Showing 1–34 of 34 results for author: Picano, F

Assessment of heat transfer and Mach number effects on high-speed turbulent boundary layers

Authors: Michele Cogo, Umberto Baù, Mauro Chinappi, Matteo Bernardini, Francesco Picano

Abstract: High-speed vehicles experience a highly challenging environment in which the free-stream Mach number and surface temperature greatly influence aerodynamic drag and heat transfer. The interplay of these two parameters strongly affects the near-wall dynamics of high-speed turbulent boundary layers in a non-trivial way, breaking similarity arguments on velocity and temperature fields, typically deriv… ▽ More High-speed vehicles experience a highly challenging environment in which the free-stream Mach number and surface temperature greatly influence aerodynamic drag and heat transfer. The interplay of these two parameters strongly affects the near-wall dynamics of high-speed turbulent boundary layers in a non-trivial way, breaking similarity arguments on velocity and temperature fields, typically derived for adiabatic cases. In this work, we present direct numerical simulations of flat-plate zero-pressure-gradient turbulent boundary layers spanning three free-stream Mach numbers [2,4,6] and four wall temperature conditions (from adiabatic to very cold walls), emphasising the choice of the diabatic parameter $\mathitΘ$ (Zhang, Bi, Hussain & She, J. Fluid Mech., vol. 739, pp. 392-420) to recover a similar flow organisation at different Mach numbers. We link qualitative observations on flow patterns to first- and second-order statistics to explain the strong decoupling of temperature-velocity fluctuations that occurs at reduced wall temperatures and high Mach numbers. For these cases, we find that the mean temperature gradient in the near-wall region can reach such a strong intensity that it promotes the formation of a secondary peak of thermal production in the viscous sublayer, which is in direct contrast with the monotonic behaviour of adiabatic profiles. We propose different physical mechanisms induced by wall-cooling and compressibility that result in apparently similar flow features, such as a higher peak in the streamwise velocity turbulence intensity, and distinct ones, such as the separation of turbulent scales. △ Less

Submitted 2 May, 2023; originally announced May 2023.

Journal ref: Journal of Fluid Mechanics. 2023;974:A10

Sha** active matter from crystalline solids to active turbulence

Authors: Qianhong Yang, Maoqiang Jiang, Francesco Picano, Lailai Zhu

Abstract: Active matter drives its constituent agents to move autonomously by harnessing free energy, leading to diverse emergent states with relevance to both biological processes and inanimate functionalities. Achieving maximum reconfigurability of active materials with minimal control remains a desirable yet challenging goal. Here, we employ large-scale, agent-resolved simulations to demonstrate that mod… ▽ More Active matter drives its constituent agents to move autonomously by harnessing free energy, leading to diverse emergent states with relevance to both biological processes and inanimate functionalities. Achieving maximum reconfigurability of active materials with minimal control remains a desirable yet challenging goal. Here, we employ large-scale, agent-resolved simulations to demonstrate that modulating the activity of a wet phoretic medium alone can govern its solid-liquid-gas phase transitions and, subsequently, laminar-turbulent transitions in fluid phases, thereby sha** its emergent pattern. These two progressively emerging transitions, hitherto unreported, bring us closer to perceiving the parallels between active matter and traditional matter. Our work reproduces and reconciles seemingly conflicting experimental observations on chemically active systems, presenting a unified landscape of phoretic collective dynamics. These findings enhance the understanding of long-range, many-body interactions among phoretic agents, offer new insights into their non-equilibrium collective behaviors, and provide potential guidelines for designing reconfigurable materials. △ Less

Submitted 3 March, 2024; v1 submitted 4 April, 2023; originally announced April 2023.

Asymmetric invasion in anisotropic porous media

Authors: Dario Maggiolo, Francesco Picano, Federico Toschi

Abstract: We report and discuss, by means of pore-scale numerical simulations, the possibility of achieving a directional-dependent two-phase flow behaviour during the process of invasion of a viscous fluid into anisotropic porous media with controlled design. By customising the pore-scale morphology and heterogeneities with the adoption of anisotropic triangular pillars distributed with quenched disorder,… ▽ More We report and discuss, by means of pore-scale numerical simulations, the possibility of achieving a directional-dependent two-phase flow behaviour during the process of invasion of a viscous fluid into anisotropic porous media with controlled design. By customising the pore-scale morphology and heterogeneities with the adoption of anisotropic triangular pillars distributed with quenched disorder, we observe a substantially different invasion dynamics according to the direction of fluid injection relative to the medium orientation, that is depending if the triangular pillars have their apex oriented (flow-aligned) or opposed (flow-opposing) to the main flow direction. Three flow regimes can be observed: (i) for low values of the ratio between the macroscopic pressure drop and the characteristic pore-scale capillary threshold, i.e. for p0/pc < 1, the fluid invasion dynamics is strongly impeded and the viscous fluid is unable to reach the outlet of the medium, irrespective of the direction of injection; (ii) for intermediate values, 1 < p0/pc < 2, the viscous fluid reaches the outlet only when the triangular pillars are flow-opposing oriented; (iii) for larger values, i.e for p0/pc > 2, the outlet is again reached irrespective of the direction of injection. The porous medium anisotropy induces a lower effective resistance when the pillars are flow-opposing oriented, suppressing front roughening and capillary fingering. We thus argue that the invasion process occurs as long as the pressure drop is larger then the macroscopic capillary pressure determined by the front roughness, which in the case of flow-opposing pillars is halved. △ Less

Submitted 23 July, 2021; originally announced July 2021.

Revisiting d2-law for the evaporation of dilute droplets

Authors: Federico Dalla Barba, Jietuo Wang, Francesco Picano

Abstract: In a wide range of applications, the estimate of droplet evaporation time is based on the classical d2-law, which, assuming a fast mixing and fixed environmental properties, states that the droplet surface decreases linearly with time at a determined rate. However, in many cases the predicted evaporation rate is overestimated. In this Letter, we propose a revision of the d2-law capable to accurate… ▽ More In a wide range of applications, the estimate of droplet evaporation time is based on the classical d2-law, which, assuming a fast mixing and fixed environmental properties, states that the droplet surface decreases linearly with time at a determined rate. However, in many cases the predicted evaporation rate is overestimated. In this Letter, we propose a revision of the d2-law capable to accurately determine droplet evaporation rate in dilute conditions by a proper estimate of the asymptotic droplet properties. Besides a discussion of the main assumptions, we tested the proposed model against data from direct numerical simulations finding an excellent agreement for predicted droplet evaporation time in dilute turbulent jet-sprays. △ Less

Submitted 14 April, 2021; originally announced April 2021.

Near-wall turbulence modulation by small inertial particles

Authors: Pedro Costa, Luca Brandt, Francesco Picano

Abstract: We use interface-resolved simulations to study near-wall turbulence modulation by small inertial particles, much denser than the fluid, in dilute/semi-dilute conditions. We considered three bulk solid mass fractions, $Ψ=0.34\%$, $3.37\%$ and $33.7\%$, with only the latter two showing turbulence modulation. The increase of the drag is strong at $Ψ=3.37\%$, but mild in the densest case. Actually, tw… ▽ More We use interface-resolved simulations to study near-wall turbulence modulation by small inertial particles, much denser than the fluid, in dilute/semi-dilute conditions. We considered three bulk solid mass fractions, $Ψ=0.34\%$, $3.37\%$ and $33.7\%$, with only the latter two showing turbulence modulation. The increase of the drag is strong at $Ψ=3.37\%$, but mild in the densest case. Actually, two distinct regimes of turbulence modulation emerge: for smaller mass fractions, the turbulence statistics are weakly affected and the near-wall particle accumulation increases the drag so the flow appears as a single phase flow at slightly higher Reynolds number. Conversely, at higher mass fractions, the particles modulate the turbulent dynamics over the entire flow, and the interphase coupling becomes more complex. In this case, fluid Reynolds stresses are attenuated, but the inertial particle dynamics increases the drag via correlated velocity fluctuations leading to an overall drag increase. Hence, we conclude that, although particles at high mass fractions reduce the fluid turbulent drag, the solid phase inertial dynamics may still increase the overall drag. However, inspection of the streamwise momentum budget in the two-way coupling limit of vanishing volume fraction, but finite mass fraction, indicates that this trend could reverse at even higher particle load. △ Less

Submitted 16 July, 2021; v1 submitted 23 February, 2021; originally announced February 2021.

Journal ref: J. Fluid Mech. 922 (2021) A9

Suspensions of deformable particles in Poiseuille flows at finite inertia

Authors: Luigi Filippo Chiara, Marco Edoardo Rosti, Francesco Picano, Luca Brandt

Abstract: We analyze a suspension of deformable particles in a pressure-driven flow. The suspension is composed of neutrally buoyant initially spherical particles and a Newtonian carrier fluid, and the flow is solved by means of direct numerical simulations, using a fully Eulerian method based on a one-continuum formulation. The solid phase is modeled with an incompressible viscous hyperelastic constitutive… ▽ More We analyze a suspension of deformable particles in a pressure-driven flow. The suspension is composed of neutrally buoyant initially spherical particles and a Newtonian carrier fluid, and the flow is solved by means of direct numerical simulations, using a fully Eulerian method based on a one-continuum formulation. The solid phase is modeled with an incompressible viscous hyperelastic constitutive relation, and the flow is characterized by three main dimensionless parameters, namely the solid volume fraction, the Reynolds and capillary numbers. The dependency of the effective viscosity on these three quantities is investigated to study the inertial effects on a suspension of deformable particles. It can be observed that the suspension has a shear-thinning behavior, and the reduction in effective viscosity for high shear rates is emphasized in denser configurations. The separate analysis of the Reynolds and capillary numbers reveal that the effective viscosity depends more on the capillary than on the Reynolds number. In addition, our simulations exhibit a consistent tendency for deformable particles to move towards the center of the channel, where the shear rate is low. This phenomenon is particularly marked for very dilute suspensions, where a whole region near the wall is empty of particles. Furthermore, when the volume fraction is increased this near-wall region is gradually occupied, because of higher mutual particle interactions. Deformability also plays an important role in the process. Indeed, at high capillary numbers, particles are more sensitive to shear rate variations and can modify their shape more easily to accommodate a greater number of particles in the central region of the channel. △ Less

Submitted 20 October, 2020; originally announced October 2020.

Direct numerical simulation of an evaporating turbulent diluted jet-spray at moderate Reynolds number

Authors: Jietuo Wang, Federico Dalla Barba, Francesco Picano

Abstract: The evaporation of dispersed, liquid droplets in jet-sprays occurs in several industrial applications and in natural phenomena. Despite the relevance of the problem, a satisfactory comprehension of the mechanisms involved has not still be achieved because of the wide range of turbulent scales and the huge number of droplets involved. In this context, we address a DNS of a turbulent jet spray at re… ▽ More The evaporation of dispersed, liquid droplets in jet-sprays occurs in several industrial applications and in natural phenomena. Despite the relevance of the problem, a satisfactory comprehension of the mechanisms involved has not still be achieved because of the wide range of turbulent scales and the huge number of droplets involved. In this context, we address a DNS of a turbulent jet spray at relatively high Reynolds number, i.e. Re=10,000. We focus on the effect of the jet Re on the evaporation process and the preferential segregation of droplets, comparing the outcomes also with a DNS at lower Reynolds number, Re = 6,000, in corresponding conditions. The problem is addressed in the hybrid Eulerian-Lagrangian framework employing the point-droplet approximation. Detailed statistical analysis on both the gas and dispersed phases are presented. We found that the droplet vaporization length grows as the bulk Re is increased from Re = 6,000 to Re = 10,000 kee** other conditions fixed. We attribute this result to the complex interaction between the inertia of the droplets and the turbulent gaseous phase dynamics. In particular, at higher Re, the slower droplet mass transfer is not able to comply with the faster turbulent fluctuations of the mixing layer that tend to fasten the process. We also found an intense droplet clustering which is originated by entrainment of dry air in the mixing layer and intensified by the small-scale clustering mechanism in the far-field region. We will show how clustering creates a strongly heterogeneous droplet Lagrangian evolution. All these aspects contribute to the Re dependence of the overall droplet evaporation rate. Finally, we discuss the accuracy of the d-square law, often used in spray modeling, for present cases. We found that using this law based on environmental conditions the droplet evaporation rate is overestimated. △ Less

Submitted 15 October, 2020; originally announced October 2020.

Comments: 18 pages, 13 figures

Journal ref: Int. J. Multiph. Flow. 137(2021) 103567

Regimes of heat transfer in particle suspensions

Authors: Ali Yousefi, Mehdi Niazi Ardekani, Francesco Picano, Luca Brandt

Abstract: We present results of interface-resolved simulations of heat transfer in suspensions of finite-size neutrally-buoyant spherical particles for solid volume fractions up to 35% and bulk Reynolds numbers from 500 to 5600. An Immersed Boundary-Volume of Fluid method is used to solve the energy equation in the fluid and solid phase. We relate the heat transfer to the regimes of particle motion previous… ▽ More We present results of interface-resolved simulations of heat transfer in suspensions of finite-size neutrally-buoyant spherical particles for solid volume fractions up to 35% and bulk Reynolds numbers from 500 to 5600. An Immersed Boundary-Volume of Fluid method is used to solve the energy equation in the fluid and solid phase. We relate the heat transfer to the regimes of particle motion previously identified, i.e. a viscous regime at low volume fractions and low Reynolds number, particle-laden turbulence at high Reynolds and moderate volume fraction and particulate regime at high volume fractions. We show that in the viscous dominated regime, the heat transfer is mainly due to thermal diffusion with enhancement due to the particle-induced fluctuations. In the turbulent-like regime, we observe the largest enhancement of the global heat transfer, dominated by the turbulent heat flux. In the particulate shear-thickening regime, however, the heat transfer enhancement decreases as mixing is quenched by the particle migration towards the channel core. As a result, a compact loosely-packed core region forms and the contribution of thermal diffusion to the total heat transfer becomes significant once again. The global heat transfer becomes, in these flows at volume fractions larger than 25%, lower than in single-phase turbulence. △ Less

Submitted 14 July, 2020; originally announced July 2020.

An interface capturing method for liquid-gas flows at low-Mach number

Authors: Federico Dalla Barba, Nicolò Scapin, Marco E. Rosti, Francesco Picano, Luca Brandt

Abstract: Multiphase, compressible and viscous flows are of crucial importance in a wide range of scientific and engineering problems. Despite the large effort paid in the last decades to develop accurate and efficient numerical techniques to address this kind of problems, current models need to be further improved to address realistic applications. In this context, we propose a numerical approach to the si… ▽ More Multiphase, compressible and viscous flows are of crucial importance in a wide range of scientific and engineering problems. Despite the large effort paid in the last decades to develop accurate and efficient numerical techniques to address this kind of problems, current models need to be further improved to address realistic applications. In this context, we propose a numerical approach to the simulation of multiphase, viscous flows where a compressible and an incompressible phase interact in the low-Mach number regime. In this frame, acoustics is neglected but large density variations of the compressible phase can be accounted for as well as heat transfer, convection and diffusion processes. The problem is addressed in a fully Eulerian framework exploiting a low-Mach number asymptotic expansion of the Navier-Stokes equations. A Volume of Fluid approach (VOF) is used to capture the liquid-gas interface, built on top of a massive parallel solver, second order accurate both in time and space. The second-order-pressure term is treated implicitly and the resulting pressure equation is solved with the eigenexpansion method employing a robust and novel formulation. We provide a detailed and complete description of the theoretical approach together with information about the numerical technique and implementation details. Results of benchmarking tests are provided for five different test cases. △ Less

Submitted 24 May, 2020; originally announced May 2020.

Interface-resolved simulations of small inertial particles in turbulent channel flow

Authors: Pedro Costa, Luca Brandt, Francesco Picano

Abstract: We present a direct comparison between interface-resolved and one-way-coupled point-particle direct numerical simulations (DNS) of gravity-free turbulent channel flow laden with small inertial particles, with high particle-to-fluid density ratio and diameter of about $3$ viscous units. The most dilute flow considered, solid volume fraction $O(10^{-5})$, shows the particle feedback on the flow to b… ▽ More We present a direct comparison between interface-resolved and one-way-coupled point-particle direct numerical simulations (DNS) of gravity-free turbulent channel flow laden with small inertial particles, with high particle-to-fluid density ratio and diameter of about $3$ viscous units. The most dilute flow considered, solid volume fraction $O(10^{-5})$, shows the particle feedback on the flow to be negligible, whereas differences with respect to the unladen case, noteworthy a drag increase of about $10\%$, are found for a volume fraction $O(10^{-4})$. This is attributed to a dense layer of particles at the wall, caused by turbophoresis, flowing with large particle-to-fluid apparent slip velocity. The most dilute case is therefore taken as the benchmark for assessing the validity of a widely used point-particle model, where the particle dynamics results only from inertial and nonlinear drag forces. In the bulk of the channel, the first- and second-order moments of the particle velocity from the point-particle DNS agree well with those from the interface-resolved DNS. Close to the wall, however, most of the statistics show major qualitative differences. We show that this difference originates from the strong shear-induced lift force acting on the particles in the near-wall region. This mechanism is well captured by the lift force model due to Saffman (J. Fluid Mech., vol. 22 (2), 1965, pp. 385--400), while other widely used, more elaborate, approaches aiming at extending the lift model for a wider range of particle Reynolds numbers can actually underpredict the magnitude of the near-wall particle velocity fluctuations for the cases analysed here. △ Less

Submitted 13 November, 2019; v1 submitted 4 June, 2019; originally announced June 2019.

Journal ref: J. Fluid. Mech. 883 (2020) A54

The effect of polydispersity in a turbulent channel flow laden with finite-size particles

Authors: Walter Fornari, Francesco Picano, Luca Brandt

Abstract: We study turbulent channel flows of monodisperse and polydisperse suspensions of finite-size spheres by means of Direct Numerical Simulations using an immersed boundary method to account for the dispersed phase. Suspensions with 3 different Gaussian distributions of particle radii are considered (i.e. 3 different standard deviations). The distributions are centered on the reference particle radius… ▽ More We study turbulent channel flows of monodisperse and polydisperse suspensions of finite-size spheres by means of Direct Numerical Simulations using an immersed boundary method to account for the dispersed phase. Suspensions with 3 different Gaussian distributions of particle radii are considered (i.e. 3 different standard deviations). The distributions are centered on the reference particle radius of the monodisperse suspension. In the most extreme case, the radius of the largest particles is 4 times that of the smaller particles. We consider two different solid volume fractions, 2% and 10%. We find that for all polydisperse cases, both fluid and particles statistics are not substantially altered with respect to those of the monodisperse case. Mean streamwise fluid and particle velocity profiles are almost perfectly overlap**. Slightly larger differences are found for particle velocity fluctuations. These increase close to the wall and decrease towards the centerline as the standard deviation of the distribution is increased. Hence, the behavior of the suspension is mostly governed by excluded volume effects regardless of particle size distribution (at least for the radii here studied). Due to turbulent mixing, particles are uniformly distributed across the channel. However, smaller particles can penetrate more into the viscous and buffer layer and velocity fluctuations are therein altered. Non trivial results are presented for particle-pair statistics. △ Less

Submitted 24 May, 2017; originally announced May 2017.

Comments: Under review in the European Journal of Mechanics/B - Fluids

Statistics of particle accumulation in spatially develo** turbulent boundary layers

Authors: Gaetano Sardina, Francesco Picano, Philip Schlatter, Luca Brandt, Carlo Massimo Casciola

Abstract: We present the results of a Direct Numerical Simulation of a particle-laden spatially develo** turbulent boundary layer up to Reθ = 2500. Two main features differentiate the behavior of inertial particles in a zero- pressure-gradient turbulent boundary layer from the more commonly studied case of a parallel channel flow. The first is the variation along the streamwise direction of the local dime… ▽ More We present the results of a Direct Numerical Simulation of a particle-laden spatially develo** turbulent boundary layer up to Reθ = 2500. Two main features differentiate the behavior of inertial particles in a zero- pressure-gradient turbulent boundary layer from the more commonly studied case of a parallel channel flow. The first is the variation along the streamwise direction of the local dimensionless parameters defining the fluid-particle in- teractions. The second is the coexistence of an irrotational free-stream and a near-wall rotational turbulent flow. As concerns the first issue, an inner and an outer Stokes number can be defined using inner and outer flow units. The inner Stokes number governs the near-wall behavior similarly to the case of channel flow. To understand the effect of a laminar-turbulent interface, we ex- amine the behavior of particles initially released in the free stream and show that they present a distinct behavior with respect to those directly injected inside the boundary layer. A region of minimum concentration occurs inside the turbulent boundary layer at about one displacement thickness from the wall. Its formation is due to the competition between two transport mecha- nisms: a relatively slow turbulent diffusion towards the buffer layer and a fast turbophoretic drift towards the wall. △ Less

Submitted 30 March, 2017; originally announced March 2017.

Effects of the finite particle size in turbulent wall-bounded flows of dense suspensions

Authors: Pedro Costa, Francesco Picano, Luca Brandt, Wim-Paul Breugem

Abstract: We use interface-resolved simulations to study finite-size effects in turbulent channel flow of neutrally-buoyant spheres. Two cases with particle sizes differing by a factor of 2, at the same solid volume fraction of 20% and bulk Reynolds number are considered. These are complemented with two reference single-phase flows: the unladen case, and the flow of a Newtonian fluid with the effective susp… ▽ More We use interface-resolved simulations to study finite-size effects in turbulent channel flow of neutrally-buoyant spheres. Two cases with particle sizes differing by a factor of 2, at the same solid volume fraction of 20% and bulk Reynolds number are considered. These are complemented with two reference single-phase flows: the unladen case, and the flow of a Newtonian fluid with the effective suspension viscosity of the same mixture in the laminar regime. As recently highlighted in Costa et al. (PRL 117, 134501), a particle-wall layer is responsible for deviations of the statistics from what is observed in the continuum limit where the suspension is modeled as a Newtonian fluid with an effective viscosity. Here we investigate the fluid and particle dynamics in this layer and in the bulk. In the particle-wall layer, the near wall inhomogeneity has an influence on the suspension micro-structure over a distance proportional to the particle size. In this layer, particles have a significant (apparent) slip velocity that is reflected in the distribution of wall shear stresses. This is characterized by extreme events (both much higher and much lower than the mean). Based on these observations we provide a scaling for the particle-to-fluid apparent slip velocity as a function of the flow parameters. We also extend the flow scaling laws in to second-order Eulerian statistics in the homogeneous suspension region away from the wall. Finite-size effects in the bulk of the channel become important for larger particles, while negligible for lower-order statistics and smaller particles. Finally, we study the particle dynamics along the wall-normal direction. Our results suggest that 1-point dispersion is dominated by particle-turbulence (and not particle-particle) interactions, while differences in 2-point dispersion and collisional dynamics are consistent with a picture of shear-driven interactions. △ Less

Submitted 7 February, 2018; v1 submitted 17 March, 2017; originally announced March 2017.

Journal ref: J. Fluid. Mech. 843 (2018) 450-478

Evaporation of dilute droplets in a turbulent jet: clustering and entrainment effects

Authors: Federico Dalla Barba, Francesco Picano

Abstract: Droplet evaporation in turbulent sprays involves unsteady, multiscale and multiphase processes which make its comprehension and model capabilities still limited. The present work aims to investigate droplet vaporization dynamics within a turbulent spatial develo** jet in dilute, non-reacting conditions. We address the problem using a Direct Numerical Simulation of jet laden with acetone droplets… ▽ More Droplet evaporation in turbulent sprays involves unsteady, multiscale and multiphase processes which make its comprehension and model capabilities still limited. The present work aims to investigate droplet vaporization dynamics within a turbulent spatial develo** jet in dilute, non-reacting conditions. We address the problem using a Direct Numerical Simulation of jet laden with acetone droplets using an hybrid Eulerian/Lagrangian approach based on the point droplet approximation. A detailed statistical analysis of both phases is presented. In particular, we show how crucial is the preferential sampling of the vapour phase induced by the inhomogeneous localization of the droplets through the flow. The preferential segregation of droplets develops suddenly downstream the inlet both within the turbulent core and in the mixing layer. Two distinct mechanisms have been found to drive these phenomena, the inertial small-scale clustering in the jet core and the intermittent dynamics of droplets across the turbulent/non-turbulent interface in the mixing layer where dry air entrainment occurs. These phenomenologies strongly affect the overall vaporization process and lead to a spectacular widening of droplets size and vaporization rate distributions in the downstream evolution of the turbulent spray. △ Less

Submitted 17 March, 2017; originally announced March 2017.

Curvature effects in turbulent premixed flames of H$_2$/Air: a DNS study with reduced chemistry

Authors: Gabriele Rocco, Francesco Battista, Francesco Picano, Guido Troiani, Carlo Massimo Casciola

Abstract: Data from a three-dimensional Direct Numerical Simulation of a turbulent premixed Bunsen flame at a low global Lewis number are analyzed to address the effects of the curvature on the local flame front. For this purpose, the chemical kinetics is modeled according to a reduced scheme, involving 5 reactions and 7 species, to mimic a H$_{2}$/Air flame at equivalence ratio $φ=0.5$. An increase of the… ▽ More Data from a three-dimensional Direct Numerical Simulation of a turbulent premixed Bunsen flame at a low global Lewis number are analyzed to address the effects of the curvature on the local flame front. For this purpose, the chemical kinetics is modeled according to a reduced scheme, involving 5 reactions and 7 species, to mimic a H$_{2}$/Air flame at equivalence ratio $φ=0.5$. An increase of the local temperature and reaction rate is found for fronts elongated into the fresh gases (concave), while local quenching is observed for fronts elongated in the opposite direction (convex), i.e. towards the burnt mixture. Data show that the occurrence in the reaction region of these super-reactive (concave fronts) and quenched zones (convex fronts) is predominant compared to a behavior compatible with the corresponding unstretched laminar flame. In particular, well inside the reaction region, the probability density function of the OH radical concentration shows a bi-modal shape with peaks corresponding to negative (concave) and positive (convex) curvatures, while a locally flat front is less frequently detected. The two states are associated with a higher and lower chemical activity with respect the laminar case. Additional statistics conditioned to the local hydrogen concentration provide further information on this dual-state dynamics and on the differences with respect to the corresponding laminar unstretched flame when moving from the fresh to the burnt gas regions. Finally we discuss the effects of the turbulence on the thermo-diffusive instability showing that the turbulent fluctuations, increasing the flame front corrugations, are essentially responsible of the local flame quenching. △ Less

Submitted 16 February, 2017; originally announced February 2017.

Comments: Published on Flow, Turbulence and Combustion

Journal ref: Flow, Turbulence and Combustion, Volume 94, Issue 2, pp 359-379 (2015)

Fractal scaling of turbulent premixed flame fronts: application to LES

Authors: Francesco Battista, Guido Troiani, Francesco Picano

Abstract: The fractal scaling properties of turbulent premixed flame fronts have been investigated and considered for modelling sub-grid scales in the Large-Eddy-Simulation framework. Since the width of such thin reaction fronts cannot be resolved into the coarse mesh of LES, the extent of wrinkled flame surface contained in a volume is taken into account. The amount of unresolved flame front is estimated v… ▽ More The fractal scaling properties of turbulent premixed flame fronts have been investigated and considered for modelling sub-grid scales in the Large-Eddy-Simulation framework. Since the width of such thin reaction fronts cannot be resolved into the coarse mesh of LES, the extent of wrinkled flame surface contained in a volume is taken into account. The amount of unresolved flame front is estimated via the "wrinkling facto" that depends on the definition of a suitable fractal dimension and the scale at which the fractal scaling is lost, the inner cut-off length εi. In this context, the present study considers laboratory experiments and one-step reaction DNS of turbulent premixed jet flames in different regimes of turbulent premixed flames. Fractal dimension is found to be substantially constant and well below that typical of passive scalar fronts. The inner cut-off length shows a clear scaling with the dissipative scale of Kolmogorov for the regimes here considered. These features have been exploited performing Large Eddy Simulations. Good model performance has been found comparing the LES against a corresponding DNS at moderate Reynolds number and experimental data at higher Reynolds numbers. △ Less

Submitted 15 February, 2017; originally announced February 2017.

Comments: 26 pages, 9 figures

Journal ref: International Journal of Heat and Fluid Flow 51 (2015) 78-87

Turbulent channel flow of a dense binary mixture of rigid particles

Authors: Iman Lashgari, Francesco Picano, Pedro Costa, Wim-Paul Breugem, Luca Brandt

Abstract: We study turbulent channel flow of a binary mixture of finite-size neutrally-buoyant rigid particles by means of interface-resolved direct numerical simulations. We fix the bulk Reynolds number and total solid volume fraction, $Re_b = 5600$ and $Φ=20\%$, and vary the relative fraction of small and large particles. The binary mixture consists of particles of two different sizes, $2h/d_l=20$ and… ▽ More We study turbulent channel flow of a binary mixture of finite-size neutrally-buoyant rigid particles by means of interface-resolved direct numerical simulations. We fix the bulk Reynolds number and total solid volume fraction, $Re_b = 5600$ and $Φ=20\%$, and vary the relative fraction of small and large particles. The binary mixture consists of particles of two different sizes, $2h/d_l=20$ and $2h/d_s=30$ where $h$ is the half channel height and $d_l$ and $d_s$ the diameter of the large and small particles. While the particulate flow statistics exhibit a significant alteration of the mean velocity profile and turbulent fluctuations with respect to the unladen flow, the differences between the mono-disperse and bi-disperse cases are small. However, we observe a clear segregation of small particles at the wall in binary mixtures, which affects the dynamics of the near wall region and thus the overall drag. This results in a higher drag in suspensions with a larger amount of large particles. As regards bi-disperse effects on the particle dynamics, a non-monotonic variation of the particle dispersion in the spanwise (homogeneous) direction is observed when increasing the percentage of small/large particles. Finally, we note that particles of the same size tend to cluster more at contact whereas the dynamics of the large particles gives highest collision kernels due to a higher approaching speed. △ Less

Submitted 28 February, 2017; v1 submitted 6 December, 2016; originally announced December 2016.

Comments: 22 pages, 12 figures

Journal ref: J. Fluid Mech. 818 (2017) 623-645

Heat transfer in laminar Couette flow laden with rigid spherical particles

Authors: Mehdi Niazi Ardekani, Omid Abouali, Francesco Picano, Luca Brandt

Abstract: We study heat transfer in plane Couette flow laden with rigid spherical particles by means of direct numerical simulations using a direct-forcing immersed boundary method to account for the dispersed phase. A volume of fluid approach is employed to solve the temperature field inside and outside of the particles. We focus on the variation of the heat transfer with the particle Reynolds number, to… ▽ More We study heat transfer in plane Couette flow laden with rigid spherical particles by means of direct numerical simulations using a direct-forcing immersed boundary method to account for the dispersed phase. A volume of fluid approach is employed to solve the temperature field inside and outside of the particles. We focus on the variation of the heat transfer with the particle Reynolds number, total volume fraction (number of particles) and the ratio between the particle and fluid thermal diffusivity, quantified in terms of an effective suspension diffusivity. We show that, when inertia at the particle scale is negligible, the heat transfer increases with respect to the unladen case following an empirical correlation recently proposed. In addition, an average composite diffusivity can be used to predict the effective diffusivity of the suspension the inertialess regime when varying the molecular diffusion in the two phases. At finite particle inertia, however, the heat transfer increase is significantly larger, saturating at higher volume fractions. By phase-ensemble averaging we identify the different mechanisms contributing to the total heat transfer and show that the increase of the effective conductivity observed at finite inertia is due to the increase of the transport associated to fluid and particle velocity. We also show that the heat conduction in the solid phase reduces when increasing the particle Reynolds number and so that particles of low thermal diffusivity weakly alter the total heat flux in the suspension at finite particle Reynolds numbers. On the other hand, a higher particle thermal diffusivity significantly increase the total heat transfer. △ Less

Submitted 7 November, 2016; originally announced November 2016.

Flow and dispersion in anisotropic porous media: a Lattice-Boltzmann study

Authors: Dario Maggiolo, Francesco Picano, Massimo Guarnieri

Abstract: Given their capability of spreading active chemical species and collecting electricity, porous media made of carbon fibers are extensively used as diffusion layers in energy storage systems, such as redox flow batteries. In spite of this, the dispersion dynamics of species inside porous media is still not well understood and often lends itself to different interpretations. Actually, the microscopi… ▽ More Given their capability of spreading active chemical species and collecting electricity, porous media made of carbon fibers are extensively used as diffusion layers in energy storage systems, such as redox flow batteries. In spite of this, the dispersion dynamics of species inside porous media is still not well understood and often lends itself to different interpretations. Actually, the microscopic design of efficient porous media which can potentially and effectively improve the performances of flow batteries, is a still open challenge. The present study aims to investigate the effect of fibrous media micro-structure on dispersion, in particular the effect of fiber orientation on drag and dispersion dynamics. Several Lattice-Boltzmann simulations of {flows through} differently-oriented fibrous media coupled with Lagrangian simulations of particle tracers have been performed. Results show that orienting fibers preferentially along the streamwise direction minimizes the drag and maximizes the dispersion, which is the most desirable condition for diffusion layers in flow batteries applications. △ Less

Submitted 26 September, 2016; originally announced September 2016.

Reduced particle settling speed in turbulence

Authors: Walter Fornari, Francesco Picano, Gaetano Sardina, Luca Brandt

Abstract: We study the settling of finite-size rigid spheres in sustained homogeneous isotropic turbulence (HIT) by direct numerical simulations using an immersed boundary method to account for the dispersed solid phase. We study semi-dilute suspensions at different Galileo numbers, Ga. The Galileo number is the ratio between buoyancy and viscous forces, and is here varied via the solid-to-fluid density rat… ▽ More We study the settling of finite-size rigid spheres in sustained homogeneous isotropic turbulence (HIT) by direct numerical simulations using an immersed boundary method to account for the dispersed solid phase. We study semi-dilute suspensions at different Galileo numbers, Ga. The Galileo number is the ratio between buoyancy and viscous forces, and is here varied via the solid-to-fluid density ratio. The focus is on particles that are slightly heavier than the fluid. We find that in HIT, the mean settling speed is less than that in quiescent fluid; in particular, it reduces by 6%-60% with respect to the terminal velocity of an isolated sphere in quiescent fluid as the ratio between the latter and the turbulent velocity fluctuations is decreased. Analysing the fluid-particle relative motion, we find that the mean settling speed is progressively reduced while reducing the density ratio due to the increase of the vertical drag induced by the particle cross-flow velocity. Unsteady effects contribute to the mean overall drag by about 6%-10%. The probability density functions of particle velocities and accelerations reveal that these are closely related to the features of the turbulent flow. The particle mean-square displacement in the settling direction is found to be similar for all Ga if time is scaled by (2a)/u' (where 2a is the particle diameter and u' is the turbulence velocity root mean square). △ Less

Submitted 28 November, 2016; v1 submitted 30 August, 2016; originally announced August 2016.

Comments: Accepted for publication in Journal of Fluid Mechanics

Drag reduction in turbulent channel flow laden with finite-size oblate spheroids

Authors: M. Niazi Ardekani, P. Costa, W. -P. Breugem, F. Picano, L. Brandt

Abstract: We study suspensions of oblate rigid particles in a viscous fluid for different values of the particle volume fractions. Direct numerical simulations have been performed using a direct-forcing immersed boundary method to account for the dispersed phase, combined with a soft-sphere collision model and lubrication corrections for short-range particle-particle and particle-wall interactions. With res… ▽ More We study suspensions of oblate rigid particles in a viscous fluid for different values of the particle volume fractions. Direct numerical simulations have been performed using a direct-forcing immersed boundary method to account for the dispersed phase, combined with a soft-sphere collision model and lubrication corrections for short-range particle-particle and particle-wall interactions. With respect to the single phase flow, we show that in flows laden with oblate spheroids the drag is reduced and the turbulent fluctuations attenuated. In particular, the turbulence activity decreases to lower values than those obtained by only accounting for the effective suspension viscosity. To explain the observed drag reduction we consider the particle dynamics and the interactions of the particles with the turbulent velocity field and show that the particle wall layer, previously observed and found to be responsible for the increased dissipation in suspensions of spheres, disappears in the case of oblate particles. These rotate significantly slower than spheres near the wall and tend to stay with their major axes parallel to the wall, which leads to a decrease of the Reynolds stresses and turbulence production and so to the overall drag reduction. △ Less

Submitted 24 January, 2017; v1 submitted 3 July, 2016; originally announced July 2016.

Journal ref: J. Fluid. Mech. 816 (2017) 43-70

Universal Scaling Laws for Dense Particle Suspensions in Turbulent Wall-Bounded Flows

Authors: Pedro Costa, Francesco Picano, Luca Brandt, Wim-Paul Breugem

Abstract: The macroscopic behavior of dense suspensions of neutrally-buoyant spheres in turbulent plane channel flow is examined. We show that particles larger than the smallest turbulence scales cause the suspension to deviate from the continuum limit in which its dynamics is well described by an effective suspension viscosity. This deviation is caused by the formation of a particle layer close to the wall… ▽ More The macroscopic behavior of dense suspensions of neutrally-buoyant spheres in turbulent plane channel flow is examined. We show that particles larger than the smallest turbulence scales cause the suspension to deviate from the continuum limit in which its dynamics is well described by an effective suspension viscosity. This deviation is caused by the formation of a particle layer close to the wall with significant slip velocity. By assuming two distinct transport mechanisms in the near-wall layer and the turbulence in the bulk, we define an effective wall location such that the flow in the bulk can still be accurately described by an effective suspension viscosity. We thus propose scaling laws for the mean velocity profile of the suspension flow, together with a master equation able to predict the increase in drag as function of the particle size and volume fraction. △ Less

Submitted 31 August, 2016; v1 submitted 11 January, 2016; originally announced January 2016.

Comments: Accepted for publication in PRL. Supplemental material included

Journal ref: Phys. Rev. Lett. 117, 134501 (2016)

The effect of particle density in turbulent channel flow laden with finite size particles in semi-dilute conditions

Authors: Walter Fornari, Alberto Formenti, Francesco Picano, Luca Brandt

Abstract: We study the effect of varying the mass and volume fraction of a suspension of rigid spheres dispersed in a turbulent channel flow. We performed several Direct Numerical Simulations using an Immersed Boundary Method for finite-size particles changing the solid to fluid density ratio, the mass fraction and the volume fraction. We find that varying the density ratio between 1 and 10 at constant volu… ▽ More We study the effect of varying the mass and volume fraction of a suspension of rigid spheres dispersed in a turbulent channel flow. We performed several Direct Numerical Simulations using an Immersed Boundary Method for finite-size particles changing the solid to fluid density ratio, the mass fraction and the volume fraction. We find that varying the density ratio between 1 and 10 at constant volume fraction does not alter the flow statistics as much as when varying the volume fraction at constant and at constant mass fraction. Interestingly, the increase in overall drag found when varying the volume fraction is considerably higher than that obtained for increasing density ratios at same volume fraction. The main effect at density ratios of the order of 10 is a strong shear-induced migration towards the centerline of the channel. When the density ratio is further increased up to 1000 the particle dynamics decouple from that of the fluid. The solid phase behaves as a dense gas and the fluid and solid phase statistics drastically change. In this regime, the collision rate is high and dominated by the normal relative velocity among particles. △ Less

Submitted 27 April, 2016; v1 submitted 4 November, 2015; originally announced November 2015.

Comments: Accepted in Physics of Fluids

Channel flow of rigid sphere suspensions: particle dynamics in the inertial regime

Authors: Iman Lashgari, Francesco Picano, Wim Paul Breugem, Luca Brandt

Abstract: We consider suspensions of neutrally-buoyant finite-size rigid spherical particles in channel flow and investigate the relation between the particle dynamics and the mean bulk behavior of the mixture for Reynolds numbers $500 \le Re \le 5000$ and particle volume fraction $0\le Φ\le 0.3$, via fully resolved numerical simulations. Analysis of the momentum balance reveals the existence of three diffe… ▽ More We consider suspensions of neutrally-buoyant finite-size rigid spherical particles in channel flow and investigate the relation between the particle dynamics and the mean bulk behavior of the mixture for Reynolds numbers $500 \le Re \le 5000$ and particle volume fraction $0\le Φ\le 0.3$, via fully resolved numerical simulations. Analysis of the momentum balance reveals the existence of three different regimes: laminar, turbulent and inertial shear-thickening depending on which of the stress terms, viscous, Reynolds or particle stress, is the major responsible for the momentum transfer across the channel. We show that both Reynolds and particle stress dominated flows fall into the Bagnoldian inertial regime and that the Bagnold number can predict the bulk behavior although this is due to two distinct physical mechanisms. A turbulent flow is characterized by larger particle dispersion and a more uniform particle distribution, whereas the particulate-dominated flows is associated with a significant particle migration towards the channel center where the flow is smooth laminar-like and dispersion low.Interestingly, the collision kernel shows similar values in the different regimes, although the relative particle velocity and clustering clearly vary with inertia and particle concentration. △ Less

Submitted 19 April, 2015; originally announced April 2015.

Comments: 36 Pages, 12 figures

Sedimentation of finite-size spheres in quiescent and turbulent environments

Authors: Walter Fornari, Francesco Picano, Luca Brandt

Abstract: Sedimentation of a dispersed solid phase is widely encountered in applications and environmental flows, yet little is known about the behavior of finite-size particles in homogeneous isotropic turbulence. To fill this gap, we perform Direct Numerical Simulations of sedimentation in quiescent and turbulent environments using an Immersed Boundary Method to account for the dispersed rigid spherical p… ▽ More Sedimentation of a dispersed solid phase is widely encountered in applications and environmental flows, yet little is known about the behavior of finite-size particles in homogeneous isotropic turbulence. To fill this gap, we perform Direct Numerical Simulations of sedimentation in quiescent and turbulent environments using an Immersed Boundary Method to account for the dispersed rigid spherical particles. The solid volume fractions considered are 0.5-1%, while the solid to fluid density ratio 1.02. The particle radius is chosen to be approximately 6 Komlogorov lengthscales. The results show that the mean settling velocity is lower in an already turbulent flow than in a quiescent fluid. The reduction with respect to a single particle in quiescent fluid is about 12\% and 14\% for the two volume fractions investigated. The probability density function of the particle velocity is almost Gaussian in a turbulent flow, whereas it displays large positive tails in quiescent fluid. These tails are associated to the intermittent fast sedimentation of particle pairs in drafting-kissing-tumbling motions. The particle lateral dispersion is higher in a turbulent flow, whereas the vertical one is, surprisingly, of comparable magnitude as a consequence of the highly intermittent behavior observed in the quiescent fluid. Using the concept of mean relative velocity we estimate the mean drag coefficient from empirical formulas and show that non stationary effects, related to vortex shedding, explain the increased reduction in mean settling velocity in a turbulent environment. △ Less

Submitted 18 November, 2015; v1 submitted 16 March, 2015; originally announced March 2015.

Comments: In press on Journal of Fluid Mechanics

Continuous growth of droplet size variance due to condensation in turbulent clouds

Authors: Gaetano Sardina, Francesco Picano, Luca Brandt, Rodrigo Caballero

Abstract: We use a stochastic model and direct numerical simulation to study the impact of turbulence on cloud droplet growth by condensation. We show that the variance of the droplet size distribution increases in time as t^{1/2}, with growth rate proportional to the large-to-small turbulent scale separation and to the turbulence integral scales but independent of the mean turbulent dissipation. Direct num… ▽ More We use a stochastic model and direct numerical simulation to study the impact of turbulence on cloud droplet growth by condensation. We show that the variance of the droplet size distribution increases in time as t^{1/2}, with growth rate proportional to the large-to-small turbulent scale separation and to the turbulence integral scales but independent of the mean turbulent dissipation. Direct numerical simulations confirm this result and produce realistically broad droplet size spectra over time intervals of 20 minutes, comparable with the time of rain formation. △ Less

Submitted 5 October, 2015; v1 submitted 28 January, 2015; originally announced January 2015.

Comments: 5 pages, 3 figures+Supplemental material 6 pages, 5 figures

Transition and self-sustained turbulence in dilute suspensions of finite-size particles

Authors: Iman Lashgari, Francesco Picano, Luca Brandt

Abstract: We study the transition to turbulence of channel flow of finite-size particle suspensions at low volume fraction, i.e. $Φ\approx 0.001$. The critical Reynolds number above which turbulence is sustained reduces to $Re \approx 1675$, in the presence of few particles, independently of the initial condition, a value lower than that of the corresponding single-phase flow, i.e. $Re\approx1775$. In the d… ▽ More We study the transition to turbulence of channel flow of finite-size particle suspensions at low volume fraction, i.e. $Φ\approx 0.001$. The critical Reynolds number above which turbulence is sustained reduces to $Re \approx 1675$, in the presence of few particles, independently of the initial condition, a value lower than that of the corresponding single-phase flow, i.e. $Re\approx1775$. In the dilute suspension, the initial arrangement of the particles is important to trigger the transition at a fixed Reynolds number and particle volume fraction. As in single phase flows, streamwise elongated disturbances are initially induced in the flow. If particles can induce oblique disturbances with high enough energy within a certain time, the streaks breakdown, flow experiences the transition to turbulence and the particle trajectories become chaotic. Otherwise, the streaks decay in time and the particles immigrate towards the channel core in a laminar flow. △ Less

Submitted 26 January, 2015; originally announced January 2015.

Comments: 12 pages, 3 figures

Turbulent channel flow of dense suspensions of neutrally-buoyant spheres

Authors: F. Picano, W. -P. Breugem, L. Brandt

Abstract: Dense particle suspensions are widely encountered in many applications and in environmental flows. While many previous studies investigate their rheological properties in laminar flows, little is known on the behaviour of these suspensions in the turbulent/inertial regime. The present study aims to fill this gap by investigating the turbulent flow of a Newtonian fluid laden with solid neutrally-bu… ▽ More Dense particle suspensions are widely encountered in many applications and in environmental flows. While many previous studies investigate their rheological properties in laminar flows, little is known on the behaviour of these suspensions in the turbulent/inertial regime. The present study aims to fill this gap by investigating the turbulent flow of a Newtonian fluid laden with solid neutrally-buoyant spheres at relatively high volume fractions in a plane channel. Direct Numerical Simulation are performed in the range of volume fractions Phi=0-0.2 with an Immersed Boundary Method used to account for the dispersed phase. The results show that the mean velocity profiles are significantly altered by the presence of a solid phase with a decrease of the von Karman constant in the log-law. The overall drag is found to increase with the volume fraction, more than one would expect just considering the increase of the system viscosity due to the presence of the particles. At the highest volume fraction here investigated, Phi=0.2, the velocity fluctuation intensities and the Reynolds shear stress are found to decrease. The analysis of the mean momentum balance shows that the particle-induced stresses govern the dynamics at high Phi and are the main responsible of the overall drag increase. In the dense limit, we therefore find a decrease of the turbulence activity and a growth of the particle induced stress, where the latter dominates for the Reynolds numbers considered here. △ Less

Submitted 14 October, 2015; v1 submitted 6 September, 2014; originally announced September 2014.

Comments: Journal of Fluid Mechanics, 2015

Journal ref: J. of Fluid Mechanics 764, 463-487, 2015

Numerical simulations of aggregate breakup in bounded and unbounded turbulent flows

Authors: Matthaus U. Babler, Luca Biferale, Luca Brandt, Ulrike Feudel, Ksenia Guseva, Alessandra S. Lanotte, Cristian Marchioli, Francesco Picano, Gaetano Sardina, Alfredo Soldati, Federico Toschi

Abstract: Breakup of small aggregates in fully developed turbulence is studied by means of direct numerical simulations in a series of typical bounded and unbounded flow configurations, such as a turbulent channel flow, a develo** boundary layer and homogeneous isotropic turbulence. The simplest criterion for breakup is adopted, whereas aggregate breakup occurs when the local hydrodynamic stress… ▽ More Breakup of small aggregates in fully developed turbulence is studied by means of direct numerical simulations in a series of typical bounded and unbounded flow configurations, such as a turbulent channel flow, a develo** boundary layer and homogeneous isotropic turbulence. The simplest criterion for breakup is adopted, whereas aggregate breakup occurs when the local hydrodynamic stress $σ\sim \varepsilon^{1/2}$, with $\varepsilon$ being the energy dissipation at the position of the aggregate, overcomes a given threshold $σ_\mathrm{cr}$, which is characteristic for a given type of aggregates. Results show that the breakup rate decreases with increasing threshold. For small thresholds, it develops a universal scaling among the different flows. For high thresholds, the breakup rates show strong differences between the different flow configurations, highlighting the importance of non-universal mean-flow properties. To further assess the effects of flow inhomogeneity and turbulent fluctuations, theresults are compared with those obtained in a smooth stochastic flow. Furthermore, we discuss the limitations and applicability of a set of independent proxies. △ Less

Submitted 17 February, 2015; v1 submitted 11 June, 2014; originally announced June 2014.

Comments: 15 pages, 12 figures, Refinded discussion in Section 2.1, results unchanged

Journal ref: Journal of Fluid Mechanics 766 (2015) 104-128

Exact regularized point particle method for multi-phase flows in the two-way coupling regime

Authors: P. Gualtieri, F. Picano, G. Sardina, C. M. Casciola

Abstract: Particulate flows have been largely studied under the simplifying assumptions of one-way coupling regime where the disperse phase do not react-back on the carrier fluid. In the context of turbulent flows, many non trivial phenomena such as small scales particles clustering or preferential spatial accumulation have been explained and understood. A more complete view of multiphase flows can be gaine… ▽ More Particulate flows have been largely studied under the simplifying assumptions of one-way coupling regime where the disperse phase do not react-back on the carrier fluid. In the context of turbulent flows, many non trivial phenomena such as small scales particles clustering or preferential spatial accumulation have been explained and understood. A more complete view of multiphase flows can be gained calling into play two-way coupling effects, i.e. by accounting for the inter-phase momentum exchange between the carrier and the suspended phase, certainly relevant at increasing mass loading. In such regime, partially investigated in the past by the so-called Particle In Cell (PIC) method, much is still to be learned about the dynamics of the disperse phase and the ensuing alteration of the carrier flow. In this paper we present a new methodology rigorously designed to capture the inter-phase momentum exchange for particles smaller than the smallest hydrodynamical scale, e.g. the Kolmogorov scale in a turbulent flow. In fact, the momentum coupling mechanism exploits the unsteady Stokes flow around a small rigid sphere where the transient disturbance produced by each particle is evaluated in a closed form. The particles are described as lumped, point masses which would lead to the appearance of singularities. A rigorous regularization procedure is conceived to extract the physically relevant interactions between particles and fluid which avoids any "ah hoc" assumption. The approach is suited for high efficiency implementation on massively parallel machines since the transient disturbance produced by the particles is strongly localized in space around the actual particle position. As will be shown, hundred thousands particles can therefore be handled at an affordable computational cost as demonstrated by a preliminary application to a particle laden turbulent shear flow. △ Less

Submitted 27 May, 2014; originally announced May 2014.

Comments: Submitted to Journal of Fluid Mechanics, 56 pages, 15 figures

Turbulent mixing of a slightly supercritical Van der Waals fluid at Low-Mach number

Authors: Francesco Battista, Francesco Picano, Carlo Massimo Casciola

Abstract: Supercritical fluids near the critical point are characterized by liquid-like densities and gas-like transport properties. These features are purposely exploited in different contexts ranging from natural products extraction/fractionation to aerospace propulsion. Large part of studies concerns this last context, focusing on the dynamics of supercritical fluids at high Mach number where compressibi… ▽ More Supercritical fluids near the critical point are characterized by liquid-like densities and gas-like transport properties. These features are purposely exploited in different contexts ranging from natural products extraction/fractionation to aerospace propulsion. Large part of studies concerns this last context, focusing on the dynamics of supercritical fluids at high Mach number where compressibility and thermodynamics strictly interact. Despite the widespread use also at low Mach number, the turbulent mixing properties of slightly supercritical fluids have still not investigated in detail in this regime. This topic is addressed here by dealing with Direct Numerical Simulations (DNS) of a coaxial jet of a slightly supercritical Van der Waals fluid. Since acoustic effects are irrelevant in the Low Mach number conditions found in many industrial applications, the numerical model is based on a suitable low-Mach number expansion of the governing equation. According to experimental observations, the weakly supercritical regime is characterized by the formation of finger-like structures-- the so-called ligaments --in the shear layers separating the two streams. The mechanism of ligament formation at vanishing Mach number is extracted from the simulations and a detailed statistical characterization is provided. Ligaments always form whenever a high density contrast occurs, independently of real or perfect gas behaviors. The difference between real and perfect gas conditions is found in the ligament small-scale structure. More intense density gradients and thinner interfaces characterize the near critical fluid in comparison with the smoother behavior of the perfect gas. A phenomenological interpretation is here provided on the basis of the real gas thermodynamics properties. △ Less

Submitted 20 May, 2014; v1 submitted 2 April, 2014; originally announced April 2014.

Comments: Published on Physics of Fluids

Journal ref: Physics of Fluids, 26 055101 (2014)

Laminar, turbulent and inertial shear-thickening regimes in channel flow of neutrally buoyant particle suspensions

Authors: Iman Lashgari, Francesco Picano, Wim-Paul Breugem, Luca Brandt

Abstract: The aim of this Letter is to characterize the flow regimes of suspensions of finite-size rigid particles in a viscous fluid at finite inertia. We explore the system behavior as function of the particle volume fraction and the Reynolds number (the ratio of flow and particle inertia to viscous forces). Unlike single phase flows where a clear distinction exists between the laminar and the turbulent s… ▽ More The aim of this Letter is to characterize the flow regimes of suspensions of finite-size rigid particles in a viscous fluid at finite inertia. We explore the system behavior as function of the particle volume fraction and the Reynolds number (the ratio of flow and particle inertia to viscous forces). Unlike single phase flows where a clear distinction exists between the laminar and the turbulent states, three different regimes can be identified in the presence of a particulate phase, with smooth transitions between them. At low volume fractions, the flow becomes turbulent when increasing the Reynolds number, transitioning from the laminar regime dominated by viscous forces to the turbulent regime characterized by enhanced momentum transport by turbulent eddies. At larger volume fractions, we identify a new regime characterized by an even larger increase of the wall friction. The wall friction increases with the Reynolds number (inertial effects) while the turbulent transport is weakly affected, as in a state of intense inertial shear-thickening. This state may prevent the transition to a fully turbulent regime at arbitrary high speed of the flow. △ Less

Submitted 14 November, 2014; v1 submitted 13 February, 2014; originally announced February 2014.

Comments: appears in Physical Review Letters 2014

The effect of the Basset history force on particle clustering in Homogeneous and Isotropic Turbulence

Authors: Stefano Olivieri, Francesco Picano, Gaetano Sardina, Daniele Iudicone, Luca Brandt

Abstract: We study the effect of the Basset history force on the dynamics of small particles transported in homogeneous and isotropic turbulence and show that this term, often neglected in previous numerical studies, reduces the small-scale clustering typical of inertial particles. The contribution of this force to the total particle acceleration is, on average, responsible for about 10% of the total accele… ▽ More We study the effect of the Basset history force on the dynamics of small particles transported in homogeneous and isotropic turbulence and show that this term, often neglected in previous numerical studies, reduces the small-scale clustering typical of inertial particles. The contribution of this force to the total particle acceleration is, on average, responsible for about 10% of the total acceleration and particularly relevant during rare strong events. At moderate density ratios, i.e. sand or metal powder in water, its presence alters the balance of forces determining the particle acceleration. △ Less

Submitted 20 May, 2014; v1 submitted 21 January, 2014; originally announced January 2014.

Journal ref: Physics of Fluids 26 (04), 041704, 2014

Shear thickening in non-Brownian suspensions: an excluded volume effect

Authors: Francesco Picano, Wim-Paul Breugem, Dhrubaditya Mitra, Luca Brandt

Abstract: Shear thickening appears as an increase of the viscosity of a dense suspension with the shear rate, sometimes sudden and violent at high volume fraction. Its origin for noncolloidal suspension with non-negligible inertial effects is still debated. Here we consider a simple shear flow and demonstrate that fluid inertia causes a strong microstructure anisotropy that results in the formation of a sha… ▽ More Shear thickening appears as an increase of the viscosity of a dense suspension with the shear rate, sometimes sudden and violent at high volume fraction. Its origin for noncolloidal suspension with non-negligible inertial effects is still debated. Here we consider a simple shear flow and demonstrate that fluid inertia causes a strong microstructure anisotropy that results in the formation of a shadow region with no relative flux of particles. We show that shear thickening at finite inertia can be explained as an increase of the effective volume fraction when considering the dynamically excluded volume due to these shadow regions △ Less

Submitted 7 September, 2013; v1 submitted 23 November, 2012; originally announced November 2012.

Report number: NORDITA-2012-93

Journal ref: Physical Review Letters 111, 098302, 2013