-
An integrated experimental and computational framework for modeling creep behavior in shale rocks induced by chemo-mechanical loading
Authors:
Ravi Prakash,
Sara Abedi
Abstract:
Creep deformation in shale rocks is an important factor in many applications, such as the sustainability of geostructures, wellbore stability, evaluation of land subsidence, CO2 storage, toxic waste containment, and hydraulic fracturing. One mechanism leading to this time-dependent deformation under a constant load is the dissolution/formation processes accompanied by chemo-mechanical interactions…
▽ More
Creep deformation in shale rocks is an important factor in many applications, such as the sustainability of geostructures, wellbore stability, evaluation of land subsidence, CO2 storage, toxic waste containment, and hydraulic fracturing. One mechanism leading to this time-dependent deformation under a constant load is the dissolution/formation processes accompanied by chemo-mechanical interactions with a reactive environment. When dissolution/formation processes occur within the material phases, the distribution of stress and strain within the material microstructure changes. In the case of the dissolution process, the stress carried by the dissolving phase is distributed into neighboring voxels, which leads to further deformation of the material. The aim of this study was to explore the relationship between the microstructural evolution and time-dependent creep behavior of rocks subjected to chemo-mechanical loading. This work uses the experimentally characterized microstructural and mechanical evolution of a shale rock induced by interactions with a reactive brine (CO2-rich brine) and a non-reactive brine (N2-rich brine) under high-pressure and high-temperature conditions to compute the resulting time-dependent deformation using a time-step** finite-element-based modeling approach. Sample microstructure snapshots were obtained using segmented micro-CT images of the rock samples before and after the reactions. Coupled nanoindentation/EDS provided spatial alteration of the mechanical properties of individual material phases due to the dissolution and precipitation processes as a result of the chemo-mechanical loading of the samples. The time-dependent mechanically informed microstructures were then incorporated into a mechanical model to calculate the creep behavior caused by the dissolution/precipitation processes independent of the inherent viscous properties of the mineral phases.
△ Less
Submitted 16 May, 2023;
originally announced May 2023.
-
An Experimental Investigation of Cavitation Bulk Nanobubbles Characteristics: Effects of pH and Surface-active Agents
Authors:
Ritesh Prakash,
**seok Lee,
Youngkwang Moon,
Diva Pradhan,
Seunghyun Kim,
Ho-Yong Lee,
**kee Lee
Abstract:
Understanding the behavior of nanobubbles (NBs) in various aqueous solutions is a challenging task. The present work investigates the effects of various surfactants (i.e., anionic, cationic, and nonionic) and pH medium on bulk NBs formation, size, concentration, bubble size distribution (BSD), zeta potential, and stability. The effect of surfactant was investigated at various concentrations above…
▽ More
Understanding the behavior of nanobubbles (NBs) in various aqueous solutions is a challenging task. The present work investigates the effects of various surfactants (i.e., anionic, cationic, and nonionic) and pH medium on bulk NBs formation, size, concentration, bubble size distribution (BSD), zeta potential, and stability. The effect of surfactant was investigated at various concentrations above and below critical micelle concentrations. NBs were created in DI water using a piezoelectric transducer. The stability of NBs was assessed by tracking the change in size and concentration over time. NBs size is small in the neutral medium compared to the other surfactant or pH mediums. The size, concentration, BSD, and stability of NBs are strongly influenced by the zeta potential rather than the solution medium. BSD curve shifts to lower bubble sizes when the magnitude of zeta potential is high in any solution. NBs were observed to exist for a long time, either in pure water, surfactant, or pH solutions. The longevity of NBs is shortened in environments with pH less than 3. Surfactant adsorption on the NBs surface increases with surfactant concentration up to a certain limit, beyond which it declines considerably. The Derjaguin-LandauVerwey-Overbeek (DLVO) theory was used to interpret the NBs stability, which resulted in a total potential energy barrier that is positive and greater than 43.90kBT for pH ranging from 6.0 to 11.0, whereas, for pH below 6, the potential energy barrier essentially vanishes. Moreover, an effort has also been made to elucidate the plausible prospect of ion distribution and its alignment surrounding NBs in cationic and anionic surfactants. The present research will extend the in-depth investigation of NBs for industrial applications involving NBs.
△ Less
Submitted 21 January, 2023;
originally announced January 2023.
-
High success standard quantum teleportation using entangled coherent state and two-level atoms in cavities
Authors:
Ravi Kamal Pandey,
Ranjana Prakash,
Hari Prakash
Abstract:
We propose here a new idea for quantum teleportation of superposed coherent state which is not only almost perfect, in principle, but also feasible experimentally. We use entangled resource $\sim |α,\fracα{\sqrt{2}}\rangle-|-α,-\fracα{\sqrt{2}}\rangle$ in contrast with the usual $\sim |α,α\rangle-|-α,-α\rangle$ (both states unnormalized). Bob receives state which is then superposition of the state…
▽ More
We propose here a new idea for quantum teleportation of superposed coherent state which is not only almost perfect, in principle, but also feasible experimentally. We use entangled resource $\sim |α,\fracα{\sqrt{2}}\rangle-|-α,-\fracα{\sqrt{2}}\rangle$ in contrast with the usual $\sim |α,α\rangle-|-α,-α\rangle$ (both states unnormalized). Bob receives state which is then superposition of the states $|\pm \fracα{\sqrt{2}}\rangle$ . Bob mixes these with even or odd coherent states involving superposition of states $|\pm \fracα{\sqrt{2}}\rangle$ to obtain a two-mode state which is one of $\sim |I,0\rangle \pm |0,I\rangle$, $|I\rangle$ being the information state. Bob then obtains the teleported information by using interaction of one of these modes in two cavities with resonant two-level atoms. This scheme results in average fidelity of $\simeq 0.95$ for $|α|^2 \simeq 10$, which increases with $|α|^2$ and tends to 1 asymptotically, varying as $1-\frac{π^2}{16|α|^2}+\frac{π^2(π^2+8)}{256|α|^4}$ for large values of $|α|^2$.
△ Less
Submitted 14 October, 2020;
originally announced October 2020.
-
Detailed numerical simulations of atomization of a liquid jet in a swirling gas crossflow
Authors:
Surya R Prakash,
Suhas S Jain,
Jeffery A. Lovett,
B N Raghunandan,
R V Ravikrishna,
Gaurav Tomar
Abstract:
Breakup of a liquid jet in a high speed gaseous crossflow finds wide range of engineering and technological applications, especially in the combustors of the gas turbine engines in aerospace industry. In this study, we present volume-of-fluid method based direct numerical simulations of a liquid jet injected into a swirling crossflow of gas. The liquid is injected radially outwards from a central…
▽ More
Breakup of a liquid jet in a high speed gaseous crossflow finds wide range of engineering and technological applications, especially in the combustors of the gas turbine engines in aerospace industry. In this study, we present volume-of-fluid method based direct numerical simulations of a liquid jet injected into a swirling crossflow of gas. The liquid is injected radially outwards from a central tube to a confined annular space with a swirling gas crossflow. The essential features of the jet breakup involving jet flattening, surface waves and strip** of droplets from the edges of the jet are captured in the simulations. We discuss the effect of swirl on the spray characteristics such as jet trajectory, column breakup-length, and size, shape-factor and velocity distribution of the drops. Drop size increases with swirl and penetration is slightly reduced. Moreover, the trajectory follows an angle (azimuthal) that is smaller than the geometric angle of the swirl at the inlet. Interestingly, we also observe coalescence events downstream of the jet that affect the final droplet size distribution for the geometry considered in this study.
△ Less
Submitted 2 January, 2020; v1 submitted 25 June, 2019;
originally announced June 2019.
-
Controlled Quantum Teleportation of Superposed Coherent State using GHZ Entangled Coherent State
Authors:
Ravi Kamal Pandey,
Ranjana Prakash,
Hari Prakash
Abstract:
Controlled quantum teleportation of superposed coherent states using GHZ entangled 3-mode coherent states is studied. Proposed scheme can be implemented experimentally using linear optical components such as a symmetric lossless beam splitter, two phase-shifters and two photon counters. Fidelity is found close to unity for appreciable mean number of photons in coherent states and is 0.99 for mean…
▽ More
Controlled quantum teleportation of superposed coherent states using GHZ entangled 3-mode coherent states is studied. Proposed scheme can be implemented experimentally using linear optical components such as a symmetric lossless beam splitter, two phase-shifters and two photon counters. Fidelity is found close to unity for appreciable mean number of photons in coherent states and is 0.99 for mean photon number equal to two.
△ Less
Submitted 26 April, 2019;
originally announced April 2019.
-
High Power, Continuous-wave Supercontinuum Generation in Highly Nonlinear Fibers Pumped with High Order, Cascaded Raman Fiber Amplifiers
Authors:
Vishal Choudhury,
S Arun,
Roopa Prakash,
V R Supradeepa
Abstract:
A novel method for efficient generation of high power, equalized continuous-wave supercontinuum source in an all conventional silica fiber architecture is demonstrated. Highly nonlinear fiber (HNLF) is pumped in its anomalous dispersion region using a novel, high power, L-band laser. The L-band laser encompasses a 6th order cascaded Raman amplifier which is pumped with a high power Ytterbium doped…
▽ More
A novel method for efficient generation of high power, equalized continuous-wave supercontinuum source in an all conventional silica fiber architecture is demonstrated. Highly nonlinear fiber (HNLF) is pumped in its anomalous dispersion region using a novel, high power, L-band laser. The L-band laser encompasses a 6th order cascaded Raman amplifier which is pumped with a high power Ytterbium doped fiber laser and amplifies a low-power, tunable L-band seed source. The supercontinuum generated 35W of power with ~40% efficiency. The Supercontinuum spectrum was measured to have a high degree of flatness of better than 5 dB over 400 nm of bandwidth (1.3 - 1.7 micron, limited by spectrum analyzer range) and a power spectral density in this region of >50 mW/nm. The extent of the SC spectrum is estimated to be upto 2 micron
△ Less
Submitted 29 June, 2018;
originally announced July 2018.
-
High Power, Tunable, Continuous-Wave Fiber Lasers in the L-band using Cascaded Raman Amplifiers
Authors:
S Arun,
Vishal Choudhury,
Roopa Prakash,
V R Supradeepa
Abstract:
We demonstrate a high power, all-fiber, tunable laser source that can operate in the L-band region. A low power, tunable input laser is amplified with a recently proposed, high efficiency, 6th order cascaded Raman amplifier. The proposed system is scalable and overcomes the limitations of Erbium and Erbium-Ytterbium co-doped fiber lasers for power scaling. A tunable Erbium-Ytterbium co-doped fiber…
▽ More
We demonstrate a high power, all-fiber, tunable laser source that can operate in the L-band region. A low power, tunable input laser is amplified with a recently proposed, high efficiency, 6th order cascaded Raman amplifier. The proposed system is scalable and overcomes the limitations of Erbium and Erbium-Ytterbium co-doped fiber lasers for power scaling. A tunable Erbium-Ytterbium co-doped fiber ring laser generating ~0.5W of power and tunable in the 1560-1590 nm wavelength range is utilized as the seed source. The output from the seed laser is amplified to ~24 W using 6th order cascaded Raman amplification. A high power Yb laser operating at 1117nm is used as the pump laser for driving the Raman conversions. The operating wavelength of the demonstrated laser in the eye-safe, atmospherically transparent region enables high power free-space applications. In addition, this source enables other interesting applications such as high power supercontinuum generation with conventional silica fibers.
△ Less
Submitted 29 June, 2018;
originally announced July 2018.
-
Secondary breakup of drops at moderate Weber numbers: Effect of Density ratio and Reynolds number
Authors:
Suhas S Jain,
Neha Tyagi,
R. Surya Prakash,
R. V. Ravikrishna,
Gaurav Tomar
Abstract:
Breakup of liquid drops occurs in several natural and industrial settings. Fully resolved Volume of Fluid based simulations presented in this study reveal the complete flow physics and droplet dynamics that lead to the breakup of a drop in a particular mode. We have investigated the effects of density ratio and Reynolds number on the dynamics of drop deformation and subsequent breakup. A density r…
▽ More
Breakup of liquid drops occurs in several natural and industrial settings. Fully resolved Volume of Fluid based simulations presented in this study reveal the complete flow physics and droplet dynamics that lead to the breakup of a drop in a particular mode. We have investigated the effects of density ratio and Reynolds number on the dynamics of drop deformation and subsequent breakup. A density ratio-Weber number phase plot is presented that indicates the variation in the deformation of the drop at various density ratios and Weber numbers. We show that the breakup dynamics of the droplets at low density ratios is significantly different to that observed at high density ratios. We also study the temporal characteristics of the droplet deformation and motion.
△ Less
Submitted 8 March, 2018;
originally announced March 2018.
-
High Power, High Efficiency, Continuous-Wave Supercontinuum Generation using Standard Telecom Fibers
Authors:
S Arun,
Vishal Choudhury,
V Balaswamy,
Roopa Prakash,
V R Supradeepa
Abstract:
We demonstrate a simple module for octave spanning continuous-wave supercontinuum generation using standard telecom fiber. This module can accept any high power Ytterbium-doped fiber laser as input. The input light is transferred into the anomalous dispersion region of the telecom fiber through a cascade of Raman shifts. A recently proposed Raman laser architecture with distributed feedback effici…
▽ More
We demonstrate a simple module for octave spanning continuous-wave supercontinuum generation using standard telecom fiber. This module can accept any high power Ytterbium-doped fiber laser as input. The input light is transferred into the anomalous dispersion region of the telecom fiber through a cascade of Raman shifts. A recently proposed Raman laser architecture with distributed feedback efficiently performs these Raman conversions. A spectrum spanning over 1000nm(>1 octave) from 880-1900nm is demonstrated. The average power from the supercontinuum is ~34W with a high conversion efficiency of 44%. Input wavelength agility is demonstrated with similar supercontinua over a wide input wavelength range.
△ Less
Submitted 4 April, 2018; v1 submitted 12 December, 2017;
originally announced December 2017.
-
Multipacting studies of beta_g=0.61 and beta_g =0.9, 650 MHz Elliptical SRF Cavities
Authors:
Ram Prakash,
Arup Ratan Jana,
Vinit Kumar
Abstract:
Multipacting is seen as a performance limiting phenomenon for the superconducting radio frequency (SRF) cavities. Numerical simulations are essential to pre-empt the experimentally observed multipacting conditions. Readily available codes(e.g. FISHPACT, MULTIPACT,CST etc.) are widely used to simulate the phenomenon of multipacting in such cases. Most of the contemporary two dimensional (2D) codes…
▽ More
Multipacting is seen as a performance limiting phenomenon for the superconducting radio frequency (SRF) cavities. Numerical simulations are essential to pre-empt the experimentally observed multipacting conditions. Readily available codes(e.g. FISHPACT, MULTIPACT,CST etc.) are widely used to simulate the phenomenon of multipacting in such cases. Most of the contemporary two dimensional (2D) codes are unable to detect multipacting in the elliptical cavities because they use a simplistic secondary emission model, where a constant value of emission kinetic energy of secondary electrons is assumed. Some three-dimensional (3D) codes, which use a more realistic and sophisticated secondary emission model (Furman model) by following a probability distribution for the emission kinetic energy of secondary electrons, are able to correctly predict the occurance of multipacting. These 3D softwares however require large data handling and are slower than contemporary 2D codes. We have developed a 2D code for the multipacting analysis for axisymmetric structures, which is based on the Furman model. Since our code is 2D, it is faster than the 3D codes. This makes it possible to perform an accurate multipacting analysis of multipacting within a resaonalble computational time, thus achieving an accuracy as good as in the case of 3D codes, but requiring significantly less computing time. We have used our code for determining the multipacting prone range of values for Eacc in beta_g =0.61 and beta_g =0.9, 650 MHz mid-cell elliptical cavities that we have recently designed for the medium and high energy section of the proposed Indian Spallation Neutron Source (ISNS) project.
△ Less
Submitted 27 November, 2016;
originally announced November 2016.
-
Reference Physics Design for 1 GeV Injector Linac and Accumulator Ring for Indian Spallation Neutron Source
Authors:
Amalendu Sharma,
Arup Ratan Jana,
Chirag Bhai Patidar,
Mukesh Kumar Pal,
Nita Kulkarni,
Pradeep Kumar Goyal,
Prasanta Kumar Jana,
Rahul Gaur,
Ram Prakash,
Rinky Dhingra,
Urmila Singh,
Vinit Kumar
Abstract:
As a part of the ongoing XIIth plan project titled "R&D activities for high energy proton linac based spallation neutron source", the work on physics design of various subsystems of the injector linac and accumulator ring has been taken up at RRCAT, Indore. For the 1 GeV H- injector linac, physics design studies of individual systems have been completed, and the end to end beam dynamics simulation…
▽ More
As a part of the ongoing XIIth plan project titled "R&D activities for high energy proton linac based spallation neutron source", the work on physics design of various subsystems of the injector linac and accumulator ring has been taken up at RRCAT, Indore. For the 1 GeV H- injector linac, physics design studies of individual systems have been completed, and the end to end beam dynamics simulation studies have been performed to ensure that the stringent beam dynamics criteria are satisfied for the optimized lattice. Physics design studies to optimize the linear lattice of the accumulator ring have also been completed. The design studies for the beam transport lines from the injector linac to the accumulator ring, and from the accumulator ring to target are currently in progress. This report describes the physics design of various systems of the injector linac and the accumulator ring.
△ Less
Submitted 3 October, 2016; v1 submitted 15 September, 2016;
originally announced September 2016.
-
Simultaneous polarization squeezing in polarized N photon state and diminution on a squeezing operation
Authors:
Namrata Shukla,
Ranjana Prakash
Abstract:
We study polarization squeezing of a pure photon number state which is obviously polarized but the mere change in the basis of polarization leads to simultaneous polarization squeezing in all the components of Stokes operator vector except those falling along or perpendicular to the direction of polarization state, is observed. We use the most general definition of polarization squeezing and discu…
▽ More
We study polarization squeezing of a pure photon number state which is obviously polarized but the mere change in the basis of polarization leads to simultaneous polarization squeezing in all the components of Stokes operator vector except those falling along or perpendicular to the direction of polarization state, is observed. We use the most general definition of polarization squeezing and discuss the experimental feasibility of the result. We also observe that a squeezing operation like non-degenerate parametric amplification of the state does not reveal simultaneous squeezing in all Stokes operator vectors and decreases in this sense.
△ Less
Submitted 28 March, 2016;
originally announced March 2016.
-
Alteration in Non-Classicality of Light on Passing Through a Linear Polarization Beam Splitter
Authors:
Namrata Shukla,
Ranjana Prakash
Abstract:
We observe the polarization squeezing in the mixture of a two mode squeezed vacuum and a simple coherent light through a linear polarization beam splitter. Squeezed vacuum not being squeezed in polarization, generates polarization squeezed light when superposed with coherent light. All the three Stokes parameters of the light produced on the output port of polarization beam splitter are found to b…
▽ More
We observe the polarization squeezing in the mixture of a two mode squeezed vacuum and a simple coherent light through a linear polarization beam splitter. Squeezed vacuum not being squeezed in polarization, generates polarization squeezed light when superposed with coherent light. All the three Stokes parameters of the light produced on the output port of polarization beam splitter are found to be squeezed and squeezing factor also depends upon the parameters of coherent light.
△ Less
Submitted 22 April, 2016; v1 submitted 28 March, 2016;
originally announced March 2016.
-
Viscoelastic fluid flow in a 2D channel bounded above by a deformable finite thickness elastic wall
Authors:
Debadi Chakraborty,
J. Ravi Prakash
Abstract:
The steady flow of three viscoelastic fluids (Oldroyd-B, FENE-P, and Owens model for blood) in a two-dimensional channel, partly bound by a deformable, finite thickness neo-Hookean solid, is computed. The limiting Weissenberg number beyond which computations fail to converge is found to increase with increasing dimensionless solid elasticity parameter Γ, following the trend Owens > FENE- P > Oldro…
▽ More
The steady flow of three viscoelastic fluids (Oldroyd-B, FENE-P, and Owens model for blood) in a two-dimensional channel, partly bound by a deformable, finite thickness neo-Hookean solid, is computed. The limiting Weissenberg number beyond which computations fail to converge is found to increase with increasing dimensionless solid elasticity parameter Γ, following the trend Owens > FENE- P > Oldroyd-B. The highly shear thinning nature of Owens model leads to the elastic solid always collapsing into the channel, for the wide range of values of Γ considered here. In the case of the FENE-P and Oldroyd-B models, however, the fluid-solid interface can be either within the channel, or bulge outwards, depending on the value of Γ. This behaviour differs considerably from predictions of earlier models that treat the deformable solid as a zero-thickness membrane, in which case the membrane always lies within the channel. The capacity of the solid wall to support both pressure and shear stress, in contrast to the zero-thickness membrane that only responds to pressure, is responsible for the observed difference. Compar- ison of the stress and velocity fields in the channel for the three viscoelastic fluids, with the predictions for a Newtonian fluid, reveals that shear thinning rather than elasticity is the key source of the observed differences in behaviour.
△ Less
Submitted 11 February, 2015;
originally announced February 2015.
-
Effect of Organoclay on Compatibilization, Thermal and Mechanical Properties of Polycarbonate/Polystyrene Blends
Authors:
A. K. Singh,
Rajiv Prakash
Abstract:
Pristine and organoclay modified polycarbonate/polystyrene (PC/PS) blends are prepared using melt-mixing technique. These blends are characterized for their morphology, structural, thermal and mechanical properties. Though our FTIR and XRD results show weak interactions between PC and PS phases, however, DSC and morphological study reveals that pristine PC/PS blends are immiscible. On other hand,…
▽ More
Pristine and organoclay modified polycarbonate/polystyrene (PC/PS) blends are prepared using melt-mixing technique. These blends are characterized for their morphology, structural, thermal and mechanical properties. Though our FTIR and XRD results show weak interactions between PC and PS phases, however, DSC and morphological study reveals that pristine PC/PS blends are immiscible. On other hand, introduction of organoclay results compatibilization of two polymer phases which is supported by significant shift in glass transition temperatures of the component phases and a distinct morphology having no phase segregation on sub-micron scale. Intercalation of polymers inside the clay gallery is achieved and is supported by XRD studies. A better thermal stability and higher value of modulus of the compatibilized blends compared to pristine PC/PS blends also support the reinforcement effect of organoclay to the PC/PS blend matrix.
△ Less
Submitted 8 April, 2014;
originally announced April 2014.
-
Measurement of Anomalous Moments of Creation and Annihilation Operators
Authors:
Ranjana Prakash,
Ajay K. Yadav
Abstract:
We propose a scheme for measurements of anomalous moments of creation and annihilation operators requiring only one beam splitter, only one photodetector and not many measurements with phase-shift $\varphi$ in homodyning. This has advantageous over scheme of Shchukin and Vogel [Phys. Rev. A 72, 043808 (2005)] which requires many photodetectors, many beam splitters and a large number of measurement…
▽ More
We propose a scheme for measurements of anomalous moments of creation and annihilation operators requiring only one beam splitter, only one photodetector and not many measurements with phase-shift $\varphi$ in homodyning. This has advantageous over scheme of Shchukin and Vogel [Phys. Rev. A 72, 043808 (2005)] which requires many photodetectors, many beam splitters and a large number of measurements with phase-shift $\varphi$ as a Fourier transform is calculated integrating over $\varphi$.
△ Less
Submitted 21 January, 2014;
originally announced January 2014.
-
Fluid-Structure Interaction in Deformable Microchannels
Authors:
Debadi Chakraborty,
J. Ravi Prakash,
Leslie Yeo,
James Friend
Abstract:
A microfluidic device is constructed from PDMS with a single channel having a short section that is a thin flexible membrane, in order to investigate the complex fluid-structure interaction that arises between a flowing fluid and a deformable wall. Experimental measurements of membrane deformation and pressure drop are compared with predictions of two-dimensional and three-dimensional computationa…
▽ More
A microfluidic device is constructed from PDMS with a single channel having a short section that is a thin flexible membrane, in order to investigate the complex fluid-structure interaction that arises between a flowing fluid and a deformable wall. Experimental measurements of membrane deformation and pressure drop are compared with predictions of two-dimensional and three-dimensional computational models which numerically solve the equations governing the elasticity of the membrane coupled with the equations of motion for the fluid. It is shown that the two-dimensional model, which assumes a finite thickness elastic beam that is infinitely wide, approximates reasonably well the three-dimensional model, and is in excellent agreement with experimental observations of the profile of the membrane, when the width of the membrane is beyond a critical thickness, determined to be roughly twice the length of the membrane.
△ Less
Submitted 29 March, 2012;
originally announced March 2012.
-
A Proposal for Experimental Detection of Amplitude nth-Power Squeezing
Authors:
Ranjana Prakash,
Ajay K. Yadav
Abstract:
Recently, in several theoretical investigations, amplitude nth-power squeezing has been studied with $n = 2,~3,~4,~5$. In the present paper, we give a proposal for experimental detection of amplitude $n$th-power squeezing using ordinary homodyning with coherent light for arbitrary power $n$ and discuss in detail its theory. The proposed scheme requires only repeated measurements of the factorial m…
▽ More
Recently, in several theoretical investigations, amplitude nth-power squeezing has been studied with $n = 2,~3,~4,~5$. In the present paper, we give a proposal for experimental detection of amplitude $n$th-power squeezing using ordinary homodyning with coherent light for arbitrary power $n$ and discuss in detail its theory. The proposed scheme requires only repeated measurements of the factorial moments of number of photons in the light obtained after homodyning, with various shifts of phase of coherent light, and involves no approximations, whatsoever. This has advantage over the method proposed by Shchukin and Vogel [Phys. Rev. A 72 (2005) 043808] in that our method requires only one beam splitter and only one photodetector, and also lesser number of repetitions of experiment with phase-shifted coherent light.
△ Less
Submitted 21 January, 2014; v1 submitted 31 August, 2011;
originally announced August 2011.