-
Ultra-broadband Noise-Insulating Periodic Structures Made of Coupled Helmholtz Resonators
Authors:
Mariia Krasikova,
Aleksandra Pavliuk,
Sergey Krasikov,
Mikhail Kuzmin,
Andrey Lutovinov,
Anton Melnikov,
Yuri Baloshin,
David A. Powell,
Steffen Marburg,
Andrey Bogdanov
Abstract:
Acoustic metamaterials and phononic crystals represent a promising platform for the development of noise-insulating systems characterized by a low weight and small thickness. Nevertheless, the operational spectral range of these structures is usually quite narrow, limiting their application as substitutions of conventional noise-insulating systems. In this work, the problem is tackled by demonstra…
▽ More
Acoustic metamaterials and phononic crystals represent a promising platform for the development of noise-insulating systems characterized by a low weight and small thickness. Nevertheless, the operational spectral range of these structures is usually quite narrow, limiting their application as substitutions of conventional noise-insulating systems. In this work, the problem is tackled by demonstration of several ways for the improvement of noise-insulating properties of the periodic structures based on coupled Helmholtz resonators. It is shown that tuning of local coupling between the resonators leads to the formation of ultra-broad stop-bands in the transmission spectra. This property is linked to band structures of the equivalent infinitely periodic systems and is discussed in terms of band-gap engineering. The local coupling strength is varied via several means, including introduction of the so-called chirped structures and lossy resonators with porous inserts. The stop-band engineering procedure is supported by genetic algorithm optimization and the numerical calculations are verified by experimental measurements.
△ Less
Submitted 27 July, 2023;
originally announced July 2023.
-
Planar Metasurface Antenna with Tunable via Boundaries for Computational Imaging
Authors:
Toufiq M. Hossain,
Andrey E. Miroshnichenko,
David A. Powell
Abstract:
The fusion of metasurface antennas and computational imaging facilitates the design of microwave imaging systems which require no lenses, phase shifters or moving parts. The technique involves the generation of appropriately designed diverse measurement modes to encode the scene information into a small number of measurements. We propose a novel boundary-tunable parallel plate waveguide-based meta…
▽ More
The fusion of metasurface antennas and computational imaging facilitates the design of microwave imaging systems which require no lenses, phase shifters or moving parts. The technique involves the generation of appropriately designed diverse measurement modes to encode the scene information into a small number of measurements. We propose a novel boundary-tunable parallel plate waveguide-based metasurface antenna for computational microwave imaging. The proposed antenna leverages a switchable boundary of two layers of vias, to efficiently change the waveguide modes supported by the antenna cavity, leading to diverse measurement modes in the scene plane. The superiority of the boundary tuning approach over the frequency diversity approach for the same antenna is confirmed using the singular value decomposition. Synthetic imaging is performed using a coupled dipole model, which quantitatively proves the efficacy of the proposed antenna along with the robustness against noise down to 15 dB SNR.
△ Less
Submitted 13 December, 2022;
originally announced December 2022.
-
A General Framework of Bound States in the Continuum in an Open Acoustic Resonator
Authors:
Lujun Huang,
Bin Jia,
Artem S Pilipchuk,
Yankei Chiang,
Sibo Huang,
Junfei Li,
Chen Shen,
Evgeny N Bulgakov,
Fu Deng,
David A Powell,
Steven A Cummer,
Yong Li,
Almas F Sadreev,
Andrey E Miroshnichenko
Abstract:
Bound states in the continuum (BICs) provide a viable way of achieving high-Q resonances in both photonics and acoustics. In this work, we proposed a general method of constructing Friedrich-Wintgen (FW) BICs and accidental BICs in a coupled acoustic waveguide-resonator system. We demonstrated that FW BICs can be achieved with arbitrary two degenerate resonances in a closed resonator regardless of…
▽ More
Bound states in the continuum (BICs) provide a viable way of achieving high-Q resonances in both photonics and acoustics. In this work, we proposed a general method of constructing Friedrich-Wintgen (FW) BICs and accidental BICs in a coupled acoustic waveguide-resonator system. We demonstrated that FW BICs can be achieved with arbitrary two degenerate resonances in a closed resonator regardless of whether they have the same or opposite parity. Moreover, their eigenmode profiles can be arbitrarily engineered by adjusting the position of attached waveguide. That suggests an effective way of continuous switching the nature of BIC from FW BIC to symmetry-protected BIC or accidental BICs. Also, such BICs are sustained in the coupled waveguide-resonator system with shapes such as rectangle, ellipse, and rhomboid. These interesting phenomena are well explained by the two-level effective non Hermitian Hamiltonian, where two strongly coupled degenerate modes play a major role in forming such FW BICs. Besides, we found that such an open system also supports accidental BICs in geometry space instead of momentum space via tuning the position of attached waveguide, which are attributed to the quenched coupling between the waveguide and eigenmodes of the closed cavity. Finally, we fabricated a series of 3D coupled-resonator-waveguide and experimentally verified the existence of FW BICs and accidental BICs by measuring the transmission spectra. Our results complement the current BIC library in acoustics and provide new routes for designing novel acoustic devices, such as in acoustic absorbers, filters and sensors.
△ Less
Submitted 14 July, 2022;
originally announced August 2022.
-
Metahouse: noise-insulating chamber based on periodic structures
Authors:
Mariia Krasikova,
Sergey Krasikov,
Anton Melnikov,
Yuri Baloshin,
Steffen Marburg,
David Powell,
Andrey Bogdanov
Abstract:
Noise pollution remains a challenging problem requiring the development of novel systems for noise insulation. Extensive work in the field of acoustic metamaterials has led to occurrence of various ventilated structures which, however, are usually demonstrated for rather narrow regions of the audible spectrum. In this work, we further extend the idea of metamaterial-based systems develo** a conc…
▽ More
Noise pollution remains a challenging problem requiring the development of novel systems for noise insulation. Extensive work in the field of acoustic metamaterials has led to occurrence of various ventilated structures which, however, are usually demonstrated for rather narrow regions of the audible spectrum. In this work, we further extend the idea of metamaterial-based systems develo** a concept of a metahouse chamber representing a ventilated structure for broadband noise insulation. Broad stop bands originate from strong coupling between pairs of Helmholtz resonators constituting the structure. We demonstrate numerically and experimentally the averaged transmission -18 dB within the spectral range from 1500 to 16500 Hz. The sparseness of the structure together with the possibility to use optically transparent materials suggest that the chamber may be also characterized by partial optical transparency depending on the mutual position of structural elements. The obtained results are promising for development of novel noise-insulating structures advancing urban science.
△ Less
Submitted 18 October, 2022; v1 submitted 4 April, 2022;
originally announced April 2022.
-
Microacoustic metagratings at ultra-high frequencies fabricated by two-photon lithography
Authors:
Anton Melnikov,
Sören Köble,
Severin Schweiger,
Yan Kei Chiang,
Steffen Marburg,
David A. Powell
Abstract:
The recently proposed bianisotropic acoustic metagratings offer promising opportunities for passive acoustic wavefront manipulation, which is of particular interest in flat acoustic lenses and ultrasound imaging at ultra-high frequency ultrasound. Despite this fact, acoustic metagratings have never been scaled to MHz frequencies that are common in ultrasound imaging. One of the greatest challenges…
▽ More
The recently proposed bianisotropic acoustic metagratings offer promising opportunities for passive acoustic wavefront manipulation, which is of particular interest in flat acoustic lenses and ultrasound imaging at ultra-high frequency ultrasound. Despite this fact, acoustic metagratings have never been scaled to MHz frequencies that are common in ultrasound imaging. One of the greatest challenges is the production of complex structures of microscopic size. Owing to two-photon polymerization, a novel fabrication technique from the view of acoustic metamaterials, it is now possible to precisely manufacture sub-wavelength structures in this frequency range. However, shrinking in size poses another challenge; the increasing thermoviscous effects lead to considerable losses, which must be taken into account in the design. In this work we propose three microacoustic metagrating designs refracting a normally incident wave towards -35$^{\circ}$ at 2 MHz. In order to develop metaatoms insensitive to thermoviscous effects we use shape optimization techniques incorporating the linearized Navier-Stokes equations discretized with finite element method. We report for the first time microscopic acoustic metamaterials manufactured using two-photon polymerization and, subsequently, experimentally verify their effectively using a capacitive micromachined ultrasonic transducer as source and an optical microphone as a detector in a range from 1.8 MHz to 2.2 MHz. We demonstrate not just that a microacoustic metagrating can effectively redirect the normally incident wave despite the thermoviscous losses, but also that it being only 0.29$λ$ thick can allocate 90% of the transmitted energy in the $-$1st diffraction order.
△ Less
Submitted 7 February, 2022;
originally announced February 2022.
-
Superfluid transition temperature and fluctuation theory of spin-orbit and Rabi-coupled fermions with tunable interactions
Authors:
Philip D. Powell,
Gordon Baym,
Carlos Sa de Melo
Abstract:
We obtain the superfluid transition temperature of equal Rashba-Dresselhaus spin-orbit and Rabi-coupled Fermi superfluids, from the Bardeen-Cooper-Schrieffer (BCS) to Bose-Einstein condensate (BEC) regimes in three dimensions for tunable $s$-wave interactions. In the presence of Rabi coupling, we find that spin-orbit coupling enhances (reduces) the critical temperature in the BEC (BCS) limit. For…
▽ More
We obtain the superfluid transition temperature of equal Rashba-Dresselhaus spin-orbit and Rabi-coupled Fermi superfluids, from the Bardeen-Cooper-Schrieffer (BCS) to Bose-Einstein condensate (BEC) regimes in three dimensions for tunable $s$-wave interactions. In the presence of Rabi coupling, we find that spin-orbit coupling enhances (reduces) the critical temperature in the BEC (BCS) limit. For fixed interactions, we show that spin-orbit coupling can convert a first-order (discontinuous) phase transition into a second-order (continuous) phase transition, as a function of Rabi coupling. We derive the Ginzburg-Landau free energy to sixth power in the superfluid order parameter to describe both continuous and discontinuous phase transitions as a function of spin-orbit and Rabi couplings. Lastly, we develop a time-dependent Ginzburg-Landau fluctuation theory for an arbitrary mixture of Rashba and Dresselhaus spin-orbit couplings at any interaction strength.
△ Less
Submitted 2 June, 2022; v1 submitted 27 January, 2022;
originally announced January 2022.
-
Topological Supercavity Resonances In the Finite System
Authors:
Lujun Huang,
Bin Jia,
Yan Kei Chiang,
Sibo Huang,
Chen Shen,
Fu Deng,
Tianzhi Yang,
David A Powell,
Yong Li,
Andrey E Miroshnichenko
Abstract:
Acoustic resonant cavities play a vital role in modern acoustical systems. They have led to many essential applications for noise control, biomedical ultrasonics, and underwater communications. The ultrahigh quality-factor resonances are highly desired for some applications like high-resolution acoustic sensors and acoustic lasers. Here, we theoretically propose and experimentally demonstrate a ne…
▽ More
Acoustic resonant cavities play a vital role in modern acoustical systems. They have led to many essential applications for noise control, biomedical ultrasonics, and underwater communications. The ultrahigh quality-factor resonances are highly desired for some applications like high-resolution acoustic sensors and acoustic lasers. Here, we theoretically propose and experimentally demonstrate a new class of supercavity resonances in a coupled acoustic resonators system, arising from the merged bound states in the continuum (BICs) in geometry space. We demonstrate their topological origin by explicitly calculating their topological charges before and after BIC merging, accompanied by charges annihilation. Comparing with other types of BICs, they are robust to the perturbation brought by fabrication imperfection. Moreover, we found that such supercavity modes can be linked with the Friedrich-Wintgen BICs supported by an entire rectangular (cuboid) resonator sandwiched between two rectangular (or circular) waveguides, and thus more supercavity modes are constructed. Then, we fabricate these coupled resonators and experimentally confirm such a unique phenomenon: moving, merging, and vanishing of BICs by measuring their reflection spectra, which show good agreement with the numerical simulation and theoretical prediction of mode evolution. Finally, given the similar wave nature of acoustic and electromagnetic waves, such merged BICs also can be constructed in a coupled photonic resonator system. Our results may find exciting applications in acoustic and photonics, such as enhanced acoustic emission, filtering, and sensing.
△ Less
Submitted 14 January, 2022;
originally announced January 2022.
-
Willis coupling-induced acoustic radiation force and torque reversal
Authors:
Shahrokh Sepehrirahnama,
Sebastian Oberst,
Yan Kei Chiang,
David A. Powell
Abstract:
Acoustic meta-atoms serve as the building blocks of metamaterials, with linear properties designed to achieve functions such as beam steering, cloaking and focusing. They have also been used to shape the characteristics of incident acoustic fields, which led to the manipulation of acoustic radiation force and torque for development of acoustic tweezers with improved spatial resolution. However, ac…
▽ More
Acoustic meta-atoms serve as the building blocks of metamaterials, with linear properties designed to achieve functions such as beam steering, cloaking and focusing. They have also been used to shape the characteristics of incident acoustic fields, which led to the manipulation of acoustic radiation force and torque for development of acoustic tweezers with improved spatial resolution. However, acoustic radiation force and torque also depend on the shape of the object, which strongly affects its scattering properties. We show that by designing linear properties of an object using metamaterial concepts, the nonlinear acoustic effects of radiation force and torque can be controlled. Trapped objects are typically small compared to the wavelength, and are described as particles, inducing monopole and dipole scattering. We extend such models to a polarizability tensor including Willis coupling terms, as a measure of asymmetry, capturing the significance of geometrical features. We apply our model to a three-dimensional, sub-wavelength meta-atom with maximal Willis coupling, demonstrating that the force and the torque can be reversed relative to an equivalent symmetrical particle. By considering shape asymmetry in the acoustic radiation force and torque, Gorkov's fundamental theory of acoustophoresis is thereby extended. Asymmetrical shapes influence the acoustic fields by shifting the stable trap** location, highlighting a potential for tunable, shape-dependent particle sorting.
△ Less
Submitted 14 February, 2022; v1 submitted 4 October, 2021;
originally announced October 2021.
-
Acoustic radiation force and radiation torque beyond particles: Effects of non-spherical shape and Willis coupling
Authors:
Shahrokh Sepehrirahnama,
Sebastian Oberst,
Yan Kei Chiang,
David Powell
Abstract:
Acoustophoresis deals with the manipulation of sub-wavelength scatterers in an incident acoustic field. The geometric details of manipulated particles are often neglected by replacing them with equivalent symmetric geometries such as spheres, spheroids, cylinders or disks. It has been demonstrated that geometric asymmetry, represented by Willis coupling terms, can strongly affect the scattering of…
▽ More
Acoustophoresis deals with the manipulation of sub-wavelength scatterers in an incident acoustic field. The geometric details of manipulated particles are often neglected by replacing them with equivalent symmetric geometries such as spheres, spheroids, cylinders or disks. It has been demonstrated that geometric asymmetry, represented by Willis coupling terms, can strongly affect the scattering of a small object, hence neglecting these terms may miss important force contributions. In this work, we present a generalized formalism of acoustic radiation force and radiation torque based on the polarizability tensor, where Willis coupling terms are included to account for geometric asymmetry. Following Gorkov's approach, the effects of geometric asymmetry are explicitly formulated as additional terms in the radiation force and torque expressions. By breaking the symmetry of a sphere along one axis using intrusion and protrusion, we characterize the changes in the force and torque in terms of partial components, associated with the direct and Willis Coupling coefficients of the polarizability tensor. We investigate in detail the cases of standing and travelling plane waves, showing how the equilibrium positions and angles are shifted by these additional terms. We show that while the contributions of asymmetry to the force are often negligible for small particles, these terms greatly affect the radiation torque. Our presented theory, providing a way of calculating radiation force and torque directly from polarizability coefficients, shows that in general it is essential to account for shape of objects undergoing acoustophoretic manipulation, and this may have important implications for applications such as the manipulation of biological cells.
△ Less
Submitted 4 July, 2021;
originally announced July 2021.
-
Scalable Metagrating for Efficient Ultrasonic Focusing
Authors:
Yan Kei Chiang,
Li Quan,
Yugui Peng,
Shahrokh Sepehrirahnama,
Sebastian Oberst,
Andrea Alù,
David Powell
Abstract:
Acoustic focusing plays a pivotal role in a wide variety of applications ranging from medical science to nondestructive testing. Previous works have shown that acoustic metagratings can overcome the inherent efficiency limitations of gradient metasurfaces in beam steering. In this work, we propose a new design principle for acoustic metalenses, based on metagratings, to achieve efficient ultrasoni…
▽ More
Acoustic focusing plays a pivotal role in a wide variety of applications ranging from medical science to nondestructive testing. Previous works have shown that acoustic metagratings can overcome the inherent efficiency limitations of gradient metasurfaces in beam steering. In this work, we propose a new design principle for acoustic metalenses, based on metagratings, to achieve efficient ultrasonic focusing. We achieve beam focusing by locally controlling the excitation of a single diffraction order with the use of adiabatically varying metagratings over the lens aperture. A set of metagratings is optimized by a semi-analytical approach using a genetic algorithm, enabling efficient anomalous reflection for a wide range of reflection angles. Numerical results reveal that our metalens can effectively focus im**ing ultrasonic waves to a focal point of FWHM = 0.364λ. The focusing performance of the metalens is demonstrated experimentally, validating our proposed approach.
△ Less
Submitted 26 April, 2021;
originally announced April 2021.
-
Printed tapered leaky-wave antennas for W-band frequencies
Authors:
Andreas E. Olk,
Mingkai Liu,
David A. Powell
Abstract:
Despite their great potential in communication and sensing applications, printed leaky-wave antennas have rarely been reported at mm-wave frequencies. In this paper, tapered leaky-wave antennas operating at 80 GHz are designed, fabricated and experimentally characterized. While most continuous leaky-wave antennas use subwavelength strips or other comparably small elements, in this work, the surfac…
▽ More
Despite their great potential in communication and sensing applications, printed leaky-wave antennas have rarely been reported at mm-wave frequencies. In this paper, tapered leaky-wave antennas operating at 80 GHz are designed, fabricated and experimentally characterized. While most continuous leaky-wave antennas use subwavelength strips or other comparably small elements, in this work, the surface impedance is discretized very coarsely using only three square patches per period. With this architecture, a wide range of surface reactance can be achieved while maintaining a minimum feature size of the metallic pattern that is feasible for printed circuit fabrication. As the analytical solution for the bandstructure of sinusoidally modulated reactance surfaces is inaccurate for coarse discretization, we find it using full-wave simulation. In order to control side lobes effectively, we use a tapered aperture illumination according to the Taylor one-parameter distribution. A comprehensive experimental demonstration is presented, including near-field and far-field measurements. Therewith, we verify the designed aperture illumination and we reveal the origin of spurious far-field features. Side lobes are effectively suppressed and spurious radiation is reduced to -18 dB compared to the main lobe.
△ Less
Submitted 5 July, 2021; v1 submitted 7 April, 2021;
originally announced April 2021.
-
Sound Trap** in an Open Resonator
Authors:
Lujun Huang,
Yan Kei Chiang,
Sibo Huang,
Chen Shen,
Fu Deng,
Yi Cheng,
Bin Jia,
Yong Li,
David A Powell,
Andrey E Miroshnichenko
Abstract:
The ability of extreme sound energy confinement with high-quality factor (Q-factor) resonance is of vital importance for acoustic devices requiring high intensity and hypersensitivity in biological ultrasonics, enhanced collimated sound emission (i.e. sound laser) and high-resolution sensing. However, structures reported so far demonstrated a limited quality factor (Q-factor) of acoustic resonance…
▽ More
The ability of extreme sound energy confinement with high-quality factor (Q-factor) resonance is of vital importance for acoustic devices requiring high intensity and hypersensitivity in biological ultrasonics, enhanced collimated sound emission (i.e. sound laser) and high-resolution sensing. However, structures reported so far demonstrated a limited quality factor (Q-factor) of acoustic resonances, up to several tens in an open resonator. The emergence of bound states in the continuum (BIC) makes it possible to realize high-Q factor acoustic modes. Here, we report the theoretical design and experimental demonstration of acoustic BICs supported by a single open resonator. We predicted that such an open acoustic resonator could simultaneously support three types of BICs, including symmetry protected BIC, Friedrich-Wintgen BIC induced by mode interference, as well as a new kind of BIC: mirror-symmetry induced BIC. We also experimentally demonstrated the existence of all three types of BIC with Q-factor up to one order of magnitude greater than the highest Q-factor reported in an open resonator.
△ Less
Submitted 22 March, 2021;
originally announced March 2021.
-
Characterization of Broadband Focusing Microwave Metasurfaces at Oblique Incidence
Authors:
Ashif A. Fathnan,
Toufiq M. Hossain,
Dadin Mahmudin,
Yusuf N. Wijayanto,
David A. Powell
Abstract:
We report the characterization of an achromatic focusing metasurface at oblique incident angles. We show that in addition to the inherent off-axis aberrations that occurs due to the hyperbolic phase profile of the metasurface, the focusing performance is significantly degraded due to the meta-atoms' angular dispersion. To obtain insights into how the angular and spectral bandwidth of meta-atoms re…
▽ More
We report the characterization of an achromatic focusing metasurface at oblique incident angles. We show that in addition to the inherent off-axis aberrations that occurs due to the hyperbolic phase profile of the metasurface, the focusing performance is significantly degraded due to the meta-atoms' angular dispersion. To obtain insights into how the angular and spectral bandwidth of meta-atoms relate to the metasurface focusing performance, point-dipole models are used which incorporate different aspect's of the meta-atoms' angular response. It is emphasized that despite the meta-atoms being designed under the assumption that they support a single dipolar resonance, other resonances exist within the meta-atom geometry and become stronger at oblique incidence. These resonances disturb the designed phase and amplitude responses, resulting in lower focusing efficiency at higher incident angles. The modelling of higher order modes leads to good agreement with the experimental measurements, confirming that angular dispersion of the meta-atoms is the dominant mechanism in determining off-axis aberrations.
△ Less
Submitted 2 December, 2020;
originally announced December 2020.
-
Bandwidth Limit and Synthesis Approach for Single Resonance Ultrathin Metasurfaces
Authors:
Ashif A. Fathnan,
Andreas E. Olk,
David A. Powell
Abstract:
Metasurfaces have emerged as a promising technology for the manipulation of electromagnetic waves within a thin layer. In planar ultrathin metasurfaces, there exist rigorous narrowband design methods, based on the equivalent surface impedance of patterned metallic layers on dielectric substrates. In this work, we derive a limit on bandwidth achievable in these metasurfaces, based on constraints th…
▽ More
Metasurfaces have emerged as a promising technology for the manipulation of electromagnetic waves within a thin layer. In planar ultrathin metasurfaces, there exist rigorous narrowband design methods, based on the equivalent surface impedance of patterned metallic layers on dielectric substrates. In this work, we derive a limit on bandwidth achievable in these metasurfaces, based on constraints that their meta-atoms should be passive, causal and lossless, and that they should obey the time-bandwidth product rules of a single resonance structure. The results show that in addition to elementary design parameters involving variation of the surface impedance, the bandwidth is critically limited by the dielectric substrate thickness and permittivity. We then propose a synthesis method for broadband ultrathin metasurfaces, based on an LC resonance fit of the required surface impedance, and experimentally verify a broadband dispersive structure at millimeter-wave frequencies. This results in a bandwidth enhancement of over 90%, relative to a reference metasurface created with the narrowband design process.
△ Less
Submitted 3 July, 2020; v1 submitted 9 December, 2019;
originally announced December 2019.
-
High-efficiency refracting millimeter-wave metasurfaces
Authors:
Andreas E. Olk,
Pierre E. M. Macchi,
David A. Powell
Abstract:
Printed circuit metasurfaces have attracted significant attention in the microwave community for their versatile wavefront manipulation capability. Despite their promising potential in telecommunications and radar applications, few transmissive metasurfaces have been reported operating at millimeter-wave frequencies. Several secondary effects including fabrication tolerances, interlayer near-field…
▽ More
Printed circuit metasurfaces have attracted significant attention in the microwave community for their versatile wavefront manipulation capability. Despite their promising potential in telecommunications and radar applications, few transmissive metasurfaces have been reported operating at millimeter-wave frequencies. Several secondary effects including fabrication tolerances, interlayer near-field coupling and the roughness of conductors are more severe at such high frequencies and can cause significant performance degradation. Additionally, very accurate experimental techniques are required in order to characterise these effects. In this work, we present highly efficient refracting metasurfaces operating at 83 GHz. We use a synthesis technique that minimizes performance degradation due to effects such as interlayer near-field coupling and conductor roughness. Our experimental characterization includes an accurate determination of the intensity of all forward propagating Floquet harmonics in a broad frequency range. The experimental data shows very good agreement with full-wave simulation and verifies our synthesis method.
△ Less
Submitted 16 February, 2020; v1 submitted 13 September, 2019;
originally announced October 2019.
-
Accurate metasurface synthesis incorporating near-field coupling effects
Authors:
Andreas E. Olk,
David A. Powell
Abstract:
One of the most promising metasurface architectures for the microwave and terahertz frequency ranges consists of three patterned metallic layers separated by dielectrics. Such metasurfaces are well suited to planar fabrication techniques and their synthesis is facilitated by modelling them as impedance sheets separated by transmission lines. We show that this model can be significantly inaccurate…
▽ More
One of the most promising metasurface architectures for the microwave and terahertz frequency ranges consists of three patterned metallic layers separated by dielectrics. Such metasurfaces are well suited to planar fabrication techniques and their synthesis is facilitated by modelling them as impedance sheets separated by transmission lines. We show that this model can be significantly inaccurate in some cases, due to near-field coupling between metallic layers. This problem is particularly severe for higher frequency designs, where fabrication tolerances prevent the patterns from being highly-subwavelength in size. Since the near-field coupling is difficult to describe analytically, correcting for it in a design typically requires numerical optimization. We propose an extension of the widely used equivalent-circuit model to incorporate near-field coupling and show that the extended model can predict the scattering parameters of a metasurface accurately. Based on our extended model, we introduce an improved metasurface synthesis algorithm that gives physical insight to the problem and efficiently compensates for the perturbations induced by near-field coupling. Using the proposed algorithm, a Huygens metasurface for beam refraction is synthesized showing a performance close to the theoretical efficiency limit despite the presence of strong near-field coupling.
△ Less
Submitted 15 May, 2019;
originally announced May 2019.
-
Refraction efficiency of Huygens' and bianisotropic terahertz metasurfaces
Authors:
Michael A. Cole,
Aristeidis Lamprianidis,
Ilya V. Shadrivov,
David A. Powell
Abstract:
Metasurfaces are an enabling technology for complex wave manipulation functions, including in the terahertz frequency range, where they are expected to advance security, imaging, sensing, and communications technology. For operation in transmission, Huygens' metasurfaces are commonly used, since their good impedance match to the surrounding media minimizes reflections and maximizes transmission. R…
▽ More
Metasurfaces are an enabling technology for complex wave manipulation functions, including in the terahertz frequency range, where they are expected to advance security, imaging, sensing, and communications technology. For operation in transmission, Huygens' metasurfaces are commonly used, since their good impedance match to the surrounding media minimizes reflections and maximizes transmission. Recent theoretical work has shown that Huygens' metasurfaces are non-optimal, particularly for large angles of refraction, and that to eliminate reflections and spurious diffracted beams it is necessary to use a bianisotropic metasurface. However, it remains to be demonstrated how significant the efficiency improvement is when using bianisotropic metasurfaces, considering all the non-ideal features that arise when implementing the metasurface design with real meta-atoms. Here we compare concrete terahertz metasurface designs based on the Huygens' and Omega-type bianisotropic approaches, demonstrating anomalous refraction angles for 55 degrees, and 70 degrees. We show that for the lower angle of 55 degrees, there is no significant improvement when using the bianisotropic design, whereas for refraction at 70 degrees the bianisotropic design shows much higher efficiency and fidelity of refraction into the designed direction. We also demonstrate the strong perturbations caused by near-field interaction, both between and within cells, which we compensate using numerical optimization.
△ Less
Submitted 11 December, 2018;
originally announced December 2018.
-
Acoustic meta-atom with maximum Willis coupling
Authors:
Anton Melnikov,
Li Quan,
Sebastian Oberst,
Andrea Alù,
Steffen Marburg,
David Powell
Abstract:
Acoustic metamaterials are structures with exotic acoustic properties, having promising applications in acoustic beam steering, focusing, impedance matching, absorption and isolation. Recent work has shown that the efficiency of many acoustic metamaterials can be enhanced by controlling an additional parameter known as Willis coupling, which is analogous to bianisotropy in electromagnetic metamate…
▽ More
Acoustic metamaterials are structures with exotic acoustic properties, having promising applications in acoustic beam steering, focusing, impedance matching, absorption and isolation. Recent work has shown that the efficiency of many acoustic metamaterials can be enhanced by controlling an additional parameter known as Willis coupling, which is analogous to bianisotropy in electromagnetic metamaterials. The magnitude of Willis coupling in an acoustic meta-atom has been shown theoretically to have an upper limit, however the feasibility of reaching this limit has not been experimentally investigated. Here we introduce a meta-atom with Willis coupling which closely approaches this theoretical limit, that is much simpler and less prone to thermo-viscous losses than previously reported structures. We perform two-dimensional experiments to measure the strong Willis coupling, supported by numerical calculations. Our meta-atom geometry is readily modeled analytically, enabling the strength of Willis coupling and its peak frequency to be easily controlled. Together with its ease of fabrication, this will facilitate the design of future high efficiency acoustic devices.
△ Less
Submitted 5 December, 2018;
originally announced December 2018.
-
Measuring monopole and dipole polarizability of acoustic meta-atoms
Authors:
Joshua Jordaan,
Stefan Punzet,
Anton Melnikov,
Alexander Sanches,
Sebastian Oberst,
Steffen Marburg,
David A. Powell
Abstract:
We present a method to extract monopole and dipole polarizability from experimental measurements of two-dimensional acoustic meta-atoms. In contrast to extraction from numerical results, this enables all second-order effects and uncertainties in material properties to be accounted for. We apply the technique to 3D-printed labyrinthine meta-atoms of a variety of geometries. We show that the polariz…
▽ More
We present a method to extract monopole and dipole polarizability from experimental measurements of two-dimensional acoustic meta-atoms. In contrast to extraction from numerical results, this enables all second-order effects and uncertainties in material properties to be accounted for. We apply the technique to 3D-printed labyrinthine meta-atoms of a variety of geometries. We show that the polarizability of structures with shorter acoustic path length agrees well with numerical results. However, those with longer path lengths suffer strong additional dam**, which we attribute to the strong viscous and thermal losses in narrow channels.
△ Less
Submitted 3 December, 2018; v1 submitted 20 August, 2018;
originally announced September 2018.
-
Time-varying Huygens' meta-devices for parametric waves
Authors:
Mingkai Liu,
David A. Powell,
Yair Zarate,
Ilya V. Shadrivov
Abstract:
Huygens' metasurfaces have demonstrated almost arbitrary control over the shape of a scattered beam, however, its spatial profile is typically fixed at fabrication time. Dynamic reconfiguration of this beam profile with tunable elements remains challenging, due to the need to maintain the Huygens' condition across the tuning range. In this work, we experimentally demonstrate that a time-varying me…
▽ More
Huygens' metasurfaces have demonstrated almost arbitrary control over the shape of a scattered beam, however, its spatial profile is typically fixed at fabrication time. Dynamic reconfiguration of this beam profile with tunable elements remains challenging, due to the need to maintain the Huygens' condition across the tuning range. In this work, we experimentally demonstrate that a time-varying metadevice which performs frequency conversion can steer transmitted or reflected beams in an almost arbitrary manner, with fully dynamic control. Our time-varying Huygens' metadevice is made of both electric and magnetic meta-atoms with independently controlled modulation, and the phase of this modulation is imprinted on the scattered parametric waves, controlling their shapes and directions. We develop a theory which shows how the scattering directionality, phase and conversion efficiency of sidebands can be manipulated almost arbitrarily. We demonstrate novel effects including all-angle beam steering and frequency-multiplexed functionalities at microwave frequencies around 4 GHz, using varactor diodes as tunable elements. We believe that the concept can be extended to other frequency bands, enabling metasurfaces with arbitrary phase pattern that can be dynamically tuned over the complete 2πrange.
△ Less
Submitted 1 December, 2018; v1 submitted 23 July, 2018;
originally announced July 2018.
-
Interference between the modes of an all-dielectric meta-atom
Authors:
David A. Powell
Abstract:
The modes of silicon meta-atoms are investigated, motivated by their use as building blocks of Huygens' metasurfaces. A model based on these modes is presented, giving a clear physical explanation of all features in the extinction spectrum. Counter-intuitively, this can show negative contributions to extinction, which are shown to arise from the interference between non-orthogonal modes. The direc…
▽ More
The modes of silicon meta-atoms are investigated, motivated by their use as building blocks of Huygens' metasurfaces. A model based on these modes is presented, giving a clear physical explanation of all features in the extinction spectrum. Counter-intuitively, this can show negative contributions to extinction, which are shown to arise from the interference between non-orthogonal modes. The direct and interference contributions to extinction are determined, showing that conservation of energy is preserved. The Huygens' condition of matched electric and magnetic dipole moments leads to strong forward scattering and suppressed back scattering. It is shown that higher order modes with appropriate symmetry generalise this condition, leading to multiple bands of directional scattering. The presented results are obtained using a robust approach to find the modes of nano-photonic scatterers, commonly referred to as quasi-normal modes. By utilising an integral formulation of Maxwell's equations, this work avoids the problem of normalising diverging far-fields, which other approaches require. The model and presented results are implemented in open-source code.
△ Less
Submitted 2 February, 2017; v1 submitted 17 October, 2016;
originally announced October 2016.
-
Tunable Focusing by a Flexible Metasurface
Authors:
Yair Zárate,
Ilya V. Shadrivov,
David A. Powell
Abstract:
An efficient reflective elastic metasurface with tunable focusing point is proposed. The metasurface is based on electric resonators embedded in a stretchable elastic substrate. The focal length is controlled by mean of the stretching applied applied to the sample. The results predicted by theory and numerical simulations are experimentally verified. Our proposal shows that smart engineering elast…
▽ More
An efficient reflective elastic metasurface with tunable focusing point is proposed. The metasurface is based on electric resonators embedded in a stretchable elastic substrate. The focal length is controlled by mean of the stretching applied applied to the sample. The results predicted by theory and numerical simulations are experimentally verified. Our proposal shows that smart engineering elastic metamaterials are an effective platform for new functional devices based on metamaterials.
△ Less
Submitted 17 April, 2016;
originally announced April 2016.
-
Purcell effect in Hyperbolic Metamaterial Resonators
Authors:
Alexey P. Slobozhanyuk,
Pavel Ginzburg,
David A. Powell,
Ivan Iorsh,
Alexander S. Shalin,
Paulina Segovia,
Alexey V. Krasavin,
Gregory A. Wurtz,
Viktor A. Podolskiy,
Pavel A. Belov,
Anatoly V. Zayats
Abstract:
The radiation dynamics of optical emitters can be manipulated by properly designed material structures providing high local density of photonic states, a phenomenon often referred to as the Purcell effect. Plasmonic nanorod metamaterials with hyperbolic dispersion of electromagnetic modes are believed to deliver a significant Purcell enhancement with both broadband and non-resonant nature. Here, w…
▽ More
The radiation dynamics of optical emitters can be manipulated by properly designed material structures providing high local density of photonic states, a phenomenon often referred to as the Purcell effect. Plasmonic nanorod metamaterials with hyperbolic dispersion of electromagnetic modes are believed to deliver a significant Purcell enhancement with both broadband and non-resonant nature. Here, we have investigated finite-size cavities formed by nanorod metamaterials and shown that the main mechanism of the Purcell effect in these hyperbolic resonators originates from the cavity hyperbolic modes, which in a microscopic description stem from the interacting cylindrical surface plasmon modes of the finite number of nanorods forming the cavity. It is found that emitters polarized perpendicular to the nanorods exhibit strong decay rate enhancement, which is predominantly influenced by the rod length. We demonstrate that this enhancement originates from Fabry-Perot modes of the metamaterial cavity. The Purcell factors, delivered by those cavity modes, reach several hundred, which is 4-5 times larger than those emerging at the epsilon near zero transition frequencies. The effect of enhancement is less pronounced for dipoles, polarized along the rods. Furthermore, it was shown that the Purcell factor delivered by Fabry-Perot modes follows the dimension parameters of the array, while the decay rate in the epsilon near-zero regime is almost insensitive to geometry. The presented analysis shows a possibility to engineer emitter properties in the structured metamaterials, addressing their microscopic structure.
△ Less
Submitted 27 April, 2015;
originally announced April 2015.
-
An exact general remeshing scheme applied to physically conservative voxelization
Authors:
Devon Powell,
Tom Abel
Abstract:
We present an exact general remeshing scheme to compute analytic integrals of polynomial functions over the intersections between convex polyhedral cells of old and new meshes. In physics applications this allows one to ensure global mass, momentum, and energy conservation while applying higher-order polynomial interpolation. We elaborate on applications of our algorithm arising in the analysis of…
▽ More
We present an exact general remeshing scheme to compute analytic integrals of polynomial functions over the intersections between convex polyhedral cells of old and new meshes. In physics applications this allows one to ensure global mass, momentum, and energy conservation while applying higher-order polynomial interpolation. We elaborate on applications of our algorithm arising in the analysis of cosmological N-body data, computer graphics, and continuum mechanics problems.
We focus on the particular case of remeshing tetrahedral cells onto a Cartesian grid such that the volume integral of the polynomial density function given on the input mesh is guaranteed to equal the corresponding integral over the output mesh. We refer to this as "physically conservative voxelization".
At the core of our method is an algorithm for intersecting two convex polyhedra by successively clip** one against the faces of the other. This algorithm is an implementation of the ideas presented abstractly by Sugihara (1994), who suggests using the planar graph representations of convex polyhedra to ensure topological consistency of the output. This makes our implementation robust to geometric degeneracy in the input. We employ a simplicial decomposition to calculate moment integrals up to quadratic order over the resulting intersection domain.
We also address practical issues arising in a software implementation, including numerical stability in geometric calculations, management of cancellation errors, and extension to two dimensions. In a comparison to recent work, we show substantial performance gains. We provide a C implementation intended to be a fast, accurate, and robust tool for geometric calculations on polyhedral mesh elements.
△ Less
Submitted 1 June, 2015; v1 submitted 16 December, 2014;
originally announced December 2014.
-
The resonant dynamics of arbitrarily-shaped meta-atoms
Authors:
David A. Powell
Abstract:
Meta-atoms, nano-antennas, plasmonic particles and other small scatterers are commonly modeled in terms of their modes. However these modal solutions are seldom determined explicitly, due to the conceptual and numerical difficulties in solving eigenvalue problems for open systems with strong radiative losses. Here these modes are directly calculated from Maxwell's equations expressed in integral o…
▽ More
Meta-atoms, nano-antennas, plasmonic particles and other small scatterers are commonly modeled in terms of their modes. However these modal solutions are seldom determined explicitly, due to the conceptual and numerical difficulties in solving eigenvalue problems for open systems with strong radiative losses. Here these modes are directly calculated from Maxwell's equations expressed in integral operator form, by finding the complex frequencies which yield a homogenous solution. This gives a clear physical interpretation of the modes, and enables their conduction or polarization current distribution to be calculated numerically for particles of arbitrary shape. By combining the modal current distribution with a scalar impedance function, simple yet accurate models of scatterers are constructed which describe their response to an arbitrary incident field over a broad bandwidth. These models generalize both equivalent-dipole and and equivalent-circuit models to finite sized structures with multiple modes. They are applied here to explain the frequency-splitting for a pair of coupled split rings, and the accompanying change in radiative losses. The approach presented in this paper is made available in an open-source code.
△ Less
Submitted 10 July, 2014; v1 submitted 15 May, 2014;
originally announced May 2014.
-
Broadband chiral metamaterials with large optical activity
Authors:
Kirsty Hannam,
David A. Powell,
Ilya V. Shadrivov,
Yuri S. Kivshar
Abstract:
We study theoretically and experimentally a novel type of metamaterial with hybrid elements composed of twisted pairs of cross-shaped meta-atoms and their complements. We reveal that such two-layer metasurfaces demonstrate large, dispersionless optical activity at the transmission resonance accompanied by very low ellipticity. We develop a retrieval procedure to determine the effective material pa…
▽ More
We study theoretically and experimentally a novel type of metamaterial with hybrid elements composed of twisted pairs of cross-shaped meta-atoms and their complements. We reveal that such two-layer metasurfaces demonstrate large, dispersionless optical activity at the transmission resonance accompanied by very low ellipticity. We develop a retrieval procedure to determine the effective material parameters for this structure, which has lower-order symmetry ($\mathrm {C}_4$) than other commonly studied chiral structures. We verify our new theoretical approach by reproducing numerical and experimental scattering parameters.
△ Less
Submitted 30 January, 2014;
originally announced January 2014.
-
Spectroscopic, Structural, and Theoretical Studies of Halide Complexes with a Urea-based Tripodal Receptor
Authors:
Avijit Pramanik,
Douglas R. Powell,
Bryan M. Wong,
Md. Alamgir Hossain
Abstract:
A urea-based tripodal receptor L substituted with p-cyanophenyl groups has been studied for halide anions by $^1$H NMR spectroscopy, density functional theory (DFT) calculations and X-ray crystallography. The $^1$H NMR titration studies suggest that the receptor forms a 1:1 complex with an anion, showing the binding trend in the order of fluoride > chloride > bromide > iodide. The interaction of f…
▽ More
A urea-based tripodal receptor L substituted with p-cyanophenyl groups has been studied for halide anions by $^1$H NMR spectroscopy, density functional theory (DFT) calculations and X-ray crystallography. The $^1$H NMR titration studies suggest that the receptor forms a 1:1 complex with an anion, showing the binding trend in the order of fluoride > chloride > bromide > iodide. The interaction of fluoride anion with the receptor was further confirmed by 2D NOESY and $^{19}$F NMR spectroscopy in DMSO-d$_6$. DFT calculations indicate that the internal halide anion is held by six NH...X interactions with L, showing the highest binding energy for the fluoride complex. Structural characterization of the chloride, bromide, and silicon hexafluoride complexes of $[LH^+]$ reveals that the anion is externally located via hydrogen bonding interactions. For the bromide or chloride complex, two anions are bridged with two receptors to form a centrosymmetric dimer, while for the silicon hexafluoride complex, the anion is located within a cage formed by six ligands and two water molecules.
△ Less
Submitted 21 December, 2013;
originally announced December 2013.
-
A Self-assembled Fluoride-Water Cyclic Cluster of $[F(H_2O)]_4^{4-}$ in a Molecular Box
Authors:
Md. Alamgir Hossain,
Musabbir A. Saeed,
Avijit Pramanik,
Bryan M. Wong,
Syed A. Haque,
Douglas R. Powell
Abstract:
We present an unprecedented fluoride-water cyclic cluster of $[F(H_2O)]_4^{4-}$ assembled in a cuboid-shaped molecular box formed by two large macrocycles. Structural characterization reveals that the $[F(H_2O)]_4^{4-}$ is assembled by strong H-bonding interactions (OH...F = 2.684(3) to 2.724(3) Å), where a fluoride anion plays the topological role of a water molecule in the classical cyclic water…
▽ More
We present an unprecedented fluoride-water cyclic cluster of $[F(H_2O)]_4^{4-}$ assembled in a cuboid-shaped molecular box formed by two large macrocycles. Structural characterization reveals that the $[F(H_2O)]_4^{4-}$ is assembled by strong H-bonding interactions (OH...F = 2.684(3) to 2.724(3) Å), where a fluoride anion plays the topological role of a water molecule in the classical cyclic water octamer. The interaction of fluoride was further confirmed by $^{19}$F NMR and $^1$H NMR spectroscopies, indicating the encapsulation of the anionic species within the cavity in solution. High level DFT calculations and Bader topological analyses fully support the crystallographic results, demonstrating that the bonding arrangement in the fluoride-water cluster arises from the unique geometry of the host.
△ Less
Submitted 21 December, 2013;
originally announced December 2013.
-
Twists and turns for metamaterials
Authors:
Mingkai Liu,
Yue Sun,
David A. Powell,
Ilya V. Shadrivov,
Mikhail Lapine,
Ross C. McPhedran,
Yuri S. Kivshar
Abstract:
We propose and verify experimentally a new concept for achieving strong nonlinear coupling between the electromagnetic and elastic properties in metamaterials. This coupling is provided through a novel degree of freedom in metamaterial design: internal rotation within structural elements. Our meta-atoms have high sensitivity to electromagnetic wave power, and the elastic and electromagnetic proper…
▽ More
We propose and verify experimentally a new concept for achieving strong nonlinear coupling between the electromagnetic and elastic properties in metamaterials. This coupling is provided through a novel degree of freedom in metamaterial design: internal rotation within structural elements. Our meta-atoms have high sensitivity to electromagnetic wave power, and the elastic and electromagnetic properties can be independently designed to optimise the response. We demonstrate a rich range of nonlinear phenomena including self-tuning and bistability, and provide a comprehensive experimental demonstration of the predicted effects.
△ Less
Submitted 24 January, 2013;
originally announced January 2013.
-
Dispersionless optical activity in metamaterials
Authors:
Kirsty Hannam,
David A. Powell,
Ilya V. Shadrivov,
Yuri S. Kivshar
Abstract:
We introduce a chiral metamaterial with strong, non-resonant optical activity, and very low polarization ellipticity. We achieve this by combining a meta-atom and its complementary structure into a meta-molecule, resulting in the coupling of magnetic and electric dipole responses. In contrast to either a pair of crosses, or complementary crosses, this structure has low dispersion in the optical ac…
▽ More
We introduce a chiral metamaterial with strong, non-resonant optical activity, and very low polarization ellipticity. We achieve this by combining a meta-atom and its complementary structure into a meta-molecule, resulting in the coupling of magnetic and electric dipole responses. In contrast to either a pair of crosses, or complementary crosses, this structure has low dispersion in the optical activity at the transmission resonance. We also study the excitation mechanism in this structure, and optimize the optical activity through changing the twist angle.
△ Less
Submitted 1 February, 2014; v1 submitted 6 December, 2012;
originally announced December 2012.
-
Discrete dissipative localized modes in nonlinear magnetic metamaterials
Authors:
Nikolay N. Rosanov,
Nina V. Vysotina,
Anatoly N. Shatsev,
Ilya V. Shadrivov,
David A. Powell,
Yuri S. Kivshar
Abstract:
We analyze the existence, stability, and propagation of dissipative discrete localized modes in one- and two-dimensional nonlinear lattices composed of weakly coupled split-ring resonators (SRRs) excited by an external electromagnetic field. We employ the near-field interaction approach for describing quasi-static electric and magnetic interaction between the resonators, and demonstrate the crucia…
▽ More
We analyze the existence, stability, and propagation of dissipative discrete localized modes in one- and two-dimensional nonlinear lattices composed of weakly coupled split-ring resonators (SRRs) excited by an external electromagnetic field. We employ the near-field interaction approach for describing quasi-static electric and magnetic interaction between the resonators, and demonstrate the crucial importance of the electric coupling, which can completely reverse the sign of the overall interaction between the resonators. We derive the effective nonlinear model and analyze the properties of nonlinear localized modes excited in one- and two-dimensional lattices. In particular, we study nonlinear magnetic domain walls (the so-called switching waves) separating two different states of nonlinear magnetization, and reveal the bistable dependence of the domain wall velocity on the external field. Then, we study two-dimensional localized modes in nonlinear lattices of SRRs and demonstrate that larger domains may experience modulational instability and splitting.
△ Less
Submitted 20 November, 2011;
originally announced November 2011.
-
Tuning the Nonlinear Response of Coupled Split-Ring Resonators
Authors:
Kirsty E. Hannam,
David A. Powell,
Ilya V. Shadrivov,
Yuri S. Kivshar
Abstract:
We introduce the concept of controlling the nonlinear response of the metamaterial by altering its internal structure. We experimentally demonstrate tuning of the nonlinear response of two coupled split-ring resonators by changing their mutual position. This effect is achieved through modification of the structure of the coupled resonant modes, and their interaction with the incident field. By off…
▽ More
We introduce the concept of controlling the nonlinear response of the metamaterial by altering its internal structure. We experimentally demonstrate tuning of the nonlinear response of two coupled split-ring resonators by changing their mutual position. This effect is achieved through modification of the structure of the coupled resonant modes, and their interaction with the incident field. By offsetting the resonators we control the maximum currents through the nonlinear driving elements, which affects the nonlinear response of the system.
△ Less
Submitted 6 December, 2012; v1 submitted 15 September, 2011;
originally announced September 2011.
-
Metamaterials with conformational nonlinearity
Authors:
Mikhail Lapine,
Ilya V. Shadrivov,
David A. Powell,
Yuri S. Kivshar
Abstract:
Within a decade of fruitful developments, metamaterials became a prominent area of research, bridging theoretical and applied electrodynamics, electrical engineering and material science. Being man-made structures, metamaterials offer a particularly useful playground to develop novel interdisciplinary concepts. Here we demonstrate a novel principle in metamaterial assembly which integrates electro…
▽ More
Within a decade of fruitful developments, metamaterials became a prominent area of research, bridging theoretical and applied electrodynamics, electrical engineering and material science. Being man-made structures, metamaterials offer a particularly useful playground to develop novel interdisciplinary concepts. Here we demonstrate a novel principle in metamaterial assembly which integrates electromagnetic, mechanical, and thermal responses within their elements. Through these mechanisms, the conformation of the meta-molecules changes, providing a dual mechanism for nonlinearity and offering nonlinear chirality. Our proposal opens a wide road towards further developments of nonlinear metamaterials and photonic structures, adding extra flexibility to their design and control.
△ Less
Submitted 25 August, 2011;
originally announced August 2011.
-
Magnetoelastic nonlinear metamaterials
Authors:
Mikhail Lapine,
Ilya V. Shadrivov,
David A. Powell,
Yuri S. Kivshar
Abstract:
We introduce the concept of magnetoelastic metamaterials with electromagnetic properties depending on elastic deformation. We predict a strong nonlinear and bistable response of such metamaterials caused by their structural resha** in response to the applied electromagnetic field. In addition, we demonstrate experimentally the feasibility of the predicted effect.
We introduce the concept of magnetoelastic metamaterials with electromagnetic properties depending on elastic deformation. We predict a strong nonlinear and bistable response of such metamaterials caused by their structural resha** in response to the applied electromagnetic field. In addition, we demonstrate experimentally the feasibility of the predicted effect.
△ Less
Submitted 4 June, 2011;
originally announced June 2011.
-
Near-field interaction of twisted split-ring resonators
Authors:
David A. Powell,
Kirsty Hannam,
Ilya V. Shadrivov,
Yuri S. Kivshar
Abstract:
We present experimental, numerical and analytical results for the study of near-field interaction of twisted split-ring resonators, the basic elements of the so-called stereometamaterials. In contrast to previous results, we observe a crossing point in the dispersion curves where the symmetric and antisymmetric modes become degenerate. We introduce a model to describe the interplay between magneti…
▽ More
We present experimental, numerical and analytical results for the study of near-field interaction of twisted split-ring resonators, the basic elements of the so-called stereometamaterials. In contrast to previous results, we observe a crossing point in the dispersion curves where the symmetric and antisymmetric modes become degenerate. We introduce a model to describe the interplay between magnetic and electric near-field interactions and demonstrate how this model describes the crossing of the dispersion curves, initially considering lossless identical resonators. Finally, we apply the theory of Morse critical points to demonstrate the competition between losses and fabrication errors in determining whether or not symmetric and antisymmetric modes cross.
△ Less
Submitted 28 January, 2011;
originally announced January 2011.
-
Electromagnetic wave analogue of electronic diode
Authors:
Ilya V. Shadrivov,
David A. Powell,
Yuri S. Kivshar,
Vassili A. Fedotov,
Nikolay I. Zheludev
Abstract:
An electronic diode is a nonlinear semiconductor circuit component that allows conduction of electrical current in one direction only. A component with similar functionality for electromagnetic waves, an electromagnetic isolator, is based on the Faraday effect of the polarization state rotation and is also a key component of optical and microwave systems. Here we demonstrate a chiral electromagnet…
▽ More
An electronic diode is a nonlinear semiconductor circuit component that allows conduction of electrical current in one direction only. A component with similar functionality for electromagnetic waves, an electromagnetic isolator, is based on the Faraday effect of the polarization state rotation and is also a key component of optical and microwave systems. Here we demonstrate a chiral electromagnetic diode, which is a direct analogue of an electronic diode: its functionality is underpinned by an extraordinary strong nonlinear wave propagation effect in the same way as electronic diode function is provided by a nonlinear current characteristic of a semiconductor junction. The effect exploited in this new electromagnetic diode is an intensity-dependent polarization change in an artificial chiral metamolecule. This microwave effect exceeds a similar optical effect previously observed in natural crystals by more than 12 orders of magnitude and a direction-dependent transmission that differing by a factor of 65.
△ Less
Submitted 27 October, 2010;
originally announced October 2010.
-
Rotational tuning of interaction in metamaterials
Authors:
Kirsty Hannam,
David A. Powell,
Ilya V. Shadrivov,
Yuri S. Kivshar
Abstract:
We experimentally observe the tuning of metamaterials through the relative rotation of the elements about their common axis. In contrast to previous results we observe a crossing of resonances, where the symmetric and anti-symmetric modes become degenerate. We associate this effect with an interplay between the magnetic and electric near-field interactions and verify this by calculations based on…
▽ More
We experimentally observe the tuning of metamaterials through the relative rotation of the elements about their common axis. In contrast to previous results we observe a crossing of resonances, where the symmetric and anti-symmetric modes become degenerate. We associate this effect with an interplay between the magnetic and electric near-field interactions and verify this by calculations based on the interaction energy between resonators.
△ Less
Submitted 20 September, 2010;
originally announced September 2010.
-
Substrate-induced bianisotropy in metamaterials
Authors:
David A. Powell,
Yuri S. Kivshar
Abstract:
We demonstrate that the presence of a supporting substrate can break the symmetry of a metamaterial structure, changing the symmetry of its effective parameters, and giving rise to bianisotropy. This indicates that magneto-electric coupling will occur in all metamaterials fabricated on a substrate, including those with symmetric designs.
We demonstrate that the presence of a supporting substrate can break the symmetry of a metamaterial structure, changing the symmetry of its effective parameters, and giving rise to bianisotropy. This indicates that magneto-electric coupling will occur in all metamaterials fabricated on a substrate, including those with symmetric designs.
△ Less
Submitted 6 June, 2010;
originally announced June 2010.
-
Tunable fishnet metamaterials infiltrated by liquid crystals
Authors:
Alexander Minovich,
Dragomir N. Neshev,
David A. Powell,
Ilya V. Shadrivov,
Yuri S. Kivshar
Abstract:
We analyze numerically the optical response and effective macroscopic parameters of fishnet metamaterials infiltrated with a nematic liquid crystal. We show that even a small amount of liquid crystal can provide tuning of the structures due to reorientation of the liquid crystal director. This enables switchable optical metamaterials, where the refractive index can be switched from positive to neg…
▽ More
We analyze numerically the optical response and effective macroscopic parameters of fishnet metamaterials infiltrated with a nematic liquid crystal. We show that even a small amount of liquid crystal can provide tuning of the structures due to reorientation of the liquid crystal director. This enables switchable optical metamaterials, where the refractive index can be switched from positive to negative by an external field. This tuning is primarily determined by the shift of the cut-off wavelength of the holes, with only a small influence due to the change in plasmon dispersion
△ Less
Submitted 6 April, 2010;
originally announced April 2010.
-
Metamaterial tuning by manipulation of near-field interaction
Authors:
David A. Powell,
Mikhail Lapine,
Maxim Gorkunov,
Ilya V. Shadrivov,
Yuri S. Kivshar
Abstract:
We analyze the near-field interaction between the resonant sub-wavelength elements of a metamaterial, and present a method to calculate the electric and magnetic interaction coefficients. We show that by adjusting the relative configuration of the neighboring split ring resonators it becomes possible to manipulate this near-field interaction, and thus tune the response of metamaterials. We use the…
▽ More
We analyze the near-field interaction between the resonant sub-wavelength elements of a metamaterial, and present a method to calculate the electric and magnetic interaction coefficients. We show that by adjusting the relative configuration of the neighboring split ring resonators it becomes possible to manipulate this near-field interaction, and thus tune the response of metamaterials. We use the results of this analysis to explain the experimentally observed tuning of microwave metamaterials.
△ Less
Submitted 27 September, 2010; v1 submitted 6 December, 2009;
originally announced December 2009.
-
Structural tunability in metamaterials
Authors:
Mikhail Lapine,
David Powell,
Maxim Gorkunov,
Ilya Shadrivov,
Ricardo Marqués,
Yuri Kivshar
Abstract:
We propose a novel approach for efficient tuning of the transmission characteristics of metamaterials through a continuous adjustment of the lattice structure, and confirm it experimentally in the microwave range. The concept is rather general and applicable to various metamaterials as long as the effective medium description is valid. The demonstrated continuous tuning of metamaterial response…
▽ More
We propose a novel approach for efficient tuning of the transmission characteristics of metamaterials through a continuous adjustment of the lattice structure, and confirm it experimentally in the microwave range. The concept is rather general and applicable to various metamaterials as long as the effective medium description is valid. The demonstrated continuous tuning of metamaterial response is highly desirable for a number of emerging applications of metamaterials including sensors, filters, switches, realizable in a wide frequency range.
△ Less
Submitted 14 July, 2009;
originally announced July 2009.
-
Nonlinear Electric Metamaterials
Authors:
David A. Powell,
Ilya V. Shadrivov,
Yuri S. Kivshar
Abstract:
We propose and design a new type of nonlinear metamaterials exhibiting a resonant electric response at microwave frequencies. By introducing a varactor diode as a nonlinear element within each resonator, we are able to shift the frequency of the electric mode stop-band by changing the incident power, without affecting the magnetic response. These elements could be combined with the previously de…
▽ More
We propose and design a new type of nonlinear metamaterials exhibiting a resonant electric response at microwave frequencies. By introducing a varactor diode as a nonlinear element within each resonator, we are able to shift the frequency of the electric mode stop-band by changing the incident power, without affecting the magnetic response. These elements could be combined with the previously developed nonlinear magnetic metamaterials in order to create negative index media with control over both electric and magnetic nonlinearities.
△ Less
Submitted 24 May, 2009;
originally announced May 2009.
-
Nonlinear Control of Tunneling Through an Epsilon-Near-Zero Channel
Authors:
David A. Powell,
Andrea Alu,
Brian Edwards,
Ashkan Vakil,
Yuri S. Kivshar,
Nader Engheta
Abstract:
The epsilon-near-zero (ENZ) tunneling phenomenon allows full transmission of waves through a narrow channel even in the presence of a strong geometric mismatch. Here we experimentally demonstrate nonlinear control of the ENZ tunneling by an external field, as well as self-modulation of the transmission resonance due to the incident wave. Using a waveguide section near cut-off frequency as the EN…
▽ More
The epsilon-near-zero (ENZ) tunneling phenomenon allows full transmission of waves through a narrow channel even in the presence of a strong geometric mismatch. Here we experimentally demonstrate nonlinear control of the ENZ tunneling by an external field, as well as self-modulation of the transmission resonance due to the incident wave. Using a waveguide section near cut-off frequency as the ENZ system, we introduce a diode with tunable and nonlinear capacitance to demonstrate both of these effects. Our results confirm earlier theoretical ideas on using an ENZ channel for dielectric sensing, and their potential applications for tunable slow-light structures.
△ Less
Submitted 13 May, 2009; v1 submitted 29 January, 2009;
originally announced January 2009.
-
Dispersion extraction with near-field measurements in periodic waveguides
Authors:
Andrey A. Sukhorukov,
Sangwoo Ha,
Ilya V. Shadrivov,
David A. Powell,
Yuri S. Kivshar
Abstract:
We formulate and demonstrate experimentally the high-resolution spectral method based on Bloch-wave symmetry properties for extracting mode dispersion in periodic waveguides from measurements of near-field profiles. We characterize both the propagating and evanescent modes, and also determine the amplitudes of forward and backward waves in different waveguide configurations, with the estimated a…
▽ More
We formulate and demonstrate experimentally the high-resolution spectral method based on Bloch-wave symmetry properties for extracting mode dispersion in periodic waveguides from measurements of near-field profiles. We characterize both the propagating and evanescent modes, and also determine the amplitudes of forward and backward waves in different waveguide configurations, with the estimated accuracy of several percent or less. Whereas the commonly employed spatial Fourier-transform (SFT) analysis provides the wavenumber resolution which is limited by the inverse length of the waveguide, we achieve precise dispersion extraction even for compact photonic structures.
△ Less
Submitted 21 January, 2009;
originally announced January 2009.
-
Asymmetric parametric amplification in nonlinear left-handed transmission lines
Authors:
David A. Powell,
Ilya V. Shadrivov,
Yuri S. Kivshar
Abstract:
We study parametric amplification in nonlinear left-handed transmission lines, which serve as model systems for nonlinear negative index metamaterials. We experimentally demonstrate amplification of a weak pump signal in three regimes: with the signal in the left-handed band, with the signal in the stop band, and with the signal at a defect frequency. In particular, we demonstrate the amplificat…
▽ More
We study parametric amplification in nonlinear left-handed transmission lines, which serve as model systems for nonlinear negative index metamaterials. We experimentally demonstrate amplification of a weak pump signal in three regimes: with the signal in the left-handed band, with the signal in the stop band, and with the signal at a defect frequency. In particular, we demonstrate the amplification of the incident wave by up to 15dB in the left-handed regime.
△ Less
Submitted 22 January, 2009; v1 submitted 15 December, 2008;
originally announced December 2008.
-
Cut-wire-pair structures as two-dimensional magnetic metamaterials
Authors:
David A. Powell,
Ilya V. Shadrivov,
Yuri S. Kivshar
Abstract:
We study numerically and experimentally magnetic metamaterials based on cut-wire pairs instead of split-ring resonators. The cut-wire pair planar structure is extended in order to create a truly two-dimensional metamaterial suitable for scaling to optical frequencies. We fabricate the cut-wire metamaterial operating at microwave frequencies with lattice spacing around 10% of the free-space wavel…
▽ More
We study numerically and experimentally magnetic metamaterials based on cut-wire pairs instead of split-ring resonators. The cut-wire pair planar structure is extended in order to create a truly two-dimensional metamaterial suitable for scaling to optical frequencies. We fabricate the cut-wire metamaterial operating at microwave frequencies with lattice spacing around 10% of the free-space wavelength, and find good agreement with direct numerical simulations. Unlike the structures based on split-ring resonators, the nearest-neighbor coupling in cut-wire pairs can result in a magnetic stop-band with propagation in the transverse direction.
△ Less
Submitted 11 September, 2008; v1 submitted 10 August, 2008;
originally announced August 2008.
-
Multistability in nonlinear left-handed transmission lines
Authors:
David A. Powell,
Ilya V. Shadrivov,
Yuri S. Kivshar
Abstract:
Employing a nonlinear left-handed transmission line as a model system, we demonstrate experimentally the multi-stability phenomena predicted theoretically for microstructured left-handed metamaterials with a nonlinear response. We show that the bistability is associated with the period doubling which at higher power may result in chaotic dynamics of the transmission line.
Employing a nonlinear left-handed transmission line as a model system, we demonstrate experimentally the multi-stability phenomena predicted theoretically for microstructured left-handed metamaterials with a nonlinear response. We show that the bistability is associated with the period doubling which at higher power may result in chaotic dynamics of the transmission line.
△ Less
Submitted 30 April, 2008;
originally announced May 2008.