-
Iterative assembly of $^{171}$Yb atom arrays with cavity-enhanced optical lattices
Authors:
M. A. Norcia,
H. Kim,
W. B. Cairncross,
M. Stone,
A. Ryou,
M. Jaffe,
M. O. Brown,
K. Barnes,
P. Battaglino,
T. C. Bohdanowicz,
A. Brown,
K. Cassella,
C. -A. Chen,
R. Coxe,
D. Crow,
J. Epstein,
C. Griger,
E. Halperin,
F. Hummel,
A. M. W. Jones,
J. M. Kindem,
J. King,
K. Kotru,
J. Lauigan,
M. Li
, et al. (25 additional authors not shown)
Abstract:
Assembling and maintaining large arrays of individually addressable atoms is a key requirement for continued scaling of neutral-atom-based quantum computers and simulators. In this work, we demonstrate a new paradigm for assembly of atomic arrays, based on a synergistic combination of optical tweezers and cavity-enhanced optical lattices, and the incremental filling of a target array from a repeti…
▽ More
Assembling and maintaining large arrays of individually addressable atoms is a key requirement for continued scaling of neutral-atom-based quantum computers and simulators. In this work, we demonstrate a new paradigm for assembly of atomic arrays, based on a synergistic combination of optical tweezers and cavity-enhanced optical lattices, and the incremental filling of a target array from a repetitively filled reservoir. In this protocol, the tweezers provide microscopic rearrangement of atoms, while the cavity-enhanced lattices enable the creation of large numbers of optical traps with sufficient depth for rapid low-loss imaging of atoms. We apply this protocol to demonstrate near-deterministic filling (99% per-site occupancy) of 1225-site arrays of optical traps. Because the reservoir is repeatedly filled with fresh atoms, the array can be maintained in a filled state indefinitely. We anticipate that this protocol will be compatible with mid-circuit reloading of atoms into a quantum processor, which will be a key capability for running large-scale error-corrected quantum computations whose durations exceed the lifetime of a single atom in the system.
△ Less
Submitted 18 June, 2024; v1 submitted 29 January, 2024;
originally announced January 2024.
-
Precision test of the weak interaction with slow muons
Authors:
Xin Chen,
Zhen Hu,
Hui Li,
Shaogang Peng,
Yongcheng Wu
Abstract:
We propose to use slow muons facilities combined with cyclotron radiation detection for precision test of the weak interaction in the muon decays. Slow positive muon bunches are first injected into a cylindrical superconducting vacuum chamber with uniform strong axial magnetic fields to radially confine the muons. The positrons resulting from muon decays can be detected by their cyclotron radiatio…
▽ More
We propose to use slow muons facilities combined with cyclotron radiation detection for precision test of the weak interaction in the muon decays. Slow positive muon bunches are first injected into a cylindrical superconducting vacuum chamber with uniform strong axial magnetic fields to radially confine the muons. The positrons resulting from muon decays can be detected by their cyclotron radiation, which can be transported to low-noise electronic devices through waveguides coupled to the chamber. The decay positron's energy can be precisely measured down to eV level in the low energy region, which is sensitive to new physics effects such as Majorana neutrinos and new structures of weak interactions.
△ Less
Submitted 11 January, 2024;
originally announced January 2024.
-
Scale invariance of a spherical unitary Fermi gas
Authors:
Lu Wang,
Xiangchuan Yan,
**g Min,
Dali Sun,
Xin Xie,
Shi-Guo Peng,
Mingsheng Zhan,
Kaijun Jiang
Abstract:
A unitary Fermi gas in an isotropic harmonic trap is predicted to show scale and conformal symmetry that have important consequences in its thermodynamic and dynamical properties. By experimentally realizing a unitary Fermi gas in an isotropic harmonic trap, we demonstrate its universal expansion dynamics along each direction and at different temperatures. We show that as a consequence of SO(2,1)…
▽ More
A unitary Fermi gas in an isotropic harmonic trap is predicted to show scale and conformal symmetry that have important consequences in its thermodynamic and dynamical properties. By experimentally realizing a unitary Fermi gas in an isotropic harmonic trap, we demonstrate its universal expansion dynamics along each direction and at different temperatures. We show that as a consequence of SO(2,1) symmetry, the measured release energy is equal to that of the trap** energy. We further observe the breathing mode with an oscillation frequency twice the trap** frequency and a small dam** rate, providing the evidence of SO(2,1) symmetry. In addition, away from resonance when scale invariance is broken, we determine the effective exponent $γ$ that relates the chemical potential and average density along the BEC-BCS crossover, which qualitatively agrees with the mean field predictions. This work opens the possibility of studying non-equilibrium dynamics in a conformal invariant system in the future.
△ Less
Submitted 19 June, 2024; v1 submitted 27 November, 2023;
originally announced November 2023.
-
SOT-MRAM-Enabled Probabilistic Binary Neural Networks for Noise-Tolerant and Fast Training
Authors:
Puyang Huang,
Yu Gu,
Chenyi Fu,
Jiaqi Lu,
Yiyao Zhu,
Renhe Chen,
Yongqi Hu,
Yi Ding,
Hongchao Zhang,
Shiyang Lu,
Shouzhong Peng,
Weisheng Zhao,
Xufeng Kou
Abstract:
We report the use of spin-orbit torque (SOT) magnetoresistive random-access memory (MRAM) to implement a probabilistic binary neural network (PBNN) for resource-saving applications. The in-plane magnetized SOT (i-SOT) MRAM not only enables field-free magnetization switching with high endurance (> 10^11), but also hosts multiple stable probabilistic states with a low device-to-device variation (< 6…
▽ More
We report the use of spin-orbit torque (SOT) magnetoresistive random-access memory (MRAM) to implement a probabilistic binary neural network (PBNN) for resource-saving applications. The in-plane magnetized SOT (i-SOT) MRAM not only enables field-free magnetization switching with high endurance (> 10^11), but also hosts multiple stable probabilistic states with a low device-to-device variation (< 6.35%). Accordingly, the proposed PBNN outperforms other neural networks by achieving an 18* increase in training speed, while maintaining an accuracy above 97% under the write and read noise perturbations. Furthermore, by applying the binarization process with an additional SOT-MRAM dummy module, we demonstrate an on-chip MNIST inference performance close to the ideal baseline using our SOT-PBNN hardware.
△ Less
Submitted 20 September, 2023; v1 submitted 14 September, 2023;
originally announced September 2023.
-
Flexible but Refractory Single-Crystalline Hyperbolic Metamaterials
Authors:
Ruyi Zhang,
Ting Lin,
Shaoqin Peng,
Jiachang Bi,
Shunda Zhang,
Guanhua Su,
Jie Sun,
Junhua Gao,
Hongtao Cao,
Qinghua Zhang,
Lin Gu,
Yanwei Cao
Abstract:
The fabrication of flexible single-crystalline plasmonic or photonic components in a scalable way is fundamentally important to flexible electronic and photonic devices with high speed, high energy efficiency, and high reliability. However, it remains to be a big challenge so far. Here, we have successfully synthesized flexible single-crystalline optical hyperbolic metamaterials by directly deposi…
▽ More
The fabrication of flexible single-crystalline plasmonic or photonic components in a scalable way is fundamentally important to flexible electronic and photonic devices with high speed, high energy efficiency, and high reliability. However, it remains to be a big challenge so far. Here, we have successfully synthesized flexible single-crystalline optical hyperbolic metamaterials by directly depositing refractory nitride superlattices on flexible fluoro phlogopite-mica substrates with magnetron sputtering. Interestingly, these flexible hyperbolic metamaterials show dual-band hyperbolic dispersion of dielectric constants with low dielectric losses and high figure-of-merit in the visible to near-infrared ranges. More importantly, the optical properties of these nitride-based flexible hyperbolic metamaterials show remarkable stability under either heating or bending. Therefore, the strategy developed in this work offers an easy and scalable route to fabricate flexible, high-performance, and refractory plasmonic or photonic components, which can significantly expand the applications of current electronic and photonic devices.
△ Less
Submitted 26 April, 2023;
originally announced April 2023.
-
A fluid flow model for the pressure loss through perforated plates
Authors:
Shuai Li,
Lars Davidson,
Shia-Hui Peng
Abstract:
A fluid flow through a perforated plate is a common problem in a wide variety of practical applications in thermal, mechanical, chemical, civil, nuclear, ocean and aerospace engineering. In this paper, we proposed a novel fluid flow model for the pressure loss through plates with circular perforations in both laminar and turbulent flows. The design of this model is based on the recent measurements…
▽ More
A fluid flow through a perforated plate is a common problem in a wide variety of practical applications in thermal, mechanical, chemical, civil, nuclear, ocean and aerospace engineering. In this paper, we proposed a novel fluid flow model for the pressure loss through plates with circular perforations in both laminar and turbulent flows. The design of this model is based on the recent measurements conducted at ONERA in the framework of the on-going European Union H2020 INVENTOR project, as well as an existing model for laminar flows. The new model is then validated against existing numerical simulations in the laminar regime and experiments in the turbulent regime. Overall, the predictions given by the new model agree well with the numerical simulations and experiments, and are superior to other models in the literature. This is significant, considering that the present model is much simpler than these previous models. To demonstrate the application of the new model in numerical simulations, two-dimensional channel flows are simulated using Reynolds-averaged Navier-Stokes (RANS) equations with the new model as a pressure-drop source term added to the momentum equations. Results show that the RANS predictions agree very well with the present model predictions.
△ Less
Submitted 23 April, 2023;
originally announced April 2023.
-
Vertical-slice ocean tomography with seismic waves
Authors:
Jörn Callies,
Wenbo Wu,
Shirui Peng,
Zhongwen Zhan
Abstract:
Seismically generated sound waves that propagate through the ocean are used to infer temperature anomalies and their vertical structure in the deep East Indian Ocean. These T waves are generated by earthquakes off Sumatra and received by hydrophone stations off Diego Garcia and Cape Leeuwin. Between repeating earthquakes, a T wave's travel time changes in response to temperature anomalies along th…
▽ More
Seismically generated sound waves that propagate through the ocean are used to infer temperature anomalies and their vertical structure in the deep East Indian Ocean. These T waves are generated by earthquakes off Sumatra and received by hydrophone stations off Diego Garcia and Cape Leeuwin. Between repeating earthquakes, a T wave's travel time changes in response to temperature anomalies along the wave's path. What part of the water column the travel time is sensitive to depends on the frequency of the wave, so measuring travel time changes at a few low frequencies constrains the vertical structure of the inferred temperature anomalies. These measurements reveal anomalies due to equatorial waves, mesoscale eddies, and decadal warming trends. By providing direct constraints on basin-scale averages with dense sampling in time, these data complement previous point measurements that alias local and transient temperature anomalies.
△ Less
Submitted 5 April, 2023;
originally announced April 2023.
-
Validating and optimising mismatch tolerance of Doppler backscattering measurements with the beam model
Authors:
Valerian H. Hall-Chen,
Julius Damba,
Felix I. Parra,
Quinn T. Pratt,
Clive A. Michael,
Shi Peng,
Terry L. Rhodes,
Neal A. Crocker,
Jon C. Hillesheim,
Rongjie Hong,
Shikang Ni,
William A. Peebles,
Ching Eng Png,
Juan Ruiz Ruiz
Abstract:
We use the beam model of Doppler backscattering (DBS), which was previously derived from beam tracing and the reciprocity theorem, to shed light on mismatch attenuation. This attenuation of the backscattered signal occurs when the wavevector of the probe beam's electric field is not in the plane perpendicular to the magnetic field. Correcting for this effect is important for determining the amplit…
▽ More
We use the beam model of Doppler backscattering (DBS), which was previously derived from beam tracing and the reciprocity theorem, to shed light on mismatch attenuation. This attenuation of the backscattered signal occurs when the wavevector of the probe beam's electric field is not in the plane perpendicular to the magnetic field. Correcting for this effect is important for determining the amplitude of the actual density fluctuations. Previous preliminary comparisons between the model and Mega-Ampere Spherical Tokamak (MAST) plasmas were promising. In this work, we quantitatively account for this effect on DIII-D, a conventional tokamak. We compare the predicted and measured mismatch attenuation in various DIII-D, MAST, and MAST-U plasmas, showing that the beam model is applicable in a wide variety of situations. Finally, we performed a preliminary parameter sweep and found that the mismatch tolerance can be improved by optimising the probe beam's width and curvature at launch. This is potentially a design consideration for new DBS systems.
△ Less
Submitted 30 September, 2022;
originally announced September 2022.
-
Comparison of three numerical stabilization techniques of viscoelastic flows: vortex shedding behind a confined cylinder
Authors:
Sai Peng,
Peng Yu
Abstract:
In this study, the OpenFOAM platform, based on the finite volume method, is applied to investigate the two-dimensional viscoelastic flow past a circular cylinder. The FENE-P model, which considers the bounded elongation of polymer molecules, is chosen to describe the elastic constitutive relationship of the polymer solution. The maximum molecular chain lengths of L = 10, 50, 100, and 200 are consi…
▽ More
In this study, the OpenFOAM platform, based on the finite volume method, is applied to investigate the two-dimensional viscoelastic flow past a circular cylinder. The FENE-P model, which considers the bounded elongation of polymer molecules, is chosen to describe the elastic constitutive relationship of the polymer solution. The maximum molecular chain lengths of L = 10, 50, 100, and 200 are considered, which describe the molecular conformation characteristics of the polymer solution. To improve the numerical instability of the viscoelastic flow simulation, three different methods, i.e., the traditional method (Td) with the addition of artificial viscosity, the logarithmic reconstruction method (Log), and the square root tensor method (Sqrt), are evaluated. The results show that the artificial viscosity has a little effect on the accuracy for the simulation with a small molecular chain length (L = 10). However, for long molecular chain lengths such as L = 100 and L = 200, the addition of artificial dissipation tends to overestimate the drag, which indicates that special caution is needed to incorporate the artificial dissipation in the simulation. Moreover, the logarithmic reconstruction method shows a strong grid-dependent characteristics, which may produce unphysical results.
△ Less
Submitted 10 August, 2022;
originally announced August 2022.
-
Subcritical insability of viscoelastic flow over a circular cylinder: A numerical study
Authors:
Sai Peng,
Jia-yu Li,
Xin-hui Si,
Xiao-yang Xu,
Peng Yu
Abstract:
In this paper, we discuss whether the instability of viscoelastic flow around a circular cylinder is subcritical or supercritical by numerical simulation. The Oldroyd-B model is selected to describe the viscoelastic constitutive relationship. The Log-conformation reformulation is employed to stabilize numerical simulation. The parameter ranges investigated are the Reynolds numbers ($Re$) spanning…
▽ More
In this paper, we discuss whether the instability of viscoelastic flow around a circular cylinder is subcritical or supercritical by numerical simulation. The Oldroyd-B model is selected to describe the viscoelastic constitutive relationship. The Log-conformation reformulation is employed to stabilize numerical simulation. The parameter ranges investigated are the Reynolds numbers ($Re$) spanning from 5 to 100 and the Weissenberg number ($Wi$) spanning from 0 to 10, with a fixed viscosity ratio of $β= 0.9$. Simulations are performed under two paths, i.e., 1) increasing $Re$ (or $Wi$) and 2) decreasing $Re$ (or $Wi$) slowly and gradually from one state to the next. The results show that the statistical solutions such as the time-averaged velocity obtained along the two paths are not identical over certain parameter range, which is around the transition point from the steady to unsteady flow. This loading path dependence behaviour indicates that the flow instability is subcritical.
△ Less
Submitted 31 July, 2022;
originally announced August 2022.
-
Extension of the bright high-harmonic photon energy range via nonadiabatic critical phase matching
Authors:
Zongyuan Fu,
Yudong Chen,
Sainan Peng,
Bingbing Zhu,
Baochang Li,
Rodrigo Martín-Hernández,
Guangyu Fan,
Yihua Wang,
Carlos Hernández-García,
Cheng **,
Margaret Murnane,
Henry Kapteyn,
Zhensheng Tao
Abstract:
Extending the photon energy range of bright high-harmonic generation to cover the entire soft X-ray region is important for many applications in science and technology. The concept of critical ionization fraction has been essential, because it dictates the maximum driving laser intensity that can be used while preserving bright harmonic emission. In this work, we reveal a second, nonadiabatic crit…
▽ More
Extending the photon energy range of bright high-harmonic generation to cover the entire soft X-ray region is important for many applications in science and technology. The concept of critical ionization fraction has been essential, because it dictates the maximum driving laser intensity that can be used while preserving bright harmonic emission. In this work, we reveal a second, nonadiabatic critical ionization fraction that substantially extends the maximum phase-matched high-harmonic photon energy, that arises due to strong resha** of the intense driving laser field. We validate this understanding through a systematic comparison between experiment and theory, for a wide range of pulse durations and driving laser wavelengths. In particular, high harmonics driven by intense few-cycle pulses experience the most pronounced spectral resha**, significantly extending the bright photon energy range. We also present an analytical model that predicts the spectral extension that can be achieved for different driving lasers. This reveals an increasing role of nonadiabatic critical phase matching when driven by few-cycle mid-infrared lasers. These findings are important for the development of high-brightness soft X-ray sources for applications in spectroscopy and imaging.
△ Less
Submitted 14 June, 2022;
originally announced June 2022.
-
Effect of wall slip on laminar flow past a circular cylinder
Authors:
Yan-cheng Li,
Sai Peng,
Taiba Kouser
Abstract:
A numerical study of two-dimensional flow past a confined circular cylinder with slip wall is performed. A dimensionless number, Knudsen number ($Kn$) is used to describe the slip length of cylinder wall. The Reynolds number ($Re$) and Knudsen number ($Kn$) ranges considered are $Re = [1, 180]$ and $Kn = [0, \infty)$, respectively. Time-averaged flow separation angle ($\bar{θ_s}$), dimensionless r…
▽ More
A numerical study of two-dimensional flow past a confined circular cylinder with slip wall is performed. A dimensionless number, Knudsen number ($Kn$) is used to describe the slip length of cylinder wall. The Reynolds number ($Re$) and Knudsen number ($Kn$) ranges considered are $Re = [1, 180]$ and $Kn = [0, \infty)$, respectively. Time-averaged flow separation angle ($\bar{θ_s}$), dimensionless recirculation length ($\bar{L_s}$) and the tangential velocity ($\bar{u_τ}$) distributed on the cylinder's wall, drag coefficient ($\bar{C_d}$) and drag reduction ($DR$) are investigated. The time-averaged tangential velocity distribution on the cylinder's wall fit well with the formula $\bar{u_τ} = [\fracα{1+βe^{-γ(π-θ)}}+δ]sin(θ) $, where the coefficients ($α$, $β$, $γ$, $δ$) are related with $Re$ and $Kn$. Several scaling-laws are found, $log(\bar{u_{τmax}})\sim{log(Re)}$ and $\bar{u_{τmax}}\sim{Kn}$ for low $Kn$, ($\bar{u_{τmax}}$ is the maximum tangential velocity on the cylinder's wall), $log(DR)\sim{log(Re)}$ ($Re\leq45$ and $Kn\leq0.1$), $log(DR)\sim{log(Kn)}$ ($Kn\leq0.05$). At low $Re$, $DR_v$ (the friction drag reduction) is the main source of $DR$. However, $DR_p$ (the differential pressure drag reduction) contributes the most to $DR$ at high $Re$ ($Re>\sim60$) and $Kn$ over a critical number. $DR_v$ is found almost independent to $Re$.
△ Less
Submitted 13 July, 2022; v1 submitted 31 May, 2022;
originally announced May 2022.
-
Wall-induced translation of a rotating particle in viscoelastic fluid
Authors:
Sai Peng,
Peng Yu
Abstract:
Shear-thinning and viscoelasticity are two non-Newtonian fluid properties widely existing in biological fluids. In this study, we found that the translation motion of a rotating particle near a wall speed up firstly, and then slows down with enhancement of fluid viscoelasticity, which is different from the behavior reported in shear thinning fluid (Chen et al. J. Fluid Mech. 2021, 927). Our resear…
▽ More
Shear-thinning and viscoelasticity are two non-Newtonian fluid properties widely existing in biological fluids. In this study, we found that the translation motion of a rotating particle near a wall speed up firstly, and then slows down with enhancement of fluid viscoelasticity, which is different from the behavior reported in shear thinning fluid (Chen et al. J. Fluid Mech. 2021, 927). Our research is carried out by numerical simulation of Navier-Stokes equations combined with Oldroyd-B constitutive model. This work is expected to be helpful to understand the movement of a rotating sphere near a wall in complex fluids comprehensively.
△ Less
Submitted 2 August, 2022; v1 submitted 16 May, 2022;
originally announced May 2022.
-
Simulation of flow induced vibration of a cylinder in an expansion tube
Authors:
Sai Peng,
Qiyu Deng,
Lin Zhou,
Tao Huang,
Peng Yu
Abstract:
In this study, a series of simulations are conducted to investigate the motion of a small cylinder in an expansion tube, focusing on two-dimensional dynamics. These simulations are performed on the FLUENT platform employing the Overset function. The collision between the cylinder and the tube wall is modeled as a positive rigid body collision without losing energy. Two key parameters, the dimensio…
▽ More
In this study, a series of simulations are conducted to investigate the motion of a small cylinder in an expansion tube, focusing on two-dimensional dynamics. These simulations are performed on the FLUENT platform employing the Overset function. The collision between the cylinder and the tube wall is modeled as a positive rigid body collision without losing energy. Two key parameters, the dimensionless gravity (Mg*) and the Reynolds number (Re), were explored within the ranges of 4.9-79.4 and 1-300, respectively. Two types of inflow are considered: the invariable inflow or superimposed a sinusoidal inflow of periodical fluctuation. For invariable inflow, three motion modes (drainage mode, balance mode and vibration mode) are found in the phase diagrams of (Mg*, Re). For an invariable inflow, the high-amplitude vibrations of a cylinder is proved to be widespread in the Reynolds number range from 5 to 40. Additionally, the scenario involving Re =300, Mg* =39.25 with sinusoidal periodic fluctuation incoming flow demonstrated intense vibrations of the cylinder. The behavior of the two-dimensional cylinder can be approximated as a simplified version of a three-dimensional sphere when the spherical motion is disregarded. Our research may help to understand this ancient flow problem.
△ Less
Submitted 26 March, 2024; v1 submitted 3 May, 2022;
originally announced May 2022.
-
Wake asymmetry weakening in viscoelastic fluids: Numerical discovery and mechanism exploration
Authors:
Sai Peng,
Tao Huang,
Taiba Kouser,
Xiao-ru Zhuang,
Yong-liang Xiong,
Peng Yu
Abstract:
Viscoelasticity weakens the asymmetry of laminar shedding flow behind a blunt body in a free domain. In the present study, this finding is confirmed by four unsteady viscoelastic flows with asymmetric flow configuration, i.e., flow over an inclined flat plate with various angles of incidence, flow over a rotating circular cylinder, flow over a circular cylinder with asymmetric slip boundary distri…
▽ More
Viscoelasticity weakens the asymmetry of laminar shedding flow behind a blunt body in a free domain. In the present study, this finding is confirmed by four unsteady viscoelastic flows with asymmetric flow configuration, i.e., flow over an inclined flat plate with various angles of incidence, flow over a rotating circular cylinder, flow over a circular cylinder with asymmetric slip boundary distribution, and flow over an inclined row of eight equally closely spaced circular cylinders (which can be considered as a single large blunt body) through direct numerical simulation combined with the Peterlin approximation of the finitely extensible nonlinear elastic (FENE-P) model. At high Weissenberg number, an arc shape region with high elastic stress, which is similar to shock wave, forms in the frontal area of the blunt body. This region acts as a stationary shield to separate the flow into different regions. Thus, the free stream resembles to pass this shield instead of the original blunt body. As this shield has symmetric feature, the wake flow restores symmetry.
△ Less
Submitted 8 August, 2022; v1 submitted 27 March, 2022;
originally announced March 2022.
-
Molecular state in a spin-orbital-angular-momentum coupled Fermi gas
Authors:
Yiwen Han,
Shi-Guo Peng,
Ke-Ji Chen,
Wei Yi
Abstract:
We study the two-body bound states in a spin-orbital-angular-momentum (SOAM) coupled quantum gas of fermions. Two different configurations are considered: an attractive $s$-wave interaction exists between two spin species that are SOAM coupled; and an atom with SOAM coupled internal spins interacts state-selectively with another atom. For both cases, we identify the condition for the emergence of…
▽ More
We study the two-body bound states in a spin-orbital-angular-momentum (SOAM) coupled quantum gas of fermions. Two different configurations are considered: an attractive $s$-wave interaction exists between two spin species that are SOAM coupled; and an atom with SOAM coupled internal spins interacts state-selectively with another atom. For both cases, we identify the condition for the emergence of molecular states with finite total angular momenta.These molecular states with quantized total angular momenta correspond to the SOAM-coupling-induced vortices in the corresponding Fermi superfluid. We propose to detect the molecules through Raman spectroscopy with Laguerre-Gaussian lasers. As the molecular states can form above the superfluid temperature, they offer an experimentally more accessible route toward the study of the underlying pairing mechanism under SOAM coupling.
△ Less
Submitted 21 March, 2022;
originally announced March 2022.
-
Numerical Study of Viscoelastic Upstream Instability
Authors:
Sai Peng,
Tingting Tang,
Jianhui Li,
Mengqi Zhang,
Peng Yu
Abstract:
In this work, we report numerical results on the flow instability and bifurcation of a viscoelastic fluid in the upstream region of a confined cylinder in a narrow channel. Two-dimensional direct numerical simulations based on the FENE-P model (the finite-extensible nonlinear elastic model with the Peterlin closure) are conducted with numerical stabilization techniques. Our results show that the m…
▽ More
In this work, we report numerical results on the flow instability and bifurcation of a viscoelastic fluid in the upstream region of a confined cylinder in a narrow channel. Two-dimensional direct numerical simulations based on the FENE-P model (the finite-extensible nonlinear elastic model with the Peterlin closure) are conducted with numerical stabilization techniques. Our results show that the macroscopic viscoelastic constitutive relation can capture the viscoelastic upstream instability reported in previous experiments for low-Reynolds-number flows. The numerical simulations reveal that the non-dimensional recirculation length ($L_D$) is affected by the cylinder blocking rate ($BR$), the Weissenberg number ($Wi$), the viscosity ratio ($β$), and the maximum polymer extension ($L$). Close to the onset of upstream recirculation, depending on the values of $L$ and $β$, the bifurcation can be supercritical or subcritical. $β$ has a nonlinear influence on the upstream recirculation length. This work contributes to our theoretical understanding of this new instability mechanism in viscoelastic wake flows.
△ Less
Submitted 23 October, 2022; v1 submitted 17 March, 2022;
originally announced March 2022.
-
Spatially homogeneous few-cycle compression of Yb lasers via all-solid-state free-space soliton management
Authors:
Bingbing Zhu,
Zongyuan Fu,
Yudong Chen,
Sainan Peng,
Cheng **,
Guangyu Fan,
Sheng Zhang,
Shunjia Wang,
Hao Ru,
Chuanshan Tian,
Yihua Wang,
Henry Kapteyn,
Margaret Murnane,
Zhensheng Tao
Abstract:
The high power and variable repetition rate of Yb femtosecond lasers make them very attractive for ultrafast science. However, for capturing sub-200 fs dynamics, efficient, high-fidelity, and high-stability pulse compression techniques are essential. Spectral broadening using an all-solid-state free-space geometry is particularly attractive, as it is simple, robust, and low-cost. However, spatial…
▽ More
The high power and variable repetition rate of Yb femtosecond lasers make them very attractive for ultrafast science. However, for capturing sub-200 fs dynamics, efficient, high-fidelity, and high-stability pulse compression techniques are essential. Spectral broadening using an all-solid-state free-space geometry is particularly attractive, as it is simple, robust, and low-cost. However, spatial and temporal losses caused by spatio-spectral inhomogeneities have been a major challenge to date, due to coupled space-time dynamics associated with unguided nonlinear propagation. In this work, we use all-solid-state free-space compressors to demonstrate compression of 170 fs pulses at a wavelength of 1030nm from a Yb:KGW laser to ~9.2 fs, with a highly spatially homogeneous mode. This is achieved by ensuring that the nonlinear beam propagation in periodic layered Kerr media occurs in soliton modes and confining the nonlinear phase through each material layer to less than 1.0 rad. A remarkable spatio-spectral homogeneity of ~0.87 can be realized, which yields a high efficiency of >50% for few-cycle compression. The universality of the method is demonstrated by implementing high-quality pulse compression under a wide range of laser conditions. The high spatiotemporal quality and the exceptional stability of the compressed pulses are further verified by high-harmonic generation. This work represents the highest efficiency and the best spatio-spectral quality ever achieved by an all-solid-state free-space pulse compressor for few-cycle-pulse generation.
△ Less
Submitted 24 August, 2021;
originally announced August 2021.
-
Assembly and coherent control of a register of nuclear spin qubits
Authors:
Katrina Barnes,
Peter Battaglino,
Benjamin J. Bloom,
Kayleigh Cassella,
Robin Coxe,
Nicole Crisosto,
Jonathan P. King,
Stanimir S. Kondov,
Krish Kotru,
Stuart C. Larsen,
Joseph Lauigan,
Brian J. Lester,
Mickey McDonald,
Eli Megidish,
Sandeep Narayanaswami,
Ciro Nishiguchi,
Remy Notermans,
Lucas S. Peng,
Albert Ryou,
Tsung-Yao Wu,
Michael Yarwood
Abstract:
We introduce an optical tweezer platform for assembling and individually manipulating a two-dimensional register of nuclear spin qubits. Each nuclear spin qubit is encoded in the ground $^{1}S_{0}$ manifold of $^{87}$Sr and is individually manipulated by site-selective addressing beams. We observe that spin relaxation is negligible after 5 seconds, indicating that $T_1\gg5$ s. Furthermore, utilizi…
▽ More
We introduce an optical tweezer platform for assembling and individually manipulating a two-dimensional register of nuclear spin qubits. Each nuclear spin qubit is encoded in the ground $^{1}S_{0}$ manifold of $^{87}$Sr and is individually manipulated by site-selective addressing beams. We observe that spin relaxation is negligible after 5 seconds, indicating that $T_1\gg5$ s. Furthermore, utilizing simultaneous manipulation of subsets of qubits, we demonstrate significant phase coherence over the entire register, estimating $T_2^\star = \left(21\pm7\right)$ s and measuring $T_2^\text{echo}=\left(42\pm6\right)$ s.
△ Less
Submitted 10 August, 2021;
originally announced August 2021.
-
Intrinsic current drive by electromagnetic electron temperature gradient turbulence in tokamak plasmas
Authors:
Wen He,
Lu Wang,
Shuitao Peng,
Weixin Guo,
Ge Zhuang
Abstract:
The mean parallel current density evolution equation is presented using electromagnetic (EM) gyrokinetic equation. There exist two types of intrinsic current driving mechanisms resulted from EM electron temperature gradient (ETG) turbulence. The first type is the divergence of residual turbulent flux including a residual stress-like term and a kinetic stress-like term. The second type is named as…
▽ More
The mean parallel current density evolution equation is presented using electromagnetic (EM) gyrokinetic equation. There exist two types of intrinsic current driving mechanisms resulted from EM electron temperature gradient (ETG) turbulence. The first type is the divergence of residual turbulent flux including a residual stress-like term and a kinetic stress-like term. The second type is named as residual turbulent source, which is driven by the correlation between density and parallel electric field fluctuations. The intrinsic current density driven by the residual turbulent source is negligible as compared to that driven by the residual turbulent flux. The ratio of intrinsic current density driven by EM ETG turbulence to the background bootstrap current density is estimated. The local intrinsic current density driven by the residual turbulent flux for mesoscale variation of turbulent flux can reach about 80% of the bootstrap current density in the core region of ITER standard scenario, but there is no net intrinsic current on a global scale. Based on this, the local intrinsic current driven by EM micro-turbulence and its effects on local modification of the profile of safety factor may be needed to be carefully taken into account in the future device with high beta_e which is the ratio between electron pressure to the magnetic pressure.
△ Less
Submitted 27 June, 2020;
originally announced June 2020.
-
Nanoscale magnetic resonance imaging of proteins in a single cell
Authors:
Pengfei Wang,
Sanyou Chen,
Maosen Guo,
Shijie Peng,
Mengqi Wang,
Ming Chen,
Wenchao Ma,
Rui Zhang,
Jihu Su,
Xing Rong,
Fazhan Shi,
Tao Xu,
Jiangfeng Du
Abstract:
Magnetic resonance imaging (MRI) is a non-invasive and label-free technique widely used in medical diagnosis and life science research, and its success has benefited greatly from continuing efforts on enhancing contrast and resolution. Here we reported nanoscale MRI in a single cell using an atomic-size quantum sensor. With nitrogen-vacancy center in diamond, the intracellular protein ferritin has…
▽ More
Magnetic resonance imaging (MRI) is a non-invasive and label-free technique widely used in medical diagnosis and life science research, and its success has benefited greatly from continuing efforts on enhancing contrast and resolution. Here we reported nanoscale MRI in a single cell using an atomic-size quantum sensor. With nitrogen-vacancy center in diamond, the intracellular protein ferritin has been imaged with a spatial resolution of ~ 10 nanometers, and ferritin-containing organelles were co-localized by correlative MRI and electron microscopy. Comparing to the current micrometer resolution in current state-of-art conventional MRI, our approach represents a 100-fold enhancement, and paves the way for MRI of intracellular proteins.
△ Less
Submitted 19 February, 2020;
originally announced February 2020.
-
Thermal Conductivity Modeling using Machine Learning Potentials: Application to Crystalline and Amorphous Silicon
Authors:
Xin Qian,
Shenyou Peng,
Xiaobo Li,
Yujie Wei,
Ronggui Yang
Abstract:
First-principles based modeling on phonon dynamics and transport using density functional theory and Boltzmann transport equation has proven powerful in predicting thermal conductivity of crystalline materials, but it remains unfeasible for modeling complex crystals and disordered solids due to the prohibitive computational cost to capture the disordered structure, especially when the quasiparticl…
▽ More
First-principles based modeling on phonon dynamics and transport using density functional theory and Boltzmann transport equation has proven powerful in predicting thermal conductivity of crystalline materials, but it remains unfeasible for modeling complex crystals and disordered solids due to the prohibitive computational cost to capture the disordered structure, especially when the quasiparticle "phonon" model breaks down. Recently, machine-learning regression algorithms show great promises for building high-accuracy potential fields for atomistic modeling with length and time scales far beyond those achievable by first-principles calculations. In this work, using both crystalline and amorphous silicon as examples, we develop machine learning based potential fields for predicting thermal conductivity. The machine learning based interatomic potential is derived from density functional theory calculations by stochastically sampling the potential energy surface in the configurational space. The thermal conductivities of both amorphous and crystalline silicon are then calculated using equilibrium molecular dynamics, which agree well with experimental measurements. This work documents the procedure for training the machine-learning based potentials for modeling thermal conductivity, and demonstrates that machine-learning based potential can be a promising tool for modeling thermal conductivity of both crystalline and amorphous materials with strong disorder.
△ Less
Submitted 21 July, 2019;
originally announced July 2019.
-
Angular Stripe Phase in Spin-Orbital-Angular-Momentum Coupled Bose Condensates
Authors:
Xiao-Long Chen,
Shi-Guo Peng,
Peng Zou,
Xia-Ji Liu,
Hui Hu
Abstract:
We propose that novel superfluid with supersolid-like properties - angular stripe phase - can be realized in a pancake-like spin-1/2 Bose gas with spin-orbital-angular-momentum coupling. We predict a rich ground-state phase diagram, including the vortex-antivortex pair phase, half-skyrmion phase, and two different angular stripe phases. The stripe phases feature modulated angular density-density c…
▽ More
We propose that novel superfluid with supersolid-like properties - angular stripe phase - can be realized in a pancake-like spin-1/2 Bose gas with spin-orbital-angular-momentum coupling. We predict a rich ground-state phase diagram, including the vortex-antivortex pair phase, half-skyrmion phase, and two different angular stripe phases. The stripe phases feature modulated angular density-density correlation with sizable contrast and can occupy a relatively large parameter space. The low-lying collective excitations, such as the dipole and breathing modes, show distinct behaviors in different phases. The existence of the novel stripe phase is also clearly indicated in the energetic and dynamic instabilities of collective modes near phase transitions. Our predictions of the angular stripe phase could be readily examined in current cold-atom experiments with $^{87}$Rb and $^{41}$K.
△ Less
Submitted 27 May, 2020; v1 submitted 8 January, 2019;
originally announced January 2019.
-
Expansion dynamics of a spherical Bose-Einstein condensate
Authors:
Ruizong Li,
Tianyou Gao,
Dongfang Zhang,
Shi-Guo Peng,
Lingran Kong,
Xing Shen,
Wuming Liu,
Kaijun Jiang
Abstract:
We experimentally and theoretically observe the expansion behaviors of a spherical Bose-Einstein condensate. A rubidium condensate is produced in an isotropic optical dipole trap with an asphericity of 0.037. We measure the variation of the condensate size during the expansion process. The free expansion of the condensate is isotropic, which is different from that of the condensate usually produce…
▽ More
We experimentally and theoretically observe the expansion behaviors of a spherical Bose-Einstein condensate. A rubidium condensate is produced in an isotropic optical dipole trap with an asphericity of 0.037. We measure the variation of the condensate size during the expansion process. The free expansion of the condensate is isotropic, which is different from that of the condensate usually produced in the anisotropic trap. The expansion in the short time is speeding and then after a long time the expansion velocity asymptotically approaches a constant value. We derive an analytic solution of the expansion behavior based on the spherical symmetry, allowing a quantitative comparison with the experimental measurement. The interaction energy of the condensate is gradually converted into the kinetic energy at the beginning of the expansion and the kinetic energy dominates after a long-time expansion. We obtain the interaction energy of the condensate in the trap by probing the expansion velocity, which is consistent with the theoretical prediction.
△ Less
Submitted 6 November, 2018;
originally announced November 2018.
-
Clocked Atom Delivery to a Photonic Crystal Waveguide
Authors:
A. P. Burgers,
L. S. Peng,
J. A. Muniz,
A. C. McClung,
M. J. Martin,
H. J. Kimble
Abstract:
Experiments and numerical simulations are described that develop quantitative understanding of atomic motion near the surfaces of nanoscopic photonic crystal waveguides (PCWs). Ultracold atoms are delivered from a moving optical lattice into the PCW. Synchronous with the moving lattice, transmission spectra for a guided-mode probe field are recorded as functions of lattice transport time and frequ…
▽ More
Experiments and numerical simulations are described that develop quantitative understanding of atomic motion near the surfaces of nanoscopic photonic crystal waveguides (PCWs). Ultracold atoms are delivered from a moving optical lattice into the PCW. Synchronous with the moving lattice, transmission spectra for a guided-mode probe field are recorded as functions of lattice transport time and frequency detuning of the probe beam. By way of measurements such as these, we have been able to validate quantitatively our numerical simulations, which are based upon detailed understanding of atomic trajectories that pass around and through nanoscopic regions of the PCW under the influence of optical and surface forces. The resolution for map** atomic motion is roughly 50 nm in space and 100 ns in time. By introducing auxiliary guided mode (GM) fields that provide spatially varying AC-Stark shifts, we have, to some degree, begun to control atomic trajectories, such as to enhance the flux into to the central vacuum gap of the PCW at predetermined times and with known AC-Stark shifts. Applications of these capabilities include enabling high fractional filling of optical trap sites within PCWs, calibration of optical fields within PCWs, and utilization of the time-dependent, optically dense atomic medium for novel nonlinear optical experiments.
△ Less
Submitted 17 October, 2018;
originally announced October 2018.
-
Observation of quantum phase transition in spin-orbital-angular-momentum coupled Bose-Einstein condensate
Authors:
Dongfang Zhang,
Tianyou Gao,
Peng Zou,
Lingran Kong,
Ruizong Li,
Xing Shen,
Xiao-Long Chen,
Shi-Guo Peng,
Mingsheng Zhan,
Han Pu,
Kaijun Jiang
Abstract:
Orbital angular momentum (OAM) of light represents a fundamental optical freedom that can be exploited to manipulate quantum state of atoms. In particular, it can be used to realize spin-orbital-angular-momentum (SOAM) coupling in cold atoms by inducing an atomic Raman transition using two laser beams with differing OAM. Rich quantum phases are predicted to exist in many-body systems with SOAM cou…
▽ More
Orbital angular momentum (OAM) of light represents a fundamental optical freedom that can be exploited to manipulate quantum state of atoms. In particular, it can be used to realize spin-orbital-angular-momentum (SOAM) coupling in cold atoms by inducing an atomic Raman transition using two laser beams with differing OAM. Rich quantum phases are predicted to exist in many-body systems with SOAM coupling. Their observations in laboratory, however, are often hampered by the limited control of the system parameters. In this work we report, for the first time, the experimental observation of the ground-state quantum phase diagram of the SOAM coupled Bose-Einstein condensate (BEC). The discontinuous variation of the spin polarization as well as the vorticity of the atomic wave function across the phase boundaries provides clear evidence of first-order phase transitions. Our results open up a new way to the study of phase transitions and exotic quantum phases in quantum gases.
△ Less
Submitted 22 June, 2018; v1 submitted 16 June, 2018;
originally announced June 2018.
-
Observation of phonon parametric down-conversion in a spherical Bose-Einstein condensate
Authors:
Tianyou Gao,
Jian-Song Pan,
Dongfang Zhang,
Lingran Kong,
Ruizong Li,
Xing Shen,
Xiaolong Chen,
Shi-Guo Peng,
Mingsheng Zhan,
W. Vincent Liu,
Kaijun Jiang
Abstract:
We report the observation of parametric down-conversion of phonons in a spherical Bose-Einstein condensate. The spherical symmetry, which is crucial for observing this phenomenon, is experimentally demonstrated by measuring the collective mode and expansion behavior of the condensate. The low-energy monopole mode is excited by coupling with a high-energy mode with a nearly twice eigen-frequency. T…
▽ More
We report the observation of parametric down-conversion of phonons in a spherical Bose-Einstein condensate. The spherical symmetry, which is crucial for observing this phenomenon, is experimentally demonstrated by measuring the collective mode and expansion behavior of the condensate. The low-energy monopole mode is excited by coupling with a high-energy mode with a nearly twice eigen-frequency. The population of the low-energy mode becomes maximum only when the high-energy mode is resonantly excited. Furthermore, we directly observe the parametric down-conversion process in the driving process, through simultaneously probing the two coupling modes. The experimental observation is consistent with the perturbation theory including the gravity effect. This work opens the challenge in related study of the condensate beyond mean-field theory and has potential applications in quantum information.
△ Less
Submitted 25 July, 2018; v1 submitted 12 May, 2018;
originally announced May 2018.
-
Field-Free Switching of Perpendicular Magnetic Tunnel Junction via Voltage-Gated Spin Hall Effect for Low-Power Spintronic Memory
Authors:
Shouzhong Peng,
Xiang Li,
Wang Kang,
He Zhang,
Lezhi Wang,
Zilu Wang,
Zhaohao Wang,
Youguang Zhang,
Kang L. Wang,
Weisheng Zhao
Abstract:
Spin Hall effect (SHE) and voltage-controlled magnetic anisotropy (VCMA) are two promising methods for low-power electrical manipulation of magnetization. Recently, magnetic field-free switching of perpendicular magnetization through SHE has been reported with the aid of an exchange bias from an antiferromagnetic IrMn layer. In this letter, we experimentally demonstrate that the IrMn/CoFeB/MgO str…
▽ More
Spin Hall effect (SHE) and voltage-controlled magnetic anisotropy (VCMA) are two promising methods for low-power electrical manipulation of magnetization. Recently, magnetic field-free switching of perpendicular magnetization through SHE has been reported with the aid of an exchange bias from an antiferromagnetic IrMn layer. In this letter, we experimentally demonstrate that the IrMn/CoFeB/MgO structure exhibits a VCMA effect of 39 fJ/Vm, which is comparable to that of the Ta/CoFeB/MgO structure. Magnetization dynamics under a combination of the SHE and VCMA are modeled and simulated. It is found that, by applying a voltage of 1.5 V, the critical SHE switching current can be decreased by 10 times owing to the VCMA effect, leading to low-power operations. Furthermore, a high-density spintronic memory structure can be built with multiple magnetic tunnel junctions (MTJs) located on a single IrMn strip. Through hybrid CMOS/MTJ simulations, we demonstrate that fast-speed write operations can be achieved with power consumption of only 8.5 fJ/bit. These findings reveal the possibility to realize high-density and low-power spintronic memory manipulated by voltage-gated SHE.
△ Less
Submitted 29 April, 2018;
originally announced April 2018.
-
Tunneling magnetoresistance enhancement by symmetrization in spin-orbit torque magnetic tunnel junction
Authors:
Jiaqi Zhou,
Weisheng Zhao,
Kaihua Cao,
Shouzhong Peng,
Zilu Wang,
Arnaud Bournel
Abstract:
Heavy metals with strong spin-orbit coupling (SOC) have been employed to generate spin current to control the magnetization dynamics by spin-orbit torque (SOT). Magnetic tunnel junction based on SOT (SOT-MTJ) is a promising application with efficient writing operation. Unfortunately, SOT-MTJ faces the low tunneling magnetoresistance (TMR) problem. In this work, we present an ab initio calculation…
▽ More
Heavy metals with strong spin-orbit coupling (SOC) have been employed to generate spin current to control the magnetization dynamics by spin-orbit torque (SOT). Magnetic tunnel junction based on SOT (SOT-MTJ) is a promising application with efficient writing operation. Unfortunately, SOT-MTJ faces the low tunneling magnetoresistance (TMR) problem. In this work, we present an ab initio calculation on the TMR in SOT-MTJ. It is demonstrated that TMR would be enhanced by SOT-MTJ symmetry structure. The symmetrization induces interfacial resonant states (IRSs). When IRSs match identical resonances at the opposite barrier interface, resonant tunneling occurs in SOT-MTJ, which significantly contributes to the conductance in parallel configuration and improves TMR. We demonstrate the occurrence of resonant tunneling by transmission spectra, density of scattering states and differential density of states. We also point out that the thickness of heavy metal has limited influence on TMR. This work would benefit the TMR optimization in SOT-MTJ, as well as the SOT spintronics device.
△ Less
Submitted 14 May, 2018; v1 submitted 15 February, 2018;
originally announced February 2018.
-
Tuning the Dzyaloshinskii-Moriya Interaction in Pt/Co/MgO heterostructures through MgO thickness
Authors:
Anni Cao,
Xueying Zhang,
Bert Koopmans,
Shouzhong Peng,
Yu Zhang,
Zilu Wang,
Shaohua Yan,
Hongxin Yang,
Weisheng Zhao
Abstract:
The interfacial Dzyaloshinskii-Moriya interaction (DMI) in the ferromagnetic/heavy metal ultra-thin film structures , has attracted a lot of attention thanks to its capability to stabilize Neel-type domain walls (DWs) and magnetic skyrmions for the realization of non-volatile memory and logic devices. In this study, we demonstrate that magnetic properties in perpendicularly magnetized Ta/Pt/Co/MgO…
▽ More
The interfacial Dzyaloshinskii-Moriya interaction (DMI) in the ferromagnetic/heavy metal ultra-thin film structures , has attracted a lot of attention thanks to its capability to stabilize Neel-type domain walls (DWs) and magnetic skyrmions for the realization of non-volatile memory and logic devices. In this study, we demonstrate that magnetic properties in perpendicularly magnetized Ta/Pt/Co/MgO/Pt heterostructures, such as magnetization and DMI, can be significantly influenced through both the MgO and the Co ultrathin film thickness. By using a field-driven creep regime domain expansion technique, we find that non-monotonic tendencies of DMI field appear when changing the thickness of MgO and the MgO thickness corresponding to the largest DMI field varies as a function of the Co thicknesses. We interpret this efficient control of DMI as subtle changes of both Pt/Co and Co/MgO interfaces, which provide a method to investigate ultra-thin structures design to achieve skyrmion electronics.
△ Less
Submitted 2 April, 2018; v1 submitted 24 October, 2017;
originally announced October 2017.
-
Current-induced magnetization switching in atom-thick tungsten engineered perpendicular magnetic tunnel junctions with large tunnel magnetoresistance
Authors:
Mengxing Wang,
Wenlong Cai,
Kaihua Cao,
Jiaqi Zhou,
Jerzy Wrona,
Shouzhong Peng,
Huaiwen Yang,
Jiaqi Wei,
Wang Kang,
Youguang Zhang,
Jürgen Langer,
Berthold Ocker,
Albert Fert,
Weisheng Zhao
Abstract:
Perpendicular magnetic tunnel junctions based on MgO/CoFeB structures are of particular interest for magnetic random-access memories because of their excellent thermal stability, scaling potential, and power dissipation. However, the major challenge of current-induced switching in the nanopillars with both a large tunnel magnetoresistance ratio and a low junction resistance is still to be met. Her…
▽ More
Perpendicular magnetic tunnel junctions based on MgO/CoFeB structures are of particular interest for magnetic random-access memories because of their excellent thermal stability, scaling potential, and power dissipation. However, the major challenge of current-induced switching in the nanopillars with both a large tunnel magnetoresistance ratio and a low junction resistance is still to be met. Here, we report spin transfer torque switching in nano-scale perpendicular magnetic tunnel junctions with a magnetoresistance ratio up to 249% and a resistance area product as low as 7.0 Ω.μm2, which consists of atom-thick W layers and double MgO/CoFeB interfaces. The efficient resonant tunnelling transmission induced by the atom-thick W layers could contribute to the larger magnetoresistance ratio than conventional structures with Ta layers, in addition to the robustness of W layers against high temperature diffusion during annealing. The switching critical current density could be lower than 3.0 MA.cm-2 for devices with a 45 nm radius.
△ Less
Submitted 23 January, 2018; v1 submitted 14 August, 2017;
originally announced August 2017.
-
3D spherical-cap fitting procedure for (truncated) sessile nano- and micro-droplets & -bubbles
Authors:
Huanshu Tan,
Shuhua Peng,
Chao Sun,
Xuehua Zhang,
Detlef Lohse
Abstract:
In the study of nanobubbles, nanodroplets or nanolenses immobilised on a substrate, a cross-section of a spherical-cap is widely applied to extract geometrical information from atomic force microscopy (AFM) topographic images. In this paper, we have developed a comprehensive 3D spherical cap fitting procedure (3D-SCFP) to extract morphologic characteristics of complete or truncated spherical caps…
▽ More
In the study of nanobubbles, nanodroplets or nanolenses immobilised on a substrate, a cross-section of a spherical-cap is widely applied to extract geometrical information from atomic force microscopy (AFM) topographic images. In this paper, we have developed a comprehensive 3D spherical cap fitting procedure (3D-SCFP) to extract morphologic characteristics of complete or truncated spherical caps from AFM images. Our procedure integrates several advanced digital image analysis techniques to construct a 3D spherical cap model, from which the geometrical parameters of the nanostructures are extracted automatically by a simple algorithm. The procedure takes into account all valid data points in the construction of the 3D spherical cap model to achieve high fidelity in morphology analysis. We compare our 3D fitting procedure with the commonly used 2D cross-sectional profile fitting method to determine the contact angle of a complete spherical cap and a truncated spherical cap. The results from 3D-SCFP are consistent and accurate, while 2D fitting is unavoidably arbitrary in selection of the cross-section and has a much lower number of data points on which the fitting can be based, which in addition is biased to the top of the spherical cap. We expect that the developed 3D spherical-cap fitting procedure will find many applications in imaging analysis.
△ Less
Submitted 5 June, 2017;
originally announced June 2017.
-
Electromagnetic theory of turbulent acceleration of parallel flow and momentum conservation
Authors:
Shuitao Peng,
Lu Wang
Abstract:
Intrinsic flow in plasma physics is a long-standing puzzle, since it is difficult to understand its origin without contradiction to momentum conservation in conventional wisdom. It is proved that the electromagnetic turbulent acceleration as a candidate for intrinsic parallel flow generation driven by pressure gradient along the total magnetic field line does not contradict momentum conservation.…
▽ More
Intrinsic flow in plasma physics is a long-standing puzzle, since it is difficult to understand its origin without contradiction to momentum conservation in conventional wisdom. It is proved that the electromagnetic turbulent acceleration as a candidate for intrinsic parallel flow generation driven by pressure gradient along the total magnetic field line does not contradict momentum conservation. The conserved quantity corresponding to axial symmetry is the total gyrocenter parallel canonical momentum carried by both species or the total gyrocenter parallel momentum including the ion gyrocenter kinematic momentum and electromagnetic fields momentum, but not the ion kinematic momentum, or even the ion parallel flow. A conservation equation of total parallel momentum including the ion particles' kinematic momentum and electromagnetic fields momentum is also presented.
△ Less
Submitted 5 January, 2017;
originally announced January 2017.
-
Intrinsic parallel rotation drive by electromagnetic ion temperature gradient turbulence
Authors:
Shuitao Peng,
Lu Wang,
Yuan Pan
Abstract:
The quasilinear intrinsic parallel flow drive including parallel residual stress, kinetic stress, cross Maxwell stress and parallel turbulent acceleration by electromagnetic ion temperature gradient (ITG) turbulence is calculated analytically using electromagnetic gyrokinetic theory. Both the kinetic stress and cross Maxwell stress also enter the mean parallel flow velocity equation via their dive…
▽ More
The quasilinear intrinsic parallel flow drive including parallel residual stress, kinetic stress, cross Maxwell stress and parallel turbulent acceleration by electromagnetic ion temperature gradient (ITG) turbulence is calculated analytically using electromagnetic gyrokinetic theory. Both the kinetic stress and cross Maxwell stress also enter the mean parallel flow velocity equation via their divergence, as for the usual residual stress. The turbulent acceleration driven by ion pressure gradient along the total magnetic field (including equilibrium magnetic field and fluctuating radial magnetic field) cannot be written as a divergence of stress, and so should be treated as a local source/sink. All these terms can provide intrinsic parallel rotation drive. Electromagnetic effects reduce the non-resonant electrostatic stress force and even reverse it, but enhance the resonant stress force. Both the non-resonant and resonant turbulent acceleration terms are also enhanced by electromagnetic effects. The possible implications of our results for experimental observations are discussed.
△ Less
Submitted 17 November, 2016;
originally announced November 2016.
-
Making sound vortices by metasurfaces
Authors:
Li** Ye,
Chunyin Qiu,
Jiuyang Lu,
Kun Tang,
Han Jia,
Manzhu Ke,
Shasha Peng,
Zhengyou Liu
Abstract:
Based on the Huygens-Fresnel principle, a metasurface structure is designed to generate a sound vortex beam in airborne environment. The metasurface is constructed by a thin planar plate perforated with a circular array of deep subwavelength resonators with desired phase and amplitude responses. The metasurface approach in making sound vortices is validated well by full-wave simulations and experi…
▽ More
Based on the Huygens-Fresnel principle, a metasurface structure is designed to generate a sound vortex beam in airborne environment. The metasurface is constructed by a thin planar plate perforated with a circular array of deep subwavelength resonators with desired phase and amplitude responses. The metasurface approach in making sound vortices is validated well by full-wave simulations and experimental measurements. Potential applications of such artificial spiral beams can be anticipated, as exemplified experimentally by the torque effect exerting on an absorbing disk.
△ Less
Submitted 15 June, 2016;
originally announced June 2016.
-
Highly efficient isolation of waterborne sound by an air-sealed metasurface
Authors:
Xiaoxue Bai,
Chunyin Qiu,
Xinhua Wen,
Shasha Peng,
Manzhu Ke,
Zhengyou Liu
Abstract:
Underwater sound isolation has been a long-standing fundamental issue in industry and military fields. Starting from a simple theoretical model, here an air-sealed metasurface is proposed to overcome this problem. Comparing with the sample without filling air, the effective impedance of the air-sealed one is greatly reduced and strikingly mismatch with water, accompanying another merit of low soun…
▽ More
Underwater sound isolation has been a long-standing fundamental issue in industry and military fields. Starting from a simple theoretical model, here an air-sealed metasurface is proposed to overcome this problem. Comparing with the sample without filling air, the effective impedance of the air-sealed one is greatly reduced and strikingly mismatch with water, accompanying another merit of low sound speed. Deeply suppressed sound transmission (~10-5) through such a metasurface is observed experimentally over a wide range of ultrasonic frequencies and incident angles.
△ Less
Submitted 15 June, 2016;
originally announced June 2016.
-
Large influence of cap** layers on tunnel magnetoresistance in magnetic tunnel junctions
Authors:
Jiaqi Zhou,
Weisheng Zhao,
Yin Wang,
Shouzhong Peng,
Junfeng Qiao,
Li Su,
Lang Zeng,
Na Lei,
Lei Liu,
Youguang Zhang,
Arnaud Bournel
Abstract:
It has been reported in experiments that cap** layers which enhance the perpendicular magnetic anisotropy (PMA) of magnetic tunnel junctions (MTJs) induce great impact on the tunnel magnetoresistance (TMR). To explore the essential influence caused by cap** layers, we carry out ab initio calculations on TMR in the X(001)|CoFe(001)|MgO(001)|CoFe(001)|X(001) MTJ, where X represents the cap** l…
▽ More
It has been reported in experiments that cap** layers which enhance the perpendicular magnetic anisotropy (PMA) of magnetic tunnel junctions (MTJs) induce great impact on the tunnel magnetoresistance (TMR). To explore the essential influence caused by cap** layers, we carry out ab initio calculations on TMR in the X(001)|CoFe(001)|MgO(001)|CoFe(001)|X(001) MTJ, where X represents the cap** layer material which can be tungsten, tantalum or hafnium. We report TMR in different MTJs and demonstrate that tungsten is an ideal candidate for a giant TMR ratio. The transmission spectrum in Brillouin zone is presented. It can be seen that in the parallel condition of MTJ, sharp transmission peaks appear in the minority-spin channel. This phenomenon is attributed to the resonant tunnel transmission effect and we explained it by the layer-resolved density of states (DOS). In order to explore transport properties in MTJs, the density of scattering states (DOSS) was studied from the point of band symmetry. It has been found that CoFe|tungsten interface blocks scattering states transmission in the anti-parallel condition. This work reports TMR and transport properties in MTJs with different cap** layers, and proves that tungsten is a proper cap** layer material, which would benefit the design and optimization of MTJs.
△ Less
Submitted 28 December, 2016; v1 submitted 22 May, 2016;
originally announced May 2016.
-
Three-dimensional single gyroid photonic crystals with a mid-infrared bandgap
Authors:
Siying Peng,
Runyu Zhang,
Valerian H. Chen,
Emil T. Khabiboulline,
Paul Braun,
Harry A. Atwater
Abstract:
A gyroid structure is a distinct morphology that is triply periodic and consists of minimal isosurfaces containing no straight lines. We have designed and synthesized amorphous silicon (a-Si) mid-infrared gyroid photonic crystals that exhibit a complete bandgap in infrared spectroscopy measurements. Photonic crystals were synthesized by deposition of a-Si/Al2O3 coatings onto a sacrificial polymer…
▽ More
A gyroid structure is a distinct morphology that is triply periodic and consists of minimal isosurfaces containing no straight lines. We have designed and synthesized amorphous silicon (a-Si) mid-infrared gyroid photonic crystals that exhibit a complete bandgap in infrared spectroscopy measurements. Photonic crystals were synthesized by deposition of a-Si/Al2O3 coatings onto a sacrificial polymer scaffold defined by two-photon lithography. We observed a 100% reflectance at 7.5 \mum for single gyroids with a unit cell size of 4.5 \mum, in agreement with the photonic bandgap position predicted from full-wave electromagnetic simulations, whereas the observed reflection peak shifted to 8 um for a 5.5 \mum unit cell size. This approach represents a simulation-fabrication-characterization platform to realize three-dimensional gyroid photonic crystals with well-defined dimensions in real space and tailored properties in momentum space.
△ Less
Submitted 13 April, 2016;
originally announced April 2016.
-
Intrinsic rotation drive by collisionless trapped electron mode turbulence
Authors:
Lu Wang,
Shuitao Peng,
P. H. Diamond
Abstract:
Both the parallel residual stress and parallel turbulent acceleration driven by electrostatic collisionsless trapped electron mode (CTEM) turbulence are calculated analytically using gyrokinetic theory. Quasilinear results show that the parallel residual stress contributes an outward flux of co-current rotation for normal magnetic shear and turbulence intensity profile increasing outward. This may…
▽ More
Both the parallel residual stress and parallel turbulent acceleration driven by electrostatic collisionsless trapped electron mode (CTEM) turbulence are calculated analytically using gyrokinetic theory. Quasilinear results show that the parallel residual stress contributes an outward flux of co-current rotation for normal magnetic shear and turbulence intensity profile increasing outward. This may induce intrinsic counter-current rotation or flattening of the co-current rotation profile. The parallel turbulent acceleration driven by CTEM turbulence vanishes, due to the absence of a phase shift between density fluctuation and ion pressure fluctuation. This is different from the case of ion temperature gradient (ITG) turbulence, for which the turbulent acceleration can provide co-current drive for normal magnetic shear and turbulence intensity profile increasing outward. Its order of magnitude is predicted to be the same as that of the divergence of the residual stress [Lu Wang and P.H. Diamond, Phys. Rev. Lett. {\bf 110}, 265006 (2013)]. A possible connection of these theoretical results to experimental observations of electron cyclotron heating effects on toroidal rotation is discussed.
△ Less
Submitted 7 April, 2016;
originally announced April 2016.
-
Quantitative analysis of intermediately and infinitely thick samples with thin sample approach without sample preparation using confocal X-ray fluorescence
Authors:
Xue-Peng Sun,
Zhi-Guo Liu,
Tian-Xi Sun,
Song Peng,
Wei-Yuan Sun,
Fang-Zuo Li,
Bo-Wen Jiang,
Yong-Zhong Ma,
Xun-Liang Ding
Abstract:
In order to validate that the confocal X-ray fluorescence had potential applications in analyzing the intermediately and infinitely thick samples with thin sample approach without sample preparations, as an example, the confocal X-ray fluorescence based on polycapillary X-ray optics was used to analyze multi elements solutions.
In order to validate that the confocal X-ray fluorescence had potential applications in analyzing the intermediately and infinitely thick samples with thin sample approach without sample preparations, as an example, the confocal X-ray fluorescence based on polycapillary X-ray optics was used to analyze multi elements solutions.
△ Less
Submitted 27 May, 2015;
originally announced May 2015.
-
Enhanced trap** of colding lithium by using the multiple-sideband cooling in a two-dimensional magneto-optical trap
Authors:
Kai Li,
Dongfang Zhang,
Tianyou Gao,
Shi-Guo Peng,
Kaijun Jiang
Abstract:
Trap** lithium with a big number in a simplified experimental setup has difficulties and challenges today. In this paper, we experimentally demonstrate the enhancement of \textsuperscript{6}Li trap** efficiency in a three-dimensional magneto-optical trap (3D MOT) by using the multiple-sideband cooling in a two-dimensional magneto-optical trap (2D MOT). To improve the number of trapped atoms, w…
▽ More
Trap** lithium with a big number in a simplified experimental setup has difficulties and challenges today. In this paper, we experimentally demonstrate the enhancement of \textsuperscript{6}Li trap** efficiency in a three-dimensional magneto-optical trap (3D MOT) by using the multiple-sideband cooling in a two-dimensional magneto-optical trap (2D MOT). To improve the number of trapped atoms, we broaden the cooling light spectrum to 102 MHz composed of seven frequency components and then trap atoms with a number of $6.0\times10^8$ which is about 4 times compared to that in the single-frequency cooling. The capture velocity and dependence of atomic number on the laser detuning have been analyzed, where the experimental result has a good agreement with the theoretical prediction based on a simple two-level model. We also analyze the loss rate of alkali metals due to fine-structure exchanging collisions and find that the multiple-sideband cooling is special valid for lithium.
△ Less
Submitted 13 May, 2015;
originally announced May 2015.
-
Some Experiences on BEPCII SRF System Operation
Authors:
Huang Tong-ming,
Lin Hai-ying,
Sha Peng,
Sun Yi,
Pan Wei-min,
Wang Guang-wei,
Dai Jian-**,
Li Zhong-quan,
Ma Qiang,
Wang Qun-yao,
Zhao Guang-yuan,
Mi Zheng-hui
Abstract:
The Superconducting Radio Frequency (SRF) system of the upgrade project of Bei**g Electron Positron Collider (BEPCII) has been in operation for almost 8 years. The SRF system has accelerated both electron and positron at the design beam current of 910 mA successfully, and a high beam intensity colliding of 860 mA (electron)*910 mA (positron) has been achieved in April 2014. Many problems were enc…
▽ More
The Superconducting Radio Frequency (SRF) system of the upgrade project of Bei**g Electron Positron Collider (BEPCII) has been in operation for almost 8 years. The SRF system has accelerated both electron and positron at the design beam current of 910 mA successfully, and a high beam intensity colliding of 860 mA (electron)*910 mA (positron) has been achieved in April 2014. Many problems were encountered during the operation, among which some were solved and some remain unsolved. This paper will describe some experiences on BEPCII SRF system operation, including the symptoms, causes and solutions.
△ Less
Submitted 19 November, 2014;
originally announced November 2014.
-
Molecular Split-Ring Resonators Based on Metal String Complexes
Authors:
Yao Shen,
Hsin-Yu Ko,
Qing Ai,
Shie-Ming Peng,
Bih-Yaw **
Abstract:
Metal string complexes or extended metal atom chains (EMACs) belong to a family of molecules that consist of a linear chain of directly bonded metal atoms embraced helically by four multidentate organic ligands. These four organic ligands are usually made up of repeating pyridyl units, single-nitrogen-substituted heterocyclic annulenes, bridged by independent amido groups. Here, in this paper, we…
▽ More
Metal string complexes or extended metal atom chains (EMACs) belong to a family of molecules that consist of a linear chain of directly bonded metal atoms embraced helically by four multidentate organic ligands. These four organic ligands are usually made up of repeating pyridyl units, single-nitrogen-substituted heterocyclic annulenes, bridged by independent amido groups. Here, in this paper, we show that these heterocyclic annulenes are actually nanoscale molecular split-ring resonators (SRRs) that can exhibit simultaneous negative electric permittivity and magnetic permeability in the UV-Vis region. Moreover, a monolayer of self-assembled EMACs is a periodic array of molecular SRRs which can be considered as a negative refractive index material. In the molecular scale, where the quantum-size effect is significant, we apply the tight-binding method to obtain the frequency-dependent permittivity and permeability of these molecular SRRs with their tensorial properties carefully considered.
△ Less
Submitted 6 February, 2014;
originally announced February 2014.
-
Design of a 325MHz SC Spoke040 cavity at IHEP
Authors:
Peng Yinghua,
Zhang Xinying,
Sha Peng,
Pan Weimin,
Li Han
Abstract:
The 325MHz, β=0.40 superconducting single spoke cavity (Spoke040) was one of the most challenges for the China-ADS (Accelerator Driven System) project. The design was finished, and the fabrication was in progressing. In this paper, we studied the main radio frequency (RF) and mechanical parameters, and compared the arc-shaped and plate-shaped end group structures.
The 325MHz, β=0.40 superconducting single spoke cavity (Spoke040) was one of the most challenges for the China-ADS (Accelerator Driven System) project. The design was finished, and the fabrication was in progressing. In this paper, we studied the main radio frequency (RF) and mechanical parameters, and compared the arc-shaped and plate-shaped end group structures.
△ Less
Submitted 18 December, 2013;
originally announced December 2013.
-
On the energy conservation electrostatic PIC/MC simulating: benchmark and application to the radio frequency discharges
Authors:
Wang Hong-Yu,
Jiang Wei,
Sun Peng,
Kong Ling-Bao
Abstract:
We benchmark and analyze the error of energy conservation (EC) scheme for Particle in cell/Monte-Carlo Couple (PIC/MCC) algorithms by a radio frequency discharging simulation. The plasma heating behaviors and electron distributing functions obtained by 1D simulation are analyzed. Both explicit and implicit algorithms are checked. The results showed that the EC scheme can eliminated the self-heatin…
▽ More
We benchmark and analyze the error of energy conservation (EC) scheme for Particle in cell/Monte-Carlo Couple (PIC/MCC) algorithms by a radio frequency discharging simulation. The plasma heating behaviors and electron distributing functions obtained by 1D simulation are analyzed. Both explicit and implicit algorithms are checked. The results showed that the EC scheme can eliminated the self-heating with wide grid spacing in both cases with a small reduction of the accuracies. In typical parameters, the EC implicit scheme has higher precision than EC explicit scheme.
Some "numerical cooling" behaviors are observed and analyzed. Some other error are analyzed also. The analysis showed
EC implicit scheme can be used to qualitative estimation of some discharge problems with much less computational resource costs without much loss of accuracies.
△ Less
Submitted 28 January, 2014; v1 submitted 19 October, 2013;
originally announced October 2013.
-
Design study on very low Beta spoke cavity for China-ADS
Authors:
Li Han,
Sha Peng,
Dai Jian**,
Huang Hong,
Wang Qunyao
Abstract:
Very low Beta superconducting spoke cavity is one of the key challenges for China-ADS project. In this paper, a new structure of 3*Beta*lamda/2 spoke cavity is first presented. Its RF and mechanical properties are simulated using CST-MWS and ANSYS, and compared with the traditional Beta*lamda/2 spoke structure.
Very low Beta superconducting spoke cavity is one of the key challenges for China-ADS project. In this paper, a new structure of 3*Beta*lamda/2 spoke cavity is first presented. Its RF and mechanical properties are simulated using CST-MWS and ANSYS, and compared with the traditional Beta*lamda/2 spoke structure.
△ Less
Submitted 5 May, 2013;
originally announced May 2013.
-
The study of tuning system for BEPC II
Authors:
Mi Zhenghui,
Sun Yi,
Pan Weimin,
Wang Guangwei,
Li Zhongquan,
Dai Jian**,
Ma Qiang,
Lin Haiying,
Xu Bo,
Huang Hong,
Wang Qunyao,
Xu Yufen,
Zhao Guangyuan,
Huang Tongming,
Sha Peng,
Zhang Xinying,
Meng Fanbo,
Li Han,
Chen Xu,
Zhao Danyang,
Zhang Juan,
Peng Yinghua
Abstract:
Tuning system plays a very important role when superconducting cavity works. It cooperates with other control loops, to adjust the frequency of cavity with high precision, reduce the reflection power, guarantee the stability of beam and ensure the safety of superconducting cavity. This paper focuses mainly on the tuning system working principle, the working state and problems that BEPC (Bei**g El…
▽ More
Tuning system plays a very important role when superconducting cavity works. It cooperates with other control loops, to adjust the frequency of cavity with high precision, reduce the reflection power, guarantee the stability of beam and ensure the safety of superconducting cavity. This paper focuses mainly on the tuning system working principle, the working state and problems that BEPC (Bei**g Electron Positron Collider) II has encountered during operation.
△ Less
Submitted 8 April, 2013;
originally announced April 2013.
-
Low beta spoke cavity multipacting analysis
Authors:
Xu Bo,
Li Han,
Zhang Juan,
Sha Peng,
Wang Qunyao,
Lin Haiying,
Huang Hong,
Dai Jian**,
Sun Yi,
Wang Guangwei,
Pan Weimin
Abstract:
The simulation and analysis for electron multipacting phenomenon in low β spoke superconducting cavity in ADS proton accelerator are proposed. Using both CST and Track3P codes, the electron multipacting calculation for β = 0.12 spoke superconducting cavity is implemented. The methods of multipacting calculation on both codes are studied and described. With the comparison between the calculation re…
▽ More
The simulation and analysis for electron multipacting phenomenon in low β spoke superconducting cavity in ADS proton accelerator are proposed. Using both CST and Track3P codes, the electron multipacting calculation for β = 0.12 spoke superconducting cavity is implemented. The methods of multipacting calculation on both codes are studied and described. With the comparison between the calculation results and the cavity vertical test results, the accuracy and reliability of different code on calculating multipacting are analyzed. Multipacting calculation can help to understand the result of vertical test and also can help to do the optimation in cavity design.
△ Less
Submitted 26 March, 2013;
originally announced March 2013.
-
Horizontal Test for BEPCII 500MHz Spare Cavity
Authors:
Mi Zhenghui,
Sun Yi,
Wang Guangwei,
Pan Weimin,
Li Zhongquan,
Dai Jian**,
Ma Qiang,
Lin Haiying,
Xu bo,
Huang Hong,
Wang Qunyao,
Xu Yufen,
Zhao Guangyuan,
Huang Tongming,
Sha Peng,
Liu Ya**,
Meng Fanbo,
Qiu Feng,
Li Han,
Chen Xu,
Zhao Danyang,
Zhang Juan
Abstract:
The horizontal test for BEPCII 500MHz spare cavity has been completed in IHEP. The max voltage of the cavity is 2.17MV, Q0 is 5.78\times108.This paper mainly reports coupler aging parameters before the horizontal test, as well as the parameters during cool-down the change of frequency, loaded Q, vacuum and the deformation of the cavity with temperature. And the test results were analyzed.
The horizontal test for BEPCII 500MHz spare cavity has been completed in IHEP. The max voltage of the cavity is 2.17MV, Q0 is 5.78\times108.This paper mainly reports coupler aging parameters before the horizontal test, as well as the parameters during cool-down the change of frequency, loaded Q, vacuum and the deformation of the cavity with temperature. And the test results were analyzed.
△ Less
Submitted 12 December, 2011;
originally announced December 2011.
-
Beam optimization of RFQ and SFRFQ combined accelerator at Peking University
Authors:
Minglei Kang,
Yuanrong Lu,
Zhi Wang,
Kun Zhu,
Xueqing Yan,
Shuli Gao,
Shixiang Peng,
Zhiyu Guo,
Jiaxun Fang,
Jiaer Chen
Abstract:
The Peking University Integral Split Ring Radio Frequency Quadrupole(ISR RFQ) accelerator was constructed in 1999 with a high duty factor 16.7% and repetition frequency 166Hz, and it was able to accelerate N+, O+,O-, C+ and He+ from 1.6kev/u to 65keV/u. It was later upgraded as an injector of the Separated Function RFQ (SFRFQ). The experiments indicated that the maximum accelerated O+ beam current…
▽ More
The Peking University Integral Split Ring Radio Frequency Quadrupole(ISR RFQ) accelerator was constructed in 1999 with a high duty factor 16.7% and repetition frequency 166Hz, and it was able to accelerate N+, O+,O-, C+ and He+ from 1.6kev/u to 65keV/u. It was later upgraded as an injector of the Separated Function RFQ (SFRFQ). The experiments indicated that the maximum accelerated O+ beam current could exceed 3.2mA with energy 1.03MeV and an energy spread (FWHM) 3.1%. Then the beam transports through a 1m-long magnetic triplet to the entrance of SFRFQ and is finally accelerated to 1.64MeV. The beam conditioning of RFQ were carefully optimized to satisfy the requirements of the SFRFQ. The combined accelerator eventually can deliver 0.53mA O+ beam with energy 1.65MeV, which has sufficiently demonstrated the feasibility of the SFRFQ structure.
△ Less
Submitted 24 November, 2010;
originally announced November 2010.