-
Materials research for hiper laser fusion facilities: chamber wall, structural material and final optics
Authors:
J. Alvarez,
A. Rivera,
R. Gonzalez-Arrabal,
D. Garoz,
E. Del Rio,
J. M. Perlado
Abstract:
The European HiPER project aims to demonstrate commercial viability of inertial fusion energy within the following two decades. This goal requires an extensive Research & Development program on materials for different applications (e.g., first wall, structural components and final optics). In this paper we will discuss our activities in the framework of HiPER to develop materials studies for the d…
▽ More
The European HiPER project aims to demonstrate commercial viability of inertial fusion energy within the following two decades. This goal requires an extensive Research & Development program on materials for different applications (e.g., first wall, structural components and final optics). In this paper we will discuss our activities in the framework of HiPER to develop materials studies for the different areas of interest. The chamber first wall will have to withstand explosions of at least 100 MJ at a repetition rate of 5-10 Hz. If direct drive targets are used, a dry wall chamber operated in vacuum is preferable. In this situation the major threat for the wall stems from ions. For reasonably low chamber radius (5-10 m) new materials based on W and C are being investigated, e.g., engineered surfaces and nanostructured materials. Structural materials will be subject to high fluxes of neutrons leading to deleterious effects, such as, swelling. Low activation advanced steels as well as new nanostructured materials are being investigated. The final optics lenses will not survive the extreme ion irradiation pulses originated in the explosions. Therefore, mitigation strategies are being investigated. In addition, efforts are being carried out in understanding optimized conditions to minimize the loss of optical properties by neutron and gamma irradiation.
△ Less
Submitted 11 February, 2024;
originally announced May 2024.
-
Thermo-mechanical behaviour of a tungsten first wall in HiPER laser fusion scenarios
Authors:
D Garoz,
A. R. Páramo,
A Rivera,
J. M. Perlado,
R González-Arrabal
Abstract:
The behaviour of a tungsten first wall is studied under the irradiation conditions predicted for the different operation scenarios of the European Laser fusion project HiPER, which is based on direct drive targets and an evacuated dry wall chamber. The scenarios correspond to different stages in the development of a nuclear fusion reactor, from proof of principle (bunch mode facility) to economic…
▽ More
The behaviour of a tungsten first wall is studied under the irradiation conditions predicted for the different operation scenarios of the European Laser fusion project HiPER, which is based on direct drive targets and an evacuated dry wall chamber. The scenarios correspond to different stages in the development of a nuclear fusion reactor, from proof of principle (bunch mode facility) to economic feasibility (pre-commercial power plant). This work constitutes a quantitative study to evaluate the first wall performance under realistic irradiation conditions in the different scenarios. We calculated the radiation fluxes assuming the geometrical configurations reported so far for HiPER. Then, we calculated the irradiation-induced first wall temperature evolution and the thermo-mechanical response of the material. The results indicate that the first wall will plastically deform up to a few microns underneath the surface. Continuous operation in power plant leads to fatigue failure with crack generation and growth. Finally, the crack propagation and the minimum W thickness required to fulfil the first wall protection role is studied. The response of tungsten as first wall material as well as its main limitations will be discussed for the HiPER scenarios.
△ Less
Submitted 11 February, 2024;
originally announced May 2024.
-
Silica final lens performance in laser fusion facilities: HiPER and LIFE
Authors:
David Garoz,
R. González-Arrabal,
R. Juárez,
J. Álvarez,
J. Sanz,
J. M. Perlado,
A. Rivera
Abstract:
Nowadays, the projects LIFE (Laser Inertial Fusion Energy) in USA and HiPER (High Power Laser Energy Research) in Europe are the most advanced ones to demonstrate laser fusion energy viability. One of the main points of concern to properly achieve ignition is the performance of the final optics (lenses) under the severe irradiation conditions that take place in fusion facilities. In this paper, we…
▽ More
Nowadays, the projects LIFE (Laser Inertial Fusion Energy) in USA and HiPER (High Power Laser Energy Research) in Europe are the most advanced ones to demonstrate laser fusion energy viability. One of the main points of concern to properly achieve ignition is the performance of the final optics (lenses) under the severe irradiation conditions that take place in fusion facilities. In this paper, we calculate the radiation fluxes and doses as well as the radiation-induced temperature enhancement and colour centre formation in final lenses assuming realistic geometrical configurations for HiPER and LIFE. On these bases, the mechanical stresses generated by the established temperature gradients are evaluated showing that from a mechanical point of view lenses only fulfill specifications if ions resulting from the imploding target are mitigated. The absorption coefficient of the lenses is calculated during reactor startup and steady-state operation. The obtained results evidence the necessity of new solutions to tackle ignition problems during the startup process for HiPER. Finally, we evaluated the effect of temperature gradients on focal length changes and lens surface deformations. In summary, we discuss the capabilities and weak points of silica lenses and propose alternatives to overcome predictable problems.
△ Less
Submitted 11 February, 2024;
originally announced February 2024.