-
Characterization of the PADME positron beam for the X17 measurement
Authors:
S. Bertelli,
F. Bossi,
B. Buonomo,
R. De Sangro,
C. Di Giulio,
E. Di Meco,
K. Dimitrova,
D. Domenici,
F. Ferrarotto,
G. Finocchiaro,
L. G. Foggetta,
A. Frankenthal,
M. Garattini,
G. Georgiev,
P. Gianotti,
S. Ivanov,
Sv. Ivanov,
V. Kozhuharov,
E. Leonardi,
E. Long,
M. Mancini,
G. C. Organtini,
M. Raggi,
I. Sarra,
R. Simeonov
, et al. (5 additional authors not shown)
Abstract:
This paper presents a detailed characterization of the positron beam delivered by the Beam Test Facility at Laboratori Nazionali of Frascati to the PADME experiment during Run III, which took place from October to December 2022. It showcases the methodology used to measure the main beam parameters such as the position in space, the absolute momentum scale, the beam energy spread, and its intensity…
▽ More
This paper presents a detailed characterization of the positron beam delivered by the Beam Test Facility at Laboratori Nazionali of Frascati to the PADME experiment during Run III, which took place from October to December 2022. It showcases the methodology used to measure the main beam parameters such as the position in space, the absolute momentum scale, the beam energy spread, and its intensity through a combination of data analysis and Monte Carlo simulations. The results achieved include an absolute precision in the momentum of the beam to within $\sim$ 1-2 MeV$/c$, a relative beam energy spread below 0.25\%, and an absolute precision in the intensity of the beam at the level of 2\% percent.
△ Less
Submitted 12 May, 2024;
originally announced May 2024.
-
Evaluation of the effectiveness of an introductory mechanics Lab with Arduino and smartphone
Authors:
Eugenio Tufino,
Giovanni Organtini
Abstract:
This article describes the reform of a physics undergraduate lab course by introducing new technologies such as Arduino microcontroller and smartphone, to help students experience a more authentic lab experience. This paper outlines the structure of the lab activities and presents findings from pre- and post-course questionnaires, including the E-CLASS survey, completed by participating students.…
▽ More
This article describes the reform of a physics undergraduate lab course by introducing new technologies such as Arduino microcontroller and smartphone, to help students experience a more authentic lab experience. This paper outlines the structure of the lab activities and presents findings from pre- and post-course questionnaires, including the E-CLASS survey, completed by participating students. Some interesting observations about teamwork and equity emerged from these questionnaires, particularly about female students. These results will guide us in designing more effective and equitable lab courses.
△ Less
Submitted 1 November, 2023;
originally announced November 2023.
-
Status and Prospects of PADME
Authors:
Susanna Bertelli,
Fabio Bossi,
Riccardo De Sangro,
Claudio Di Giulio,
Elisa Di Meco,
Danilo Domenici,
Giuseppe Finocchiaro,
Luca Gennaro Foggetta,
Marco Garattini,
Andrea Ghigo,
Paola Gianotti,
Marco Mancini,
Ivano Sarra,
Tommaso Spadaro,
Eleuterio Spiriti,
Clara Taruggi,
Elisabetta Vilucchi,
Venelin Kozhuharov,
Kalina Dimitrova,
Simeon Ivanov,
Svetoslav Ivanov,
Radoslav Simeonov,
Georgi Georgiev,
Fabio Ferrarotto,
Emanuele Leonardi
, et al. (6 additional authors not shown)
Abstract:
The Positron Annihilation to Dark Matter Experiment (PADME) was designed and constructed to search for dark photons ($A'$) in the process $e^+e^-\rightarrowγA'$, using the positron beam at the Beam Test Facility (BTF) at the National Laboratories of Frascati (LNF). Since the observation of an anomalous spectra in internal pair creation decays of nuclei seen by the collaboration at the ATOMKI insti…
▽ More
The Positron Annihilation to Dark Matter Experiment (PADME) was designed and constructed to search for dark photons ($A'$) in the process $e^+e^-\rightarrowγA'$, using the positron beam at the Beam Test Facility (BTF) at the National Laboratories of Frascati (LNF). Since the observation of an anomalous spectra in internal pair creation decays of nuclei seen by the collaboration at the ATOMKI institute, the PADME detector has been modified and a new data-taking run has been undertaken to probe the existance of the so-called ``X17" particle
△ Less
Submitted 15 May, 2023;
originally announced May 2023.
-
Measurement of the cosmic ray flux by an ArduSiPM-based muon telescope in the framework of the Lab2Go project
Authors:
V. Agostini,
B. Arcese,
N. Ascani,
P. Astone,
V. Bocci,
S. Caperna,
F. Casaburo,
A. Cerica,
C. D'Auria,
G. De Bonis,
D. Deda,
F. Di Mauro,
A. Di Vico,
R. Faccini,
L. Frasca,
G. Galuppi,
G. Giovannetti,
F. Iacoangeli,
G. Ludovici,
L. Martone,
B. Marucci,
L. Mizzoni,
A. Moriconi,
G. Organtini,
F. Piacentini
, et al. (4 additional authors not shown)
Abstract:
Whitin Istituto Nazionale di Fisica Nucleare (INFN) outreach activities, the Lab2Go project is of great significance. Its goal is involving high school teachers and students in several laboratory activities, aiming at increasing the weight of experimental contents in teaching and learning. In this article we present the measurement, carried out in the framework of the Lab2Go project, of the cosmic…
▽ More
Whitin Istituto Nazionale di Fisica Nucleare (INFN) outreach activities, the Lab2Go project is of great significance. Its goal is involving high school teachers and students in several laboratory activities, aiming at increasing the weight of experimental contents in teaching and learning. In this article we present the measurement, carried out in the framework of the Lab2Go project, of the cosmic muon flux made by an ArduSiPM-based muon telescope.
△ Less
Submitted 27 February, 2023; v1 submitted 30 January, 2023;
originally announced January 2023.
-
Cross-section measurement of two-photon annihilation in-flight of positrons at $\sqrt{s}=20$ MeV with the PADME detector
Authors:
F. Bossi,
P. Branchini,
B. Buonomo,
V. Capirossi,
A. P. Caricato,
G. Chiodini,
R. De Sangro,
C. Di Giulio,
D. Domenici,
F. Ferrarotto,
G. Finocchiaro,
L. G Foggetta,
A. Frankenthal,
M. Garattini,
G. Georgiev,
F. Giacchino,
P. Gianotti,
S. Ivanov,
Sv. Ivanov,
V. Kozhuharov,
E. Leonardi,
E. Long,
M. Martino,
I. Oceano,
F. Oliva
, et al. (13 additional authors not shown)
Abstract:
The inclusive cross-section of annihilation in flight $e^+e^-\rightarrowγγ$ of 430 MeV positrons with atomic electrons of a thin diamond target has been measured with the PADME detector at the Laboratori Nazionali di Frascati. The two photons produced in the process were detected by an electromagnetic calorimeter made of BGO crystals. This measurement is the first one based on the direct detection…
▽ More
The inclusive cross-section of annihilation in flight $e^+e^-\rightarrowγγ$ of 430 MeV positrons with atomic electrons of a thin diamond target has been measured with the PADME detector at the Laboratori Nazionali di Frascati. The two photons produced in the process were detected by an electromagnetic calorimeter made of BGO crystals. This measurement is the first one based on the direct detection of the photon pair and one of the most precise for positron energies below 1 GeV. This measurement represents a necessary step to search for dark sector particles and mediators weakly coupled to photons and/or electrons with masses ranging from 1 MeV to 20 MeV with PADME. The measurement agrees with the Next to Leading Order QED prediction within the overall 6% uncertainty.
△ Less
Submitted 7 November, 2022; v1 submitted 26 October, 2022;
originally announced October 2022.
-
Dark sector studies with the PADME experiment
Authors:
Anna Paola Caricato,
Maurizio Martino,
Isabella Oceano,
Federica Oliva,
Stefania Spagnolo,
Gabriele Chiodini,
Fabio Bossi,
Riccardo De Sangro,
Claudio Di Giulio,
Danilo Domenici,
Giuseppe Finocchiaro,
Luca Gennaro Foggetta,
Marco Garattini,
Andrea Ghigo,
Federica Giacchino,
Paola Gianotti,
Tommaso Spadaro,
Eletuerio Spiriti,
Clara Taruggi,
Elisabetta Vilucchi,
Venelin Kozhuharov,
Simeon Ivanov,
Svetoslav Ivanov,
Radoslav Simeonov,
Georgi Georgiev
, et al. (13 additional authors not shown)
Abstract:
The Positron Annihilation to Dark Matter Experiment (PADME) uses the positron beam of the DA$Φ$NE Beam-Test Facility, at the Laboratori Nazionali di Frascati (LNF) to search for a Dark Photon $A'$. The search technique studies the missing mass spectrum of single-photon final states in $e^+e^-\rightarrow A'γ$ annihilation in a positron-on-thin-target experiment. This approach facilitates searches f…
▽ More
The Positron Annihilation to Dark Matter Experiment (PADME) uses the positron beam of the DA$Φ$NE Beam-Test Facility, at the Laboratori Nazionali di Frascati (LNF) to search for a Dark Photon $A'$. The search technique studies the missing mass spectrum of single-photon final states in $e^+e^-\rightarrow A'γ$ annihilation in a positron-on-thin-target experiment. This approach facilitates searches for new particles such as long lived Axion-Like-Particles, protophobic X bosons and Dark Higgs. This talk illustrated the scientific program of the experiment and its first physics results. In particular, the measurement of the cross-section of the SM process $e^+e^-\rightarrow γγ$ at $\sqrt{s}$=21 MeV was shown.
△ Less
Submitted 1 May, 2023; v1 submitted 29 September, 2022;
originally announced September 2022.
-
Comparative characterization study of LYSO:Ce crystals for timing applications
Authors:
F. M. Addesa,
P. Barria,
R. Bianco,
M. Campana,
F. Cavallari,
A. Cemmi,
M. Cipriani,
I. Dafinei,
B. ď Orsi,
D. del Re,
M. Diemoz,
G. ď Imperio,
E. Di Marco,
I. Di Sarcina,
M. Enculescu,
E. Longo,
M. T. Lucchini,
F. Marchegiani,
P. Meridiani,
S. Nisi,
G. Organtini,
F. Pandolfi,
R. Paramatti,
V. Pettinacci,
C. Quaranta
, et al. (6 additional authors not shown)
Abstract:
Cerium-doped Lutetium-Yttrium Oxyorthosilicate (LYSO:Ce)is one of the most widely used Cerium-doped Lutetium based scintillation crystals. Initially developed for medical detectors it rapidly became attractive for High Energy Particle Physics (HEP) applications, especially in the frame of high luminosity particle colliders. In this paper, a comprehensive and systematic study of LYSO:Ce (…
▽ More
Cerium-doped Lutetium-Yttrium Oxyorthosilicate (LYSO:Ce)is one of the most widely used Cerium-doped Lutetium based scintillation crystals. Initially developed for medical detectors it rapidly became attractive for High Energy Particle Physics (HEP) applications, especially in the frame of high luminosity particle colliders. In this paper, a comprehensive and systematic study of LYSO:Ce ($[Lu_{(1-x)}Y_x]_2SiO_5$:$Ce$) crystals is presented. It involves for the first time a large number of crystal samples (180) of the same size from a dozen of producers.The study consists of a comparative characterization of LYSO:Ce crystal products available on the market by mechanical, optical and scintillation measurements and aims specifically, to investigate key parameters of timing applications for HEP.
△ Less
Submitted 3 June, 2022; v1 submitted 30 May, 2022;
originally announced May 2022.
-
Commissioning of the PADME experiment with a positron beam
Authors:
P. Albicocco,
R. Assiro,
F. Bossi,
P. Branchini,
B. Buonomo,
V. Capirossi,
E. Capitolo,
C. Capoccia,
A. P. Caricato,
S. Ceravolo,
G. Chiodini,
G. Corradi,
R. De Sangro,
C. Di Giulio,
D. Domenici,
F. Ferrarotto,
S. Fiore,
G. Finocchiaro,
L. G Foggetta,
A. Frankenthal,
M. Garattini,
G. Georgiev,
F. Giacchino,
A. Ghigo,
P. Gianotti
, et al. (31 additional authors not shown)
Abstract:
The PADME experiment is designed to search for a hypothetical dark photon $A^{\prime}$ produced in positron-electron annihilation using a bunched positron beam at the Beam Test Facility of the INFN Laboratori Nazionali di Frascati. The expected sensitivity to the $A^{\prime}$-photon mixing parameter $ε$ is 10$^{-3}$, for $A^{\prime}$ mass $\le$ 23.5 MeV/$c^{2}$ after collecting $\sim 10^{13}$ posi…
▽ More
The PADME experiment is designed to search for a hypothetical dark photon $A^{\prime}$ produced in positron-electron annihilation using a bunched positron beam at the Beam Test Facility of the INFN Laboratori Nazionali di Frascati. The expected sensitivity to the $A^{\prime}$-photon mixing parameter $ε$ is 10$^{-3}$, for $A^{\prime}$ mass $\le$ 23.5 MeV/$c^{2}$ after collecting $\sim 10^{13}$ positrons-on-target.
This paper presents the PADME detector status after commissioning in July 2019. In addition, the software algorithms employed to reconstruct physics objects, such as photons and charged particles, and the calibration procedures adopted are illustrated in detail. The results show that the experimental apparatus reaches the design performance, and is able to identify and measure standard electromagnetic processes, such as positron Bremsstrahlung, electron-positron annihilation into two photons.
△ Less
Submitted 20 July, 2022; v1 submitted 6 May, 2022;
originally announced May 2022.
-
Measurement of fundamental physical quantities in the framework of the Lab2Go project
Authors:
F. Casaburo,
N. Marcelli,
M. Sorbara,
M. Agostinelli,
P. Astone,
F. Baldassarre,
F. Brunori,
S. Crisci,
G. De Bonis,
X. De Lucia,
D. De Pedis,
G. De Valeri,
G. Di Sciascio,
R. Faccini,
J. Falato,
V. Fraietta,
C. Gatto,
S. Guadagnini,
V. Oliviero,
G. Organtini,
V. Passamonti,
F. Piacentini,
N. Ruggiero,
M. Salerno,
S. Sarti
, et al. (1 additional authors not shown)
Abstract:
To establish a closer contact between school and experimental sciences, Sapienza Università di Roma and the Istituto Nazionale di Fisica Nucleare (INFN) launched the Lab2Go project. Lab2Go has the goal of spreading laboratory practice among students and teachers in high schools. In this article, it is presented a measurement, carried out in the framework of the Lab2Go project, of the ratio hc/e wh…
▽ More
To establish a closer contact between school and experimental sciences, Sapienza Università di Roma and the Istituto Nazionale di Fisica Nucleare (INFN) launched the Lab2Go project. Lab2Go has the goal of spreading laboratory practice among students and teachers in high schools. In this article, it is presented a measurement, carried out in the framework of the Lab2Go project, of the ratio hc/e where h, c and e are respectively the Planck constant, the speed of light in the vacuum, and the electric charge.
△ Less
Submitted 28 July, 2022; v1 submitted 30 January, 2022;
originally announced January 2022.
-
Studio di un urto anelastico: una proposta per le Scuole Secondarie di II grado nell'ambito del progetto "Lab2Go"
Authors:
Pia Astone,
Roberto Balaudo,
Fausto Casaburo,
Francesca Cavanna,
Giulia De Bonis,
Riccardo Faccini,
Davide Fallara,
Andrei Grigoruta,
Giovanni Organtini,
Francesco Piacentini,
Francesco Pennazio
Abstract:
When a free falling **-pong ball collides on a horizontal surface, it loses kinetic energy. The ratio between the height reached by the ball after the collision and the initial height is called restitution coefficient. A method to measure it by using a home-made cathetometer was proposed during the Olimpiadi di Fisica 2018. In this paper we show how to measure it also by using the PhyPhox app an…
▽ More
When a free falling **-pong ball collides on a horizontal surface, it loses kinetic energy. The ratio between the height reached by the ball after the collision and the initial height is called restitution coefficient. A method to measure it by using a home-made cathetometer was proposed during the Olimpiadi di Fisica 2018. In this paper we show how to measure it also by using the PhyPhox app and Arduino board.
△ Less
Submitted 14 December, 2021; v1 submitted 19 June, 2021;
originally announced June 2021.
-
Il progetto Lab2Go per la diffusione della pratica laboratoriale nelle Scuole Secondarie di II grado
Authors:
Mirco Andreotti,
Pia Astone,
Donatella Campana,
Antonella Cartoni,
Fausto Casaburo,
Francesca Cavanna,
Gianluigi Cibinetto,
Antonella Dalla Cort,
Giulia De Bonis,
Marta Della Seta,
Francesca Di Mauro,
Giuseppe Di Sciascio,
Riccardo Faccini,
Federica Favino,
Luca Iocchi,
Marcello Lissia,
Giulia Morganti,
Mauro Mancini,
Giovanni Organtini,
Francesco Pennazio,
Francesco Piacentini,
Alina Piras,
Maria Ragosta,
Lorenzo Roberti,
Anna Rita Rossi
, et al. (2 additional authors not shown)
Abstract:
Even if laboratory practice is essential for all scientific branches of knowledge, it is often neglected at High School, due to lack of time and/or resources. To establish a closer contact between school and experimental sciences, the University Sapienza of Roma and the Istituto Nazionale di Fisica Nucleare (INFN) launched the Lab2Go project, with the goal of spreading laboratory practice among st…
▽ More
Even if laboratory practice is essential for all scientific branches of knowledge, it is often neglected at High School, due to lack of time and/or resources. To establish a closer contact between school and experimental sciences, the University Sapienza of Roma and the Istituto Nazionale di Fisica Nucleare (INFN) launched the Lab2Go project, with the goal of spreading laboratory practice among students and teachers in high schools.
△ Less
Submitted 20 November, 2021; v1 submitted 15 June, 2021;
originally announced June 2021.
-
Test beam characterization of sensor prototypes for the CMS Barrel MIP Timing Detector
Authors:
R. Abbott,
A. Abreu,
F. Addesa,
M. Alhusseini,
T. Anderson,
Y. Andreev,
A. Apresyan,
R. Arcidiacono,
M. Arenton,
E. Auffray,
D. Bastos,
L. A. T. Bauerdick,
R. Bellan,
M. Bellato,
A. Benaglia,
M. Benettoni,
R. Bertoni,
M. Besancon,
S. Bharthuar,
A. Bornheim,
E. Brücken,
J. N. Butler,
C. Campagnari,
M. Campana,
R. Carlin
, et al. (174 additional authors not shown)
Abstract:
The MIP Timing Detector will provide additional timing capabilities for detection of minimum ionizing particles (MIPs) at CMS during the High Luminosity LHC era, improving event reconstruction and pileup rejection. The central portion of the detector, the Barrel Timing Layer (BTL), will be instrumented with LYSO:Ce crystals and Silicon Photomultipliers (SiPMs) providing a time resolution of about…
▽ More
The MIP Timing Detector will provide additional timing capabilities for detection of minimum ionizing particles (MIPs) at CMS during the High Luminosity LHC era, improving event reconstruction and pileup rejection. The central portion of the detector, the Barrel Timing Layer (BTL), will be instrumented with LYSO:Ce crystals and Silicon Photomultipliers (SiPMs) providing a time resolution of about 30 ps at the beginning of operation, and degrading to 50-60 ps at the end of the detector lifetime as a result of radiation damage. In this work, we present the results obtained using a 120 GeV proton beam at the Fermilab Test Beam Facility to measure the time resolution of unirradiated sensors. A proof-of-concept of the sensor layout proposed for the barrel region of the MTD, consisting of elongated crystal bars with dimensions of about 3 x 3 x 57 mm$^3$ and with double-ended SiPM readout, is demonstrated. This design provides a robust time measurement independent of the impact point of the MIP along the crystal bar. We tested LYSO:Ce bars of different thickness (2, 3, 4 mm) with a geometry close to the reference design and coupled to SiPMs manufactured by Hamamatsu and Fondazione Bruno Kessler. The various aspects influencing the timing performance such as the crystal thickness, properties of the SiPMs (e.g. photon detection efficiency), and impact angle of the MIP are studied. A time resolution of about 28 ps is measured for MIPs crossing a 3 mm thick crystal bar, corresponding to an MPV energy deposition of 2.6 MeV, and of 22 ps for the 4.2 MeV MPV energy deposition expected in the BTL, matching the detector performance target for unirradiated devices.
△ Less
Submitted 16 July, 2021; v1 submitted 15 April, 2021;
originally announced April 2021.
-
61 ways to measure the height of a building: an introduction to experimental practices
Authors:
Frederic Bouquet,
Giovanni Organtini,
Amel Kolli,
Julien Bobroff
Abstract:
We created an introductory physics activity for undergrad students consisting in measuring by different methods the same physical quantity. It allows to confront students with questions of uncertainty, precision, and model versus theory. The aim was to measure the height of a building using only a smartphone and everyday low-cost equipment. We designed 61 methods to do so and tested most of them.…
▽ More
We created an introductory physics activity for undergrad students consisting in measuring by different methods the same physical quantity. It allows to confront students with questions of uncertainty, precision, and model versus theory. The aim was to measure the height of a building using only a smartphone and everyday low-cost equipment. We designed 61 methods to do so and tested most of them. These methods can be implemented in various pedagogical scenarios, engaging students into a concrete task, outside of the lab, easily set up at almost zero cost.
△ Less
Submitted 19 July, 2021; v1 submitted 22 October, 2020;
originally announced October 2020.
-
Characterisation and performance of the PADME electromagnetic calorimeter
Authors:
P. Albicocco,
J. Alexander,
F. Bossi,
P. Branchini,
B. Buonomo,
C. Capoccia,
E. Capitolo,
G. Chiodini,
A. P. Caricato,
R. de Sangro,
C. Di Giulio,
D. Domenici,
F. Ferrarotto,
G. Finocchiaro,
S. Fiore,
L. G. Foggetta,
A. Frankenthal,
G. Georgiev,
A. Ghigo,
F. Giacchino,
P. Gianotti,
S. Ivanov,
V. Kozhuharov,
E. Leonardi,
B. Liberti
, et al. (20 additional authors not shown)
Abstract:
The PADME experiment at the LNF Beam Test Facility searches for dark photons produced in the annihilation of positrons with the electrons of a fix target. The strategy is to look for the reaction $e^{+}+e^{-}\rightarrow γ+A'$, where $A'$ is the dark photon, which cannot be observed directly or via its decay products. The electromagnetic calorimeter plays a key role in the experiment by measuring t…
▽ More
The PADME experiment at the LNF Beam Test Facility searches for dark photons produced in the annihilation of positrons with the electrons of a fix target. The strategy is to look for the reaction $e^{+}+e^{-}\rightarrow γ+A'$, where $A'$ is the dark photon, which cannot be observed directly or via its decay products. The electromagnetic calorimeter plays a key role in the experiment by measuring the energy and position of the final-state $γ$. The missing four-momentum carried away by the $A'$ can be evaluated from this information and the particle mass inferred. This paper presents the design, construction, and calibration of the PADME's electromagnetic calorimeter. The results achieved in terms of equalisation, detection efficiency and energy resolution during the first phase of the experiment demonstrate the effectiveness of the various tools used to improve the calorimeter performance with respect to earlier prototypes.
△ Less
Submitted 21 October, 2020; v1 submitted 28 July, 2020;
originally announced July 2020.
-
Magnetic fields produced by electric railways
Authors:
Martin Monteiro,
Giovanni Organtini,
Arturo C. Marti
Abstract:
We propose a simple experiment to explore magnetic fields created by electric railways and compare them with a simple model and parameters estimated using easily available information. A pedestrian walking on an overpass above train tracks registers the components of the magnetic field with the built-in magnetometer of a smartphone. The experimental results are successfully compared with a model o…
▽ More
We propose a simple experiment to explore magnetic fields created by electric railways and compare them with a simple model and parameters estimated using easily available information. A pedestrian walking on an overpass above train tracks registers the components of the magnetic field with the built-in magnetometer of a smartphone. The experimental results are successfully compared with a model of the magnetic field of the transmission lines and the local Earth's magnetic field. This experiment, suitable for a field trip, involves several abilities, such as modeling the magnetic field of power lines, looking up reliable information and estimating non-easily accessible quantities.
△ Less
Submitted 5 October, 2020; v1 submitted 11 June, 2020;
originally announced June 2020.
-
For an early introduction of quantum mechanics concepts in physics curriculum
Authors:
Giovanni Organtini
Abstract:
In this paper we suggest to anticipate the introduction of concepts such as quantum state and the operators connected to their transformations well in advance of what is usually done.
In this paper we suggest to anticipate the introduction of concepts such as quantum state and the operators connected to their transformations well in advance of what is usually done.
△ Less
Submitted 30 January, 2019;
originally announced January 2019.
-
A device to safely perform experiments on radioactivity
Authors:
Giovanni Organtini
Abstract:
This paper describes a cost effective and safe device to perform realistic experiments about the physics of radioactivity in classrooms. It can be used to study both $α-$ and $β-$radioactivity as well as $γ-$emitters and shows an extremely realistic behaviour. The device, in the form of a Geiger-Müller tube, was tested during a public lecture and it deceived many people, even among physicists and…
▽ More
This paper describes a cost effective and safe device to perform realistic experiments about the physics of radioactivity in classrooms. It can be used to study both $α-$ and $β-$radioactivity as well as $γ-$emitters and shows an extremely realistic behaviour. The device, in the form of a Geiger-Müller tube, was tested during a public lecture and it deceived many people, even among physicists and teachers.
△ Less
Submitted 5 October, 2018;
originally announced October 2018.
-
Characterization and Performance of PADME's Cherenkov-Based Small-Angle Calorimeter
Authors:
A. Frankenthal,
J. Alexander,
B. Buonomo,
E. Capitolo,
C. Capoccia,
C. Cesarotti,
R. De Sangro,
C. Di Giulio,
F. Ferrarotto,
L. Foggetta,
G. Georgiev,
P. Gianotti,
M. Hunyadi,
V. Kozhuharov,
A. Krasznahorkay,
E. Leonardi,
G. Organtini,
G. Piperno,
M. Raggi,
C. Rella,
A. Saputi,
I. Sarra,
E. Spiriti,
C. Taruggi,
P. Valente
Abstract:
The PADME experiment, at the Laboratori Nazionali di Frascati (LNF), in Italy, will search for invisible decays of the hypothetical dark photon via the process $e^+e^-\rightarrow γA'$, where the $A'$ escapes detection. The dark photon mass range sensitivity in a first phase will be 1 to 24 MeV. We report here on measurement and simulation studies of the performance of the Small-Angle Calorimeter,…
▽ More
The PADME experiment, at the Laboratori Nazionali di Frascati (LNF), in Italy, will search for invisible decays of the hypothetical dark photon via the process $e^+e^-\rightarrow γA'$, where the $A'$ escapes detection. The dark photon mass range sensitivity in a first phase will be 1 to 24 MeV. We report here on measurement and simulation studies of the performance of the Small-Angle Calorimeter, a component of PADME's detector dedicated to rejecting 2- and 3-gamma backgrounds. The crucial requirement is a timing resolution of less than 200 ps, which is satisfied by the choice of PbF$_2$ crystals and the newly released Hamamatsu R13478UV photomultiplier tubes (PMTs). We find a timing resolution of 81 ps (with double-peak separation resolution of 1.8 ns) and a single-crystal energy resolution of 5.7%/$\sqrt{E}$ with light yield of 2.07 photo-electrons per MeV, using 100 to 400 MeV electrons at the Beam Test Facility of LNF. We also propose the investigation of a two-PMT solution coupled to a single PbF$_2$ crystal for higher-energy applications, which has potentially attractive features.
△ Less
Submitted 22 February, 2019; v1 submitted 27 September, 2018;
originally announced September 2018.
-
Response of microchannel plates in ionization mode to single particles and electromagnetic showers
Authors:
A. Yu. Barnyakov,
M. Yu. Barnyakov,
L. Brianza,
F. Cavallari,
M. Cipriani,
V. Ciriolo,
D. del Re,
S. Gelli,
A. Ghezzi,
C. Gotti,
P. Govoni,
A. A. Katcin,
M. Malberti,
A. Martelli,
B. Marzocchi,
P. Meridiani,
G. Organtini,
R. Paramatti,
S. Pigazzini,
F. Preiato,
V. G. Prisekin,
S. Rahatlou,
C. Rovelli,
F. Santanastasio,
T. Tabarelli de Fatis
Abstract:
Hundreds of concurrent collisions per bunch crossing are expected at future hadron colliders. Precision timing calorimetry has been advocated as a way to mitigate the pileup effects and, thanks to their excellent time resolution, microchannel plates (MCPs) are good candidate detectors for this goal. We report on the response of MCPs, used as secondary emission detectors, to single relativistic par…
▽ More
Hundreds of concurrent collisions per bunch crossing are expected at future hadron colliders. Precision timing calorimetry has been advocated as a way to mitigate the pileup effects and, thanks to their excellent time resolution, microchannel plates (MCPs) are good candidate detectors for this goal. We report on the response of MCPs, used as secondary emission detectors, to single relativistic particles and to electromagnetic showers. Several prototypes, with different geometries and characteristics, were exposed to particle beams at the INFN-LNF Beam Test Facility and at CERN. Their time resolution and efficiency are measured for single particles and as a function of the multiplicity of particles. Efficiencies between 50% and 90% to single relativistic particles are reached, and up to 100% in presence of a large number of particles. Time resolutions between 20ps and 30ps are obtained.
△ Less
Submitted 26 July, 2017;
originally announced July 2017.
-
A Ball Pool Model to illustrate the Higgs physics to the public
Authors:
Giovanni Organtini
Abstract:
A simple model is presented to explain the Higgs boson physics to the grand public. The model consists of a children ball pool representing a Universe filled with a certain amount of the Higgs field. The model is suitable for usage as a hands-on tool in scientific exhibits and provides a clear explanation of almost all the aspects of the physics of the Higgs field interaction with other particles.
A simple model is presented to explain the Higgs boson physics to the grand public. The model consists of a children ball pool representing a Universe filled with a certain amount of the Higgs field. The model is suitable for usage as a hands-on tool in scientific exhibits and provides a clear explanation of almost all the aspects of the physics of the Higgs field interaction with other particles.
△ Less
Submitted 20 January, 2017; v1 submitted 29 October, 2016;
originally announced December 2016.
-
Performance of the PADME calorimeter prototype at the DA$Φ$NE BTF
Authors:
M. Raggi,
V. Kozhuharov,
P. Valente,
F. Ferrarotto,
E. Leonardi,
G. Organtini,
L. Tsankov,
G. Georgiev,
J. Alexander,
B. Buonomo,
C. Di Giulio,
L. Foggetta,
G. Piperno
Abstract:
The PADME experiment at the DA$Φ$NE Beam-Test Facility (BTF) aims at searching for invisible decays of the dark photon by measuring the final state missing mass in the process $e^+e^- \to γ+ A'$, with $A'$ undetected. The measurement requires the determination of the 4-momentum of the recoil photon, performed using a homogeneous, highly segmented BGO crystals calorimeter. We report the results of…
▽ More
The PADME experiment at the DA$Φ$NE Beam-Test Facility (BTF) aims at searching for invisible decays of the dark photon by measuring the final state missing mass in the process $e^+e^- \to γ+ A'$, with $A'$ undetected. The measurement requires the determination of the 4-momentum of the recoil photon, performed using a homogeneous, highly segmented BGO crystals calorimeter. We report the results of the test of a 5$\times$5 crystals prototype performed with an electron beam at the BTF in July 2016.
△ Less
Submitted 17 November, 2016;
originally announced November 2016.
-
Performance of a Tungsten-Cerium Fluoride Sampling Calorimeter in High-Energy Electron Beam Tests
Authors:
R. Becker,
L. Bianchini,
G. Dissertori,
L. Djambazov,
M. Donegà,
W. Lustermann,
A. C. Marini,
F. Nessi-Tedaldi,
F. Pandolfi,
M. Peruzzi,
M. Schönenberger,
F. Cavallari,
I. Dafinei,
M. Diemoz,
C. Jorda Lope,
P. Meridiani,
M. Nuccetelli,
R. Paramatti,
F. Pellegrino,
F. Micheli,
G. Organtini,
S. Rahatlou,
L. Soffi,
L. Brianza,
P. Govoni
, et al. (7 additional authors not shown)
Abstract:
A prototype for a sampling calorimeter made out of cerium fluoride crystals interleaved with tungsten plates, and read out by wavelength-shifting fibres, has been exposed to beams of electrons with energies between 20 and 150 GeV, produced by the CERN Super Proton Synchrotron accelerator complex. The performance of the prototype is presented and compared to that of a Geant4 simulation of the appar…
▽ More
A prototype for a sampling calorimeter made out of cerium fluoride crystals interleaved with tungsten plates, and read out by wavelength-shifting fibres, has been exposed to beams of electrons with energies between 20 and 150 GeV, produced by the CERN Super Proton Synchrotron accelerator complex. The performance of the prototype is presented and compared to that of a Geant4 simulation of the apparatus. Particular emphasis is given to the response uniformity across the channel front face, and to the prototype's energy resolution.
△ Less
Submitted 8 June, 2015;
originally announced June 2015.
-
Response of microchannel plates to single particles and to electromagnetic showers
Authors:
L. Brianza,
F. Cavallari,
D. Del Re,
S. Gelli,
A. Ghezzi,
C. Gotti,
P. Govoni,
C. Jorda,
A. Martelli,
B. Marzocchi,
P. Meridiani,
G. Organtini,
R. Paramatti,
S. Pigazzini,
S. Rahatlou,
C. Rovelli,
F. Santanastasio,
T. Tabarelli de Fatis,
N. Trevisani,
[,
Università di Milano Bicocca,
INFN,
Sezione di Milano-Bicocca,
Sapienza - Università di Roma,
INFN
, et al. (1 additional authors not shown)
Abstract:
We report on the response of microchannel plates (MCPs) to single relativistic particles and to electromagnetic showers. Particle detection by means of secondary emission of electrons at the MCP surface has long been proposed and is used extensively in ion time-of-flight mass spectrometers. What has not been investigated in depth is their use to detect the ionizing component of showers. The time r…
▽ More
We report on the response of microchannel plates (MCPs) to single relativistic particles and to electromagnetic showers. Particle detection by means of secondary emission of electrons at the MCP surface has long been proposed and is used extensively in ion time-of-flight mass spectrometers. What has not been investigated in depth is their use to detect the ionizing component of showers. The time resolution of MCPs exceeds anything that has been previously used in calorimeters and, if exploited effectively, could aid in the event reconstruction at high luminosity colliders. Several prototypes of photodetectors with the amplification stage based on MCPs were exposed to cosmic rays and to 491 MeV electrons at the INFN-LNF Beam-Test Facility. The time resolution and the efficiency of the MCPs are measured as a function of the particle multiplicity, and the results used to model the response to high-energy showers.
△ Less
Submitted 10 April, 2015;
originally announced April 2015.
-
IRIDE White Book, An Interdisciplinary Research Infrastructure based on Dual Electron linacs&lasers
Authors:
D. Alesini,
M. Alessandroni,
M. P. Anania,
S. Andreas,
M. Angelone,
A. Arcovito,
F. Arnesano,
M. Artioli,
L. Avaldi,
D. Babusci,
A. Bacci,
A. Balerna,
S. Bartalucci,
R. Bedogni,
M. Bellaveglia,
F. Bencivenga,
M. Benfatto,
S. Biedron,
V. Bocci,
M. Bolognesi,
P. Bolognesi,
R. Boni,
R. Bonifacio,
M. Boscolo,
F. Boscherini
, et al. (189 additional authors not shown)
Abstract:
This report describes the scientific aims and potentials as well as the preliminary technical design of IRIDE, an innovative tool for multi-disciplinary investigations in a wide field of scientific, technological and industrial applications. IRIDE will be a high intensity 'particle factory', based on a combination of a high duty cycle radio-frequency superconducting electron linac and of high ener…
▽ More
This report describes the scientific aims and potentials as well as the preliminary technical design of IRIDE, an innovative tool for multi-disciplinary investigations in a wide field of scientific, technological and industrial applications. IRIDE will be a high intensity 'particle factory', based on a combination of a high duty cycle radio-frequency superconducting electron linac and of high energy lasers. Conceived to provide unique research possibilities for particle physics, for condensed matter physics, chemistry and material science, for structural biology and industrial applications, IRIDE will open completely new research possibilities and advance our knowledge in many branches of science and technology. IRIDE will contribute to open new avenues of discoveries and to address most important riddles: What does matter consist of? What is the structure of proteins that have a fundamental role in life processes? What can we learn from protein structure to improve the treatment of diseases and to design more efficient drugs? But also how does an electronic chip behave under the effect of radiations? How can the heat flow in a large heat exchanger be optimized? The scientific potential of IRIDE is far reaching and justifies the construction of such a large facility in Italy in synergy with the national research institutes and companies and in the framework of the European and international research. It will impact also on R&D work for ILC, FEL, and will be complementarity to other large scale accelerator projects. IRIDE is also intended to be realized in subsequent stages of development depending on the assigned priorities.
△ Less
Submitted 30 July, 2013;
originally announced July 2013.
-
Unveiling the Higgs mechanism to students
Authors:
Giovanni Organtini
Abstract:
In this paper we give the outline of a lecture given to undergraduate students aiming at understanding why physicists are so much interested in the Higgs boson. The lecture has been conceived for students not yet familiar with advanced physics and is suitable for several disciplines, other than physics. The Higgs mechanism is introduced by semi-classical arguments mimicking the basic field theory…
▽ More
In this paper we give the outline of a lecture given to undergraduate students aiming at understanding why physicists are so much interested in the Higgs boson. The lecture has been conceived for students not yet familiar with advanced physics and is suitable for several disciplines, other than physics. The Higgs mechanism is introduced by semi-classical arguments mimicking the basic field theory concepts, assuming the validity of a symmetry principle in the expression of the energy of particles in a classical field. The lecture is divided in two parts: the first, suitable even to high--school students, shows how the mass of a particle results as a dynamical effect due to the interaction between a massless particle and a field (as in the Higgs mechanism). The audience of the second part, much more technical, consists mainly of teachers and university students of disciplines other than physics.
△ Less
Submitted 12 July, 2012; v1 submitted 9 July, 2012;
originally announced July 2012.
-
On the possible connection between inertia and intrinsic angular momenta and its consequences
Authors:
Giovanni Organtini
Abstract:
In this paper we show the consequences of a principle, according to which the dynamics of the Universe must not depend on the number of the particles of which it is composed. The validity of such a principle lead us to the conclusion that inertia and intrinsic angular momenta are deeply interrelated between them. In particular, assuming the principles outlined in the paper, matter must be composed…
▽ More
In this paper we show the consequences of a principle, according to which the dynamics of the Universe must not depend on the number of the particles of which it is composed. The validity of such a principle lead us to the conclusion that inertia and intrinsic angular momenta are deeply interrelated between them. In particular, assuming the principles outlined in the paper, matter must be composed by fermions, all stable bosons must be vectors and massless and no scalar particles can exist in the Universe. We also apply the results to the holographic principle and found established results more naturally with respect to previous approaches as well as new predictions about the Unruh effect.
△ Less
Submitted 17 February, 2011;
originally announced February 2011.
-
Matter and Interactions: a particle physics perspective
Authors:
Giovanni Organtini
Abstract:
In classical mechanics matter and fields are completely separated. Matter interacts with fields. For particle physicists this is not the case. Both matter and fields are represented by particles. Fundamental interactions are mediated by particles exchanged between matter particles. In this paper we explain why particle physicists believe in such a picture, introducing the technique of Feynman diag…
▽ More
In classical mechanics matter and fields are completely separated. Matter interacts with fields. For particle physicists this is not the case. Both matter and fields are represented by particles. Fundamental interactions are mediated by particles exchanged between matter particles. In this paper we explain why particle physicists believe in such a picture, introducing the technique of Feynman diagrams starting from very basic and popular analogies with classical mechanics, making the physics of elementary particles comprehensible even to high school students, the only prerequisite being the knowledge of the conservation of mechanical energy.
△ Less
Submitted 8 February, 2011; v1 submitted 4 February, 2011;
originally announced February 2011.
-
Radiation hardness qualification of PbWO4 scintillation crystals for the CMS Electromagnetic Calorimeter
Authors:
The CMS Electromagnetic Calorimeter Group,
P. Adzic,
N. Almeida,
D. Andelin,
I. Anicin,
Z. Antunovic,
R. Arcidiacono,
M. W. Arenton,
E. Auffray,
S. Argiro,
A. Askew,
S. Baccaro,
S. Baffioni,
M. Balazs,
D. Bandurin,
D. Barney,
L. M. Barone,
A. Bartoloni,
C. Baty,
S. Beauceron,
K. W. Bell,
C. Bernet,
M. Besancon,
B. Betev,
R. Beuselinck
, et al. (245 additional authors not shown)
Abstract:
Ensuring the radiation hardness of PbWO4 crystals was one of the main priorities during the construction of the electromagnetic calorimeter of the CMS experiment at CERN. The production on an industrial scale of radiation hard crystals and their certification over a period of several years represented a difficult challenge both for CMS and for the crystal suppliers. The present article reviews t…
▽ More
Ensuring the radiation hardness of PbWO4 crystals was one of the main priorities during the construction of the electromagnetic calorimeter of the CMS experiment at CERN. The production on an industrial scale of radiation hard crystals and their certification over a period of several years represented a difficult challenge both for CMS and for the crystal suppliers. The present article reviews the related scientific and technological problems encountered.
△ Less
Submitted 21 December, 2009;
originally announced December 2009.
-
A data capture and production management tool for the assembly and construction of the CMS detectors
Authors:
J-M Le Goff,
J-P Vialle,
A Bazan,
T Le Flour,
S Lieunard,
D Rousset,
R McClatchey,
N Baker,
H Heath,
Z Kovacs,
E Leonardi,
G Barone,
G Organtini
Abstract:
The CMS experiment will comprise several very large high resolution detectors for physics. Each detector may be constructed of well over a million parts and will be produced and assembled during the next decade by specialised centres distributed world-wide. Each constituent part of each detector must be accurately measured and tested locally prior to its ultimate assembly and integration in the…
▽ More
The CMS experiment will comprise several very large high resolution detectors for physics. Each detector may be constructed of well over a million parts and will be produced and assembled during the next decade by specialised centres distributed world-wide. Each constituent part of each detector must be accurately measured and tested locally prior to its ultimate assembly and integration in the experimental area at CERN. The CRISTAL project (Concurrent Repository and Information System for Tracking Assembly and production Lifecycles) [1] aims to monitor and control the quality of the production and assembly process to aid in optimising the performance of the physics detectors and to reject unacceptable constituent parts as early as possible in the construction lifecycle. During assembly CRISTAL will capture all the information required for subsequent detector calibration. Distributed instances of Object databases linked via CORBA [2] and with WWW/Java-based query processing are the main technology aspects of CRISTAL.
△ Less
Submitted 18 May, 2001;
originally announced May 2001.
-
Detector Construction Management and Quality Control: Establishing and Using a CRISTAL System
Authors:
J-M. Le Goff,
G. Chevenier,
A. Bazan,
T. Le Flour,
S. Lieunard,
S. Murray,
J-P. Vialle,
N. Baker,
F. Estrella,
Z. Kovacs,
R. McClatchey,
G. Organtini,
S. Bityukov
Abstract:
The CRISTAL (Cooperating Repositories and an Information System for Tracking Assembly Lifecycles) project is delivering a software system to facilitate the management of the engineering data collected at each stage of production of CMS. CRISTAL captures all the physical characteristics of CMS components as each sub-detector is tested and assembled. These data are retained for later use in areas…
▽ More
The CRISTAL (Cooperating Repositories and an Information System for Tracking Assembly Lifecycles) project is delivering a software system to facilitate the management of the engineering data collected at each stage of production of CMS. CRISTAL captures all the physical characteristics of CMS components as each sub-detector is tested and assembled. These data are retained for later use in areas such as detector slow control, calibration and maintenance. CRISTAL must, therefore, support different views onto its data dependent on the role of the user. These data viewpoints are investigated in this paper. In the recent past two CMS Notes have been written about CRISTAL. The first note, CMS 1996/003, detailed the requirements for CRISTAL, its relationship to other CMS software, its objectives and reviewed the technology on which it would be based. CMS 1997/104 explained some important design concepts on which CRISTAL is and showed how CRISTAL integrated the domains of product data man- agement and workflow management. This note explains, through the use of diagrams, how CRISTAL can be established for detector production and used as the information source for analyses, such as calibration and slow controls, carried out by physicists. The reader should consult the earlier CMS Notes and conference papers for technical detail on CRISTAL - this note concentrates on issues surrounding the practical use of the CRISTAL software.
△ Less
Submitted 8 June, 1998;
originally announced June 1998.
-
From Design to Production Control Through the Integration of Engineering Data Management and Workflow Management Systems
Authors:
J-M. Le Goff,
G. Chevenier,
A. Bazan,
T. Le Flour,
S. Lieunard,
S. Murray,
J-P. Vialle,
N. Baker,
F. Estrella,
Z. Kovacs,
R. McClatchey,
G. Organtini,
S. Bityukov
Abstract:
At a time when many companies are under pressure to reduce "times-to-market" the management of product information from the early stages of design through assembly to manufacture and production has become increasingly important. Similarly in the construction of high energy physics devices the collection of (often evolving) engineering data is central to the subsequent physics analysis. Tradition…
▽ More
At a time when many companies are under pressure to reduce "times-to-market" the management of product information from the early stages of design through assembly to manufacture and production has become increasingly important. Similarly in the construction of high energy physics devices the collection of (often evolving) engineering data is central to the subsequent physics analysis. Traditionally in industry design engineers have employed Engineering Data Management Systems (also called Product Data Management Systems) to coordinate and control access to documented versions of product designs. However, these systems provide control only at the collaborative design level and are seldom used beyond design. Workflow management systems, on the other hand, are employed in industry to coordinate and support the more complex and repeatable work processes of the production environment. Commercial workflow products cannot support the highly dynamic activities found both in the design stages of product development and in rapidly evolving workflow definitions. The integration of Product Data Management with Workflow Management can provide support for product development from initial CAD/CAM collaborative design through to the support and optimisation of production workflow activities. This paper investigates this integration and proposes a philosophy for the support of product data throughout the full development and production lifecycle and demonstrates its usefulness in the construction of CMS detectors.
△ Less
Submitted 27 February, 1998; v1 submitted 6 February, 1998;
originally announced February 1998.