-
Modeling and optimization of radiative cooling based thermoelectric generators
Authors:
Bin Zhao,
Gang Pei,
Aaswath P. Raman
Abstract:
The possibility of night-time power generation has recently stimulated interest in using the radiative sky cooling mechanism with thermoelectric generators (TEG). These passive, low-temperature difference devices have been shown to generate electricity at night with no active input of heat needed, instead using the ambient air itself as the heat source. Here, we optimize both the geometry and oper…
▽ More
The possibility of night-time power generation has recently stimulated interest in using the radiative sky cooling mechanism with thermoelectric generators (TEG). These passive, low-temperature difference devices have been shown to generate electricity at night with no active input of heat needed, instead using the ambient air itself as the heat source. Here, we optimize both the geometry and operating conditions of radiative cooling driven thermoelectric (RC-TE) generators. We determine the optimal operating conditions, including maximum power point and maximum efficiency point, by develo** a combined thermal and electrical model. Our results show that the optimal operating condition results in larger power output than was previously expected. Moreover, we show that maximum power density occurs when the area ratio between cooler and P or N element reaches an optimal value. Finally, we perform a parametric study that takes account of environmental and structural parameters to improve the performance of the RC-TE device, including enhancing heat transfer between the hot surface and ambient air, suppressing the cooling loss of the radiative cooler, and optimizing the geometry of individual thermocouples. Our work identifies how to maximize the output of RC-TE devices and provides comprehensive guidance on making use of this new passive power generation method.
△ Less
Submitted 21 July, 2020;
originally announced August 2020.
-
Spectral self-adaptive absorber/emitter for harvesting energy from the sun and outer space
Authors:
Xianze Ao,
Bowen Li,
Bin Zhao,
Mingke Hu,
Hui Ren,
Honglun Yang,
Jie Liu,
**gyu Cao,
Junsheng Feng,
Yuanjun Yang,
Zeming Qi,
Liangbin Li,
Gang Pei,
Chongwen Zou
Abstract:
The sun (~6000 K) and outer space (~3 K) are the original heat source and sink for human beings on Earth. The energy applications of absorbing solar irradiation and harvesting the coldness of outer space for energy utilization have attracted considerable interest from researchers. However, combining these two functions in a static device for continuous energy harvesting is unachievable due to the…
▽ More
The sun (~6000 K) and outer space (~3 K) are the original heat source and sink for human beings on Earth. The energy applications of absorbing solar irradiation and harvesting the coldness of outer space for energy utilization have attracted considerable interest from researchers. However, combining these two functions in a static device for continuous energy harvesting is unachievable due to the intrinsic infrared spectral conflict. In this study, we developed spectral self-adaptive absorber/emitter (SSA/E) for daytime photothermal and nighttime radiative sky cooling modes depending on the phase transition of the vanadium dioxide coated layer. A 24-hour day-night test showed that the fabricated SSA/E has continuous energy harvesting ability and improved overall energy utilization performance, thus showing remarkable potential in future energy applications.
△ Less
Submitted 1 April, 2020;
originally announced April 2020.
-
The Compact Linear Collider (CLIC) - 2018 Summary Report
Authors:
The CLIC,
CLICdp collaborations,
:,
T. K. Charles,
P. J. Giansiracusa,
T. G. Lucas,
R. P. Rassool,
M. Volpi,
C. Balazs,
K. Afanaciev,
V. Makarenko,
A. Patapenka,
I. Zhuk,
C. Collette,
M. J. Boland,
A. C. Abusleme Hoffman,
M. A. Diaz,
F. Garay,
Y. Chi,
X. He,
G. Pei,
S. Pei,
G. Shu,
X. Wang,
J. Zhang
, et al. (671 additional authors not shown)
Abstract:
The Compact Linear Collider (CLIC) is a TeV-scale high-luminosity linear $e^+e^-$ collider under development at CERN. Following the CLIC conceptual design published in 2012, this report provides an overview of the CLIC project, its current status, and future developments. It presents the CLIC physics potential and reports on design, technology, and implementation aspects of the accelerator and the…
▽ More
The Compact Linear Collider (CLIC) is a TeV-scale high-luminosity linear $e^+e^-$ collider under development at CERN. Following the CLIC conceptual design published in 2012, this report provides an overview of the CLIC project, its current status, and future developments. It presents the CLIC physics potential and reports on design, technology, and implementation aspects of the accelerator and the detector. CLIC is foreseen to be built and operated in stages, at centre-of-mass energies of 380 GeV, 1.5 TeV and 3 TeV, respectively. CLIC uses a two-beam acceleration scheme, in which 12 GHz accelerating structures are powered via a high-current drive beam. For the first stage, an alternative with X-band klystron powering is also considered. CLIC accelerator optimisation, technical developments and system tests have resulted in an increased energy efficiency (power around 170 MW) for the 380 GeV stage, together with a reduced cost estimate at the level of 6 billion CHF. The detector concept has been refined using improved software tools. Significant progress has been made on detector technology developments for the tracking and calorimetry systems. A wide range of CLIC physics studies has been conducted, both through full detector simulations and parametric studies, together providing a broad overview of the CLIC physics potential. Each of the three energy stages adds cornerstones of the full CLIC physics programme, such as Higgs width and couplings, top-quark properties, Higgs self-coupling, direct searches, and many precision electroweak measurements. The interpretation of the combined results gives crucial and accurate insight into new physics, largely complementary to LHC and HL-LHC. The construction of the first CLIC energy stage could start by 2026. First beams would be available by 2035, marking the beginning of a broad CLIC physics programme spanning 25-30 years.
△ Less
Submitted 6 May, 2019; v1 submitted 14 December, 2018;
originally announced December 2018.
-
Light-by-Light Scattering in a Photon-Photon Collider
Authors:
T. Takahashi,
G. An,
Y. Chen,
W. Chou,
Y. Huang,
W. Liu,
W. Lu,
J. Lv,
G. Pei,
S. Pei,
C. P. Shen,
B. Sun,
C. Zhang,
C. Zhang
Abstract:
We studied the feasibility of observing light-by-light scattering in a photon-photon collider based on an existing accelerator complex and a commercially available laser system. We investigated the statistical significance of the signal over the QED backgrounds through a Monte Carlo simulation with a detector model. The study showed that light-by-light scattering can be observed with a statistical…
▽ More
We studied the feasibility of observing light-by-light scattering in a photon-photon collider based on an existing accelerator complex and a commercially available laser system. We investigated the statistical significance of the signal over the QED backgrounds through a Monte Carlo simulation with a detector model. The study showed that light-by-light scattering can be observed with a statistical significance of 8 to 10 sigma in a year of operation, depending on the operating conditions.
△ Less
Submitted 18 October, 2018; v1 submitted 29 June, 2018;
originally announced July 2018.
-
Updated baseline for a staged Compact Linear Collider
Authors:
The CLIC,
CLICdp collaborations,
:,
M. J. Boland,
U. Felzmann,
P. J. Giansiracusa,
T. G. Lucas,
R. P. Rassool,
C. Balazs,
T. K. Charles,
K. Afanaciev,
I. Emeliantchik,
A. Ignatenko,
V. Makarenko,
N. Shumeiko,
A. Patapenka,
I. Zhuk,
A. C. Abusleme Hoffman,
M. A. Diaz Gutierrez,
M. Vogel Gonzalez,
Y. Chi,
X. He,
G. Pei,
S. Pei,
G. Shu
, et al. (493 additional authors not shown)
Abstract:
The Compact Linear Collider (CLIC) is a multi-TeV high-luminosity linear e+e- collider under development. For an optimal exploitation of its physics potential, CLIC is foreseen to be built and operated in a staged approach with three centre-of-mass energy stages ranging from a few hundred GeV up to 3 TeV. The first stage will focus on precision Standard Model physics, in particular Higgs and top-q…
▽ More
The Compact Linear Collider (CLIC) is a multi-TeV high-luminosity linear e+e- collider under development. For an optimal exploitation of its physics potential, CLIC is foreseen to be built and operated in a staged approach with three centre-of-mass energy stages ranging from a few hundred GeV up to 3 TeV. The first stage will focus on precision Standard Model physics, in particular Higgs and top-quark measurements. Subsequent stages will focus on measurements of rare Higgs processes, as well as searches for new physics processes and precision measurements of new states, e.g. states previously discovered at LHC or at CLIC itself. In the 2012 CLIC Conceptual Design Report, a fully optimised 3 TeV collider was presented, while the proposed lower energy stages were not studied to the same level of detail. This report presents an updated baseline staging scenario for CLIC. The scenario is the result of a comprehensive study addressing the performance, cost and power of the CLIC accelerator complex as a function of centre-of-mass energy and it targets optimal physics output based on the current physics landscape. The optimised staging scenario foresees three main centre-of-mass energy stages at 380 GeV, 1.5 TeV and 3 TeV for a full CLIC programme spanning 22 years. For the first stage, an alternative to the CLIC drive beam scheme is presented in which the main linac power is produced using X-band klystrons.
△ Less
Submitted 27 March, 2017; v1 submitted 26 August, 2016;
originally announced August 2016.
-
A conventional positron source for International Linear Collider
Authors:
Tsunehiko Omori,
Tohru Takahashi,
Sabine Riemann,
Wei Gai,
Jie Gao,
Shin-ichi Kawada,
Wanming Liu,
Natsuki Okuda,
Guoxi Pei,
Junji Urakawa,
Andriy Ushakov
Abstract:
A possible solution to realize a conventional positron source driven by a several-GeV electron beam for the International Linear Collider is proposed. A 300 Hz electron linac is employed to create positrons with stretching pulse length in order to cure target thermal load. ILC requires about 2600 bunches in a train which pulse length is 1 ms. Each pulse of the 300 Hz linac creates about 130 bunche…
▽ More
A possible solution to realize a conventional positron source driven by a several-GeV electron beam for the International Linear Collider is proposed. A 300 Hz electron linac is employed to create positrons with stretching pulse length in order to cure target thermal load. ILC requires about 2600 bunches in a train which pulse length is 1 ms. Each pulse of the 300 Hz linac creates about 130 bunches, then 2600 bunches are created in 63 ms. Optimized parameters such as drive beam energy, beam size, and target thickness, are discussed assuming a L-band capture system to maximize the capture efficiency and to mitigate the target thermal load. A slow rotating tungsten disk is employed as positron generation target.
△ Less
Submitted 29 November, 2011; v1 submitted 7 October, 2011;
originally announced October 2011.
-
Photon generation by laser-Compton scattering at the KEK-ATF
Authors:
Shuhei Miyoshi,
Tomoya Akagi,
Sakae Araki,
Yoshisato Funahashi,
Tachishige Hirose,
Yosuke Honda,
Masao Kuriki,
Xiao Li,
Toshiyuki Okugi,
Tsunehiko Omori,
Guoxi Pei,
Kazuyuki Sakaue,
Hirotaka Shimizu,
Tohru Takahashi,
Nobuhiro Terunuma,
Junji Urakawa,
Yasuaki Ushio,
Masakazu Washio
Abstract:
We performed a photon generation experiment by laser-Compton scattering at the KEK-ATF, aiming to develop a Compton based polarized positron source for linear colliders. In the experiment, laser pulses with a 357 MHz repetition rate were accumulated and their power was enhanced by up to 250 times in the Fabry-Perot optical resonant cavity. We succeeded in synchronizing the laser pulses and colli…
▽ More
We performed a photon generation experiment by laser-Compton scattering at the KEK-ATF, aiming to develop a Compton based polarized positron source for linear colliders. In the experiment, laser pulses with a 357 MHz repetition rate were accumulated and their power was enhanced by up to 250 times in the Fabry-Perot optical resonant cavity. We succeeded in synchronizing the laser pulses and colliding them with the 1.3 GeV electron beam in the ATF ring while maintaining the laser pulse accumulation in the cavity. As a result, we observed 26.0 +/- 0.1 photons per electron-laser pulse crossing, which corresponds to a yield of 10^8 photons in a second.
△ Less
Submitted 18 February, 2010;
originally announced February 2010.