-
RD53A pixel module assembly and testing experience
Authors:
Alexey Petrukhin
Abstract:
The entire tracking system of the ATLAS experiment will be replaced during the LHC Phase-II shutdown. A new silicon Inner Tracker (ITk) will contain five pixel layers equipped with new sensors and readout electronics capable to improve the tracking performance, cope with the high particle multiplicity and work in a high-luminosity environment. In order to standardize modules of the Inner Tracker,…
▽ More
The entire tracking system of the ATLAS experiment will be replaced during the LHC Phase-II shutdown. A new silicon Inner Tracker (ITk) will contain five pixel layers equipped with new sensors and readout electronics capable to improve the tracking performance, cope with the high particle multiplicity and work in a high-luminosity environment. In order to standardize modules of the Inner Tracker, the idea of a common hybrid pixel module was introduced to be used in all regions of the detector. The common hybrid module assembly and testing techniques will be presented. The module construction, metrology and electrical testing results will be discussed. The work was done with the RD53A pixel modules - prototype modules towards the final ITk pixel detector.
△ Less
Submitted 19 December, 2022;
originally announced December 2022.
-
Testing the new QSM-6M optical module with the NEVOD Cherenkov water detector
Authors:
S. S. Khokhlov,
T. A. Karetnikova,
V. V. Kindin,
N. A. Pasyuk,
A. A. Petrukhin,
I. A. Shulzhenko
Abstract:
The method for studying characteristics of the response of optical modules of neutrino telescopes to various classes of events registered in the volume of the Cherenkov water detector NEVOD is discussed. Results of testing of an optical module with Hamamatsu R877 photomultiplier in single muon events and in events with high energy deposit are presented.
The method for studying characteristics of the response of optical modules of neutrino telescopes to various classes of events registered in the volume of the Cherenkov water detector NEVOD is discussed. Results of testing of an optical module with Hamamatsu R877 photomultiplier in single muon events and in events with high energy deposit are presented.
△ Less
Submitted 6 October, 2021;
originally announced October 2021.
-
The second knee observed in the local muon density spectra at various zenith angles
Authors:
R. P. Kokoulin,
M. B. Amelchakov,
N. S. Barbashina,
A. G. Bogdanov,
D. V. Chernov,
L. I. Dushkin,
S. S. Khokhlov,
V. A. Khomyakov,
V. V. Kindin,
K. G. Kompaniets,
A. A. Petrukhin,
V. V. Shutenko,
I. I. Yashin,
E. A. Yurina,
G. Mannocchi,
G. Trinchero,
O. Saavedra
Abstract:
Local muon density spectra (LMDS) at various zenith angles have been reconstructed from the data of two detectors of the Experimental complex NEVOD. The inclined muon bundles at the ground level were detected with the coordinate detector DECOR, and for the near-vertical direction with the calibration telescope system (CTS) of the Cherenkov water detector. In comparison with the earlier DECOR resul…
▽ More
Local muon density spectra (LMDS) at various zenith angles have been reconstructed from the data of two detectors of the Experimental complex NEVOD. The inclined muon bundles at the ground level were detected with the coordinate detector DECOR, and for the near-vertical direction with the calibration telescope system (CTS) of the Cherenkov water detector. In comparison with the earlier DECOR results, the experimental statistics has been increased by 2-3 times for different ranges of zenith angle and muon bundle multiplicity and is now based on about 40,000 h of the setup operation. The live time of measurements with CTS is about 12,000 h. It is found with both setups that the slope of LMDS is increasing above the primary energy of about 1017 eV. The details of the experiment and data analysis are presented.
△ Less
Submitted 24 January, 2017;
originally announced January 2017.
-
Energy spectrum of cascade showers generated by cosmic ray muons in water
Authors:
R. P. Kokoulin,
N. S. Barbashina,
A. G. Bogdanov,
V. D. Burtsev,
D. V. Chernov,
S. S. Khokhlov,
V. A. Khomyakov,
V. V. Kindin,
K. G. Kompaniets,
A. A. Petrukhin,
V. V. Shutenko,
I. I. Yashin
Abstract:
The spatial distribution of Cherenkov radiation from cascade showers generated by muons in water has been measured with Cherenkov water calorimeter (CWC) NEVOD. This result allowed to improve the techniques of treating cascade showers with unknown axes by means of CWC response analysis. The techniques of selecting the events with high energy cascade showers and reconstructing their parameters are…
▽ More
The spatial distribution of Cherenkov radiation from cascade showers generated by muons in water has been measured with Cherenkov water calorimeter (CWC) NEVOD. This result allowed to improve the techniques of treating cascade showers with unknown axes by means of CWC response analysis. The techniques of selecting the events with high energy cascade showers and reconstructing their parameters are discussed. Preliminary results of measurements of the spectrum of cascade showers in the energy range 100 GeV - 20 TeV generated by cosmic ray muons at large zenith angles and their comparison with expectation are presented.
△ Less
Submitted 16 January, 2017;
originally announced January 2017.
-
Results of measurements of the flux of albedo muons with NEVOD-DECOR experimental complex
Authors:
S. S. Khokhlov,
N. S. Barbashina,
A. G. Bogdanov,
D. V. Chernov,
V. A. Khomyakov,
V. V. Kindin,
R. P. Kokoulin,
K. G. Kompaniets,
A. A. Petrukhin,
V. V. Shutenko,
E. I. Yakovleva,
I. I. Yashin
Abstract:
Results of investigations of the near-horizontal muons in the range of zenith angles of 85-95 degrees are presented. In this range, so-called "albedo" muons (atmospheric muons scattered in the ground into the upper hemisphere) are detected. Albedo muons are one of the main sources of the background in neutrino experiments. Experimental data of two series of measurements conducted at the experiment…
▽ More
Results of investigations of the near-horizontal muons in the range of zenith angles of 85-95 degrees are presented. In this range, so-called "albedo" muons (atmospheric muons scattered in the ground into the upper hemisphere) are detected. Albedo muons are one of the main sources of the background in neutrino experiments. Experimental data of two series of measurements conducted at the experimental complex NEVOD-DECOR with the duration of about 30 thousand hours "live" time are analyzed. The results of measurements of the muon flux intensity are compared with simulation results using Monte-Carlo on the basis of two multiple Coulomb scattering models: model of point-like nuclei and model taking into account finite size of nuclei.
△ Less
Submitted 9 January, 2017;
originally announced January 2017.
-
Investigation of muon flux anisotropy during CME
Authors:
I. I. Astapov,
N. S. Barbashina,
V. V. Borog,
I. S. Veselovsky,
N. V. Osetrova,
A. A. Petrukhin,
V. V. Shutenko
Abstract:
According to CACTus catalog, during periods of a high solar activity every day up to tens of coronal mass ejections are observed. Such ejections have an impact on the flux of cosmic rays that permeate the space around us. Unlike most ground cosmic ray detectors, muon hodoscope URAGAN (MEPhI) allows to investigate not only the integrated counting rate of registered particles, but also the spatial a…
▽ More
According to CACTus catalog, during periods of a high solar activity every day up to tens of coronal mass ejections are observed. Such ejections have an impact on the flux of cosmic rays that permeate the space around us. Unlike most ground cosmic ray detectors, muon hodoscope URAGAN (MEPhI) allows to investigate not only the integrated counting rate of registered particles, but also the spatial and angular characteristics of the muon flux at ground level. This approach to particle detection allows fixing changes in the flux of cosmic rays not only for geoeffective CMEs, but also for the ejections, the front of which is directed to the opposite side of the Sun. The results of the study of different types of CMEs at different stages of the solar activity from 2008 to 2015 are presented.
△ Less
Submitted 31 December, 2016;
originally announced January 2017.
-
High rate, fast timing Glass RPC for the high η CMS muon detectors
Authors:
F. Lagarde,
M. Gouzevitch,
I. Laktineh,
V. Buridon,
X. Chen,
C. Combaret,
A. Eynard,
L. Germani,
G. Grenier,
H. Mathez,
L. Mirabito,
A. Petrukhin,
A. Steen,
W. Tromeuraa,
Y. Wang,
A. Gongab,
N. Moreau,
C. de la Taille,
F. Dulucqac,
A. Cimmino,
S. Crucy,
A. Fagot,
M. Gul,
A. A. O. Rios,
M. Tytgat
, et al. (86 additional authors not shown)
Abstract:
The HL-LHC phase is designed to increase by an order of magnitude the amount of data to be collected by the LHC experiments. To achieve this goal in a reasonable time scale the instantaneous luminosity would also increase by an order of magnitude up to $6.10^{34} cm^{-2} s^{-1}$ . The region of the forward muon spectrometer ($|η| > 1.6$) is not equipped with RPC stations. The increase of the expec…
▽ More
The HL-LHC phase is designed to increase by an order of magnitude the amount of data to be collected by the LHC experiments. To achieve this goal in a reasonable time scale the instantaneous luminosity would also increase by an order of magnitude up to $6.10^{34} cm^{-2} s^{-1}$ . The region of the forward muon spectrometer ($|η| > 1.6$) is not equipped with RPC stations. The increase of the expected particles rate up to $2 kHz/cm^{2}$ (including a safety factor 3) motivates the installation of RPC chambers to guarantee redundancy with the CSC chambers already present. The actual RPC technology of CMS cannot sustain the expected background level. The new technology that will be chosen should have a high rate capability and provides a good spatial and timing resolution. A new generation of Glass-RPC (GRPC) using low-resistivity (LR) glass is proposed to equip at least the two most far away of the four high $η$ muon stations of CMS. First the design of small size prototypes and studies of their performance in high-rate particles flux is presented. Then the proposed designs for large size chambers and their fast-timing electronic readout are examined and preliminary results are provided.
△ Less
Submitted 22 July, 2016; v1 submitted 4 June, 2016;
originally announced June 2016.
-
High rate, fast timing Glass RPC for the high $η$ CMS muon detectors
Authors:
Maxime Gouzevitch,
François Lagarde,
Imad Laktineh,
Victor Buridon,
Xiushan Chen,
Christophe Combaret,
Alexis Eynard,
Lionel Germani,
Gerald Grenier,
Hervé Mathez,
Laurent Mirabito,
Alexei Petrukhin,
Arnaud Steen,
William Tromeur,
Yi Wang,
Fuyue Wang,
Nathalie Moreau,
Christophe de la Taille,
Fréderic Dulucq
Abstract:
The HL-LHC phase is designed to increase by an order of magnitude the amount of data to be collected by the LHC experiments. To achieve this goal in a reasonable time scale the instantaneous luminosity would also increase by an order of magnitude up to $6 \cdot 10^{34}$ cm$^{-2}$s$^{-1}$. The region of the forward muon spectrometer ($|η| > 1.6$) is not equipped with RPC stations. The increase of t…
▽ More
The HL-LHC phase is designed to increase by an order of magnitude the amount of data to be collected by the LHC experiments. To achieve this goal in a reasonable time scale the instantaneous luminosity would also increase by an order of magnitude up to $6 \cdot 10^{34}$ cm$^{-2}$s$^{-1}$. The region of the forward muon spectrometer ($|η| > 1.6$) is not equipped with RPC stations. The increase of the expected particles rate up to 2 kHz/cm$^2$ ( including a safety factor 3 ) motivates the installation of RPC chambers to guarantee redundancy with the CSC chambers already present. The actual RPC technology of CMS cannot sustain the expected background level. A new generation Glass-RPC (GRPC) using low resistivity glass (LR) is proposed to equip at least the two most far away of the four high eta muon stations of CMS. The design of small size prototypes and the studies of their performances under high rate particles flux is presented.
△ Less
Submitted 3 June, 2016;
originally announced June 2016.
-
Resistive Plate Chamber Digitization in a Hadronic Shower Environment
Authors:
Z. Deng,
Y. Li,
Y. Wang,
Q. Yue,
Z. Yang,
J. Apostolakis,
G. Folger,
C. Grefe,
V. Ivantchenko,
A. Ribon,
V. Uzhinskiy,
D. Boumediene,
C. Carloganu,
V. Français,
G. Cho,
D-W. Kim,
S. C. Lee,
W. Park,
S. Vallecorsa,
S. Cauwenbergh,
M. Tytgat,
A. **ault,
N. Zaganidis,
E. Brianne,
A. Ebrahimi
, et al. (103 additional authors not shown)
Abstract:
The CALICE Semi-Digital Hadron Calorimeter (SDHCAL) technological prototype is a sampling calorimeter using Glass Resistive Plate Chamber detectors with a three-threshold readout as the active medium. This technology is one of the two options proposed for the hadron calorimeter of the International Large Detector for the International Linear Collider. The prototype was exposed to beams of muons, e…
▽ More
The CALICE Semi-Digital Hadron Calorimeter (SDHCAL) technological prototype is a sampling calorimeter using Glass Resistive Plate Chamber detectors with a three-threshold readout as the active medium. This technology is one of the two options proposed for the hadron calorimeter of the International Large Detector for the International Linear Collider. The prototype was exposed to beams of muons, electrons and pions of different energies at the CERN Super Proton Synchrotron. To be able to study the performance of such a calorimeter in future experiments it is important to ensure reliable simulation of its response. In this paper we present our prototype simulation performed with GEANT4 and the digitization procedure achieved with an algorithm called SimDigital. A detailed description of this algorithm is given and the methods to determinate its parameters using muon tracks and electromagnetic showers are explained. The comparison with hadronic shower data shows a good agreement up to 50 GeV. Discrepancies are observed at higher energies. The reasons for these differences are investigated.
△ Less
Submitted 15 April, 2016;
originally announced April 2016.
-
First results of the CALICE SDHCAL technological prototype
Authors:
V. Buridon,
C. Combaret,
L. Caponetto,
R. Eté,
G. Garillot,
G. Grenier,
R. Han,
J. C. Ianigro,
R. Kieffer,
I. Laktineh,
N. Lumb,
H. Mathez,
L. Mirabito,
A. Petrukhin,
A. Steen,
J. Berenguer Antequera,
E. Calvo Alamillo,
M. -C. Fouz,
J. Marin,
J. Puerta-Pelayo,
A. Verdugo,
E. Cortina Gil,
S. Mannai,
S. Cauwenbergh,
M. Tytgat
, et al. (96 additional authors not shown)
Abstract:
The CALICE Semi-Digital Hadronic Calorimeter (SDHCAL) prototype, built in 2011, was exposed to beams of hadrons, electrons and muons in two short periods in 2012 on two different beam lines of the CERN SPS. The prototype with its 48 active layers, made of Glass Resistive Plate Chambers and their embedded readout electronics, was run in triggerless and power-pulsing mode. The performance of the SDH…
▽ More
The CALICE Semi-Digital Hadronic Calorimeter (SDHCAL) prototype, built in 2011, was exposed to beams of hadrons, electrons and muons in two short periods in 2012 on two different beam lines of the CERN SPS. The prototype with its 48 active layers, made of Glass Resistive Plate Chambers and their embedded readout electronics, was run in triggerless and power-pulsing mode. The performance of the SDHCAL during the test beam was found to be very satisfactory with an efficiency exceeding 90% for almost all of the 48 active layers. A linear response (within 5%) and a good energy resolution are obtained for a large range of hadronic energies (5-80GeV) by applying appropriate calibration coefficients to the collected data for both the Digital (Binary) and the Semi-Digital (Multi-threshold) modes of the SDHCAL prototype. The Semi-Digital mode shows better performance at energies exceeding 30GeV
△ Less
Submitted 20 March, 2016; v1 submitted 6 February, 2016;
originally announced February 2016.
-
EAS thermal neutron lateral and temporal distributions
Authors:
Yu. V. Stenkin,
D. M. Gromushkin,
A. A. Petrukhin,
O. B. Shchegolev,
V. I. Stepanov,
V. I. Volchenko,
I. I. Yashin,
E. A. Zadeba
Abstract:
A novel type of EAS array (PRISMA-32) has been constructed on the base of NEVOD-DECOR experiment (MEPhI,Moscow) and is now taking data. It consists of 32 specially designed scintillator en-detectors able to measure two main EAS components: hadrons (n) and electrons (e). First results on thermal neutron lateral as well as temporal distributions are presented. Obtained exponential neutron lateral di…
▽ More
A novel type of EAS array (PRISMA-32) has been constructed on the base of NEVOD-DECOR experiment (MEPhI,Moscow) and is now taking data. It consists of 32 specially designed scintillator en-detectors able to measure two main EAS components: hadrons (n) and electrons (e). First results on thermal neutron lateral as well as temporal distributions are presented. Obtained exponential neutron lateral distributions are consistent with that expected for normal hadron production with exponential transverse momentum distribution. As there are no other experimental data on thermal neutron distributions and so, to compare results with other measurements, we additionally obtained electron lateral distribution function (using the same detectors) and compared it with NKG - function. Recorded neutron temporal distributions are very close to that obtained with data of our previous prototypes.
△ Less
Submitted 7 December, 2015;
originally announced December 2015.
-
Pion and proton showers in the CALICE scintillator-steel analogue hadron calorimeter
Authors:
The CALICE Collaboration,
B. Bilki,
J. Repond,
L. Xia,
G. Eigen,
M. A. Thomson,
D. R. Ward,
D. Benchekroun,
A. Hoummada,
Y. Khoulaki,
S. Chang,
A. Khan,
D. H. Kim,
D. J. Kong,
Y. D. Oh,
G. C. Blazey,
A. Dyshkant,
K. Francis,
J. G. R. Lima,
R. Salcido,
V. Zutshi,
F. Salvatore,
K. Kawagoe,
Y. Miyazaki,
Y. Sudo
, et al. (147 additional authors not shown)
Abstract:
Showers produced by positive hadrons in the highly granular CALICE scintillator-steel analogue hadron calorimeter were studied. The experimental data were collected at CERN and FNAL for single particles with initial momenta from 10 to 80 GeV/c. The calorimeter response and resolution and spatial characteristics of shower development for proton- and pion-induced showers for test beam data and simul…
▽ More
Showers produced by positive hadrons in the highly granular CALICE scintillator-steel analogue hadron calorimeter were studied. The experimental data were collected at CERN and FNAL for single particles with initial momenta from 10 to 80 GeV/c. The calorimeter response and resolution and spatial characteristics of shower development for proton- and pion-induced showers for test beam data and simulations using Geant4 version 9.6 are compared.
△ Less
Submitted 15 March, 2015; v1 submitted 8 December, 2014;
originally announced December 2014.
-
Energy measurement with the SDHCAL prototype
Authors:
Alexey Petrukhin
Abstract:
The SDHCAL prototype that was completed in 2012 was exposed to beams of pions, electrons of different energies at the SPS of CERN for a total time period of 5 weeks. The data are being analyzed within the CALICE Collaboration. However preliminary results indicate that a highly granular hadronic calorimeter conceived for PFA application is also a powerful tool to separate pions from electrons. The…
▽ More
The SDHCAL prototype that was completed in 2012 was exposed to beams of pions, electrons of different energies at the SPS of CERN for a total time period of 5 weeks. The data are being analyzed within the CALICE Collaboration. However preliminary results indicate that a highly granular hadronic calorimeter conceived for PFA application is also a powerful tool to separate pions from electrons. The SDHCAL provides also a very good resolution of hadronic showers energy measurement. A new calibration method that takes into account the degradation of the Glass Resistive Plate Chambers (GRPC) response for runs with rather high particle beam rate is presented.
△ Less
Submitted 27 June, 2014;
originally announced June 2014.
-
The Time Structure of Hadronic Showers in highly granular Calorimeters with Tungsten and Steel Absorbers
Authors:
C. Adloff,
J. -J. Blaising,
M. Chefdeville,
C. Drancourt,
R. Gaglione,
N. Geffroy,
Y. Karyotakis,
I. Koletsou,
J. Prast,
G. Vouters J. Repond,
J. Schlereth,
L. Xia E. Baldolemar,
J. Li,
S. T. Park,
M. Sosebee,
A. P. White,
J. Yu,
G. Eigen,
M. A. Thomson,
D. R. Ward,
D. Benchekroun,
A. Hoummada,
Y. Khoulaki J. Apostolakis,
S. Arfaoui,
M. Benoit
, et al. (188 additional authors not shown)
Abstract:
The intrinsic time structure of hadronic showers influences the timing capability and the required integration time of hadronic calorimeters in particle physics experiments, and depends on the active medium and on the absorber of the calorimeter. With the CALICE T3B experiment, a setup of 15 small plastic scintillator tiles read out with Silicon Photomultipliers, the time structure of showers is m…
▽ More
The intrinsic time structure of hadronic showers influences the timing capability and the required integration time of hadronic calorimeters in particle physics experiments, and depends on the active medium and on the absorber of the calorimeter. With the CALICE T3B experiment, a setup of 15 small plastic scintillator tiles read out with Silicon Photomultipliers, the time structure of showers is measured on a statistical basis with high spatial and temporal resolution in sampling calorimeters with tungsten and steel absorbers. The results are compared to GEANT4 (version 9.4 patch 03) simulations with different hadronic physics models. These comparisons demonstrate the importance of using high precision treatment of low-energy neutrons for tungsten absorbers, while an overall good agreement between data and simulations for all considered models is observed for steel.
△ Less
Submitted 21 July, 2014; v1 submitted 25 April, 2014;
originally announced April 2014.
-
Performance of the first prototype of the CALICE scintillator strip electromagnetic calorimeter
Authors:
CALICE Collaboration,
K. Francis,
J. Repond,
J. Schlereth,
J. Smith,
L. Xia,
E. Baldolemar,
J. Li,
S. T. Park,
M. Sosebee,
A. P. White,
J. Yu,
G. Eigen,
Y. Mikami,
N. K. Watson,
M. A. Thomson,
D. R. Ward,
D. Benchekroun,
A. Hoummada,
Y. Khoulaki,
J. Apostolakis,
A. Dotti,
G. Folger,
V. Ivantchenko,
A. Ribon
, et al. (169 additional authors not shown)
Abstract:
A first prototype of a scintillator strip-based electromagnetic calorimeter was built, consisting of 26 layers of tungsten absorber plates interleaved with planes of 45x10x3 mm3 plastic scintillator strips. Data were collected using a positron test beam at DESY with momenta between 1 and 6 GeV/c. The prototype's performance is presented in terms of the linearity and resolution of the energy measur…
▽ More
A first prototype of a scintillator strip-based electromagnetic calorimeter was built, consisting of 26 layers of tungsten absorber plates interleaved with planes of 45x10x3 mm3 plastic scintillator strips. Data were collected using a positron test beam at DESY with momenta between 1 and 6 GeV/c. The prototype's performance is presented in terms of the linearity and resolution of the energy measurement. These results represent an important milestone in the development of highly granular calorimeters using scintillator strip technology. This technology is being developed for a future linear collider experiment, aiming at the precise measurement of jet energies using particle flow techniques.
△ Less
Submitted 11 June, 2014; v1 submitted 15 November, 2013;
originally announced November 2013.
-
Shower development of particles with momenta from 1 to 10 GeV in the CALICE Scintillator-Tungsten HCAL
Authors:
C. Adloff,
J. -J. Blaising,
M. Chefdeville,
C. Drancourt,
R. Gaglione,
N. Geffroy,
Y. Karyotakis,
I. Koletsou,
J. Prast,
G. Vouters,
J. Repond,
J. Schlereth,
J. Smith,
L. Xia,
E. Baldolemar,
J. Li,
S. T. Park,
M. Sosebee,
A. P. White,
J. Yu,
G. Eigen,
M. A. Thomson,
D. R. Ward,
D. Benchekroun,
A. Hoummada
, et al. (194 additional authors not shown)
Abstract:
Lepton colliders are considered as options to complement and to extend the physics programme at the Large Hadron Collider. The Compact Linear Collider (CLIC) is an $e^+e^-$ collider under development aiming at centre-of-mass energies of up to 3 TeV. For experiments at CLIC, a hadron sampling calorimeter with tungsten absorber is proposed. Such a calorimeter provides sufficient depth to contain hig…
▽ More
Lepton colliders are considered as options to complement and to extend the physics programme at the Large Hadron Collider. The Compact Linear Collider (CLIC) is an $e^+e^-$ collider under development aiming at centre-of-mass energies of up to 3 TeV. For experiments at CLIC, a hadron sampling calorimeter with tungsten absorber is proposed. Such a calorimeter provides sufficient depth to contain high-energy showers, while allowing a compact size for the surrounding solenoid.
A fine-grained calorimeter prototype with tungsten absorber plates and scintillator tiles read out by silicon photomultipliers was built and exposed to particle beams at CERN. Results obtained with electrons, pions and protons of momenta up to 10 GeV are presented in terms of energy resolution and shower shape studies. The results are compared with several GEANT4 simulation models in order to assess the reliability of the Monte Carlo predictions relevant for a future experiment at CLIC.
△ Less
Submitted 13 January, 2014; v1 submitted 14 November, 2013;
originally announced November 2013.
-
Track segments in hadronic showers in a highly granular scintillator-steel hadron calorimeter
Authors:
CALICE Collaboration,
C. Adloff,
J. -J. Blaising,
M. Chefdeville,
C. Drancourt,
R. Gaglione,
N. Geffroy,
Y. Karyotakis,
I. Koletsou,
J. Prast,
G. Vouters,
K. Francis,
J. Repond,
J. Schlereth,
J. Smith,
L. Xia,
E. Baldolemar,
J. Li,
S. T. Park,
M. Sosebee,
A. P. White,
J. Yu,
G. Eigen,
Y. Mikami,
N. K. Watson
, et al. (184 additional authors not shown)
Abstract:
We investigate the three dimensional substructure of hadronic showers in the CALICE scintillator-steel hadronic calorimeter. The high granularity of the detector is used to find track segments of minimum ionising particles within hadronic showers, providing sensitivity to the spatial structure and the details of secondary particle production in hadronic cascades. The multiplicity, length and angul…
▽ More
We investigate the three dimensional substructure of hadronic showers in the CALICE scintillator-steel hadronic calorimeter. The high granularity of the detector is used to find track segments of minimum ionising particles within hadronic showers, providing sensitivity to the spatial structure and the details of secondary particle production in hadronic cascades. The multiplicity, length and angular distribution of identified track segments are compared to GEANT4 simulations with several different shower models. Track segments also provide the possibility for in-situ calibration of highly granular calorimeters.
△ Less
Submitted 29 July, 2013; v1 submitted 30 May, 2013;
originally announced May 2013.
-
The SPHINX spectrometer
Authors:
SPHINX Collaboration,
Yu. Antipov,
A. Artamonov,
V. Batarin,
V. Bezzubov,
O. Eroshin,
S. Golovkin,
Yu. Gorin,
V. Govorun,
A. Isaev,
V. Kolganov,
A. Konstantinov,
A. Kozhevnikov,
V. Kubarovsky,
V. Kurshetsov,
A. Kushnirenko,
L. Landsberg,
V. Leontiev,
G. Lomkatsi,
M. Medinskiy,
V. Medovikov,
V. Molchanov,
V. Morozova,
V. Mukhin,
A. Nilov
, et al. (13 additional authors not shown)
Abstract:
The paper describes the SPHINX facility which includes a wide-aperture magnetic spectrometer with scintillation counters and hodoscopes, proportional chambers and drift tubes, multichannel electromagnetic and hadron calorimeters, a guard system, a RICH velocity spectrometer and a hodoscopical threshold Cherenkov detector for the identification of charged secondary particles. The SPHINX spectrome…
▽ More
The paper describes the SPHINX facility which includes a wide-aperture magnetic spectrometer with scintillation counters and hodoscopes, proportional chambers and drift tubes, multichannel electromagnetic and hadron calorimeters, a guard system, a RICH velocity spectrometer and a hodoscopical threshold Cherenkov detector for the identification of charged secondary particles. The SPHINX spectrometer, in its last modification, had the possibility to record 3000-4000 trigger events per an accelerator burst. The spectrometer was used during the last decade in experiments with the 70GeV proton beam of the IHEP accelerator U-70.
△ Less
Submitted 26 December, 2005; v1 submitted 5 April, 2005;
originally announced April 2005.