Showing 1–50 of 265 results for author: Park, H

Projected background and sensitivity of AMoRE-II

Authors: A. Agrawal, V. V. Alenkov, P. Aryal, J. Beyer, B. Bhandari, R. S. Boiko, K. Boonin, O. Buzanov, C. R. Byeon, N. Chanthima, M. K. Cheoun, J. S. Choe, Seonho Choi, S. Choudhury, J. S. Chung, F. A. Danevich, M. Djamal, D. Drung, C. Enss, A. Fleischmann, A. M. Gangapshev, L. Gastaldo, Y. M. Gavrilyuk, A. M. Gezhaev, O. Gileva , et al. (81 additional authors not shown)

Abstract: AMoRE-II aims to search for neutrinoless double beta decay with an array of 423 Li$_2$$^{100}$MoO$_4$ crystals operating in the cryogenic system as the main phase of the Advanced Molybdenum-based Rare process Experiment (AMoRE). AMoRE has been planned to operate in three phases: AMoRE-pilot, AMoRE-I, and AMoRE-II. AMoRE-II is currently being installed at the Yemi Underground Laboratory, located ap… ▽ More AMoRE-II aims to search for neutrinoless double beta decay with an array of 423 Li$_2$$^{100}$MoO$_4$ crystals operating in the cryogenic system as the main phase of the Advanced Molybdenum-based Rare process Experiment (AMoRE). AMoRE has been planned to operate in three phases: AMoRE-pilot, AMoRE-I, and AMoRE-II. AMoRE-II is currently being installed at the Yemi Underground Laboratory, located approximately 1000 meters deep in Jeongseon, Korea. The goal of AMoRE-II is to reach up to $T^{0νββ}_{1/2}$ $\sim$ 6 $\times$ 10$^{26}$ years, corresponding to an effective Majorana mass of 15 - 29 meV, covering all the inverted mass hierarchy regions. To achieve this, the background level of the experimental configurations and possible background sources of gamma and beta events should be well understood. We have intensively performed Monte Carlo simulations using the GEANT4 toolkit in all the experimental configurations with potential sources. We report the estimated background level that meets the 10$^{-4}$counts/(keV$\cdot$kg$\cdot$yr) requirement for AMoRE-II in the region of interest (ROI) and show the projected half-life sensitivity based on the simulation study. △ Less

Submitted 13 June, 2024; originally announced June 2024.

Computational Supremacy of Quantum Eigensolver by Extension of Optimized Binary Configurations

Authors: Hayun Park, Hunpyo Lee

Abstract: We developed a quantum eigensolver (QE) which is based on an extension of optimized binary configurations measured by quantum annealing (QA) on a D-Wave Quantum Annealer (D-Wave QA). This approach performs iterative QA measurements to optimize the eigenstates $\vert ψ\rangle$ without the derivation of a classical computer. The computational cost is $ηM L$ for full eigenvalues $E$ and… ▽ More We developed a quantum eigensolver (QE) which is based on an extension of optimized binary configurations measured by quantum annealing (QA) on a D-Wave Quantum Annealer (D-Wave QA). This approach performs iterative QA measurements to optimize the eigenstates $\vert ψ\rangle$ without the derivation of a classical computer. The computational cost is $ηM L$ for full eigenvalues $E$ and $\vert ψ\rangle$ of the Hamiltonian $\hat{H}$ of size $L \times L$, where $M$ and $η$ are the number of QA measurements required to reach the converged $\vert ψ\rangle$ and the total annealing time of many QA shots, respectively. Unlike the exact diagonalized (ED) algorithm with $L^3$ iterations on a classical computer, the computation cost is not significantly affected by $L$ and $M$ because $η$ represents a very short time within $10^{-2}$ seconds on the D-Wave QA. We selected the tight-binding $\hat{H}$ that contains the exact $E$ values of all energy states in two systems with metallic and insulating phases. We confirmed that the proposed QE algorithm provides exact solutions within the errors of $5 \times 10^{-3}$. The QE algorithm will not only show computational supremacy over the ED approach on a classical computer but will also be widely used for various applications such as material and drug design. △ Less

Submitted 5 June, 2024; originally announced June 2024.

Comments: 5 pages and 4 figures

Determination of Optimal Chain Coupling made by Embedding in D-Wave Quantum Annealer

Authors: Hayun Park, Hunpyo Lee

Abstract: The qubits in a D-wave quantum annealer (D-wave QA) are designed on a Pegasus graph that is different from structure of a combinatorial optimization problem. This situation requires embedding with the chains connected by ferromagnetic (FM) coupling $J_c$ between the qubits. Weak and strong $J_c$ values induce chain breaking and enforcement of chain energy, which reduce the accuracy of quantum anne… ▽ More The qubits in a D-wave quantum annealer (D-wave QA) are designed on a Pegasus graph that is different from structure of a combinatorial optimization problem. This situation requires embedding with the chains connected by ferromagnetic (FM) coupling $J_c$ between the qubits. Weak and strong $J_c$ values induce chain breaking and enforcement of chain energy, which reduce the accuracy of quantum annealing (QA) measurements, respectively. In addition, we confirmed that even though the D-Wave Ocean package provides a default coupling $J_c^{\text{default}}$, it is not an optimal coupling $J_c^{\text{optimal}}$ that maximizes the possible correct rate of QA measurements. In this paper, we present an algorithm how $J_c^{\text{optimal}}$ with the maximum probability $p$ for observing the possible lowest energy is determined. Finally, we confirm that the extracted $J_c^{\text{optimal}}$ show much better $p$ than $J_c^{\text{default}}$ in QA measurements of various parameters of frustrated and fully connected combinatorial optimization problems. The open code is available in \textit{https://github.com/HunpyoLee/OptimizeChainStrength}. △ Less

Submitted 5 June, 2024; originally announced June 2024.

Comments: 5 pages, 6 figures

Diamond molecular balance: Revolutionizing high-resolution mass spectrometry from MDa to TDa at room temperature

Authors: Donggeun Lee, Seung-Woo Jeon, Chang-Hwan Yi, Yang-Hee Kim, Yeeun Choi, Sang-Hun Lee, **woong Cha, Seung-Bo Shim, Junho Suh, Il-Young Kim, Dongyeon Daniel Kang, Hojoong Jung, Cherlhyun Jeong, Jae-pyoung Ahn, Hee Chul Park, Sang-Wook Han, Chulki Kim

Abstract: The significance of mass spectrometry lies in its unparalleled ability to accurately identify and quantify molecules in complex samples, providing invaluable insights into molecular structures and interactions. Here, we leverage diamond nanostructures as highly sensitive mass sensors by utilizing a self-excitation mechanism under an electron beam in a conventional scanning electron microscope (SEM… ▽ More The significance of mass spectrometry lies in its unparalleled ability to accurately identify and quantify molecules in complex samples, providing invaluable insights into molecular structures and interactions. Here, we leverage diamond nanostructures as highly sensitive mass sensors by utilizing a self-excitation mechanism under an electron beam in a conventional scanning electron microscope (SEM). The diamond molecular balance (DMB) exhibits exceptional mass resolution of a few MDa and an extensive dynamic range from MDa to TDa, positioning itself as a forefront molecular balance operating at room temperature. Notably, the DMB measures the mass of a single bacteriophage T4, achieving a mass resolution of 4.7 MDa for an analyte at 184 MDa, while precisely determining their positional information on the device. These findings highlight the groundbreaking potential of the DMB as a revolutionary tool for mass analysis at room temperature. △ Less

Submitted 6 June, 2024; v1 submitted 4 June, 2024; originally announced June 2024.

Comments: 15 pages, 4 figures

Characterization of a graphene-hBN superlattice field effect transistor

Authors: Won Beom Choi, Youngoh Son, Hangyeol Park, Yungi Jeong, Junhyeok Oh, K. Watanabe, T. Taniguchi, Joonho Jang

Abstract: Graphene is a unique platform to naturally host a high quality 2D electron system. With hBN encapsulation to protect the graphene from the noisy environment, it has a potential to realize ultrahigh performance nanodevices, such as photodiodes and transistors. However, absence of a band gap at Dirac point poses challenges in using the system as a useful transistor. In this study, we investigate the… ▽ More Graphene is a unique platform to naturally host a high quality 2D electron system. With hBN encapsulation to protect the graphene from the noisy environment, it has a potential to realize ultrahigh performance nanodevices, such as photodiodes and transistors. However, absence of a band gap at Dirac point poses challenges in using the system as a useful transistor. In this study, we investigate the functionality of a hBN-aligned monolayer graphene as a field effect transistor (FET). By precisely aligning the hBN and graphene, the band gaps open at the first Dirac point and at the hole-doped induced Dirac point via an interfacial moire potential. To characterize as a submicron scale FET, we fabricated a global bottom gate to tune the density of a conducting channel and a local top gate to switch-off the channel, demonstrating that this system can be tuned at an optimal on/off ratio regime by controlling the gates separately. These findings will present a useful reference point for further development of the FETs based on graphene heterostructures. △ Less

Submitted 10 May, 2024; originally announced May 2024.

Spontaneous emission decay and excitation in photonic temporal crystals

Authors: Jagang Park, Kyungmin Lee, Ruo-Yang Zhang, Hee-Chul Park, Jung-Wan Ryu, Gil Young Cho, Min Yeul Lee, Zhaoqing Zhang, Namkyoo Park, Wonju Jeon, Jonghwa Shin, C. T. Chan, Bumki Min

Abstract: Over the last few decades, the prominent strategies for controlling spontaneous emission has been the use of resonant or space-periodic photonic structures. This approach, initially articulated by Purcell and later expanded upon by Yablonovitch in the context of photonic crystals, leverages the spatial surroundings to modify the spontaneous emission decay rate of atoms or quantum emitters. However… ▽ More Over the last few decades, the prominent strategies for controlling spontaneous emission has been the use of resonant or space-periodic photonic structures. This approach, initially articulated by Purcell and later expanded upon by Yablonovitch in the context of photonic crystals, leverages the spatial surroundings to modify the spontaneous emission decay rate of atoms or quantum emitters. However, the rise of time-varying photonics has compelled a reevaluation of the spontaneous emission process within dynamically changing environments, especially concerning photonic temporal crystals where optical properties undergo time-periodic modulation. Here, we apply classical light-matter interaction theory along with Floquet analysis to reveal a substantial enhancement in the spontaneous emission decay rate at the momentum gap frequency in photonic temporal crystals. This enhancement is attributed to time-periodicity-induced loss and gain mechanisms, as well as the non-orthogonality of Floquet eigenstates that are inherent to photonic temporal crystals. Intriguingly, our findings also suggest that photonic temporal crystals enable the spontaneous excitation of an atom from its ground state to an excited state, accompanied by the concurrent emission of a photon. △ Less

Submitted 20 April, 2024; originally announced April 2024.

Machine Learning-Guided Design of Non-Reciprocal and Asymmetric Elastic Chiral Metamaterials

Authors: Lingxiao Yuan, Emma Lejeune, Harold S. Park

Abstract: There has been significant recent interest in the mechanics community to design structures that can either violate reciprocity, or exhibit elastic asymmetry or odd elasticity. While these properties are highly desirable to enable mechanical metamaterials to exhibit novel wave propagation phenomena, it remains an open question as to how to design passive structures that exhibit both significant non… ▽ More There has been significant recent interest in the mechanics community to design structures that can either violate reciprocity, or exhibit elastic asymmetry or odd elasticity. While these properties are highly desirable to enable mechanical metamaterials to exhibit novel wave propagation phenomena, it remains an open question as to how to design passive structures that exhibit both significant non-reciprocity and elastic asymmetry. In this paper, we first define several design spaces for chiral metamaterials leveraging specific design parameters, including the ligament contact angles, the ligament shape, and circle radius. Having defined the design spaces, we then leverage machine learning approaches, and specifically Bayesian optimization, to determine optimally performing designs within each design space satisfying maximal non-reciprocity or stiffness asymmetry. Finally, we perform multi-objective optimization by determining the Pareto optimum and find chiral metamaterials that simultaneously exhibit high non-reciprocity and stiffness asymmetry. Our analysis of the underlying mechanisms reveals that chiral metamaterials that can display multiple different contact states under loading in different directions are able to simultaneously exhibit both high non-reciprocity and stiffness asymmetry. Overall, this work demonstrates the effectiveness of employing ML to bring insights to a novel domain with limited prior information, and more generally will pave the way for metamaterials with unique properties and functionality in directing and guiding mechanical wave energy. △ Less

Submitted 19 April, 2024; originally announced April 2024.

X-ray imaging and electron temperature evolution in laser-driven magnetic reconnection experiments at the National Ignition Facility

Authors: V. Valenzuela-Villaseca, J. M. Molina, D. B. Schaeffer, S. Malko, J. Griff-McMahon, K. Lezhnin, M. J. Rosenberg, S. X. Hu, D. Kalantar, C. Trosseille, H. -S. Park, B. A. Remington, G. Fiksel, D. Uzdensky, A. Bhattacharjee, W. Fox

Abstract: We present results from X-ray imaging of high-aspect-ratio magnetic reconnection experiments driven at the National Ignition Facility. Two parallel, self-magnetized, elongated laser-driven plumes are produced by tiling 40 laser beams. A magnetic reconnection layer is formed by the collision of the plumes. A gated X-ray framing pinhole camera with micro-channel plate (MCP) detector produces multipl… ▽ More We present results from X-ray imaging of high-aspect-ratio magnetic reconnection experiments driven at the National Ignition Facility. Two parallel, self-magnetized, elongated laser-driven plumes are produced by tiling 40 laser beams. A magnetic reconnection layer is formed by the collision of the plumes. A gated X-ray framing pinhole camera with micro-channel plate (MCP) detector produces multiple images through various filters of the formation and evolution of both the plumes and current sheet. As the diagnostic integrates plasma self-emission along the line of sight, 2-dimensional electron temperature maps $\langle T_e \rangle_Y$ are constructed by taking the ratio of intensity of these images obtained with different filters. The plumes have a characteristic temperature $\langle T_e \rangle_Y = 240 \pm 20$ eV at 2 ns after the initial laser irradiation and exhibit a slow cooling up to 4 ns. The reconnection layer forms at 3 ns with a temperature $\langle T_e \rangle_Y = 280 \pm 50$ eV as the result of the collision of the plumes. The error bars of the plumes and current sheet temperatures separate at $4$ ns, showing the heating of the current sheet from colder inflows. Using a semi-analytical model, we find that the observed heating of the current sheet is consistent with being produced by electron-ion drag, rather than the conversion of magnetic to kinetic energy. △ Less

Submitted 11 April, 2024; originally announced April 2024.

Comments: Submitted to Physics of Plasmas. 19 pages (total), 14 figures, 2 tables

Evaluation of the performance of the event reconstruction algorithms in the JSNS$^2$ experiment using a $^{252}$Cf calibration source

Authors: D. H. Lee, M. K. Cheoun, J. H. Choi, J. Y. Choi, T. Dodo, J. Goh, K. Haga, M. Harada, S. Hasegawa, W. Hwang, T. Iida, H. I. Jang, J. S. Jang, K. K. Joo, D. E. Jung, S. K. Kang, Y. Kasugai, T. Kawasaki, E. J. Kim, J. Y. Kim, S. B Kim, W. Kim, H. Kinoshita, T. Konno, I. T. Lim , et al. (28 additional authors not shown)

Abstract: JSNS$^2$ searches for short baseline neutrino oscillations with a baseline of 24~meters and a target of 17~tonnes of the Gd-loaded liquid scintillator. The correct algorithm on the event reconstruction of events, which determines the position and energy of neutrino interactions in the detector, are essential for the physics analysis of the data from the experiment. Therefore, the performance of th… ▽ More JSNS$^2$ searches for short baseline neutrino oscillations with a baseline of 24~meters and a target of 17~tonnes of the Gd-loaded liquid scintillator. The correct algorithm on the event reconstruction of events, which determines the position and energy of neutrino interactions in the detector, are essential for the physics analysis of the data from the experiment. Therefore, the performance of the event reconstruction is carefully checked with calibrations using $^{252}$Cf source. This manuscript describes the methodology and the performance of the event reconstruction. △ Less

Submitted 5 April, 2024; originally announced April 2024.

Pulse Shape Discrimination in JSNS$^2$

Authors: T. Dodo, M. K. Cheoun, J. H. Choi, J. Y. Choi, J. Goh, K. Haga, M. Harada, S. Hasegawa, W. Hwang, T. Iida, H. I. Jang, J. S. Jang, K. K. Joo, D. E. Jung, S. K. Kang, Y. Kasugai, T. Kawasaki, E. J. Kim, J. Y. Kim, S. B. Kim, W. Kim, H. Kinoshita, T. Konno, D. H. Lee, I. T. Lim , et al. (29 additional authors not shown)

Abstract: JSNS$^2$ (J-PARC Sterile Neutrino Search at J-PARC Spallation Neutron Source) is an experiment that is searching for sterile neutrinos via the observation of $\barν_μ \rightarrow \barν_e$ appearance oscillations using neutrinos with muon decay-at-rest. For this search, rejecting cosmic-ray-induced neutron events by Pulse Shape Discrimination (PSD) is essential because the JSNS$^2$ detector is loca… ▽ More JSNS$^2$ (J-PARC Sterile Neutrino Search at J-PARC Spallation Neutron Source) is an experiment that is searching for sterile neutrinos via the observation of $\barν_μ \rightarrow \barν_e$ appearance oscillations using neutrinos with muon decay-at-rest. For this search, rejecting cosmic-ray-induced neutron events by Pulse Shape Discrimination (PSD) is essential because the JSNS$^2$ detector is located above ground, on the third floor of the building. We have achieved 95$\%$ rejection of neutron events while kee** 90$\%$ of signal, electron-like events using a data driven likelihood method. △ Less

Submitted 28 March, 2024; originally announced April 2024.

Comments: arXiv admin note: text overlap with arXiv:2111.07482, arXiv:2308.02722

An inversion problem for optical spectrum data via physics-guided machine learning

Authors: Hwiwoo Park, Jun H. Park, Jungseek Hwang

Abstract: We propose the regularized recurrent inference machine (rRIM), a novel machine-learning approach to solve the challenging problem of deriving the pairing glue function from measured optical spectra. The rRIM incorporates physical principles into both training and inference and affords noise robustness, flexibility with out-of-distribution data, and reduced data requirements. It effectively obtains… ▽ More We propose the regularized recurrent inference machine (rRIM), a novel machine-learning approach to solve the challenging problem of deriving the pairing glue function from measured optical spectra. The rRIM incorporates physical principles into both training and inference and affords noise robustness, flexibility with out-of-distribution data, and reduced data requirements. It effectively obtains reliable pairing glue functions from experimental optical spectra and yields promising solutions for similar inverse problems of the Fredholm integral equation of the first kind. △ Less

Submitted 2 April, 2024; originally announced April 2024.

Comments: 19 pages, 4 figures

Achieving Optical Refractive Index of 10-Plus by Colloidal Self-Assembly

Authors: NaYeoun Kim, Ji-Hyeok Huh, YongDeok Cho, Sung Hun Park, Hyeon Ho Kim, Kyung Hun Rho, Jaewon Lee, Seungwoo Lee

Abstract: This study demonstrates the developments of self-assembled optical metasurfaces to overcome inherent limitations in polarization density (P) within natural materials, which hinder achieving high refractive indices (n) at optical frequencies. The Maxwellian macroscopic description establishes a link between P and n, revealing a static limit in natural materials, restricting n to approximately 4.0 a… ▽ More This study demonstrates the developments of self-assembled optical metasurfaces to overcome inherent limitations in polarization density (P) within natural materials, which hinder achieving high refractive indices (n) at optical frequencies. The Maxwellian macroscopic description establishes a link between P and n, revealing a static limit in natural materials, restricting n to approximately 4.0 at optical frequencies. Optical metasurfaces, utilizing metallic colloids on a deep-subwavelength scale, offer a solution by unnaturally enhancing n through electric dipolar (ED) resonances. Self-assembly enables the creation of nanometer-scale metallic gaps between metallic nanoparticles (NPs), paving the way for achieving exceptionally high n at optical frequencies. This study focuses on assembling polyhedral gold (Au) NPs into a closely packed monolayer by rationally designing the polymeric ligand to balance attractive and repulsive forces, in that polymeric brush-mediated self-assembly of the close-packed Au NP monolayer is robustly achieved over a large-area. The resulting monolayer of Au nanospheres (NSs), nanooctahedras (NOs), and nanocubes (NCs) exhibits high macroscopic integrity and crystallinity, sufficiently enough for pushing n to record-high regimes. The study underlies the significance of capacitive coupling in achieving an unnaturally high n and explores fine-tuning Au NC size to optimize this coupling. The achieved n of 10.12 at optical frequencies stands as a benchmark, highlighting the potential of polyhedral Au NPs in advancing optical metasurfaces. △ Less

Submitted 25 March, 2024; originally announced March 2024.

Incorporating Heterogeneous Interactions for Ecological Biodiversity

Authors: Jong Il Park, Deok-Sun Lee, Sang Hoon Lee, Hye ** Park

Abstract: Understanding the behaviors of ecological systems is challenging given their multi-faceted complexity. To proceed, theoretical models such as Lotka-Volterra dynamics with random interactions have been investigated by the dynamical mean-field theory to provide insights into underlying principles such as how biodiversity and stability depend on the randomness in interaction strength. Yet the fully-c… ▽ More Understanding the behaviors of ecological systems is challenging given their multi-faceted complexity. To proceed, theoretical models such as Lotka-Volterra dynamics with random interactions have been investigated by the dynamical mean-field theory to provide insights into underlying principles such as how biodiversity and stability depend on the randomness in interaction strength. Yet the fully-connected structure assumed in these previous studies is not realistic as revealed by a vast amount of empirical data. We derive a generic formula for the abundance distribution under an arbitrary distribution of degree, the number of interacting neighbors, which leads to degree-dependent abundance patterns of species. Notably, in contrast to the well-mixed system, the number of surviving species can be reduced as the community becomes cooperative in heterogeneous interaction structures. Our study, therefore, demonstrates that properly taking into account heterogeneity in the interspecific interaction structure is indispensable to understanding the diversity in large ecosystems, and our general theoretical framework can apply to a much wider range of interacting many-body systems. △ Less

Submitted 23 March, 2024; originally announced March 2024.

Measurements of low energy nuclear recoil quenching factors for Na and I recoils in the NaI(Tl) scintillator

Authors: S. H. Lee, H. W. Joo, H. J. Kim, K. W. Kim, S. K. Kim, Y. D. Kim, Y. J. Ko, H. S. Lee, J. Y. Lee, H. S. Park, Y. S. Yoon

Abstract: Elastic scattering off nuclei in target detectors, involving interactions with dark matter and coherent elastic neutrino nuclear recoil (CE$ν$NS), results in the deposition of low energy within the nuclei, dissipating rapidly through a combination of heat and ionization. The primary energy loss mechanism for nuclear recoil is heat, leading to consistently smaller measurable scintillation signals c… ▽ More Elastic scattering off nuclei in target detectors, involving interactions with dark matter and coherent elastic neutrino nuclear recoil (CE$ν$NS), results in the deposition of low energy within the nuclei, dissipating rapidly through a combination of heat and ionization. The primary energy loss mechanism for nuclear recoil is heat, leading to consistently smaller measurable scintillation signals compared to electron recoils of the same energy. The nuclear recoil quenching factor (QF), representing the ratio of scintillation light yield produced by nuclear recoil to that of electron recoil at the same energy, is a critical parameter for understanding dark matter and neutrino interactions with nuclei. The low energy QF of NaI(Tl) crystals, commonly employed in dark matter searches and CE$ν$NS measurements, is of substantial importance. Previous low energy QF measurements were constrained by contamination from photomultiplier tube (PMT)-induced noise, resulting in an observed light yield of approximately 15 photoelectrons per keVee (kilo-electron-volt electron-equivalent energy) and nuclear recoil energy above 5 keVnr (kilo-electron-volt nuclear recoil energy). Through enhanced crystal encapsulation, an increased light yield of around 26 photoelectrons per keVee is achieved. This improvement enables the measurement of the nuclear recoil QF for sodium nuclei at an energy of 3.8 $\pm$ 0.6 keVnr with a QF of 11.2 $\pm$ 1.7%. Furthermore, a reevaluation of previously reported QF results is conducted, incorporating enhancements in low energy events based on waveform simulation. The outcomes are generally consistent with various recent QF measurements for sodium and iodine. △ Less

Submitted 28 February, 2024; v1 submitted 23 February, 2024; originally announced February 2024.

Construction of Yemilab

Authors: K. S. Park, Y. D. Kim, K. M. Bang, H. K Park, M. H. Lee, J. H. Jang, J. H. Kim, J. So, S. H. Kim, S. B. Kim

Abstract: The Center for Underground Physics of the Institute for Basic Science (IBS) in Korea has been planning the construction of a deep underground laboratory since 2013 to search for extremely rare interactions such as dark matter and neutrinos. In September 2022, a new underground laboratory, Yemilab, was finally completed in Jeongseon, Gangwon Province, with a depth of 1,000 m and an exclusive experi… ▽ More The Center for Underground Physics of the Institute for Basic Science (IBS) in Korea has been planning the construction of a deep underground laboratory since 2013 to search for extremely rare interactions such as dark matter and neutrinos. In September 2022, a new underground laboratory, Yemilab, was finally completed in Jeongseon, Gangwon Province, with a depth of 1,000 m and an exclusive experimental area spanning 3,000 m$^3$. The tunnel is encased in limestone and accommodates 17 independent experimental spaces. Over two years, from 2023 to 2024, the Yangyang Underground Laboratory facilities will be relocated to Yemilab. Preparations are underway for the AMoRE-II, a neutrinoless double beta decay experiment, scheduled to begin in Q2 2024 at Yemilab. Additionally, Yemilab includes a cylindrical pit with a volume of approximately 6,300 m$^3$, designed as a multipurpose laboratory for next-generation experiments involving neutrinos, dark matter, and related research. This article provides a focused overview of the construction and structure of Yemilab. △ Less

Submitted 21 February, 2024; originally announced February 2024.

Comments: 12 pages, 3 figures, 1 table

Journal ref: Frontiers in Physics, vol. 12, 1323991 (2024)

Latest Development of Electropolishing Optimization for 650 MHz Niobium Cavity

Authors: V. Chouhan, D. Bice, D. Burk, S. Chandrasekaran, A. Cravatta, P. Dubiel, G. V. Eremeev, F. Furuta, O. Melnychuk, A. Netepenko, M. K. Ng, J. Ozelis, H. Park, T. Ring, G. Wu, B. Guilfoyle, M. P. Kelly, T. Reid

Abstract: Electropolishing (EP) of 1.3 GHz niobium superconducting RF cavities is conducted to achieve a desired smooth and contaminant-free surface that yields good RF performance. Achieving a smooth surface of a large-sized elliptical cavity with the standard EP conditions was found to be challenging. This work aimed to conduct a systematic parametric EP study to understand the effects of various EP param… ▽ More Electropolishing (EP) of 1.3 GHz niobium superconducting RF cavities is conducted to achieve a desired smooth and contaminant-free surface that yields good RF performance. Achieving a smooth surface of a large-sized elliptical cavity with the standard EP conditions was found to be challenging. This work aimed to conduct a systematic parametric EP study to understand the effects of various EP parameters on the surface of 650 MHz niobium cavities used in the Proton Improvement Plan-II (PIP-II) linear accelerator. Parameters optimized in this study provided a smooth surface of the cavities. The electropolished cavity showed significantly a higher accelerating gradient meeting baseline requirement and qualified for further surface treatment to improve the cavity quality factor. △ Less

Submitted 26 January, 2024; originally announced January 2024.

Comments: SRF2023

Report number: FERMILAB-CONF-23-274-TD

Nonproportionality of NaI(Tl) Scintillation Detector for Dark Matter Search Experiments

Authors: S. M. Lee, G. Adhikari, N. Carlin, J. Y. Cho, J. J. Choi, S. Choi, A. C. Ezeribe, L. E. Fran. a, C. Ha, I. S. Hahn, S. J. Hollick, E. J. Jeon, H. W. Joo, W. G. Kang, M. Kauer, B. H. Kim, H. J. Kim, J. Kim, K. W. Kim, S. H. Kim, S. K. Kim, S. W. Kim, W. K. Kim, Y. D. Kim, Y. H. Kim , et al. (37 additional authors not shown)

Abstract: We present a comprehensive study of the nonproportionality of NaI(Tl) scintillation detectors within the context of dark matter search experiments. Our investigation, which integrates COSINE-100 data with supplementary $γ$ spectroscopy, measures light yields across diverse energy levels from full-energy $γ$ peaks produced by the decays of various isotopes. These $γ$ peaks of interest were produced… ▽ More We present a comprehensive study of the nonproportionality of NaI(Tl) scintillation detectors within the context of dark matter search experiments. Our investigation, which integrates COSINE-100 data with supplementary $γ$ spectroscopy, measures light yields across diverse energy levels from full-energy $γ$ peaks produced by the decays of various isotopes. These $γ$ peaks of interest were produced by decays supported by both long and short-lived isotopes. Analyzing peaks from decays supported only by short-lived isotopes presented a unique challenge due to their limited statistics and overlap** energies, which was overcome by long-term data collection and a time-dependent analysis. A key achievement is the direct measurement of the 0.87 keV light yield, resulting from the cascade following electron capture decay of $^{22}$Na from internal contamination. This measurement, previously accessible only indirectly, deepens our understanding of NaI(Tl) scintillator behavior in the region of interest for dark matter searches. This study holds substantial implications for background modeling and the interpretation of dark matter signals in NaI(Tl) experiments. △ Less

Submitted 10 May, 2024; v1 submitted 14 January, 2024; originally announced January 2024.

Comments: 12 pages, 7 figures

Journal ref: Eur. Phys. J. C 84 (2024) 484

Segment-Based Wall Treatment Model for Heat Transfer Rate in Smoothed Particle Hydrodynamics

Authors: Hyung-Jun Park, Jaekwang Kim, Hyo** Kim

Abstract: In this study, a smoothed particle hydrodynamics (SPH) model that applies a segment-based boundary treatment is used to simulate natural convection. In a natural convection simulated using an SPH model, the wall boundary treatment is a major issue because accurate heat transfer from boundaries should be calculated. The boundary particle method, which models the boundary by placing multiple layers… ▽ More In this study, a smoothed particle hydrodynamics (SPH) model that applies a segment-based boundary treatment is used to simulate natural convection. In a natural convection simulated using an SPH model, the wall boundary treatment is a major issue because accurate heat transfer from boundaries should be calculated. The boundary particle method, which models the boundary by placing multiple layers of particles on and behind the wall boundary, is the most widely used boundary treatment method. Although this method can impose accurate boundary conditions, boundary modeling for complex shapes is challenging and requires excessive computational costs depending on the boundary shape. In this study, we utilize a segment-based boundary treatment method to model the wall boundary and apply this method to the energy conservation equation for the wall heat transfer model. The proposed method solves the problems arising from the use of boundary particles and simultaneously provides accurate heat transfer calculation results for the wall. In various numerical examples, the proposed method is verified through a comparison with available experimental results, SPH results using the boundary particle method, and finite volume method (FVM) results. △ Less

Submitted 24 November, 2023; originally announced November 2023.

Performance of the electromagnetic and hadronic prototype segments of the ALICE Forward Calorimeter

Authors: M. Aehle, J. Alme, C. Arata, I. Arsene, I. Bearden, T. Bodova, V. Borshchov, O. Bourrion, M. Bregant, A. van den Brink, V. Buchakchiev, A. Buhl, T. Chujo, L. Dufke, V. Eikeland, M. Fasel, N. Gauger, A. Gautam, A. Ghimouz, Y. Goto, R. Guernane, T. Hachiya, H. Hassan, L. He, H. Helstrup , et al. (50 additional authors not shown)

Abstract: We present the performance of a full-length prototype of the ALICE Forward Calorimeter (FoCal). The detector is composed of a silicon-tungsten electromagnetic sampling calorimeter with longitudinal and transverse segmentation (FoCal-E) of about 20$X_0$ and a hadronic copper-scintillating-fiber calorimeter (FoCal-H) of about 5$λ_{\rm int}$. The data were taken between 2021 and 2023 at the CERN PS a… ▽ More We present the performance of a full-length prototype of the ALICE Forward Calorimeter (FoCal). The detector is composed of a silicon-tungsten electromagnetic sampling calorimeter with longitudinal and transverse segmentation (FoCal-E) of about 20$X_0$ and a hadronic copper-scintillating-fiber calorimeter (FoCal-H) of about 5$λ_{\rm int}$. The data were taken between 2021 and 2023 at the CERN PS and SPS beam lines with hadron (electron) beams up to energies of 350 (300) GeV. Regarding FoCal-E, we report a comprehensive analysis of its response to minimum ionizing particles across all pad layers. The longitudinal shower profile of electromagnetic showers is measured with a layer-wise segmentation of 1$X_0$. As a projection to the performance of the final detector in electromagnetic showers, we demonstrate linearity in the full energy range, and show that the energy resolution fulfills the requirements for the physics needs. Additionally, the performance to separate two-showers events was studied by quantifying the transverse shower width. Regarding FoCal-H, we report a detailed analysis of the response to hadron beams between 60 and 350 GeV. The results are compared to simulations obtained with a Geant4 model of the test beam setup, which in particular for FoCal-E are in good agreement with the data. The energy resolution of FoCal-E was found to be lower than 3% at energies larger than 100 GeV. The response of FoCal-H to hadron beams was found to be linear, albeit with a significant intercept that is about factor 2 larger than in simulations. Its resolution, which is non-Gaussian and generally larger than in simulations, was quantified using the FWHM, and decreases from about 16% at 100 GeV to about 11% at 350 GeV. The discrepancy to simulations, which is particularly evident at low hadron energies, needs to be further investigated. △ Less

Submitted 13 November, 2023; originally announced November 2023.

Comments: 55 pages (without acronyms), 45 captioned figures

Alpha backgrounds in NaI(Tl) crystals of COSINE-100

Authors: G. Adhikari, N. Carlin, D. F. F. S. Cavalcante, J. Y. Cho, J. J. Choi, S. Choi, A. C. Ezeribe, L. E. Franca, C. Ha, I. S. Hahn, S. J. Hollick, E. J. Jeon, H. W. Joo, W. G. Kang, M. Kauer, B. H. Kim, H. J. Kim, J. Kim, K. W. Kim, S. H. Kim, S. K. Kim, S. W. Kim, W. K. Kim, Y. D. Kim, Y. H. Kim , et al. (38 additional authors not shown)

Abstract: COSINE-100 is a dark matter direct detection experiment with 106 kg NaI(Tl) as the target material. 210Pb and daughter isotopes are a dominant background in the WIMP region of interest and are detected via beta decay and alpha decay. Analysis of the alpha channel complements the background model as observed in the beta/gamma channel. We present the measurement of the quenching factors and Monte Ca… ▽ More COSINE-100 is a dark matter direct detection experiment with 106 kg NaI(Tl) as the target material. 210Pb and daughter isotopes are a dominant background in the WIMP region of interest and are detected via beta decay and alpha decay. Analysis of the alpha channel complements the background model as observed in the beta/gamma channel. We present the measurement of the quenching factors and Monte Carlo simulation results and activity quantification of the alpha decay components of the COSINE-100 NaI(Tl) crystals. The data strongly indicate that the alpha decays probabilistically undergo two possible quenching factors but require further investigation. The fitted results are consistent with independent measurements and improve the overall understanding of the COSINE-100 backgrounds. Furthermore, the half-life of 216Po has been measured to be 143.4 +/- 1.2 ms, which is consistent with and more precise than recent measurements. △ Less

Submitted 30 January, 2024; v1 submitted 8 November, 2023; originally announced November 2023.

Suppressed terahertz dynamics of water confined in nanometer gaps

Authors: Hyosim Yang, Gangseon Ji, Min Choi, Seondo Park, Hyeonjun An, Hyoung-Taek Lee, Joonwoo Jeong, Yun Daniel Park, Kyungwan Kim, Noejung Park, Jeeyoon Jeong, Dai-Sik Kim, Hyeong-Ryeol Park

Abstract: Nanoconfined waters have been extensively studied within various systems, demonstrating low permittivity under static conditions; however, their dynamics have been largely unexplored due to the lack of a robust platform, particularly in the terahertz (THz) regime where hydrogen bond dynamics occur. We report the THz complex refractive index of nanoconfined water within metal gaps ranging in width… ▽ More Nanoconfined waters have been extensively studied within various systems, demonstrating low permittivity under static conditions; however, their dynamics have been largely unexplored due to the lack of a robust platform, particularly in the terahertz (THz) regime where hydrogen bond dynamics occur. We report the THz complex refractive index of nanoconfined water within metal gaps ranging in width from 2 to 20 nanometers, spanning mostly interfacial waters all the way to quasi-bulk waters. These loop nanogaps, encasing water molecules, sharply enhance light-matter interactions, enabling precise measurements of refractive index, both real and imaginary parts, of nanometer-thick layers of water. Under extreme confinement, the suppressed dynamics of the long-range correlation of hydrogen bond networks corresponding to the THz frequency regime result in a significant reduction in the terahertz permittivity of even 'non-interfacial' water. This platform provides valuable insights into the long-range collective dynamics of water molecules which is crucial to understanding water-mediated processes such as protein folding, lipid rafts, and molecular recognition. △ Less

Submitted 4 November, 2023; v1 submitted 29 October, 2023; originally announced October 2023.

The acrylic vessel for JSNS$^{2}$-II neutrino target

Authors: C. D. Shin, S. Ajimura, M. K. Cheoun, J. H. Choi, J. Y. Choi, T. Dodo, J. Goh, K. Haga, M. Harada, S. Hasegawa, T. Hiraiwa, W. Hwang, T. Iida, H. I. Jang, J. S. Jang, H. Jeon, S. Jeon, K. K. Joo, D. E. Jung, S. K. Kang, Y. Kasugai, T. Kawasaki, E. J. Kim, J. Y. Kim, S. B. Kim , et al. (35 additional authors not shown)

Abstract: The JSNS$^{2}$ (J-PARC Sterile Neutrino Search at J-PARC Spallation Neutron Source) is an experiment designed for the search for sterile neutrinos. The experiment is currently at the stage of the second phase named JSNS$^{2}$-II with two detectors at near and far locations from the neutrino source. One of the key components of the experiment is an acrylic vessel, that is used for the target volume… ▽ More The JSNS$^{2}$ (J-PARC Sterile Neutrino Search at J-PARC Spallation Neutron Source) is an experiment designed for the search for sterile neutrinos. The experiment is currently at the stage of the second phase named JSNS$^{2}$-II with two detectors at near and far locations from the neutrino source. One of the key components of the experiment is an acrylic vessel, that is used for the target volume for the detection of the anti-neutrinos. The specifications, design, and measured properties of the acrylic vessel are described. △ Less

Submitted 11 December, 2023; v1 submitted 4 September, 2023; originally announced September 2023.

Journal ref: 2023 JINST 18 T12001

Prediction of Diblock Copolymer Morphology via Machine Learning

Authors: Hyun Park, Boyuan Yu, Juhae Park, Ge Sun, Emad Tajkhorshid, Juan J. de Pablo, Ludwig Schneider

Abstract: A machine learning approach is presented to accelerate the computation of block polymer morphology evolution for large domains over long timescales. The strategy exploits the separation of characteristic times between coarse-grained particle evolution on the monomer scale and slow morphological evolution over mesoscopic scales. In contrast to empirical continuum models, the proposed approach learn… ▽ More A machine learning approach is presented to accelerate the computation of block polymer morphology evolution for large domains over long timescales. The strategy exploits the separation of characteristic times between coarse-grained particle evolution on the monomer scale and slow morphological evolution over mesoscopic scales. In contrast to empirical continuum models, the proposed approach learns stochastically driven defect annihilation processes directly from particle-based simulations. A UNet architecture that respects different boundary conditions is adopted, thereby allowing periodic and fixed substrate boundary conditions of arbitrary shape. Physical concepts are also introduced via the loss function and symmetries are incorporated via data augmentation. The model is validated using three different use cases. Explainable artificial intelligence methods are applied to visualize the morphology evolution over time. This approach enables the generation of large system sizes and long trajectories to investigate defect densities and their evolution under different types of confinement. As an application, we demonstrate the importance of accessing late-stage morphologies for understanding particle diffusion inside a single block. This work has implications for directed self-assembly and materials design in micro-electronics, battery materials, and membranes. △ Less

Submitted 31 August, 2023; originally announced August 2023.

Comments: 51 page, 11 Figures and 5 figures in the SI

An inverse-designed nanophotonic interface for excitons in atomically thin materials

Authors: Ryan J. Gelly, Alexander D. White, Giovanni Scuri, Xing Liao, Geun Ho Ahn, Bingchen Deng, Kenji Watanabe, Takashi Taniguchi, Jelena Vučković, Hongkun Park

Abstract: Efficient nanophotonic devices are essential for applications in quantum networking, optical information processing, sensing, and nonlinear optics. Extensive research efforts have focused on integrating two-dimensional (2D) materials into photonic structures, but this integration is often limited by size and material quality. Here, we use hexagonal boron nitride (hBN), a benchmark choice for encap… ▽ More Efficient nanophotonic devices are essential for applications in quantum networking, optical information processing, sensing, and nonlinear optics. Extensive research efforts have focused on integrating two-dimensional (2D) materials into photonic structures, but this integration is often limited by size and material quality. Here, we use hexagonal boron nitride (hBN), a benchmark choice for encapsulating atomically thin materials, as a waveguiding layer while simultaneously improving the optical quality of the embedded films. When combined with photonic inverse design, it becomes a complete nanophotonic platform to interface with optically active 2D materials. Grating couplers and low-loss waveguides provide optical interfacing and routing, tunable cavities provide a large exciton-photon coupling to transition metal dichalcogenides (TMD) monolayers through Purcell enhancement, and metasurfaces enable the efficient detection of TMD dark excitons. This work paves the way for advanced 2D-material nanophotonic structures for classical and quantum nonlinear optics. △ Less

Submitted 25 August, 2023; originally announced August 2023.

Over 30,000-fold field enhancement of terahertz nanoresonators enabled by rapid inverse design

Authors: Hyoung-Taek Lee, Jeonghoon Kim, Joon Sue Lee, Mina Yoon, Hyeong-Ryeol Park

Abstract: The rapid development of 6G communications using terahertz (THz) electromagnetic waves has created a demand for highly sensitive THz nanoresonators capable of detecting these waves. Among the potential candidates, THz nanogap loop arrays show promising characteristics but require significant computational resources for accurate simulation. This requirement arises because their unit cells are 10 ti… ▽ More The rapid development of 6G communications using terahertz (THz) electromagnetic waves has created a demand for highly sensitive THz nanoresonators capable of detecting these waves. Among the potential candidates, THz nanogap loop arrays show promising characteristics but require significant computational resources for accurate simulation. This requirement arises because their unit cells are 10 times smaller than millimeter wavelengths, with nanogap regions that are 1,000,000 times smaller. To address this challenge, we propose a rapid inverse design method using physics-informed machine learning, employing double deep Q-learning with an analytical model of the THz nanogap loop array. In about 39 hours on a middle-level personal computer, our approach identifies the optimal structure through 200,000 iterations, achieving experimental electric field enhancement of 32,000 at 0.2 THz, 300 % stronger than prior results. Our analytical model-based approach significantly reduces computational resources, offering a practical alternative to numerical simulation-based inverse design △ Less

Submitted 18 October, 2023; v1 submitted 15 August, 2023; originally announced August 2023.

Journal ref: Nano Letters 23, 11685-11692 (2023)

Study on the accidental background of the JSNS$^2$ experiment

Authors: D. H. Lee, S. Ajimura, M. K. Cheoun, J. H. Choi, J. Y. Choi, T. Dodo, J. Goh, K. Haga, M. Harada, S. Hasegawa, T. Hiraiwa, W. Hwang, H. I. Jang, J. S. Jang, H. Jeon, S. Jeon, K. K. Joo, D. E. Jung, S. K. Kang, Y. Kasugai, T. Kawasaki, E. J. Kim, J. Y. Kim, S. B. Kim, W. Kim , et al. (33 additional authors not shown)

Abstract: JSNS$^2$ (J-PARC Sterile Neutrino Search at J-PARC Spallation Neutron Source) is an experiment which searches for sterile neutrinos via the observation of $\barν_μ \to \barν_{e}$ appearance oscillations using muon decay-at-rest neutrinos. The data taking of JSNS$^2$ have been performed from 2021. In this manuscript, a study of the accidental background is presented. The rate of the accidental back… ▽ More JSNS$^2$ (J-PARC Sterile Neutrino Search at J-PARC Spallation Neutron Source) is an experiment which searches for sterile neutrinos via the observation of $\barν_μ \to \barν_{e}$ appearance oscillations using muon decay-at-rest neutrinos. The data taking of JSNS$^2$ have been performed from 2021. In this manuscript, a study of the accidental background is presented. The rate of the accidental background is (9.29$\pm 0.39) \times 10^{-8}$ / spill with 0.75 MW beam power and comparable to the number of searching signals. △ Less

Submitted 22 April, 2024; v1 submitted 4 August, 2023; originally announced August 2023.

Comments: arXiv admin note: substantial text overlap with arXiv:2111.07482

Journal ref: Eur. Phys. J. C 84, 409 (2024)

Numerical Uncertainty of Convolutional Neural Networks Inference for Structural Brain MRI Analysis

Authors: Inés Gonzalez Pepe, Vinuyan Sivakolunthu, Hae Lang Park, Yohan Chatelain, Tristan Glatard

Abstract: This paper investigates the numerical uncertainty of Convolutional Neural Networks (CNNs) inference for structural brain MRI analysis. It applies Random Rounding -- a stochastic arithmetic technique -- to CNN models employed in non-linear registration (SynthMorph) and whole-brain segmentation (FastSurfer), and compares the resulting numerical uncertainty to the one measured in a reference image-pr… ▽ More This paper investigates the numerical uncertainty of Convolutional Neural Networks (CNNs) inference for structural brain MRI analysis. It applies Random Rounding -- a stochastic arithmetic technique -- to CNN models employed in non-linear registration (SynthMorph) and whole-brain segmentation (FastSurfer), and compares the resulting numerical uncertainty to the one measured in a reference image-processing pipeline (FreeSurfer recon-all). Results obtained on 32 representative subjects show that CNN predictions are substantially more accurate numerically than traditional image-processing results (non-linear registration: 19 vs 13 significant bits on average; whole-brain segmentation: 0.99 vs 0.92 Sørensen-Dice score on average), which suggests a better reproducibility of CNN results across execution environments. △ Less

Submitted 2 August, 2023; originally announced August 2023.

Search for inelastic WIMP-iodine scattering with COSINE-100

Authors: G. Adhikari, N. Carlin, J. J. Choi, S. Choi, A. C. Ezeribe, L. E. Franca, C. Ha, I. S. Hahn, S. J. Hollick, E. J. Jeon, J. H. Jo, H. W. Joo, W. G. Kang, M. Kauer, B. H. Kim, H. J. Kim, J. Kim, K. W. Kim, S. H. Kim, S. K. Kim, W. K. Kim, Y. D. Kim, Y. H. Kim, Y. J. Ko, D. H. Lee , et al. (34 additional authors not shown)

Abstract: We report the results of a search for inelastic scattering of weakly interacting massive particles (WIMPs) off $^{127}$I nuclei using NaI(Tl) crystals with a data exposure of 97.7 kg$\cdot$years from the COSINE-100 experiment. The signature of inelastic WIMP-$^{127}$I scattering is a nuclear recoil accompanied by a 57.6 keV $γ$-ray from the prompt deexcitation, producing a more energetic signal co… ▽ More We report the results of a search for inelastic scattering of weakly interacting massive particles (WIMPs) off $^{127}$I nuclei using NaI(Tl) crystals with a data exposure of 97.7 kg$\cdot$years from the COSINE-100 experiment. The signature of inelastic WIMP-$^{127}$I scattering is a nuclear recoil accompanied by a 57.6 keV $γ$-ray from the prompt deexcitation, producing a more energetic signal compared to the typical WIMP nuclear recoil signal. We found no evidence for this inelastic scattering signature and set a 90 $\%$ confidence level upper limit on the WIMP-proton spin-dependent, inelastic scattering cross section of $1.2 \times 10^{-37} {\rm cm^{2}}$ at the WIMP mass 500 ${\rm GeV/c^{2}}$. △ Less

Submitted 30 October, 2023; v1 submitted 19 July, 2023; originally announced July 2023.

Comments: 8 pages, 5 figures. arXiv admin note: text overlap with arXiv:2104.03537

Journal ref: Phys. Rev. D 108, 092006 (2023)

The Evaluation of Mechanical Properties of LB650 Cavities

Authors: J. Holzbauer, G. Wu, H. Park, K. McGee, A. Wixson, T. Khabiboulline, G. Romanov, S. Adams, D. Bice, S. K. Chandrasekaran, J. Ozelis, I. Gonin, C. Narug, R. Thiede, R. Treece, C. Grimm

Abstract: The PIP-II project's LB650 cavities could potentially be vulnerable to mechanical deformation because of the geometric shape of the cavity due to reduced beta. The mechanical property of the niobium half-cell was measured following various heat treatments. The 5-cell cavities were tested in a controlled drop test fashion and the real-world road test. The result showed that the 900 $°$C heat treatm… ▽ More The PIP-II project's LB650 cavities could potentially be vulnerable to mechanical deformation because of the geometric shape of the cavity due to reduced beta. The mechanical property of the niobium half-cell was measured following various heat treatments. The 5-cell cavities were tested in a controlled drop test fashion and the real-world road test. The result showed that the 900 $°$C heat treatment was compatible with cavity handling and transportation during production. The test provides the bases of the transportation specification and ship** container design guidelines. △ Less

Submitted 18 July, 2023; originally announced July 2023.

Comments: 21st International Conference on Radio-Frequency Superconductivity (SRF 2023)

Report number: FERMILAB-CONF-23-333-PIP2-TD

Telecom networking with a diamond quantum memory

Authors: Eric Bersin, Madison Sutula, Yan Qi Huan, Aziza Suleymanzade, Daniel R. Assumpcao, Yan-Cheng Wei, Pieter-Jan Stas, Can M. Knaut, Erik N. Knall, Carsten Langrock, Neil Sinclair, Ryan Murphy, Ralf Riedinger, Matthew Yeh, C. J. Xin, Saumil Bandyopadhyay, Denis D. Sukachev, Bartholomeus Machielse, David S. Levonian, Mihir K. Bhaskar, Scott Hamilton, Hongkun Park, Marko Lončar, Martin M. Fejer, P. Benjamin Dixon , et al. (2 additional authors not shown)

Abstract: Practical quantum networks require interfacing quantum memories with existing channels and systems that operate in the telecom band. Here we demonstrate low-noise, bidirectional quantum frequency conversion that enables a solid-state quantum memory to directly interface with telecom-band systems. In particular, we demonstrate conversion of visible-band single photons emitted from a silicon-vacancy… ▽ More Practical quantum networks require interfacing quantum memories with existing channels and systems that operate in the telecom band. Here we demonstrate low-noise, bidirectional quantum frequency conversion that enables a solid-state quantum memory to directly interface with telecom-band systems. In particular, we demonstrate conversion of visible-band single photons emitted from a silicon-vacancy (SiV) center in diamond to the telecom O-band, maintaining low noise ($g^2(0)<0.1$) and high indistinguishability ($V=89\pm8\%$). We further demonstrate the utility of this system for quantum networking by converting telecom-band time-bin pulses, sent across a lossy and noisy 50 km deployed fiber link, to the visible band and map** their quantum states onto a diamond quantum memory with fidelity $\mathcal{F}=87\pm 2.5 \% $. These results demonstrate the viability of SiV quantum memories integrated with telecom-band systems for scalable quantum networking applications. △ Less

Submitted 17 July, 2023; originally announced July 2023.

Comments: 9 pages, 5 figures + Supplemental Materials

Exceptional Classifications of Non-Hermitian Systems

Authors: Jung-Wan Ryu, Jae-Ho Han, Chang-Hwan Yi, Moon Jip Park, Hee Chul Park

Abstract: Eigenstate coalescence in non-Hermitian systems is widely observed in diverse scientific domains encompassing optics and open quantum systems. Recent investigations have revealed that adiabatic encircling of exceptional points (EPs) leads to a nontrivial Berry phase in addition to an exchange of eigenstates. Based on these phenomena, we propose in this work an exhaustive classification framework f… ▽ More Eigenstate coalescence in non-Hermitian systems is widely observed in diverse scientific domains encompassing optics and open quantum systems. Recent investigations have revealed that adiabatic encircling of exceptional points (EPs) leads to a nontrivial Berry phase in addition to an exchange of eigenstates. Based on these phenomena, we propose in this work an exhaustive classification framework for EPs in non-Hermitian physical systems. In contrast to previous classifications that only incorporate the eigenstate exchange effect, our proposed classification gives rise to finer $\mathbb{Z}_2$ classifications depending on the presence of a $π$ Berry phase after the encircling of the EPs. Moreover, by map** arbitrary one-dimensional systems to the adiabatic encircling of EPs, we can classify one-dimensional non-Hermitian systems characterized by topological phase transitions involving EPs. Applying our exceptional classification to various one-dimensional models, such as the non-reciprocal Su--Schrieffer--Heeger (SSH) model, we exhibit the potential for enhancing the understanding of topological phases in non-Hermitian systems. Additionally, we address exceptional bulk-boundary correspondence and the emergence of distinct topological boundary modes in non-Hermitian systems. △ Less

Submitted 12 June, 2023; originally announced June 2023.

Comments: 8 pages, 4 figures

Manipulation of Charge Delocalization in a Bulk Heterojunction Material Using a Mid-Infrared Push Pulse

Authors: Angela Montanaro, Kyu Hyung Park, Francesca Fassioli, Francesca Giusti, Daniele Fausti, Gregory D. Scholes

Abstract: In organic bulk heterojunction materials, charge delocalization has been proposed to play a vital role in the generation of free carriers by reducing the Coulomb attraction via an interfacial charge transfer exciton (CTX). Pump-push-probe (PPP) experiments produced evidence that the excess energy given by a push pulse enhances delocalization, thereby increasing photocurrent. However, previous stud… ▽ More In organic bulk heterojunction materials, charge delocalization has been proposed to play a vital role in the generation of free carriers by reducing the Coulomb attraction via an interfacial charge transfer exciton (CTX). Pump-push-probe (PPP) experiments produced evidence that the excess energy given by a push pulse enhances delocalization, thereby increasing photocurrent. However, previous studies have employed near-IR push pulses in the range 0.4-0.6 eV which is larger than the binding energy of a typical CTX. This raises the doubt that the push pulse may directly promote dissociation without involving delocalized states. Here, we perform PPP experiments with mid-IR push pulses at energies that are well below the binding energy of a CTX state (0.12-0.25 eV). We identify three types of CTX: delocalized, localized, and trapped. The excitation resides over multiple polymer chains in delocalized CTXs, while is restricted to a single chain (albeit maintaining a degree of intrachain delocalization) in localized CTXs. Trapped CTXs are instead completely localized. The pump pulse generates a hot delocalized CTX, which relaxes to a localized CTX, and eventually to trapped states. We find that photo-exciting localized CTXs with push pulses resonant to the mid-IR charge transfer absorption can promote delocalization and contribute to the formation of long-lived charge separated states. On the other hand, we found that trapped CTX are non-responsive to the push pulses. We hypothesize that delocalized states identified in prior studies are only accessible in systems where there is significant interchain electronic coupling or regioregularity that supports either interchain or intrachain polaron delocalization. This emphasizes the importance of engineering the micromorphology and energetics of the donor-acceptor interface to exploit a full potential of a material for photovoltaic applications. △ Less

Submitted 17 May, 2023; originally announced May 2023.

Journal ref: J. Phys. Chem. C 2023, 127, 28, 13712-13722

Search for bosonic super-weakly interacting massive particles at COSINE-100

Authors: G. Adhikari, N. Carlin, J. J. Choi, S. Choi, A. C. Ezeribe, L. E. Franca, C. Ha, I. S. Hahn, S. J. Hollick, E. J. Jeon, J. H. Jo, H. W. Joo, W. G. Kang, M. Kauer, B. H. Kim, H. J. Kim, J. Kim, K. W. Kim, S. H. Kim, S. K. Kim, W. K. Kim, Y. D. Kim, Y. H. Kim, Y. J. Ko, D. H. Lee , et al. (34 additional authors not shown)

Abstract: We present results of a search for bosonic super-weakly interacting massive particles (BSW) as keV scale dark matter candidates that is based on an exposure of 97.7 kg$\cdot$year from the COSINE experiment. In this search, we employ, for the first time, Compton-like as well as absorption processes for pseudoscalar and vector BSWs. No evidence for BSWs is found in the mass range from 10… ▽ More We present results of a search for bosonic super-weakly interacting massive particles (BSW) as keV scale dark matter candidates that is based on an exposure of 97.7 kg$\cdot$year from the COSINE experiment. In this search, we employ, for the first time, Compton-like as well as absorption processes for pseudoscalar and vector BSWs. No evidence for BSWs is found in the mass range from 10 $\mathrm{keV/c}^2$ to 1 $\mathrm{MeV/c}^2$, and we present the exclusion limits on the dimensionless coupling constants to electrons $g_{ae}$ for pseudoscalar and $κ$ for vector BSWs at 90% confidence level. Our results show that these limits are improved by including the Compton-like process in masses of BSW, above $\mathcal{O}(100\,\mathrm{keV/c}^2)$. △ Less

Submitted 27 August, 2023; v1 submitted 3 April, 2023; originally announced April 2023.

Journal ref: Phys. Rev. D 108 (2023) L041301

Development of a thorium coating on an aluminium substrate by using electrodeposition method and alpha spectroscopy

Authors: Dal-Ho Moon, Vivek Chavan, Vasant Bhoraskar, Yeong Hoon Jeong, Jung Ho Park, Su-Jeong Suh, Seung-Woo Hong

Abstract: A thin coating of thorium on aluminium substrates with the areal density of 110 to 130 $μg/cm^2$ is developed over a circular area of 22 mm diameter by using the electrodeposition method. An electrodeposition system is fabricated to consist of three components; an anode made of a platinum mesh, a cylindrical-shape vessel to contain the thorium solution, and a cathode in the form of a circular alum… ▽ More A thin coating of thorium on aluminium substrates with the areal density of 110 to 130 $μg/cm^2$ is developed over a circular area of 22 mm diameter by using the electrodeposition method. An electrodeposition system is fabricated to consist of three components; an anode made of a platinum mesh, a cylindrical-shape vessel to contain the thorium solution, and a cathode in the form of a circular aluminium plate. The aluminium plate is mounted horizontally, and the platinum mesh is connected to an axial rod of an electric motor, mounted vertically and normal to the plane of the aluminium. The electrolyte solution is prepared by dissolving a known-weight thorium nitrate powder in 0.8 M HNO3 and isopropanol. The system is operated either in constant voltage (CV) or constant current (CC) mode. Under the electric field between the anode and cathode, thorium ions were deposited on the aluminium substrate mounted on the cathode. In the CV mode at 320, 360, and 400 V and in the CC mode at 15 mA, thorium films were formed over a circular area of the aluminium substrate. The areal density of thorium coating was measured by detecting emitted alpha particles. The areal density of thorium varied from 80 to 130 $μg/cm^2$ by changing the deposition time from 10 to 60 min. The results from the CV mode and CC mode are compared, and the radial dependence in the measured areal density is discussed for different modes of the electric field. The developed thorium coatings are to be used in the in-house development of particle detectors, fast neutron converters, targets for thorium fission experiments, and other purposes. △ Less

Submitted 11 March, 2023; originally announced March 2023.

Comments: 11 pages, 5 figures, 1 table

Realization of Non-Hermitian Hopf Bundle Matter

Authors: Yung Kim, Hee Chul Park, Minwook Kyung, Kyungmin Lee, Jung-Wan Ryu, Oubo You, Shuang Zhang, Bumki Min, Moon Jip Park

Abstract: Line excitations in topological phases are a subject of particular interest because their mutual linking structures encode robust topological information of matter. It has been recently shown that the linking and winding of complex eigenenergy strings can classify one-dimensional non-Hermitian topological matter. However, in higher dimensions, bundles of linked strings can emerge such that every s… ▽ More Line excitations in topological phases are a subject of particular interest because their mutual linking structures encode robust topological information of matter. It has been recently shown that the linking and winding of complex eigenenergy strings can classify one-dimensional non-Hermitian topological matter. However, in higher dimensions, bundles of linked strings can emerge such that every string is mutually linked with all the other strings. Interestingly, despite being an unconventional topological structure, a non-Hermitian Hopf bundle has not been experimentally clarified. Here, we make the first attempt to explore the non-Hermitian Hopf bundle by visualizing the global linking structure of spinor strings in the momentum space of a two-dimensional electric circuit. By exploiting the flexibility of reconfigurable couplings between circuit nodes, we can study the non-Hermitian topological phase transition and gain insight into the intricate structure of the Hopf bundle. Furthermore, we find that the emergence of a higher-order skin effect in real space is accompanied by the linking of spinor strings in momentum space, revealing a bulk-boundary correspondence between the two domains. The proposed non-Hermitian Hopf bundle platform and visualization methodology pave the way to design new topologically robust non-Hermitian phases of matter. △ Less

Submitted 23 March, 2023; originally announced March 2023.

Nonlinear ill-posed problem in low-dose dental cone-beam computed tomography

Authors: Hyoung Suk Park, Chang Min Hyun, ** Keun Seo

Abstract: This paper describes the mathematical structure of the ill-posed nonlinear inverse problem of low-dose dental cone-beam computed tomography (CBCT) and explains the advantages of a deep learning-based approach to the reconstruction of computed tomography images over conventional regularization methods. This paper explains the underlying reasons why dental CBCT is more ill-posed than standard comput… ▽ More This paper describes the mathematical structure of the ill-posed nonlinear inverse problem of low-dose dental cone-beam computed tomography (CBCT) and explains the advantages of a deep learning-based approach to the reconstruction of computed tomography images over conventional regularization methods. This paper explains the underlying reasons why dental CBCT is more ill-posed than standard computed tomography. Despite this severe ill-posedness, the demand for dental CBCT systems is rapidly growing because of their cost competitiveness and low radiation dose. We then describe the limitations of existing methods in the accurate restoration of the morphological structures of teeth using dental CBCT data severely damaged by metal implants. We further discuss the usefulness of panoramic images generated from CBCT data for accurate tooth segmentation. We also discuss the possibility of utilizing radiation-free intra-oral scan data as prior information in CBCT image reconstruction to compensate for the damage to data caused by metal implants. △ Less

Submitted 2 March, 2023; originally announced March 2023.

A composite electrodynamic mechanism to reconcile spatiotemporally resolved exciton transport in quantum dot superlattices

Authors: Rongfeng Yuan, Trevor D. Roberts, Rafaela M. Brinn, Alexander A. Choi, Ha H. Park, Chang Yan, Justin C. Ondry, Siamak Khorasani, David J. Masiello, Ke Xu, A. Paul Alivisatos, Naomi S. Ginsberg

Abstract: Quantum dot (QD) solids are promising optoelectronic materials; further advancing their device functionality depends on understanding their energy transport mechanisms. The commonly invoked near-field Förster resonance energy transfer (FRET) theory often underestimates the exciton hop** rate in QD solids, yet no consensus exists on the underlying cause. In response, we use time-resolved ultrafas… ▽ More Quantum dot (QD) solids are promising optoelectronic materials; further advancing their device functionality depends on understanding their energy transport mechanisms. The commonly invoked near-field Förster resonance energy transfer (FRET) theory often underestimates the exciton hop** rate in QD solids, yet no consensus exists on the underlying cause. In response, we use time-resolved ultrafast stimulated emission depletion (TRUSTED) microscopy, an ultrafast transformation of stimulated emission depletion (STED) microscopy to spatiotemporally resolve exciton diffusion in tellurium-doped CdSe-core/CdS-shell QD superlattices. We measure the concomitant time-resolved exciton energy decay due to excitons sampling a heterogeneous energetic landscape within the superlattice. The heterogeneity is quantified by single-particle emission spectroscopy. This powerful multimodal set of observables provides sufficient constraints on a kinetic Monte Carlo simulation of exciton transport to elucidate a composite transport mechanism that includes both near-field FRET and previously-neglected far-field emission/reabsorption contributions. Uncovering this mechanism offers a much-needed unified framework in which to characterize transport in QD solids and additional principles for device design. △ Less

Submitted 24 September, 2023; v1 submitted 21 February, 2023; originally announced February 2023.

Comments: 48 pages, including supplement

Journal ref: Science Advances, Vol 9, Issue 42, eadh241 (2023)

Surface potential-driven surface states in 3D topological photonic crystals

Authors: Haedong Park, Sang Soon Oh, Seungwoo Lee

Abstract: Surface potential in a topological matter could unprecedentedly localize the waves. However, this surface potential is yet to be exploited in topological photonic systems. Here, we demonstrate that photonic surface states can be induced and controlled by the surface potential in a dielectric double gyroid (DG) photonic crystal. The basis translation in a unit cell enables tuning of the surface pot… ▽ More Surface potential in a topological matter could unprecedentedly localize the waves. However, this surface potential is yet to be exploited in topological photonic systems. Here, we demonstrate that photonic surface states can be induced and controlled by the surface potential in a dielectric double gyroid (DG) photonic crystal. The basis translation in a unit cell enables tuning of the surface potential, which in turn regulates the degree of wave localization. The gradual modulation of DG photonic crystals enables the generation of a pseudomagnetic field. Overall, this study shows the interplay between surface potential and pseudomagnetic field regarding the surface states. The physical consequences outlined herein not only widen the scope of surface states in 3D photonic crystals but also highlight the importance of surface treatments in a photonic system. △ Less

Submitted 17 February, 2023; originally announced February 2023.

Femtosecond Photophysics of Molecular Polaritons

Authors: Francesca Fassioli, Kyu Hyung Park, Sarah E. Bard, Gregory D. Scholes

Abstract: Molecular polaritons are hybrid states of photonic and molecular character that form when molecules strongly interact with light. Strong coupling tunes energy levels and importantly, can modify molecular properties (e.g. photoreaction rates) opening an avenue for novel polariton chemistry. In this perspective, we focus on the collective aspects of strongly coupled molecular systems and how this pe… ▽ More Molecular polaritons are hybrid states of photonic and molecular character that form when molecules strongly interact with light. Strong coupling tunes energy levels and importantly, can modify molecular properties (e.g. photoreaction rates) opening an avenue for novel polariton chemistry. In this perspective, we focus on the collective aspects of strongly coupled molecular systems and how this pertains to the dynamical response of such systems, which though of key importance for attaining modified function under polariton formation, is still not well understood. We discuss how the ultrafast time and spectral resolution make pump-probe spectroscopy an ideal tool to reveal the energy transfer pathways from polariton states to other molecular states of functional interest. Finally, we illustrate how analyzing the free (rather than electronic) energy structure in molecular polariton systems may provide new clues into how energy flows and thus how strong coupling may be exploited. △ Less

Submitted 11 February, 2023; originally announced February 2023.

Journal ref: J. Phys. Chem. Lett. 2021, 12, 46, 11444

Effect of Annealing Temperature on Minimum Domain Size of Ferroelectric Hafnia

Authors: Seokjung Yun, Hoon Kim, Myungsoo Seo, Min-Ho Kang, Taeho Kim, Seongwoo Cho, Min Hyuk Park, Sanghun Jeon, Yang-Kyu Choi, Seungbum Hong

Abstract: Here, we optimized the annealing temperature of HZO/TiN thin film heterostructure via multiscale analysis of remnant polarization, crystallographic phase, minimum ferroelectric domain size, and average grain size. We found that the remnant polarization was closely related to the relative amount of the orthorhombic phase whereas the minimum domain size was to the relative amount of the monoclinic p… ▽ More Here, we optimized the annealing temperature of HZO/TiN thin film heterostructure via multiscale analysis of remnant polarization, crystallographic phase, minimum ferroelectric domain size, and average grain size. We found that the remnant polarization was closely related to the relative amount of the orthorhombic phase whereas the minimum domain size was to the relative amount of the monoclinic phase. The minimum domain size was obtained at the annealing temperature of 500$^\cird$C while the optimum remnant polarization and capacitance at the annealing temperature of 600$^\circ$C. We conclude that the minimum domain size is more important than the sheer magnitude of remnant polarization considering the retention and fatigue of switchable polarization in nanoscale ferroelectric devices. Our results are expected to contribute to the development of ultra-low-power logic transistors and next-generation non-volatile memory devices. △ Less

Submitted 12 January, 2023; originally announced January 2023.

Comments: 28 pages, 11 figures, 1 table

Proton Imaging of High-Energy-Density Laboratory Plasmas

Authors: Derek B. Schaeffer, Archie F. A. Bott, Marco Borghesi, Kirk A. Flippo, William Fox, Julien Fuchs, Chikang Li, Hye-Sook Park, Fredrick H. Seguin, Petros Tzeferacos, Louise Willingale

Abstract: Proton imaging has become a key diagnostic for measuring electromagnetic fields in high-energy-density (HED) laboratory plasmas. Compared to other techniques for diagnosing fields, proton imaging is a non-perturbative measurement that can simultaneously offer high spatial and temporal resolution and the ability to distinguish between electric and magnetic fields. Consequently, proton imaging has b… ▽ More Proton imaging has become a key diagnostic for measuring electromagnetic fields in high-energy-density (HED) laboratory plasmas. Compared to other techniques for diagnosing fields, proton imaging is a non-perturbative measurement that can simultaneously offer high spatial and temporal resolution and the ability to distinguish between electric and magnetic fields. Consequently, proton imaging has been used in a wide range of HED experiments, from inertial confinement fusion to laboratory astrophysics. An overview is provided on the state of the art of proton imaging, including detailed discussion of experimental considerations like proton sources and detectors, the theory of proton-imaging analysis, and a survey of experimental results demonstrating the breadth of applications. Topics at the frontiers of proton imaging development are also described, along with an outlook on the future of the field. △ Less

Submitted 15 December, 2022; originally announced December 2022.

Comment on "Amplified emission and lasing in photonic time crystals"

Authors: Jagang Park, Hee Chul Park, Kyungmin Lee, Jonghwa Shin, Jung-Wan Ryu, Wonju Jeon, Namkyoo Park, Bumki Min

Abstract: Lyubarov et al. (Research Articles, 22 July 2022, p. 425) claim that the spontaneous emission rate of an atom vanishes at the momentum gap edges of photonic Floquet media. We show that their theoretical prediction is based on assumptions that result in misleading interpretations on the spontaneous emission rate in photonic Floquet media. Lyubarov et al. (Research Articles, 22 July 2022, p. 425) claim that the spontaneous emission rate of an atom vanishes at the momentum gap edges of photonic Floquet media. We show that their theoretical prediction is based on assumptions that result in misleading interpretations on the spontaneous emission rate in photonic Floquet media. △ Less

Submitted 18 April, 2024; v1 submitted 27 November, 2022; originally announced November 2022.

Enhanced five-photon photoluminescence in subwavelength AlGaAs resonators

Authors: Anastasiia Zalogina, Pavel Tonkaev, Aditya Tripathi, Hoo-Cheol Lee, Luca Carletti, Hong-Gyu Park, Sergey S. Kruk, Yuri Kivshar

Abstract: Multiphoton processes of absorption photoluminescence have enabled a wide range of applications including three-dimensional microfabrication, data storage, and biological imaging. While the applications of two-photon and three-photon absorption and luminescence have matured considerably, higher-order photoluminescence processes remain more challenging to study due to their lower efficiency, partic… ▽ More Multiphoton processes of absorption photoluminescence have enabled a wide range of applications including three-dimensional microfabrication, data storage, and biological imaging. While the applications of two-photon and three-photon absorption and luminescence have matured considerably, higher-order photoluminescence processes remain more challenging to study due to their lower efficiency, particularly in subwavelength systems. Here we report the observation of it five-photon luminescence from a single subwavelength nanoantenna at room temperature enabled by the Mie resonances. We excite an AlGaAs resonator at around 3.6 um and observe photoluminescence at around 740 nm. We show that the interplay of the Mie multipolar modes at the subwavelength scale can enhance the efficiency of the five-photon luminescence by at least four orders of magnitude, being limited only by sensitivity of our detector. Our work paves the way towards applications of higher-order multiphoton processes at the subwavelength scales enabled by the physics of Mie resonances. △ Less

Submitted 8 January, 2023; v1 submitted 20 November, 2022; originally announced November 2022.

Comments: 18 pages, 5 figures

Journal ref: Nano Letters, 2022, 22, 10, 4200-4206

Pulse shape discrimination using a convolutional neural network for organic liquid scintillator signals

Authors: K. Y. Jung, B. Y. Han, E. J. Jeon, Y. Jeong, H. S. Jo, J. Y. Kim, J. G. Kim, Y. D. Kim, Y. J. Ko, M. H. Lee, J. Lee, C. S. Moon, Y. M. Oh, H. K. Park, S. H. Seo, D. W. Seol, K. Siyeon, G. M. Sun, Y. S. Yoon, I. Yu

Abstract: A convolutional neural network (CNN) architecture is developed to improve the pulse shape discrimination (PSD) power of the gadolinium-loaded organic liquid scintillation detector to reduce the fast neutron background in the inverse beta decay candidate events of the NEOS-II data. A power spectrum of an event is constructed using a fast Fourier transform of the time domain raw waveforms and put in… ▽ More A convolutional neural network (CNN) architecture is developed to improve the pulse shape discrimination (PSD) power of the gadolinium-loaded organic liquid scintillation detector to reduce the fast neutron background in the inverse beta decay candidate events of the NEOS-II data. A power spectrum of an event is constructed using a fast Fourier transform of the time domain raw waveforms and put into CNN. An early data set is evaluated by CNN after it is trained using low energy $β$ and $α$ events. The signal-to-background ratio averaged over 1-10 MeV visible energy range is enhanced by more than 20% in the result of the CNN method compared to that of an existing conventional PSD method, and the improvement is even higher in the low energy region. △ Less

Submitted 15 January, 2023; v1 submitted 14 November, 2022; originally announced November 2022.

Comments: 16 pages, 10 figures

X-ray Free Electron Laser Studies of Electron and Phonon Dynamics of Graphene Adsorbed on Copper

Authors: Hirohito Ogasawara, Han Wang, Jörgen Gladh, Alessandro Gallo, Ralph Page, Johannes Voss, Alan Luntz, Elias Diesen, Frank Abild-Pedersen, Anders Nilsson, Markus Soldemo, Marc Zajac, Andrew Attar, Michelle E. Chen, Sang Wan Cho, Abhishek Katoch, Ki-Jeong Kim, Kyung Hwan Kim, Minseok Kim, Soonnam Kwon, Sang Han Park, Henrique Ribeiro, Sami Sainio, Hsin-Yi Wang, Cheolhee Yang , et al. (1 additional authors not shown)

Abstract: We report optical pum** and X-ray absorption spectroscopy experiments at the PAL free electron laser that directly probe the electron dynamics of a graphene monolayer adsorbed on copper in the femtosecond regime. By analyzing the results with ab-initio theory we infer that the excitation of graphene is dominated by indirect excitation from hot electron-hole pairs created in the copper by the opt… ▽ More We report optical pum** and X-ray absorption spectroscopy experiments at the PAL free electron laser that directly probe the electron dynamics of a graphene monolayer adsorbed on copper in the femtosecond regime. By analyzing the results with ab-initio theory we infer that the excitation of graphene is dominated by indirect excitation from hot electron-hole pairs created in the copper by the optical laser pulse. However, once the excitation is created in graphene, its decay follows a similar path as in many previous studies of graphene adsorbed on semiconductors, i e. rapid excitation of SCOPS (Strongly Coupled Optical Phonons) and eventual thermalization. It is likely that the lifetime of the hot electron-hole pairs in copper governs the lifetime of the electronic excitation of the graphene. △ Less

Submitted 1 November, 2022; originally announced November 2022.

Comments: 22 pages, 8 Figures including Supplementary Material

Machine Learning Assisted Design and Optimization of Transition Metal-Incorporated Carbon Quantum Dot Catalysts for Hydrogen Evolution Reaction

Authors: Duong Nguyen Nguyen, Min-Cheol Kim, Unbeom Baeck, Jaehyoung Lim, Namsoo Shin, Jaekook Kim, Heechae Choi, Ho Seok Park, Uk Sim, Jung Kyu Kim

Abstract: Development of cost-effective hydrogen evolution reaction (HER) catalysts with outstanding catalytic activity, replacing cost-prohibitive noble metal-based catalysts, is critical for practical green hydrogen production. A popular strategy for promoting the catalytic performance of noble metal-free catalysts is to incorporate earth-abundant transition metal (TM) atoms into nanocarbon platforms such… ▽ More Development of cost-effective hydrogen evolution reaction (HER) catalysts with outstanding catalytic activity, replacing cost-prohibitive noble metal-based catalysts, is critical for practical green hydrogen production. A popular strategy for promoting the catalytic performance of noble metal-free catalysts is to incorporate earth-abundant transition metal (TM) atoms into nanocarbon platforms such as carbon quantum dots (CQDs). Although data-driven catalyst design methods can significantly accelerate the rational design of TM element-doped CQD (M@CQD) catalysts, they suffer from either a simplified theoretical model or the prohibitive cost and complexity of experimental data generation. In this study, we propose an effective and facile HER catalyst design strategy based on machine learning (ML) and ML model verification using electrochemical methods accompanied with density functional theory (DFT) simulations. Based on a Bayesian genetic algorithm (BGA) ML model, the Ni@CQD catalyst on a three-dimensional reduced graphene oxide (3D rGO) conductor is proposed as the best HER catalyst under the optimal conditions of catalyst loading, electrode type, and temperature and pH of electrolyte. We validate the ML results with electrochemical experiments, where the Ni@CQD catalyst exhibited superior HER activity, requiring an overpotential of 189 mV to achieve 10 mA cm-2 with a Tafel slope of 52 mV dec-1 and impressive durability in acidic media. We expect that this methodology and the excellent performance of the Ni@CQD catalyst provide an effective route for the rational design of highly active electrocatalysts for commercial applications. △ Less

Submitted 26 October, 2022; originally announced October 2022.

A lab scale experiment for keV sterile neutrino search

Authors: Y. C. Lee, H. B. Kim, H. L. Kim, S. K. Kim, Y. H. Kim, D. H. Kwon, H. S. Lim, H. S. Park, K. R. Woo, Y. S. Yoon

Abstract: We developed a simple small-scale experiment to measure the beta decay spectrum of $^{3}$H. The aim of this research is to investigate the presence of sterile neutrinos in the keV region. Tritium nuclei were embedded in a 1$\times$1$\times$1 cm$^3$ LiF crystal from the $^6$Li(n,$α$)$^3$H reaction. The energy of the beta electrons absorbed in the LiF crystal was measured with a magnetic microcalori… ▽ More We developed a simple small-scale experiment to measure the beta decay spectrum of $^{3}$H. The aim of this research is to investigate the presence of sterile neutrinos in the keV region. Tritium nuclei were embedded in a 1$\times$1$\times$1 cm$^3$ LiF crystal from the $^6$Li(n,$α$)$^3$H reaction. The energy of the beta electrons absorbed in the LiF crystal was measured with a magnetic microcalorimeter at 40 mK. We report a new method of sample preparation, experiments, and analysis of $^3$H beta measurements. The spectrum of a 10-hour measurement agrees well with the expected spectrum of $^3$H beta decay. The analysis results indicate that this method can be used to search for keV-scale sterile neutrinos. △ Less

Submitted 21 October, 2022; v1 submitted 20 October, 2022; originally announced October 2022.

Indefinite and Bidirectional Near Infrared Nanocrystal Photoswitching

Authors: Changhwan Lee, Emma Z. Xu, Kevin W. C. Kwock, Ayelet Teitelboim, Yawei Liu, Natalie Fardian-Melamed, Cassio C. S. Pedroso, Hye Sun Park, Jongwoo Kim, Stefanie D. Pritzl, Sang Hwan Nam, Theobald Lohmueller, Peter Ercius, Yung Doug Suh, Bruce E Cohen, Emory M Chan, P. James Schuck

Abstract: Materials whose luminescence can be switched by optical stimulation drive technologies ranging from superresolution imaging1-4, nanophotonics5, and optical data storage6-8, to targeted pharmacology, optogenetics, and chemical reactivity9. These photoswitchable probes, including organic fluorophores and proteins, are prone to photodegradation, and often require phototoxic doses of ultraviolet (UV)… ▽ More Materials whose luminescence can be switched by optical stimulation drive technologies ranging from superresolution imaging1-4, nanophotonics5, and optical data storage6-8, to targeted pharmacology, optogenetics, and chemical reactivity9. These photoswitchable probes, including organic fluorophores and proteins, are prone to photodegradation, and often require phototoxic doses of ultraviolet (UV) or visible light. Colloidal inorganic nanoparticles have significant stability advantages over existing photoswitchable materials, but the ability to switch emission bidirectionally, particularly with NIR light, has not been reported with nanoparticles. Here, we present 2-way, near-infrared (NIR) photoswitching of avalanching nanoparticles (ANPs), showing full optical control of upconverted emission using phototriggers in the NIR-I and NIR-II spectral regions useful for subsurface imaging. Employing single-step photodarkening10-13 and photobrightening12,14-18, we demonstrate indefinite photoswitching of individual nanoparticles (>1000 cycles over 7 h) in ambient or aqueous conditions without measurable photodegradation. Critical steps of the photoswitching mechanism are elucidated by modeling and by measuring the photon avalanche properties of single ANPs in both bright and dark states. Unlimited, reversible photoswitching of ANPs enables indefinitely rewritable 2D and 3D multi-level optical patterning of ANPs, as well as optical nanoscopy with sub-Å localization superresolution that allows us to distinguish individual ANPs within tightly packed clusters. △ Less

Submitted 13 September, 2022; originally announced September 2022.

Comments: 15 pages, 5 figures

Measurement of the cluster position resolution of the Belle II Silicon Vertex Detector

Authors: R. Leboucher, K. Adamczyk, L. Aggarwal, H. Aihara, T. Aziz, S. Bacher, S. Bahinipati, G. Batignani, J. Baudot, P. K. Behera, S. Bettarini, T. Bilka, A. Bozek, F. Buchsteiner, G. Casarosa, L. Corona, T. Czank, S. B. Das, G. Dujany, C. Finck, F. Forti, M. Friedl, A. Gabrielli, E. Ganiev, B. Gobbo , et al. (56 additional authors not shown)

Abstract: The Silicon Vertex Detector (SVD), with its four double-sided silicon strip sensor layers, is one of the two vertex sub-detectors of Belle II operating at SuperKEKB collider (KEK, Japan). Since 2019 and the start of the data taking, the SVD has demonstrated a reliable and highly efficient operation, even running in an environment with harsh beam backgrounds that are induced by the world's highest… ▽ More The Silicon Vertex Detector (SVD), with its four double-sided silicon strip sensor layers, is one of the two vertex sub-detectors of Belle II operating at SuperKEKB collider (KEK, Japan). Since 2019 and the start of the data taking, the SVD has demonstrated a reliable and highly efficient operation, even running in an environment with harsh beam backgrounds that are induced by the world's highest instantaneous luminosity. In order to provide the best quality track reconstruction with an efficient pattern recognition and track fit, and to correctly propagate the uncertainty on the hit's position to the track parameters, it is crucial to precisely estimate the resolution of the cluster position measurement. Several methods for estimating the position resolution directly from the data will be discussed. △ Less

Submitted 7 September, 2022; originally announced September 2022.

Comments: 4 pages, The 30th International Workshop on Vertex Detectors

Journal ref: NIMA, Volume 1033, 2022, 166746

Ultrafast optical nanoscopy of carrier dynamics in silicon nanowires

Authors: **gang Li, Rundi Yang, Yoonsoo Rho, Penghong Ci, Matthew Eliceiri, Hee K. Park, Junqiao Wu, Costas P. Grigoropoulos

Abstract: Carrier distribution and dynamics in semiconductor materials often govern their physical properties that are critical to functionalities and performance in industrial applications. The continued miniaturization of electronic and photonic devices calls for tools to probe carrier behavior in semiconductors simultaneously at the picosecond time and nanometer length scales. Here, we report pump-probe… ▽ More Carrier distribution and dynamics in semiconductor materials often govern their physical properties that are critical to functionalities and performance in industrial applications. The continued miniaturization of electronic and photonic devices calls for tools to probe carrier behavior in semiconductors simultaneously at the picosecond time and nanometer length scales. Here, we report pump-probe optical nanoscopy in the visible-near-infrared spectral region to characterize the carrier dynamics in silicon nanostructures. By coupling experiments with the point-dipole model, we resolve the size-dependent photoexcited carrier lifetime in individual silicon nanowires. We further demonstrate local carrier decay time map** in silicon nanostructures with a sub-50 nm spatial resolution. Our study enables the nanoimaging of ultrafast carrier kinetics, which will find promising applications in the future design of a broad range of electronic, photonic, and optoelectronic devices. △ Less

Submitted 15 November, 2022; v1 submitted 23 August, 2022; originally announced August 2022.