-
Bright Spatially Coherent Beam from Carbon Nanotube Fiber Field Emission Cathode
Authors:
Taha Y. Posos,
Sergey V. Baryshev
Abstract:
Large area carbon nanotube (CNT) cathodes made from yarns, films or fibers have long been promising as next generation electron sources for high power radio frequency (rf) and microwave vacuum electronic devices. However, experimental evidence have been pointing out spatial incoherence of the electron beam produced by such cathodes that, in turn, impeded the progress toward high brightness CNT ele…
▽ More
Large area carbon nanotube (CNT) cathodes made from yarns, films or fibers have long been promising as next generation electron sources for high power radio frequency (rf) and microwave vacuum electronic devices. However, experimental evidence have been pointing out spatial incoherence of the electron beam produced by such cathodes that, in turn, impeded the progress toward high brightness CNT electron sources and their practical applications. Indeed, typically large area CNT fibers, films or textiles emit stochastically across their physical surface at large emission angles and with large transverse spread, meaning large emittance and hence low brightness. In this work, using high resolution field emission microscopy, we demonstrate that conventional electroplating of hair-thick CNT fibers followed by a femtosecond laser cutting, producing emitter surface, solves the described incoherent emission issues extremely well. Strikingly, it was observed that the entire (within the error margin) cathode surface of a radius of approximately $75\,μ\text{m}$ emitted uniformly (with no hot spots) in the direction of the applied electric field. The normalized emittance on the fiber surface was estimated of 52 nm with brightness of $>$$10^{15}\frac{\text{A}}{\text{m}^2\text{rad}^2}$ (or $>$$10^7$ A m$^{-2}$sr$^{-1}$V$^{-1}$) estimated for pulsed mode operation.
△ Less
Submitted 16 January, 2023;
originally announced January 2023.
-
Evaluating Effects of Geometry and Material Composition on Production of Transversely Shaped Beams from Diamond Field Emission Array Cathodes
Authors:
Mitchell E. Schneider,
Heather Andrews,
Sergey V. Baryshev,
Emily Jevarjian,
Dongsung Kim,
Kimberley Nichols,
Taha Y. Posos,
Michael Pettes,
John Power,
Jiahang Shao,
Evgenya I. Simakov
Abstract:
Field emission cathodes (FECs) are attractive for the next generation of injectors due to their ability to provide high current density bright beams with low intrinsic emittance. One application of FECs worthy of special attention is to provide transversely shaped electron beams for emittance exchange that translates a transverse electron beam pattern into a longitudinal pattern. FECs can be fabri…
▽ More
Field emission cathodes (FECs) are attractive for the next generation of injectors due to their ability to provide high current density bright beams with low intrinsic emittance. One application of FECs worthy of special attention is to provide transversely shaped electron beams for emittance exchange that translates a transverse electron beam pattern into a longitudinal pattern. FECs can be fabricated in a desired pattern and produce transversely shaped beams without the need for complex masking or laser schemes. However, reliable and consistent production of transversely shaped beams is affected by material properties of the FEC. This paper reports the results of testing two diamond field emitter array (DFEA) FECs with the same lithography pattern and emitter geometry but different material and tip characteristics. Although both cathodes were able to sustain gradients of 44 MV/m and produce maximum output integral charge of 0.5 nC per radiofrequency (rf) pulse, their emission patterns were quite different. One cathode did not produce a patterned beam while the other one did. Differences in field emission characteristics and patterned beam production were explained by the differences in the tip geometry and the cathode material properties. The main practical takeaway was found to be that the tip sharpness was not a prerequisite for good patterned beam production. Instead, other material characteristics, such as the ballast resistance, determined cathode performance.
△ Less
Submitted 26 September, 2022;
originally announced September 2022.
-
Confirmation of Transit-Time Limited Field Emission in Advanced Carbon Materials with Fast Pattern Recognition Algorithm
Authors:
Taha Y. Posos,
Oksana Chubenko,
Sergey V. Baryshev
Abstract:
An accurate estimation of the experimental field-emission area remains a great challenge in vacuum electronics. The lack of convenient means, which can be used to measure this parameter, creates a critical knowledge gap, making it impossible to compare theory to experiment. In this work, a fast pattern recognition algorithm was developed to complement a field emission microscopy, together creating…
▽ More
An accurate estimation of the experimental field-emission area remains a great challenge in vacuum electronics. The lack of convenient means, which can be used to measure this parameter, creates a critical knowledge gap, making it impossible to compare theory to experiment. In this work, a fast pattern recognition algorithm was developed to complement a field emission microscopy, together creating a methodology to obtain and analyze electron emission micrographs in order to quantitatively estimate the field emission area. The algorithm is easy to use and made available to the community as a freeware, and therefore is described in detail. Three examples of dc emission are given to demonstrate the applicability of this algorithm to determine spatial distribution of emitters, calculate emission area, and finally obtain experimental current density as a function of the electric field for two technologically important field emitter materials, namely an ultrananocrystalline diamond film and a carbon nanotube fiber. Unambiguous results, demonstrating the current density saturation and once again proving that conventional Fowler-Nordheim theory, its Murphy-Good extension, and the vacuum space-charge effect fail to describe such behaviour, are presented and discussed. We also show that the transit-time limited charge resupply captures the current density saturation behaviour observed in experiments and provides good quantitative agreement with experimental data for all cases studied in this work.
△ Less
Submitted 17 August, 2021;
originally announced August 2021.
-
Ampere-class Bright Field Emission Cathode Operated at 100 MV/m
Authors:
Mitchell Schneider,
Emily Jevarjian,
Tanvi Nikhar,
Taha Y. Posos,
Wanming Liu,
Jiahang Shao,
Sergey V. Baryshev
Abstract:
High current bright sources are needed to power the next generation of compact rf and microwave systems. A major requirement is that such a source could be sustainably operated at high frequencies, well above 1 GHz, and high gradients, well above 100 MV/m. Field emission sources offer simplicity and scalability in a high frequency era of the injector design, but the output rf cycle charge and high…
▽ More
High current bright sources are needed to power the next generation of compact rf and microwave systems. A major requirement is that such a source could be sustainably operated at high frequencies, well above 1 GHz, and high gradients, well above 100 MV/m. Field emission sources offer simplicity and scalability in a high frequency era of the injector design, but the output rf cycle charge and high gradient operation remain a great and largely unaddressed challenge. Here, a field emission cathode based on ultra-nano-crystalline diamond or UNCD, an efficient planar field emission material, was tested at 100 MV/m in an L-band injector. A very high charge of 38 pC per rf cycle (300 nC per rf pulse corresponding to rf pulse current of 120 mA) was demonstrated. This operating condition revealed a space charge dominated emission from the cathode and revealed a condition under which the 1D Child Langmuir limit was surpassed. Finally, a beam brightness of $\sim 10^{14}-10^{15}$ A/m$^2\times$rad$^2$ was estimated.
△ Less
Submitted 29 January, 2021;
originally announced February 2021.
-
Fast Pattern Recognition for Electron Emission Micrograph Analysis
Authors:
Taha Y. Posos,
Oksana Chubenko,
Sergey V. Baryshev
Abstract:
In this work, a pattern recognition algorithm was developed to process and analyze electron emission micrographs. Various examples of dc and rf emission are given that demonstrate this algorithm applicability to determine emitters spatial location and distribution and calculate apparent emission area. The algorithm is fast and only takes $\sim$10 seconds to process and analyze one micrograph using…
▽ More
In this work, a pattern recognition algorithm was developed to process and analyze electron emission micrographs. Various examples of dc and rf emission are given that demonstrate this algorithm applicability to determine emitters spatial location and distribution and calculate apparent emission area. The algorithm is fast and only takes $\sim$10 seconds to process and analyze one micrograph using resources of an Intel Core i5.
△ Less
Submitted 7 December, 2020;
originally announced December 2020.
-
Field emission microscopy of carbon nanotube fibers: evaluating and interpreting spatial emission
Authors:
Taha Y. Posos,
Steven B. Fairchild,
Jeongho Park,
Sergey V. Baryshev
Abstract:
In this work, we quantify field emission properties of cathodes made from carbon nanotube (CNT) fibers. The cathodes were arranged in different configurations to determine the effect of cathode geometry on the emission properties. Various geometries were investigated including: 1) flat cut fiber tip, 2) folded fiber, 3) looped fiber and 4) and fibers wound around a cylinder. We employ a custom fie…
▽ More
In this work, we quantify field emission properties of cathodes made from carbon nanotube (CNT) fibers. The cathodes were arranged in different configurations to determine the effect of cathode geometry on the emission properties. Various geometries were investigated including: 1) flat cut fiber tip, 2) folded fiber, 3) looped fiber and 4) and fibers wound around a cylinder. We employ a custom field emission microscope to quantify I-V characteristics in combination with laterally-resolved field-dependent electron emission area. Additionally we look at the very early emission stages, first when a CNT fiber is turned on for the first time which is then followed by multiple ramp-up/down. Upon the first turn on, all fibers demonstrated limited and discrete emission area. During ram** runs, all CNT fibers underwent multiple (minor and/or major) breakdowns which improved emission properties in that turn-on field decreased, field enhancement factor and emission area both increased. It is proposed that breakdowns are responsible for removing initially undesirable emission sites caused by stray fibers higher than average. This initial breakdown process gives way to a larger emission area that is created when the CNT fiber sub components unfold and align with the electric field. Our results form the basis for careful evaluation of CNT fiber cathodes for dc or low frequency pulsed power systems in which large uniform area emission is required, or for narrow beam high frequency applications in which high brightness is a must.
△ Less
Submitted 27 November, 2019;
originally announced November 2019.
