-
Characterization of two-level system noise for microwave kinetic inductance detector comprising niobium film on silicon substrate
Authors:
Yoshinori Sueno,
Shunsuke Honda,
Hiroki Kutsuma,
Satoru Mima,
Chiko Otani,
Shugo Oguri,
Junya Suzuki,
Osamu Tajima
Abstract:
A microwave kinetic inductance detector (MKID) is a cutting-edge superconducting detector. It comprises a resonator circuit constructed with a superconducting film on a dielectric substrate. To expand its field of application, it is important to establish a method to suppress the two-level system (TLS) noise that is caused by the electric fluctuations between the two energy states at the surface o…
▽ More
A microwave kinetic inductance detector (MKID) is a cutting-edge superconducting detector. It comprises a resonator circuit constructed with a superconducting film on a dielectric substrate. To expand its field of application, it is important to establish a method to suppress the two-level system (TLS) noise that is caused by the electric fluctuations between the two energy states at the surface of the substrate. The electric field density can be decreased by expanding the strip width (S) and gap width from the ground plane (W) in the MKID circuit, allowing the suppression of TLS noise. However, this effect has not yet been confirmed for MKIDs made with niobium films on silicon substrates. In this study, we demonstrate its effectiveness for such MKIDs. We expanded the dimension of the circuit from (S, W) = (3.00 $μ$m, 4.00 $μ$m) to (S, W) = (5.00 $μ$m, 23.7 $μ$m), and achieved an increased suppression of 5.5 dB in TLS noise.
△ Less
Submitted 26 January, 2022; v1 submitted 30 September, 2021;
originally announced October 2021.
-
A method to measure superconducting transition temperature of microwave kinetic inductance detector by changing power of readout microwaves
Authors:
Hiroki Kutsuma,
Yoshinori Sueno,
Makoto Hattori,
Satoru Mima,
Shugo Oguri,
Chiko Otani,
Junya Suzuki,
Osamu Tajima
Abstract:
A microwave kinetic inductance detector (MKID) is a cutting-edge superconducting detector, and its principle is based on a superconducting resonator circuit. The superconducting transition temperature (Tc) of the MKID is an important parameter because various MKID characterization parameters depend on it. In this paper, we propose a method to measure the Tc of the MKID by changing the applied powe…
▽ More
A microwave kinetic inductance detector (MKID) is a cutting-edge superconducting detector, and its principle is based on a superconducting resonator circuit. The superconducting transition temperature (Tc) of the MKID is an important parameter because various MKID characterization parameters depend on it. In this paper, we propose a method to measure the Tc of the MKID by changing the applied power of the readout microwaves. A small fraction of the readout power is deposited in the MKID, and the number of quasiparticles in the MKID increases with this power. Furthermore, the quasiparticle lifetime decreases with the number of quasiparticles. Therefore, we can measure the relation between the quasiparticle lifetime and the detector response by rapidly varying the readout power. From this relation, we estimate the intrinsic quasiparticle lifetime. This lifetime is theoretically modeled by Tc, the physical temperature of the MKID device, and other known parameters. We obtain Tc by comparing the measured lifetime with that acquired using the theoretical model. Using an MKID fabricated with aluminum, we demonstrate this method at a 0.3 K operation. The results are consistent with those obtained by Tc measured by monitoring the transmittance of the readout microwaves with the variation in the device temperature. The method proposed in this paper is applicable to other types, such as a hybrid-type MKID.
△ Less
Submitted 15 May, 2020;
originally announced May 2020.
-
A measurement method for responsivity of microwave kinetic inductance detector by changing power of readout microwaves
Authors:
Hiroki Kutsuma,
Makoto Hattori,
Ryo Koyano,
Satoru Mima,
Shugo Oguri,
Chiko Otani,
Tohru Taino,
Osamu Tajima
Abstract:
Superconducting detectors are a modern technology applied in various fields. The microwave kinetic inductance detector (MKID) is one of cutting-edge superconducting detector. It is based on the principle of a superconducting resonator circuit. A radiation entering the MKID breaks the Cooper pairs in the superconducting resonator, and the intensity of the radiation is detected as a variation of the…
▽ More
Superconducting detectors are a modern technology applied in various fields. The microwave kinetic inductance detector (MKID) is one of cutting-edge superconducting detector. It is based on the principle of a superconducting resonator circuit. A radiation entering the MKID breaks the Cooper pairs in the superconducting resonator, and the intensity of the radiation is detected as a variation of the resonant condition. Therefore, calibration of the detector responsivity, i.e., the variation of the resonant phase with respect to the number of Cooper-pair breaks (quasiparticles), is important. We propose a method for responsivity calibration. Microwaves used for the detector readout locally raise the temperature in each resonator, which increases the number of quasiparticles. Since the magnitude of the temperature rise depends on the power of readout microwaves, the number of quasiparticles also depends on the power of microwaves. By changing the power of the readout microwaves, we simultaneously measure the phase difference and lifetime of quasiparticles. We calculate the number of quasiparticles from the measured lifetime and by using a theoretical formula. This measurement yields a relation between the phase response as a function of the number of quasiparticles. We demonstrate this responsivity calibration using the MKID maintained at 285mK. We also confirm consistency between the results obtained using this method and conventional calibration methods in terms of the accuracy.
△ Less
Submitted 8 July, 2019;
originally announced July 2019.
-
Closed-form formulae of hyperbolic metamaterial made by stacked hole-array layers working at terahertz or microwave radiation
Authors:
Piyawath Tapsanit,
Masatsugu Yamashita,
Chiko Otani,
Sriprajak Krongsuk,
Chesta Ruttanapuna
Abstract:
A metamaterial made by stacked hole-array layers known as a fishnet metamaterial behaves as a hyperbolic metamaterial at wavelength much longer than hole-array period. However, the analytical formulae of effective parameters of a fishnet metamaterial have not been reported hindering the design of deep-subwavelength imaging devices using this structure. We report the new closed-form formulae of eff…
▽ More
A metamaterial made by stacked hole-array layers known as a fishnet metamaterial behaves as a hyperbolic metamaterial at wavelength much longer than hole-array period. However, the analytical formulae of effective parameters of a fishnet metamaterial have not been reported hindering the design of deep-subwavelength imaging devices using this structure. We report the new closed-form formulae of effective parameters comprising anisotropic dispersion relation of a fishnet metamaterial working at terahertz or microwave frequency. These effective parameters of a fishnet metamaterial are consistent with those obtained by quasi-full solutions using known effective parameters of a hole-array layer working at frequency below its spoof plasma frequency with the superlattice period much smaller than the hole-array period. We also theoretically demonstrate the deep-subwavelength focusing at λ/83 using the composite structure of a slit-array layer and a fishnet metamaterial. It is found that the focused intensity inside a fishnet metamaterial is several times larger than that without the fishnet metamaterial, but the transmitted intensity is still restricted by large-wavevector difference in air and a fishnet metamaterial. Our effective parameters may aid the next-generation deep-subwavelength imaging devices working at terahertz or microwave radiation.
△ Less
Submitted 12 April, 2017;
originally announced April 2017.
-
Quasi-analytical solutions of hybrid platform and the optimization of highly sensitive thin-film sensors for terahertz radiation
Authors:
Piyawath Tapsanit,
Masatsugu Yamashita,
Teruya Ishihara,
Chiko Otani
Abstract:
We present quasi-analytical solutions (QANS) of hybrid platform (HP) comprising metallic grating (MG) and stacked-dielectric layers for terahertz (THz) radiation. The QANS are validated by finite difference time domain simulation. It is found that the Wood anomalies induce the high-order spoof surface plasmon resonances in the HP. The QANS are applied to optimize new perfect absorber for THz sensi…
▽ More
We present quasi-analytical solutions (QANS) of hybrid platform (HP) comprising metallic grating (MG) and stacked-dielectric layers for terahertz (THz) radiation. The QANS are validated by finite difference time domain simulation. It is found that the Wood anomalies induce the high-order spoof surface plasmon resonances in the HP. The QANS are applied to optimize new perfect absorber for THz sensing of large-area thin film with ultrahigh figure of merit reaching fifth order of magnitude for the film thickness 0.0001p (p: MG period). The first-order Wood's anomaly of the insulator layer and the Fabry-Perot in the slit's cavity account for the resonance of the perfect absorber. The QANS and the new perfect absorber may lead to highly sensitive and practical nano-film refractive index sensor for THz radiation.
△ Less
Submitted 18 July, 2016;
originally announced July 2016.
