-
Riptide: a proton-recoil track imaging detector for fast neutrons
Authors:
C. Pisanti,
A. Berardi,
P. Console Camprini,
F. Giacomini,
C. Massimi,
A. Mengarelli,
A. Musumarra,
M. G. Pellegriti,
R. Ridolfi,
R. Spighi,
N. Terranova,
M. Villa
Abstract:
Riptide is a detector concept aiming to track fast neutrons. It is based on neutron--proton elastic collisions inside a plastic scintillator, where the neutron momentum can be measured by imaging the scintillation light. More specifically, by stereoscopically imaging the recoil proton tracks, the proposed apparatus provides neutron spectrometry capability and enable the online analysis of the spec…
▽ More
Riptide is a detector concept aiming to track fast neutrons. It is based on neutron--proton elastic collisions inside a plastic scintillator, where the neutron momentum can be measured by imaging the scintillation light. More specifically, by stereoscopically imaging the recoil proton tracks, the proposed apparatus provides neutron spectrometry capability and enable the online analysis of the specific energy loss along the track. In principle, the spatial and topological event reconstruction enables particle discrimination, which is a crucial property for neutron detectors. In this contribution, we report the advances on the Riptide detector concept. In particular, we have developed a Geant4 optical simulation to demonstrate the possibility of reconstructing with sufficient precision the tracks and the vertices of neutron interactions inside a plastic scintillator. To realistically model the optics of the scintillation detector, mono-energetic protons were generated inside a $6\times6\times6$ cm$^3$ cubic BC-408 scintillator, and the produced optical photons were propagated and then recorded on a scoring plane corresponding to the surfaces of the cube. The photons were then transported through an optical system to a $2\times2$ cm$^2$ photo sensitive area with 1 Megapixel. Moreover, we have developed two different analysis procedures to reconstruct 3D tracks: one based on data fitting and one on Principal Component Analysis. The main results of this study will be presented with a particular focus on the role of the optical system and the attainable spatial and energy resolution.
△ Less
Submitted 8 December, 2023;
originally announced December 2023.
-
Pushing the high count rate limits of scintillation detectors for challenging neutron-capture experiments
Authors:
J. Balibrea Correa,
J. Lerendegui-Marco,
V. Babiano-Suarez,
C. Domingo-Pardo,
I. Ladarescu,
A. Tarifeño-Saldivia,
V. Alcayne,
D. Cano-Ott,
E. González-Romero,
T. Martínez,
E. Mendoza,
A. Pérez de Rada,
J. Plaza del Olmo,
A. Sánchez-Caballero,
A. Casanovas,
F. Calviño,
S. Valenta,
O. Aberle,
S. Altieri,
S. Amaducci,
J. Andrzejewski,
M. Bacak,
C. Beltrami,
S. Bennett,
A. P. Bernardes
, et al. (109 additional authors not shown)
Abstract:
One of the critical aspects for the accurate determination of neutron capture cross sections when combining time-of-flight and total energy detector techniques is the characterization and control of systematic uncertainties associated to the measuring devices. In this work we explore the most conspicuous effects associated to harsh count rate conditions: dead-time and pile-up effects. Both effects…
▽ More
One of the critical aspects for the accurate determination of neutron capture cross sections when combining time-of-flight and total energy detector techniques is the characterization and control of systematic uncertainties associated to the measuring devices. In this work we explore the most conspicuous effects associated to harsh count rate conditions: dead-time and pile-up effects. Both effects, when not properly treated, can lead to large systematic uncertainties and bias in the determination of neutron cross sections. In the majority of neutron capture measurements carried out at the CERN n\_TOF facility, the detectors of choice are the C$_{6}$D$_{6}$ liquid-based either in form of large-volume cells or recently commissioned sTED detector array, consisting of much smaller-volume modules. To account for the aforementioned effects, we introduce a Monte Carlo model for these detectors mimicking harsh count rate conditions similar to those happening at the CERN n\_TOF 20~m fligth path vertical measuring station. The model parameters are extracted by comparison with the experimental data taken at the same facility during 2022 experimental campaign. We propose a novel methodology to consider both, dead-time and pile-up effects simultaneously for these fast detectors and check the applicability to experimental data from $^{197}$Au($n$,$γ$), including the saturated 4.9~eV resonance which is an important component of normalization for neutron cross section measurements.
△ Less
Submitted 2 November, 2023;
originally announced November 2023.
-
A proton-recoil track imaging system for fast neutrons: the RIPTIDE detector
Authors:
P. Console Camprini,
F. Leone,
C. Massimi,
A. Musumarra,
M. G. Pellegriti,
C. Pisanti,
F. Romano,
R. Spighi,
N. Terranova,
M. Villa
Abstract:
Fast neutron detection is often based on the neutron-proton elastic scattering reaction: the ionization caused by recoil protons in a hydrogenous material constitutes the basic information for the design and development of a class of neutron detectors. Although experimental techniques have continuously improved, proton-recoil track imaging remains still at the frontier of n-detection systems, due…
▽ More
Fast neutron detection is often based on the neutron-proton elastic scattering reaction: the ionization caused by recoil protons in a hydrogenous material constitutes the basic information for the design and development of a class of neutron detectors. Although experimental techniques have continuously improved, proton-recoil track imaging remains still at the frontier of n-detection systems, due to the high photon sensitivity required. Several state-of-the-art approaches for neutron tracking by using n-p single and double scattering - referred to as Recoil Proton Track Imaging (RPTI) - can be found in the literature. So far, they have showed limits in terms of detection efficiency, complexity, cost, and implementation. In order to address some of these deficiencies, we have proposed RIPTIDE a novel recoil-proton track imaging detector in which the light output produced by a fast scintillator is used to perform a complete reconstruction in space and time of the interaction events. The proposed idea is viable thanks to the dramatic advances in low noise and single photon counting achieved in the last decade by new scientific CMOS cameras as well as pixel sensors, like Timepix or MIMOSIS. In this contribution, we report the advances on the RIPTIDE concept: Geant4 Monte Carlo simulations, light collection tests as well as state-of-the-art approach to image readout, processing and fast analysis.
△ Less
Submitted 6 November, 2022; v1 submitted 31 October, 2022;
originally announced October 2022.
-
The CERN n TOF NEAR station for astrophysics- and application-related neutron activation measurements
Authors:
N. Patronis,
A. Mengoni,
N. Colonna,
M. Cecchetto,
C. Domingo-Pardo,
O. Aberle,
J. Lerendegui-Marco,
G. Gervino,
M. E. Stamati,
S. Goula,
A. P. Bernardes,
M. Mastromarco,
A. Manna,
R. Vlastou,
C. Massimi,
M. Calviani,
V. Alcayne,
S. Altieri,
S. Amaducci,
J. Andrzejewski,
V. Babiano-Suarez,
M. Bacak,
J. Balibrea,
C. Beltrami,
S. Bennett
, et al. (108 additional authors not shown)
Abstract:
A new experimental area, the NEAR station, has recently been built at the CERN n TOF facility, at a short distance from the spallation target (1.5 m). The new area, characterized by a neutron beam of very high flux, has been designed with the purpose of performing activation measurements of interest for astrophysics and various applications. The beam is transported from the spallation target to th…
▽ More
A new experimental area, the NEAR station, has recently been built at the CERN n TOF facility, at a short distance from the spallation target (1.5 m). The new area, characterized by a neutron beam of very high flux, has been designed with the purpose of performing activation measurements of interest for astrophysics and various applications. The beam is transported from the spallation target to the NEAR station through a hole in the shielding wall of the target, inside which a collimator is inserted. The new area is complemented with a γ-ray spectroscopy laboratory, the GEAR station, equipped with a high efficiency HPGe detector, for the measurement of the activity resulting from irradiation of a sample in the NEAR station. The use of a moderator/filter assembly is envisaged, in order to produce a neutron beam of Maxwellian shape at different thermal energies, necessary for the measurement of Maxwellian Averaged Cross Sections of astrophysical interest. A new fast-cycling activation technique is also being investigated, for measurements of reactions leading to isotopes of very short half life.
△ Less
Submitted 5 September, 2022;
originally announced September 2022.
-
The CaloCube calorimeter for high-energy cosmic-ray measurements in space: performance of a large-scale prototype
Authors:
O. Adriani,
A. Agnesi,
S. Albergo,
M. Antonelli,
L. Auditore,
A. Basti,
E. Berti,
G. Bigongiari,
L. Bonechi,
M. Bongi,
V. Bonvicini,
S. Bottai,
P. Brogi,
G. Castellini,
P. W. Cattaneo,
C. Checchia,
R. D Alessandro,
S. Detti,
M. Fasoli,
N. Finetti,
A. Italiano,
P. Maestro,
P. S. Marrocchesi,
N. Mori,
G. Orzan
, et al. (23 additional authors not shown)
Abstract:
The direct observation of high-energy cosmic rays, up to the PeV energy region, will increasingly rely on highly performing calorimeters, and the physics performance will be primarily determined by their geometrical acceptance and energy resolution. Thus, it is extremely important to optimize their geometrical design, granularity and absorption depth, with respect to the totalmass of the apparatus…
▽ More
The direct observation of high-energy cosmic rays, up to the PeV energy region, will increasingly rely on highly performing calorimeters, and the physics performance will be primarily determined by their geometrical acceptance and energy resolution. Thus, it is extremely important to optimize their geometrical design, granularity and absorption depth, with respect to the totalmass of the apparatus, which is amongst the most important constraints for a space mission. CaloCube is an homogeneous calorimeter whose basic geometry is cubic and isotropic, obtained by filling the cubic volume with small cubic scintillating crystals. In this way it is possible to detect particles arriving from every direction in space, thus maximizing the acceptance. This design summarizes a three-year R&D activity, aiming to both optimize and study the full-scale performance of the calorimeter, in the perspective of a cosmic-ray space mission, and investigate a viable technical design by means of the construction of several sizable prototypes. A large scale prototype, made of a mesh of 5x5x18 CsI(Tl) crystals, has been constructed and tested on high-energy particle beams at CERN SPS accelerator. In this paper we describe the CaloCube design and present the results relative to the response of the large scale prototype to electrons.
△ Less
Submitted 4 October, 2021;
originally announced October 2021.
-
RIPTIDE: a novel recoil-proton track imaging detector for fast neutrons
Authors:
Agatino Musumarra,
Franco Leone,
Cristian Massimi,
Maria Grazia Pellegriti,
Francesco Romano,
Roberto Spighi,
Mauro Villa
Abstract:
Neutron detectors are an essential tool for the development of many research fields, as nuclear, particle and astroparticle physics as well as radiotherapy and radiation safety. Since neutrons cannot directly ionize, their detection is only possible via nuclear reactions. Consequently, neutron-based experimental techniques are related to the detection of charged particle or electromagnetic radiati…
▽ More
Neutron detectors are an essential tool for the development of many research fields, as nuclear, particle and astroparticle physics as well as radiotherapy and radiation safety. Since neutrons cannot directly ionize, their detection is only possible via nuclear reactions. Consequently, neutron-based experimental techniques are related to the detection of charged particle or electromagnetic radiation originating from neutron-induced reactions. The study of fast neutrons is often based on the neutron-proton elastic scattering reaction. In this case, the ionization induced by the recoil protons in a hydrogenous material constitutes the basic information for the design and development of neutron detectors. Although experimental techniques have continuously improved and refined, so far, proton-recoil track imaging is still weak in laboratory rate environments because of the extremely small detection efficiency. To address this deficiency, we propose a novel recoil-proton track imaging system in which the light deriving from a fast scintillation signal is used to perform a complete reconstruction in space and time of the event. In particular, we report the idea of RIPTIDE (RecoIl Proton Track Imaging DEtector): an innovative system which combines a plastic scintillator coupled to imaging devices, based on CMOS technology, or Micro Channel Plate sensors. The proposed apparatus aims at providing neutron spectrometry capability by stereoscopically imaging the recoil-protons tracks, correlating the spatial information with the time information.
△ Less
Submitted 7 December, 2023; v1 submitted 23 September, 2021;
originally announced September 2021.
-
CaloCube: a novel calorimeter for high-energy cosmic rays in space
Authors:
P. W. Cattaneo,
O. Adriani,
S. Albergo,
L. Auditore,
A. Basti,
E. Berti,
G. Bigongiari,
L. Bonechi,
S. Bonechi,
M. Bongi,
V. Bonvicini,
S. Bottai,
P. Brogi,
G. Carotenuto,
G. Castellini,
R. ďAlessandro,
S. Detti,
M. Fasoli,
N. Finetti,
A. Italiano,
P. Lenzi,
P. Maestro,
P. S. Marrocchesi,
N. Mori,
M. Olmi
, et al. (21 additional authors not shown)
Abstract:
In order to extend the direct observation of high-energy cosmic rays up to the PeV region, highly performing calorimeters with large geometrical acceptance and high energy resolution are required. Within the constraint of the total mass of the apparatus, crucial for a space mission, the calorimeters must be optimized with respect to their geometrical acceptance, granularity and absorption depth. C…
▽ More
In order to extend the direct observation of high-energy cosmic rays up to the PeV region, highly performing calorimeters with large geometrical acceptance and high energy resolution are required. Within the constraint of the total mass of the apparatus, crucial for a space mission, the calorimeters must be optimized with respect to their geometrical acceptance, granularity and absorption depth. CaloCube is a homogeneous calorimeter with cubic geometry, to maximise the acceptance being sensitive to particles from every direction in space; granularity is obtained by relying on small cubic scintillating crystals as active elements. Different scintillating materials have been studied. The crystal sizes and spacing among them have been optimized with respect to the energy resolution. A prototype, based on CsI(Tl) cubic crystals, has been constructed and tested with particle beams. Some results of tests with different beams at CERN are presented.
△ Less
Submitted 23 May, 2017; v1 submitted 19 May, 2017;
originally announced May 2017.
-
The prototype detection unit of the KM3NeT detector
Authors:
KM3NeT Collaboration,
S. Adrián-Martínez,
M. Ageron,
F. Aharonian,
S. Aiello,
A. Albert,
F. Ameli,
E. G. Anassontzis,
G. C. Androulakis,
M. Anghinolfi,
G. Anton,
S. Anvar,
M. Ardid,
T. Avgitas,
K. Balasi,
H. Band,
G. Barbarino,
E. Barbarito,
F. Barbato,
B. Baret,
S. Baron,
J. Barrios,
A. Belias,
E. Berbee,
A. M. van den Berg
, et al. (224 additional authors not shown)
Abstract:
A prototype detection unit of the KM3NeT deep-sea neutrino telescope has been installed at 3500m depth 80km offshore the Italian coast. KM3NeT in its final configuration will contain several hundreds of detection units. Each detection unit is a mechanical structure anchored to the sea floor, held vertical by a submerged buoy and supporting optical modules for the detection of Cherenkov light emitt…
▽ More
A prototype detection unit of the KM3NeT deep-sea neutrino telescope has been installed at 3500m depth 80km offshore the Italian coast. KM3NeT in its final configuration will contain several hundreds of detection units. Each detection unit is a mechanical structure anchored to the sea floor, held vertical by a submerged buoy and supporting optical modules for the detection of Cherenkov light emitted by charged secondary particles emerging from neutrino interactions. This prototype string implements three optical modules with 31 photomultiplier tubes each. These optical modules were developed by the KM3NeT Collaboration to enhance the detection capability of neutrino interactions. The prototype detection unit was operated since its deployment in May 2014 until its decommissioning in July 2015. Reconstruction of the particle trajectories from the data requires a nanosecond accuracy in the time calibration. A procedure for relative time calibration of the photomultiplier tubes contained in each optical module is described. This procedure is based on the measured coincidences produced in the sea by the 40K background light and can easily be expanded to a detector with several thousands of optical modules. The time offsets between the different optical modules are obtained using LED nanobeacons mounted inside them. A set of data corresponding to 600 hours of livetime was analysed. The results show good agreement with Monte Carlo simulations of the expected optical background and the signal from atmospheric muons. An almost background-free sample of muons was selected by filtering the time correlated signals on all the three optical modules. The zenith angle of the selected muons was reconstructed with a precision of about 3°.
△ Less
Submitted 23 December, 2015; v1 submitted 6 October, 2015;
originally announced October 2015.
-
Long term monitoring of the optical background in the Capo Passero deep-sea site with the NEMO tower prototype
Authors:
S. Adrián-Martínez,
S. Aiello,
F. Ameli,
M. Anghinolfi,
M. Ardid,
G. Barbarino,
E. Barbarito,
F. C. T. Barbato,
N. Beverini,
S. Biagi,
A. Biagioni,
B. Bouhadef,
C. Bozza,
G. Cacopardo,
M. Calamai,
C. Calí,
D. Calvo,
A. Capone,
F. Caruso,
A. Ceres,
T. Chiarusi,
M. Circella,
R. Cocimano,
R. Coniglione,
M. Costa
, et al. (79 additional authors not shown)
Abstract:
The NEMO Phase-2 tower is the first detector which was operated underwater for more than one year at the "record" depth of 3500 m. It was designed and built within the framework of the NEMO (NEutrino Mediterranean Observatory) project. The 380 m high tower was successfully installed in March 2013 80 km offshore Capo Passero (Italy). This is the first prototype operated on the site where the italia…
▽ More
The NEMO Phase-2 tower is the first detector which was operated underwater for more than one year at the "record" depth of 3500 m. It was designed and built within the framework of the NEMO (NEutrino Mediterranean Observatory) project. The 380 m high tower was successfully installed in March 2013 80 km offshore Capo Passero (Italy). This is the first prototype operated on the site where the italian node of the KM3NeT neutrino telescope will be built. The installation and operation of the NEMO Phase-2 tower has proven the functionality of the infrastructure and the operability at 3500 m depth. A more than one year long monitoring of the deep water characteristics of the site has been also provided. In this paper the infrastructure and the tower structure and instrumentation are described. The results of long term optical background measurements are presented. The rates show stable and low baseline values, compatible with the contribution of 40K light emission, with a small percentage of light bursts due to bioluminescence. All these features confirm the stability and good optical properties of the site.
△ Less
Submitted 28 January, 2016; v1 submitted 17 July, 2015;
originally announced July 2015.
-
Measurement of the atmospheric muon depth intensity relation with the NEMO Phase-2 tower
Authors:
S. Aiello,
F. Ameli,
M. Anghinolfi,
G. Barbarino,
E. Barbarito,
F. Barbato,
N. Beverini,
S. Biagi,
B. Bouhadef,
C. Bozza,
G. Cacopardo,
M. Calamai,
C. Calì,
A. Capone,
F. Caruso,
A. Ceres,
T. Chiarusi,
M. Circella,
R. Cocimano,
R. Coniglione,
M. Costa,
G. Cuttone,
C. D'Amato,
A. D'Amico,
G. De Bonis
, et al. (68 additional authors not shown)
Abstract:
The results of the analysis of the data collected with the NEMO Phase-2 tower, deployed at 3500 m depth about 80 km off-shore Capo Passero (Italy), are presented. Cherenkov photons detected with the photomultipliers tubes were used to reconstruct the tracks of atmospheric muons. Their zenith-angle distribution was measured and the results compared with Monte Carlo simulations. An evaluation of the…
▽ More
The results of the analysis of the data collected with the NEMO Phase-2 tower, deployed at 3500 m depth about 80 km off-shore Capo Passero (Italy), are presented. Cherenkov photons detected with the photomultipliers tubes were used to reconstruct the tracks of atmospheric muons. Their zenith-angle distribution was measured and the results compared with Monte Carlo simulations. An evaluation of the systematic effects due to uncertainties on environmental and detector parameters is also included. The associated depth intensity relation was evaluated and compared with previous measurements and theoretical predictions. With the present analysis, the muon depth intensity relation has been measured up to 13 km of water equivalent.
△ Less
Submitted 3 December, 2014; v1 submitted 2 December, 2014;
originally announced December 2014.
-
Deep sea tests of a prototype of the KM3NeT digital optical module
Authors:
S. Adrián-Martínez,
M. Ageron,
F. Aharonian,
S. Aiello,
A. Albert,
F. Ameli,
E. G. Anassontzis,
M. Anghinolfi,
G. Anton,
S. Anvar,
M. Ardid,
R. de Asmundis,
K. Balasi,
H. Band,
G. Barbarino,
E. Barbarito,
F. Barbato,
B. Baret,
S. Baron,
A. Belias,
E. Berbee,
A. M. van den Berg,
A. Berkien,
V. Bertin,
S. Beurthey
, et al. (225 additional authors not shown)
Abstract:
The first prototype of a photo-detection unit of the future KM3NeT neutrino telescope has been deployed in the deep waters of the Mediterranean Sea. This digital optical module has a novel design with a very large photocathode area segmented by the use of 31 three inch photomultiplier tubes. It has been integrated in the ANTARES detector for in-situ testing and validation. This paper reports on th…
▽ More
The first prototype of a photo-detection unit of the future KM3NeT neutrino telescope has been deployed in the deep waters of the Mediterranean Sea. This digital optical module has a novel design with a very large photocathode area segmented by the use of 31 three inch photomultiplier tubes. It has been integrated in the ANTARES detector for in-situ testing and validation. This paper reports on the first months of data taking and rate measurements. The analysis results highlight the capabilities of the new module design in terms of background suppression and signal recognition. The directionality of the optical module enables the recognition of multiple Cherenkov photons from the same $^{40}$K decay and the localization bioluminescent activity in the neighbourhood. The single unit can cleanly identify atmospheric muons and provide sensitivity to the muon arrival directions.
△ Less
Submitted 16 May, 2014; v1 submitted 5 May, 2014;
originally announced May 2014.
