-
Estimating the detection of antineutrinos in the future Brazilian neutron source
Authors:
Luiz Paulo de Oliveira
Abstract:
In line with the tradition of employing nuclear reactors for neutrino physics research, we present potential experiments that could be undertaken using the new Brazilian neutron source, the Brazilian Multipurpose Reactor (RMB). This upcoming facility has clearly defined objectives, including the production of radioisotopes for the healthcare system, material irradiation testing, and research using…
▽ More
In line with the tradition of employing nuclear reactors for neutrino physics research, we present potential experiments that could be undertaken using the new Brazilian neutron source, the Brazilian Multipurpose Reactor (RMB). This upcoming facility has clearly defined objectives, including the production of radioisotopes for the healthcare system, material irradiation testing, and research using neutron beams to investigate the micro and mesostructures of various materials. However, we anticipate that the RMB will generate up to $3,500$ antineutrinos daily, potentially expanding the facility's scope to include neutrino physics experiments involving beta and inverse beta reactions. The modern operational conditions of the RMB and its location in the Iperó-Brazil region may also enable neutrino oscillation experiments and the determination of the $θ_{13}$ parameter, as well as support safeguards activities by the International Atomic Energy Agency (IAEA), allowing for the monitoring of nuclear fuel burning cycles and isotope fractions. We discuss the potential utilization of the RMB as an antineutrino source, proposing experiments and addressing associated technical limitations.
△ Less
Submitted 13 May, 2024; v1 submitted 26 March, 2024;
originally announced March 2024.
-
A New Safety Objective for the Calibration of the Intelligent Driver Model
Authors:
Kingsley Adjenughwure,
Arturo Tejada,
Pedro F. V. Oliveira,
Jeroen Hogema,
Gerdien Klunder
Abstract:
The intelligent driver model (IDM) is one of the most widely used car-following (CF) models in recent years. The parameters of this model have been calibrated using real trajectories obtained from naturalistic driving ,driving simulator experiment and drone data. An important aspect of the model calibration process is defining the main objective of the calibration. This objective, influences the o…
▽ More
The intelligent driver model (IDM) is one of the most widely used car-following (CF) models in recent years. The parameters of this model have been calibrated using real trajectories obtained from naturalistic driving ,driving simulator experiment and drone data. An important aspect of the model calibration process is defining the main objective of the calibration. This objective, influences the objective function and the performance measure for the calibration. For example, to calibrate CF models, the objective is usually to minimize the error in measured spacing or speed while important safety aspects of the models such as the collision avoidance mechanisms are ignored. For such models, there is no guarantee that the calibrated parameters will preserve the safety properties of the model since they are not explicitly taken into account. To explicitly account for the safety properties during calibration, this paper proposes a simple objective function which minimizes both the error in the actual measured spacing (as it is currently done) and the error in the dynamic safety spacing (desired minimum gap) derived from the collision free property of the IDM model. The proposed objective function is used to calibrate two variants of the IDM using vehicle trajectories obtained with drone from a Dutch highway. The calibration performance is then compared in terms of the error in actual spacing and time gap. The results show that the proposed safety objective 15 function leads to lower errors in spacing and time gap compared to when minimizing for only spacing and preserves collision property of the IDM.
△ Less
Submitted 6 October, 2023;
originally announced October 2023.
-
Crystallization and refluidization in very-narrow fluidized beds
Authors:
Vinícius Pereira da Silva Oliveira,
Danilo da Silva Borges,
Erick de Moraes Franklin
Abstract:
Fluidization of solid particles by an ascending fluid is frequent in industry because of the high rates of mass and heat transfers achieved. However, in some cases blockages occur and hinder the correct functioning of the fluidized bed. In this paper, we investigate the crystallization (defluidization) and refluidization that take place in very-narrow solid-liquid fluidized beds under steady flow…
▽ More
Fluidization of solid particles by an ascending fluid is frequent in industry because of the high rates of mass and heat transfers achieved. However, in some cases blockages occur and hinder the correct functioning of the fluidized bed. In this paper, we investigate the crystallization (defluidization) and refluidization that take place in very-narrow solid-liquid fluidized beds under steady flow conditions. For that, we carried out experiments where either monodisperse or bidisperse beds were immersed in water flows whose velocities were above those necessary for fluidization, and the ratio between the tube and grain diameters was smaller than 6. For monodisperse beds consisting of regular spheres, we observed that crystallization and refluidization alternate successively along time, which we quantify in terms of macroscopic structures and agitation of individual grains. We found the characteristic times for crystallization, and propose a new macroscopic parameter quantifying the degree of bed agitation. The bidisperse beds consisted of less-regular spheres placed on the bottom of a layer of regular spheres (the latter was identical to the monodisperse beds tested). We measured the changes that macroscopic structures and agitation of grains undergo, and show that the higher agitation in the bottom layer hinders crystallization of the top layer. Our results bring new insights into the dynamics of very-narrow beds, in addition to proposing a way of mitigating defluidization.
△ Less
Submitted 14 September, 2023;
originally announced September 2023.
-
Motor elétrico -- SimuFísica: um aplicativo para o ensino de eletromagnetismo
Authors:
Marco P. M. de Souza,
Sidnei P. Oliveira,
Valdenice L. Luiz
Abstract:
In this work, we present the Electric Motor simulator, an application on the SimuFísica platform intended for use in the classroom. We briefly describe the technologies behind the application, the equations that govern its operation, some studies showing the dynamics of the electric motor and, finally, examples of approach in the classroom.
--
Apresentamos neste trabalho o simulador Motor elét…
▽ More
In this work, we present the Electric Motor simulator, an application on the SimuFísica platform intended for use in the classroom. We briefly describe the technologies behind the application, the equations that govern its operation, some studies showing the dynamics of the electric motor and, finally, examples of approach in the classroom.
--
Apresentamos neste trabalho o simulador Motor elétrico, um aplicativo da plataforma SimuFísica voltado para uso em sala de aula. Descrevemos brevemente as tecnologias por trás do aplicativo, as equações que regem o seu funcionamento, alguns estudos mostrando a dinâmica do motor elétrico e, por fim, exemplos de abordagem em sala de aula.
△ Less
Submitted 15 June, 2023;
originally announced June 2023.
-
HydroPol2D -- Distributed Hydrodynamic and Water Quality Model: Challenges and Opportunities in Poorly-Gauged Catchments
Authors:
Marcus Nóbrega Gomes Jr.,
César Ambrogi Ferreira do Lago,
Luis Miguel Castillo Rápalo,
Paulo Tarso S. Oliveira,
Marcio Hofheinz Giacomoni,
Eduardo Mario Mendiondo
Abstract:
Floods are one of the deadliest natural hazards and are fueled by excessive urbanization. Urban development decreases infiltration by reducing pervious areas and increases the accumulation of pollutants during dry weather. During wet weather events, there is an increase in the levels of pollution concentrations and stormwater runoff that eventually reach creeks and rivers. Polluted stormwater runo…
▽ More
Floods are one of the deadliest natural hazards and are fueled by excessive urbanization. Urban development decreases infiltration by reducing pervious areas and increases the accumulation of pollutants during dry weather. During wet weather events, there is an increase in the levels of pollution concentrations and stormwater runoff that eventually reach creeks and rivers. Polluted stormwater runoff may be sources of water supply. Modeling the quantity and quality dynamics of stormwater runoff requires a coupled hydrodynamic module capable of estimating the transport and fate of pollutants. In this paper, we evaluate the applicability of a distributed hydrodynamic model coupled with a water quality model (HydroPol2D). First, the model is compared to GSSHA and WCA2D in the V-Tilted catchment, and the limitation of the critical velocity of WCA2D is investigated. We also applied the model in a laboratory wooden board catchment, focusing on the validation of the numerical approach to simulate water quality dynamics. Then, we apply HydroPol2D in the Tijuco Preto catchment, in Sao Carlos - Brazil, and compare the modeling results with the full momentum solver of the Hydrologic Engineering Center - River System Analysis (HEC-RAS). The model implementation, the governing equations, and the estimation of input data are discussed, indicating the challenges and opportunities of the application of distributed models in poorly-gauged catchments. For a 1-yr return period of rainfall and antecedent dry days and assuming an uncertainty of $40\%$ in the water quality parameters, the results indicate that the maximum concentration of total suspended solids (TSS), the maximum load and the mass of the pollutant washed in $30\%$ of the volume are, $456~\pm~260~\mathrm{mg.L^{-1}.km^{-2}}$, $\mathrm{2.56 \pm 0.4~kg.s^{-1}.km^{-2}}$, and $\mathrm{89\%~\pm~10\%}$, respectively.
△ Less
Submitted 21 April, 2023;
originally announced April 2023.
-
TREXIO: A File Format and Library for Quantum Chemistry
Authors:
Evgeny Posenitskiy,
Vijay Gopal Chilkuri,
Abdallah Ammar,
Michał Hapka,
Katarzyna Pernal,
Ravindra Shinde,
Edgar Josué Landinez Borda,
Claudia Filippi,
Kosuke Nakano,
Otto Kohulák,
Sandro Sorella,
Pablo de Oliveira Castro,
William Jalby,
Pablo López Rıós,
Ali Alavi,
Anthony Scemama
Abstract:
TREXIO is an open-source file format and library developed for the storage and manipulation of data produced by quantum chemistry calculations. It is designed with the goal of providing a reliable and efficient method of storing and exchanging wave function parameters and matrix elements, making it an important tool for researchers in the field of quantum chemistry. In this work, we present an ove…
▽ More
TREXIO is an open-source file format and library developed for the storage and manipulation of data produced by quantum chemistry calculations. It is designed with the goal of providing a reliable and efficient method of storing and exchanging wave function parameters and matrix elements, making it an important tool for researchers in the field of quantum chemistry. In this work, we present an overview of the TREXIO file format and library. The library consists of a front-end implemented in the C programming language and two different back-ends: a text back-end and a binary back-end utilizing the HDF5 library which enables fast read and write operations. It is compatible with a variety of platforms and has interfaces for the Fortran, Python, and OCaml programming languages. In addition, a suite of tools has been developed to facilitate the use of the TREXIO format and library, including converters for popular quantum chemistry codes and utilities for validating and manipulating data stored in TREXIO files. The simplicity, versatility, and ease of use of TREXIO make it a valuable resource for researchers working with quantum chemistry data.
△ Less
Submitted 30 March, 2023; v1 submitted 28 February, 2023;
originally announced February 2023.
-
Stochastic modeling of a neutron imaging center at the Brazilian Multipurpose Reactor
Authors:
Luiz P. de Oliveira,
Alexandre P. S. Souza,
Frederico A. Genezini,
Adimir dos Santos
Abstract:
Neutron imaging is a non-destructive technique for analyzing a wide class of samples, such as archaeological or industrial material structures. In recent decades, technological advances have had a great impact on the neutron imaging technique, which has meant an evolution from simple radiographs using films (2D) to modern tomography systems with digital processing (3D). The 5 MW research nuclear r…
▽ More
Neutron imaging is a non-destructive technique for analyzing a wide class of samples, such as archaeological or industrial material structures. In recent decades, technological advances have had a great impact on the neutron imaging technique, which has meant an evolution from simple radiographs using films (2D) to modern tomography systems with digital processing (3D). The 5 MW research nuclear reactor IEA-R1, which is located at the Instituto de Pesquisas Energéticas e Nucleares (IPEN) in Brazil, possesses a neutron imaging instrument with $1.0 \times 10^{6}$ $n/cm^{2}s$ in the sample position. IEA-R1 is over 60 years old and the future of neutron science in Brazil, including imaging, will be expanded to a new facility called the Brazilian Multipurpose Reactor (RMB, Portuguese acronym), which will be built soon. The new reactor will house a suite of instruments at the Neutron National Laboratory, including the neutron imaging facility, viz., Neinei. Inspired by recent author's works, we model the Neinei instrument through stochastic Monte Carlo simulations. We investigate the sensitivity of the neutron imaging technique parameter ($L/D$ ratio) with the neutron flux, and the results are compared to data from the Neutra (PSI), Antares (FRM II), BT2 (NIST) and DINGO (OPAL) instruments. The results are promising and provide avenues for future improvements.
△ Less
Submitted 21 February, 2024; v1 submitted 15 August, 2022;
originally announced August 2022.
-
Simulating Araponga -- The High-Resolution Diffractometer of Brazilian Multipurpose Reactor
Authors:
Alexandre P. S. Souza,
Luiz P. de Oliveira,
Frederico A. Genezini,
Adimir dos Santos
Abstract:
The Brazilian Multipurpose Reactor (RMB) is a fundamental project that aims to turn Brazil into a self-sufficient country in the production of radioisotopes and radiopharmaceuticals to supply the Unified Health System (SUS) as much as the private institutions. In addition, the RMB project describes other applications as irradiation and testing of nuclear fuels and structural material analysis, for…
▽ More
The Brazilian Multipurpose Reactor (RMB) is a fundamental project that aims to turn Brazil into a self-sufficient country in the production of radioisotopes and radiopharmaceuticals to supply the Unified Health System (SUS) as much as the private institutions. In addition, the RMB project describes other applications as irradiation and testing of nuclear fuels and structural material analysis, for instance. There are many techniques in the project to study structural aspects of materials, where neutron diffraction represents one of the priorities for implementation. This technique will take place mainly on two diffractometers on Thermal Neutron Guide 1 (TG1), namely Araponga, a high-resolution diffractometer, and Flautim, a high-intensity diffractometer. In this work, we study the performance of the Araponga diffractometer through McStas simulations with input produced by the MCNP code of the RMB core. We investigate the neutron flux values considering a state-of-art high-resolution diffractometer, and the results are promising since some simulated scenarios present values compatible with high-intensity devices.
△ Less
Submitted 28 December, 2022; v1 submitted 27 March, 2022;
originally announced March 2022.
-
Observation and modelling of Stimulated Raman Scattering driven by an optically smoothed laser beam in experimental conditions relevant for Shock Ignition
Authors:
G. Cristoforetti,
S. Huller,
P. Koester,
L. Antonelli,
S. Atzeni,
F. Baffigi,
D. Batani,
C. Baird,
N. Booth,
M. Galimberti,
K. Glize,
A. Heron,
M. Khan,
P. Loiseau,
D. Mancelli,
M. Notley,
P. Oliveira,
O. Renner,
M. Smid,
A. Schiavi,
G. Tran,
N. C. Woolsey,
L. A. Gizzi
Abstract:
We report results and modelling of an experiment performed at the TAW Vulcan laser facility, aimed at investigating laser-plasma interaction in conditions which are of interest for the Shock Ignition scheme to Inertial Confinement Fusion, i.e. laser intensity higher than 10^16 W/cm2 im**ing on a hot (T > 1 keV), inhomogeneous and long scalelength preformed plasma. Measurements show a significant…
▽ More
We report results and modelling of an experiment performed at the TAW Vulcan laser facility, aimed at investigating laser-plasma interaction in conditions which are of interest for the Shock Ignition scheme to Inertial Confinement Fusion, i.e. laser intensity higher than 10^16 W/cm2 im**ing on a hot (T > 1 keV), inhomogeneous and long scalelength preformed plasma. Measurements show a significant SRS backscattering (4 - 20% of laser energy) driven at low plasma densities and no signatures of TPD/SRS driven at the quarter critical density region. Results are satisfactorily reproduced by an analytical model accounting for the convective SRS growth in independent laser speckles, in conditions where the reflectivity is dominated by the contribution from the most intense speckles, where SRS gets saturated. Analytical and kinetic simulations well reproduce the onset of SRS at low plasma densities in a regime strongly affected by non linear Landau dam** and by filamentation of the most intense laser speckles. The absence of TPD/SRS at higher densities is explained by pump depletion and plasma smoothing driven by filamentation. The prevalence of laser coupling in the low density profile justifies the low temperature measured for hot electrons (7 - 12 keV), well reproduced by numerical simulations.
△ Less
Submitted 30 August, 2021;
originally announced August 2021.
-
Monte Carlo simulations of the S-shaped neutron guides with asymmetric concave and convex surface coatings
Authors:
Alexandre P. S. Souza,
Luiz P. de Oliveira,
Frederico A. Genezini
Abstract:
During the last decades, neutron beam transportation has been a well-known and established subject for designing proper neutron guides. However, sometimes unusual adaptation or adjustments are required out of original projects and after operation beginning of facilities. Inter-center transferring of instrument locations also requires a new approach that is not necessarily described in the literatu…
▽ More
During the last decades, neutron beam transportation has been a well-known and established subject for designing proper neutron guides. However, sometimes unusual adaptation or adjustments are required out of original projects and after operation beginning of facilities. Inter-center transferring of instrument locations also requires a new approach that is not necessarily described in the literature. Inside these situations, the use of S-shaped guides has not been fully discussed in the literature. From a geometrical analysis, we develop a formalism of construction of a minimal S-shaped guide by only considering the exclusion of the Line-of-Sight. We study this guide model through the wavelength cutoff and the neutron transport efficiency analysis. Here, Monte Carlo simulations using MCSTAS software are applied. By intending to optimize these guide systems, simulations of this study also consider scenarios that have different supermirrors. A formalism to determine wavelength cutoff for unique and variable index guide systems is also developed. Simulation results show a good agreement between theoretical and simulated wavelength cutoff values. In addition, we have found specific configurations that combine efficient neutron transport and lower index values on the convex surfaces of curved guides that form the S-shaped guide.
△ Less
Submitted 8 October, 2021; v1 submitted 25 June, 2021;
originally announced June 2021.
-
Long-range correlation studies in deep earthquakes global series
Authors:
Douglas S. R. Ferreira,
Jennifer Ribeiro,
Paulo S. L. Oliveira,
André R. Pimenta,
Renato P. Freitas,
Andrés R. R. Papa
Abstract:
In the present paper we have conducted studies on seismological properties using worldwide data of deep earthquakes (depth larger than 70 km), considering events with magnitude $m \geq 4.5$. We have addressed the problem under the perspective of complex networks, using a time window model to build the networks for deep earthquakes, which present scale-free and small-world features. This work is an…
▽ More
In the present paper we have conducted studies on seismological properties using worldwide data of deep earthquakes (depth larger than 70 km), considering events with magnitude $m \geq 4.5$. We have addressed the problem under the perspective of complex networks, using a time window model to build the networks for deep earthquakes, which present scale-free and small-world features. This work is an extension of a previous study using a similar approach, for shallow events. Our results for deep events corroborate with those found for the shallow ones, since the connectivity distribution for deep earthquakes also follows a q-exponential distribution and the scaling behavior is present. Our results were analysed using both, complex networks and Nonextensive Statistical Mechanics, contributing to strengthen the use of the time window model to construct epicenters networks. They reinforce the idea of long-range correlations between earthquakes and the criticality of the seismological system.
△ Less
Submitted 12 April, 2020;
originally announced April 2020.
-
Prototype of an affordable pressure-controlled emergency mechanical ventilator for COVID-19
Authors:
Américo Pereira,
Luís Lopes,
Paulo Fonte,
Pedro Póvoa,
Telmo G. Santos,
Alberto Martinho,
Ângela Neves,
António Bugalho,
António Gabriel-Santos,
Gonçalo Gaspar Bentes Pimenta,
João Goês,
João Martins,
João Pedro Oliveira,
José Paulo Santos,
Luís C. Gil,
Miguel Onofre Domingues,
Orlando Cunha,
Pedro Pinheiro de Sousa,
Tiago A. Rodrigues,
Valdemar R. Duarte,
Antero Abrunhosa,
António Grilo,
João Agostinho do Nascimento,
Mário Pimenta
Abstract:
We present a viable prototype of a simple mechanical ventilator intended as a last resort to ventilate COVID-19 patients. The prototype implements the pressure-controlled continuous mandatory ventilation mode (PC-CMV) with settable breathing rates, inspiration/expiration time ratios and FiO2 modulation. Although safe, the design aims to minimize the use of technical components and those used are c…
▽ More
We present a viable prototype of a simple mechanical ventilator intended as a last resort to ventilate COVID-19 patients. The prototype implements the pressure-controlled continuous mandatory ventilation mode (PC-CMV) with settable breathing rates, inspiration/expiration time ratios and FiO2 modulation. Although safe, the design aims to minimize the use of technical components and those used are common in industry, so its construction may be possible in times of logistical shortage or disruption or in areas with reduced access to technical materials and at a moderate cost, affordable to lower income countries. Most of the device can be manufactured by modest technical means and construction plans are provided.
△ Less
Submitted 21 July, 2020; v1 submitted 1 April, 2020;
originally announced April 2020.
-
Neutron Guide Building Instruments of the Brazilian Multipurpose Reactor (RMB) Project
Authors:
Alexandre P. S. Souza,
Luiz P. de Oliveira,
Fabiano Yokaichiya,
Frederico A. Genezini,
Margareth K. K. D. Franco
Abstract:
A growing community of scientists has been using neutrons in the most diverse areas of science. In order to meet the researchers demand in the areas of physics, chemistry, materials sciences, engineering, cultural heritage, biology and earth sciences, the Brazilian Multipurpose Reactor (RMB) will provide 3 thermal guides and 3 cold guides, with the installation of several instruments for materials…
▽ More
A growing community of scientists has been using neutrons in the most diverse areas of science. In order to meet the researchers demand in the areas of physics, chemistry, materials sciences, engineering, cultural heritage, biology and earth sciences, the Brazilian Multipurpose Reactor (RMB) will provide 3 thermal guides and 3 cold guides, with the installation of several instruments for materials characterization. In this study, we present a standard design requirement of two primordial instruments, namely Sabiá and Araponga. They are, respectively, cold and thermal neutron instruments and correspond to a Small-Angle Neutron Scattering (SANS) and High-Resolution Powder Neutron Diffractometer (HRPND) to be installed in the Neutron Guide Building (N02) of RMB. To provide adequate flux for both instruments, we propose here an initial investigation of the use of simple and split guides to transport neutron beams to two different instruments on the same guide. For this purpose, we use Monte Carlo simulations utilizing McStas software to check the efficiency of thermal neutron transport for different basic configuration and sources. By considering these results, it is possible to conclude that the split guide configuration is, in most cases, more efficient than cases that use transmitted neutron beams independently of source. We also verify that the employment of different coating indexes for concave and convex surfaces on curved guides is crucial, at least on simulated cases, to optimise neutron flux (intensity and divergence) and diminish facility installation cost.
△ Less
Submitted 11 March, 2020;
originally announced March 2020.
-
Monte Carlo simulations of the S-shaped neutron guide
Authors:
Luiz P. de Oliveira,
Alexandre P. S. Souza,
Fabiano Yokaichiya,
Frederico A. Genezini,
Margareth K. K. D. Franco
Abstract:
Neutron transport along guides is governed by the Liouville theorem and the technology involved has advanced in recent decades. Computer simulations have proven to be useful tools in the design and conception of neutron guide systems in facilities. In this study, we use a Monte Carlo method to perform simulations for an S-shaped neutron guide with different dimensions for a Small-Angle Neutron Sca…
▽ More
Neutron transport along guides is governed by the Liouville theorem and the technology involved has advanced in recent decades. Computer simulations have proven to be useful tools in the design and conception of neutron guide systems in facilities. In this study, we use a Monte Carlo method to perform simulations for an S-shaped neutron guide with different dimensions for a Small-Angle Neutron Scattering (SANS) instrument, through the MCSTAS software. A wavelength cutoff is observed and shown to be dependent on the geometrical parameters of the guide. Results for the neutron flux at sample position are presented and a greater sensitivity of cutoffs concerning the curvatures of the guides than to their lengths is noticed. Our results are in agreement with those obtained from the Acceptance Diagram method and we analyze the beam divergence behavior along the S-shaped guide.
△ Less
Submitted 6 December, 2019;
originally announced December 2019.
-
Magnetic, Structural and cation distribution studies on $FeO \cdot Fe_{(2-x)}Nd_{x}O_{3}$ ($x=0.00, 0.02, 0.04, 0.06 \text{ and } 0.1$) nanoparticles
Authors:
W. W. R. Araujo,
J. F. D. F. Araujo,
C. L. P. Oliveira,
G. E. S. Brito,
A. M. Figueiredo Neto
Abstract:
We synthesized and characterized the colloidal suspensions of $FeO \cdot Fe_{(2-x)}Nd_{x}O_{3}$ nanoparticles with $x=0.00, 0.02, 0.04, 0.06 \text{ and }0.1.$ The effect of the $Fe^{3+}$ ion replacement by $Nd^{3+}$ on the crystal structure is in-depth studied, through X-ray diffraction (XRD) and the obtained cation distribution. The magnetic properties of the synthesized…
▽ More
We synthesized and characterized the colloidal suspensions of $FeO \cdot Fe_{(2-x)}Nd_{x}O_{3}$ nanoparticles with $x=0.00, 0.02, 0.04, 0.06 \text{ and }0.1.$ The effect of the $Fe^{3+}$ ion replacement by $Nd^{3+}$ on the crystal structure is in-depth studied, through X-ray diffraction (XRD) and the obtained cation distribution. The magnetic properties of the synthesized $FeO \cdot Fe_{(2-x)}Nd_{x}O_{3}$ nanoparticles also were investigated and corroborated by other physical methods. A remarkable saturation magnetization of 105 $Am^{2}/kg$ was achieved for $x=0.06$.
△ Less
Submitted 16 July, 2019;
originally announced July 2019.
-
Gas diffusion among bubbles and the DCS risk
Authors:
Oswaldo M. Del Cima,
Paulo C. Oliveira,
Cesar M. Rocha,
Hallan S. Silva,
Alvaro V. N. C. Teixeira
Abstract:
We present some experimental and simulation results that reproduces the Ostwald ripening (gas diffusion among bubbles) for air bubbles in a liquid fluid. Concerning the experiment, there it is measured the time evolution of bubbles mean radius, number of bubbles and radius size distribution. One of the main results shows that, while the number of bubbles decreases in time the bubbles mean radius i…
▽ More
We present some experimental and simulation results that reproduces the Ostwald ripening (gas diffusion among bubbles) for air bubbles in a liquid fluid. Concerning the experiment, there it is measured the time evolution of bubbles mean radius, number of bubbles and radius size distribution. One of the main results shows that, while the number of bubbles decreases in time the bubbles mean radius increases, hence, it follows that the smaller bubbles disappear whereas the -- potentially dangerous for the diver -- larger bubbles grow up. Consequently, this effect suggests a possible contribution of the Ostwald ripening to the decompression sickness, and if so, it should be pursued its implementation to the Reduced Gradient Bubble Model (RGBM) so as to build up dive tables and computer programs for further diving tests.
△ Less
Submitted 24 November, 2017;
originally announced November 2017.
-
Rich or poor: Who should pay higher tax rates?
Authors:
Paulo Murilo Castro de Oliveira
Abstract:
A dynamic agent model is introduced with an annual random wealth multiplicative process followed by taxes paid according to a linear wealth-dependent tax rate. If poor agents pay higher tax rates than rich agents, eventually all wealth becomes concentrated in the hands of a single agent. By contrast, if poor agents are subject to lower tax rates, the economic collective process continues forever.
A dynamic agent model is introduced with an annual random wealth multiplicative process followed by taxes paid according to a linear wealth-dependent tax rate. If poor agents pay higher tax rates than rich agents, eventually all wealth becomes concentrated in the hands of a single agent. By contrast, if poor agents are subject to lower tax rates, the economic collective process continues forever.
△ Less
Submitted 15 November, 2017;
originally announced November 2017.
-
Polymer/2D material nanocomposite manufacturing beyond laboratory frontiers
Authors:
Pablo A. R. Munoz,
Camila F. P. de Oliveira,
Leice G. Amurin,
Camila L. C. Rodriguez,
Danilo A. Nagaoka,
Maria Inês Bruno Tavares,
Sergio H. Domingues,
Ricardo J. E. Andrade,
Guilhermino J. M. Fechine
Abstract:
Polymer nanocomposites based on 2D materials as fillers are the target in the industrial sector, but the ability to manufacture them on a large scale is very limited, and there is a lack of tools to scale up the manufacturing process of these nanocomposites. Here, for the first time, a systematic and fundamental study showing how 2D materials are inserted into the polymeric matrix in order to obta…
▽ More
Polymer nanocomposites based on 2D materials as fillers are the target in the industrial sector, but the ability to manufacture them on a large scale is very limited, and there is a lack of tools to scale up the manufacturing process of these nanocomposites. Here, for the first time, a systematic and fundamental study showing how 2D materials are inserted into the polymeric matrix in order to obtain nanocomposites using conventional and industrially scalable polymer processing machines leading to large-scale manufacturing are described. Two new strategies were used to insert pre-exfoliated 2D material into the polymer matrix, liquid-phase feeder, and solid-solid deposition. Characterizations were beyond micro and nanoscale, allowing the evaluation of the morphology for millimeter samples size. The methodologies described here are extendable to all thermoplastic polymers and 2D materials providing nanocomposites with suitable morphology to obtain singular properties and also triggering the start of the manufacturing process on a large scale.
△ Less
Submitted 5 October, 2017;
originally announced October 2017.
-
Interferometric method for the complete characterization of highly chirped ultrabroadband pulses
Authors:
Adam S Wyatt,
Pedro Oliveira,
Ian O Musgrave
Abstract:
This article describes an interferometric method, called "Chirped Heterodyne Interferometry for Measuring Pulses" (CHIMP), for the complete characterization of highly (monotonically) chirped ultrabroadband optical pulses. CHIMP provides the spectrally dependent group delay dispersion (GDD) of the a chirped test pulse (CTP) via a simple direct algorithm and is verified via second harmonic generatio…
▽ More
This article describes an interferometric method, called "Chirped Heterodyne Interferometry for Measuring Pulses" (CHIMP), for the complete characterization of highly (monotonically) chirped ultrabroadband optical pulses. CHIMP provides the spectrally dependent group delay dispersion (GDD) of the a chirped test pulse (CTP) via a simple direct algorithm and is verified via second harmonic generation (SHG) simulations and experimental measurements of pulses centred at 800nm with a bandwidth of 55nm stretched to 32ps at the 1% intensity level, corresponding to a time-bandwidth product of 830.
△ Less
Submitted 26 December, 2016;
originally announced December 2016.
-
Complex Network Tools to Understand the Behavior of Criminality in Urban Areas
Authors:
Gabriel Spadon,
Lucas C. Scabora,
Marcus V. S. Araujo,
Paulo H. Oliveira,
Bruno B. Machado,
Elaine P. M. Sousa,
Caetano Traina-Jr,
Jose F. Rodrigues-Jr
Abstract:
Complex networks are nowadays employed in several applications. Modeling urban street networks is one of them, and in particular to analyze criminal aspects of a city. Several research groups have focused on such application, but until now, there is a lack of a well-defined methodology for employing complex networks in a whole crime analysis process, i.e. from data preparation to a deep analysis o…
▽ More
Complex networks are nowadays employed in several applications. Modeling urban street networks is one of them, and in particular to analyze criminal aspects of a city. Several research groups have focused on such application, but until now, there is a lack of a well-defined methodology for employing complex networks in a whole crime analysis process, i.e. from data preparation to a deep analysis of criminal communities. Furthermore, the "toolset" available for those works is not complete enough, also lacking techniques to maintain up-to-date, complete crime datasets and proper assessment measures. In this sense, we propose a threefold methodology for employing complex networks in the detection of highly criminal areas within a city. Our methodology comprises three tasks: (i) Map** of Urban Crimes; (ii) Criminal Community Identification; and (iii) Crime Analysis. Moreover, it provides a proper set of assessment measures for analyzing intrinsic criminality of communities, especially when considering different crime types. We show our methodology by applying it to a real crime dataset from the city of San Francisco - CA, USA. The results confirm its effectiveness to identify and analyze high criminality areas within a city. Hence, our contributions provide a basis for further developments on complex networks applied to crime analysis.
△ Less
Submitted 24 December, 2016; v1 submitted 19 December, 2016;
originally announced December 2016.
-
Frequency-resolved optical gating of highly chirped ultrabroadband pulses
Authors:
Adam S Wyatt,
Pedro Oliveira,
Ian O Musgrave
Abstract:
This article describes a simplified reconstruction algorithm for frequency resolved optical gating (FROG) measurements of highly (monotonically) chirped pulses. The FROG traces are calculated using the stationary phase approximation, significantly reducing the data size and convergence time compared to discrete Fourier transform based methods. The method is verified via second harmonic generation…
▽ More
This article describes a simplified reconstruction algorithm for frequency resolved optical gating (FROG) measurements of highly (monotonically) chirped pulses. The FROG traces are calculated using the stationary phase approximation, significantly reducing the data size and convergence time compared to discrete Fourier transform based methods. The method is verified via second harmonic generation FROG simulations and measurements of pulses centred at 800nm with a bandwidth of 55nm stretched to 32ps at the 1% intensity level, corresponding to a time-bandwidth product of 830.
△ Less
Submitted 26 December, 2016; v1 submitted 18 December, 2016;
originally announced December 2016.
-
Characterization of the second- and third-order nonlinear optical susceptibilities of monolayer MoS$_2$ using multiphoton microscopy
Authors:
R. I. Woodward,
R. T. Murray,
C. F. Phelan,
R. E. P. de Oliveira,
T. H. Runcorn,
E. J. R. Kelleher,
S. Li,
E. C. de Oliveira,
G. J. M. Fechine,
G. Eda,
C. J. S. de Matos
Abstract:
We report second- and third-harmonic generation in monolayer MoS$_\mathrm{2}$ as a tool for imaging and accurately characterizing the material's nonlinear optical properties under 1560 nm excitation. Using a surface nonlinear optics treatment, we derive expressions relating experimental measurements to second- and third-order nonlinear sheet susceptibility magnitudes, obtaining values of…
▽ More
We report second- and third-harmonic generation in monolayer MoS$_\mathrm{2}$ as a tool for imaging and accurately characterizing the material's nonlinear optical properties under 1560 nm excitation. Using a surface nonlinear optics treatment, we derive expressions relating experimental measurements to second- and third-order nonlinear sheet susceptibility magnitudes, obtaining values of $|χ_s^{(2)}|=2.0\times10^{-20}$ m$^2$ V$^{-1}$ and for the first time for monolayer MoS$_\mathrm{2}$, $|χ_s^{(3)}|=1.7\times10^{-28}$ m$^3$ V$^{-2}$. These sheet susceptibilities correspond to effective bulk nonlinear susceptibility values of $|χ_{b}^{(2)}|=2.9\times10^{-11}$ m V$^{-1}$ and $|χ_{b}^{(3)}|=2.4\times10^{-19}$ m$^2$ V$^{-2}$, accounting for the sheet thickness. Experimental comparisons between MoS$_\mathrm{2}$ and graphene are also performed, demonstrating $\sim$3.4 times stronger third-order sheet nonlinearity in monolayer MoS$_\mathrm{2}$, highlighting the material's potential for nonlinear photonics in the telecommunications C band.
△ Less
Submitted 15 November, 2016; v1 submitted 26 June, 2016;
originally announced June 2016.
-
Energy degeneracies from Broad Histogram Method and Wang-Landau Sampling
Authors:
Alexandre Pereira Lima,
Paulo Murilo Castro de Oliveira,
Daniel Girardi
Abstract:
In this work, we present a comparative study of the accuracy provided by the Wang-Landau sampling and the Broad Histogram method to estimate de density of states of the two dimensional Ising ferromagnet. The microcanonical averages used to describe the thermodynamic behaviour and to use the Broad Histogram method were obtained using the single spin-flip Wang-Landau sampling, attempting to converge…
▽ More
In this work, we present a comparative study of the accuracy provided by the Wang-Landau sampling and the Broad Histogram method to estimate de density of states of the two dimensional Ising ferromagnet. The microcanonical averages used to describe the thermodynamic behaviour and to use the Broad Histogram method were obtained using the single spin-flip Wang-Landau sampling, attempting to convergence issues and accuracy improvements. We compare the results provided by both techniques with the exact ones for thermodynamic properties and critical exponents. Our results, within the Wang-Landau sampling, reveal that the Broad Histogram approach provides a better description of the density of states for all cases analysed.
△ Less
Submitted 24 May, 2016; v1 submitted 15 April, 2016;
originally announced April 2016.
-
Lid-driven cavity flow of viscoelastic liquids
Authors:
R. G. Sousa,
R. J. Poole,
A. M. Afonso,
F. T. Pinho,
P. J. Oliveira,
A. Morozov,
M. A. Alves
Abstract:
The lid-driven cavity flow is a well-known benchmark problem for the validation of new numerical methods and techniques. In experimental and numerical studies with viscoelastic fluids in such lid-driven flows, purely-elastic instabilities have been shown to appear even at very low Reynolds numbers. A finite-volume viscoelastic code, using the log-conformation formulation, is used in this work to p…
▽ More
The lid-driven cavity flow is a well-known benchmark problem for the validation of new numerical methods and techniques. In experimental and numerical studies with viscoelastic fluids in such lid-driven flows, purely-elastic instabilities have been shown to appear even at very low Reynolds numbers. A finite-volume viscoelastic code, using the log-conformation formulation, is used in this work to probe the effect of viscoelasticity on the appearance of such instabilities in two-dimensional lid-driven cavities for a wide range of aspect ratios (0.125 < height/length < 4.0), at different Deborah numbers under cree**-flow conditions and to understand the effects of regularization of the lid velocity. The effect of the viscoelasticity on the steady-state results and on the critical conditions for the onset of the elastic instabilities are described and compared to experimental results.
△ Less
Submitted 7 March, 2016;
originally announced March 2016.
-
Numerical wind tunnels
Authors:
Paulo Victor Santos Souza,
Paulo Murilo Castro de Oliveira
Abstract:
Flow of viscous fluids are not usually discussed in detail in general and basic courses of physics. This is due in part to the fact that the Navier-Stokes equation has analytical solution only for a few restricted cases, while more sophisticated problems can only be solved by numerical methods. In this text, we present a computer simulation of wind tunnel, i.e., we present a set of programs to sol…
▽ More
Flow of viscous fluids are not usually discussed in detail in general and basic courses of physics. This is due in part to the fact that the Navier-Stokes equation has analytical solution only for a few restricted cases, while more sophisticated problems can only be solved by numerical methods. In this text, we present a computer simulation of wind tunnel, i.e., we present a set of programs to solve the Navier-Stokes equation for an arbitrary object inserted in a wind tunnel. The tunnel enables us to visualize the formation of vortices behind object, the so-called von Kármán vortices, and calculate the drag force on the object. We believe that this numerical wind tunnel can support the teacher and allow a more elaborate discussion of viscous flow. The potential of the tunnel is exemplified by the study of the drag on a simplified model of wing whose angle of attack can be controlled. A link to download the programs that make up the tunnel appears at the end.
△ Less
Submitted 7 December, 2015; v1 submitted 22 September, 2015;
originally announced September 2015.
-
Enhanced Microfluidic Mixing via a Tricritical Spiral Vortex Instability
Authors:
Simon J. Haward,
Robert J. Poole,
Manuel A. Alves,
Paulo J. Oliveira,
Nigel Goldenfeld,
Amy Q. Shen
Abstract:
Experimental measurements and numerical simulations are made on fluid flow through cross-slot devices with a range of aspect (depth:width) ratios, 0.4 < alpha < 3.87. For low Reynolds numbers Re, the flow is symmetric and a sharp boundary exists between fluid streams entering the cross-slot from opposite directions. Above an alpha-dependent critical value Re_c, the flow undergoes a symmetry-breaki…
▽ More
Experimental measurements and numerical simulations are made on fluid flow through cross-slot devices with a range of aspect (depth:width) ratios, 0.4 < alpha < 3.87. For low Reynolds numbers Re, the flow is symmetric and a sharp boundary exists between fluid streams entering the cross-slot from opposite directions. Above an alpha-dependent critical value Re_c, the flow undergoes a symmetry-breaking bifurcation (though remains steady and laminar) and a spiral vortex structure develops about the central axis of the outflow channel. An order parameter characterizing the instability grows according to a sixth-order Landau potential, and shows a progression from second order to first order transitions as alpha increases. A tricritical point occurs for alpha ~ 0.55. The spiral vortex acts as a mixing region in the flow field and this phenomenon can be used to drive enhanced mixing in microfluidic devices.
△ Less
Submitted 3 September, 2015;
originally announced September 2015.
-
Graphene Based Waveguide Polarizers: In-Depth Physical Analysis and Relevant Parameters
Authors:
Rafael E. P. de Oliveira,
Christiano J. S. de Matos
Abstract:
Optical polarizing devices exploiting graphene embedded in waveguides have been demonstrated in the literature recently and both the TE- and TM-pass behaviors were reported. The determination of the passing polarization is usually attributed to graphene's Fermi level (and, therefore, do** level), with, however, no direct confirmation of this assumption provided. Here we show, through numerical s…
▽ More
Optical polarizing devices exploiting graphene embedded in waveguides have been demonstrated in the literature recently and both the TE- and TM-pass behaviors were reported. The determination of the passing polarization is usually attributed to graphene's Fermi level (and, therefore, do** level), with, however, no direct confirmation of this assumption provided. Here we show, through numerical simulation, that rather than graphene's Fermi level, the passing polarization is determined by waveguide parameters, such as the superstrate refractive index and the waveguide's height. The results provide a consistent explanation for experimental results reported in the literature. In addition, we show that with an accurate graphene modeling, a waveguide cannot be switched between TE pass and TM pass via Fermi level tuning. Therefore, the usually overlooked contribution of the waveguide design is shown to be essential for the development of optimized TE- or TM-pass polarizers, which we show to be due to the control it provides on the fraction of the electric field that is tangential to graphene.
△ Less
Submitted 7 October, 2015; v1 submitted 27 May, 2015;
originally announced May 2015.
-
Inflexibility and independence: Phase transitions in the majority-rule model
Authors:
Nuno Crokidakis,
Paulo Murilo Castro de Oliveira
Abstract:
In this work we study opinion formation in a population participating of a public debate with two distinct choices. We considered three distinct mechanisms of social interactions and individuals' behavior: conformity, nonconformity and inflexibility. The conformity is ruled by the majority-rule dynamics, whereas the nonconformity is introduced in the population as an independent behavior, implying…
▽ More
In this work we study opinion formation in a population participating of a public debate with two distinct choices. We considered three distinct mechanisms of social interactions and individuals' behavior: conformity, nonconformity and inflexibility. The conformity is ruled by the majority-rule dynamics, whereas the nonconformity is introduced in the population as an independent behavior, implying the failure to attempted group influence. Finally, the inflexible agents are introduced in the population with a given density. These individuals present a singular behavior, in a way that their stubbornness makes them reluctant to change their opinions. We consider these effects separately and all together, with the aim to analyze the critical behavior of the system. We performed numerical simulations in some lattice structures and for distinct population sizes, and our results suggest that the different formulations of the model undergo order-disorder phase transitions in the same universality class of the Ising model. Some of our results are complemented by analytical calculations.
△ Less
Submitted 19 November, 2015; v1 submitted 19 May, 2015;
originally announced May 2015.
-
Drag force in wind tunnels: a new method
Authors:
P. V. S. Souza,
Daniel Girardi,
P. M. C. de Oliveira
Abstract:
A rigid object of general shape is fixed inside a wind tunnel. The drag force exerted on it by the wind is determined by a new method based on simple basic Physics concepts, provided one has a solver, any solver, for the corresponding dynamic Navier-Stokes equation which determines the wind velocity field around the object. The method is completely general, but here we apply it to the traditional…
▽ More
A rigid object of general shape is fixed inside a wind tunnel. The drag force exerted on it by the wind is determined by a new method based on simple basic Physics concepts, provided one has a solver, any solver, for the corresponding dynamic Navier-Stokes equation which determines the wind velocity field around the object. The method is completely general, but here we apply it to the traditional problem of a long cylinder perpendicular to the wind.
△ Less
Submitted 10 April, 2016; v1 submitted 5 May, 2015;
originally announced May 2015.
-
The first shall be last: selection-driven minority becomes majority
Authors:
Nuno Crokidakis,
Paulo Murilo Castro de Oliveira
Abstract:
Street demonstrations occur across the world. In Rio de Janeiro, June/July 2013, they reach beyond one million people. A wrathful reader of \textit{O Globo}, leading newspaper in the same city, published a letter \cite{OGlobo} where many social questions are stated and answered Yes or No. These million people of street demonstrations share opinion consensus about a similar set of social issues. Bu…
▽ More
Street demonstrations occur across the world. In Rio de Janeiro, June/July 2013, they reach beyond one million people. A wrathful reader of \textit{O Globo}, leading newspaper in the same city, published a letter \cite{OGlobo} where many social questions are stated and answered Yes or No. These million people of street demonstrations share opinion consensus about a similar set of social issues. But they did not reach this consensus within such a huge numbered meetings. Earlier, they have met in diverse small groups where some of them could be convinced to change mind by other few fellows. Suddenly, a macroscopic consensus emerges. Many other big manifestations are widespread all over the world in recent times, and are supposed to remain in the future. The interesting questions are: 1) How a binary-option opinion distributed among some population evolves in time, through local changes occurred within small-group meetings? and 2) Is there some natural selection rule acting upon? Here, we address these questions through an agent-based model.
△ Less
Submitted 28 April, 2014;
originally announced April 2014.
-
Impedance of rigid bodies in one-dimensional elastic collisions
Authors:
Janilo Santos,
Bruna P. W. de Oliveira,
Osman Rosso Nelson
Abstract:
In this work we study the problem of one-dimensional elastic collisions of billiard balls, considered as rigid bodies, in a framework very different from the classical one presented in text books. Implementing the notion of impedance matching as a way to understand eficiency of energy transmission in elastic collisions, we find a solution which frames the problem in terms of this conception. We sh…
▽ More
In this work we study the problem of one-dimensional elastic collisions of billiard balls, considered as rigid bodies, in a framework very different from the classical one presented in text books. Implementing the notion of impedance matching as a way to understand eficiency of energy transmission in elastic collisions, we find a solution which frames the problem in terms of this conception. We show that the mass of the ball can be seen as a measure of its impedance and verify that the problem of maximum energy transfer in elastic collisions can be thought of as a problem of impedance matching between different media. This approach extends the concept of impedance, usually associated with oscillatory systems, to system of rigid bodies.
△ Less
Submitted 6 December, 2012;
originally announced December 2012.
-
Impact of site dilution and agent diffusion on the critical behavior of the majority-vote model
Authors:
Nuno Crokidakis,
Paulo Murilo Castro de Oliveira
Abstract:
In this work we study a modified version of the majority-vote model with noise. In particular, we consider a random diluted square lattice for which a site is empty with a probability $r$. In order to analyze the critical behavior of the model, we perform Monte Carlo simulations on lattices with linear sizes up to L=140. By means of a finite-size scaling analysis we estimate the critical noises…
▽ More
In this work we study a modified version of the majority-vote model with noise. In particular, we consider a random diluted square lattice for which a site is empty with a probability $r$. In order to analyze the critical behavior of the model, we perform Monte Carlo simulations on lattices with linear sizes up to L=140. By means of a finite-size scaling analysis we estimate the critical noises $q_{c}$ and the critical ratios $β/ν$, $γ/ν$ and $1/ν$ for some values of the probability $r$.
△ Less
Submitted 5 July, 2012; v1 submitted 17 April, 2012;
originally announced April 2012.
-
Universality in Bibliometrics
Authors:
Roberto da Silva,
Fahad Kalil,
Alexandre Souto Martinez,
Jose Palazzo Moreira de Oliveira
Abstract:
Many discussions have enlarged the literature in Bibliometrics since the Hirsh proposal, the so called $h$-index. Ranking papers according to their citations, this index quantifies a researcher only by its greatest possible number of papers that are cited at least $h$ times. A closed formula for $h$-index distribution that can be applied for distinct databases is not yet known. In fact, to obtain…
▽ More
Many discussions have enlarged the literature in Bibliometrics since the Hirsh proposal, the so called $h$-index. Ranking papers according to their citations, this index quantifies a researcher only by its greatest possible number of papers that are cited at least $h$ times. A closed formula for $h$-index distribution that can be applied for distinct databases is not yet known. In fact, to obtain such distribution, the knowledge of citation distribution of the authors and its specificities are required. Instead of dealing with researchers randomly chosen, here we address different groups based on distinct databases. The first group is composed by physicists and biologists, with data extracted from Institute of Scientific Information (ISI). The second group composed by computer scientists, which data were extracted from Google-Scholar system. In this paper, we obtain a general formula for the $h$-index probability density function (pdf) for groups of authors by using generalized exponentials in the context of escort probability. Our analysis includes the use of several statistical methods to estimate the necessary parameters. Also an exhaustive comparison among the possible candidate distributions are used to describe the way the citations are distributed among authors. The $h$-index pdf should be used to classify groups of researchers from a quantitative point of view, which is meaningfully interesting to eliminate obscure qualitative methods.
△ Less
Submitted 11 November, 2011;
originally announced November 2011.
-
The Sznajd model with limited persuasion: competition between high-reputation and hesitant agents
Authors:
Nuno Crokidakis,
Paulo Murilo Castro de Oliveira
Abstract:
In this work we study a modified version of the two-dimensional Sznajd sociophysics model. In particular, we consider the effects of agents' reputations in the persuasion rules. In other words, a high-reputation group with a common opinion may convince their neighbors with probability $p$, which induces an increase of the group's reputation. On the other hand, there is always a probability…
▽ More
In this work we study a modified version of the two-dimensional Sznajd sociophysics model. In particular, we consider the effects of agents' reputations in the persuasion rules. In other words, a high-reputation group with a common opinion may convince their neighbors with probability $p$, which induces an increase of the group's reputation. On the other hand, there is always a probability $q=1-p$ of the neighbors to keep their opinions, which induces a decrease of the group's reputation. These rules describe a competition between groups with high reputation and hesitant agents, which makes the full-consensus states (with all spins pointing in one direction) more difficult to be reached. As consequences, the usual phase transition does not occur for $p<p_{c} \sim 0.69$ and the system presents realistic democracy-like situations, where the majority of spins are aligned in a certain direction, for a wide range of parameters.
△ Less
Submitted 2 November, 2011; v1 submitted 30 August, 2011;
originally announced August 2011.
-
Can a falling ball lose speed?
Authors:
Paulo Murilo Castro de Oliveira,
Suzana Moss de Oliveira,
Felipe Augusto Pereira,
José Carlos Sartorelli
Abstract:
A small and light polystyrene ball is released without initial speed from a certain height above the floor. Then, it falls on air. The main responsible for the friction force against the movement is the wake of successive air vortices which form behind (above) the falling ball, a turbulent phenomenon. After the wake appears, the friction force compensates the Earth gravitational attraction and the…
▽ More
A small and light polystyrene ball is released without initial speed from a certain height above the floor. Then, it falls on air. The main responsible for the friction force against the movement is the wake of successive air vortices which form behind (above) the falling ball, a turbulent phenomenon. After the wake appears, the friction force compensates the Earth gravitational attraction and the ball speed stabilises in a certain limiting value Vl. Before the formation of the turbulent wake, however, the friction force is not strong enough, allowing the initially growing speed to surpass the future final value Vl. Only after the wake finally becomes long enough, the ball speed decreases and reaches the proper Vl.
△ Less
Submitted 21 May, 2010;
originally announced May 2010.
-
Statistics for Ranking Program Committees and Editorial Boards
Authors:
Roberto da Silva,
Jose Palazzo de Oliveira,
Jose Valdeni de Lima,
Viviane Moreira
Abstract:
Ranking groups of researchers is important in several contexts and can serve many purposes such as the fair distribution of grants based on the scientist's publication output, concession of research projects, classification of journal editorial boards and many other applications in a social context. In this paper, we propose a method for measuring the performance of groups of researchers. The pr…
▽ More
Ranking groups of researchers is important in several contexts and can serve many purposes such as the fair distribution of grants based on the scientist's publication output, concession of research projects, classification of journal editorial boards and many other applications in a social context. In this paper, we propose a method for measuring the performance of groups of researchers. The proposed method is called alpha-index and it is based on two parameters: (i) the homogeneity of the h-indexes of the researchers in the group; and (ii) the h-group, which is an extension of the h-index for groups. Our method integrates the concepts of homogeneity and absolute value of the h-index into a single measure which is appropriate for the evaluation of groups. We report on experiments that assess computer science conferences based on the h-indexes of their program committee members. Our results are similar to a manual classification scheme adopted by a research agency.
△ Less
Submitted 4 February, 2010;
originally announced February 2010.
-
A simple branching model that reproduces language family and language population distributions
Authors:
V. Schwämmle,
P. M. C. de Oliveira
Abstract:
Human history leaves fingerprints in human languages. Little is known over language evolution and its study is of great importance. Here, we construct a simple stochastic model and compare its results to statistical data of real languages. The model bases on the recent findings that language changes occur independently on the population size. We find agreement with the data additionally assuming…
▽ More
Human history leaves fingerprints in human languages. Little is known over language evolution and its study is of great importance. Here, we construct a simple stochastic model and compare its results to statistical data of real languages. The model bases on the recent findings that language changes occur independently on the population size. We find agreement with the data additionally assuming that languages may be distinguished by having at least one among a finite, small number of different features. This finite set is used also in order to define the distance between two languages, similarly to linguistics tradition since Swadesh.
△ Less
Submitted 14 November, 2008;
originally announced November 2008.
-
The infinite partition of a line segment and multifractal objects
Authors:
A. I. L. de Araújo,
R. F. Soares,
J. P. de Oliveira,
G. Corso
Abstract:
We report an algorithm for the partition of a line segment according to a given ratio $ν$. At each step the length distribution among sets of the partition follows a binomial distribution. We call $k$-set to the set of elements with the same length at the step $n$. The total number of elements is $2^n$ and the number of elements in a same $k$-set is $C_n^k$. In the limit of an infinite partion t…
▽ More
We report an algorithm for the partition of a line segment according to a given ratio $ν$. At each step the length distribution among sets of the partition follows a binomial distribution. We call $k$-set to the set of elements with the same length at the step $n$. The total number of elements is $2^n$ and the number of elements in a same $k$-set is $C_n^k$. In the limit of an infinite partion this object become a multifractal where each $k$-set originate a fractal. We find the fractal spectrum $D_k$ and calculate where is its maximum. Finally we find the values of $D_k$ for the limits $k/n \to 0$ and 1.
△ Less
Submitted 7 November, 2008;
originally announced November 2008.
-
Monte Carlo Simulations for the Slow Relaxations of Crumpled Surfaces
Authors:
Klauko P. Mota,
Paulo Murilo C. de Oliveira
Abstract:
In this paper we study crumpled surfaces through Monte Carlo Simulations. The crumpled surface is represented by a cluster of spins pointing up and spins pointing down represent the air both inside and around the surface. We follow the time dynamics of this fractal structure and we have shown that it presents a stretched exponential behaviour.
In this paper we study crumpled surfaces through Monte Carlo Simulations. The crumpled surface is represented by a cluster of spins pointing up and spins pointing down represent the air both inside and around the surface. We follow the time dynamics of this fractal structure and we have shown that it presents a stretched exponential behaviour.
△ Less
Submitted 21 October, 2008;
originally announced October 2008.
-
Does Sex Induce a Phase Transition?
Authors:
P. M. C. de Oliveira,
S. Moss de Oliveira,
D. Stauffer,
S. Cebrat,
A. Pekalski
Abstract:
We discovered a dynamic phase transition induced by sexual reproduction. The dynamics is a pure Darwinian rule with both fundamental ingredients to drive evolution: 1) random mutations and crossings which act in the sense of increasing the entropy (or diversity); and 2) selection which acts in the opposite sense by limiting the entropy explosion. Selection wins this competition if mutations perf…
▽ More
We discovered a dynamic phase transition induced by sexual reproduction. The dynamics is a pure Darwinian rule with both fundamental ingredients to drive evolution: 1) random mutations and crossings which act in the sense of increasing the entropy (or diversity); and 2) selection which acts in the opposite sense by limiting the entropy explosion. Selection wins this competition if mutations performed at birth are few enough. By slowly increasing the average number m of mutations, however, the population suddenly undergoes a mutational degradation precisely at a transition point mc. Above this point, the "bad" alleles spread over the genetic pool of the population, overcoming the selection pressure. Individuals become selectively alike, and evolution stops. Only below this point, m < mc, evolutionary life is possible.
The finite-size-scaling behaviour of this transition is exhibited for large enough "chromosome" lengths L. One important and surprising observation is the L-independence of the transition curves, for large L. They are also independent on the population size. Another is that mc is near unity, i.e. life cannot be stable with much more than one mutation per diploid genome, independent of the chromosome length, in agreement with reality. One possible consequence is that an eventual evolutionary jump towards larger L enabling the storage of more genetic information would demand an improved DNA copying machinery in order to keep the same total number of mutations per offspring.
△ Less
Submitted 8 October, 2007;
originally announced October 2007.
-
A computer simulation of language families
Authors:
Paulo Murilo Castro de Oliveira,
Dietrich Stauffer,
Soeren Wichmann,
Suzana Moss de Oliveira
Abstract:
This paper presents Monte Carlo simulations of language populations and the development of language families, showing how a simple model can lead to distributions similar to the ones observed empirically. The model used combines features of two models used in earlier work by phycisists for the simulation of competition among languages: the "Viviane" model for the migration of people and propagat…
▽ More
This paper presents Monte Carlo simulations of language populations and the development of language families, showing how a simple model can lead to distributions similar to the ones observed empirically. The model used combines features of two models used in earlier work by phycisists for the simulation of competition among languages: the "Viviane" model for the migration of people and propagation of languages and the "Schulze" model, which uses bitstrings as a way of characterising structural features of languages.
△ Less
Submitted 25 August, 2008; v1 submitted 6 September, 2007;
originally announced September 2007.
-
Bit-strings and other modifications of Viviane model for language competition
Authors:
P. M. C. de Oliveira,
D. Stauffer,
F. W. S. Lima,
A. O. Sousa,
C. Schulze,
S. Moss de Oliveira
Abstract:
The language competition model of Viviane de Oliveira et al is modified by associating with each language a string of 32 bits. Whenever a language changes in this Viviane model, also one randomly selected bit is flipped. If then only languages with different bit-strings are counted as different, the resulting size distribution of languages agrees with the empirically observed slightly asymmetric…
▽ More
The language competition model of Viviane de Oliveira et al is modified by associating with each language a string of 32 bits. Whenever a language changes in this Viviane model, also one randomly selected bit is flipped. If then only languages with different bit-strings are counted as different, the resulting size distribution of languages agrees with the empirically observed slightly asymmetric log-normal distribution. Several other modifications were also tried but either had more free parameters or agreed less well with reality.
△ Less
Submitted 20 August, 2006;
originally announced August 2006.
-
Optimization of hierarchical structures of information flow
Authors:
D. Stauffer,
P. M. C. de Oliveira
Abstract:
The efficiency of a large hierarchical organisation is simulated on Barabasi-Albert networks, when each needed link leads to a loss of information. The optimum is found at a finite network size, corresponding to about five hierarchical layers, provided a cost for building the network is included in our optimization.
The efficiency of a large hierarchical organisation is simulated on Barabasi-Albert networks, when each needed link leads to a loss of information. The optimum is found at a finite network size, corresponding to about five hierarchical layers, provided a cost for building the network is included in our optimization.
△ Less
Submitted 17 August, 2006;
originally announced August 2006.
-
Multi-vanadium substituted polyoxometalates as efficient electrocatalysts for the oxidation of l-cysteine at low potential on glassy carbon electrodes
Authors:
Bineta Keita,
Roland Contant,
Pierre Mialane,
Francis Sécheresse,
Pedro De Oliveira,
Louis Nadjo
Abstract:
The electrochemical behaviours of the sandwich-type complex [As2W18(VO)3O66]11- were studied in a pH 7 medium and compared with those of the three following Dawson-type vanadium-substituted complexes: [P2V2W16O62]8- (P2V2W16), [P2MoV2W15O62]8- (P2MoV2W15) and [P2V3W15O62]9- (P2V3W15). Electrochemistry shows that the sandwich-type POM contains 2 VIV centers and one VV center and must be formulate…
▽ More
The electrochemical behaviours of the sandwich-type complex [As2W18(VO)3O66]11- were studied in a pH 7 medium and compared with those of the three following Dawson-type vanadium-substituted complexes: [P2V2W16O62]8- (P2V2W16), [P2MoV2W15O62]8- (P2MoV2W15) and [P2V3W15O62]9- (P2V3W15). Electrochemistry shows that the sandwich-type POM contains 2 VIV centers and one VV center and must be formulated As2V2IVVW18, in agreement with titration, elemental analysis and magnetic measurements on this element.. All the POMs of this work proved efficient for the oxidation of L-cysteine. Comparison of the present results with those of mono-Vanadium substituted POMs indicates that accumulation of vanadium atoms in the POM framework is beneficial in the electrocatalytic process. In addition, the present work highlights the important influence of the POM structure in the electrocatalytic oxidation of L-cysteine. The remarkable outcome of this work is that the potential for the oxidation of L-cysteine in the presence of the selected POMs has been substantially driven in the negative direction compared to the case of glassy carbon alone, a feature which is associated with faster kinetics. The stability of the systems must also be pointed out.
△ Less
Submitted 8 August, 2006;
originally announced August 2006.
-
Ising Ferromagnet: Zero-Temperature Dynamic Evolution
Authors:
P. M. C. de Oliveira,
C. M. Newman,
V. Sidoravicious,
D. L. Stein
Abstract:
The dynamic evolution at zero temperature of a uniform Ising ferromagnet on a square lattice is followed by Monte Carlo computer simulations. The system always eventually reaches a final, absorbing state, which sometimes coincides with a ground state (all spins parallel), and sometimes does not (parallel stripes of spins up and down). We initiate here the numerical study of ``Chaotic Time Depend…
▽ More
The dynamic evolution at zero temperature of a uniform Ising ferromagnet on a square lattice is followed by Monte Carlo computer simulations. The system always eventually reaches a final, absorbing state, which sometimes coincides with a ground state (all spins parallel), and sometimes does not (parallel stripes of spins up and down). We initiate here the numerical study of ``Chaotic Time Dependence'' (CTD) by seeing how much information about the final state is predictable from the randomly generated quenched initial state. CTD was originally proposed to explain how nonequilibrium spin glasses could manifest equilibrium pure state structure, but in simpler systems such as homogeneous ferromagnets it is closely related to long-term predictability and our results suggest that CTD might indeed occur in the infinite volume limit.
△ Less
Submitted 9 May, 2006;
originally announced May 2006.
-
Modified Zakharov equations for plasmas with a quantum correction
Authors:
L. G. Garcia,
F. Haas,
L. P. L. de Oliveira,
J. Goedert
Abstract:
Quantum Zakharov equations are obtained to describe the nonlinear interaction between quantum Langmuir waves and quantum ion-acoustic waves. These quantum Zakharov equations are applied to two model cases, namely the four-wave interaction and the decay instability. In the case of the four-wave instability, sufficiently large quantum effects tend to suppress the instability. For the decay instabi…
▽ More
Quantum Zakharov equations are obtained to describe the nonlinear interaction between quantum Langmuir waves and quantum ion-acoustic waves. These quantum Zakharov equations are applied to two model cases, namely the four-wave interaction and the decay instability. In the case of the four-wave instability, sufficiently large quantum effects tend to suppress the instability. For the decay instability, the quantum Zakharov equations lead to results similar to those of the classical decay instability except for quantum correction terms in the dispersion relations. Some considerations regarding the nonlinear aspects of the quantum Zakharov equations are also offered.
△ Less
Submitted 26 October, 2004;
originally announced October 2004.
