-
Optical reflection signature of an axion dielectric with magnetic current
Authors:
Pedro D. S. Silva,
Ronald A. Pereira,
Manoel M. Ferreira Jr
Abstract:
In this work, we investigate the reflection properties on the interface between an ordinary dielectric medium and a dielectric supporting a magnetic current (equivalent to a dielectric governed by axion electrodynamics). Considering the usual Maxwell equations and constitutive relations, we derive the general Fresnel coefficients for reflection for an incident wave with $s$ and $p$ polarization, a…
▽ More
In this work, we investigate the reflection properties on the interface between an ordinary dielectric medium and a dielectric supporting a magnetic current (equivalent to a dielectric governed by axion electrodynamics). Considering the usual Maxwell equations and constitutive relations, we derive the general Fresnel coefficients for reflection for an incident wave with $s$ and $p$ polarization, assuming an isotropic magnetic current on a dielectric substrate. We determine all total internal reflection and critical angles (Brewster angles) conditions, which are given by strict relations between all relevant electromagnetic quantities of the system and the frequency. For $s$- and $p$-polarized incident waves, total internal reflection can occur under certain conditions on the constitutive parameters (for each propagating mode) at specific frequency windows and certain incidence angle intervals. All possible conditions to define critical angles for null reflection are determined. This scenario allows polarization changes by reflection. Considering a $p$-polarized incident wave, the frequency and the Brewster angle, allowing null reflection for both propagating modes, are determined. The Goos-Hänchen shift and the complex Kerr rotation are also evaluated. The Kerr ellipticity angle presents a frequency-dependent behavior, also reported in Weyl semimetals, having maximum values $η_{Kerr}=\pm π/4$ for specific values of frequency, which may work as a signature of this axion chiral dielectric.
△ Less
Submitted 9 July, 2024; v1 submitted 8 July, 2024;
originally announced July 2024.
-
Las actividades de laboratorio en Física: un cambio en la estructura a favor del conocimiento científico
Authors:
Andrea Pereira,
Álvaro Suárez
Abstract:
In this article we argue how the use of structured laboratory guides are pedagogically inadequate for meaningful learning. Subsequently, an approach to laboratory activities in accordance with scientific work and the constructivist vision of learning is described, exemplifying how this approach can be applied to restructure a usual laboratory practice.
In this article we argue how the use of structured laboratory guides are pedagogically inadequate for meaningful learning. Subsequently, an approach to laboratory activities in accordance with scientific work and the constructivist vision of learning is described, exemplifying how this approach can be applied to restructure a usual laboratory practice.
△ Less
Submitted 14 June, 2024;
originally announced June 2024.
-
Channeling Skyrmions: suppressing the skyrmion Hall effect in ferrimagnetic nanostripes
Authors:
R. C. Silva,
R. L. Silva,
J. C. Moreira,
W. A. Moura-Melo,
A. R. Pereira
Abstract:
The Skyrmion Hall Effect (SkHE) observed in ferromagnetic (FM) and ferrimagnetic (FI) skyrmions traveling due to a spin-polarized current can be a problematic issue when it comes to technological applications. By investigating the properties of FI skyrmions in racetracks through computational simulations, we have described the nature of their movement based on the relative values of the exchange,…
▽ More
The Skyrmion Hall Effect (SkHE) observed in ferromagnetic (FM) and ferrimagnetic (FI) skyrmions traveling due to a spin-polarized current can be a problematic issue when it comes to technological applications. By investigating the properties of FI skyrmions in racetracks through computational simulations, we have described the nature of their movement based on the relative values of the exchange, Dzyaloshinskii-Moriya, and anisotropy coupling constants. Beyond that, using a design strategy, a magnetic channel-like nano-device is proposed in which a spin-polarized current protocol is created to successfully control the channel on which the skyrmion will travel without the adverse SkHE. Additionally, a simple adjustment in the current strength can modify the skyrmion position sideways between different parallel channels in the nanostripe.
△ Less
Submitted 14 May, 2024;
originally announced May 2024.
-
Correlation between objective and subjective assessment of noise barriers
Authors:
J. Redondo,
M. P. Peiró-Torres,
C. Llinares,
J. M. Bravo,
A. Pereira,
P. Amado-Mendes
Abstract:
There are several international standards that define the way to evaluate the attenuation capacity of noise reducing devices, by single-number quantities representing airborne sound insulation and insertion loss. These two single-value ratings define the quality and performance of acoustic barriers, the former being related to intrinsic and the latter to both intrinsic and extrinsic acoustic chara…
▽ More
There are several international standards that define the way to evaluate the attenuation capacity of noise reducing devices, by single-number quantities representing airborne sound insulation and insertion loss. These two single-value ratings define the quality and performance of acoustic barriers, the former being related to intrinsic and the latter to both intrinsic and extrinsic acoustic characteristics of the devices. However, not many studies can be found on whether these objective parameters correlate to the perception of annoyance reduction. The aim of the present work is to analyze the adequacy of these objective ratings to indicate the performance of noise barriers, by comparing their values with the perception of annoyance reduction. For this purpose, ninety individuals of two different nationalities (Spanish and Portuguese) were asked to rate the perceived annoyance reduction in a listening experimental test, in which they were exposed, under controlled conditions, to several environmental noises and acoustic screened stimuli simulated by audio filters. The obtained results show a high correlation between objective ratings and subjective annoyance perception, with a better correlation being observed for insertion loss single-number parameter than for the airborne sound insulation single-number rating. Furthermore, significant differences were found depending on the gender and nationality of the respondents. The results, from this ongoing research work, may be of great interest for future acoustic barriers design.
△ Less
Submitted 6 February, 2024;
originally announced February 2024.
-
Ground observations of a space laser for the assessment of its in-orbit performance
Authors:
The Pierre Auger Collaboration,
O. Lux,
I. Krisch,
O. Reitebuch,
D. Huber,
D. Wernham,
T. Parrinello,
:,
A. Abdul Halim,
P. Abreu,
M. Aglietta,
I. Allekotte,
K. Almeida Cheminant,
A. Almela,
R. Aloisio,
J. Alvarez-Muñiz,
J. Ammerman Yebra,
G. A. Anastasi,
L. Anchordoqui,
B. Andrada,
S. Andringa,
Anukriti,
L. Apollonio,
C. Aramo,
P. R. Araújo Ferreira
, et al. (358 additional authors not shown)
Abstract:
The wind mission Aeolus of the European Space Agency was a groundbreaking achievement for Earth observation. Between 2018 and 2023, the space-borne lidar instrument ALADIN onboard the Aeolus satellite measured atmospheric wind profiles with global coverage which contributed to improving the accuracy of numerical weather prediction. The precision of the wind observations, however, declined over the…
▽ More
The wind mission Aeolus of the European Space Agency was a groundbreaking achievement for Earth observation. Between 2018 and 2023, the space-borne lidar instrument ALADIN onboard the Aeolus satellite measured atmospheric wind profiles with global coverage which contributed to improving the accuracy of numerical weather prediction. The precision of the wind observations, however, declined over the course of the mission due to a progressive loss of the atmospheric backscatter signal. The analysis of the root cause was supported by the Pierre Auger Observatory in Argentina whose fluorescence detector registered the ultraviolet laser pulses emitted from the instrument in space, thereby offering an estimation of the laser energy at the exit of the instrument for several days in 2019, 2020 and 2021. The reconstruction of the laser beam not only allowed for an independent assessment of the Aeolus performance, but also helped to improve the accuracy in the determination of the laser beam's ground track on single pulse level. The results presented in this paper set a precedent for the monitoring of space lasers by ground-based telescopes and open new possibilities for the calibration of cosmic-ray observatories.
△ Less
Submitted 12 October, 2023;
originally announced October 2023.
-
Experimental verification of magnetic near-field channeling using a helical-shaped wire medium lens
Authors:
Tiago A. Morgado,
Guilherme L. João,
Ricardo A. M. Pereira,
David E. Fernandes,
Sylvain Lannebère
Abstract:
We experimentally verify that a magnetic uniaxial wire medium lens consisting of a racemic array of helical-shaped metallic wires may enable channeling the normal component of the magnetic field of near-field sources with resolution well below the diffraction limit over a broad bandwidth. It is experimentally demonstrated that the helical-shaped wire medium lens can be regarded as the magnetic cou…
▽ More
We experimentally verify that a magnetic uniaxial wire medium lens consisting of a racemic array of helical-shaped metallic wires may enable channeling the normal component of the magnetic field of near-field sources with resolution well below the diffraction limit over a broad bandwidth. It is experimentally demonstrated that the helical-shaped wire medium lens can be regarded as the magnetic counterpart of the usual wire medium lenses formed by straight metallic wires. The experimental results are validated with full-wave numerical simulations. We envision that the proposed metamaterial lens may have potential applications in magnetic resonance imaging, near-field wireless power transfer, and sensing.
△ Less
Submitted 16 June, 2023; v1 submitted 15 June, 2023;
originally announced June 2023.
-
Refraction beats attenuation in breast CT
Authors:
Michał Rawlik,
Alexandre Pereira,
Simon Spindler,
Zhentian Wang,
Lucia Romano,
Konstantins Jefimovs,
Zhitian Shi,
Maxim Polikarpov,
**qiu Xu,
Marie-Christine Zdora,
Stefano van Gogh,
Martin Stauber,
Eduardo Yukihara,
Jeppe Brage Christensen,
Rahel Kubik-Huch,
Tilo Niemann,
Cornelia Leo,
Zsuzsanna Varga,
Andreas Boss,
Marco Stampanoni
Abstract:
For a century, clinical X-ray imaging has visualised only the attenuation properties of tissue, which fundamentally limits the contrast, particularly in soft tissues like the breast. Imaging based on refraction can overcome this limitation, but so far has been constrained to high-dose ex-vivo applications or required highly coherent X-ray sources, like synchrotrons. It has been predicted that grat…
▽ More
For a century, clinical X-ray imaging has visualised only the attenuation properties of tissue, which fundamentally limits the contrast, particularly in soft tissues like the breast. Imaging based on refraction can overcome this limitation, but so far has been constrained to high-dose ex-vivo applications or required highly coherent X-ray sources, like synchrotrons. It has been predicted that grating interferometry (GI) could eventually allow computed tomography (CT) to be more dose-efficient. However, the benefit of refraction in clinical CT has not been demonstrated so far. Here we show that GI-CT is more dose-efficient in imaging of breast tissue than conventional CT. Our system, based on a 70kVp X-ray tube source and commercially available gratings, demonstrated superior quality, in terms of adipose-to-glandular tissue contrast-to-noise ratio (CNR), of refraction-contrast compared to the attenuation images. The fusion of the two modes of contrast outperformed conventional CT for spatial resolutions better than 263μm and an average dose to the breast of 16mGy, which is in the clinical breast CT range. Our results show that grating interferometry can significantly reduce the dose, while maintaining the image quality, in diagnostic breast CT. Unlike conventional absorption-based CT, the sensitivity of refraction-based imaging is far from being fully exploited, and further progress will lead to significant improvements of clinical X-ray CT.
△ Less
Submitted 1 January, 2023;
originally announced January 2023.
-
Outdoor Systems Performace and Upgrade
Authors:
L. Lopes,
S. Andringa,
P. Assis,
A. Blanco,
N. Carolino,
M. A. Cerda,
F. Clemêncio,
R. Conceição,
O. Cunha,
C. Dobrigkeit,
M. Ferreira,
C. Loureiro,
L. Mendes,
J. C. Nogueira,
A. Pereira,
M. Pimenta,
J. Saraiva,
R. Sarmento,
P. Teixeira,
B. Tomé
Abstract:
Over the last two decades, the possibility of using RPCs in outdoors systems has increased considerably. Our group has participated in this effort having installed several systems and continues to work on their optimization, while simultaneously studying and develo** new approaches that can to use of RPCs in outdoor applications.
In particular, some detectors were deployed in the field at the…
▽ More
Over the last two decades, the possibility of using RPCs in outdoors systems has increased considerably. Our group has participated in this effort having installed several systems and continues to work on their optimization, while simultaneously studying and develo** new approaches that can to use of RPCs in outdoor applications.
In particular, some detectors were deployed in the field at the Pierre Auger Observatory in 2019 remained inactive, awaiting the commissioning of support systems. During the pandemic the detectors were left without gas flow for more than two years, but were recently reactivated with no major problems.
The LouMu project combines particle physics and geophysics in order to map large geologic structures, using Muon Tomography. The development of the RPC system used and the data from the last two years will be presented.
Finally, recent advances in a large area (1 m2) double gap-sealed RPC will be presented.
△ Less
Submitted 9 December, 2022;
originally announced December 2022.
-
An RPC-PET brain scanner demonstrator: first results
Authors:
Paulo Fonte,
Luís Lopes,
Rui Alves,
Nuno Carolino,
Paulo Crespo,
Miguel Couceiro,
Orlando Cunha,
Nuno Dias,
Nuno C. Ferreira,
Susete Fetal,
Ana L. Lopes,
Jan Michel,
Jorge Moreira,
Américo Pereira,
João Saraiva,
Carlos Silva,
Magda Silva,
Michael Traxler,
Antero Abrunhosa,
Alberto Blanco,
Miguel Castelo-Branco,
Mário Pimenta
Abstract:
We present first results from a Positron Emission Tomography (PET) scanner demonstrator based on Resistive Plate Chambers and specialized for brain imaging. The device features a 30 cm wide cubic field-of-view and each detector comprises 40 gas gaps with 3D location of the interaction point of the photon. Besides other imagery, we show that the reconstructed image resolution, as evaluated by a hot…
▽ More
We present first results from a Positron Emission Tomography (PET) scanner demonstrator based on Resistive Plate Chambers and specialized for brain imaging. The device features a 30 cm wide cubic field-of-view and each detector comprises 40 gas gaps with 3D location of the interaction point of the photon. Besides other imagery, we show that the reconstructed image resolution, as evaluated by a hot-rod phantom, is sub-millimetric, which is beyond the state-of-the-art of the standard PET technology for this application.
△ Less
Submitted 10 November, 2022;
originally announced November 2022.
-
Direct observation of magnetic monopole freedom in two-dimensional artificial spin ice
Authors:
D. G. Duarte,
L. B. de Oliveira,
F. S. Nascimento,
W. A. Moura-Melo,
A. R. Pereira,
1,
C. I. L. de Araujo
Abstract:
Magnetic monopole unpairing as a function of external magnetic fields is presented as a fingerprint of this emergent quasiparticles freedom in a two-dimensional artificial spin ice system. Such freedom, required for example for further application in magnetricity, is only possible due to ground-state degeneracy, which causes a decreasing of the string energy in rectangular geometries, designed to…
▽ More
Magnetic monopole unpairing as a function of external magnetic fields is presented as a fingerprint of this emergent quasiparticles freedom in a two-dimensional artificial spin ice system. Such freedom, required for example for further application in magnetricity, is only possible due to ground-state degeneracy, which causes a decreasing of the string energy in rectangular geometries, designed to allow highest equidistance among nanomagnets. We show by simulations that spin correlation in different rectangular artificial spin ices evolves from antiferromagnetic ordered magnetic structure to a ferromagnetic one, passing through an ice regime were pinch points related to Coulomb phase are observed. By measurements of magnetic force microscopy, we observe magnetic monopole creation, transport and annihilation in such systems with free monopoles created and transported throughout the sample without strings attached, as is commonly observed in conventional artificial spin ice systems.
△ Less
Submitted 13 July, 2022;
originally announced July 2022.
-
FEM modeling and simulation of broadband ultrasonic transducers with randomized inhomogeneous backing material
Authors:
Eduardo Moreno,
Wagner C. A. Pereira,
Marco Antonio von Kruger,
Lorenzo Leija,
Antonio Ramos
Abstract:
A FEM application for the accurate design of composite backing of ultrasonic transducers is presented. The idea is to obtain the dependence between the volume ratio of the tungsten powder in an epoxy matrix used as a backing and the final pulsed RF signal emitted by the backed transducer. An inhomogeneous material model for the backing was adopted instead of the classic complex geometrical FEM. Th…
▽ More
A FEM application for the accurate design of composite backing of ultrasonic transducers is presented. The idea is to obtain the dependence between the volume ratio of the tungsten powder in an epoxy matrix used as a backing and the final pulsed RF signal emitted by the backed transducer. An inhomogeneous material model for the backing was adopted instead of the classic complex geometrical FEM. The model was developed in Comsol 5.5 using two of its physics interfaces. The first based on classic FEM or continuous Galerkin for ultrasonic propagation in the backing and the second based on a discontinuous Galerkin option for fluid pulsed propagation. In this way it is possible to avoid the use of an impedance-based model. The calculations for the resulting bandwidth are good enough as predicted for Desilets for the 1D case by using the KLM circuital model. We worked in a 2D space, where the transducer face vibration is far away from the assumed piston-like considered by the unidimensional KLM model.
△ Less
Submitted 16 March, 2022;
originally announced March 2022.
-
Experimental Verification of Ill-defined Topologies and Energy Sinks in Electromagnetic Continua
Authors:
David E. Fernandes,
Ricardo A. M. Pereira,
Sylvain Lannebère,
Tiago A. Morgado,
Mário G. Silveirinha
Abstract:
In this article, it is experimentally verified that nonreciprocal photonic systems with a continuous translation symmetry may have an ill-defined topology. The topological classification of such systems is only feasible when the material response is regularized with a spatial-frequency cutoff. Here, we experimentally demonstrate that inserting a small air gap in between two materials may effective…
▽ More
In this article, it is experimentally verified that nonreciprocal photonic systems with a continuous translation symmetry may have an ill-defined topology. The topological classification of such systems is only feasible when the material response is regularized with a spatial-frequency cutoff. Here, we experimentally demonstrate that inserting a small air gap in between two materials may effectively imitate an idealized spatial cutoff that suppresses the nonreciprocal response for short wavelengths and regularizes the topology. Furthermore, it is experimentally verified that nonreciprocal systems with an ill-defined topology may be used to abruptly halt the energy flow in a unidirectional waveguide due to the violation of the bulk-edge correspondence. In particular, we report the formation of an energy sink that absorbs the incoming electromagnetic waves with a large field enhancement at the singularity.
△ Less
Submitted 30 December, 2021; v1 submitted 19 December, 2021;
originally announced December 2021.
-
Loss of structural balance in stock markets
Authors:
E. Ferreira,
S. Orbe,
J. Ascorbebeitia,
B. Álvarez Pereira,
E. Estrada
Abstract:
We use rank correlations as distance functions to establish the interconnectivity between stock returns, building weighted signed networks for the stocks of seven European countries, the US and Japan. We establish the theoretical relationship between the level of balance in a network and stock predictability, studying its evolution from 2005 to the third quarter of 2020. We find a clear balance-un…
▽ More
We use rank correlations as distance functions to establish the interconnectivity between stock returns, building weighted signed networks for the stocks of seven European countries, the US and Japan. We establish the theoretical relationship between the level of balance in a network and stock predictability, studying its evolution from 2005 to the third quarter of 2020. We find a clear balance-unbalance transition for six of the nine countries, following the August 2011 Black Monday in the US, when the Economic Policy Uncertainty index for this country reached its highest monthly level before the COVID-19 crisis. This sudden loss of balance is mainly caused by a reorganization of the market networks triggered by a group of low capitalization stocks belonging to the non-financial sector. After the transition, the stocks of companies in these groups become all negatively correlated between them and with most of the rest of the stocks in the market. The implied change in the network topology is directly related to a decrease in stocks predictability, a finding with novel important implications for asset allocation and portfolio hedging strategies.
△ Less
Submitted 12 April, 2021;
originally announced April 2021.
-
Folding instabilities in non-Newtonian viscous sheets: shear thinning and shear thickening effects
Authors:
Anselmo Pereira,
Nicolas Valade,
Elie Hachem,
Rudy Valette
Abstract:
In this work, we extend the analyses devoted to Newtonian viscous fluids previously reported by Ribe [Physical Review E 68, 036305 (2003)], by investigating shear thickening (dilatant) and shear thinning (pseudoplastic) effects on the development of folding instabilities in non-Newtonian viscous sheets of which viscosity is given by a power-law constitutive equation. Such instabilities are trigged…
▽ More
In this work, we extend the analyses devoted to Newtonian viscous fluids previously reported by Ribe [Physical Review E 68, 036305 (2003)], by investigating shear thickening (dilatant) and shear thinning (pseudoplastic) effects on the development of folding instabilities in non-Newtonian viscous sheets of which viscosity is given by a power-law constitutive equation. Such instabilities are trigged by compression stresses acting on viscous sheets that leave a channel at a very small initial velocity, fall, and then hit a solid surface or a fluid substrate. Our study is conducted through a mixed approach combining direct numerical simulations, energy budget analyses, scaling laws, and experiments. The numerical results are based on an adaptive variational multi-scale method for multiphase flows, while Carpobol gel sheets are considered for the conducted experiments. Two folding regimes are observed: (1) the viscous regime; and (2) the gravitational one. Interestingly, only the latter is affected by shear thinning/thickening manifestations within the material. In short, when gravity is balanced by viscous forces along the non-Newtonian viscous sheet, both the folding amplitude and the folding frequency are given by a power-law function of the sheet slenderness, the Galileo number (the ratio of the gravitational stress to the viscous one), and the flow behaviour index. Highly shear thickening materials develop large amplitude (and low frequency) instabilities, which, in contrast, tend to be suppressed by shear thinning effects, and eventually cease. Lastly, nonNewtonian effects on folding onset/cessation are also carefully explored. As a result, non-Newtonian folding onset and cessation criteria are presented.
△ Less
Submitted 14 February, 2021;
originally announced February 2021.
-
Prototype of an affordable pressure-controlled emergency mechanical ventilator for COVID-19
Authors:
Américo Pereira,
Luís Lopes,
Paulo Fonte,
Pedro Póvoa,
Telmo G. Santos,
Alberto Martinho,
Ângela Neves,
António Bugalho,
António Gabriel-Santos,
Gonçalo Gaspar Bentes Pimenta,
João Goês,
João Martins,
João Pedro Oliveira,
José Paulo Santos,
Luís C. Gil,
Miguel Onofre Domingues,
Orlando Cunha,
Pedro Pinheiro de Sousa,
Tiago A. Rodrigues,
Valdemar R. Duarte,
Antero Abrunhosa,
António Grilo,
João Agostinho do Nascimento,
Mário Pimenta
Abstract:
We present a viable prototype of a simple mechanical ventilator intended as a last resort to ventilate COVID-19 patients. The prototype implements the pressure-controlled continuous mandatory ventilation mode (PC-CMV) with settable breathing rates, inspiration/expiration time ratios and FiO2 modulation. Although safe, the design aims to minimize the use of technical components and those used are c…
▽ More
We present a viable prototype of a simple mechanical ventilator intended as a last resort to ventilate COVID-19 patients. The prototype implements the pressure-controlled continuous mandatory ventilation mode (PC-CMV) with settable breathing rates, inspiration/expiration time ratios and FiO2 modulation. Although safe, the design aims to minimize the use of technical components and those used are common in industry, so its construction may be possible in times of logistical shortage or disruption or in areas with reduced access to technical materials and at a moderate cost, affordable to lower income countries. Most of the device can be manufactured by modest technical means and construction plans are provided.
△ Less
Submitted 21 July, 2020; v1 submitted 1 April, 2020;
originally announced April 2020.
-
Lévy flights for light in ordered lasers
Authors:
Erick G. Rocha,
Emanuel P. Santos,
Bruno J. dos Santos,
Samuel S. de Albuquerque,
Pablo I. R. Pincheira,
Carlos A. Pereira,
André L. Moura
Abstract:
Lévy flights for light have been demonstrated in disordered systems with and without optical gain, and remained unobserved in ordered ones. In the present letter, we investigate, numerically and experimentally, Lévy flights for light in ordered systems due to an ordered (conventional) laser. The statistical analysis was performed on the intensity fluctuations of the output spectra upon repeated id…
▽ More
Lévy flights for light have been demonstrated in disordered systems with and without optical gain, and remained unobserved in ordered ones. In the present letter, we investigate, numerically and experimentally, Lévy flights for light in ordered systems due to an ordered (conventional) laser. The statistical analysis was performed on the intensity fluctuations of the output spectra upon repeated identical experimental realizations. We found out that the optical gain and the mirrors reflectivity are critical parameters governing the fluctuation statistics. We identified Lévy regimes for gain around the laser threshold, and Gaussian-Lévy-Gaussian crossovers were unveiling when increasing the gain from below to above the threshold. The experimental results were corroborated by Monte Carlo simulations, and the fluctuations were associated to a Langevin noise source that takes into account the randomness of the spontaneous emission, which seeds the laser emission and can cause large fluctuations of the output spectra from shot-to-shot under identical experimental realizations.
△ Less
Submitted 21 November, 2019;
originally announced November 2019.
-
Beyond the maximum drag reduction asymptote: the pseudo-laminar state
Authors:
Anselmo Pereira,
Roney L. Thompson,
Gilmar Mompean
Abstract:
Recent experiments indicated that polymers can reduce the turbulent drag beyond the asymptotic limit known as the MDR, leading to a laminar flow. In this Letter, we show through direct numerical simulations that, when the MDR is exceeded, the flow can remain in a laminar-like regime for a very long period without being truly laminar. During this period called pseudo-laminar state, a transient beha…
▽ More
Recent experiments indicated that polymers can reduce the turbulent drag beyond the asymptotic limit known as the MDR, leading to a laminar flow. In this Letter, we show through direct numerical simulations that, when the MDR is exceeded, the flow can remain in a laminar-like regime for a very long period without being truly laminar. During this period called pseudo-laminar state, a transient behavior is observed as a consequence of a small rate of polymer energy injected into the flow. Later on, flow instabilities develop across the channel, finally triggering elastoinertial turbulence.
△ Less
Submitted 1 November, 2019;
originally announced November 2019.
-
Dark matter search in a Beam-Dump eXperiment (BDX) at Jefferson Lab -- 2018 update to PR12-16-001
Authors:
M. Battaglieri,
A. Bersani,
G. Bracco,
B. Caiffi,
A. Celentano,
R. De Vita,
L. Marsicano,
P. Musico,
F. Panza,
M. Ripani,
E. Santopinto,
M. Taiuti,
V. Bellini,
M. Bondi',
P. Castorina,
M. De Napoli,
A. Italiano,
V. Kuznetzov,
E. Leonora,
F. Mammoliti,
N. Randazzo,
L. Re,
G. Russo,
M. Russo,
A. Shahinyan
, et al. (100 additional authors not shown)
Abstract:
This document complements and completes what was submitted last year to PAC45 as an update to the proposal PR12-16-001 "Dark matter search in a Beam-Dump eXperiment (BDX)" at Jefferson Lab submitted to JLab-PAC44 in 2016. Following the suggestions contained in the PAC45 report, in coordination with the lab, we ran a test to assess the beam-related backgrounds and validate the simulation framework…
▽ More
This document complements and completes what was submitted last year to PAC45 as an update to the proposal PR12-16-001 "Dark matter search in a Beam-Dump eXperiment (BDX)" at Jefferson Lab submitted to JLab-PAC44 in 2016. Following the suggestions contained in the PAC45 report, in coordination with the lab, we ran a test to assess the beam-related backgrounds and validate the simulation framework used to design the BDX experiment. Using a common Monte Carlo framework for the test and the proposed experiment, we optimized the selection cuts to maximize the reach considering simultaneously the signal, cosmic-ray background (assessed in Catania test with BDX-Proto) and beam-related backgrounds (irreducible NC and CC neutrino interactions as determined by simulation). Our results confirmed what was presented in the original proposal: with 285 days of a parasitic run at 65 $μ$A (corresponding to $10^{22}$ EOT) the BDX experiment will lower the exclusion limits in the case of no signal by one to two orders of magnitude in the parameter space of dark-matter coupling versus mass.
△ Less
Submitted 8 October, 2019;
originally announced October 2019.
-
New and fast route to black TiO2 based on hollow cathode H2 plasma
Authors:
A. Godoy Jr,
A. L. J. Pereira,
M. C. Gome,
R. S. Pessoa,
D. M. G. Leite,
G. Petraconi Filho,
W. Miyakawa,
A S. da Silva Sobrinho
Abstract:
In this work, we demonstrate a new method to produce black TiO2 from pristine anatase TiO2 films. It consists on the immersion of TiO2 films in a hollow cathode H2 RF plasma for a few minutes, resulting in an efficient blackening of TiO2. In this study, the pristine anatase TiO2 films were grown by magnetron sputtering onto cover glass and c-Si substrates and then annealed at 450 °C for 2 h. Befor…
▽ More
In this work, we demonstrate a new method to produce black TiO2 from pristine anatase TiO2 films. It consists on the immersion of TiO2 films in a hollow cathode H2 RF plasma for a few minutes, resulting in an efficient blackening of TiO2. In this study, the pristine anatase TiO2 films were grown by magnetron sputtering onto cover glass and c-Si substrates and then annealed at 450 °C for 2 h. Before and after the hollow cathode H2 plasma treatment, the samples were characterized by profilometry, UV-Vis spectrophotometry, X-ray diffraction, Raman spectroscopy, X-ray photoelectron spectroscopy, field emission scanning electron and atomic force microscopies, and four-point probe measurements. The results show that the obtained black TiO2 thin films have a significant light absorption on the whole solar spectrum, a very low sheet resistance, and also a relatively high surface area when compared to the pristine TiO2. All these characteristics lead to an important improvement on their photocatalytic activity, as measured by the degradation rate of methylene blue under UV irradiation.
△ Less
Submitted 10 September, 2019;
originally announced September 2019.
-
Freestanding and flexible composites of magnetocaloric Gd$_5$(Si,Ge)$_4$ microparticles embedded in thermoplastic poly(methyl methacrylate) matrix
Authors:
Vivian M. Andrade,
Nathalie B. Barroca,
Ana L. Pires,
João H. Belo,
João P. Araújo,
André M. Pereira
Abstract:
The implementation of processed magnetic materials onto thermoplastics can be an approach for practical application of brittle intermetallic materials with the advantage of enlarging the range of applications. In the present work, we evaluate the effect of blending magnetocaloric Gd$_5$Si$_{2.4}$Ge$_{1.6}$ micrometric particles with 3.4 $μ$m in different weight fractions onto a flexible, transpare…
▽ More
The implementation of processed magnetic materials onto thermoplastics can be an approach for practical application of brittle intermetallic materials with the advantage of enlarging the range of applications. In the present work, we evaluate the effect of blending magnetocaloric Gd$_5$Si$_{2.4}$Ge$_{1.6}$ micrometric particles with 3.4 $μ$m in different weight fractions onto a flexible, transparent and non-magnetic poly(methyl methacrylate) (PMMA). A close to homogeneous grain distribution along the polymer surface were achiever by using a simple solvent casting method for evaluation of their magnetocaloric properties. From XRD analysis, it was found a relative unit cell volume reduction of $\sim$2.5$\times$10$^3$ ppm for the composite with 70 wt.\% of powder as a result of interfacial interactions between the components. Although PMMA does not influence the magnetic nature of microparticles main phase, a reduction on the amount of secondary monoclinic phase occurs for all produced composite samples. As a consequence, a weakening on the effect of secondary phases on the micropowder magnetocaloric response is observed as a result of hydrostatic pressure from the difference between thermal expansions of matrix and filler.
△ Less
Submitted 8 August, 2019;
originally announced August 2019.
-
Variational Optimization Based Reinforcement Learning for Infinite Dimensional Stochastic Systems
Authors:
Ethan N. Evans,
Marcus A. Pereira,
George I. Boutselis,
Evangelos A. Theodorou
Abstract:
Systems involving Partial Differential Equations (PDEs) have recently become more popular among the machine learning community. However prior methods usually treat infinite dimensional problems in finite dimensions with Reduced Order Models. This leads to committing to specific approximation schemes and subsequent derivation of control laws. Additionally, prior work does not consider spatio-tempor…
▽ More
Systems involving Partial Differential Equations (PDEs) have recently become more popular among the machine learning community. However prior methods usually treat infinite dimensional problems in finite dimensions with Reduced Order Models. This leads to committing to specific approximation schemes and subsequent derivation of control laws. Additionally, prior work does not consider spatio-temporal descriptions of noise that realistically represent the stochastic nature of physical systems. In this paper we suggest a new reinforcement learning framework that is mostly model-free for Stochastic PDEs with additive spacetime noise, based on variational optimization in infinite dimensions. In addition, our algorithm incorporates sparse representations that allow for efficient learning of feedback policies in high dimensions. We demonstrate the efficacy of the proposed approach with several simulated experiments on a variety of SPDEs.
△ Less
Submitted 9 July, 2019;
originally announced July 2019.
-
Uneven rock-paper-scissors models: patterns and coexistence
Authors:
J. Menezes,
B. Moura,
T. A. Pereira
Abstract:
We study a class of the stochastic May-Leonard models, with three species dominating each other in a cyclic nonhierarchical way, according to the rock-paper-scissors game. We introduce an unevenness in the system, by considering that one of the species is weaker because of a lower selection probability. The simulation results show that the pattern formation is drastically affected by the presence…
▽ More
We study a class of the stochastic May-Leonard models, with three species dominating each other in a cyclic nonhierarchical way, according to the rock-paper-scissors game. We introduce an unevenness in the system, by considering that one of the species is weaker because of a lower selection probability. The simulation results show that the pattern formation is drastically affected by the presence of the weaker species, with no spiral waves arising immediately from random initial conditions. Instead, single-species spatial domains cyclically dominate the entire territory until a region occupied by the weaker species is sufficiently narrow to be crossed by individuals without being selected. This leads to the appearance of spatial patterns responsible for the species coexistence. We verify that the asymmetry in the selection probabilities leads to different spatial autocorrelation function and average relative species abundances. Finally, we investigate the coexistence probability and show that the surviving species depends on the level of unevenness of the model and the mobility of individuals.
△ Less
Submitted 14 May, 2019; v1 submitted 14 April, 2019;
originally announced April 2019.
-
Bringing The Apple to the Moon
Authors:
Joao A M Pereira
Abstract:
Newtonian gravity can be regarded as a hypothetic-deductive system where the inverse square law is the starting point from which gravitational phenomena are deduced. This operational form of presenting gravity endorses problem solving and seems to be predominant in the teaching practice. In contrast, regarding phenomena as a source for the development of the theory is also possible, of course, and…
▽ More
Newtonian gravity can be regarded as a hypothetic-deductive system where the inverse square law is the starting point from which gravitational phenomena are deduced. This operational form of presenting gravity endorses problem solving and seems to be predominant in the teaching practice. In contrast, regarding phenomena as a source for the development of the theory is also possible, of course, and can be advantageous to scientific education since it deals with model conception and construction. This article intends to introduce undergraduates to Newtonian gravity using its empirical basis, i.e. the free fall and the planetary motion, to deduce the universal law of gravitation. Additionally, an elemental analysis of the theory's structure is presented. It also steps into the modern interpretation of gravitational phenomena i.e. Einstein's general relativity, including a discussion on the instantaneous action at a distance in this context. This didactic presentation of the theory of gravity differs from the standard approach usually found in common textbooks. It is designed to reach a threefold equality, similar to those applied in the method of separation of variables in partial differential equations, where G is treated as a separation constant. By doing so, the universality of the gravitation constant emerges as a conclusion rather than a statement. It is also meant to create a perception on how imagination can be helpful in discovering Physical laws.
△ Less
Submitted 10 June, 2019; v1 submitted 19 March, 2019;
originally announced March 2019.
-
Giant optical nonlinearity cancellation in quantum wells
Authors:
S. Houver,
A. Lebreton,
T. A. S. Pereira,
G. Xu,
R. Colombelli,
I. Kundu,
L. H. Li,
E. H. Linfield,
A. G. Davies,
J. Mangeney,
J. Tignon,
R. Ferreira,
S. S. Dhillon
Abstract:
Second-order optical nonlinearities can be greatly enhanced by orders of magnitude in resonantly excited nanostructures, theoretically predicted and experimentally investigated in a variety of semiconductor systems. These resonant nonlinearities continually attract attention, particularly in newly discovered materials, but tend not to be as efficient as currently predicted. This limits their explo…
▽ More
Second-order optical nonlinearities can be greatly enhanced by orders of magnitude in resonantly excited nanostructures, theoretically predicted and experimentally investigated in a variety of semiconductor systems. These resonant nonlinearities continually attract attention, particularly in newly discovered materials, but tend not to be as efficient as currently predicted. This limits their exploitation in frequency conversion. Here, we present a clear-cut theoretical and experimental demonstration that the second-order nonlinear susceptibility can vary by orders of magnitude as a result of giant cancellation effects in systems with many confined quantum states. Using terahertz quantum cascade lasers as a model source to investigate interband and intersubband resonant nonlinearities, we show that these giant cancellations are a result of interfering second-order nonlinear contributions of light and heavy hole states. As well as of importance to understand and engineer the resonant optical properties of materials, this work can be employed as a new, extremely sensitive tool to elucidate the bandstructure properties of complex quantum well systems.
△ Less
Submitted 4 January, 2019;
originally announced January 2019.
-
Expanding spatial domains and transient scaling regimes in populations with local cyclic competition
Authors:
P. P. Avelino,
J. Menezes,
B. F. de Oliveira,
T. A. Pereira
Abstract:
We investigate a six-species class of May-Leonard models leading to formation two types of competing spatial domains, each one inhabited by three-species with their own internal cyclic rock-paper-scissors dynamics. We study the resulting population dynamics using stochastic numerical simulations in two-dimensional space. We find that as three-species domains shrink, there is an increasing probabil…
▽ More
We investigate a six-species class of May-Leonard models leading to formation two types of competing spatial domains, each one inhabited by three-species with their own internal cyclic rock-paper-scissors dynamics. We study the resulting population dynamics using stochastic numerical simulations in two-dimensional space. We find that as three-species domains shrink, there is an increasing probability of extinction of two of the species inhabiting the domain, with the consequent creation of one-species domains. We determine the critical initial radius beyond which these one-species spatial domains are expected to expand. We further show that a transient scaling regime, with a slower average growth rate of the characteristic length scale $L$ of the spatial domains with time $t$, takes place before the transition to a standard $L \propto t^{1/2}$ scaling law, resulting in an extended period of coexistence.
△ Less
Submitted 28 July, 2019; v1 submitted 18 November, 2018;
originally announced November 2018.
-
The novel photon detectors based on MPGD technologies for the upgrade of COMPASS RICH-1
Authors:
J. Agarwala,
M. Alexeev,
C. D. R. Azevedo,
R. Birsa,
F. Bradamante,
A. Bressan,
C. Chatterjee,
M. Chiosso,
A. Cicuttin,
P. Ciliberti,
M. L. Crespo,
S. Dalla Torre,
S. S. Dasgupta,
O. Denisov,
M. Finger,
M. Finger Jr.,
B. Gobbo,
M. Gregori,
G. Hamar,
S. Levorato,
A. Maggiora,
A. Martin,
G. Menon,
J. Novy,
D. Panzieri
, et al. (10 additional authors not shown)
Abstract:
The RICH-1 Detector of the COMPASS experiment at CERN SPS has undergone an important upgrade in 2016. Four new photon detectors, based on MPGD technology and covering a total active area larger than 1.2~$m^2$ have replaced the previously used MWPC-based photon detectors. The new detector architecture, resulting from a dedicated, eight years long, R\&D program, consists in a hybrid MPGD combination…
▽ More
The RICH-1 Detector of the COMPASS experiment at CERN SPS has undergone an important upgrade in 2016. Four new photon detectors, based on MPGD technology and covering a total active area larger than 1.2~$m^2$ have replaced the previously used MWPC-based photon detectors. The new detector architecture, resulting from a dedicated, eight years long, R\&D program, consists in a hybrid MPGD combination of two THGEMs and a Micromegas stage; the first THGEM, coated with a CsI layer, acts as a reflective photocathode. The signals are extracted from the anode pads by capacitive coupling and read-out by analog front-end electronics based on the APV25 chip. The new COMPASS RICH-1 photon detectors are described in detail: the detector design, the engineering aspects, the mass production, and the quality assessment are discussed. The assembly of the MPGD components and the installation of the new detectors are illustrated together with the main aspects of the commissioning. Preliminary indication of performance results are also presented.
△ Less
Submitted 16 April, 2018;
originally announced April 2018.
-
An Electromagnet-Based Magnetically-Activated Thermal Switch Without Moving Parts
Authors:
C. Rodrigues,
M. M. Dias,
L. Martins,
J. P. Araujo,
J. C. R. E Oliveira,
A. M. Pereira,
J. Ventura
Abstract:
With the ever increasing power dissipation in electrical devices, new thermal management solutions are in high demand to maintain an optimal operating temperature and efficient performance. In particular, recently developed magnetically-activated thermal switches (MATSs) provide an alternative to existing devices, using the magnetic and thermal properties of superparamagnetic nanofluids to dissipa…
▽ More
With the ever increasing power dissipation in electrical devices, new thermal management solutions are in high demand to maintain an optimal operating temperature and efficient performance. In particular, recently developed magnetically-activated thermal switches (MATSs) provide an alternative to existing devices, using the magnetic and thermal properties of superparamagnetic nanofluids to dissipate heat in a controlled manner. However, the presence of moving parts is a major drawback in those systems that must still be addressed. Herein, we present a compact and automatized MATS composed by an encapsulated superparamagnetic nanofluid and an electromagnet allowing to activate the MATS without any moving part. We investigate the effect of different temperature gradients (40, 26 and 10 C) and powers applied to the coil (6.5, 15, 25 and 39 W) on the performance of this novel MATS. The results show that the highest (44.4$) and fastest (0.6 C/s) temperature variation occur for the highest studied temperature gradient. On the other hand, with increasing power, there is also an increase in the efficiency of the heat exchange process between the two surfaces. These results remove one of the main barriers preventing the actual application of magnetic thermal switches and opens new venues for the design of efficient thermal management devices.
△ Less
Submitted 28 March, 2018;
originally announced March 2018.
-
MARTA: A high-energy cosmic-ray detector concept with high-accuracy muon measurement
Authors:
P. Abreu,
S. Andringa,
P. Assis,
A. Blanco,
V. Barbosa Martins,
P. Brogueira,
N. Carolino,
L. Cazon,
M. Cerda,
G. Cernicchiaro,
R. Colalillo,
R. Conceição,
O. Cunha,
R. M. de Almeida,
V. de Souza,
F. Diogo,
C. Dobrigkeit,
J. Espadanal,
C. Espirito-Santo,
M. Ferreira,
P. Ferreira,
P. Fonte,
U. Giaccari,
P. Gonçalves,
F. Guarino
, et al. (20 additional authors not shown)
Abstract:
A new concept for the direct measurement of muons in air showers is presented. The concept is based on resistive plate chambers (RPCs), which can directly measure muons with very good space and time resolution. The muon detector is shielded by placing it under another detector able to absorb and measure the electromagnetic component of the showers such as a water-Cherenkov detector, commonly used…
▽ More
A new concept for the direct measurement of muons in air showers is presented. The concept is based on resistive plate chambers (RPCs), which can directly measure muons with very good space and time resolution. The muon detector is shielded by placing it under another detector able to absorb and measure the electromagnetic component of the showers such as a water-Cherenkov detector, commonly used in air shower arrays. The combination of the two detectors in a single, compact detector unit provides a unique measurement that opens rich possibilities in the study of air showers.
△ Less
Submitted 20 April, 2018; v1 submitted 20 December, 2017;
originally announced December 2017.
-
Near-infrared holographic photorefractive recording under applied electric field in undoped Bi$_{12}$TiO$_{20}$ sillenite crystal
Authors:
André L. Moura,
Alexsandro F. Pereira,
Askery Canabarro,
Jesiel F. Carvalho,
Ivan de Oliveira,
Pedro V. dos Santos
Abstract:
Direct holographic recording in undoped Bi$_{12}$TiO$_{20}$ crystal at 1064 nm is investigated aiming the characterization of diffraction efficiency under action of applied dc electric field ($E_0$). An enhancement of 12-fold in the diffraction efficiency was revealed when $E_0$ increased from 0.0 to 4.2 kV/cm. The theoretical dependence of the diffraction efficiency upon $E_0$ was investigated us…
▽ More
Direct holographic recording in undoped Bi$_{12}$TiO$_{20}$ crystal at 1064 nm is investigated aiming the characterization of diffraction efficiency under action of applied dc electric field ($E_0$). An enhancement of 12-fold in the diffraction efficiency was revealed when $E_0$ increased from 0.0 to 4.2 kV/cm. The theoretical dependence of the diffraction efficiency upon $E_0$ was investigated using the standard model for photorefractivity and the results showed a good experimental data fitting, allowing the computation of the effective trap concentration $(N_D$$)_{eff}$ $\approx$ $5.3\times 10^{15}$ cm$^{-3}$ which is responsible by the recording mechanism into the BTO crystal sample. The type of charge carrier involved in the recording mechanism in the nearinfrared region is also discussed.
△ Less
Submitted 16 June, 2020; v1 submitted 5 December, 2017;
originally announced December 2017.
-
Dark matter search in a Beam-Dump eXperiment (BDX) at Jefferson Lab: an update on PR12-16-001
Authors:
M. Battaglieri,
A. Bersani,
G. Bracco,
B. Caiffi,
A. Celentano,
R. De Vita,
L. Marsicano,
P. Musico,
M. Osipenko,
F. Panza,
M. Ripani,
E. Santopinto,
M. Taiuti,
V. Bellini,
M. Bondi',
P. Castorina,
M. De Napoli,
A. Italiano,
V. Kuznetzov,
E. Leonora,
F. Mammoliti,
N. Randazzo,
L. Re,
G. Russo,
M. Russo
, et al. (101 additional authors not shown)
Abstract:
This document is an update to the proposal PR12-16-001 Dark matter search in a Beam-Dump eXperiment (BDX) at Jefferson Lab submitted to JLab-PAC44 in 2016 reporting progress in addressing questions raised regarding the beam-on backgrounds. The concerns are addressed by adopting a new simulation tool, FLUKA, and planning measurements of muon fluxes from the dump with its existing shielding around t…
▽ More
This document is an update to the proposal PR12-16-001 Dark matter search in a Beam-Dump eXperiment (BDX) at Jefferson Lab submitted to JLab-PAC44 in 2016 reporting progress in addressing questions raised regarding the beam-on backgrounds. The concerns are addressed by adopting a new simulation tool, FLUKA, and planning measurements of muon fluxes from the dump with its existing shielding around the dump. First, we have implemented the detailed BDX experimental geometry into a FLUKA simulation, in consultation with experts from the JLab Radiation Control Group. The FLUKA simulation has been compared directly to our GEANT4 simulations and shown to agree in regions of validity. The FLUKA interaction package, with a tuned set of biasing weights, is naturally able to generate reliable particle distributions with very small probabilities and therefore predict rates at the detector location beyond the planned shielding around the beam dump. Second, we have developed a plan to conduct measurements of the muon ux from the Hall-A dump in its current configuration to validate our simulations.
△ Less
Submitted 8 January, 2018; v1 submitted 5 December, 2017;
originally announced December 2017.
-
Status of COMPASS RICH-1 Upgrade with MPGD-based Photon Detectors
Authors:
M. Alexeev,
R Birsa,
F. Bradamante,
A. Bressan,
M. Chiosso,
P. Ciliberti,
S. Dalla Torre,
S. Dasgupta,
O. Denisov,
M. Finger,
M. Finger Jr,
H. Fishcher,
B. Gobbo,
M. Gregori,
G. Hamar,
F. Herrmann,
K. Koenigsmann,
S. Levorato,
A. Maggiora,
N. Makke,
A. Martin,
G. Menon,
J. Novy,
D. Panzieri,
F. A. Pereira
, et al. (10 additional authors not shown)
Abstract:
A Set of new MPGD-based Photon Detectors is being built for the upgrade of COMPASS RICH-1. The detectors cover a total active area of 1.4 m$^2$ and are based on a hybrid architecture consisting of two THGEM layers and a Micromegas. A CsI film on one THGEM acts as a reflective photocathode. The characteristics of the detector, the production of the components and their validation tests are describe…
▽ More
A Set of new MPGD-based Photon Detectors is being built for the upgrade of COMPASS RICH-1. The detectors cover a total active area of 1.4 m$^2$ and are based on a hybrid architecture consisting of two THGEM layers and a Micromegas. A CsI film on one THGEM acts as a reflective photocathode. The characteristics of the detector, the production of the components and their validation tests are described in detail.
△ Less
Submitted 25 October, 2017;
originally announced October 2017.
-
Novel MPGD based Detectors of Single Photons in COMPASS RICH-1
Authors:
J. Agarwala M. Alexeev,
C. D. R. Azevedo,
R. Birsa,
F. Bradamante,
A. Bressan,
M. Buchele,
C. Chatterjee,
M. Chiosso,
P. Ciliberti,
S. Dalla Torre,
S. Dasgupta,
O. Denisov,
M. Finger,
M. Finger Jr.,
H. Fischer,
B. Gobbo,
M. Gregori,
G. Hamar,
F. Herrmann,
S. Levorato,
A. Maggiora,
N. Makke,
A. Martin,
G. Menon,
J. Novy
, et al. (12 additional authors not shown)
Abstract:
COMPASS is a fixed target experiment at CERN SPS aimed to study Hadron Structure and Spectroscopy. Hadron Identification in the momentum range between 3 and 55 GeV/c is provided by a large gaseous Ring Imaging Cherenkov Counter (RICH-1). To cope with the challenges imposed by the new physics program of COMPASS, RICH-1 have been upgraded by replacing four MWPCs based photon detectors with newly dev…
▽ More
COMPASS is a fixed target experiment at CERN SPS aimed to study Hadron Structure and Spectroscopy. Hadron Identification in the momentum range between 3 and 55 GeV/c is provided by a large gaseous Ring Imaging Cherenkov Counter (RICH-1). To cope with the challenges imposed by the new physics program of COMPASS, RICH-1 have been upgraded by replacing four MWPCs based photon detectors with newly developed MPGD based photon detectors. The architecture of the novel detectors is a hybrid combination of two layers of THGEMs and a MicroMegas. The top of the first THGEM is coated with CsI acting as a reflective photo-cathode. The anode is segmented in pads capacitively coupled to the APV-25 based readout. The new hybrid detectors have been commissioned during 2016 COMPASS data taking and stably operated during 2017 run. In this paper all aspects of the novel photon detectors for COMPASS RICH-1 are discussed.
△ Less
Submitted 24 October, 2017;
originally announced October 2017.
-
Autonomous RPCs for a Cosmic Ray ground array
Authors:
Pedro Assis,
Alberto Blanco,
Nuno Carolino,
Ruben Conceição,
Orlando Cunha,
Carola Dobrigkeit,
Miguel Ferreira,
Paulo Fonte,
Luis Lopes,
Ricardo Luz,
Victor Barbosa Martins,
Luis Mendes,
Américo Pereira,
Mário Pimenta,
Raul Sarmento,
Ronald Shellard,
Vitor de Souza,
Bernardo Tomé
Abstract:
We report on the behaviour of Resistive Plate Chambers (RPC) developed for muon detection in ultra-high energy cosmic ray (UHECR) experiments. The RPCs were developed for the MARTA project and were tested on field conditions. These RPCs cover an area of $1.5 \times 1.2\,{m^2}$ and are instrumented with 64 pickup electrodes providing a segmentation better than $20\,$cm. By shielding the detector un…
▽ More
We report on the behaviour of Resistive Plate Chambers (RPC) developed for muon detection in ultra-high energy cosmic ray (UHECR) experiments. The RPCs were developed for the MARTA project and were tested on field conditions. These RPCs cover an area of $1.5 \times 1.2\,{m^2}$ and are instrumented with 64 pickup electrodes providing a segmentation better than $20\,$cm. By shielding the detector units with enough slant mass to absorb the electromagnetic component in the air showers, a clean measurement of the muon content is allowed, a concept to be implemented in a next generation of UHECR experiments. The operation of a ground array detector poses challenging demands, as the RPC must operate remotely under extreme environmental conditions, with limited budgets for power and minimal maintenance. The RPC, DAQ, High Voltage and monitoring systems are enclosed in an aluminium-sealed case, providing a compact and robust unit suited for outdoor environments, which can be easily deployed and connected. The RPCs developed at LIP-Coimbra are able to operate using a very low gas flux, which allows running them for few years with a small gas reservoir. Several prototypes have already been built and tested both in the laboratory and outdoors. We report on the most recent tests done in the field that show that the developed RPCs have operated in a stable way for more than 2 years in field conditions.
△ Less
Submitted 27 September, 2017;
originally announced September 2017.
-
Spectral Calibration of the Fluorescence Telescopes of the Pierre Auger Observatory
Authors:
The Pierre Auger Collaboration,
A. Aab,
P. Abreu,
M. Aglietta,
I. Al Samarai,
I. F. M. Albuquerque,
I. Allekotte,
A. Almela,
J. Alvarez Castillo,
J. Alvarez-Muñiz,
G. A. Anastasi,
L. Anchordoqui,
B. Andrada,
S. Andringa,
C. Aramo,
F. Arqueros,
N. Arsene,
H. Asorey,
P. Assis,
J. Aublin,
G. Avila,
A. M. Badescu,
A. Balaceanu,
F. Barbato,
R. J. Barreira Luz
, et al. (381 additional authors not shown)
Abstract:
We present a novel method to measure precisely the relative spectral response of the fluorescence telescopes of the Pierre Auger Observatory. We used a portable light source based on a xenon flasher and a monochromator to measure the relative spectral efficiencies of eight telescopes in steps of 5 nm from 280 nm to 440 nm. Each point in a scan had approximately 2 nm FWHM out of the monochromator.…
▽ More
We present a novel method to measure precisely the relative spectral response of the fluorescence telescopes of the Pierre Auger Observatory. We used a portable light source based on a xenon flasher and a monochromator to measure the relative spectral efficiencies of eight telescopes in steps of 5 nm from 280 nm to 440 nm. Each point in a scan had approximately 2 nm FWHM out of the monochromator. Different sets of telescopes in the observatory have different optical components, and the eight telescopes measured represent two each of the four combinations of components represented in the observatory. We made an end-to-end measurement of the response from different combinations of optical components, and the monochromator setup allowed for more precise and complete measurements than our previous multi-wavelength calibrations. We find an overall uncertainty in the calibration of the spectral response of most of the telescopes of 1.5% for all wavelengths; the six oldest telescopes have larger overall uncertainties of about 2.2%. We also report changes in physics measureables due to the change in calibration, which are generally small.
△ Less
Submitted 2 October, 2017; v1 submitted 5 September, 2017;
originally announced September 2017.
-
Muon Counting using Silicon Photomultipliers in the AMIGA detector of the Pierre Auger Observatory
Authors:
The Pierre Auger Collaboration,
A. Aab,
P. Abreu,
M. Aglietta,
E. J. Ahn,
I. Al Samarai,
I. F. M. Albuquerque,
I. Allekotte,
P. Allison,
A. Almela,
J. Alvarez Castillo,
J. Alvarez-Muñiz,
M. Ambrosio,
G. A. Anastasi,
L. Anchordoqui,
B. Andrada,
S. Andringa,
C. Aramo,
F. Arqueros,
N. Arsene,
H. Asorey,
P. Assis,
J. Aublin,
G. Avila,
A. M. Badescu
, et al. (400 additional authors not shown)
Abstract:
AMIGA (Auger Muons and Infill for the Ground Array) is an upgrade of the Pierre Auger Observatory designed to extend its energy range of detection and to directly measure the muon content of the cosmic ray primary particle showers. The array will be formed by an infill of surface water-Cherenkov detectors associated with buried scintillation counters employed for muon counting. Each counter is com…
▽ More
AMIGA (Auger Muons and Infill for the Ground Array) is an upgrade of the Pierre Auger Observatory designed to extend its energy range of detection and to directly measure the muon content of the cosmic ray primary particle showers. The array will be formed by an infill of surface water-Cherenkov detectors associated with buried scintillation counters employed for muon counting. Each counter is composed of three scintillation modules, with a 10 m$^2$ detection area per module. In this paper, a new generation of detectors, replacing the current multi-pixel photomultiplier tube (PMT) with silicon photo sensors (aka. SiPMs), is proposed. The selection of the new device and its front-end electronics is explained. A method to calibrate the counting system that ensures the performance of the detector is detailed. This method has the advantage of being able to be carried out in a remote place such as the one where the detectors are deployed. High efficiency results, i.e. 98 % efficiency for the highest tested overvoltage, combined with a low probability of accidental counting ($\sim$2 %), show a promising performance for this new system.
△ Less
Submitted 4 October, 2017; v1 submitted 17 March, 2017;
originally announced March 2017.
-
Interface networks in models of competing alliances
Authors:
T. A. Pereira,
J. Menezes,
L. Losano
Abstract:
We study a subclass of the May-Leonard stochastic model with an arbitrary, even number of species, leading to the arising of two competing partnerships where individuals are indistinguishable. By carrying out a series of accurate numerical stochastic simulations, we show that alliances compete each other forming spatial domains bounded by inter- faces of empty sites. We solve numerically the mean…
▽ More
We study a subclass of the May-Leonard stochastic model with an arbitrary, even number of species, leading to the arising of two competing partnerships where individuals are indistinguishable. By carrying out a series of accurate numerical stochastic simulations, we show that alliances compete each other forming spatial domains bounded by inter- faces of empty sites. We solve numerically the mean field equations associated to the stochastic model in one and two spatial dimensions. We demonstrate that the stationary interface profile presents topological properties which are related to the asymptotic spa- tial distribution of species of enemy alliances far away from the interface core. Finally, we introduce a theoretical approach to model the formation of stable interfaces using spontaneous breaking of a discrete symmetry. We show that all the results provided by the soliton topological model, presented here for the very first time, are in agreement with the stochastic simulations and may be used as a tool for understanding the complex biodiversity in Nature.
△ Less
Submitted 17 March, 2018; v1 submitted 29 December, 2016;
originally announced December 2016.
-
In-beam evaluation of a medium-size Resistive-Plate WELL gaseous particle detector
Authors:
L. Moleri,
F. D. Amaro,
L. Arazi,
C. D. R. Azevedo,
A. Breskin,
A. E. C. Coimbra,
E. Oliveri,
F. A. Pereira,
D. Shaked Renous,
J. Schaarschmidt,
J. M. F. dos Santos,
J. F. C. A. Veloso,
S. Bressler
Abstract:
In-beam evaluation of a fully-equipped medium-size 30$\times$30 cm$^2$ Resistive Plate WELL (RPWELL) detector is presented. It consists here of a single element gas-avalanche multiplier with Semitron ESD225 resistive plate, 1 cm$^2$ readout pads and APV25/SRS electronics. Similarly to previous results with small detector prototypes, stable operation at high detection efficiency (>98%) and low aver…
▽ More
In-beam evaluation of a fully-equipped medium-size 30$\times$30 cm$^2$ Resistive Plate WELL (RPWELL) detector is presented. It consists here of a single element gas-avalanche multiplier with Semitron ESD225 resistive plate, 1 cm$^2$ readout pads and APV25/SRS electronics. Similarly to previous results with small detector prototypes, stable operation at high detection efficiency (>98%) and low average pad multiplicity (~1.2) were recorded with 150 GeV muon and high-rate pion beams, in Ne/(5%CH$_4$), Ar/(5%CH$_4$) and Ar/(7%CO$_2$). This is an important step towards the realization of robust detectors suitable for applications requiring large-area coverage; among them Digital Hadron Calorimetry.
△ Less
Submitted 8 September, 2016; v1 submitted 9 July, 2016;
originally announced July 2016.
-
Outdoor Field Experience with Autonomous RPC Based Stations
Authors:
L. Lopes,
P. Assis,
A. Blanco,
N. Carolino,
M. A. Cerda,
R. Conceição,
O. Cunha,
M. Ferreira,
P. Fonte,
R. Luz,
L. Mendes,
A. Pereira,
M. Pimenta,
R. Sarmento,
B. Tomé
Abstract:
In the last two decades Resistive Plate Chambers were employed in the Cosmic Ray Experiments COVER-PLASTEX and ARGO/YBJ. In both experiments the detectors were housed indoors, likely owing to gas distribution requirements and the need to control environment variables that directly affect RPCs operational stability. But in experiments where Extended Air Shower (EAS) sampling is necessary, large are…
▽ More
In the last two decades Resistive Plate Chambers were employed in the Cosmic Ray Experiments COVER-PLASTEX and ARGO/YBJ. In both experiments the detectors were housed indoors, likely owing to gas distribution requirements and the need to control environment variables that directly affect RPCs operational stability. But in experiments where Extended Air Shower (EAS) sampling is necessary, large area arrays composed by dispersed stations are deployed, rendering this kind of approach impossible. In this situation, it would be mandatory to have detectors that could be deployed in small standalone stations, with very rare opportunities for maintenance, and with good resilience to environmental conditions. Aiming to meet these requirements, we started some years ago the development of RPCs for Autonomous Stations. The results from indoor tests and measurements were very promising, both concerning performance and stability under very low gas flow rate, which is the main requirement for Autonomous Stations. In this work we update the indoor results and show the first ones concerning outdoor stable operation. In particular, a dynamic adjustment of the high voltage is applied to keep gas gain constant.
△ Less
Submitted 30 August, 2016; v1 submitted 10 June, 2016;
originally announced June 2016.
-
An objective perspective for classic flow classification criteria
Authors:
Ramon S. Martins,
Anselmo S. Pereira,
Gilmar Mompean,
Laurent Thais,
Roney L. Thompson
Abstract:
Four classic criteria used to the classification of complex flows are discussed here. These criteria are useful to identify regions of the flow related to shear, elongation or rigid-body motion. These usual criteria, namely $Q$, $Δ$, $λ_{2}$ and $λ_{cr}/λ_{ci}$, use the fluid's rate-of-rotation tensor, which is known to vary with respect to a reference frame. The advantages of using objective (inv…
▽ More
Four classic criteria used to the classification of complex flows are discussed here. These criteria are useful to identify regions of the flow related to shear, elongation or rigid-body motion. These usual criteria, namely $Q$, $Δ$, $λ_{2}$ and $λ_{cr}/λ_{ci}$, use the fluid's rate-of-rotation tensor, which is known to vary with respect to a reference frame. The advantages of using objective (invariant with respect to a general transformation on the reference frame) criteria are discussed in the present work. In this connection, we construct versions of classic criteria replacing standard vorticity, a non-objective quantity, by effective vorticity, a rate of rotation tensor with respect to the angular velocity of the eigenvectors of the strain rate tensor. The classic criteria and their corresponding objective versions are applied to classify two complex flows: the transient ABC flow and the flow through the abrupt 4:1 contraction. It is shown that the objective versions of the criteria provide richer information on the kinematics of the flow
△ Less
Submitted 20 October, 2015; v1 submitted 10 June, 2015;
originally announced June 2015.
-
Investigation of Hamamatsu H8500 phototubes as single photon detectors
Authors:
M. Hoek,
V. Lucherini,
M. Mirazita,
R. A. Montgomery,
A. Orlandi,
S. Anefalos Pereira,
S. Pisano,
P. Rossi,
A. Viticchiè,
A. Witchger
Abstract:
We have investigated the response of a significant sample of Hamamatsu H8500 MultiAnode PhotoMultiplier Tubes (MAPMTs) as single photon detectors, in view of their use in a ring imaging Cherenkov counter for the CLAS12 spectrometer at the Thomas Jefferson National Accelerator Facility. For this, a laser working at 407.2nm wavelength was employed. The sample is divided equally into standard window…
▽ More
We have investigated the response of a significant sample of Hamamatsu H8500 MultiAnode PhotoMultiplier Tubes (MAPMTs) as single photon detectors, in view of their use in a ring imaging Cherenkov counter for the CLAS12 spectrometer at the Thomas Jefferson National Accelerator Facility. For this, a laser working at 407.2nm wavelength was employed. The sample is divided equally into standard window type, with a spectral response in the visible light region, and UV-enhanced window type MAPMTs. The studies confirm the suitability of these MAPMTs for single photon detection in such a Cherenkov imaging application.
△ Less
Submitted 24 March, 2015; v1 submitted 9 September, 2014;
originally announced September 2014.
-
Dark matter search in a Beam-Dump eXperiment (BDX) at Jefferson Lab
Authors:
BDX Collaboration,
M. Battaglieri,
A. Celentano,
R. De Vita,
E. Izaguirre,
G. Krnjaic,
E. Smith,
S. Stepanyan,
A. Bersani,
E. Fanchini,
S. Fegan,
P. Musico,
M. Osipenko,
M. Ripani,
E. Santopinto,
M. Taiuti,
P. Schuster,
N. Toro,
M. Dalton,
A. Freyberger,
F. -X. Girod,
V. Kubarovsky,
M. Ungaro,
G. De Cataldo,
R. De Leo
, et al. (61 additional authors not shown)
Abstract:
MeV-GeV dark matter (DM) is theoretically well motivated but remarkably unexplored. This Letter of Intent presents the MeV-GeV DM discovery potential for a 1 m$^3$ segmented plastic scintillator detector placed downstream of the beam-dump at one of the high intensity JLab experimental Halls, receiving up to 10$^{22}$ electrons-on-target (EOT) in a one-year period. This experiment (Beam-Dump eXperi…
▽ More
MeV-GeV dark matter (DM) is theoretically well motivated but remarkably unexplored. This Letter of Intent presents the MeV-GeV DM discovery potential for a 1 m$^3$ segmented plastic scintillator detector placed downstream of the beam-dump at one of the high intensity JLab experimental Halls, receiving up to 10$^{22}$ electrons-on-target (EOT) in a one-year period. This experiment (Beam-Dump eXperiment or BDX) is sensitive to DM-nucleon elastic scattering at the level of a thousand counts per year, with very low threshold recoil energies ($\sim$1 MeV), and limited only by reducible cosmogenic backgrounds. Sensitivity to DM-electron elastic scattering and/or inelastic DM would be below 10 counts per year after requiring all electromagnetic showers in the detector to exceed a few-hundred MeV, which dramatically reduces or altogether eliminates all backgrounds. Detailed Monte Carlo simulations are in progress to finalize the detector design and experimental set up. An existing 0.036 m$^3$ prototype based on the same technology will be used to validate simulations with background rate estimates, driving the necessary R$\&$D towards an optimized detector. The final detector design and experimental set up will be presented in a full proposal to be submitted to the next JLab PAC. A fully realized experiment would be sensitive to large regions of DM parameter space, exceeding the discovery potential of existing and planned experiments by two orders of magnitude in the MeV-GeV DM mass range.
△ Less
Submitted 11 June, 2014;
originally announced June 2014.
-
Down Converter Device Combining Rare-Earth Doped Thin Layer and Photonic Crystal for c-Si Based Solar Cell
Authors:
Thierry Deschamps,
Emmanuel Drouard,
Romain Peretti,
Loïc Lalouat,
Erwann Fourmond,
Alain Fave,
Antoine Guille,
António Pereira,
Bernard Moine,
Christian Seassal
Abstract:
The aim of the study is to develop ultra-compact structures enabling an efficient conversion of single high energy photon (UV) to two lower energy photons (IR). The proposed structure combines rare-earths doped thin layer allowing the down-conversion process with a photonic crystal (PhC), in order to control and enhance the down-conversion using optical resonances. On the top of the rare-earths do…
▽ More
The aim of the study is to develop ultra-compact structures enabling an efficient conversion of single high energy photon (UV) to two lower energy photons (IR). The proposed structure combines rare-earths doped thin layer allowing the down-conversion process with a photonic crystal (PhC), in order to control and enhance the down-conversion using optical resonances. On the top of the rare-earths doped layer, a silicon nitride (SiN) 2D planar PhC is synthesized. For that, SiN is first deposited by PECVD. After holographic lithography and reactive ion etching, a periodic square lattice of holes is generated on the SiN layer. The PhC topographical parameters as well as the layers thickness are optimized using Finite-Difference-Time-Domain simulations. The design and realization of such PhC-assisted down-converter structures is presented. Optical simulations demonstrate that the PhC leads to the establishment of resonant modes located in the underneath doped layer, allowing a drastic enhancement of the absorption of the rare-earth ions without disturbing the transmission in the visible and near-IR parts of the spectrum, hence demonstrating the relevance of such an approach.
△ Less
Submitted 25 November, 2013;
originally announced November 2013.
-
What do I make of your Latinorum? Sensitivity auditing of mathematical modelling
Authors:
Andrea Saltelli,
Ângela Guimarães Pereira,
Jeroen P. van der Sluijs,
Silvio Funtowicz
Abstract:
In their book Uncertainty and Quality of Science for Policy (1990), Funtowicz and Ravetz argued the need to extend traditional methods and techniques of quality assurance in policy-related science. Since then, these ideas have been operationalized further and applied. Particularly relevant have been the recourse to extended peer review, to be intended as internal, across disciplines, as well as ex…
▽ More
In their book Uncertainty and Quality of Science for Policy (1990), Funtowicz and Ravetz argued the need to extend traditional methods and techniques of quality assurance in policy-related science. Since then, these ideas have been operationalized further and applied. Particularly relevant have been the recourse to extended peer review, to be intended as internal, across disciplines, as well as external, between practitioners and stakeholders, and the use of a new approach to qualify quantities: NUSAP (Numeral, Unit, Spread, Assessment, Pedigree). Here we describe how sensitivity analysis, mandated by existing guidelines as a good practice to use in conjunction to mathematical modelling, needs to be transformed and adapted to ensure quality in the treatment of uncertainty of science for policy. We thus provide seven rules to extend the use of sensitivity analysis (or how to apportion uncertainty in model based inference among input factors) in a process of sensitivity auditing of models used in a policy context. Each rule will be illustrated by examples.
△ Less
Submitted 4 November, 2012;
originally announced November 2012.
-
Interfacial confinement in core-shell nanowires due to high dielectric mismatch
Authors:
A. A. Sousa,
T. A. S. Pereira,
A. Chaves,
J. S. de Sousa,
G. A. Farias
Abstract:
We theoretically investigate the role of the dielectric mismatch between materials on the energy levels and recombination energies of a core-shell nanowire. Our results demonstrate that when the dielectric constant of the core material is lower than that of the shell material, the self-image potential pushes the charge carriers towards the core-shell interface, in such a way that the ideal confine…
▽ More
We theoretically investigate the role of the dielectric mismatch between materials on the energy levels and recombination energies of a core-shell nanowire. Our results demonstrate that when the dielectric constant of the core material is lower than that of the shell material, the self-image potential pushes the charge carriers towards the core-shell interface, in such a way that the ideal confinement model is no longer suitable. The effects of this interfacial confinement on the electronic properties of such wires, as well as on its response to applied magnetic fields, are discussed.
△ Less
Submitted 12 September, 2012;
originally announced September 2012.
-
A simple setup for neutron tomography at the Portuguese Nuclear Research Reactor
Authors:
M. A. Stanojev Pereira,
J. G. Marques,
R. Pugliesi
Abstract:
A simple setup for neutron radiography and tomography was recently installed at the Portuguese Research Reactor. The objective of this work was to determine the operational characteristics of the installed setup, namely the irradiation time to obtain the best dynamic range for individual images and the spatial resolution. The performance of the equipment was demonstrated by imaging a fragment of a…
▽ More
A simple setup for neutron radiography and tomography was recently installed at the Portuguese Research Reactor. The objective of this work was to determine the operational characteristics of the installed setup, namely the irradiation time to obtain the best dynamic range for individual images and the spatial resolution. The performance of the equipment was demonstrated by imaging a fragment of a 17th century decorative tile.
△ Less
Submitted 15 May, 2012;
originally announced May 2012.
-
Can a falling ball lose speed?
Authors:
Paulo Murilo Castro de Oliveira,
Suzana Moss de Oliveira,
Felipe Augusto Pereira,
José Carlos Sartorelli
Abstract:
A small and light polystyrene ball is released without initial speed from a certain height above the floor. Then, it falls on air. The main responsible for the friction force against the movement is the wake of successive air vortices which form behind (above) the falling ball, a turbulent phenomenon. After the wake appears, the friction force compensates the Earth gravitational attraction and the…
▽ More
A small and light polystyrene ball is released without initial speed from a certain height above the floor. Then, it falls on air. The main responsible for the friction force against the movement is the wake of successive air vortices which form behind (above) the falling ball, a turbulent phenomenon. After the wake appears, the friction force compensates the Earth gravitational attraction and the ball speed stabilises in a certain limiting value Vl. Before the formation of the turbulent wake, however, the friction force is not strong enough, allowing the initially growing speed to surpass the future final value Vl. Only after the wake finally becomes long enough, the ball speed decreases and reaches the proper Vl.
△ Less
Submitted 21 May, 2010;
originally announced May 2010.
-
Equilibrium gas-liquid-solid contact angle from density-functional theory
Authors:
Antonio Pereira,
Serafim Kalliadasis
Abstract:
We investigate the equilibrium of a fluid in contact with a solid boundary through a density-functional theory. Depending on the conditions, the fluid can be in one phase, gas or liquid, or two phases, while the wall induces an external field acting on the fluid particles. We first examine the case of a liquid film in contact with the wall. We construct bifurcation diagrams for the film thickness…
▽ More
We investigate the equilibrium of a fluid in contact with a solid boundary through a density-functional theory. Depending on the conditions, the fluid can be in one phase, gas or liquid, or two phases, while the wall induces an external field acting on the fluid particles. We first examine the case of a liquid film in contact with the wall. We construct bifurcation diagrams for the film thickness as a function of the chemical potential. At a specific value of the chemical potential, two equally stable films, a thin one and a thick one, can coexist. As saturation is approached, the thickness of the thick film tends to infinity. This allows the construction of a liquid-gas interface that forms a well defined contact angle with the wall.
△ Less
Submitted 11 March, 2010;
originally announced March 2010.
-
A model of the reflection distribution in the vacuum ultra violet region
Authors:
C. Silva,
J. Pinto da Cunha,
A. Pereira,
M. I. Lopes,
V. Chepel,
V. Solovov,
F. Neves
Abstract:
A reflection model with three components, a specular spike, a specular lobe and a diffuse lobe is discussed. This model was successfully applied to describe reflection of xenon scintillation light (175 nm) by PTFE and other fluoropolymers and can be used for Monte Carlo simulation and analysis of scintillation detectors. The measured data favors a Trowbridge-Reitz distribution function of ellips…
▽ More
A reflection model with three components, a specular spike, a specular lobe and a diffuse lobe is discussed. This model was successfully applied to describe reflection of xenon scintillation light (175 nm) by PTFE and other fluoropolymers and can be used for Monte Carlo simulation and analysis of scintillation detectors. The measured data favors a Trowbridge-Reitz distribution function of ellipsoidal micro-surfaces. The intensity of the coherent reflection increases with increasing angle of incidence, as expected, since the surface appears smoother at grazing angles. The total reflectance obtained for PTFE is about 70% for VUV light at normal incidence in vacuum and estimated to be up to 100% in contact with liquid xenon.
△ Less
Submitted 6 October, 2009;
originally announced October 2009.
-
Reflectance of Polytetrafluoroethylene (PTFE) for Xenon Scintillation Light
Authors:
C. Silva,
J. Pinto da Cunha,
A. Pereira,
V. Chepel,
M. I. Lopes,
V. Solovov
Abstract:
Gaseous and liquid xenon particle detectors are being used in a number of applications including dark matter search and neutrino-less double beta decay experiments. Polytetrafluoroethylene (PTFE) is often used in these detectors both as electrical insulator and as a light reflector to improve the efficiency of detection of scintillation photons. However, xenon emits in the vacuum ultraviolet wav…
▽ More
Gaseous and liquid xenon particle detectors are being used in a number of applications including dark matter search and neutrino-less double beta decay experiments. Polytetrafluoroethylene (PTFE) is often used in these detectors both as electrical insulator and as a light reflector to improve the efficiency of detection of scintillation photons. However, xenon emits in the vacuum ultraviolet wavelength region (175 nm) where the reflecting properties of PTFE are not sufficiently known.
In this work we report on measurements of PTFE reflectance, including its angular distribution, for the xenon scintillation light. Various samples of PTFE, manufactured by different processes (extruded, expanded, skived and pressed) have been studied. The data were interpreted with a physical model comprising both specular and diffuse reflections. The reflectance obtained for these samples ranges from about 47% to 66% for VUV light. Fluoropolymers, namely ETFE, FEP and PFA were also measured.
△ Less
Submitted 6 October, 2009;
originally announced October 2009.
-
Scattering of charge carriers in graphene induced by topological defects
Authors:
J. M. Fonseca,
W. A. Moura-Melo,
A. R. Pereira
Abstract:
We study the scattering of graphene quasiparticles by topological defects, represented by holes, pentagons and heptagons. For holes, we found that at low concentration they give a negligible contribution to the resistivity. Whenever pentagons or heptagons are introduced we realize that a fermionic current is scattered by defects.
We study the scattering of graphene quasiparticles by topological defects, represented by holes, pentagons and heptagons. For holes, we found that at low concentration they give a negligible contribution to the resistivity. Whenever pentagons or heptagons are introduced we realize that a fermionic current is scattered by defects.
△ Less
Submitted 4 August, 2011; v1 submitted 20 August, 2009;
originally announced August 2009.