chemistry of adsorption mechanism behind the radioiodine capture.
△ Less
Submitted 5 October, 2023;
originally announced October 2023.
-
Radiative thermal switch via metamaterials made of vanadium dioxide-coated nanoparticles
Authors:
Ming-Jian He,
Xue Guo,
Hong Qi,
Lu Lu,
He-** Tan
Abstract:
In this work, a thermal switch is proposed based on the phase-change material vanadium dioxide (VO2) within the framework of near-field radiative heat transfer (NFRHT). The radiative thermal switch consists of two metamaterials filled with core-shell nanoparticles, with the shell made of VO2. Compared to traditional VO2 slabs, the proposed switch exhibits a more than 2-times increase in the switch…
▽ More
In this work, a thermal switch is proposed based on the phase-change material vanadium dioxide (VO2) within the framework of near-field radiative heat transfer (NFRHT). The radiative thermal switch consists of two metamaterials filled with core-shell nanoparticles, with the shell made of VO2. Compared to traditional VO2 slabs, the proposed switch exhibits a more than 2-times increase in the switching ratio, reaching as high as 90.29% with a 100 nm vacuum gap. The improved switching effect is attributed to the capability of the VO2 shell to couple with the core, greatly enhancing heat transfer with the insulating VO2, while blocking the motivation of the core in the metallic state of VO2. As a result, this efficiently enlarges the difference in photonic characteristics between the insulating and metallic states of the structure, thereby improving the ability to rectify the NFRHT. The proposed switch opens pathways for active control of NFRHT and holds practical significance for develo** thermal photon-based logic circuits.
△ Less
Submitted 19 September, 2023;
originally announced September 2023.
-
Giant proton transmembrane transport through sulfophenylated graphene in a direct methanol fuel cell
Authors:
Weizhe Zhang,
Max Makurat,
Xue Liu,
Xiaofang Kang,
Xiaoting Liu,
Yanglizhi Li,
Thomas J. F. Kock,
Christopher Leist,
Clement Maheu,
Hikmet Sezen,
Lin Jiang,
Dario Calvani,
Andy Jiao,
Ismail Eren,
Francesco Buda,
Agnieszka Kuc,
Thomas Heine,
Haoyuan Qi,
Xinliang Feng,
Jan P. Hofmann,
Ute Kaiser,
Luzhao Sun,
Zhongfan Liu,
Gregory F. Schneider
Abstract:
An ideal proton exchange membrane should only permeate protons and be leak tight for fuels. Graphene is impermeable to water and poorly conducting to protons. Here, we chemically functionalized monolayer graphene to install sulfophenylated sp3 dislocations by diazotization. Selective to protons, transmembrane areal conductances are up to ~50 S/cm2, which is ~5000 fold higher than in pristine graph…
▽ More
An ideal proton exchange membrane should only permeate protons and be leak tight for fuels. Graphene is impermeable to water and poorly conducting to protons. Here, we chemically functionalized monolayer graphene to install sulfophenylated sp3 dislocations by diazotization. Selective to protons, transmembrane areal conductances are up to ~50 S/cm2, which is ~5000 fold higher than in pristine graphene. Mounted in a direct methanol fuel cell, sulfophenylated graphene resulted in power densities up to 1.6 W/mg or 123 mW/cm under standard cell operation (60 C), a value ~two-fold larger than micron-thick films of Nafion 117. The combination of sp3 dislocations and polar groups, therefore, allow the creation of hydrophilic ion paths through graphene and unveils a novel route to rationalize transmembrane hydron transport through 2D materials.
△ Less
Submitted 30 August, 2023;
originally announced August 2023.
-
K-band: Self-supervised MRI Reconstruction via Stochastic Gradient Descent over K-space Subsets
Authors:
Frederic Wang,
Han Qi,
Alfredo De Goyeneche,
Reinhard Heckel,
Michael Lustig,
Efrat Shimron
Abstract:
Although deep learning (DL) methods are powerful for solving inverse problems, their reliance on high-quality training data is a major hurdle. This is significant in high-dimensional (dynamic/volumetric) magnetic resonance imaging (MRI), where acquisition of high-resolution fully sampled k-space data is impractical. We introduce a novel mathematical framework, dubbed k-band, that enables training…
▽ More
Although deep learning (DL) methods are powerful for solving inverse problems, their reliance on high-quality training data is a major hurdle. This is significant in high-dimensional (dynamic/volumetric) magnetic resonance imaging (MRI), where acquisition of high-resolution fully sampled k-space data is impractical. We introduce a novel mathematical framework, dubbed k-band, that enables training DL models using only partial, limited-resolution k-space data. Specifically, we introduce training with stochastic gradient descent (SGD) over k-space subsets. In each training iteration, rather than using the fully sampled k-space for computing gradients, we use only a small k-space portion. This concept is compatible with different sampling strategies; here we demonstrate the method for k-space "bands", which have limited resolution in one dimension and can hence be acquired rapidly. We prove analytically that our method stochastically approximates the gradients computed in a fully-supervised setup, when two simple conditions are met: (i) the limited-resolution axis is chosen randomly-uniformly for every new scan, hence k-space is fully covered across the entire training set, and (ii) the loss function is weighed with a mask, derived here analytically, which facilitates accurate reconstruction of high-resolution details. Numerical experiments with raw MRI data indicate that k-band outperforms two other methods trained on limited-resolution data and performs comparably to state-of-the-art (SoTA) methods trained on high-resolution data. k-band hence obtains SoTA performance, with the advantage of training using only limited-resolution data. This work hence introduces a practical, easy-to-implement, self-supervised training framework, which involves fast acquisition and self-supervised reconstruction and offers theoretical guarantees.
△ Less
Submitted 23 May, 2024; v1 submitted 5 August, 2023;
originally announced August 2023.
-
A Cu3BHT-Graphene van der Waals Heterostructure with Strong Interlayer Coupling
Authors:
Zhiyong Wang,
Shuai Fu,
Wenjie Zhang,
Baokun Liang,
Tsai Jung Liu,
Mike Hambsch,
Jonas F. Pöhls,
Yufeng Wu,
Jianjun Zhang,
Tianshu Lan,
Xiaodong Li,
Haoyuan Qi,
Miroslav Polozij,
Stefan C. B. Mannsfeld,
Ute Kaiser,
Mischa Bonn,
R. Thomas Weitz,
Thomas Heine,
Stuart S. P. Parkin,
Hai I Wang,
Renhao Dong,
Xinliang Feng
Abstract:
Two dimensional van der Waals heterostructures (2D are of significant interest due to their intriguing physical properties that are critically defined by the constituent monolayers and their interlayer coupling . However, typical inorganic 2 D vdWhs fall into the weakly coupled region, limiting efficient interfacial charge flow crucial for develo** high performance quantum opto electronics. Here…
▽ More
Two dimensional van der Waals heterostructures (2D are of significant interest due to their intriguing physical properties that are critically defined by the constituent monolayers and their interlayer coupling . However, typical inorganic 2 D vdWhs fall into the weakly coupled region, limiting efficient interfacial charge flow crucial for develo** high performance quantum opto electronics. Here, we demonstrate strong interlayer coupling in Cu3 BHT (BHT = benzenehexathiol) graphene vdWhs an organic inorganic bilayer characterized by prominent interlayer charge transfer Monolayer Cu3 BHT with a Kagome lattice is synthesized on the water surface and then coupled with graphene to produce a cm2 scale 2D vdWh. Spectroscopic and electrical studies, along with theoretical calculation s show significant hole transfer from monolayer Cu3 BHT to graphene upon contact , being characteristic fingerprints for strong interlayer coupling This study unveils the great potential of integrating highly pi-conjugated 2D coordination polymers (2DCPs) into 2D vdWhs to explor e intriguing physical phenomena.
△ Less
Submitted 26 June, 2023;
originally announced June 2023.
-
Splitting of temperature distributions due to dual-channel photon heat exchange in many-body systems
Authors:
Ming-Jian He,
Xue Guo,
Hong Qi,
Ivan Latella,
He-** Tan
Abstract:
We investigate the radiative heat transfer and spatial distributions of stationary temperatures in periodic many-body systems composed of alternating slabs of two different materials. We show that temperature distributions exhibit an alternating spatial pattern and split into two distinct components, with each component corresponding to one of the two materials. Spatial temperature variations foll…
▽ More
We investigate the radiative heat transfer and spatial distributions of stationary temperatures in periodic many-body systems composed of alternating slabs of two different materials. We show that temperature distributions exhibit an alternating spatial pattern and split into two distinct components, with each component corresponding to one of the two materials. Spatial temperature variations following the periodicity of the structure can be attributed to a dual-channel photon heat exchange through a long-range coupling of electromagnetic modes supported by bodies of the same material. We also analyze the thermal relaxation of the temperatures in the system to verify potential applications in dynamical situations. The results reveal that tunable nonmonotonic temperature variations can be also designed and utilized at a transient mode. The dual-channel mechanism to control temperature distributions proposed in the present work may pave new avenues for prospective applications in nano devices, especially for thermal photon-driven logic circuitry and thermal management.
△ Less
Submitted 24 June, 2023;
originally announced June 2023.
-
Multiple magnetoplasmon polaritons of magneto-optical graphene in near-field radiative heat transfer
Authors:
Ming-Jian He,
Lei Qu,
Ya-Tao Ren,
Hong Qi,
Mauro Antezza,
He-** Tan
Abstract:
Graphene, as a two-dimensional magneto-optical material, supports magnetoplasmon polaritons (MPP) when exposed to an applied magnetic field. Recently, MPP of a single-layer graphene has shown an excellent capability in the modulation of near-field radiative heat transfer (NFRHT). In this study, we present a comprehensive theoretical analysis of NFRHT between two multilayered graphene structures, w…
▽ More
Graphene, as a two-dimensional magneto-optical material, supports magnetoplasmon polaritons (MPP) when exposed to an applied magnetic field. Recently, MPP of a single-layer graphene has shown an excellent capability in the modulation of near-field radiative heat transfer (NFRHT). In this study, we present a comprehensive theoretical analysis of NFRHT between two multilayered graphene structures, with a particular focus on the multiple MPP effect. We reveal the physical mechanism and evolution law of the multiple MPP, and we demonstrate that the multiple MPP allow one to mediate, enhance, and tune the NFRHT by appropriately engineering the properties of graphene, the number of graphene sheets, the intensity of magnetic fields, as well as the geometric structure of systems. We show that the multiple MPP have a quite significant distinction relative to the single MPP or multiple surface plasmon polaritons (SPPs) in terms of modulating and manipulating NFRHT.
△ Less
Submitted 24 June, 2023;
originally announced June 2023.
-
Performance improvement of three-body radiative diode driven by graphene surface plasmon polaritons
Authors:
Ming-Jian He,
Xue Guo,
Hong Qi,
Zhi-Heng Zheng,
Mauro Antezza,
He-** Tan
Abstract:
As an analogue to electrical diode, a radiative thermal diode allows radiation to transfer more efficiently in one direction than in the opposite direction by operating in a contactless mode. In this study, we demonstrated that, within the framework of three-body photon thermal tunneling, the rectification performance of three-body radiative diode can be greatly improved by bringing graphene into…
▽ More
As an analogue to electrical diode, a radiative thermal diode allows radiation to transfer more efficiently in one direction than in the opposite direction by operating in a contactless mode. In this study, we demonstrated that, within the framework of three-body photon thermal tunneling, the rectification performance of three-body radiative diode can be greatly improved by bringing graphene into the system. The system is composed of three parallel slabs, with the hot and cold terminals of the diode coated with graphene films, and the intermediate body made of vanadium dioxide (VO2). The rectification factor of the proposed radiative thermal diode reaches 300 % with a 350 nm separation distance between the hot and cold terminals of the diode. With the help of graphene, the rectification performance of the radiative thermal diode can be improved by over 11 times. By analyzing the spectral heat flux and energy transmission coefficients, it was found that the improved performance is primarily attributed to the surface plasmon polaritons (SPPs) of graphene. They excite the modes of insulating VO2 in the forward-biased scenario by forming strongly coupled modes between graphene and VO2, and thus dramatically enhance the heat flux. While, for the reverse-biased scenario, the VO2 is at its metallic state and thus graphene SPPs cannot work by three-body photon thermal tunneling. Furthermore, the improvement was also investigated for different chemical potentials of graphene, and geometric parameters of the three-body system. Our findings demonstrate the feasibility of using thermal-photon-based logical circuits, creating radiation-based communication technology, and implementing thermal management approaches at the nanoscale.
△ Less
Submitted 23 June, 2023;
originally announced June 2023.
-
The LHCb upgrade I
Authors:
LHCb collaboration,
R. Aaij,
A. S. W. Abdelmotteleb,
C. Abellan Beteta,
F. Abudinén,
C. Achard,
T. Ackernley,
B. Adeva,
M. Adinolfi,
P. Adlarson,
H. Afsharnia,
C. Agapopoulou,
C. A. Aidala,
Z. Ajaltouni,
S. Akar,
K. Akiba,
P. Albicocco,
J. Albrecht,
F. Alessio,
M. Alexander,
A. Alfonso Albero,
Z. Aliouche,
P. Alvarez Cartelle,
R. Amalric,
S. Amato
, et al. (1298 additional authors not shown)
Abstract:
The LHCb upgrade represents a major change of the experiment. The detectors have been almost completely renewed to allow running at an instantaneous luminosity five times larger than that of the previous running periods. Readout of all detectors into an all-software trigger is central to the new design, facilitating the reconstruction of events at the maximum LHC interaction rate, and their select…
▽ More
The LHCb upgrade represents a major change of the experiment. The detectors have been almost completely renewed to allow running at an instantaneous luminosity five times larger than that of the previous running periods. Readout of all detectors into an all-software trigger is central to the new design, facilitating the reconstruction of events at the maximum LHC interaction rate, and their selection in real time. The experiment's tracking system has been completely upgraded with a new pixel vertex detector, a silicon tracker upstream of the dipole magnet and three scintillating fibre tracking stations downstream of the magnet. The whole photon detection system of the RICH detectors has been renewed and the readout electronics of the calorimeter and muon systems have been fully overhauled. The first stage of the all-software trigger is implemented on a GPU farm. The output of the trigger provides a combination of totally reconstructed physics objects, such as tracks and vertices, ready for final analysis, and of entire events which need further offline reprocessing. This scheme required a complete revision of the computing model and rewriting of the experiment's software.
△ Less
Submitted 17 May, 2023;
originally announced May 2023.
-
Investigating and modeling day-to-day route choices based on laboratory experiments. Part II: A route-dependent attraction-based stochastic process model
Authors:
Hang Qi,
Ning Jia,
Xiaobo Qu,
Zhengbing He
Abstract:
To explain day-to-day (DTD) route-choice behaviors and traffic dynamics observed in a series of lab experiments, Part I of this research proposed a discrete choice-based analytical dynamic model (Qi et al., 2023). Although the deterministic model could well reproduce the experimental observations, it converges to a stable equilibrium of route flow while the observed DTD evolution is apparently wit…
▽ More
To explain day-to-day (DTD) route-choice behaviors and traffic dynamics observed in a series of lab experiments, Part I of this research proposed a discrete choice-based analytical dynamic model (Qi et al., 2023). Although the deterministic model could well reproduce the experimental observations, it converges to a stable equilibrium of route flow while the observed DTD evolution is apparently with random oscillations. To overcome the limitation, the paper proposes a route-dependent attraction-based stochastic process (RDAB-SP) model based on the same behavioral assumptions in Part I of this research. Through careful comparison between the model-based estimation and experimental observations, it is demonstrated that the proposed RDAB-SP model can accurately reproduce the random oscillations both in terms of flow switching and route flow evolution. To the best of our knowledge, this is the first attempt to explain and model experimental observations by using stochastic process DTD models, and it is interesting to find that the seemingly unanticipated phenomena (i.e., random route switching behavior) is actually dominated by simple rules, i.e., independent and probability-based route-choice behavior. Finally, an approximated model is developed to help simulate the stochastic process and evaluate the equilibrium distribution in a simple and efficient manner, making the proposed model a useful and practical tool in transportation policy design.
△ Less
Submitted 7 March, 2023;
originally announced March 2023.
-
Investigating day-to-day route choices based on multi-scenario laboratory experiments. Part I: Route-dependent attraction and its modeling
Authors:
Hang Qi,
Ning Jia,
Xiaobo Qu,
Zhengbing He
Abstract:
In the area of urban transportation networks, a growing number of day-to-day (DTD) traffic dynamic theories have been proposed to describe the network flow evolution, and an increasing amount of laboratory experiments have been conducted to observe travelers' behavior regularities. However, the "communication" between theorists and experimentalists has not been made well. This paper devotes to 1)…
▽ More
In the area of urban transportation networks, a growing number of day-to-day (DTD) traffic dynamic theories have been proposed to describe the network flow evolution, and an increasing amount of laboratory experiments have been conducted to observe travelers' behavior regularities. However, the "communication" between theorists and experimentalists has not been made well. This paper devotes to 1) detecting unanticipated behavior regularities by conducting a series of laboratory experiments, and 2) improving existing DTD dynamics theories by embedding the observed behavior regularities into a route choice model. First, 312 subjects participated in one of the eight decision-making scenarios and make route choices repeatedly in congestible parallel-route networks. Second, three route-switching behavior patterns that cannot be fully explained by the classic route-choice models are observed. Third, to enrich the explanation power of a discrete route-choice model, behavioral assumptions of route-dependent attractions, i.e., route-dependent inertia and preference, are introduced. An analytical DTD dynamic model is accordingly proposed and proven to steadily converge to a unique equilibrium state. Finally, the proposed DTD model could satisfactorily reproduce the observations in various datasets. The research results can help transportation science theorists to make the best use of laboratory experimentation and to build network equilibrium or DTD dynamic models with both real behavioral basis and neat mathematical properties.
△ Less
Submitted 7 March, 2023;
originally announced March 2023.
-
A novel technique for the measurement of the avalanche fluctuations of a GEM stack using a gating foil
Authors:
M. Kobayashi,
K. Yumino,
T. Ogawa,
A. Shoji,
Y. Aoki,
K. Ikematsu,
P. Gros,
T. Kawaguchi,
D. Arai,
M. Iwamura,
K. Katsuki,
A. Koto,
M. Yoshikai,
K. Fujii,
T. Fusayasu,
Y. Kato,
S. Kawada,
T. Matsuda,
T. Mizuno,
J. Nakajima,
S. Narita,
K. Negishi,
H. Qi,
R. D. Settles,
A. Sugiyama
, et al. (4 additional authors not shown)
Abstract:
We have developed a novel technique for the measurement of the size of avalanche fluctuations of gaseous detectors using a gating device (gating foil) prepared for the time projection chamber in the international linear collider experiment (ILD-TPC). In addition to the gating function, the gating foil is capable of controlling the average fraction of drift electrons detected after gas amplificatio…
▽ More
We have developed a novel technique for the measurement of the size of avalanche fluctuations of gaseous detectors using a gating device (gating foil) prepared for the time projection chamber in the international linear collider experiment (ILD-TPC). In addition to the gating function, the gating foil is capable of controlling the average fraction of drift electrons detected after gas amplification. The signal charge width and shape (skewness) for electron-ion pairs created by a pulsed UV laser as a function of the transmission rate of the gating foil can be used to determine the relative variance of gas gain for single electrons. We present the measurement principle and the result obtained using a stack of gas electron multipliers (GEMs) operated in a gas mixture of Ar-CF$_4$(3%)-isobutane(2%) at atmospheric pressure. Also discussed is the influence of the avalanche fluctuations on the spatial resolution of the ILD-TPC.
△ Less
Submitted 2 July, 2022;
originally announced July 2022.
-
Performance of TPC detector prototype integrated with UV laser tracks for the circular collider
Authors:
Z. Y. Yuan,
H. R. Qi,
Y. Chang,
L. W. Yu,
Y. M. Cai,
H. Y. Zhang,
J. Zhang,
Q. Ouyang,
Y. L. Li,
Z. Deng,
H. Gong
Abstract:
Several new experimental concepts in high-energy particle physics have been proposed in recent years. The physical goals include precisely measuring the properties of particles such as Higgs, Z and W, and even looking for signs of new physics at future colliders. To meet the evolving requirements for particle track detector, Time Projection Chamber(TPC) detector prototype integrated with a UV lase…
▽ More
Several new experimental concepts in high-energy particle physics have been proposed in recent years. The physical goals include precisely measuring the properties of particles such as Higgs, Z and W, and even looking for signs of new physics at future colliders. To meet the evolving requirements for particle track detector, Time Projection Chamber(TPC) detector prototype integrated with a UV laser track system was developed for the main track detector at Circular Electron Positron Collider(CEPC). This prototype consists of 6 horizontal laser tracks around TPC detector chamber, a fast electronics readout of 1280 channels, a GEM detector with $200\times 200\,mm^2$ active area, and the DAQ system. The hit resolution, dE/dx resolution and drift velocity were studied by measuring and analyzing using the TPC prototype and UV laser tracks. The dE/dx resolution of the prototype was measured to be $(8.9\pm0.4)\,\%$. Extrapolating this to CEPC TPC with 220 layers and longer track, the resolution was estimated to be $(3.36\pm0.26)\,\%$. All results indicated that the TPC detector prototype integrated with UV laser tracks can work well.
△ Less
Submitted 6 June, 2022;
originally announced June 2022.
-
Double-hit separation and dE/dx resolution of a time projection chamber with GEM readout
Authors:
Yumi Aoki,
David Attié,
Ties Behnke,
Alain Bellerive,
Oleg Bezshyyko,
Deb Bhattacharya Sankar,
Purba Bhattacharya,
Sudeb Bhattacharya,
Yue Chang,
Paul Colas,
Gilles De Lentdecker,
Klaus Dehmelt,
Klaus Desch,
Ralf Diener,
Madhu Dixit,
Ulrich Einhaus,
Oleksiy Fedorchuk,
Ivor Fleck,
Keisuke Fujii,
Takahiro Fusayasu,
Serguei Ganjour,
Philippe Gros,
Peter Hayman,
Katsumasa Ikematsu,
Leif Jönsson
, et al. (46 additional authors not shown)
Abstract:
A time projection chamber (TPC) with micropattern gaseous detector (MPGD) readout is investigated as main tracking device of the International Large Detector (ILD) concept at the planned International Linear Collider (ILC). A prototype TPC equipped with a triple gas electron multiplier (GEM) readout has been built and operated in an electron test beam. The TPC was placed in a 1 T solenoidal field…
▽ More
A time projection chamber (TPC) with micropattern gaseous detector (MPGD) readout is investigated as main tracking device of the International Large Detector (ILD) concept at the planned International Linear Collider (ILC). A prototype TPC equipped with a triple gas electron multiplier (GEM) readout has been built and operated in an electron test beam. The TPC was placed in a 1 T solenoidal field at the DESY II Test Beam Facility, which provides an electron beam up to 6 GeV/c. The performance of the readout modules, in particular the spatial point resolution, is determined and compared to earlier tests. New studies are presented with first results on the separation of close-by tracks and the capability of the system to measure the specific energy loss dE/dx. This is complemented by a simulation study on the optimization of the readout granularity to improve particle identification by dE/dx.
△ Less
Submitted 25 November, 2022; v1 submitted 24 May, 2022;
originally announced May 2022.
-
MPGDs for TPCs at future lepton colliders
Authors:
Alain Bellerive,
Jochen Kaminski,
Peter M. Lewis,
Paul Colas,
Ralf Diener,
Peter Kluit,
Ronald Dean Settles,
Jan Timmermans,
Maxim Titov,
Andreas Loschcke Centeno,
Christian Wessel,
Oskar Hartbrich,
Sven Vahsen,
Carlos Marinas,
Huiron Qi,
Zhiyong Zhang
Abstract:
This submission will focus on advancements and advantages of Micro Pattern Gas Detector (MPGD) technologies and their applications to the construction of a dedicated Time Projection Chamber (TPC) that can serve as an excellent main tracker for any multipurpose detector that can be foreseen to operate at a future lepton collider. The first portion of the report will be the executive summary. It wil…
▽ More
This submission will focus on advancements and advantages of Micro Pattern Gas Detector (MPGD) technologies and their applications to the construction of a dedicated Time Projection Chamber (TPC) that can serve as an excellent main tracker for any multipurpose detector that can be foreseen to operate at a future lepton collider. The first portion of the report will be the executive summary. It will be followed by sections detailing the applications of MPGDs specifically to the construction of the LCTPC for the ILD at ILC, for a possible upgrade of the Belle II detector at SuperKEKB and for the design of a TPC for a detector at CEPC. MPGD technologies offer synergies with other detector R&D and several application domains; a few examples will be provided in the context of the ongoing Snowmass long range planning exercise in the USA. Links to industrial partnership and work with institutions in the USA will be highlighted when appropriate.
△ Less
Submitted 15 March, 2022; v1 submitted 11 March, 2022;
originally announced March 2022.
-
High-production-rate fabrication of low-loss lithium niobate electro-optic modulators using photolithography assisted chemo-mechanical etching (PLACE)
Authors:
Rongbo Wu,
Lang Gao,
Youting Liang,
Yong Zheng,
Junxia Zhou,
Hongxin Qi,
Difeng Yin,
Min Wang,
Zhiwei Fang,
Ya Cheng
Abstract:
Integrated thin-film lithium niobate (LN) electro-optic (EO) modulators of broad bandwidth, low insertion loss, low cost and high production rate are essential elements in contemporary inter-connection industries and disruptive applications. Here, we demonstrated the design and fabri-cation of a high performance thin-film LN EO modulator using photolithography assisted chemo-mechanical etching (PL…
▽ More
Integrated thin-film lithium niobate (LN) electro-optic (EO) modulators of broad bandwidth, low insertion loss, low cost and high production rate are essential elements in contemporary inter-connection industries and disruptive applications. Here, we demonstrated the design and fabri-cation of a high performance thin-film LN EO modulator using photolithography assisted chemo-mechanical etching (PLACE) technology. Our device shows a 3-dB bandwidth over 50 GHz, along with a comparable low half wave voltage-length product of 2.16 Vcm. We obtain a fiber-to-fiber insertion loss of 2.6 dB.
△ Less
Submitted 26 January, 2022;
originally announced January 2022.
-
Fast T2w/FLAIR MRI Acquisition by Optimal Sampling of Information Complementary to Pre-acquired T1w MRI
Authors:
Junwei Yang,
Xiao-Xin Li,
Feihong Liu,
Dong Nie,
Pietro Lio,
Haikun Qi,
Dinggang Shen
Abstract:
Recent studies on T1-assisted MRI reconstruction for under-sampled images of other modalities have demonstrated the potential of further accelerating MRI acquisition of other modalities. Most of the state-of-the-art approaches have achieved improvement through the development of network architectures for fixed under-sampling patterns, without fully exploiting the complementary information between…
▽ More
Recent studies on T1-assisted MRI reconstruction for under-sampled images of other modalities have demonstrated the potential of further accelerating MRI acquisition of other modalities. Most of the state-of-the-art approaches have achieved improvement through the development of network architectures for fixed under-sampling patterns, without fully exploiting the complementary information between modalities. Although existing under-sampling pattern learning algorithms can be simply modified to allow the fully-sampled T1-weighted MR image to assist the pattern learning, no significant improvement on the reconstruction task can be achieved. To this end, we propose an iterative framework to optimize the under-sampling pattern for MRI acquisition of another modality that can complement the fully-sampled T1-weighted MR image at different under-sampling factors, while jointly optimizing the T1-assisted MRI reconstruction model. Specifically, our proposed method exploits the difference of latent information between the two modalities for determining the sampling patterns that can maximize the assistance power of T1-weighted MR image in improving the MRI reconstruction. We have demonstrated superior performance of our learned under-sampling patterns on a public dataset, compared to commonly used under-sampling patterns and state-of-the-art methods that can jointly optimize both the reconstruction network and the under-sampling pattern, up to 8-fold under-sampling factor.
△ Less
Submitted 10 November, 2021;
originally announced November 2021.
-
A novel method to measure the dE/dx resolution of a TPC prototype using 266 nm UV laser
Authors:
Yiming Cai,
Yulan Li,
Huirong Qi,
Yuan**g Li,
Jian Yang,
Zhiyang Yuan,
Yue Chang
Abstract:
The specific energy loss (dE/dx) resolution is critical for particle identification and separation in TPC. In connection with the R&D for the TPC at the Circular Electron Positron Collider (CEPC), we find the laser ionisation obeys the Gaussian distribution theoretically and experimentally. Based on this, we develop a novel method using a 266 nm UV laser to measure the dE/dx resolution. Comparing…
▽ More
The specific energy loss (dE/dx) resolution is critical for particle identification and separation in TPC. In connection with the R&D for the TPC at the Circular Electron Positron Collider (CEPC), we find the laser ionisation obeys the Gaussian distribution theoretically and experimentally. Based on this, we develop a novel method using a 266 nm UV laser to measure the dE/dx resolution. Comparing to the traditional methods with particle beams or cosmic rays, the novel method with 266 nm UV laser is more convenient and flexible. We verify the method's feasibility with a TPC prototype and extrapolate the dE/dx resolution to the CEPC TPC. The estimation of the dE/dx resolution is without the magnetic field.
△ Less
Submitted 8 April, 2021;
originally announced April 2021.
-
Parameterization of nearshore wave breaker index
Authors:
Chi Zhang,
Yuan Li,
Yu Cai,
Jian Shi,
**hai Zheng,
Feng Cai,
Hongshuai Qi
Abstract:
The performances of phase-averaged parametric nearshore wave transformation models depend significantly on a reliable estimate of the wave breaker index r (the breaker height-to-depth ratio), a free model parameter that essentially controls the amount of breaking energy dissipation. While the previous studies have suggested separate relationships between r and the offshore wave steepness (s0) or t…
▽ More
The performances of phase-averaged parametric nearshore wave transformation models depend significantly on a reliable estimate of the wave breaker index r (the breaker height-to-depth ratio), a free model parameter that essentially controls the amount of breaking energy dissipation. While the previous studies have suggested separate relationships between r and the offshore wave steepness (s0) or the normalized local water depth (kh), the parameterization of r still requires further investigation considering a wider variety of conditions and a sounder physical basis. In this study, we use the field datasets of wave height and the inverse modelling approach to reveal a composite dependence of r on both s0 and kh. Specifically, the results show a positive dependence of r on kh for larger s0, and a negative dependence of r on kh for smaller s0. Based on such composite relationships, a new r formula is proposed, and its performance is verified against the available datasets of wave height in three coasts and 14 laboratory tests. Implementation of this new formula in a parametric wave model leads to the error reduction of wave height prediction by 10~24% (mean = 19%) relative to seven widely used models in literatures. In particular, a remarkably higher model accuracy is obtained under wave conditions with small offshore wave steepness, which is important for studying onshore sediment transport and beach recovery. Two counteractive physical mechanisms for wave nonlinearity effects, namely the breaking intensification mechanism and the breaking resistance mechanism, are suggested to explain the opposite r-kh relationships within different ranges of s0.
△ Less
Submitted 31 March, 2021;
originally announced April 2021.
-
Mitigating linear optics imperfections via port allocation and compilation
Authors:
Shreya P. Kumar,
Leonhard Neuhaus,
Lukas G. Helt,
Haoyu Qi,
Blair Morrison,
Dylan H. Mahler,
Ish Dhand
Abstract:
Linear optics is a promising route to building quantum technologies that operate at room temperature and can be manufactured scalably on integrated photonic platforms. However, scaling up linear optics requires high-performance operation amid inevitable manufacturing imperfections. We present techniques for enhancing the performance of linear optical interferometers by tailoring their port allocat…
▽ More
Linear optics is a promising route to building quantum technologies that operate at room temperature and can be manufactured scalably on integrated photonic platforms. However, scaling up linear optics requires high-performance operation amid inevitable manufacturing imperfections. We present techniques for enhancing the performance of linear optical interferometers by tailoring their port allocation and compilation to the on-chip imperfections, which can be determined beforehand by suitable calibration procedures that we introduce. As representative examples, we demonstrate dramatic reductions in the average power consumption of a given interferometer or in the range of its power consumption values across all possible unitary transformations implemented on it. Furthermore, we demonstrate the efficacy of these techniques at improving the fidelities of the desired transformations in the presence of fabrication defects. By improving the performance of linear optical interferometers in relevant metrics by several orders of magnitude, these tools bring optical technologies closer to demonstrating true quantum advantage.
△ Less
Submitted 4 March, 2021;
originally announced March 2021.
-
Feasibility study of TPC detector at high luminosity $Z$ pole on the circular collider
Authors:
Zhiyang Yuan,
Huirong Qi,
Yue Chang,
Ye Wu,
Hongyu Zhang,
Jian Zhang,
Yuanbo Chen,
Yiming Cai,
Yulan Li,
Zhi Deng,
Hui Gong
Abstract:
With the development of the circular collider, it is necessary to make accurate physics experimental measurements of particle properties at higher luminosity $Z$ pole. Micro-pattern gaseous detectors (MPGDs), which contain Gaseous Electron Multiplier (GEM) and Micro-mesh gaseous structures (Micromegas), have excellent potential for development as the readout devices of the time projection chamber…
▽ More
With the development of the circular collider, it is necessary to make accurate physics experimental measurements of particle properties at higher luminosity $Z$ pole. Micro-pattern gaseous detectors (MPGDs), which contain Gaseous Electron Multiplier (GEM) and Micro-mesh gaseous structures (Micromegas), have excellent potential for development as the readout devices of the time projection chamber (TPC) tracker detector. To meet the updated physics requirements of the high luminosity $Z$ from the preliminary concept design report (preCDR) to concept design report (CDR) at the circular electron positron collider (CEPC), In this paper, the space charge distortion of the TPC detector is simulated with the CEPC beam structure. Using the multi-physics simulation software package, the distribution of ion estimated by Geant4 is used as the input for the differential equation, and the relationship between the ion density distribution and electric field in the detector chamber is simulated. These simulation results show that the maximum deviation for Higgs $\mathcal{O}$(25 $μ$m) meets the performance requirements in CEPC TPC detector at the high luminosity $Z$ pole, while it is still a considerable challenge for $Z$ pole, with the maximum deviation $\mathcal{O}$($>100~μ$m). According to the previous developments, the cascaded structure of GEM and Micromegas detector has been measured. The new considerations of the detector's requirements were given, the gain needs to be reached to about 2000 with IBF$\times$Gain under 0.1, and IBF means the ions back flow ratio of the detector. The pixel TPC is a potential option to replace the traditional MPGDs with the low gain, low occupancy, and outstanding pattern recognition. Finally, some update parameters and experiments results were compared.
△ Less
Submitted 18 February, 2021;
originally announced February 2021.
-
Magnetic Dynamic Polymers for Modular Assembling and Reconfigurable Morphing Architectures
Authors:
Xiao Kuang,
Shuai Wu,
Yi **,
Qiji Ze,
S. Macrae Montgomery,
Liang Yue,
H. Jerry Qi,
Ruike Zhao
Abstract:
Shape morphing magnetic soft materials, composed of magnetic particles in a soft polymer matrix, can transform shapes reversibly, remotely, and rapidly, finding diverse applications in actuators, soft robotics, and biomedical devices. To achieve on-demand and sophisticated shape morphing, the manufacturing of structures with complex geometry and magnetization distribution is highly desired. Here,…
▽ More
Shape morphing magnetic soft materials, composed of magnetic particles in a soft polymer matrix, can transform shapes reversibly, remotely, and rapidly, finding diverse applications in actuators, soft robotics, and biomedical devices. To achieve on-demand and sophisticated shape morphing, the manufacturing of structures with complex geometry and magnetization distribution is highly desired. Here, we report a magnetic dynamic polymer composite composed of hard-magnetic microparticles in a dynamic polymer network with thermal-responsive reversible linkages, which permit functionalities including targeted welding, magnetization reprogramming, and structural reconfiguration. These functions not only provide highly desirable structural and material programmability and reprogrammability but also enable the manufacturing of structures with complex geometry and magnetization distribution. The targeted welding is exploited for modular assembling of fundamental building modules with specific logics for complex actuation. The magnetization reprogramming enables altering the morphing mode of the manufactured structures. The shape reconfiguration under magnetic actuation is coupled with network plasticity to remotely transform two-dimensional tessellations into complex three-dimensional architectures, providing a new strategy of manufacturing functional soft architected materials such as three-dimensional kirigami. We anticipate that the reported magnetic dynamic polymer provides a new paradigm for the design and manufacturing of future multifunctional assemblies and reconfigurable morphing architectures and devices.
△ Less
Submitted 16 November, 2020;
originally announced November 2020.
-
Giant Thermal Magnetoresistance Driven by Graphene Magnetoplasmon
Authors:
Ming-Jian He,
Hong Qi,
Yan-Xiong Su,
Ya-Tao Ren,
Yi-Jun Zhao,
Mauro Antezza
Abstract:
In this work, we have predicted a giant thermal magnetoresistance for the thermal photon transport based on the tunable magnetoplasmon of graphene. By applying an external magnetic field, we find that the heat flux can be modulated by approximately three orders of magnitude. Accordingly, negative and giant relative thermal magnetoresistance ratios are both achieved for magnetic fields with a maxim…
▽ More
In this work, we have predicted a giant thermal magnetoresistance for the thermal photon transport based on the tunable magnetoplasmon of graphene. By applying an external magnetic field, we find that the heat flux can be modulated by approximately three orders of magnitude. Accordingly, negative and giant relative thermal magnetoresistance ratios are both achieved for magnetic fields with a maximum strength of 4 Tesla. This effect is mainly caused by the suppression and enhancement of scattering interactions mediated by graphene magnetoplasmon. Specifically, it has never been achieved before for nanoparticles, which have no response to magnetic fields. The effect is remarkable at these reasonable strengths of fields, and thus has considerable significance for the real-life applications. It is also expected to enable technological advances for the thermal measurement-based magnetic sensor and magnetically thermal management.
△ Less
Submitted 19 July, 2020;
originally announced July 2020.
-
Radiative thermal switch via asymmetric black phosphorus gratings
Authors:
Ming-Jian He,
Hong Qi,
Ya-Tao Ren,
Yi-Jun Zhao,
Yong Zhang,
Jia-Dong Shen,
Mauro Antezza
Abstract:
Active control of heat transfer at the nanoscale has great potentials in thermal logic and energy conversion devices. In the present work, we theoretically propose a radiative thermal switch (RTS) composed of a pair of asymmetric black phosphorus (BP) gratings, with BP nanoribbons periodically patterned in different directions. The simply mechanical rotation between the gratings enables substantia…
▽ More
Active control of heat transfer at the nanoscale has great potentials in thermal logic and energy conversion devices. In the present work, we theoretically propose a radiative thermal switch (RTS) composed of a pair of asymmetric black phosphorus (BP) gratings, with BP nanoribbons periodically patterned in different directions. The simply mechanical rotation between the gratings enables substantial modulation of near-field radiative heat transfer, especially when combined with the use of non-identical parameters, i.e., filling factors and electron densities of BP. Among all the cases including asymmetric BP gratings, symmetric BP gratings, and BP films, we find that the asymmetric BP gratings possess the most excellent switching performance. The optimized switching factors can be as high as 90% with the vacuum separation d=50 nm and higher than 70% even in the far-field regime. The high-performance switching is basically attributed to the rotatable-tunable matching degree between the surface characteristics of the two asymmetric gratings. Moreover, due to the twisting principle, the RTS can work at any temperature, which has great advantage over the phase change materials-based RTS. The proposed switching scheme has great significance for the applications in thermal management and thermal circuits.
△ Less
Submitted 27 August, 2020; v1 submitted 1 July, 2020;
originally announced July 2020.
-
Magneto-Mechanical Metamaterials with Widely Tunable Mechanical Properties and Acoustic Bandgaps
Authors:
S. Macrae Montgomery,
Shuai Wu,
Xiao Kuang,
Connor D. Armstrong,
Cole Zemelka,
Qiji Ze,
Rundong Zhang,
Ruike Zhao,
H. Jerry Qi
Abstract:
Mechanical metamaterials are architected manmade materials that allow for unique behaviors not observed in nature, making them promising candidates for a wide range of applications. Existing metamaterials lack tunability as their properties can only be changed to a limited extent after the fabrication. In this paper, we present a new magneto-mechanical metamaterial that allows great tunability thr…
▽ More
Mechanical metamaterials are architected manmade materials that allow for unique behaviors not observed in nature, making them promising candidates for a wide range of applications. Existing metamaterials lack tunability as their properties can only be changed to a limited extent after the fabrication. In this paper, we present a new magneto-mechanical metamaterial that allows great tunability through a novel concept of deformation mode branching. The architecture of this new metamaterial employs an asymmetric joint design using hard-magnetic soft active materials that permits two distinct actuation modes (bending and folding) under opposite-direction magnetic fields. The subsequent application of mechanical forces leads to the deformation mode branching where the metamaterial architecture transforms into two distinctly different shapes, which exhibit very different deformations and enable great tunability in properties such as mechanical stiffness and acoustic bandgaps. Furthermore, this metamaterial design can be incorporated with magnetic shape memory polymers with global stiffness tunability, which further enables the global shift of the acoustic behaviors. The combination of magnetic and mechanical actuations, as well as shape memory effects, imbue unmatched tunable properties to a new paradigm of metamaterials.
△ Less
Submitted 22 June, 2020;
originally announced June 2020.
-
Magnetoplasmon-surface phonon polaritons coupling effects in radiative heat transfer
Authors:
Mingjian He,
Hong Qi,
Yatao Ren,
Yijun Zhao,
Mauro Antezza
Abstract:
In this letter, based on the quantum Hall regime of magneto-optical graphene, we have theoretically investigated the coupling of magnetoplasmon polaritons (MPP) to surface phonon polaritons (SPhPs) by investigating the radiative heat transfer between two graphene-coated SiO2 slabs. By applying an external magnetic field, the separated branches of intraband and interband MPP can both couple with SP…
▽ More
In this letter, based on the quantum Hall regime of magneto-optical graphene, we have theoretically investigated the coupling of magnetoplasmon polaritons (MPP) to surface phonon polaritons (SPhPs) by investigating the radiative heat transfer between two graphene-coated SiO2 slabs. By applying an external magnetic field, the separated branches of intraband and interband MPP can both couple with SPhPs to form tunable modes, which remould the energy transport of the system. The heat transfer mechanism is completely changed from enhancement to attenuation due to the strong coupling, and the thermal stealthy is realized for the graphene. The letter has great significance for the graphene-based magneto-optical devices.
△ Less
Submitted 11 June, 2020;
originally announced June 2020.
-
Layout and Performance of HPK Prototype LGAD Sensors for the High-Granularity Timing Detector
Authors:
X. Yang,
S. Alderweireldt,
N. Atanov,
M. K. Ayoub,
J. Barreiro Guimaraes da Costa,
L. Castillo Garcia,
H. Chen,
S. Christie,
V. Cindro,
H. Cui,
G. D'Amen,
Y. Davydov,
Y. Y. Fan,
Z. Galloway,
J. J. Ge,
C. Gee,
G. Giacomini,
E. L. Gkougkousis,
C. Grieco,
S. Grinstein,
J. Grosse-Knetter,
S. Guindon,
S. Han,
A. Howard,
Y. P. Huang
, et al. (54 additional authors not shown)
Abstract:
The High-Granularity Timing Detector is a detector proposed for the ATLAS Phase II upgrade. The detector, based on the Low-Gain Avalanche Detector (LGAD) technology will cover the pseudo-rapidity region of $2.4<|η|<4.0$ with two end caps on each side and a total area of 6.4 $m^2$. The timing performance can be improved by implanting an internal gain layer that can produce signal with a fast rising…
▽ More
The High-Granularity Timing Detector is a detector proposed for the ATLAS Phase II upgrade. The detector, based on the Low-Gain Avalanche Detector (LGAD) technology will cover the pseudo-rapidity region of $2.4<|η|<4.0$ with two end caps on each side and a total area of 6.4 $m^2$. The timing performance can be improved by implanting an internal gain layer that can produce signal with a fast rising edge, which improve significantly the signal-to-noise ratio. The required average timing resolution per track for a minimum-ionising particle is 30 ps at the start and 50 ps at the end of the HL-LHC operation. This is achieved with several layers of LGAD. The innermost region of the detector would accumulate a 1 MeV-neutron equivalent fluence up to $2.5 \times 10^{15} cm^{-2}$ before being replaced during the scheduled shutdowns. The addition of this new detector is expected to play an important role in the mitigation of high pile-up at the HL-LHC. The layout and performance of the various versions of LGAD prototypes produced by Hamamatsu (HPK) have been studied by the ATLAS Collaboration. The breakdown voltages, depletion voltages, inter-pad gaps, collected charge as well as the time resolution have been measured and the production yield of large size sensors has been evaluated.
△ Less
Submitted 31 March, 2020;
originally announced March 2020.
-
Active control of near-field radiative heat transfer by coating-twisting method
Authors:
Mingjian He,
Hong Qi,
Yatao Ren,
Yijun Zhao,
Mauro Antezza
Abstract:
In this letter, active control of near-field radiative heat transfer (NFRHT) between two isotropic materials is realized by a coating-twisting method. The two slabs are coated with graphene gratings, and then the NFRHT can be not only enhanced, but also weakened, by tuning the twisted angle between the two gratings. The physical mechanism is attributed to the modes coupled by the graphene gratings…
▽ More
In this letter, active control of near-field radiative heat transfer (NFRHT) between two isotropic materials is realized by a coating-twisting method. The two slabs are coated with graphene gratings, and then the NFRHT can be not only enhanced, but also weakened, by tuning the twisted angle between the two gratings. The physical mechanism is attributed to the modes coupled by the graphene gratings and the isotropic material, which can vary with the twisted angle. The proposed method is also applicable for other kinds of anisotropic films, and may provide a way to realize high-precision nanoscale thermal management, nimble thermal communications and thermal switch.
△ Less
Submitted 16 March, 2020;
originally announced March 2020.
-
Evolutionary Algorithm Guided Voxel-Encoding Printing of Functional Hard-Magnetic Soft Active Materials
Authors:
Shuai Wu,
Craig M. Hamel,
H. Jerry Qi,
Ruike Zhao
Abstract:
Hard-magnetic soft active materials (hmSAMs) have attracted a great amount of research interests due to their fast-transforming, untethered control, as well as excellent programmability. However, the current direct-ink-write (DIW) printing-based fabrication of hmSAM parts and structures only permits programmable magnetic direction with a constant magnetic density. Also, the existing designs rely o…
▽ More
Hard-magnetic soft active materials (hmSAMs) have attracted a great amount of research interests due to their fast-transforming, untethered control, as well as excellent programmability. However, the current direct-ink-write (DIW) printing-based fabrication of hmSAM parts and structures only permits programmable magnetic direction with a constant magnetic density. Also, the existing designs rely on the brute-force approach to generate the assignment of magnetization direction distribution, which can only produce intuitional deformations. These two factors greatly limit the design space and the application potentials of hmSAMs. In this work, we introduce a voxel-encoding DIW printing method to program both the magnetic density and direction distributions during the hmSAM printing. The voxel-encoding DIW printing is then integrated with an evolutionary algorithm (EA)-based design strategy to achieve the desired magnetic actuation and motion with complex geometry variations and curvature distributions. With the new EA-guided voxel-encoding DIW printing technique, we demonstrate the functional hmSAMs that produce complicated shape morphing with desired curvature distributions for advanced applications such as biomimetic motions. These demonstrations indicate that the proposed EA-guided voxel-encoding DIW printing method can significantly broaden the application potentials of the hmSAMs.
△ Less
Submitted 30 January, 2020;
originally announced January 2020.
-
New methodology based on energy flux similarity for large-eddy simulation of transitional and turbulent flows
Authors:
Han Qi,
Xinliang Li,
Hao Zhou,
Chang** Yu
Abstract:
A new methodology based on energy flux similarity is suggested in this paper for large eddy simulation (LES) of transitional and turbulent flows. Existing knowledge reveals that the energy cascade generally exists in transitional and turbulent flows with different distributions, and the characteristic quantity of scale interaction in energy cascade processes is energy flux. Therefore, energy flux…
▽ More
A new methodology based on energy flux similarity is suggested in this paper for large eddy simulation (LES) of transitional and turbulent flows. Existing knowledge reveals that the energy cascade generally exists in transitional and turbulent flows with different distributions, and the characteristic quantity of scale interaction in energy cascade processes is energy flux. Therefore, energy flux similarity is selected as the basic criterion to secure the flow field getting from LES highly similar to the real flow field. Through a priori tests, we find that the energy flux from the tensor-diffusivity (TD) model has high similarity with the real energy flux. Then, we modify the modelled energy flux from the TD model and obtain uniform formulas of energy flux similarity corresponding to different filter widths and locations in the wall-bounded turbulence. To secure the robustness of simulation and the LES results similar to the real flow, we apply the energy flux similarity method (EFSM) to the Smagorinsky model in the LES of compressible turbulent channel flow, compressible flat-plate flow, and flow over a compressible ramp. The a posteriori tests show that, overall, EFSM can better predict these flows than other subgrid-scale models. In the simulation of turbulent channel flow, EFSM can accurately predict the mean stream-wise velocity, Reynolds stress, and affluent coherent structures. In LES of compressible flat-plate flow, EFSM could provide accurate simulation results of the onset of transition and transition peak, skin friction, and mean stream-wise velocity in cases with three different grid scales. Meanwhile, for flow over a compressible ramp, EFSM could correctly describe the process of bypass transition, locations of separation and reattachment in the corner region, and abundant coherent vortex structures, etc.
△ Less
Submitted 28 October, 2019;
originally announced October 2019.
-
The detection of acute kidney injury with hyperpolarized 13C Urea and multi-exponential fitting
Authors:
James T Grist,
Christian Østergaard Mariager,
Haiyun Qi,
Per Mose Nielsen,
Christoffer Laustsen
Abstract:
Purpose: To assess the utility of Laplacian fitting to describe the differences in hyperpolarized 13C urea T2 relaxation in ischemic and healthy rodent kidneys. Theory and Methods: Six rats with unilateral renal ischemia were investigated. 13C urea T2 map** was undertaken with a radial fast spin echo method, with subsequent post-processing performed with regularised Laplacian fitting. Results: S…
▽ More
Purpose: To assess the utility of Laplacian fitting to describe the differences in hyperpolarized 13C urea T2 relaxation in ischemic and healthy rodent kidneys. Theory and Methods: Six rats with unilateral renal ischemia were investigated. 13C urea T2 map** was undertaken with a radial fast spin echo method, with subsequent post-processing performed with regularised Laplacian fitting. Results: Simulations showed that Laplacian fitting was stable down to a signal to noise ratio of 20. In vivo results showed a significant increase in the mono- and decrease in bi-exponential pools in IRI kidneys, in comparison to healthy (14+-10% vs 4+-2%, 85+-10% vs 95+-3%, p<0.05). Conclusion: We demonstrate, for the first time, the differences in multi-exponential behaviour of 13C,15N2-urea between the healthy and ischemic rodent kidney. The distribution of relaxation pools were found to be both visually and numerically significantly different. The ability to improve the information level in hyperpolarized MR, by utilizing the relaxation contrast mechanisms is an appealing option, that can easily be adopted in large animals and even in clinical studies in the near future.
△ Less
Submitted 24 October, 2019;
originally announced October 2019.
-
Magnetic Shape Memory Polymers with Integrated Multifunctional Shape Manipulations
Authors:
Qiji Ze,
Xiao Kuang,
Shuai Wu,
Janet Wong,
S. Macrae Montgomery,
Rundong Zhang,
Joshua M. Kovitz,
Fengyuan Yang,
H. Jerry Qi,
Ruike Zhao
Abstract:
Shape-programmable soft materials that exhibit integrated multifunctional shape manipulations, including reprogrammable, untethered, fast, and reversible shape transformation and locking, are highly desirable for a plethora of applications, including soft robotics, morphing structures, and biomedical devices. Despite recent progress, it remains challenging to achieve multiple shape manipulations i…
▽ More
Shape-programmable soft materials that exhibit integrated multifunctional shape manipulations, including reprogrammable, untethered, fast, and reversible shape transformation and locking, are highly desirable for a plethora of applications, including soft robotics, morphing structures, and biomedical devices. Despite recent progress, it remains challenging to achieve multiple shape manipulations in one material system. Here, we report a novel magnetic shape memory polymer composite to achieve this. The composite consists of two types of magnetic particles in an amorphous shape memory polymer matrix. The matrix softens via magnetic inductive heating of low-coercivity particles, and high-remanence particles with reprogrammable magnetization profiles drive the rapid and reversible shape change under actuation magnetic fields. Once cooled, the actuated shape can be locked. Additionally, varying the particle loadings for heating enables sequential actuation. The integrated multifunctional shape manipulations are further exploited for applications including soft magnetic grippers with large grabbing force, sequential logic for computing, and reconfigurable antennas.
Keyword: shape memory polymers, soft active materials, magnetic soft material, soft robotics, soft material computing
△ Less
Submitted 28 September, 2019;
originally announced September 2019.
-
Feasibility study of TPC tracker detector for the circular collider
Authors:
Zhiyang Yuan,
Huirong Qi,
Haiyun Wang,
Ling Liu,
Yuanbo Chen,
Qun Ouyang,
Jian Zhang,
Yiming Cai,
Yulan Li
Abstract:
The discovery of a SM Higgs boson at the LHC brought about great opportunity to investigate the feasibility of a Circular Electron Positron Collider (CEPC) operating at center-of-mass energy of $\sim 240$ GeV, as a Higgs factory, with designed luminosity of about $2\times 10^{34}cm^{-2}s^{-1}$. The CEPC provides a much cleaner collision environment than the LHC, it is ideally suited for studying t…
▽ More
The discovery of a SM Higgs boson at the LHC brought about great opportunity to investigate the feasibility of a Circular Electron Positron Collider (CEPC) operating at center-of-mass energy of $\sim 240$ GeV, as a Higgs factory, with designed luminosity of about $2\times 10^{34}cm^{-2}s^{-1}$. The CEPC provides a much cleaner collision environment than the LHC, it is ideally suited for studying the properties of Higgs boson with greater precision. Another advantage of the CEPC over the LHC is that the Higgs boson can be detected through the recoil mass method by only reconstructing Z boson decay without examining the Higgs decays. In Concept Design Report(CDR), the circumference of CEPC is 100km, with two interaction points available for exploring different detector design scenarios and technologies. The baseline design of CEPC detector is an ILD-like concept, with a superconducting solenoid of 3.0 Tesla surrounding the inner silicon detector, TPC tracker detector and the calorimetry system. Time Projection Chambers (TPCs) have been extensively studied and used in many fields, especially in particle physics experiments, including STAR and ALICE. The TPC detector will operate in continuous mode on the circular machine. To fulfill the physics goals of the future circular collider and meet Higgs/$Z$ run, a TPC with excellent performance is required. We have proposed and investigated the ions controlling performance of a novel configuration detector module. The aim of this study is to suppress ion backflow ($IBF$) continually. In this paper, some update results of the feasibility and limitation on TPC detector technology R$\&$D will be given using the hybrid gaseous detector module.
△ Less
Submitted 28 April, 2019;
originally announced April 2019.
-
Measurement of the electron transmission rate of the gating foil for the TPC of the ILC experiment
Authors:
M. Kobayashi,
T. Ogawa,
A. Shoji,
Y. Aoki,
K. Ikematsu,
P. Gros,
T. Kawaguchi,
D. Arai,
M. Iwamura,
K. Katsuki,
A. Koto,
M. Yoshikai,
K. Fujii,
T. Fusayasu,
Y. Kato,
S. Kawada,
T. Matsuda,
S. Narita,
K. Negishi,
H. Qi,
R. D. Settles,
A. Sugiyama,
T. Takahashi,
J. Tian,
T. Watanabe
, et al. (1 additional authors not shown)
Abstract:
We have developed a gating foil for the time projection chamber envisaged as a central tracker for the international linear collider experiment. It has a structure similar to the Gas Electron Multiplier (GEM) with a higher optical aperture ratio and functions as an ion gate without gas amplification. The transmission rate for electrons was measured in a counting mode for a wide range of the voltag…
▽ More
We have developed a gating foil for the time projection chamber envisaged as a central tracker for the international linear collider experiment. It has a structure similar to the Gas Electron Multiplier (GEM) with a higher optical aperture ratio and functions as an ion gate without gas amplification. The transmission rate for electrons was measured in a counting mode for a wide range of the voltages applied across the foil using an $^{55}$Fe source and a laser in the absence of a magnetic field. The blocking power of the foil against positive ions was estimated from the electron transmissions.
△ Less
Submitted 1 May, 2019; v1 submitted 5 March, 2019;
originally announced March 2019.
-
Production of photonic universal quantum gates enhanced by machine learning
Authors:
Krishna Kumar Sabapathy,
Haoyu Qi,
Josh Izaac,
Christian Weedbrook
Abstract:
We introduce photonic architectures for universal quantum computation. The first step is to produce a resource state which is a superposition of the first four Fock states with a probability $\geq 10^{-2}$, an increase by a factor of $10^4$ over standard sequential photon-subtraction techniques. The resource state is produced with near-perfect fidelity from a quantum gadget that uses displaced squ…
▽ More
We introduce photonic architectures for universal quantum computation. The first step is to produce a resource state which is a superposition of the first four Fock states with a probability $\geq 10^{-2}$, an increase by a factor of $10^4$ over standard sequential photon-subtraction techniques. The resource state is produced with near-perfect fidelity from a quantum gadget that uses displaced squeezed vacuum states, interferometers and photon-number resolving detectors. The parameters of this gadget are trained using machine learning algorithms for variational circuits. We discuss in detail various aspects of the non-Gaussian state preparation resulting from the numerical experiments. We then propose a notion of resource farms where these gadgets are stacked in parallel, to increase the success probability further. We find a trade-off between the success probability of the farm, the error tolerance, and the number of gadgets. Using the resource states in conventional gate teleportation techniques we can then implement weak tuneable cubic phase gates. The numerical tools that have been developed could potentially be useful for other applications in photonics as well.
△ Less
Submitted 5 September, 2019; v1 submitted 12 September, 2018;
originally announced September 2018.
-
Controlling spectral energies of all harmonics in programmable way using time-domain digital coding metasurface
Authors:
Jie Zhao,
Xi Yang,
Jun Yan Dai,
Qiang Cheng,
Xiang Li,
Ning Hua Qi,
Jun Chen Ke,
Guo Dong Bai,
Shuo Liu,
Shi **,
Tie Jun Cui
Abstract:
Modern wireless communication is one of the most important information technologies, but its system architecture has been unchanged for many years. Here, we propose a much simpler architecture for wireless communication systems based on metasurface. We firstly propose a time-domain digital coding metasurface to reach a simple but efficient method to manipulate spectral distributions of harmonics.…
▽ More
Modern wireless communication is one of the most important information technologies, but its system architecture has been unchanged for many years. Here, we propose a much simpler architecture for wireless communication systems based on metasurface. We firstly propose a time-domain digital coding metasurface to reach a simple but efficient method to manipulate spectral distributions of harmonics. Under dynamic modulations of phases on surface reflectivity, we could achieve accurate controls to different harmonics in a programmable way to reach many unusual functions like frequency cloaking and velocity illusion, owing to the temporal gradient introduced by digital signals encoded by '0' and '1' sequences. A theoretical model is presented and experimentally validated to reveal the nonlinear process. Based on the time-domain digital coding metasurface, we propose and realize a new wireless communication system in binary frequency-shift keying (BFSK) frame, which has much more simplified architecture than the traditional BFSK with excellent performance for real-time message transmission. The presented work, from new concept to new system, will find important applications in modern information technologies.
△ Less
Submitted 12 June, 2018;
originally announced June 2018.
-
Feasibility study of TPC at electron positron colliders at $Z$ pole operation
Authors:
Mingrui Zhao,
Manqi Ruan,
Huirong Qi,
Yuanning Gao
Abstract:
TPC is a promising technology for the future electron positron colliders. However, its application might be limited at high event rate and high hit occupancies. In this paper, we study the feasibility of using TPC at the circular electron positron collider (CEPC) at $Z$ pole using full simulated $Z \rightarrow q\bar{q}$ samples. By evaluating the local charge density and voxel occupancy at differe…
▽ More
TPC is a promising technology for the future electron positron colliders. However, its application might be limited at high event rate and high hit occupancies. In this paper, we study the feasibility of using TPC at the circular electron positron collider (CEPC) at $Z$ pole using full simulated $Z \rightarrow q\bar{q}$ samples. By evaluating the local charge density and voxel occupancy at different TPC parameters. Our study shows that the TPC could be applied to the CEPC $Z$ pole operation if back flow ion is controlled to per mille level. We also suggest the applicable TPC parameters for FCC-ee $Z$ pole operations, whose instant luminosity is $2\times 10^{36} \mathrm{cm^2\,s^{-1}}$, 2 orders of magnitude higher than that of CEPC.
△ Less
Submitted 14 April, 2017;
originally announced April 2017.
-
Luminosity measurements for the R scan experiment at BESIII
Authors:
M. Ablikim,
M. N. Achasov,
S. Ahmed,
X. C. Ai,
O. Albayrak,
M. Albrecht,
D. J. Ambrose,
A. Amoroso,
F. F. An,
Q. An,
J. Z. Bai,
O. Bakina,
R. Baldini Ferroli,
Y. Ban,
D. W. Bennett,
J. V. Bennett,
N. Berger,
M. Bertani,
D. Bettoni,
J. M. Bian,
F. Bianchi,
E. Boger,
I. Boyko,
R. A. Briere,
H. Cai
, et al. (405 additional authors not shown)
Abstract:
By analyzing the large-angle Bhabha scattering events $e^{+}e^{-}$ $\to$ ($γ$)$e^{+}e^{-}$ and diphoton events $e^{+}e^{-}$ $\to$ $γγ$ for the data sets collected at center-of-mass (c.m.) energies between 2.2324 and 4.5900 GeV (131 energy points in total) with the upgraded Bei**g Spectrometer (BESIII) at the Bei**g Electron-Positron Collider (BEPCII), the integrated luminosities have been measur…
▽ More
By analyzing the large-angle Bhabha scattering events $e^{+}e^{-}$ $\to$ ($γ$)$e^{+}e^{-}$ and diphoton events $e^{+}e^{-}$ $\to$ $γγ$ for the data sets collected at center-of-mass (c.m.) energies between 2.2324 and 4.5900 GeV (131 energy points in total) with the upgraded Bei**g Spectrometer (BESIII) at the Bei**g Electron-Positron Collider (BEPCII), the integrated luminosities have been measured at the different c.m. energies, individually. The results are the important inputs for R value and $J/ψ$ resonance parameter measurements.
△ Less
Submitted 11 February, 2017;
originally announced February 2017.
-
Spatial resolution measurement of Triple-GEM detector and diffraction imaging test at synchrotron radiation
Authors:
Y. L. Zhang,
H. R. Qi,
Z. W. Wen,
H. Y. Wang,
Q. Ouyang,
Y. B. Chen,
J. Zhang,
B. T. Hu
Abstract:
A triple-GEM detector with two-dimensional readout is developed. The detector provides high position resolution for powder diffraction experiments at synchrotron radiation. Spatial resolution of the detector is measured in the lab using a 55Fe X-ray source. A resolution of about 110 um FWHM is achieved. The energy resolution is better than 27% for 5.9 keV X-rays. The detector's validity under illu…
▽ More
A triple-GEM detector with two-dimensional readout is developed. The detector provides high position resolution for powder diffraction experiments at synchrotron radiation. Spatial resolution of the detector is measured in the lab using a 55Fe X-ray source. A resolution of about 110 um FWHM is achieved. The energy resolution is better than 27% for 5.9 keV X-rays. The detector's validity under illumination of photons in particular energy range is verified using a Cu X-ray tube. Imaging of the head of a wire stripper with X-ray tube demonstrates its imaging ability. A diffraction imaging experiment using the sample of powder SiO2 is successfully carried out at 1W2B laboratory of Bei**g Synchrotron Radiation Facility (BSRF). Different diffraction rings are clearly seen under various X-ray energies.
△ Less
Submitted 10 February, 2017;
originally announced February 2017.
-
A hybrid structure gaseous detector for ion backflow suppression*
Authors:
YuLian Zhang,
HuiRong Qi,
BiTao Hu,
Hai-Yun Wang,
Qun Ou-Yang,
Yuan-Bo Chan,
Jian Zhang,
Zhi-Wen Wen
Abstract:
A new concept for a hybrid structure gaseous detector module with ion backflow suppression for the time projection chamber in a future circular collider is presented. It is a hybrid structure cascaded Gas Electron Multiplier (GEM) with a Micromegas detector. Both Micromegas and GEM have the capability to naturally reduce most of the ions produced in the amplification region. The GEM also acts as t…
▽ More
A new concept for a hybrid structure gaseous detector module with ion backflow suppression for the time projection chamber in a future circular collider is presented. It is a hybrid structure cascaded Gas Electron Multiplier (GEM) with a Micromegas detector. Both Micromegas and GEM have the capability to naturally reduce most of the ions produced in the amplification region. The GEM also acts as the preamplifer device and increases gas gain together with the Micromegas. Feasibility tests of the hybrid detector are performed using an ${}^{55}$Fe X-ray source. The energy resolution is better than 27% for 5.9 keV X-rays. It is demonstrated that a backflow ratio better than 0.2% can be reached in the hybrid readout structure at a gain of 5000.
△ Less
Submitted 31 March, 2017; v1 submitted 26 September, 2016;
originally announced September 2016.
-
Development of a two-dimensional imaging GEM detector using the resistive anode readout method with $6\times6$ cells
Authors:
Xu-Dong Ju,
Ming-Yi Dong,
Chuan-Xing Zhou,
**g Dong,
Yu-Bin Zhao,
Hong-Yu Zhang,
Hui-Rong Qi,
Qun Ou-Yang
Abstract:
We report the application of the resistive anode readout method on a two dimensional imaging GEM detector. The resistive anode consists of $6\times6$ cells with the cell size $6~\mathrm{mm}\times6~\mathrm{mm}$. New electronics and DAQ system are used to process the signals from the 49 readout channels. The detector has been tested by using the X-ray tube (8~keV). The spatial resolution of the dete…
▽ More
We report the application of the resistive anode readout method on a two dimensional imaging GEM detector. The resistive anode consists of $6\times6$ cells with the cell size $6~\mathrm{mm}\times6~\mathrm{mm}$. New electronics and DAQ system are used to process the signals from the 49 readout channels. The detector has been tested by using the X-ray tube (8~keV). The spatial resolution of the detector is about $103.46~\mathrm{μm}$ with the detector response part about $66.41~\mathrm{μm}$. The nonlinearity of the detector is less than $1.5\%$. A quite good two dimensional imaging capability is achieved as well. The performances of the detector show the prospect of the resistive anode readout method for the large readout area imaging detectors.
△ Less
Submitted 5 September, 2016; v1 submitted 14 August, 2016;
originally announced August 2016.
-
New Online Ecology of Adversarial Aggregates: ISIS and beyond
Authors:
N. F. Johnson,
M. Zheng,
Y. Vorobyeva,
A. Gabriel,
H. Qi,
N. Velasquez,
P. Manrique,
D. Johnson,
E. Restrepo,
C. Song,
S. Wuchty
Abstract:
Support for extremist entities - whether from the far right, or far left - often manages to survive globally online despite significant external pressure, and may ultimately inspire violent acts by individuals having no obvious prior history of extremism. Examining longitudinal records of extremist online activity, we uncovered an ecology evolving on a daily timescale that drives online support, a…
▽ More
Support for extremist entities - whether from the far right, or far left - often manages to survive globally online despite significant external pressure, and may ultimately inspire violent acts by individuals having no obvious prior history of extremism. Examining longitudinal records of extremist online activity, we uncovered an ecology evolving on a daily timescale that drives online support, and we provide a mathematical theory that describes it. The ecology features self-organized aggregates (online groups such as on Facebook or another social media analog) that proliferate preceding the onset of recent real-world campaigns, and adopt novel adaptive mechanisms to enhance their survival. One of the predictions is that development of large, potentially potent online groups can be thwarted by targeting smaller ones.
△ Less
Submitted 27 June, 2017; v1 submitted 30 March, 2016;
originally announced March 2016.
-
Calibration of the Advanced LIGO detectors for the discovery of the binary black-hole merger GW150914
Authors:
The LIGO Scientific Collaboration,
B. P. Abbott,
R. Abbott,
T. D. Abbott,
M. R. Abernathy,
K. Ackley,
C. Adams,
P. Addesso,
R. X. Adhikari,
V. B. Adya,
C. Affeldt,
N. Aggarwal,
O. D. Aguiar,
A. Ain,
P. Ajith,
B. Allen,
P. A. Altin,
D. V. Amariutei,
S. B. Anderson,
W. G. Anderson,
K. Arai,
M. C. Araya,
C. C. Arceneaux,
J. S. Areeda,
K. G. Arun
, et al. (702 additional authors not shown)
Abstract:
In Advanced LIGO, detection and astrophysical source parameter estimation of the binary black hole merger GW150914 requires a calibrated estimate of the gravitational-wave strain sensed by the detectors. Producing an estimate from each detector's differential arm length control loop readout signals requires applying time domain filters, which are designed from a frequency domain model of the detec…
▽ More
In Advanced LIGO, detection and astrophysical source parameter estimation of the binary black hole merger GW150914 requires a calibrated estimate of the gravitational-wave strain sensed by the detectors. Producing an estimate from each detector's differential arm length control loop readout signals requires applying time domain filters, which are designed from a frequency domain model of the detector's gravitational-wave response. The gravitational-wave response model is determined by the detector's opto-mechanical response and the properties of its feedback control system. The measurements used to validate the model and characterize its uncertainty are derived primarily from a dedicated photon radiation pressure actuator, with cross-checks provided by optical and radio frequency references. We describe how the gravitational-wave readout signal is calibrated into equivalent gravitational-wave-induced strain and how the statistical uncertainties and systematic errors are assessed. Detector data collected over 38 calendar days, from September 12 to October 20, 2015, contain the event GW150914 and approximately 16 of coincident data used to estimate the event false alarm probability. The calibration uncertainty is less than 10% in magnitude and 10 degrees in phase across the relevant frequency band 20 Hz to 1 kHz.
△ Less
Submitted 28 February, 2017; v1 submitted 11 February, 2016;
originally announced February 2016.
-
Anomalous Contagion and Renormalization in Dynamical Networks with Nodal Mobility
Authors:
Pedro D. Manrique,
Hong Qi,
Minzhang Zheng,
Chen Xu,
Pak Ming Hui,
Neil F. Johnson
Abstract:
The common real-world feature of individuals migrating through a network -- either in real space or online -- significantly complicates understanding of network processes. Here we show that even though a network may appear static on average, underlying nodal mobility can dramatically distort outbreak profiles. Highly nonlinear dynamical regimes emerge in which increasing mobility either amplifies…
▽ More
The common real-world feature of individuals migrating through a network -- either in real space or online -- significantly complicates understanding of network processes. Here we show that even though a network may appear static on average, underlying nodal mobility can dramatically distort outbreak profiles. Highly nonlinear dynamical regimes emerge in which increasing mobility either amplifies or suppresses outbreak severity. Predicted profiles mimic recent outbreaks of real-space contagion (social unrest) and online contagion (pro-ISIS support). We show that this nodal mobility can be renormalized in a precise way for a particular class of dynamical networks.
△ Less
Submitted 18 November, 2015;
originally announced November 2015.
-
Social media affects the timing, location, and severity of school shootings
Authors:
J. Garcia-Bernardo,
H. Qi,
J. M. Shultz,
A. M. Cohen,
N. F. Johnson,
P. S. Dodds
Abstract:
Over the past two decades, school shootings within the United States have repeatedly devastated communities and shaken public opinion. Many of these attacks appear to be `lone wolf' ones driven by specific individual motivations, and the identification of precursor signals and hence actionable policy measures would thus seem highly unlikely. Here, we take a system-wide view and investigate the tim…
▽ More
Over the past two decades, school shootings within the United States have repeatedly devastated communities and shaken public opinion. Many of these attacks appear to be `lone wolf' ones driven by specific individual motivations, and the identification of precursor signals and hence actionable policy measures would thus seem highly unlikely. Here, we take a system-wide view and investigate the timing of school attacks and the dynamical feedback with social media. We identify a trend divergence in which college attacks have continued to accelerate over the last 25 years while those carried out on K-12 schools have slowed down. We establish the copycat effect in school shootings and uncover a statistical association between social media chatter and the probability of an attack in the following days. While hinting at causality, this relationship may also help mitigate the frequency and intensity of future attacks.
△ Less
Submitted 5 November, 2018; v1 submitted 20 June, 2015;
originally announced June 2015.
-
Tunable narrow band source via the strong coupling between optical emitter and nanowire surface plasmons
Authors:
J. Yang,
G. W. Lin,
Y. P. Niu,
Y. H. Qi,
F. X. Zhou,
S. Q. Gong
Abstract:
The spectrum width can be narrowed to a certain degree by decreasing the coupling strength for the two-level emitter coupled to the propagating surface plasmon. But the width can not be narrowed any further because of the loss of the photon out of system by spontaneous emission from the emitter. Here we propose a new scheme to construct a narrow-band source via a one-dimensional waveguide coupling…
▽ More
The spectrum width can be narrowed to a certain degree by decreasing the coupling strength for the two-level emitter coupled to the propagating surface plasmon. But the width can not be narrowed any further because of the loss of the photon out of system by spontaneous emission from the emitter. Here we propose a new scheme to construct a narrow-band source via a one-dimensional waveguide coupling with a three-level emitter. It is shown that the reflective spectrum width can be narrowed avoiding the impact of the loss. This approach opens up the possibility of plasmonic ultranarrow single-photon source.
△ Less
Submitted 29 December, 2014;
originally announced December 2014.
-
Study on the effect of humidity and dust on leakage current of bulk micro-MEGAS detector
Authors:
Bo Wang,
Yu-lian Zhang,
Hui-Rong Qi,
**g Liu,
Xin-Shuai Zhang,
Tian-Chong Zhang,
Fu-Ting Yi,
Qun Ou-Yang,
Yuan-Bo Chen
Abstract:
In this paper, the effect of humidity and dust trapped in avalanche region on leakage current of bulk micro-MEGAS detector is studied. Pyralux PC1025 layers of DuPont are introduced in bulk technique and micro-MEGAS detector with pillars of 300μm in diameter is fabricated. Leakage current is tested in air with different humidity. Silicon carbide powder and PMMA (polymethyl methacrylate) powder are…
▽ More
In this paper, the effect of humidity and dust trapped in avalanche region on leakage current of bulk micro-MEGAS detector is studied. Pyralux PC1025 layers of DuPont are introduced in bulk technique and micro-MEGAS detector with pillars of 300μm in diameter is fabricated. Leakage current is tested in air with different humidity. Silicon carbide powder and PMMA (polymethyl methacrylate) powder are added as dust to avalanche region. Leakage current with and without powder is tested in air and results are depicted in the same figure. Test results indicate that leakage current increases with both storage humidity and test humidity, and also increases when powder is introduced in avalanche region.
△ Less
Submitted 25 September, 2013;
originally announced September 2013.