-
Fully invertible hyperbolic neural networks for segmenting large-scale surface and sub-surface data
Authors:
Bas Peters,
Eldad Haber,
Keegan Lensink
Abstract:
The large spatial/temporal/frequency scale of geoscience and remote-sensing datasets causes memory issues when using convolutional neural networks for (sub-) surface data segmentation. Recently developed fully reversible or fully invertible networks can mostly avoid memory limitations by recomputing the states during the backward pass through the network. This results in a low and fixed memory req…
▽ More
The large spatial/temporal/frequency scale of geoscience and remote-sensing datasets causes memory issues when using convolutional neural networks for (sub-) surface data segmentation. Recently developed fully reversible or fully invertible networks can mostly avoid memory limitations by recomputing the states during the backward pass through the network. This results in a low and fixed memory requirement for storing network states, as opposed to the typical linear memory growth with network depth. This work focuses on a fully invertible network based on the telegraph equation. While reversibility saves the major amount of memory used in deep networks by the data, the convolutional kernels can take up most memory if fully invertible networks contain multiple invertible pooling/coarsening layers. We address the explosion of the number of convolutional kernels by combining fully invertible networks with layers that contain the convolutional kernels in a compressed form directly. A second challenge is that invertible networks output a tensor the same size as its input. This property prevents the straightforward application of invertible networks to applications that map between different input-output dimensions, need to map to outputs with more channels than present in the input data, or desire outputs that decrease/increase the resolution compared to the input data. However, we show that by employing invertible networks in a non-standard fashion, we can still use them for these tasks. Examples in hyperspectral land-use classification, airborne geophysical surveying, and seismic imaging illustrate that we can input large data volumes in one chunk and do not need to work on small patches, use dimensionality reduction, or employ methods that classify a patch to a single central pixel.
△ Less
Submitted 30 June, 2024;
originally announced July 2024.
-
Inverting airborne electromagnetic data with machine learning
Authors:
Michael S. McMillan,
Bas Peters,
Ophir Greif,
Paulina Wozniakowska,
Eldad Haber
Abstract:
This study focuses on inverting time-domain airborne electromagnetic data in 2D by training a neural-network to understand the relationship between data and conductivity, thereby removing the need for expensive forward modeling during the inversion process. Instead the forward modeling is completed in the training stage, where training models are built before calculating 3D forward modeling traini…
▽ More
This study focuses on inverting time-domain airborne electromagnetic data in 2D by training a neural-network to understand the relationship between data and conductivity, thereby removing the need for expensive forward modeling during the inversion process. Instead the forward modeling is completed in the training stage, where training models are built before calculating 3D forward modeling training data. The method relies on training data being similar to the field dataset of choice, therefore, the field data was first inverted in 1D to get an idea of the expected conductivity distribution. With this information, $ 10,000 $ training models were built with similar conductivity ranges, and the research shows that this provided enough information for the network to produce realistic 2D inversion models over an aquifer-bearing region in California. Once the training was completed, the actual inversion time took only a matter of seconds on a generic laptop, which means that if future data was collected in this region it could be inverted in near real-time. Better results are expected by increasing the number of training models and eventually the goal is to extend the method to 3D inversion.
△ Less
Submitted 28 June, 2024;
originally announced July 2024.
-
Experimental study of second sound quench detection for superconducting cavities
Authors:
Juliette Plouin,
Bertrand Baudouy,
Aurélien Four,
Jean-Pierre Charrier,
Luc Maurice,
Jorge Novo,
Benedikt Peters,
Kitty Liao
Abstract:
Superconducting RF cavities are used in particle accelerators to provide energy to the particle beam. Such cavities are mostly fabricated in niobium and often operated in superfluid helium. One of their limits of operation is the appearance of a local quench, initiated by a local field enhancement due to a defect, which leads to a normal conducting transition of the cavity. Localizing the quench a…
▽ More
Superconducting RF cavities are used in particle accelerators to provide energy to the particle beam. Such cavities are mostly fabricated in niobium and often operated in superfluid helium. One of their limits of operation is the appearance of a local quench, initiated by a local field enhancement due to a defect, which leads to a normal conducting transition of the cavity. Localizing the quench area can be achieved with temperature map** systems. Another method is the use of second sound wave propagation in superfluid helium. Measuring the time of propagation of these waves from quench location to special sensors, called Oscillating Superleak Transducers (OSTs), and using their well-known velocity should allow trilateration. However, most of experimental measurements on cavities show "premature signals", i.e. the second sound signals arrive earlier on the OSTs than expected. This paper presents several quench experiments on cavities equipped with OSTs and temperature map** quench detection systems. Two hypotheses can explain the observed premature signals. The first one assesses faster propagation in helium. An experimental setup has been developed for testing this hypothesis, where second sound is created by a localized heater in a controlled environment up to 4.3 kW/cm2 and 2.8 J. Premature signals could not be verified in this setup. A second hypothesis based on a simple model including several processes in niobium and second sound propagation in helium is discussed. The model improves significantly the prediction of the times of arrival of the second sound waves. The overall study shows that the processes in niobium play a prominent role in the second sound detection for superconducting cavities.
△ Less
Submitted 9 April, 2024;
originally announced April 2024.
-
A general model and toolkit for the ionization of three or more electrons in strongly driven molecules using an effective Coulomb potential for the interaction between bound electrons
Authors:
Georgios Petros Katsoulis,
Matthew Benjamin Peters,
Agapi Emmanouilidou
Abstract:
We formulate a general three-dimensional semiclassical model for the study of correlated multielectron escape during fragmentation of molecules driven by intense infrared laser pulses, while fully accounting for the magnetic field of the laser pulse. We do so in the context of triple ionization of strongly driven HeH$_{2}^{+}$. Our model fully accounts for the singularity in the Coulomb potentials…
▽ More
We formulate a general three-dimensional semiclassical model for the study of correlated multielectron escape during fragmentation of molecules driven by intense infrared laser pulses, while fully accounting for the magnetic field of the laser pulse. We do so in the context of triple ionization of strongly driven HeH$_{2}^{+}$. Our model fully accounts for the singularity in the Coulomb potentials of a recolliding electron with the core and a bound electron with the core as well as for the interaction of a recolliding with a bound electron. To avoid artificial autoionization, our model employs effective potentials to treat the interaction between bound electrons. We focus on triple and double ionization as well as frustrated triple and frustrated double ionization. In these processes, we identify and explain the main features of the sum of the kinetic energies of the final ion fragments.
We find that frustrated double ionization is a major ionization process, and we identify the different channels and hence different final fragments that are obtained through frustrated double ionization. Also, we discuss the differences between frustrated double and triple ionization.
△ Less
Submitted 29 November, 2023;
originally announced November 2023.
-
Singularity in electron-core potential as a gateway to accurate multi-electron ionization spectra in strongly driven atoms
Authors:
Agapi Emmanouilidou,
Matthew Benjamin Peters,
Georgios Petros Katsoulis
Abstract:
We demonstrate a general three-dimensional semiclassical model as a powerful technique for the study of correlated multi-electron escape in atoms driven by infrared laser pulses at intensities where electron-electron correlation prevails. We do so in the context of triple ionization of strongly driven Ne. We show that a drawback of other current quantum mechanical and classical models of triple io…
▽ More
We demonstrate a general three-dimensional semiclassical model as a powerful technique for the study of correlated multi-electron escape in atoms driven by infrared laser pulses at intensities where electron-electron correlation prevails. We do so in the context of triple ionization of strongly driven Ne. We show that a drawback of other current quantum mechanical and classical models of triple ionization is that they soften the Coulomb potential of each electron with the core. The model we employ fully accounts for the singularity in the Coulomb potentials of a recolliding electron with the core and a bound electron with the core as well as for the interaction of a recolliding with a bound electron. Our model treats approximately only the interaction between bound electrons through the use of effective potentials. These effective potentials ensure that no artificial autoionization takes place as a result of the full treatment of the electron-core potential. We demonstrate the accuracy of our model by obtaining triple ionization distributions of the sum of the final electron momenta which we find to be in very good agreement with experiments. Also, we explain the main features of these momenta distributions in terms of the prevalent pathways of correlated three-electron escape in Ne. We also show that the different ionization pathways prevailing in three-electron escape in strongly driven Ne versus Ar give rise to different momenta distributions in these two atoms.
△ Less
Submitted 7 February, 2023;
originally announced February 2023.
-
Nondipole electron momentum offset as a probe of correlated three electron ionization in strongly driven atoms
Authors:
Georgios Petros Katsoulis,
Matthew Benjamin Peters,
Agapi Emmanouilidou
Abstract:
We employ a recently developed three-dimensional semiclassical model to identify nondipole effects in triple ionization of Ne driven by infrared laser pulses at intensities where electron-electron correlation prevails. This model fully accounts for the Coulomb interaction of each electron with the core and avoids artificial autoionization by employing effective Coulomb potentials to describe the i…
▽ More
We employ a recently developed three-dimensional semiclassical model to identify nondipole effects in triple ionization of Ne driven by infrared laser pulses at intensities where electron-electron correlation prevails. This model fully accounts for the Coulomb interaction of each electron with the core and avoids artificial autoionization by employing effective Coulomb potentials to describe the interaction between bound electrons (ECBB). Using the ECBB model, we identify a prominent signature of nondipole effects. Namely, the component along the direction of light propagation of the average sum of the final electron momenta is large and positive. That is, we identify a positive momentum offset, absent in the dipole approximation. We find that this positive momentum offset stems mostly from the momentum change due to the magnetic field. To further understand this momentum change, we also develop a simple model for the motion of an electron inside an electromagnetic field. This simple model accounts for the effect of the Coulomb forces only as a sharp change in the momentum of the electron during recollision. We show that the momentum change due to the magnetic field is related with the sharp change in momentum during recollision for the recolliding electron as well as with the time of recollision for both the recolliding and bound electrons. Hence, we demonstrate that the final electron momentum offset probes the strength of a recollision and hence the degree of correlation in multielectron ionization.
△ Less
Submitted 25 February, 2023; v1 submitted 31 October, 2022;
originally announced October 2022.
-
A general model and toolkit for the ionization of three or more electrons in strongly driven atoms using an effective Coulomb potential for the interaction between bound electrons
Authors:
M. B. Peters,
G. P. Katsoulis,
A. Emmanouilidou
Abstract:
We formulate a three-dimensional semi-classical model to address triple and double ionization in three-electron atoms driven by intense infrared laser pulses. During time propagation, our model fully accounts for the Coulomb singularities, the magnetic field of the laser pulse and for the motion of the nucleus at the same time as for the motion of the three electrons. The framework we develop is g…
▽ More
We formulate a three-dimensional semi-classical model to address triple and double ionization in three-electron atoms driven by intense infrared laser pulses. During time propagation, our model fully accounts for the Coulomb singularities, the magnetic field of the laser pulse and for the motion of the nucleus at the same time as for the motion of the three electrons. The framework we develop is general and can account for multi-electron ionization in strongly-driven atoms with more than three electrons. To avoid unphysical autoionization arising in classical models of three or more electrons, we replace the Coulomb potential between pairs of bound electrons with effective Coulomb potentials. The Coulomb forces between electrons that are not both bound are fully accounted for. We develop a set of criteria to determine when electrons become bound during time propagation. We compare ionization spectra obtained with the model developed here and with the Heisenberg model that includes a potential term restricting an electron from closely approaching the core. Such spectra include the sum of the electron momenta along the direction of the laser field as well as the correlated electron momenta. We also compare these results with experimental ones.
△ Less
Submitted 28 January, 2022;
originally announced January 2022.
-
Signatures of magnetic field effects in non-sequential double ionization manifesting as back-scattering for molecules versus forward-scattering for atoms
Authors:
Georgios Petros Katsoulis,
Matthew Benjamin Peters,
André Staudte,
Ravi Bhardwaj,
Agapi Emmanouilidou
Abstract:
For two-electron diatomic molecules, we investigate magnetic field effects in non-sequential double ionization where recollisions prevail. We do so by formulating a three-dimensional semi-classical model that fully accounts for the Coulomb singularities and for magnetic field effects during time propagation. Using this model, we identify a prominent signature of non-dipole effects. Namely, we demo…
▽ More
For two-electron diatomic molecules, we investigate magnetic field effects in non-sequential double ionization where recollisions prevail. We do so by formulating a three-dimensional semi-classical model that fully accounts for the Coulomb singularities and for magnetic field effects during time propagation. Using this model, we identify a prominent signature of non-dipole effects. Namely, we demonstrate that the recolliding electron back-scatters along the direction of light propagation. Hence, this electron escapes opposite to the direction of change in momentum due to the magnetic field. This is in striking contrast to strongly-driven atoms where the recolliding electron forward-scatters along the direction of light propagation. We attribute these distinct signatures to the different gate that the magnetic field creates jointly with a soft recollision in molecules compared to a hard recollision in atoms. These two different gates give rise, shortly before recollision, to different momenta and positions of the recolliding electron along the direction of light propagation. As a result, we show that the Coulomb forces from the nuclei act to back-scatter the recolliding electron in molecules and forward-scatter it in atoms along the direction of light propagation.
△ Less
Submitted 11 December, 2020;
originally announced December 2020.
-
Triple ionization and "frustrated" triple ionization in triatomic molecules driven by intense laser fields
Authors:
M. B. Peters,
V. P. Majety,
A. Emmanouilidou
Abstract:
We formulate a three-dimensional semi-classical model to treat three-electron escape dynamics in a strongly-driven linear triatomic molecule, HeH$_{2}^{+}$. Our model includes the Coulomb singularities. Hence, to avoid unphysical autoionization, we employ two criteria to switch off the Coulomb repulsive force between two bound electrons and switch it on when the motion of one electron is mostly de…
▽ More
We formulate a three-dimensional semi-classical model to treat three-electron escape dynamics in a strongly-driven linear triatomic molecule, HeH$_{2}^{+}$. Our model includes the Coulomb singularities. Hence, to avoid unphysical autoionization, we employ two criteria to switch off the Coulomb repulsive force between two bound electrons and switch it on when the motion of one electron is mostly determined by the laser field. We investigate triple and "frustrated" triple ionization. In the latter process two electrons escape while one electron remains bound in a Rydberg state. We find that two pathways prevail in "frustrated" triple ionization, as in "frustrated" double ionization. We also find that the electron that remains in a Rydberg state is more likely to be attached to He$^{2+}$ compared to H$^{+}$. Our results indicate that in triple and "frustrated" triple ionization electronic correlation is weak. Moreover, we compute the sum of the kinetic energies as well as the angular patterns of the final ion fragments in triple and "frustrated" triple ionization. These patterns suggest that the fragmenting molecule deviates from its initial linear configuration.
△ Less
Submitted 30 October, 2020;
originally announced October 2020.
-
Solvent reaction coordinate for an S$_N$2 reaction
Authors:
Christian Leitold,
Christopher J. Mundy,
Marcel D. Baer,
Gregory K. Schenter,
Baron Peters
Abstract:
We study the prototypical SN2 reaction Cl$^-$ + CH$_3$Cl $\to$ CH$_3$Cl + Cl$^-$ in water using quantum mechanics / molecular mechanics (QM/MM) computer simulations with transition path sampling and inertial likelihood maximization. We have identified a new solvent coordinate to complement the original atom-exchange coordinate used in the classic analysis by Chandrasekhar, Smith, and Jorgensen [Re…
▽ More
We study the prototypical SN2 reaction Cl$^-$ + CH$_3$Cl $\to$ CH$_3$Cl + Cl$^-$ in water using quantum mechanics / molecular mechanics (QM/MM) computer simulations with transition path sampling and inertial likelihood maximization. We have identified a new solvent coordinate to complement the original atom-exchange coordinate used in the classic analysis by Chandrasekhar, Smith, and Jorgensen [Ref1]. The new solvent coordinate quantifies instantaneous solvent induced polarization relative to the equilibrium average charge density at each point along the reaction pathway. On the basis of likelihood scores and committor distributions, the new solvent coordinate improves upon the description of solvent dynamical effects relative to previously proposed solvent coordinates. However, it does not increase the transmission coefficient or the accuracy of a transition state theory rate calculation.
△ Less
Submitted 8 July, 2020;
originally announced July 2020.
-
Solid-solid phase equilibria in the NaCl-KCl system
Authors:
Jamshed Anwar,
Christian Leitold,
Baron Peters
Abstract:
Solid solutions, structurally ordered but compositionally disordered mixtures, can form for salts, metals, and even organic compounds. The NaCl-KCl system forms a solid solution at all compositions between 657°C and 505°C. Below a critical temperature of 505°C, the system exhibits a miscibility gap with coexisting Na-rich and K-rich rocksalt phases. We calculate the phase diagram in this region us…
▽ More
Solid solutions, structurally ordered but compositionally disordered mixtures, can form for salts, metals, and even organic compounds. The NaCl-KCl system forms a solid solution at all compositions between 657°C and 505°C. Below a critical temperature of 505°C, the system exhibits a miscibility gap with coexisting Na-rich and K-rich rocksalt phases. We calculate the phase diagram in this region using the semi-grand canonical Widom method, which averages over virtual particle transmutations. We verify our results by comparison with free energies calculated from thermodynamic integration and extrapolate the location of the critical point. The calculations reproduce the experimental phase diagram remarkably well and illustrate how solid-solid equilibria and chemical potentials, including those at metastable conditions, can be computed for materials that form solid solutions.
△ Less
Submitted 15 April, 2020; v1 submitted 21 March, 2020;
originally announced March 2020.
-
Fully reversible neural networks for large-scale 3D seismic horizon tracking
Authors:
Bas Peters,
Eldad Haber
Abstract:
Tracking a horizon in seismic images or 3D volumes is an integral part of seismic interpretation. The last few decades saw progress in using neural networks for this task, starting from shallow networks for 1D traces, to deeper convolutional neural networks for large 2D images. Because geological structures are intrinsically 3D, we hope to see improved horizon tracking by training networks on 3D s…
▽ More
Tracking a horizon in seismic images or 3D volumes is an integral part of seismic interpretation. The last few decades saw progress in using neural networks for this task, starting from shallow networks for 1D traces, to deeper convolutional neural networks for large 2D images. Because geological structures are intrinsically 3D, we hope to see improved horizon tracking by training networks on 3D seismic data cubes. While there are some 3D convolutional neural networks for various seismic interpretation tasks, they are restricted to shallow networks or relatively small 3D inputs because of memory limitations. The required memory for the network states and weights increases with network depth. We present a fully reversible network for horizon tracking that has a memory requirement that is independent of network depth. To tackle memory issues regarding the network weights, we use layers that train in a factorized form directly. Therefore, we can maintain a large number of network channels while kee** the number of convolutional kernels low. We use the saved memory to increase the input size of the data by order of magnitude such that the network can better learn from large structures in the data. A field data example verifies the proposed network structure is suitable for seismic horizon tracking.
△ Less
Submitted 18 March, 2020;
originally announced March 2020.
-
Deep connections between learning from limited labels & physical parameter estimation -- inspiration for regularization
Authors:
Bas Peters
Abstract:
Recently established equivalences between differential equations and the structure of neural networks enabled some interpretation of training of a neural network as partial-differential-equation (PDE) constrained optimization. We add to the previously established connections, explicit regularization that is particularly beneficial in the case of single large-scale examples with partial annotation.…
▽ More
Recently established equivalences between differential equations and the structure of neural networks enabled some interpretation of training of a neural network as partial-differential-equation (PDE) constrained optimization. We add to the previously established connections, explicit regularization that is particularly beneficial in the case of single large-scale examples with partial annotation. We show that explicit regularization of model parameters in PDE constrained optimization translates to regularization of the network output. Examination of the structure of the corresponding Lagrangian and backpropagation algorithm do not reveal additional computational challenges. A hyperspectral imaging example shows that minimum prior information together with cross-validation for optimal regularization parameters boosts the segmentation accuracy.
△ Less
Submitted 17 March, 2020;
originally announced March 2020.
-
Fully reversible neural networks for large-scale surface and sub-surface characterization via remote sensing
Authors:
Bas Peters,
Eldad Haber,
Keegan Lensink
Abstract:
The large spatial/frequency scale of hyperspectral and airborne magnetic and gravitational data causes memory issues when using convolutional neural networks for (sub-) surface characterization. Recently developed fully reversible networks can mostly avoid memory limitations by virtue of having a low and fixed memory requirement for storing network states, as opposed to the typical linear memory g…
▽ More
The large spatial/frequency scale of hyperspectral and airborne magnetic and gravitational data causes memory issues when using convolutional neural networks for (sub-) surface characterization. Recently developed fully reversible networks can mostly avoid memory limitations by virtue of having a low and fixed memory requirement for storing network states, as opposed to the typical linear memory growth with depth. Fully reversible networks enable the training of deep neural networks that take in entire data volumes, and create semantic segmentations in one go. This approach avoids the need to work in small patches or map a data patch to the class of just the central pixel. The cross-entropy loss function requires small modifications to work in conjunction with a fully reversible network and learn from sparsely sampled labels without ever seeing fully labeled ground truth. We show examples from land-use change detection from hyperspectral time-lapse data, and regional aquifer map** from airborne geophysical and geological data.
△ Less
Submitted 16 March, 2020;
originally announced March 2020.
-
Does shallow geological knowledge help neural-networks to predict deep units?
Authors:
Bas Peters,
Eldad Haber,
Justin Granek
Abstract:
Geological interpretation of seismic images is a visual task that can be automated by training neural networks. While neural networks have shown to be effective at various interpretation tasks, a fundamental challenge is the lack of labeled data points in the subsurface. For example, the interpolation and extrapolation of well-based lithology using seismic images relies on a small number of known…
▽ More
Geological interpretation of seismic images is a visual task that can be automated by training neural networks. While neural networks have shown to be effective at various interpretation tasks, a fundamental challenge is the lack of labeled data points in the subsurface. For example, the interpolation and extrapolation of well-based lithology using seismic images relies on a small number of known labels. Besides well-known data augmentation techniques, as well as regularization of the network output, we propose and test another approach to deal with the lack of labels. Non learning-based horizon trackers work very well in the shallow subsurface where seismic images are of higher quality and the geological units are roughly layered. We test if these segmented and shallow units can help train neural networks to predict deeper geological units that are not layered and flat. We show that knowledge of shallow geological units helps to predict deeper units when there are only a few labels for training using a dataset from the Sea of Ireland. We employ U-net based multi-resolution networks, and we show that these networks can be described using matrix-vector product notation in a similar fashion as standard geophysical inverse problems.
△ Less
Submitted 8 April, 2019;
originally announced April 2019.
-
Neural-networks for geophysicists and their application to seismic data interpretation
Authors:
Bas Peters,
Eldad Haber,
Justin Granek
Abstract:
Neural-networks have seen a surge of interest for the interpretation of seismic images during the last few years. Network-based learning methods can provide fast and accurate automatic interpretation, provided there are sufficiently many training labels. We provide an introduction to the field aimed at geophysicists that are familiar with the framework of forward modeling and inversion. We explain…
▽ More
Neural-networks have seen a surge of interest for the interpretation of seismic images during the last few years. Network-based learning methods can provide fast and accurate automatic interpretation, provided there are sufficiently many training labels. We provide an introduction to the field aimed at geophysicists that are familiar with the framework of forward modeling and inversion. We explain the similarities and differences between deep networks to other geophysical inverse problems and show their utility in solving problems such as lithology interpolation between wells, horizon tracking and segmentation of seismic images. The benefits of our approach are demonstrated on field data from the Sea of Ireland and the North Sea.
△ Less
Submitted 26 March, 2019;
originally announced March 2019.
-
Multi-resolution neural networks for tracking seismic horizons from few training images
Authors:
Bas Peters,
Justin Granek,
Eldad Haber
Abstract:
Detecting a specific horizon in seismic images is a valuable tool for geological interpretation. Because hand-picking the locations of the horizon is a time-consuming process, automated computational methods were developed starting three decades ago. Older techniques for such picking include interpolation of control points however, in recent years neural networks have been used for this task. Unti…
▽ More
Detecting a specific horizon in seismic images is a valuable tool for geological interpretation. Because hand-picking the locations of the horizon is a time-consuming process, automated computational methods were developed starting three decades ago. Older techniques for such picking include interpolation of control points however, in recent years neural networks have been used for this task. Until now, most networks trained on small patches from larger images. This limits the networks ability to learn from large-scale geologic structures. Moreover, currently available networks and training strategies require label patches that have full and continuous annotations, which are also time-consuming to generate.
We propose a projected loss-function for training convolutional networks with a multi-resolution structure, including variants of the U-net. Our networks learn from a small number of large seismic images without creating patches. The projected loss-function enables training on labels with just a few annotated pixels and has no issue with the other unknown label pixels. Training uses all data without reserving some for validation. Only the labels are split into training/testing. Contrary to other work on horizon tracking, we train the network to perform non-linear regression, and not classification. As such, we propose labels as the convolution of a Gaussian kernel and the known horizon locations that indicate uncertainty in the labels. The network output is the probability of the horizon location. We demonstrate the proposed computational ingredients on two different datasets, for horizon extrapolation and interpolation. We show that the predictions of our methodology are accurate even in areas far from known horizon locations because our learning strategy exploits all data in large seismic images.
△ Less
Submitted 26 December, 2018;
originally announced December 2018.
-
The XDEM Multi-physics and Multi-scale Simulation Technology: Review on DEM-CFD Coupling, Methodology and Engineering Applications
Authors:
Bernhard Peters,
Maryam Baniasadi,
Mehdi Baniasadi,
Xavier Besseron,
Alvaro Estupinan Donoso,
Mohammad Mohseni,
Gabriele Pozzetti
Abstract:
The XDEM multi-physics and multi-scale simulation platform roots in the Ex- tended Discrete Element Method (XDEM) and is being developed at the In- stitute of Computational Engineering at the University of Luxembourg. The platform is an advanced multi- physics simulation technology that combines flexibility and versatility to establish the next generation of multi-physics and multi-scale simulatio…
▽ More
The XDEM multi-physics and multi-scale simulation platform roots in the Ex- tended Discrete Element Method (XDEM) and is being developed at the In- stitute of Computational Engineering at the University of Luxembourg. The platform is an advanced multi- physics simulation technology that combines flexibility and versatility to establish the next generation of multi-physics and multi-scale simulation tools. For this purpose the simulation framework relies on coupling various predictive tools based on both an Eulerian and Lagrangian approach. Eulerian approaches represent the wide field of continuum models while the Lagrange approach is perfectly suited to characterise discrete phases. Thus, continuum models include classical simulation tools such as Computa- tional Fluid Dynamics (CFD) or Finite Element Analysis (FEA) while an ex- tended configuration of the classical Discrete Element Method (DEM) addresses the discrete e.g. particulate phase. Apart from predicting the trajectories of individual particles, XDEM extends the application to estimating the thermo- dynamic state of each particle by advanced and optimised algorithms. The thermodynamic state may include temperature and species distributions due to chemical reaction and external heat sources. Hence, coupling these extended features with either CFD or FEA opens up a wide range of applications as diverse as pharmaceutical industry e.g. drug production, agriculture food and processing industry, mining, construction and agricultural machinery, metals manufacturing, energy production and systems biology.
△ Less
Submitted 24 August, 2018;
originally announced August 2018.
-
Chain Length Dispersity Effects on Mobility of Entangled Polymers
Authors:
Brandon Peters,
K. Michael Salerno,
Ting Ge,
Dvora Perahia,
Gary Grest
Abstract:
While nearly all theoretical and computational studies of entangled polymer melts have focused on uniform samples, polymer synthesis routes always result in some dispersity, albeit narrow, of distribution of molecular weights (D_M=M_w/M_n ~ 1.02-1.04). Here the effects of dispersity on chain mobility are studied for entangled, disperse melts using a coarse-grained model for polyethylene. Polymer m…
▽ More
While nearly all theoretical and computational studies of entangled polymer melts have focused on uniform samples, polymer synthesis routes always result in some dispersity, albeit narrow, of distribution of molecular weights (D_M=M_w/M_n ~ 1.02-1.04). Here the effects of dispersity on chain mobility are studied for entangled, disperse melts using a coarse-grained model for polyethylene. Polymer melts with chain lengths set to follow a Schulz-Zimm distribution for the same average M_w = 36 kg/mol with D_M = 1.0 to 1.16, were studied for times of $600-800$ $μ$s using molecular dynamics simulations. This time frame is longer than the time required to reach the diffusive regime. We find that dispersity in this range does not affect the entanglement time or tube diameter. However, while there is negligible difference in the average mobility of chains for the uniform distribution D_M=1.0 and D_M = 1.02, the shortest chains move significantly faster than the longest ones offering a constraint release pathway for the melts for larger D_M.
△ Less
Submitted 11 July, 2018;
originally announced July 2018.
-
A co-located partitions strategy for parallel CFD-DEM couplings
Authors:
Gabriele Pozzetti,
Xavier Besseron,
Alban Rousset,
Bernhard Peters
Abstract:
In this work, a new partition-collocation strategy for the parallel execution of CFD--DEM couplings is investigated. Having a good parallel performance is a key issue for an Eulerian-Lagrangian software that aims to be applied to solve industrially significant problems, as the computational cost of these couplings is one of their main drawback. The approach presented here consists in co-locating t…
▽ More
In this work, a new partition-collocation strategy for the parallel execution of CFD--DEM couplings is investigated. Having a good parallel performance is a key issue for an Eulerian-Lagrangian software that aims to be applied to solve industrially significant problems, as the computational cost of these couplings is one of their main drawback. The approach presented here consists in co-locating the overlap** parts of the simulation domain of each software on the same MPI process, in order to reduce the cost of the data exchanges. It is shown how this strategy allows reducing memory consumption and inter-process communication between CFD and DEM to a minimum and therefore to overcome an important parallelization bottleneck identified in the literature. Three benchmarks are proposed to assess the consistency and scalability of this approach. A coupled execution on 280 cores shows that less than 0.1% of the time is used to perform inter-physics data exchange.
△ Less
Submitted 14 February, 2018;
originally announced February 2018.
-
Analysis of electrolyte transport through charged nanopores
Authors:
P. B. Peters,
R. van Roij,
M. Z. Bazant,
P. M. Biesheuvel
Abstract:
We revisit the classical problem of flow of electrolyte solutions through charged capillary nanopores or nanotubes as described by the capillary pore model (also called "space charge" theory). This theory assumes very long and thin pores and uses a one-dimensional flux-force formalism which relates fluxes (electrical current, salt flux, fluid velocity) and driving forces (difference in electric po…
▽ More
We revisit the classical problem of flow of electrolyte solutions through charged capillary nanopores or nanotubes as described by the capillary pore model (also called "space charge" theory). This theory assumes very long and thin pores and uses a one-dimensional flux-force formalism which relates fluxes (electrical current, salt flux, fluid velocity) and driving forces (difference in electric potential, salt concentration, pressure). We analyze the general case with overlap** electric double layers in the pore and a nonzero axial salt concentration gradient. The 3$\times$3 matrix relating these quantities exhibits Onsager symmetry and we report a significant new simplification for the diagonal element relating axial salt flux to the gradient in chemical potential. We prove that Onsager symmetry is preserved under changes of variables, which we illustrate by transformation to a different flux-force matrix given by Gross and Osterle (1968). The capillary pore model is well-suited to describe the nonlinear response of charged membranes or nanofluidic devices for electrokinetic energy conversion and water desalination, as long as the transverse ion profiles remain in local quasi-equilibrium. As an example, we evaluate electrical power production from a salt concentration difference by reverse electrodialysis, using an efficiency vs. power diagram. We show that since the capillary pore model allows for axial gradients in salt concentration, partial loops in current, salt flux or fluid flow can develop in the pore. Predictions for macroscopic transport properties using a reduced model where the potential and concentration are assumed to be invariant with radial coordinate ("uniform potential" or "fine capillary pore" model), are close to results of the full model.
△ Less
Submitted 15 August, 2019; v1 submitted 14 December, 2015;
originally announced December 2015.