-
Forward silicon tracking detector developments for the future Electron-Ion Collider
Authors:
Xuan Li,
Melynda Brooks,
Matt Durham,
Ming Liu,
Yasser Corrales Morales,
Kei Nagai,
Anton Navazo,
Christopher Prokop,
Eric Renner,
Walter Sondheim,
Cesar da Silva
Abstract:
The future Electron-Ion Collider (EIC) will utilize a series of high-luminosity high-energy electron+proton ($e+p$) and electron+nucleus ($e+A$) collisions to explore the inner structure of nucleon and nucleus and the matter formation process. Heavy flavor hadron and jet measurements at the EIC will play an essential role in determining the nucleon/nucleus parton distribution function and heavy qu…
▽ More
The future Electron-Ion Collider (EIC) will utilize a series of high-luminosity high-energy electron+proton ($e+p$) and electron+nucleus ($e+A$) collisions to explore the inner structure of nucleon and nucleus and the matter formation process. Heavy flavor hadron and jet measurements at the EIC will play an essential role in determining the nucleon/nucleus parton distribution function and heavy quark hadronization process in not well constrained kinematic regions. A high granularity and low material budget forward silicon tracker will enable precise forward heavy flavor measurements at the EIC, which have enhanced sensitivities to access these kinematic extremes. A Forward Silicon Tracker (FST) detector is under design and R$\&$D for the EIC. Two advanced silicon technologies, the Depleted Monolithic Active Pixel Sensor (DMAPS) and the AC coupled Low Gain Avalanche Diode (AC-LGAD), which can provide fine spatial and timing resolutions, have been considered as candidates for the EIC silicon tracking detector. Progresses and results about the FST conceptual design and ongoing DMAPS and LGAD detector R$\&$D will be presented. The path towards an integrated EIC detector will be discussed as well.
△ Less
Submitted 14 October, 2022; v1 submitted 10 October, 2022;
originally announced October 2022.
-
Forward silicon vertex/tracking detector design and R$\&$D for the future Electron-Ion Collider
Authors:
Xuan Li,
Melynda Brooks,
Matt Durham,
Yasser Corrales Morales,
Astrid Morreale,
Christopher Prokop,
Eric Renner,
Walter Sondheim
Abstract:
The proposed high-luminosity high-energy Electron-Ion Collider (EIC) will provide a clean environment to precisely study several fundamental questions in the fields of high-energy and nuclear physics . A low material budget and high granularity silicon vertex/tracking detector is critical to carry out a series of hadron and jet measurements at the future EIC especially for the heavy flavor product…
▽ More
The proposed high-luminosity high-energy Electron-Ion Collider (EIC) will provide a clean environment to precisely study several fundamental questions in the fields of high-energy and nuclear physics . A low material budget and high granularity silicon vertex/tracking detector is critical to carry out a series of hadron and jet measurements at the future EIC especially for the heavy flavor product reconstruction or tagging. The conceptual design of a proposed forward silicon tracking detector with the pseudorapidity coverage from 1.2 to 3.5 has been developed in integration with different magnet options and the other EIC detector sub-systems. The tracking performance of this detector enables precise heavy flavor hadron and jet measurements in the hadron beam going direction. The detector R$\&$D for the proposed silicon technology candidates: Low Gain Avalanche Diode (LGAD) and radiation hard depleted Monolithic Active Pixel Sensor (MALTA), which can provide good spatial and timing resolutions, is underway. Bench test results of the LGAD and MALTA prototype sensors will be discussed.
△ Less
Submitted 4 November, 2021;
originally announced November 2021.
-
Measurement of material isotopics and atom number ratio with alpha-particle spectroscopy for the NIFFTE fission Time Projection Chamber actinide target
Authors:
M. Monterial,
K. T. Schmitt,
C. Prokop,
E. Leal-Cidoncha,
M. Anastasiou,
N. S. Bowden,
J. Bundgaard,
R. J. Casperson,
D. A. Cebra,
T. Classen,
D. H. Dongwi,
N. Fotiades,
J. Gearhart,
V. Geppert-Kleinrath,
U. Greife,
C. Hagmann,
M. Heffner,
D. Hensle,
D. Higgins,
L. D. Isenhower,
K. Kazkaz,
A. Kemnitz,
J. King,
J. L. Klay,
J. Latta
, et al. (15 additional authors not shown)
Abstract:
We present the results of a measurement of isotopic concentrations and atomic number ratio of a double-sided actinide target with alpha-spectroscopy and mass spectrometry. The double-sided actinide target, with primarily Pu-239 on one side and U-235 on the other, was used in the fission Time Projection Chamber (fissionTPC) for a measurement of the neutron-induced fission cross-section ratio betwee…
▽ More
We present the results of a measurement of isotopic concentrations and atomic number ratio of a double-sided actinide target with alpha-spectroscopy and mass spectrometry. The double-sided actinide target, with primarily Pu-239 on one side and U-235 on the other, was used in the fission Time Projection Chamber (fissionTPC) for a measurement of the neutron-induced fission cross-section ratio between the two isotopes. The measured atomic number ratio is intended to provide an absolute normalization of the measured fission cross-section ratio. The Pu-239/U-235 atom number ratio was measured with a combination of mass spectrometry and alpha-spectroscopy with a planar silicon detector with uncertainties of less than 1%.
△ Less
Submitted 9 July, 2021; v1 submitted 10 June, 2021;
originally announced June 2021.
-
Measurement of the neutron capture cross-section on argon
Authors:
V. Fischer,
L. Pagani,
L. Pickard,
A. Couture,
S. Gardiner,
C. Grant,
J. He,
T. Johnson,
E. Pantic,
C. Prokop,
R. Svoboda,
J. Ullmann,
J. Wang
Abstract:
The use of argon as a detection and shielding medium for neutrino and dark matter experiments has made the precise knowledge of the cross section for neutron capture on argon an important design and operational parameter. Since previous measurements were averaged over thermal spectra and have significant disagreements, a differential measurement has been performed using a Time-Of-Flight neutron be…
▽ More
The use of argon as a detection and shielding medium for neutrino and dark matter experiments has made the precise knowledge of the cross section for neutron capture on argon an important design and operational parameter. Since previous measurements were averaged over thermal spectra and have significant disagreements, a differential measurement has been performed using a Time-Of-Flight neutron beam and a $\sim$4$π$ gamma spectrometer. A fit to the differential cross section from $0.015-0.15$\,eV, assuming a $1/v$ energy dependence, yields $σ^{2200} = 673 \pm 26 \text{ (stat.)} \pm 59 \text{ (sys.)}$\,mb.
△ Less
Submitted 5 July, 2019; v1 submitted 1 February, 2019;
originally announced February 2019.
-
Digital Data Acquisition For the Low Energy Neutron Detector Array (LENDA)
Authors:
S. Lipschutz,
R. G. T. Zegers,
J. Hill,
S. N. Liddick,
S. Noji,
C. J. Prokop,
M. Scott,
M. Solt,
C. Sullivan,
J. Tompkins
Abstract:
A digital data acquisition system (DDAS) has been implemented for the Low Energy Neutron Detector Array (LENDA). LENDA is an array of 24 BC-408 plastic-scintillator bars designed to measure low-energy neutrons with kinetic energies in the range of 100 keV to 10 MeV from (p,n)-type charge-exchange reactions. Compared to the previous data acquisition (DAQ) system for LENDA, DDAS offers the possibili…
▽ More
A digital data acquisition system (DDAS) has been implemented for the Low Energy Neutron Detector Array (LENDA). LENDA is an array of 24 BC-408 plastic-scintillator bars designed to measure low-energy neutrons with kinetic energies in the range of 100 keV to 10 MeV from (p,n)-type charge-exchange reactions. Compared to the previous data acquisition (DAQ) system for LENDA, DDAS offers the possibility to lower the neutron detection threshold, increase the overall neutron-detection efficiency, decrease the dead time of the system, and allow for easy expansion of the array. The system utilized in this work was XIA's Digital Gamma Finder Pixie-16 250 MHz digitizers. A detector-limited timing resolution of 400 ps was achieved for a single LENDA bar. Using DDAS, the neutron detection threshold of the system was reduced compared to the previous analog system, now reaching below 100 keV. The new DAQ system was successfully used in a recent charge-exchange experiment using the $^{16}$C(p,n) reaction at the National Superconducting Cyclotron Laboratory (NSCL).
△ Less
Submitted 19 January, 2016; v1 submitted 18 January, 2016;
originally announced January 2016.
-
Formation of Compressed Flat Electron Beams with High Transverse-Emittance Ratios
Authors:
J. Zhu,
P. Piot,
D. Mihalcea,
C. R. Prokop
Abstract:
Flat beams -- beams with asymmetric transverse emittances -- have important applications in novel light-source concepts, advanced-acceleration schemes and could possibly alleviate the need for dam** rings in lepton colliders. Over the last decade, a flat-beam-generation technique based on the conversion of an angular-momentum-dominated beam was proposed and experimentally tested. In this paper w…
▽ More
Flat beams -- beams with asymmetric transverse emittances -- have important applications in novel light-source concepts, advanced-acceleration schemes and could possibly alleviate the need for dam** rings in lepton colliders. Over the last decade, a flat-beam-generation technique based on the conversion of an angular-momentum-dominated beam was proposed and experimentally tested. In this paper we explore the production of compressed flat beams. We especially investigate and optimize the flat-beam transformation for beams with substantial fractional energy spread. We use as a simulation example the photoinjector of the Fermilab's Advanced Superconducting Test Accelerator (ASTA). The optimizations of the flat beam generation and compression at ASTA were done via start-to-end numerical simulations for bunch charges of 3.2 nC, 1.0 nC and 20 pC at ~37 MeV. The optimized emittances of flat beams with different bunch charges were found to be 0.25 μm (emittance ratio is ~400), 0.13 μm, 15 nm before compression, and 0.41 μm, 0.20 μm, 16 nm after full compression, respectively with peak currents as high as 5.5 kA for a 3.2-nC flat beam. These parameters are consistent with requirements needed to excite wakefields in asymmetric dielectric-lined waveguides or produce significant photon flux using small-gap micro-undulators.
△ Less
Submitted 5 September, 2014;
originally announced September 2014.
-
Beam dynamics performances and applications of a low-energy electron-beam magnetic bunch compressor
Authors:
C. R. Prokop,
P. Piot,
B. E. Carlsten,
M. Church
Abstract:
Many front-end applications of electron linear accelerators rely on the production of temporally-compressed bunches. The shortening of electron bunches is often realized with magnetic bunch compressors located in high-energy sections of accelerators. Magnetic compression is subject to collective effects including space charge and self interaction via coherent synchrotron radiation. In this paper w…
▽ More
Many front-end applications of electron linear accelerators rely on the production of temporally-compressed bunches. The shortening of electron bunches is often realized with magnetic bunch compressors located in high-energy sections of accelerators. Magnetic compression is subject to collective effects including space charge and self interaction via coherent synchrotron radiation. In this paper we explore the application of magnetic compression to low-energy ($\sim 40$ MeV), high-charge (nC) electron bunches with low normalized transverse emittances ($< 5$ $μ$m).
△ Less
Submitted 4 February, 2013;
originally announced February 2013.
-
Experiment and simulations of sub-ps electron bunch train generation at Fermilab photoinjectors
Authors:
Y. -E Sun,
M. Church,
P. Piot,
C. R. Prokop
Abstract:
Recently the generation of electron bunch trains with sub-picosecond time structure has been experimentally demonstrated at the A0 photoinjector of Fermilab using a transverse-longitudinal phase-space exchange beamline. The temporal profile of the bunch train can be easily tuned to meet the requirements of the applications of modern accelerator beams. In this paper we report the A0 bunch-train exp…
▽ More
Recently the generation of electron bunch trains with sub-picosecond time structure has been experimentally demonstrated at the A0 photoinjector of Fermilab using a transverse-longitudinal phase-space exchange beamline. The temporal profile of the bunch train can be easily tuned to meet the requirements of the applications of modern accelerator beams. In this paper we report the A0 bunch-train experiment and explore numerically the possible extension of this technique to shorter time scales at the Fermilab SRF Accelerator Test Facility, a superconducting linear electron accelerator currently under construction in the NML building.
△ Less
Submitted 27 January, 2012;
originally announced January 2012.
-
Numerical modeling of a table-top tunable Smith-Purcell Terahertz free-electron laser operating in the super-radiant regime
Authors:
C. Prokop,
P. Piot,
M. -C. Lin,
P. Stoltz
Abstract:
Terahertz (THz) radiation occupies a very large portion of the electromagnetic spectrum and has generated much recent interest due to its ability to penetrate deep into many organic materials without the damage associated with ionizing radiation such as x-rays. One path for generating copious amount of tunable narrow-band THz radiation is based on the Smith-Purcell free-electron laser (SPFEL) effe…
▽ More
Terahertz (THz) radiation occupies a very large portion of the electromagnetic spectrum and has generated much recent interest due to its ability to penetrate deep into many organic materials without the damage associated with ionizing radiation such as x-rays. One path for generating copious amount of tunable narrow-band THz radiation is based on the Smith-Purcell free-electron laser (SPFEL) effect. In this Letter we propose a simple concept for a compact two-stage tunable SPFEL operating in the superradiant regime capable of radiating at the grating's fundamental bunching frequency. We demonstrate its capabilities and performances via computer simulation using the conformal finite-difference time-domain electromagnetic solver {\sc vorpal}.
△ Less
Submitted 10 April, 2010;
originally announced April 2010.
