Showing 1–14 of 14 results for author: Petrelli, M

Sulfur and REE zoning in apatite: The example of the Colli Albani magmatic system

Authors: Alessandro Fabbrizio, Mario Gaeta, Michael R. Carroll, Maurizio Petrelli

Abstract: We investigate the distribution of major and trace elements in apatite crystals hosted in granular alkaline rocks composed mainly of leucite and clinopyroxene, representative of the hypabyssal crystallization of a magma body in the Quaternary ultra-potassic Colli Albani Volcanic District (CAVD), which was emplaced into thick limestone units along the Tyrrhenian margin of Italy. Results show that t… ▽ More We investigate the distribution of major and trace elements in apatite crystals hosted in granular alkaline rocks composed mainly of leucite and clinopyroxene, representative of the hypabyssal crystallization of a magma body in the Quaternary ultra-potassic Colli Albani Volcanic District (CAVD), which was emplaced into thick limestone units along the Tyrrhenian margin of Italy. Results show that the analyzed crystals are the SrO-richest (up to 4.6 wt%) fluorapatite (F =2.6-3.7 wt%) of the Italian alkaline rocks. The strontium enrichment is caused by the lack of other Sr-compatible mineral phases, such as plagioclase, alkali feldspar and melilite, in these leucite- and clinopyroxene-bearing rocks. The studied samples show core-rim zoning with rims enriched in Si, S, and REE whereas the cores are enriched in Ca and P. The LREE-oxides contents of apatite, reaching 4.2 wt%, represent more than 95% of the total REE budget; SiO2 contents range from 1.3 to 3.6 wt%, and SO3 concentrations between 0.6 and 1.4 wt%. △ Less

Submitted 28 December, 2018; originally announced December 2018.

Tracking plumbing system dynamics at the Campi Flegrei caldera, Italy: High-resolution trace element map** of the Astroni crystal cargo

Authors: Rebecca L. Astbury, Maurizio Petrelli, Teresa Ubide, Michael J. Stock, Ilenia Arienzo, Massimo D'Antonio, Diego Perugini

Abstract: The Campi Flegrei caldera (southern Italy) is one of the most hazardous volcanic systems on Earth, having produced >60 eruptions in the past 15 ka. The caldera remains active and its potential for future eruptions is high, posing a danger to the dense population living nearby. Despite this, our understanding of pre-eruptive processes and the architecture of the sub-volcanic system are poorly const… ▽ More The Campi Flegrei caldera (southern Italy) is one of the most hazardous volcanic systems on Earth, having produced >60 eruptions in the past 15 ka. The caldera remains active and its potential for future eruptions is high, posing a danger to the dense population living nearby. Despite this, our understanding of pre-eruptive processes and the architecture of the sub-volcanic system are poorly constrained. Here, we combine established petrological techniques, geothermobarometric evaluation, and high resolution trace element crystal map**, to present a multifaceted, coherent reconstruction of the complex pre eruptive dynamics and eruption timescales of Astroni volcano located in the eastern sector of Campi Flegrei caldera. The Astroni volcano is an important case study for investigating plumbing system processes and dynamics at Campi Flegrei caldera because it produced the most recent (ca. 4 ka ago) Plinian eruption within the caldera (Astroni 6); current long-term forecasting studies postulate that a similar sized event in this location is a probable future scenario. Geothermobarometric results indicate interaction between an evolved, shallow magma chamber, and a less evolved, deeper pocket of magma, in agreement with previous studies focused on the Astroni 6 eruption products. In addition, a range of textural and trace element zoning patterns point to a complex evolution of both magmas prior to their subsequent interaction. High resolution trace element crystal maps reveal discrete zonations in compatible elements. These zonations, combined with knowledge of Kfeldspar growth rates, highlight a recharge event in the shallow plumbing system a few hours to days before the Astroni 6 eruption. △ Less

Submitted 28 December, 2018; originally announced December 2018.

Titanite-bearing calc-silicate rocks constrain timing, duration and magnitude of metamorphic CO2 degassing in the Himalayan belt

Authors: Giulia Rapa, Chiara Groppo, Franco Rolfo, Maurizio Petrelli, Pietro Mosca, Diego Perugini

Abstract: The pressure, temperature, and timing (PTt) conditions at which CO2 was produced during the Himalayan prograde metamorphism have been constrained, focusing on the most abundant calcsilicate rock type in the Himalaya. A detailed petrological modeling of a clinopyroxene, scapolite, Kfeldspar, plagioclase, quartz, calcite calcsilicate rock allowed the identification and full characterization, for the… ▽ More The pressure, temperature, and timing (PTt) conditions at which CO2 was produced during the Himalayan prograde metamorphism have been constrained, focusing on the most abundant calcsilicate rock type in the Himalaya. A detailed petrological modeling of a clinopyroxene, scapolite, Kfeldspar, plagioclase, quartz, calcite calcsilicate rock allowed the identification and full characterization, for the first time, of different metamorphic reactions leading to the simultaneous growth of titanite and CO2 production. The results of thermometric determinations (Zr in Ttn thermometry) and UPb geochronological analyses suggest that, in the studied lithology, most titanite grains grew during two nearly consecutive episodes of titanite formation: a nearpeak event at 730 740 °C, 10 kbar, 30 26 Ma, and a peak event at 740 765 °C, 10.5 kbar, 25 20 Ma. Both episodes of titanite growth are correlated with specific CO2producing reactions and constrain the timing, duration and PT conditions of the main CO2producing events, as well as the amounts of CO2 produced (1.4 1.8 wt percent of CO2). A firstorder extrapolation of such CO2 amounts to the orogen scale provides metamorphic CO2 fluxes ranging between 1.4 and 19.4 Mt yr; these values are of the same order of magnitude as the presentday CO2 fluxes degassed from spring waters located along the Main Central Thrust. We suggest that these metamorphic CO2 fluxes should be considered in any future attempts of estimating the global budget of non volcanic carbon fluxes from the lithosphere. △ Less

Submitted 26 December, 2018; originally announced December 2018.

Evidence of Permian magmatism in the Alpi Apuane metamorphic complex (Northern Apennines, Italy): New hints for the geological evolution of the basement of the Adria plate

Authors: Simone Vezzoni, Cristian Biagioni, Massimo D'Orazio, Diego Pieruccioni, Yuri Galanti, Maurizio Petrelli, Giancarlo Molli

Abstract: The occurrence of metavolcanic rocks within the Paleozoic basement of the Alpi Apuane metamorphic complex has been known since long time. Among them, some massive porphyritic tourmaline-bearing rocks crop** out in the southern sector of the Alpi Apuane present some distinctive and peculiar features, differing from the better known middle Ordovician metarhyolites of the Porfiroidi e scisti porfir… ▽ More The occurrence of metavolcanic rocks within the Paleozoic basement of the Alpi Apuane metamorphic complex has been known since long time. Among them, some massive porphyritic tourmaline-bearing rocks crop** out in the southern sector of the Alpi Apuane present some distinctive and peculiar features, differing from the better known middle Ordovician metarhyolites of the Porfiroidi e scisti porfirici Fm. The porphyritic tourmaline-bearing rocks belong to the recently proposed Fornovolasco Metarhyolite Fm. They are granular to porphyritic, with phenocrysts of quartz (often with magmatic embayment), pseudomorphosed feldspars, and mica (both biotite and muscovite), in a groundmass formed by quartz, white mica, albite, and Kfeldspar. Tourmaline (schorl-dravite in composition) is an abundant accessory mineral, in some cases forming cm-sized spots. The studied rocks plot into the rhyolite field of the Total Alkali vs Silica classification diagram. They show a peraluminous nature, having an Alumina Saturation Index ranging from 1.3 and 3.2. Their trace-element signature is that typical of highly evolved orogenic magmas. Laser ablationICPMS UPb datings on zircon suggest a Permian crystallization age (weighted average ages of the four samples ranging from 292 and 271 Ma), thus relating these rocks to a post-Variscan magmatism. This new dating represents the very first evidence of a Permian magmatism in the pre-Triassic basement of the Northern Apennines. The potential relationships between Permian felsic magmatism and the ore genesis in the Alpi Apuane metamorphic complex are also discussed. △ Less

Submitted 26 December, 2018; originally announced December 2018.

The effect of diffusive re-equilibration time on trace element partitioning between alkali feldspar and trachytic melts

Authors: Fabio Arzilli, Alessandro Fabbrizio, M. W. Schmidt, Maurizio Petrelli, M Maimaiti, D. B. Dingwell, E. Paris, M. Burton, M. Carroll

Abstract: We present new experimental data on major and trace element partition coefficients between alkali feldspar and trachytic melt. Experiments were conducted at 500 MPa, 870 890 °C to investigate through short disequilibrium and long near equilibrium experiments the influence of diffusive re-equilibration on trace element partitioning during crystallization. Our data show that Ba and Sr behave compati… ▽ More We present new experimental data on major and trace element partition coefficients between alkali feldspar and trachytic melt. Experiments were conducted at 500 MPa, 870 890 °C to investigate through short disequilibrium and long near equilibrium experiments the influence of diffusive re-equilibration on trace element partitioning during crystallization. Our data show that Ba and Sr behave compatibly, and their partition coefficients are influenced by re-equilibration time, orthoclase (Or) content, growth rate and cation order-disorder. High field strength elements (HFSE) and rare earth elements (except Eu) are strongly incompatible, but alkali feldspar efficiently fractionates light (LREE) from heavy rare earth elements (HREE). Our crystallization experiments reveal a strong influence of disequilibrium crystal growth on the partitioning of Ba and Sr. In particular, short-duration experiments show that rapid alkali feldspar crystal growth after nucleation, promotes disordered growth and less selectivity in the partitioning of compatible trace elements that easily enter the crystal lattice (e.g., Ba and Sr).... △ Less

Submitted 26 December, 2018; originally announced December 2018.

Diffusive exchange of trace elements between alkaline melts: implications for element fractionation and timescale estimations during magma mixing

Authors: Diego González-García, Maurizio Petrelli, Harald Behrens, Francesco Vetere, Lennart A. Fischer, Daniele Morgavi, Diego Perugini

Abstract: The diffusive exchange of 30 trace elements during the interaction of natural mafic and silicic alkaline melts was experimentally studied at conditions relevant to shallow magmatic systems. In detail, a set of 12 diffusion couple experiments have been performed between natural shoshonitic and rhyolitic melts from the Vulcano Island (Aeolian archipelago, Italy) at a temperature of 1200 °C, pressure… ▽ More The diffusive exchange of 30 trace elements during the interaction of natural mafic and silicic alkaline melts was experimentally studied at conditions relevant to shallow magmatic systems. In detail, a set of 12 diffusion couple experiments have been performed between natural shoshonitic and rhyolitic melts from the Vulcano Island (Aeolian archipelago, Italy) at a temperature of 1200 °C, pressures from 50 to 500 MPa, and water contents ranging from nominally dry to ca. 2 wt. %. Concentration-distance profiles, measured by Laser Ablation ICP-MS, highlight different behaviours, and trace elements were divided into two groups: (1) elements with normal diffusion profiles (13 elements, mainly low field strength and transition elements), and (2) elements showing uphill diffusion (17 elements including Y, Zr, Nb, Pb and rare earth elements, except Eu). For the elements showing normal diffusion profiles, chemical diffusion coefficients were estimated using a concentration-dependent evaluation method, and values are given at four intermediate compositions (SiO2 equal to 58, 62, 66 and 70 wt. %, respectively). A general coupling of diffusion coefficients to silica diffusivity is observed, and variations in systematics are observed between mafic and silicic compositions. Results show that water plays a decisive role on diffusive rates in the studied conditions, producing an enhancement between 0.4 and 0.7 log units per 1 wt.% of added H2O. Particularly notable is the behaviour of the trivalent-only REEs (La to Nd and Gd to Lu), with strong uphill diffusion minima, diminishing from light to heavy REEs. Modelling of REE profiles by a modified effective binary diffusion model indicates that activity gradients induced by the SiO2 concentration contrast are responsible for their development, inducing a transient partitioning of REEs towards the shoshonitic melt. △ Less

Submitted 5 June, 2018; originally announced June 2018.

Comments: 57 pages, 12 figures, 5 tables

Journal ref: Geochimica et Cosmochimica Acta, 233, 95-114, 2018

Experimental constraints on the rheology, eruption and emplacement dynamics of analog lavas comparable to Mercury's northern volcanic plains

Authors: Francesco Vetere, Stefano Rossi, Olivier Namur, Daniele Morgavi, Valeria Misiti, Paolo Mancinelli, Maurizio Petrelli, Cristina Pauselli, Diego Perugini

Abstract: We present new viscosity measurements of a synthetic silicate system considered an analogue for the lava erupted on the surface of Mercury. In particular, we focus on the northern volcanic plains (NVP), which correspond to the largest lava flows on Mercury and possibly in the Solar System. High-temperature viscosity measurements were performed at both superliquidus (up to 1736 K) and subliquidus c… ▽ More We present new viscosity measurements of a synthetic silicate system considered an analogue for the lava erupted on the surface of Mercury. In particular, we focus on the northern volcanic plains (NVP), which correspond to the largest lava flows on Mercury and possibly in the Solar System. High-temperature viscosity measurements were performed at both superliquidus (up to 1736 K) and subliquidus conditions (1569-1502 K) to constrain the viscosity variations as a function of crystallinity (from 0 to 28\%) and shear rate (from 0.1 to 5 s 1). Melt viscosity shows moderate variations (4-16 Pa s) in the temperature range of 1736-1600 K. Experiments performed below the liquidus temperature show an increase in viscosity as shear rate decreases from 5 to 0.1 s 1, resulting in a shear thinning behavior, with a decrease in viscosity of 1 log unit. The low viscosity of the studied composition may explain the ability of NVP lavas to cover long distances, on the order of hundreds of kilometers in a turbulent flow regime. Using our experimental data we estimate that lava flows with thickness of 1, 5, and 10 m are likely to have velocities of 4.8, 6.5, and 7.2 m/s, respectively, on a 5 degree ground slope. Numerical modeling incorporating both the heat loss of the lavas and its possible crystallization during emplacement allows us to infer that high effusion rates (>10,000 m3/s) are necessary to cover the large distances indicated by satellite data from the MErcury Surface, Space ENvironment, GEochemistry, and Ranging spacecraft. △ Less

Submitted 16 August, 2017; originally announced August 2017.

Journal ref: J. Geophys. Res. Planets, 122, doi:10.1002/2016JE005181

Exponential Decay Of Concentration Variance During Magma Mixing: Robustness Of A Volcanic Chronometer And Implications For The Homogenization Of Chemical Heterogeneities In Magmatic Systems

Authors: Stefano Rossi, Maurizio Petrelli, Daniele Morgavi, Diego González-García, Lennart A. Fischer, Francesco Vetere, Diego Perugini

Abstract: The mixing of magmas is a fundamental process in the Earth system causing extreme compositional variations in igneous rocks. This process can develop with different intensities both in space and time, making the interpretation of compositional patterns in igneous rocks a petrological challenge. As a time-dependent process, magma mixing has been suggested to preserve information about the time elap… ▽ More The mixing of magmas is a fundamental process in the Earth system causing extreme compositional variations in igneous rocks. This process can develop with different intensities both in space and time, making the interpretation of compositional patterns in igneous rocks a petrological challenge. As a time-dependent process, magma mixing has been suggested to preserve information about the time elapsed between the injection of a new magma into sub-volcanic magma chambers and eruptions. This allowed the use of magma mixing as an additional volcanological tool to infer the mixing-to-eruption timescales. In spite of the potential of magma mixing processes to provide information about the timing of volcanic eruptions its statistical robustness is not yet established. This represents a prerequisite to apply reliably this conceptual model. Here, new chaotic magma mixing experiments were performed at different times using natural melts. The degree of reproducibility of experimental results was tested repeating one experiment at the same starting conditions and comparing the compositional variability. We further tested the robustness of the statistical analysis by randomly removing from the analysed dataset a progressively increasing number of samples. Results highlight the robustness of the method to derive empirical relationships linking the efficiency of chemical exchanges and mixing time. These empirical relationships remain valid by removing up to 80% of the analytical determinations. Experimental results were applied to constrain the homogenization time of chemical heterogeneities in natural magmatic system during mixing. The calculations show that, when the mixing dynamics generate millimetre thick filaments, homogenization timescales of the order of a few minutes are to be expected. △ Less

Submitted 30 June, 2017; originally announced June 2017.

High spatial resolution trace element determination of geological samples by laser ablation quadrupole plasma mass spectrometry: implications for glass analysis in volcanic products

Authors: Maurizio Petrelli, Kathrin Laeger, Diego Perugini

Abstract: Increasing the spatial resolution of Laser Ablation Inductively Coupled Plasma Mass Spectrometry (LA-ICP-MS) is a challenge in microanalysis of geological samples. Smaller sizes for the laser beam will allow for (1) high resolution determination of trace element compositions, (2) accurate estimation of crystal/melt partition coefficients, (3) detailed characterization of diffusion profiles, and (4… ▽ More Increasing the spatial resolution of Laser Ablation Inductively Coupled Plasma Mass Spectrometry (LA-ICP-MS) is a challenge in microanalysis of geological samples. Smaller sizes for the laser beam will allow for (1) high resolution determination of trace element compositions, (2) accurate estimation of crystal/melt partition coefficients, (3) detailed characterization of diffusion profiles, and (4) analysis of fine volcanic glasses. Here, we report about the figures of merit for LA-ICP Quadrupole MS down to a spatial resolution of 5 μm. This study highlights the possibility to achieve suitable limits of detection, accuracy and precision for geological samples even at spatial resolutions of the order of 5 μm. At a beam size of 15 μm precision (measured as one sigma) and accuracy (expressed as relative deviation from the reference value) are of the order of 10%. At a smaller beam size of 8um, precision decreases to 15% for concentration above 1.7 μg g-1. As the beam size is decreased to ~5 μm, precision declines to about 15% and 20% for concentrations above 10 μg g-1 using 42Ca and 29Si as internal standard, respectively. Accuracy is better or equal to 10% and 13 % at beam sizes of 15 and 10 μm respectively. When the spatial resolution is increased to 8 μm, accuracy remains better than 15% and 20% for 42Ca and 29Si as internal standard, respectively. We employed such high-resolution techniques to volcanic glasses in ash particles of the 2010 Eyjafjallajökull eruption. Our results are well consistent with the previously reported data obtained at lower spatial resolution, supporting the reliability of the method. △ Less

Submitted 30 June, 2017; originally announced June 2017.

Journal ref: Geosciences Journal, Volume 20, Issue 6, 1 December 2016, Pages 851-863

Solving petrological problems through machine learning: the study case of tectonic discrimination using geochemical and isotopic data

Authors: Maurizio Petrelli, Diego Perugini

Abstract: Machine learning methods are evaluated to study the intriguing and debated topic of discrimination among different tectonic environments using geochemical and isotopic data. Volcanic rocks characterized by a whole geochemical signature of major elements (SiO2, TiO2, Al2O3, Fe2O3T, CaO, MgO, Na2O, K2O), selected trace elements (Sr, Ba, Rb, Zr, Nb, La, Ce, Nd, Hf, Sm, Gd, Y, Yb, Lu, Ta, Th) and isot… ▽ More Machine learning methods are evaluated to study the intriguing and debated topic of discrimination among different tectonic environments using geochemical and isotopic data. Volcanic rocks characterized by a whole geochemical signature of major elements (SiO2, TiO2, Al2O3, Fe2O3T, CaO, MgO, Na2O, K2O), selected trace elements (Sr, Ba, Rb, Zr, Nb, La, Ce, Nd, Hf, Sm, Gd, Y, Yb, Lu, Ta, Th) and isotopes (206Pb/204Pb, 207Pb/204Pb, 208Pb/204Pb, 87Sr/86Sr and 143Nd/144Nd) have been extracted from open-access and comprehensive petrological databases (i.e. PetDB and GEOROC). The obtained dataset has been analyzed using support vector machines, a set of supervised machine learning methods, which are considered particularly powerful in classification problems. Results from the application of the machine learning methods show that the combined use of major, trace elements and isotopes allow associating the geochemical composition of rocks to the relative tectonic setting with high classification scores (93%, on average). The lowest scores are recorded from volcanic rocks deriving from back-arc basins (65%). All the other tectonic settings display higher classification scores, with oceanic islands reaching values up to 99%. Results of this study could have a significant impact in other petrological studies potentially opening new perspectives for petrologists and geochemists. Other examples of applications include the development of more robust geo-thermometers and geo-barometers and the recognition of volcanic sources for tephra layers in tephro-chronological studies. △ Less

Submitted 30 June, 2017; originally announced June 2017.

Journal ref: Contributions to Mineralogy and Petrology - Volume 171, Issue 10, 1 October 2016, Article number 81

Water-enhanced interdiffusion of major elements between natural shoshonite and high-K rhyolite melts

Authors: Diego González-García, Harald Behrens, Maurizio Petrelli, Francesco Vetere, Daniele Morgavi, Chao Zhang, Diego Perugini

Abstract: The interdiffusion of six major elements (Si, Ti, Fe, Mg, Ca, K) between natural shoshonite and a high-K calc-alkaline rhyolite (Vulcano island, Aeolian archipelago, Italy) has been experimentally measured by the diffusion couple technique at 1200°C, pressures from 50 to 500 MPa and water contents from 0.3 (nominally dry) to 2 wt%. The experiments were carried out in an internally heated pressure… ▽ More The interdiffusion of six major elements (Si, Ti, Fe, Mg, Ca, K) between natural shoshonite and a high-K calc-alkaline rhyolite (Vulcano island, Aeolian archipelago, Italy) has been experimentally measured by the diffusion couple technique at 1200°C, pressures from 50 to 500 MPa and water contents from 0.3 (nominally dry) to 2 wt%. The experiments were carried out in an internally heated pressure vessel, and major element profiles were later acquired by electron probe microanalysis. The concentration-distance profiles are evaluated using a concentration-dependent diffusivity approach. Effective binary diffusion coefficients for four intermediate silica contents are obtained by the Sauer-Freise modified Boltzmann-Matano method. At the experimental temperature and pressures, the diffusivity of all studied elements notably increases with dissolved H2O content. Particularly, diffusion is up to 1.4 orders of magnitude faster in a melt containing 2 wt.% H2O than in nominally dry melts. This effect is slightly enhanced in the more mafic compositions. Uphill diffusion was observed for Al, while all other elements can be described by the concept of effective binary interdiffusion. Ti is the slowest diffusing element through all experimental conditions and compositions, followed by Si. Fe, Mg, Ca and K diffuse at similar rates but always more rapidly than Si and Ti. This trend suggests a strong coupling between melt components. Since effects of composition (including water content) are dominant, a pressure effect on diffusion cannot be clearly resolved in the experimental pressure range. △ Less

Submitted 10 June, 2017; originally announced June 2017.

Combining machine learning techniques, microanalyses and large geochemical datasets for tephrochronological studies in complex volcanic areas: new age constraints for the Pleistocene magmatism of Central Italy

Authors: Maurizio Petrelli, Roberto Bizzarri, Daniele Morgavi, Angela Baldanza, Diego Perugini

Abstract: Characterization, correlation and provenance determination of tephra samples in sedimentary sections (tephrochronological studies) are powerful tools for establishing ages of depositional events, volcanic eruptions, and tephra dispersion. Despite the large literature and the advancements in this research field, the univocal attribution of tephra deposits to specific volcanic sources remains too of… ▽ More Characterization, correlation and provenance determination of tephra samples in sedimentary sections (tephrochronological studies) are powerful tools for establishing ages of depositional events, volcanic eruptions, and tephra dispersion. Despite the large literature and the advancements in this research field, the univocal attribution of tephra deposits to specific volcanic sources remains too often elusive. In this contribution, we test the application of a machine learning technique named Support Vector Machine to attempt shedding new light upon tephra deposits related to one of the most complex and debated volcanic regions on Earth: the Pliocene-Pleistocene magmatism in Italy. The machine learning algorithm was trained using one of the most comprehensive global petrological databases (GEOROC); 17 chemical elements including major and selected trace elements were chosen as input parameters. We first show the ability of support vector machines in discriminating among different Pliocene-Pleistocene volcanic provinces in Italy and then apply the same methodology to determine the volcanic source of tephra samples occurring in the Caio outcrop, an Early Pleistocene sedimentary section located in Central Italy. △ Less

Submitted 23 January, 2017; originally announced January 2017.

Comments: to be published in Quaternary Geochronology

MSC Class: 86-04

Quantifying magma mixing with the Shannon entropy: application to simulations and experiments

Authors: D. Perugini, C. P. De Campos, M. Petrelli, D. Morgavi, F. P. Vetere, D. B. Dingwell

Abstract: We introduce a new quantity to petrology, the Shannon entropy, as a tool for quantifying mixing as well as the rate of production of hybrid compositions in the mixing system. The Shannon entropy approach is applied to time series numerical simulations and high-temperature experiments performed with natural melts. We note that in both cases the Shannon entropy increases linearly during the initial… ▽ More We introduce a new quantity to petrology, the Shannon entropy, as a tool for quantifying mixing as well as the rate of production of hybrid compositions in the mixing system. The Shannon entropy approach is applied to time series numerical simulations and high-temperature experiments performed with natural melts. We note that in both cases the Shannon entropy increases linearly during the initial stages of mixing and then saturates toward constant values. Furthermore, chemical elements with different mobilities display different rates of increase of the Shannon entropy. This indicates that the hybrid composition for the different elements is attained at different times generating a wide range of spatio-compositional domains which further increase the apparent complexity of the mixing process. Results from the application of the Shannon entropy analysis are compared with the concept of Relaxation of Concentration Variance (RCV), a measure recently introduced in petrology to quantify chemical exchanges during magma mixing. We derive a linear expression relating the change of concentration variance during mixing and the Shannon entropy. We show that the combined use of Shannon entropy and RCV provides the most complete information about the space and time complexity of magma mixing. As a consequence, detailed information about this fundamental petrogenetic and volcanic process can be gathered. In particular, the Shannon entropy can be used as complement to the RCV method to quantify the mobility of chemical elements in magma mixing systems, to obtain information about the rate of production of compositional heterogeneities, and to derive empirical relationships linking the rate of chemical exchanges between interacting magmas and mixing time. △ Less

Submitted 14 September, 2016; originally announced September 2016.

Journal ref: LITHOS, 2015, Volume 236, p. 299-310

Power Spectrum Analyses of Nuclear Decay Rates

Authors: D. Javorsek II, P. A. Sturrock, R. N. Lasenby, A. N. Lasenby, J. B. Buncher, E. Fischbach, J. T. Gruenwald, A. W. Hoft, T. J. Horan, J. H. Jenkins, J. L. Kerford, R. H. Lee, A. Longman, J. J. Mattes, B. L. Morreale, D. B. Morris, R. N. Mudry, J. R. Newport, D. O'Keefe, M. A. Petrelli, M. A. Silver, C. A. Stewart, B. Terry

Abstract: We provide the results from a spectral analysis of nuclear decay data displaying annually varying periodic fluctuations. The analyzed data were obtained from three distinct data sets: 32Si and 36Cl decays reported by an experiment performed at the Brookhaven National Laboratory (BNL), 56Mn decay reported by the Children's Nutrition Research Center (CNRC), but also performed at BNL, and 226Ra decay… ▽ More We provide the results from a spectral analysis of nuclear decay data displaying annually varying periodic fluctuations. The analyzed data were obtained from three distinct data sets: 32Si and 36Cl decays reported by an experiment performed at the Brookhaven National Laboratory (BNL), 56Mn decay reported by the Children's Nutrition Research Center (CNRC), but also performed at BNL, and 226Ra decay reported by an experiment performed at the Physikalisch-Technische Bundesanstalt (PTB) in Germany. All three data sets exhibit the same primary frequency mode consisting of an annual period. Additional spectral comparisons of the data to local ambient temperature, atmospheric pressure, relative humidity, Earth-Sun distance, and their reciprocals were performed. No common phases were found between the factors investigated and those exhibited by the nuclear decay data. This suggests that either a combination of factors was responsible, or that, if it was a single factor, its effects on the decay rate experiments are not a direct synchronous modulation. We conclude that the annual periodicity in these data sets is a real effect, but that further study involving additional carefully controlled experiments will be needed to establish its origin. △ Less

Submitted 6 July, 2010; originally announced July 2010.

Journal ref: Astropart.Phys.34:173-178,2010