-
Map** reaction mechanism during overcharge of a LiNiO2/Graphite-silicon lithium-ion battery: a correlative operando approach by simultaneous gas analysis and synchrotron scattering techniques
Authors:
Quentin Jacquet,
Irina Profatilova,
Loic Baggetto,
Bouthayna Alrifai,
Elisabeth Addes,
Paul Chassagne,
Nils Blanc,
Samuel Tardif,
Lise Daniel,
Sandrine Lyonnard
Abstract:
Li-ion battery degradation processes are multi-scale, heterogeneous, dynamic and involve multiple cell components through cross talk mechanisms. Correlated operando characterization capable of measuring several key parameters are needed to accelerate understanding on these complex degradation processes. In particular, degradation mechanisms during overcharge of LiNiO2/Graphite-Silicon is well know…
▽ More
Li-ion battery degradation processes are multi-scale, heterogeneous, dynamic and involve multiple cell components through cross talk mechanisms. Correlated operando characterization capable of measuring several key parameters are needed to accelerate understanding on these complex degradation processes. In particular, degradation mechanisms during overcharge of LiNiO2/Graphite-Silicon is well known at the material level featuring O2 gas release and concomitant surface reconstruction of LiNiO2. However, there are still debates regarding the role of high voltage O1 phase formation on gas production and no information on the effect of produced gases on the cell components (anode or sensors), or effect of overcharge on electrode level behavior. In this work, we simultaneously measured the gas produced using operando mass spectrometry while spatially resolving nanostructure and lattice changes using operando micro SAXS/WAXS map** during the formation and over charge of a LiNiO2/Gr-Si pouch cell. This new correlated operando characterization experiment allowed to (1) confirm the absence of O1 phase even with substantial gas produced at end of charge, (2) unveil the effect of gases on reference and negative electrodes, (3) show that overcharge increases in-plane reaction heterogeneities by creating local degraded spots lagging behind the ensemble electrochemistry. These findings will be important to optimize ageing of devices based on similar chemistries, in particular Ni-rich NMC, while showing the strength of correlated characterization leading to more efficient and robust information on complex mechanisms.
△ Less
Submitted 8 May, 2024;
originally announced May 2024.
-
Surface and sub-surface modifications of copper electrodes exposed to high-field conditioning at cryogenic temperatures
Authors:
Marek Jacewicz,
Iaroslava Profatilova,
Piotr Szaniawski,
Inna Popov,
Yinon Ashkenazy,
Sergio Calatroni,
Walter Wuensch
Abstract:
In order to investigate the dependence of conditioning and field-holding on temperature, three pairs of copper electrodes underwent high voltage conditioning with direct current (DC) pulses while kept at a single temperature, unique for each set (300~K, 30~K and 10~K), until saturation field for each set was found. The sets conditioned at cold showed a significant increase in the field holding cap…
▽ More
In order to investigate the dependence of conditioning and field-holding on temperature, three pairs of copper electrodes underwent high voltage conditioning with direct current (DC) pulses while kept at a single temperature, unique for each set (300~K, 30~K and 10~K), until saturation field for each set was found. The sets conditioned at cold showed a significant increase in the field holding capability, reaching fields up to 147 MV/m after tens of millions of pulses and very few breakdowns (BDs). We interpret this as an indication of the conditioning effect being due to high field pulsing rather than exposure to BDs. The effect of the warm and cold conditioning was investigated with high-resolution microscopy, characterizing the BD spots on the anode and cathode according to their morphology and with scanning transmission electron microscopy (STEM) analyzing the changes in the sub-surface regions. Atypical BD spot features were found on the cryogenically conditioned cathode surfaces, with very shallow craters of a star-like shape. The number of atypical spots increased with decreased temperatures, reaching 26 and 53 percent of the total number of spots at 30~K and 10~K, respectively. A hypothesis explaining the formation of these features is also presented. The very different morphology of the anode and cathode BD spots is presented in detail that suggesting an unknown shielding mechanism that prevents the center of the anode spot from melting. These results provide important experimental input for the development of quantitative theories and models for BD initiation and inter-electrode plasma formation.
△ Less
Submitted 5 March, 2024;
originally announced March 2024.
-
Completion of Testing Series Double-spoke Cavity Cryomodules for ESS
Authors:
R. Santiago Kern,
C. Svanberg,
K. Fransson,
K. Gajewski,
L. Hermansson,
H. Li,
T. Lofnes,
M. Olvegård,
I. Profatilova,
M. Zhovner,
A. Miyazaki,
R. Ruber
Abstract:
The FREIA Laboratory at Uppsala University, Sweden, has completed the evaluation of 13 double-spoke cavity cryomodules for ESS. This is the first time double-spoke cavities will be deployed in a real machine. This paper summarizes testing procedures and statistics of the results and lessons learned.
The FREIA Laboratory at Uppsala University, Sweden, has completed the evaluation of 13 double-spoke cavity cryomodules for ESS. This is the first time double-spoke cavities will be deployed in a real machine. This paper summarizes testing procedures and statistics of the results and lessons learned.
△ Less
Submitted 20 June, 2023;
originally announced June 2023.
-
Effect of dc voltage pulsing on high-vacuum electrical breakdowns near Cu surfaces
Authors:
Anton Saressalo,
Iaroslava Profatilova,
William L. Millar,
Andreas Kyritsakis,
Sergio Calatroni,
Walter Wuensch,
Flyura Djurabekova
Abstract:
Vacuum electrical breakdowns, also known as vacuum arcs, are a limiting factor in many devices that are based on application of high electric fields near their component surfaces. Understanding of processes that lead to breakdown events may help mitigating their appearance and suggest ways for improving operational efficiency of power-consuming devices. Stability of surface performance at a given…
▽ More
Vacuum electrical breakdowns, also known as vacuum arcs, are a limiting factor in many devices that are based on application of high electric fields near their component surfaces. Understanding of processes that lead to breakdown events may help mitigating their appearance and suggest ways for improving operational efficiency of power-consuming devices. Stability of surface performance at a given value of the electric field is affected by the conditioning state, i.e. how long the surface was exposed to this field. Hence, optimization of the surface conditioning procedure can significantly speed up the preparatory steps for high-voltage applications. In this article, we use pulsed dc systems to optimize the surface conditioning procedure of copper electrodes, focusing on the effects of voltage recovery after breakdowns, variable repetition rates as well as long waiting times between pulsing runs. Despite the differences in the experimental scales, ranging from $10^{-4}$ s between pulses, up to pulsing breaks of $10^5$ s, the experiments show that the longer the idle time between the pulses, the more probable it is that the next pulse produces a breakdown. We also notice that secondary breakdowns, i.e. those which correlate with the previous ones, take place mainly during the voltage recovery stage. We link these events with deposition of residual atoms from vacuum on the electrode surfaces. Minimizing the number of pauses during the voltage recovery stage reduces power losses due to secondary breakdown events improving efficiency of the surface conditioning.
△ Less
Submitted 10 November, 2020; v1 submitted 5 August, 2020;
originally announced August 2020.
-
Classification of vacuum arc breakdowns in a pulsed DC system
Authors:
Anton Saressalo,
Iaroslava Profatilova,
Andreas Kyritsakis,
Jan Paszkiewicz,
Sergio Calatroni,
Walter Wuensch,
Flyura Djurabekova
Abstract:
Understanding the microscopic phenomena behind vacuum arc ignition and generation is crucial for being able to control the breakdown rate, thus improving the effectiveness of many high-voltage applications where frequent breakdowns limit the operation. In this work, statistical properties of various aspects of breakdown, such as the number of pulses between breakdowns, breakdown locations and crat…
▽ More
Understanding the microscopic phenomena behind vacuum arc ignition and generation is crucial for being able to control the breakdown rate, thus improving the effectiveness of many high-voltage applications where frequent breakdowns limit the operation. In this work, statistical properties of various aspects of breakdown, such as the number of pulses between breakdowns, breakdown locations and crater sizes are studied independently with almost identical Pulsed DC Systems at the University of Helsinki and in CERN. In high-gradient experiments, copper electrodes with parallel plate capacitor geometry, undergo thousands of breakdowns. The results support the classification of the events into primary and secondary breakdowns, based on the distance and number of pulses between two breakdowns. Primary events follow a power law on the log--log scale with the slope $α\approx 1.33$, while the secondaries are highly dependent on the pulsing parameters.
△ Less
Submitted 23 January, 2020; v1 submitted 11 November, 2019;
originally announced November 2019.
-
DC vacuum breakdown in an external magnetic field
Authors:
S. Lebedynskyi,
O. Karpenko,
R. Kholodov,
V. Baturin,
Ia. Profatilova,
N. Shipman,
W. Wuensch
Abstract:
The subject of the present theoretical and experimental investigations is the effect of the external magnetic field induction on dark current and a possibility of breakdown. The generalization of the Fowler-Nordheim equation makes it possible to take into account the influence of a magnetic field parallel to the cathode surface on the field emission current. The reduction in the breakdown voltage…
▽ More
The subject of the present theoretical and experimental investigations is the effect of the external magnetic field induction on dark current and a possibility of breakdown. The generalization of the Fowler-Nordheim equation makes it possible to take into account the influence of a magnetic field parallel to the cathode surface on the field emission current. The reduction in the breakdown voltage due to the increment in electron-impact ionization was theoretical predicted. Experimentally shown that the presence of a magnetic field about a tenth as a large as the cutoff magnetic field [18] reduces the breakdown voltage by 10% to 20% for practically all cathodes no matter what their surface treatment.
△ Less
Submitted 30 September, 2019;
originally announced October 2019.
-
Vacuum electrical breakdown conditioning study in a parallel plate electrode pulsed DC system
Authors:
Anders Korsbäck,
Laura Mercadé Morales,
Iaroslava Profatilova,
Flyura Djurabekova,
Enrique Rodriguez Castro,
Walter Wuensch,
Tommy Ahlgren,
Sergio Calatroni
Abstract:
Conditioning of a metal structure in a high-voltage system is the progressive development of resistance to vacuum arcing over the operational life of the system. This is, for instance, seen during the initial operation of radio frequency (rf) cavities in particle accelerators. It is a relevant topic for any technology where breakdown limits performance, and where conditioning continues for a signi…
▽ More
Conditioning of a metal structure in a high-voltage system is the progressive development of resistance to vacuum arcing over the operational life of the system. This is, for instance, seen during the initial operation of radio frequency (rf) cavities in particle accelerators. It is a relevant topic for any technology where breakdown limits performance, and where conditioning continues for a significant duration of system runtime. Projected future linear accelerators require structures with accelerating gradients of up to 100 MV/m. Currently, this performance level is only achievable after a multi-month conditioning period. In this work, a pulsed DC system applying voltage pulses over parallel disk electrodes was used to study the conditioning process, with the objective of obtaining insight into its underlying mechanics, and ultimately, to find ways to shorten the conditioning process. Two kinds of copper electrodes were tested: As-prepared machine-turned electrodes ("hard" copper), and electrodes that additionally had been subjected to high temperature treatments ("soft" copper). The conditioning behaviour of the soft electrodes was found to be similar to that of comparably treated accelerating structures, indicating a similar conditioning process. The hard electrodes reached the same ultimate performance as the soft electrodes much faster, with a difference of more than an order of magnitude in the number of applied voltage pulses. Two distinctly different distributions of breakdown locations were observed on the two types of electrodes. Considered together, our results support the crystal structure dislocation theory of breakdown, and suggest that the conditioning of copper in high field systems such as rf accelerating structures is dominated by material hardening.
△ Less
Submitted 10 May, 2019;
originally announced May 2019.
-
The Compact Linear Collider (CLIC) - 2018 Summary Report
Authors:
The CLIC,
CLICdp collaborations,
:,
T. K. Charles,
P. J. Giansiracusa,
T. G. Lucas,
R. P. Rassool,
M. Volpi,
C. Balazs,
K. Afanaciev,
V. Makarenko,
A. Patapenka,
I. Zhuk,
C. Collette,
M. J. Boland,
A. C. Abusleme Hoffman,
M. A. Diaz,
F. Garay,
Y. Chi,
X. He,
G. Pei,
S. Pei,
G. Shu,
X. Wang,
J. Zhang
, et al. (671 additional authors not shown)
Abstract:
The Compact Linear Collider (CLIC) is a TeV-scale high-luminosity linear $e^+e^-$ collider under development at CERN. Following the CLIC conceptual design published in 2012, this report provides an overview of the CLIC project, its current status, and future developments. It presents the CLIC physics potential and reports on design, technology, and implementation aspects of the accelerator and the…
▽ More
The Compact Linear Collider (CLIC) is a TeV-scale high-luminosity linear $e^+e^-$ collider under development at CERN. Following the CLIC conceptual design published in 2012, this report provides an overview of the CLIC project, its current status, and future developments. It presents the CLIC physics potential and reports on design, technology, and implementation aspects of the accelerator and the detector. CLIC is foreseen to be built and operated in stages, at centre-of-mass energies of 380 GeV, 1.5 TeV and 3 TeV, respectively. CLIC uses a two-beam acceleration scheme, in which 12 GHz accelerating structures are powered via a high-current drive beam. For the first stage, an alternative with X-band klystron powering is also considered. CLIC accelerator optimisation, technical developments and system tests have resulted in an increased energy efficiency (power around 170 MW) for the 380 GeV stage, together with a reduced cost estimate at the level of 6 billion CHF. The detector concept has been refined using improved software tools. Significant progress has been made on detector technology developments for the tracking and calorimetry systems. A wide range of CLIC physics studies has been conducted, both through full detector simulations and parametric studies, together providing a broad overview of the CLIC physics potential. Each of the three energy stages adds cornerstones of the full CLIC physics programme, such as Higgs width and couplings, top-quark properties, Higgs self-coupling, direct searches, and many precision electroweak measurements. The interpretation of the combined results gives crucial and accurate insight into new physics, largely complementary to LHC and HL-LHC. The construction of the first CLIC energy stage could start by 2026. First beams would be available by 2035, marking the beginning of a broad CLIC physics programme spanning 25-30 years.
△ Less
Submitted 6 May, 2019; v1 submitted 14 December, 2018;
originally announced December 2018.
-
Updated baseline for a staged Compact Linear Collider
Authors:
The CLIC,
CLICdp collaborations,
:,
M. J. Boland,
U. Felzmann,
P. J. Giansiracusa,
T. G. Lucas,
R. P. Rassool,
C. Balazs,
T. K. Charles,
K. Afanaciev,
I. Emeliantchik,
A. Ignatenko,
V. Makarenko,
N. Shumeiko,
A. Patapenka,
I. Zhuk,
A. C. Abusleme Hoffman,
M. A. Diaz Gutierrez,
M. Vogel Gonzalez,
Y. Chi,
X. He,
G. Pei,
S. Pei,
G. Shu
, et al. (493 additional authors not shown)
Abstract:
The Compact Linear Collider (CLIC) is a multi-TeV high-luminosity linear e+e- collider under development. For an optimal exploitation of its physics potential, CLIC is foreseen to be built and operated in a staged approach with three centre-of-mass energy stages ranging from a few hundred GeV up to 3 TeV. The first stage will focus on precision Standard Model physics, in particular Higgs and top-q…
▽ More
The Compact Linear Collider (CLIC) is a multi-TeV high-luminosity linear e+e- collider under development. For an optimal exploitation of its physics potential, CLIC is foreseen to be built and operated in a staged approach with three centre-of-mass energy stages ranging from a few hundred GeV up to 3 TeV. The first stage will focus on precision Standard Model physics, in particular Higgs and top-quark measurements. Subsequent stages will focus on measurements of rare Higgs processes, as well as searches for new physics processes and precision measurements of new states, e.g. states previously discovered at LHC or at CLIC itself. In the 2012 CLIC Conceptual Design Report, a fully optimised 3 TeV collider was presented, while the proposed lower energy stages were not studied to the same level of detail. This report presents an updated baseline staging scenario for CLIC. The scenario is the result of a comprehensive study addressing the performance, cost and power of the CLIC accelerator complex as a function of centre-of-mass energy and it targets optimal physics output based on the current physics landscape. The optimised staging scenario foresees three main centre-of-mass energy stages at 380 GeV, 1.5 TeV and 3 TeV for a full CLIC programme spanning 22 years. For the first stage, an alternative to the CLIC drive beam scheme is presented in which the main linac power is produced using X-band klystrons.
△ Less
Submitted 27 March, 2017; v1 submitted 26 August, 2016;
originally announced August 2016.