-
Harnessing the power of complex light propagation in multimode fibers for spatially resolved sensing
Authors:
D. L. Smith,
L. V. Nguyen,
M. I. Reja,
E. P. Schartner,
H. Ebendorff-Heidepriem,
D. J. Ottaway,
S. C. Warren-Smith
Abstract:
The propagation of coherent light in multimode optical fibers results in a speckled output that is both complex and sensitive to environmental effects. These properties can be a powerful tool for sensing, as small perturbations lead to significant changes in the output of the fiber. However, the mechanism to encode spatially resolved sensing information into the speckle pattern and the ability to…
▽ More
The propagation of coherent light in multimode optical fibers results in a speckled output that is both complex and sensitive to environmental effects. These properties can be a powerful tool for sensing, as small perturbations lead to significant changes in the output of the fiber. However, the mechanism to encode spatially resolved sensing information into the speckle pattern and the ability to extract this information is thus far unclear. In this paper, we demonstrate that spatially dependent mode coupling is crucial to achieving spatially resolved measurements. We leverage machine learning to quantitatively extract this spatially resolved sensing information from three fiber types with dramatically different characteristics and demonstrate that the fiber with the highest degree of spatially dependent mode coupling provides the greatest accuracy.
△ Less
Submitted 30 October, 2023; v1 submitted 11 August, 2023;
originally announced August 2023.
-
Mitigating stimulated Brillouin scattering in multimode fibers with focused output via wavefront sha**
Authors:
Chun-Wei Chen,
Linh V. Nguyen,
Kabish Wisal,
Shuen Wei,
Stephen C. Warren-Smith,
Ori Henderson-Sapir,
Erik P. Schartner,
Peyman Ahmadi,
Heike Ebendorff-Heidepriem,
A. Douglas Stone,
David J. Ottaway,
Hui Cao
Abstract:
The key challenge for high-power delivery through optical fibers is overcoming nonlinear optical effects. To keep a smooth output beam, most techniques for mitigating optical nonlinearities are restricted to single-mode fibers. Moving out of the single-mode paradigm, we show experimentally that wavefront-sha** of coherent input light that is incident on a highly multimode fiber can increase the…
▽ More
The key challenge for high-power delivery through optical fibers is overcoming nonlinear optical effects. To keep a smooth output beam, most techniques for mitigating optical nonlinearities are restricted to single-mode fibers. Moving out of the single-mode paradigm, we show experimentally that wavefront-sha** of coherent input light that is incident on a highly multimode fiber can increase the power threshold for stimulated Brillouin scattering (SBS) by an order of magnitude, whilst simultaneously controlling the output beam profile. The theory reveals that the suppression of SBS is due to the relative weakness of intermodal scattering compared to intramodal scattering, and to an effective broadening of the Brillouin spectrum under multimode excitation. Our method is efficient, robust, and applicable to continuous waves and pulses. This work points toward a promising route for suppressing detrimental nonlinear effects in optical fibers, which will enable further power scaling of high-power fiber systems for applications to directed energy, remote sensing, and gravitational-wave detection.
△ Less
Submitted 3 May, 2023;
originally announced May 2023.
-
Point Absorber Limits to Future Gravitational-Wave Detectors
Authors:
W. Jia,
H. Yamamoto,
K. Kuns,
A. Effler,
M. Evans,
P. Fritschel,
R. Abbott,
C. Adams,
R. X. Adhikari,
A. Ananyeva,
S. Appert,
K. Arai,
J. S. Areeda,
Y. Asali,
S. M. Aston,
C. Austin,
A. M. Baer,
M. Ball,
S. W. Ballmer,
S. Banagiri,
D. Barker,
L. Barsotti,
J. Bartlett,
B. K. Berger,
J. Betzwieser
, et al. (176 additional authors not shown)
Abstract:
High-quality optical resonant cavities require low optical loss, typically on the scale of parts per million. However, unintended micron-scale contaminants on the resonator mirrors that absorb the light circulating in the cavity can deform the surface thermoelastically, and thus increase losses by scattering light out of the resonant mode. The point absorber effect is a limiting factor in some hig…
▽ More
High-quality optical resonant cavities require low optical loss, typically on the scale of parts per million. However, unintended micron-scale contaminants on the resonator mirrors that absorb the light circulating in the cavity can deform the surface thermoelastically, and thus increase losses by scattering light out of the resonant mode. The point absorber effect is a limiting factor in some high-power cavity experiments, for example, the Advanced LIGO gravitational wave detector. In this Letter, we present a general approach to the point absorber effect from first principles and simulate its contribution to the increased scattering. The achievable circulating power in current and future gravitational-wave detectors is calculated statistically given different point absorber configurations. Our formulation is further confirmed experimentally in comparison with the scattered power in the arm cavity of Advanced LIGO measured by in-situ photodiodes. The understanding presented here provides an important tool in the global effort to design future gravitational wave detectors that support high optical power, and thus reduce quantum noise.
△ Less
Submitted 17 September, 2021;
originally announced September 2021.
-
Modeling circulating cavity fields using the discrete linear canonical transform
Authors:
Alexei A. Ciobanu,
Daniel David Brown,
Peter J. Veitch,
David J. Ottaway
Abstract:
Fabry-Perot cavities are central to many optical measurement systems. In high precision experiments, such as aLIGO and AdV, coupled cavities are often required leading to complex optical dynamics, particularly when optical imperfections are considered. We show, for the first time, that discrete LCTs can be used to compute circulating optical fields for cavities in which the optics have arbitrary a…
▽ More
Fabry-Perot cavities are central to many optical measurement systems. In high precision experiments, such as aLIGO and AdV, coupled cavities are often required leading to complex optical dynamics, particularly when optical imperfections are considered. We show, for the first time, that discrete LCTs can be used to compute circulating optical fields for cavities in which the optics have arbitrary apertures, reflectance and transmittance profiles, and shape. We compare the predictions of LCT models with those of alternative methods. To further highlight the utility of the LCT, we present a case study of point absorbers on the aLIGO mirrors and compare with recently published results.
△ Less
Submitted 7 June, 2021;
originally announced June 2021.
-
LIGOs Quantum Response to Squeezed States
Authors:
L. McCuller,
S. E. Dwyer,
A. C. Green,
Haocun Yu,
L. Barsotti,
C. D. Blair,
D. D. Brown,
A. Effler,
M. Evans,
A. Fernandez-Galiana,
P. Fritschel,
V. V. Frolov,
N. Kijbunchoo,
G. L. Mansell,
F. Matichard,
N. Mavalvala,
D. E. McClelland,
T. McRae,
A. Mullavey,
D. Sigg,
B. J. J. Slagmolen,
M. Tse,
T. Vo,
R. L. Ward,
C. Whittle
, et al. (172 additional authors not shown)
Abstract:
Gravitational Wave interferometers achieve their profound sensitivity by combining a Michelson interferometer with optical cavities, suspended masses, and now, squeezed quantum states of light. These states modify the measurement process of the LIGO, VIRGO and GEO600 interferometers to reduce the quantum noise that masks astrophysical signals; thus, improvements to squeezing are essential to furth…
▽ More
Gravitational Wave interferometers achieve their profound sensitivity by combining a Michelson interferometer with optical cavities, suspended masses, and now, squeezed quantum states of light. These states modify the measurement process of the LIGO, VIRGO and GEO600 interferometers to reduce the quantum noise that masks astrophysical signals; thus, improvements to squeezing are essential to further expand our gravitational view of the universe. Further reducing quantum noise will require both lowering decoherence from losses as well more sophisticated manipulations to counter the quantum back-action from radiation pressure. Both tasks require fully understanding the physical interactions between squeezed light and the many components of km-scale interferometers. To this end, data from both LIGO observatories in observing run three are expressed using frequency-dependent metrics to analyze each detector's quantum response to squeezed states. The response metrics are derived and used to concisely describe physical mechanisms behind squeezing's simultaneous interaction with transverse-mode selective optical cavities and the quantum radiation pressure noise of suspended mirrors. These metrics and related analysis are broadly applicable for cavity-enhanced optomechanics experiments that incorporate external squeezing, and -- for the first time -- give physical descriptions of every feature so far observed in the quantum noise of the LIGO detectors.
△ Less
Submitted 25 May, 2021;
originally announced May 2021.
-
Modal decomposition of complex optical fields using convolutional neural networks
Authors:
Mitchell G. Schiworski,
Daniel D. Brown,
David J. Ottaway
Abstract:
Recent studies have shown convolutional neural networks (CNNs) can be trained to perform modal decomposition using intensity images of optical fields. A fundamental limitation of these techniques is that the modal phases can not be uniquely calculated using a single intensity image. The knowledge of modal phases is crucial for wavefront sensing, alignment and mode matching applications. Heterodyne…
▽ More
Recent studies have shown convolutional neural networks (CNNs) can be trained to perform modal decomposition using intensity images of optical fields. A fundamental limitation of these techniques is that the modal phases can not be uniquely calculated using a single intensity image. The knowledge of modal phases is crucial for wavefront sensing, alignment and mode matching applications. Heterodyne imaging techniques can provide images of the transverse complex amplitude & phase profile of laser beams at high resolutions and frame rates. In this work we train a CNN to perform modal decomposition using simulated heterodyne images, allowing the complete modal phases to be predicted. This is to our knowledge the first machine learning decomposition scheme to utilize complex phase information to perform modal decomposition. We compare our network with a traditional overlap integral & center-of-mass centering algorithm and show that it is both less sensitive to beam centering and on average more accurate.
△ Less
Submitted 17 April, 2021;
originally announced April 2021.
-
Point absorbers in Advanced LIGO
Authors:
Aidan F. Brooks,
Gabriele Vajente,
Hiro Yamamoto,
Rich Abbott,
Carl Adams,
Rana X. Adhikari,
Alena Ananyeva,
Stephen Appert,
Koji Arai,
Joseph S. Areeda,
Yasmeen Asali,
Stuart M. Aston,
Corey Austin,
Anne M. Baer,
Matthew Ball,
Stefan W. Ballmer,
Sharan Banagiri,
David Barker,
Lisa Barsotti,
Jeffrey Bartlett,
Beverly K. Berger,
Joseph Betzwieser,
Dripta Bhattacharjee,
Garilynn Billingsley,
Sebastien Biscans
, et al. (176 additional authors not shown)
Abstract:
Small, highly absorbing points are randomly present on the surfaces of the main interferometer optics in Advanced LIGO. The resulting nano-meter scale thermo-elastic deformations and substrate lenses from these micron-scale absorbers significantly reduces the sensitivity of the interferometer directly though a reduction in the power-recycling gain and indirect interactions with the feedback contro…
▽ More
Small, highly absorbing points are randomly present on the surfaces of the main interferometer optics in Advanced LIGO. The resulting nano-meter scale thermo-elastic deformations and substrate lenses from these micron-scale absorbers significantly reduces the sensitivity of the interferometer directly though a reduction in the power-recycling gain and indirect interactions with the feedback control system. We review the expected surface deformation from point absorbers and provide a pedagogical description of the impact on power build-up in second generation gravitational wave detectors (dual-recycled Fabry-Perot Michelson interferometers). This analysis predicts that the power-dependent reduction in interferometer performance will significantly degrade maximum stored power by up to 50% and hence, limit GW sensitivity, but suggests system wide corrections that can be implemented in current and future GW detectors. This is particularly pressing given that future GW detectors call for an order of magnitude more stored power than currently used in Advanced LIGO in Observing Run 3. We briefly review strategies to mitigate the effects of point absorbers in current and future GW wave detectors to maximize the success of these enterprises.
△ Less
Submitted 25 March, 2021; v1 submitted 14 January, 2021;
originally announced January 2021.
-
Ultrafast 3.5 μm fiber laser
Authors:
Nathaniel Bawden,
Ori Henderson-Sapir,
Stuart D. Jackson,
David J. Ottaway
Abstract:
We report the first mode-locked fiber laser to operate in the femtosecond regime well beyond 3 μm. The laser uses dual-wavelength pum** and non-linear polarisation rotation to produce 3.5 μm wavelength pulses with minimum duration of 580 fs at a repetition rate of 68 MHz. The pulse energy is 3.2 nJ, corresponding to a peak power of 5.5 kW.
We report the first mode-locked fiber laser to operate in the femtosecond regime well beyond 3 μm. The laser uses dual-wavelength pum** and non-linear polarisation rotation to produce 3.5 μm wavelength pulses with minimum duration of 580 fs at a repetition rate of 68 MHz. The pulse energy is 3.2 nJ, corresponding to a peak power of 5.5 kW.
△ Less
Submitted 10 January, 2021;
originally announced January 2021.
-
In-fiber measurement of erbium-doped ZBLAN 4I13/2 state energy transfer parameter
Authors:
Jillian E. Moffatt,
Georgios Tsiminis,
Elizaveta Klantsataya,
Ori Henderson-Sapir,
Barnaby W. Smith,
Nigel A. Spooner,
David J. Ottaway
Abstract:
Erbium-doped ZBLAN is the most commonly used glass for mid-infrared fiber lasers. In this paper we quantify the energy dynamics of the erbium ions which is important for improving the performance of mid infrared fiber lasers. Previous studies have found a discrepancy between the strength of inter-ion energy transfer measured in bulk Er:ZBLAN and the strength required to explain current fiber laser…
▽ More
Erbium-doped ZBLAN is the most commonly used glass for mid-infrared fiber lasers. In this paper we quantify the energy dynamics of the erbium ions which is important for improving the performance of mid infrared fiber lasers. Previous studies have found a discrepancy between the strength of inter-ion energy transfer measured in bulk Er:ZBLAN and the strength required to explain current fiber laser performance. We have measured the energy transfer of the 4I13/2 + 4I13/2 -> 4I15/2 + 4I9/2 energy transfer process directly in a range of fibers for the first time.
△ Less
Submitted 21 August, 2020;
originally announced August 2020.
-
Mode matching error signals using radio-frequency beam shape modulation
Authors:
Alexei A. Ciobanu,
Daniel David Brown,
Peter J. Veitch,
David J. Ottaway
Abstract:
Precise mode matching is needed to maximize performance in coupled cavity interferometers such as Advanced LIGO. In this paper we present a new mode matching sensing scheme that uses a single radio frequency higher order mode sideband and single element photodiodes. It is first order insensitive to misalignment and can serve as an error signal in a closed loop control system for a set of mode matc…
▽ More
Precise mode matching is needed to maximize performance in coupled cavity interferometers such as Advanced LIGO. In this paper we present a new mode matching sensing scheme that uses a single radio frequency higher order mode sideband and single element photodiodes. It is first order insensitive to misalignment and can serve as an error signal in a closed loop control system for a set of mode matching actuators. We also discuss how it may be implemented in Advanced LIGO. The proposed mode matching error signal has been successfully demonstrated on a tabletop experiment, where the error signal increased the mode matching of a beam to a cavity to 99.9%.
△ Less
Submitted 13 August, 2020;
originally announced August 2020.
-
Improving the Robustness of the Advanced LIGO Detectors to Earthquakes
Authors:
Eyal Schwartz,
A Pele,
J Warner,
B Lantz,
J Betzwieser,
K L Dooley,
S Biscans,
M Coughlin,
N Mukund,
R Abbott,
C Adams,
R X Adhikari,
A Ananyeva,
S Appert,
K Arai,
J S Areeda,
Y Asali,
S M Aston,
C Austin,
A M Baer,
M Ball,
S W Ballmer,
S Banagiri,
D Barker,
L Barsotti
, et al. (174 additional authors not shown)
Abstract:
Teleseismic, or distant, earthquakes regularly disrupt the operation of ground--based gravitational wave detectors such as Advanced LIGO. Here, we present \emph{EQ mode}, a new global control scheme, consisting of an automated sequence of optimized control filters that reduces and coordinates the motion of the seismic isolation platforms during earthquakes. This, in turn, suppresses the differenti…
▽ More
Teleseismic, or distant, earthquakes regularly disrupt the operation of ground--based gravitational wave detectors such as Advanced LIGO. Here, we present \emph{EQ mode}, a new global control scheme, consisting of an automated sequence of optimized control filters that reduces and coordinates the motion of the seismic isolation platforms during earthquakes. This, in turn, suppresses the differential motion of the interferometer arms with respect to one another, resulting in a reduction of DARM signal at frequencies below 100\,mHz. Our method greatly improved the interferometers' capability to remain operational during earthquakes, with ground velocities up to 3.9\,$μ\mbox{m/s}$ rms in the beam direction, setting a new record for both detectors. This sets a milestone in seismic controls of the Advanced LIGO detectors' ability to manage high ground motion induced by earthquakes, opening a path for further robust operation in other extreme environmental conditions.
△ Less
Submitted 24 July, 2020;
originally announced July 2020.
-
Mode-locked and tunable fiber laser at the 3.5 $μ$m band using frequency-shifted feedback
Authors:
Ori Henderson-Sapir,
Nathaniel Bawden,
Matthew R. Majewski,
Robert I. Woodward,
David J. Ottaway,
Stuart D. Jackson3
Abstract:
We report on a mid-infrared mode-locked fiber laser that uses an acousto-optic tunable filter to achieve frequency-shifted feedback pulse generation with frequency tuning over a 215 nm range. The laser operates on the 3.5 $μ$m transition in erbium-doped zirconium fluoride-based fiber and utilizes the dual-wavelength pum** scheme. Stable, self-starting mode-locking with a minimum pulse duration o…
▽ More
We report on a mid-infrared mode-locked fiber laser that uses an acousto-optic tunable filter to achieve frequency-shifted feedback pulse generation with frequency tuning over a 215 nm range. The laser operates on the 3.5 $μ$m transition in erbium-doped zirconium fluoride-based fiber and utilizes the dual-wavelength pum** scheme. Stable, self-starting mode-locking with a minimum pulse duration of 53 ps was measured using a two-photon absorption autocorrelator. The longest wavelength demonstrated was 3612 nm and a maximum average power of 208 mW was achieved. This is the longest wavelength rare-earth doped mode-locked fiber laser demonstrated to the best of the authors' knowledge. The broad tunability promises potential uses for environmental sensing applications.
△ Less
Submitted 24 September, 2019;
originally announced September 2019.
-
An optical lock-in camera for advanced gravitational wave interferometers
Authors:
Huy Tuong Cao,
Daniel D. Brown,
Peter Veitch,
David J. Ottaway
Abstract:
Knowledge of the intensity and phase profiles of spectral components in a coherent optical field is critical for a wide range of high-precision optical applications. One of these is interferometric gravitational wave detectors, which rely on such fields for precise control of the experiment. Here we demonstrate a new device, an \textit{optical lock-in camera}, and highlight how they can be used wi…
▽ More
Knowledge of the intensity and phase profiles of spectral components in a coherent optical field is critical for a wide range of high-precision optical applications. One of these is interferometric gravitational wave detectors, which rely on such fields for precise control of the experiment. Here we demonstrate a new device, an \textit{optical lock-in camera}, and highlight how they can be used within a gravitational wave interferometer to directly image fields at a higher spatial and temporal resolution than previously possible. This improvement is achieved using a Pockels cell as a fast optical switch which transforms each pixel on a sCMOS array into an optical lock-in amplifier. We demonstrate that the optical lock-in camera can image fields with 2~Mpx resolution at 10~Hz with a sensitivity of -62~dBc when averaged over 2s.
△ Less
Submitted 10 July, 2019;
originally announced July 2019.
-
Two-Photon Absorption and Saturable Absorption of Mid-IR in Graphene
Authors:
Andrew Malouf,
Ori Henderson-Sapir,
Sze Yun Set,
Shinji Yamashita,
David J. Ottaway
Abstract:
We report on the response of graphene to high intensity mid-IR radiation and show that graphene exhibits saturable absorption and significant two-photon absorption in the spectral region from 1.55 $μ$m to 3.50 $μ$m (0.35 eV to 0.80 eV). We find that the effective modulation depth of multilayer graphene is limited by two-photon absorption which will affect its performance as a laser mode-locking el…
▽ More
We report on the response of graphene to high intensity mid-IR radiation and show that graphene exhibits saturable absorption and significant two-photon absorption in the spectral region from 1.55 $μ$m to 3.50 $μ$m (0.35 eV to 0.80 eV). We find that the effective modulation depth of multilayer graphene is limited by two-photon absorption which will affect its performance as a laser mode-locking element. The measured saturation intensities of femtosecond pulses were found to depend on the third power of photon energy when we combined our results with others reported in literature, while those of longer pulses were found to have a square root dependence.
△ Less
Submitted 30 October, 2018;
originally announced October 2018.
-
Quantum correlation measurements in interferometric gravitational wave detectors
Authors:
D. V. Martynov,
V. V. Frolov,
S. Kandhasamy,
K. Izumi,
H. Miao,
N. Mavalvala,
E. D. Hall,
R. Lanza,
B. P. Abbott,
R. Abbott,
T. D. Abbott,
C. Adams,
R. X. Adhikari,
S. B. Anderson,
A. Ananyeva,
S. Appert,
K. Arai,
S. M. Aston,
S. W. Ballmer,
D. Barker,
B. Barr,
L. Barsotti,
J. Bartlett,
I. Bartos,
J. C. Batch
, et al. (177 additional authors not shown)
Abstract:
Quantum fluctuations in the phase and amplitude quadratures of light set limitations on the sensitivity of modern optical instruments. The sensitivity of the interferometric gravitational wave detectors, such as the Advanced Laser Interferometer Gravitational wave Observatory (LIGO), is limited by quantum shot noise, quantum radiation pressure noise, and a set of classical noises. We show how the…
▽ More
Quantum fluctuations in the phase and amplitude quadratures of light set limitations on the sensitivity of modern optical instruments. The sensitivity of the interferometric gravitational wave detectors, such as the Advanced Laser Interferometer Gravitational wave Observatory (LIGO), is limited by quantum shot noise, quantum radiation pressure noise, and a set of classical noises. We show how the quantum properties of light can be used to distinguish these noises using correlation techniques. Particularly, in the first part of the paper we show estimations of the coating thermal noise and gas phase noise, hidden below the quantum shot noise in the Advanced LIGO sensitivity curve. We also make projections on the observatory sensitivity during the next science runs. In the second part of the paper we discuss the correlation technique that reveals the quantum radiation pressure noise from the background of classical noises and shot noise. We apply this technique to the Advanced LIGO data, collected during the first science run, and experimentally estimate the quantum correlations and quantum radiation pressure noise in the interferometer for the first time.
△ Less
Submitted 10 February, 2017;
originally announced February 2017.
-
Numerical Modeling of 3.5 micron Dual-Wavelength Pumped Erbium Doped Mid-Infrared Fiber Lasers
Authors:
Andrew Malouf,
Ori Henderson-Sapir,
Martin Gorjan,
David J. Ottaway
Abstract:
The performance of mid-infrared erbium doped fiber lasers has dramatically improved in the last few years. In this paper we present a numerical model that provides valuable insight into the dynamics of a dual-wavelength pumped fiber laser that can operate on the 3.5 micron and 2.8 micron bands. This model is a much needed tool for optimizing and understanding the performance of these laser systems…
▽ More
The performance of mid-infrared erbium doped fiber lasers has dramatically improved in the last few years. In this paper we present a numerical model that provides valuable insight into the dynamics of a dual-wavelength pumped fiber laser that can operate on the 3.5 micron and 2.8 micron bands. This model is a much needed tool for optimizing and understanding the performance of these laser systems. Comparisons between simulation and experimental results for three different systems are presented.
△ Less
Submitted 24 June, 2016;
originally announced June 2016.
-
The Sensitivity of the Advanced LIGO Detectors at the Beginning of Gravitational Wave Astronomy
Authors:
D. V. Martynov,
E. D. Hall,
B. P. Abbott,
R. Abbott,
T. D. Abbott,
C. Adams,
R. X. Adhikari,
R. A. Anderson,
S. B. Anderson,
K. Arai,
M. A. Arain,
S. M. Aston,
L. Austin,
S. W. Ballmer,
M. Barbet,
D. Barker,
B. Barr,
L. Barsotti,
J. Bartlett,
M. A. Barton,
I. Bartos,
J. C. Batch,
A. S. Bell,
I. Belopolski,
J. Bergman
, et al. (239 additional authors not shown)
Abstract:
The Laser Interferometer Gravitational Wave Observatory (LIGO) consists of two widely separated 4 km laser interferometers designed to detect gravitational waves from distant astrophysical sources in the frequency range from 10 Hz to 10 kHz. The first observation run of the Advanced LIGO detectors started in September 2015 and ended in January 2016. A strain sensitivity of better than…
▽ More
The Laser Interferometer Gravitational Wave Observatory (LIGO) consists of two widely separated 4 km laser interferometers designed to detect gravitational waves from distant astrophysical sources in the frequency range from 10 Hz to 10 kHz. The first observation run of the Advanced LIGO detectors started in September 2015 and ended in January 2016. A strain sensitivity of better than $10^{-23}/\sqrt{\text{Hz}}$ was achieved around 100 Hz. Understanding both the fundamental and the technical noise sources was critical for increasing the observable volume in the universe. The average distance at which coalescing binary black hole systems with individual masses of 30 $M_\odot$ could be detected was 1.3 Gpc. Similarly, the range for binary neutron star inspirals was about 75 Mpc. With respect to the initial detectors, the observable volume of Universe increased respectively by a factor 69 and 43. These improvements allowed Advanced LIGO to detect the gravitational wave signal from the binary black hole coalescence, known as GW150914.
△ Less
Submitted 10 February, 2018; v1 submitted 1 April, 2016;
originally announced April 2016.
-
Versatile and widely tunable mid-infrared erbium doped ZBLAN fiber laser
Authors:
Ori Henderson-Sapir,
Stuart. D. Jackson,
David. J. Ottaway
Abstract:
We report on a long wavelength emitting rare earth doped fiber laser with emission centered at 3.5 μm and tunable across 450 nm. The longest wavelength emission was 3.78 μm, which is the longest emission from a fiber laser operating at room temperature. In a simple optical arrangement employing dielectric mirrors for feedback, the laser was capable of emitting 1.45 W of near diffraction limited ou…
▽ More
We report on a long wavelength emitting rare earth doped fiber laser with emission centered at 3.5 μm and tunable across 450 nm. The longest wavelength emission was 3.78 μm, which is the longest emission from a fiber laser operating at room temperature. In a simple optical arrangement employing dielectric mirrors for feedback, the laser was capable of emitting 1.45 W of near diffraction limited output power at 3.47 μm. These emission characteristics compliment the emission from quantum cascade lasers and demonstrate how all infrared dual wavelength pum** can be used to access high lying rare earth ion transitions that have previously relied on visible wavelength pum**.
△ Less
Submitted 18 February, 2016;
originally announced February 2016.
-
Calibration of the Advanced LIGO detectors for the discovery of the binary black-hole merger GW150914
Authors:
The LIGO Scientific Collaboration,
B. P. Abbott,
R. Abbott,
T. D. Abbott,
M. R. Abernathy,
K. Ackley,
C. Adams,
P. Addesso,
R. X. Adhikari,
V. B. Adya,
C. Affeldt,
N. Aggarwal,
O. D. Aguiar,
A. Ain,
P. Ajith,
B. Allen,
P. A. Altin,
D. V. Amariutei,
S. B. Anderson,
W. G. Anderson,
K. Arai,
M. C. Araya,
C. C. Arceneaux,
J. S. Areeda,
K. G. Arun
, et al. (702 additional authors not shown)
Abstract:
In Advanced LIGO, detection and astrophysical source parameter estimation of the binary black hole merger GW150914 requires a calibrated estimate of the gravitational-wave strain sensed by the detectors. Producing an estimate from each detector's differential arm length control loop readout signals requires applying time domain filters, which are designed from a frequency domain model of the detec…
▽ More
In Advanced LIGO, detection and astrophysical source parameter estimation of the binary black hole merger GW150914 requires a calibrated estimate of the gravitational-wave strain sensed by the detectors. Producing an estimate from each detector's differential arm length control loop readout signals requires applying time domain filters, which are designed from a frequency domain model of the detector's gravitational-wave response. The gravitational-wave response model is determined by the detector's opto-mechanical response and the properties of its feedback control system. The measurements used to validate the model and characterize its uncertainty are derived primarily from a dedicated photon radiation pressure actuator, with cross-checks provided by optical and radio frequency references. We describe how the gravitational-wave readout signal is calibrated into equivalent gravitational-wave-induced strain and how the statistical uncertainties and systematic errors are assessed. Detector data collected over 38 calendar days, from September 12 to October 20, 2015, contain the event GW150914 and approximately 16 of coincident data used to estimate the event false alarm probability. The calibration uncertainty is less than 10% in magnitude and 10 degrees in phase across the relevant frequency band 20 Hz to 1 kHz.
△ Less
Submitted 28 February, 2017; v1 submitted 11 February, 2016;
originally announced February 2016.