-
Dispersive-wave-agile optical frequency division
Authors:
Qing-Xin Ji,
Wei Zhang,
Peng Liu,
Warren **,
Joel Guo,
Jonathan Peters,
Lue Wu,
Avi Feshali,
Mario Paniccia,
Vladimir Ilchenko,
John Bowers,
Andrey Matsko,
Kerry Vahala
Abstract:
The remarkable frequency stability of resonant systems in the optical domain (optical cavities and atomic transitions) can be harnessed at frequency scales accessible by electronics using optical frequency division. This capability is revolutionizing technologies spanning time kee** to high-performance electrical signal sources. A version of the technique called 2-point optical frequency divisio…
▽ More
The remarkable frequency stability of resonant systems in the optical domain (optical cavities and atomic transitions) can be harnessed at frequency scales accessible by electronics using optical frequency division. This capability is revolutionizing technologies spanning time kee** to high-performance electrical signal sources. A version of the technique called 2-point optical frequency division (2P-OFD) is proving advantageous for application to high-performance signal sources. In 2P-OFD, an optical cavity anchors two spectral endpoints defined by lines of a frequency comb. The comb need not be self-referenced, which greatly simplifies the system architecture and reduces power requirements. Here, a 2P-OFD microwave signal source is demonstrated with record-low phase noise using a microcomb. Key to this advance is a spectral endpoint defined by a frequency agile single-mode dispersive wave that is emitted by the microcomb soliton. Moreover, the system frequency reference is a compact all-solid-state optical cavity with a record Q-factor. The results advance integrable microcomb-based signal sources into the performance realm of much larger microwave sources.
△ Less
Submitted 1 March, 2024;
originally announced March 2024.
-
High-coherence hybrid-integrated 780 nm source by self-injection-locked second-harmonic generation in a high-Q silicon-nitride resonator
Authors:
Bohan Li,
Zhiquan Yuan,
Warren **,
Lue Wu,
Joel Guo,
Qing-Xin Ji,
Avi Feshali,
Mario Paniccia,
John E. Bowers,
Kerry J. Vahala
Abstract:
By self-injection-locking a 1560 nm distributed feedback semiconductor laser to a high-$Q$ silicon nitride resonator, a high-coherence 780 nm second harmonic signal is generated via the photogalvanic-induced second-order nonlinearity. A record-low frequency noise floor of 4 Hz$^2$/Hz is achieved for the 780 nm emission. The approach can be generalized for signal generation over a wide range of vis…
▽ More
By self-injection-locking a 1560 nm distributed feedback semiconductor laser to a high-$Q$ silicon nitride resonator, a high-coherence 780 nm second harmonic signal is generated via the photogalvanic-induced second-order nonlinearity. A record-low frequency noise floor of 4 Hz$^2$/Hz is achieved for the 780 nm emission. The approach can be generalized for signal generation over a wide range of visible and near-visible bands.
△ Less
Submitted 18 June, 2023;
originally announced June 2023.
-
Soliton pulse pairs at multiple colors in normal dispersion microresonators
Authors:
Zhiquan Yuan,
Maodong Gao,
Yan Yu,
Heming Wang,
Warren **,
Qing-Xin Ji,
Avi Feshali,
Mario Paniccia,
John Bowers,
Kerry Vahala
Abstract:
Soliton microcombs are hel** to advance the miniaturization of a range of comb systems. These combs mode lock through the formation of short temporal pulses in anomalous dispersion resonators. Here, a new microcomb is demonstrated that mode locks through the formation of pulse pairs in normal-dispersion coupled-ring resonators. Unlike conventional microcombs, pulses in this system cannot exist a…
▽ More
Soliton microcombs are hel** to advance the miniaturization of a range of comb systems. These combs mode lock through the formation of short temporal pulses in anomalous dispersion resonators. Here, a new microcomb is demonstrated that mode locks through the formation of pulse pairs in normal-dispersion coupled-ring resonators. Unlike conventional microcombs, pulses in this system cannot exist alone, and instead must phase lock in pairs to form a bright soliton comb. Also, the pulses can form at recurring spectral windows and the pulses in each pair feature different optical spectra. This pairwise mode-locking modality extends to higher dimensions and we demonstrate 3-ring systems in which 3 pulses mode lock through alternating pairwise pulse coupling. The results are demonstrated using the new CMOS-foundry platform that has not previously produced bright solitons on account of its inherent normal dispersion. The ability to generate multi-color pulse pairs over multiple rings is an important new feature for microcombs. It can extend the concept of all-optical soliton buffers and memories to multiple storage rings that multiplex pulses with respect to soliton color and that are spatially addressable. The results also suggest a new platform for the study of quantum combs and topological photonics.
△ Less
Submitted 26 January, 2023;
originally announced January 2023.
-
Engineered zero-dispersion microcombs using CMOS-ready photonics
Authors:
Qing-Xin Ji,
Warren **,
Lue Wu,
Yan Yu,
Zhiquan Yuan,
Wei Zhang,
Maodong Gao,
Bohan Li,
Heming Wang,
Chao Xiang,
Joel Guo,
Avi Feshali,
Mario Paniccia,
Vladimir S. Ilchenko,
Andrey B. Matsko,
John Bowers,
Kerry Vahala
Abstract:
Normal group velocity dispersion (GVD) microcombs offer high comb line power and high pum** efficiency compared to bright pulse microcombs. The recent demonstration of normal GVD microcombs using CMOS-foundry-produced microresonators is an important step towards scalable production. However, the chromatic dispersion of CMOS devices is large and impairs generation of broadband microcombs. Here, w…
▽ More
Normal group velocity dispersion (GVD) microcombs offer high comb line power and high pum** efficiency compared to bright pulse microcombs. The recent demonstration of normal GVD microcombs using CMOS-foundry-produced microresonators is an important step towards scalable production. However, the chromatic dispersion of CMOS devices is large and impairs generation of broadband microcombs. Here, we report the development of a microresonator in which GVD is reduced due to a couple-ring resonator configuration. Operating in the turnkey self-injection-locking mode, the resonator is hybridly integrated with a semiconductor laser pump to produce high-power-efficiency combs spanning a bandwidth of 9.9 nm (1.22 THz) centered at 1560 nm, corresponding to 62 comb lines. Fast, linear optical sampling of the comb waveform is used to observe the rich set of near-zero GVD comb behaviors, including soliton molecules, switching waves (platicons) and their hybrids. Tuning of the 20 GHz repetition rate by electrical actuation enables servo locking to a microwave reference, which simultaneously stabilizes the comb repetition rate, offset frequency and temporal waveform. This hybridly integrated system could be used in coherent communications or for ultra-stable microwave signal generation by two-point optical frequency division.
△ Less
Submitted 26 January, 2023;
originally announced January 2023.
-
Three-dimensional integration enables ultra-low-noise, isolator-free Si photonics
Authors:
Chao Xiang,
Warren **,
Osama Terra,
Bozhang Dong,
Heming Wang,
Lue Wu,
Joel Guo,
Theodore J. Morin,
Eamonn Hughes,
Jonathan Peters,
Qing-Xin Ji,
Avi Feshali,
Mario Paniccia,
Kerry J. Vahala,
John E. Bowers
Abstract:
While photonic integrated circuits (PICs) are being widely used in applications such as telecommunications and datacenter interconnects, PICs capable of replacing bulk optics and fibers in high-precision, highly-coherent applications will require ultra-low-noise laser sources to be integrated with other photonic components in a compact and robustly aligned format -- that is, on a single chip. Such…
▽ More
While photonic integrated circuits (PICs) are being widely used in applications such as telecommunications and datacenter interconnects, PICs capable of replacing bulk optics and fibers in high-precision, highly-coherent applications will require ultra-low-noise laser sources to be integrated with other photonic components in a compact and robustly aligned format -- that is, on a single chip. Such PICs could offer superior scalability for complex functionalities and volume production, as well as improved stability and reliability over time. However, there are two major issues preventing the realization of such envisioned PICs: the high phase noise of semiconductor lasers, and the difficulty of integrating optical isolators directly on chip. PICs are still considered as inferior solutions in optical systems such as microwave synthesizers, optical gyroscopes and atomic clocks, despite their advantages in size, weight, power consumption and cost (SWaPC). Here, we challenge this convention by introducing three-dimensional (3D) integration in silicon photonics that results in ultra-low-noise, isolator-free PICs. Through multiple monolithic and heterogeneous processing sequences, direct on-chip integration of III-V gain and ultra-low-loss (ULL) silicon nitride (SiN) waveguides with optical loss around 0.5 dB/m are demonstrated. Consequently, the demonstrated PIC enters a new regime, such that an integrated ultra-high-Q cavity reduces the laser noise close to that of fiber lasers. Moreover, the cavity acts as an effective block for any downstream on-chip or off-chip reflection-induced destabilization, thus eliminating the need for optical isolators. We further showcase isolator-free, widely-tunable, low-noise, heterodyne microwave generation using two ultra-low-noise lasers on the same silicon chip.
△ Less
Submitted 19 January, 2023;
originally announced January 2023.
-
Chip-Based Laser with 1 Hertz Integrated Linewidth
Authors:
Joel Guo,
Charles A. McLemore,
Chao Xiang,
Dahyeon Lee,
Lue Wu,
Warren **,
Megan Kelleher,
Naijun **,
David Mason,
Lin Chang,
Avi Feshali,
Mario Paniccia,
Peter T. Rakich,
Kerry J. Vahala,
Scott A. Diddams,
Franklyn Quinlan,
John E. Bowers
Abstract:
Lasers with hertz-level linewidths on timescales up to seconds are critical for precision metrology, timekee**, and manipulation of quantum systems. Such frequency stability typically relies on bulk-optic lasers and reference cavities, where increased size is leveraged to improve noise performance, but with the trade-off of cost, hand assembly, and limited application environments. On the other…
▽ More
Lasers with hertz-level linewidths on timescales up to seconds are critical for precision metrology, timekee**, and manipulation of quantum systems. Such frequency stability typically relies on bulk-optic lasers and reference cavities, where increased size is leveraged to improve noise performance, but with the trade-off of cost, hand assembly, and limited application environments. On the other hand, planar waveguide lasers and cavities exploit the benefits of CMOS scalability but are fundamentally limited from achieving hertz-level linewidths at longer times by stochastic noise and thermal sensitivity inherent to the waveguide medium. These physical limits have inhibited the development of compact laser systems with frequency noise required for portable optical clocks that have performance well beyond conventional microwave counterparts. In this work, we break this paradigm to demonstrate a compact, high-coherence laser system at 1548 nm with a 1 s integrated linewidth of 1.1 Hz and fractional frequency instability less than 10$^{-14}$ from 1 ms to 1 s. The frequency noise at 1 Hz offset is suppressed by 11 orders of magnitude from that of the free-running diode laser down to the cavity thermal noise limit near 1 Hz$^2$/Hz, decreasing to 10$^{-3}$ Hz$^2$/Hz at 4 kHz offset. This low noise performance leverages wafer-scale integrated lasers together with an 8 mL vacuum-gap cavity that employs micro-fabricated mirrors with sub-angstrom roughness to yield an optical $Q$ of 11.8 billion. Significantly, all the critical components are lithographically defined on planar substrates and hold the potential for parallel high-volume manufacturing. Consequently, this work provides an important advance towards compact lasers with hertz-level linewidths for applications such as portable optical clocks, low-noise RF photonic oscillators, and related communication and navigation systems.
△ Less
Submitted 30 March, 2022;
originally announced March 2022.
-
High voltage DC gun for high intensity polarized electron source
Authors:
Erdong Wang,
Omer Rahman,
John Skaritka,
Wei Liu,
Jyoti Biswas,
Chrisopher Degen,
Patrick Inacker,
Robert Lambiase,
Matthew Paniccia
Abstract:
The high intensity polarized electron source is a critical component for future nuclear physics facilities. The Electron Ion Collider (EIC) requires a polarized electron gun with higher voltage and higher bunch charge compared to any existing polarized electron source. At Brookhaven National Laboratory, we have built an inverted high voltage direct current (HVDC) photoemission gun with a large cat…
▽ More
The high intensity polarized electron source is a critical component for future nuclear physics facilities. The Electron Ion Collider (EIC) requires a polarized electron gun with higher voltage and higher bunch charge compared to any existing polarized electron source. At Brookhaven National Laboratory, we have built an inverted high voltage direct current (HVDC) photoemission gun with a large cathode size. We report on the performances of GaAs photocathodes in a high gradient with up to a 16 nC bunch charge. The measurements were performed at a stable operating gap voltage of 300 kV - demonstrating outstanding lifetime, and robustness. We observed obvious lifetime enhancement by biasing the anode. The gun also integrated a cathode cooling system for potential application on high current electron sources. The various novel features implemented and demonstrated in this polarized HVDC gun open the door towards future high intensity-high average current electron accelerator facilities.
△ Less
Submitted 6 December, 2021;
originally announced December 2021.
-
High-performance lasers for fully integrated silicon nitride photonics
Authors:
Chao Xiang,
Joel Guo,
Warren **,
Jonathan Peters,
Weiqiang Xie,
Lin Chang,
Boqiang Shen,
Heming Wang,
Qi-Fan Yang,
Lue Wu,
David Kinghorn,
Mario Paniccia,
Kerry J. Vahala,
Paul A. Morton,
John E. Bowers
Abstract:
Silicon nitride (SiN) waveguides with ultra-low optical loss enable integrated photonic applications including low noise, narrow linewidth lasers, chip-scale nonlinear photonics, and microwave photonics. Lasers are key components to SiN photonic integrated circuits (PICs), but are difficult to fully integrate with low-index SiN waveguides due to their large mismatch with the high-index III-V gain…
▽ More
Silicon nitride (SiN) waveguides with ultra-low optical loss enable integrated photonic applications including low noise, narrow linewidth lasers, chip-scale nonlinear photonics, and microwave photonics. Lasers are key components to SiN photonic integrated circuits (PICs), but are difficult to fully integrate with low-index SiN waveguides due to their large mismatch with the high-index III-V gain materials. The recent demonstration of multilayer heterogeneous integration provides a practical solution and enabled the first-generation of lasers fully integrated with SiN waveguides. However a laser with high device yield and high output power at telecommunication wavelengths, where photonics applications are clustered, is still missing, hindered by large mode transition loss, nonoptimized cavity design, and a complicated fabrication process. Here, we report high-performance lasers on SiN with tens of milliwatts output through the SiN waveguide and sub-kHz fundamental linewidth, addressing all of the aforementioned issues. We also show Hertz-level linewidth lasers are achievable with the developed integration techniques. These lasers, together with high-$Q$ SiN resonators, mark a milestone towards a fully-integrated low-noise silicon nitride photonics platform. This laser should find potential applications in LIDAR, microwave photonics and coherent optical communications.
△ Less
Submitted 16 April, 2021;
originally announced April 2021.
-
Self-regulating soliton domain walls in microresonators
Authors:
Heming Wang,
Boqiang Shen,
Yan Yu,
Zhiquan Yuan,
Chengying Bao,
Warren **,
Lin Chang,
Mark A. Leal,
Avi Feshali,
Mario Paniccia,
John E. Bowers,
Kerry Vahala
Abstract:
Dissipative soliton Kerr frequency combs in microresonators have recently been demonstrated with the self-injection locking process. They have the advantage of turnkey deterministic comb generation and simplifying dark soliton generation in the normal dispersion regime. Here, the formation process of dark pulses triggered by self-injection locking is studied by regarding them as a pair of domain w…
▽ More
Dissipative soliton Kerr frequency combs in microresonators have recently been demonstrated with the self-injection locking process. They have the advantage of turnkey deterministic comb generation and simplifying dark soliton generation in the normal dispersion regime. Here, the formation process of dark pulses triggered by self-injection locking is studied by regarding them as a pair of domain walls that connect domains having different intracavity powers. The self-injection locking mechanism allows the domain walls to self-regulate their position so that a wide range of dark comb states can be accessed, and the duty cycle is controlled by the feedback phase. Direct imaging of the dark pulse shape using the electro-optic sampling technique is used to verify the theory. The results provide new physical insights as well as a new operational modality for this important class of nonlinear waves.
△ Less
Submitted 24 November, 2021; v1 submitted 18 March, 2021;
originally announced March 2021.
-
Correlated self-heterodyne method for ultra-low-noise laser linewidth measurements
Authors:
Zhiquan Yuan,
Heming Wang,
Peng Liu,
Bohan Li,
Boqiang Shen,
Maodong Gao,
Lin Chang,
Warren **,
Avi Feshali,
Mario Paniccia,
John Bowers,
Kerry Vahala
Abstract:
Narrow-linewidth lasers are important to many applications spanning precision metrology to sensing systems. Characterization of these lasers requires precise measurements of their frequency noise spectra. Here we demonstrate a correlated self-heterodyne (COSH) method capable of measuring frequency noise as low as 0.01 Hz$^2$/Hz at 1 MHz offset frequency. The measurement setup is characterized by b…
▽ More
Narrow-linewidth lasers are important to many applications spanning precision metrology to sensing systems. Characterization of these lasers requires precise measurements of their frequency noise spectra. Here we demonstrate a correlated self-heterodyne (COSH) method capable of measuring frequency noise as low as 0.01 Hz$^2$/Hz at 1 MHz offset frequency. The measurement setup is characterized by both commercial and lab-built lasers, and features low optical power requirements, fast acquisition time and high intensity noise rejection.
△ Less
Submitted 16 June, 2022; v1 submitted 19 October, 2020;
originally announced October 2020.
-
Hertz-linewidth semiconductor lasers using CMOS-ready ultra-high-$Q$ microresonators
Authors:
Warren **,
Qi-Fan Yang,
Lin Chang,
Boqiang Shen,
Heming Wang,
Mark A. Leal,
Lue Wu,
Avi Feshali,
Mario Paniccia,
Kerry J. Vahala,
John E. Bowers
Abstract:
Driven by narrow-linewidth bench-top lasers, coherent optical systems spanning optical communications, metrology and sensing provide unrivalled performance. To transfer these capabilities from the laboratory to the real world, a key missing ingredient is a mass-produced integrated laser with superior coherence. Here, we bridge conventional semiconductor lasers and coherent optical systems using CM…
▽ More
Driven by narrow-linewidth bench-top lasers, coherent optical systems spanning optical communications, metrology and sensing provide unrivalled performance. To transfer these capabilities from the laboratory to the real world, a key missing ingredient is a mass-produced integrated laser with superior coherence. Here, we bridge conventional semiconductor lasers and coherent optical systems using CMOS-foundry-fabricated microresonators with record high $Q$ factor over 260 million and finesse over 42,000. Five orders-of-magnitude noise reduction in the pump laser is demonstrated, and for the first time, fundamental noise below 1 Hz$^2$ Hz$^{-1}$ is achieved in an electrically-pumped integrated laser. Moreover, the same configuration is shown to relieve dispersion requirements for microcomb generation that have handicapped certain nonlinear platforms. The simultaneous realization of record-high $Q$ factor, highly coherent lasers and frequency combs using foundry-based technologies paves the way for volume manufacturing of a wide range of coherent optical systems.
△ Less
Submitted 15 September, 2020;
originally announced September 2020.
-
High brightness CW electron beams from Superconducting RF photoemission gun
Authors:
I. Petrushina,
V. N. Litvinenko,
Y. **g,
J. Ma,
I. Pinayev,
K. Shih,
G. Wang,
Y. H. Wu,
J. C. Brutus,
Z. Altinbas,
A. Di Lieto,
P. Inacker,
J. Jamilkowski,
G. Mahler,
M. Mapes,
T. Miller,
G. Narayan,
M. Paniccia,
T. Roser,
F. Severino,
J. Skaritka,
L. Smart,
K. Smith,
V. Soria,
Y. Than
, et al. (10 additional authors not shown)
Abstract:
CW photoinjectors operating at high accelerating gradients promise to revolutionize many areas of science and applications. They can establish the basis for a new generation of monochromatic X-ray free electron lasers, high brightness hadron beams, or a new generation of microchip production. In this letter we report on the record-performing superconducting RF electron gun with…
▽ More
CW photoinjectors operating at high accelerating gradients promise to revolutionize many areas of science and applications. They can establish the basis for a new generation of monochromatic X-ray free electron lasers, high brightness hadron beams, or a new generation of microchip production. In this letter we report on the record-performing superconducting RF electron gun with $\textrm{CsK}_{2}\textrm{Sb}$ photocathode. The gun is generating high charge electron bunches (up to 10 nC/bunch) and low transverse emittances, while operating for months with a single photocathode. This achievement opens a new era in generating high-power beams with a very high average brightness.
△ Less
Submitted 16 March, 2020; v1 submitted 12 March, 2020;
originally announced March 2020.
-
Penetrating particle ANalyzer (PAN)
Authors:
X. Wu,
G. Ambrosi,
P. Azzarello,
B. Bergmann,
B. Bertucci,
F. Cadoux,
M. Campbell,
M. Duranti,
M. Ionica,
M. Kole,
S. Krucker,
G. Maehlum,
D. Meier,
M. Paniccia,
L. Pinsky,
C. Plainaki,
S. Pospisil,
T. Stein,
P. A. Thonet,
N. Tomassetti,
A. Tykhonov
Abstract:
PAN is a scientific instrument suitable for deep space and interplanetary missions. It can precisely measure and monitor the flux, composition, and direction of highly penetrating particles ($> \sim$100 MeV/nucleon) in deep space, over at least one full solar cycle (~11 years). The science program of PAN is multi- and cross-disciplinary, covering cosmic ray physics, solar physics, space weather an…
▽ More
PAN is a scientific instrument suitable for deep space and interplanetary missions. It can precisely measure and monitor the flux, composition, and direction of highly penetrating particles ($> \sim$100 MeV/nucleon) in deep space, over at least one full solar cycle (~11 years). The science program of PAN is multi- and cross-disciplinary, covering cosmic ray physics, solar physics, space weather and space travel. PAN will fill an observation gap of galactic cosmic rays in the GeV region, and provide precise information of the spectrum, composition and emission time of energetic particle originated from the Sun. The precise measurement and monitoring of the energetic particles is also a unique contribution to space weather studies. PAN will map the flux and composition of penetrating particles, which cannot be shielded effectively, precisely and continuously, providing valuable input for the assessment of the related health risk, and for the development of an adequate mitigation strategy. PAN has the potential to become a standard on-board instrument for deep space human travel.
PAN is based on the proven detection principle of a magnetic spectrometer, but with novel layout and detection concept. It will adopt advanced particle detection technologies and industrial processes optimized for deep space application. The device will require limited mass (~20 kg) and power (~20 W) budget. Dipole magnet sectors built from high field permanent magnet Halbach arrays, instrumented in a modular fashion with high resolution silicon strip detectors, allow to reach an energy resolution better than 10\% for nuclei from H to Fe at 1 GeV/n.
△ Less
Submitted 21 January, 2019; v1 submitted 14 January, 2019;
originally announced January 2019.
-
A crosstalk and non-uniformity correction method for the Compact Space-borne Compton Polarimeter POLAR
Authors:
Hualin Xiao,
Wojtek Hajdas,
Bobing Wu,
Nicolas Produit,
Tianwei Bao,
Tadeusz Batsch,
Ilia Britvich,
Franck Cadoux,
Junying Chai,
Yongwei Dong,
Neal Gauvin,
Minnan Kong,
Siwei Kong,
Dominik K. Rybka,
Catherine Leluc,
Lu Li,
Jiangtao Liu,
Xin Liu,
Radoslaw Marcinkowski,
Mercedes Paniccia,
Martin Pohl,
Divic Rapin,
Aleksandra Rutczynska,
Haoli Shi,
Liming Song
, et al. (11 additional authors not shown)
Abstract:
In spite of extensive observations and numerous theoretical studies in the past decades several key questions related with Gamma-Ray Bursts (GRB) emission mechanisms are still to be answered. Precise detection of the GRB polarization carried out by dedicated instruments can provide new data and be an ultimate tool to unveil their real nature. A novel space-borne Compton polarimeter POLAR onboard t…
▽ More
In spite of extensive observations and numerous theoretical studies in the past decades several key questions related with Gamma-Ray Bursts (GRB) emission mechanisms are still to be answered. Precise detection of the GRB polarization carried out by dedicated instruments can provide new data and be an ultimate tool to unveil their real nature. A novel space-borne Compton polarimeter POLAR onboard the Chinese space station TG2 is designed to measure linear polarization of gamma-rays arriving from GRB prompt emissions. POLAR uses plastics scintillator bars (PS) as gamma-ray detectors and multi-anode photomultipliers (MAPMTs) for readout of the scintillation light. Inherent properties of such detection systems are crosstalk and non-uniformity. The crosstalk smears recorded energy over multiple channels making both non-uniformity corrections and energy calibration more difficult. Rigorous extraction of polarization observable requires to take such effects properly into account. We studied influence of the crosstalk on energy depositions during laboratory measurements with X-ray beams. A relation between genuine and recorded energy was deduced using an introduced model of data analysis. It postulates that both the crosstalk and non-uniformities can be described with a single matrix obtained in calibrations with mono-energetic X- and gamma-rays. Necessary corrections are introduced using matrix based equations allowing for proper evaluation of the measured GRB spectra. Validity of the method was established during dedicated experimental tests. The same approach can be also applied in space utilizing POLAR internal calibration sources. The introduced model is general and with some adjustments well suitable for data analysis from other MAPMT-based instruments.
△ Less
Submitted 30 June, 2016; v1 submitted 16 July, 2015;
originally announced July 2015.
-
The electromagnetic calorimeter of the AMS-02 experiment
Authors:
M. Vecchi,
L. Basara,
G. Bigongiari,
F. Cervelli,
G. Chen,
G. M. Chen,
H. S. Chen,
G. Coignet,
S. Di Falco,
S. Elles,
A. Fiasson,
D. Fougeron,
G. Gallucci,
C. Goy,
M. Incagli,
R. Kossakowki,
V. Lepareur,
Z. H. Li,
M. Maire,
M. Paniccia,
F. Pilo,
S. Rosier-Lees,
X. W. Tang,
C. Vannini,
J. P. Vialle
, et al. (1 additional authors not shown)
Abstract:
The electromagnetic calorimeter (ECAL) of the AMS-02 experiment is a 3-dimensional sampling calorimeter, made of lead and scintillating fibers. The detector allows for a high granularity, with 18 samplings in the longitudinal direction, and 72 sampling in the lateral direction. The ECAL primary goal is to measure the energy of cosmic rays up to few TeV, however, thanks to the fine grained structur…
▽ More
The electromagnetic calorimeter (ECAL) of the AMS-02 experiment is a 3-dimensional sampling calorimeter, made of lead and scintillating fibers. The detector allows for a high granularity, with 18 samplings in the longitudinal direction, and 72 sampling in the lateral direction. The ECAL primary goal is to measure the energy of cosmic rays up to few TeV, however, thanks to the fine grained structure, it can also provide the separation of positrons from protons, in the GeV to TeV region. A direct measurement of high energy photons with accurate energy and direction determination can also be provided.
△ Less
Submitted 1 October, 2012;
originally announced October 2012.