Showing 1–19 of 19 results for author: Ohl, C

Amplification of supersonic micro-jets by resonant inertial cavitation-bubble pair

Authors: Yuzhe Fan, Alexander Bußmann, Fabian Reuter, Hengzhu Bao, Stefan Adami, José M. Gordillo, Nikolaus Adams, Claus-Dieter Ohl

Abstract: We reveal for the first time by experiments that within a narrow parameter regime, two cavitation bubbles with identical energy generated in anti-phase develop a supersonic jet. High-resolution numerical simulation shows a mechanism for jet amplification based on toroidal shock wave and bubble necking interaction. The micro-jet reaches velocities in excess of 1000 m/s. We demonstrate that potentia… ▽ More We reveal for the first time by experiments that within a narrow parameter regime, two cavitation bubbles with identical energy generated in anti-phase develop a supersonic jet. High-resolution numerical simulation shows a mechanism for jet amplification based on toroidal shock wave and bubble necking interaction. The micro-jet reaches velocities in excess of 1000 m/s. We demonstrate that potential flow approximation established for Worthington jets accurately predicts the evolution of the bubble gas-liquid interfaces. △ Less

Submitted 4 January, 2024; originally announced January 2024.

Comments: 17 pages, 8 figures

Single cavitation bubble dynamics in a stagnation flow

Authors: Dominik Mnich, Fabian Reuter, Fabian Denner, Claus-Dieter Ohl

Abstract: Jetting of collapsing bubbles is a key aspect in cavitation-driven fluid-solid interactions as it shapes the bubble dynamics and additionally due to its direct interaction with the wall. We study experimentally and numerically the near-wall collapse and jetting of a single bubble seeded into the stagnation flow of a wall jet, i.e. a jet that im**es perpendicular onto a solid wall. High-speed ima… ▽ More Jetting of collapsing bubbles is a key aspect in cavitation-driven fluid-solid interactions as it shapes the bubble dynamics and additionally due to its direct interaction with the wall. We study experimentally and numerically the near-wall collapse and jetting of a single bubble seeded into the stagnation flow of a wall jet, i.e. a jet that im**es perpendicular onto a solid wall. High-speed imaging shows rich and rather distinct bubble dynamics for different wall jet flow velocities and bubble-to-wall stand-off distances. The simulations use a Volume-of-Fluid method and allow to numerically determine the microscopic and transient pressures and shear stresses on the wall. It is shown that a wall jet at moderate flow velocities of a few metres per second already shapes the bubble ellipsoidally inducing a planar and convergent jet flow. The distinct bubble dynamics allow to tailor the wall interaction. In particular, the shear stresses can be increased by orders of magnitude without increasing impact pressures the same way. Interestingly, at small seeding stand-offs, the bubble during the final collapse stage can lift off the wall and migrate against the flow direction of the wall jet such that the violent collapse occurs away from the wall. △ Less

Submitted 6 December, 2023; originally announced December 2023.

High-speed ultrasound imaging of bubbly flows and shear waves in soft matter

Authors: Juan Manuel Rosselló, Saber Izak Ghasemian, Claus-Dieter Ohl

Abstract: In this methods paper, we explore the capabilities of high-speed ultrasound imaging (USI) to study fast varying and complex multi-phase structures in liquids and soft materials. Specifically, we assess the advantages and the limitations of this imaging technique through three distinct experiments involving rapid dynamics: the fl ow induced by a liquid jet, the dissolution of sub-micron bubbles in… ▽ More In this methods paper, we explore the capabilities of high-speed ultrasound imaging (USI) to study fast varying and complex multi-phase structures in liquids and soft materials. Specifically, we assess the advantages and the limitations of this imaging technique through three distinct experiments involving rapid dynamics: the fl ow induced by a liquid jet, the dissolution of sub-micron bubbles in water, and the propagation of shear waves in a soft elastic material. The phenomena were simultaneously characterized using optical microscopy and USI with bubbles as contrast agents. In water, we use compounded high-speed USI for tracking a multi-phase flow produced by a jetting bubble diving into a liquid pool at speeds around 20 m/s. These types of jets are produced by focusing a single laser pulse below the liquid surface. Upon breakup, they create a bubbly fl ow that exhibits high reflectivity to the ultrasound signal, enabling the visualization of the subsequent complex turbulent flow. In a second experiment, we demonstrate the potential of USI for recording the stability and diffusive shrinkage of micro- and nanobubbles in water that could not be optically resolved. Puncturing an elastic material with a liquid jet creates shear waves that can be utilized for elastography measurements. We analysed the shape and speed of shear waves produced by different types of jetting bubbles in industrial gelatin. The wave characteristics were simultaneously determined by implementing particle velocimetry in optical and ultrasound measurements. For the latter, we employed a novel method to create homogeneously distributed micro- and nanobubbles in gelatin by illuminating it with a collimated laser beam. △ Less

Submitted 4 December, 2023; originally announced December 2023.

Finite amplitude wave propagation through bubbly fluids

Authors: Siew-Wan Ohl, Juan Manuel Rossello, Daniel Fuster, Claus-Dieter Ohl

Abstract: The existence of only a few bubbles could drastically reduce the acoustic wave speed in a liquid. Wood's equation models the linear sound speed, while the speed of an ideal shock waves is derived as a function of the pressure ratio across the shock. The common finite amplitude waves lie, however, in between these limits. We show that in a bubbly medium, the high frequency components of finite ampl… ▽ More The existence of only a few bubbles could drastically reduce the acoustic wave speed in a liquid. Wood's equation models the linear sound speed, while the speed of an ideal shock waves is derived as a function of the pressure ratio across the shock. The common finite amplitude waves lie, however, in between these limits. We show that in a bubbly medium, the high frequency components of finite amplitude waves are attenuated and dissipate quickly, but a low frequency part remains. This wave is then transmitted by the collapse of the bubbles and its speed decreases with increasing void fraction. We demonstrate that the linear and the shock wave regimes can be smoothly connected through a Mach number based on the collapse velocity of the bubbles. △ Less

Submitted 21 August, 2023; originally announced August 2023.

Acoustic Resonance Effects and Cavitation in SAW Aerosol Generation

Authors: Mehrzad Roudini, Juan Manuel Rosselló, Ofer Manor, Claus-Dieter Ohl, Andreas Winkler

Abstract: The interaction of surface acoustic waves (SAWs) with liquids enables the production of aerosols with adjustable droplet sizes in the micrometer range expelled from a very compact source. Understanding the nonlinear acousto-hydrodynamics of SAWs with a regulated micro-scale liquid film is essential for acousto-microfluidics platforms, particularly aerosol generators. In this study, we demonstrate… ▽ More The interaction of surface acoustic waves (SAWs) with liquids enables the production of aerosols with adjustable droplet sizes in the micrometer range expelled from a very compact source. Understanding the nonlinear acousto-hydrodynamics of SAWs with a regulated micro-scale liquid film is essential for acousto-microfluidics platforms, particularly aerosol generators. In this study, we demonstrate the presence of micro-cavitation in an MHz-frequency SAW aerosol generation platform, which is touted as a leap in aerosol technology with versatile application fields including biomolecule inhalation therapy, micro-chromatography and spectroscopy, olfactory displays, and material deposition. Using analysis methods with high temporal and spatial resolution, we demonstrate that SAWs stabilize spatially arranged liquid micro-domes atop the generator's surface. Our experiments show that these liquid domes become acoustic resonators with highly fluctuating pressure amplitudes that can even nucleate cavitation bubbles, as supported by analytical modeling. The observed fragmentation of liquid domes indicates the participation of three droplet generation mechanisms, including cavitation and capillary-wave instabilities. During aerosol generation, the cavitation bubbles contribute to the ejection of droplets from the liquid domes and also explain observed microstructural damage patterns on the chip surface eventually caused by cavitation-based erosion. △ Less

Submitted 3 June, 2023; originally announced June 2023.

Heterogeneous cavitation from atomically smooth liquid-liquid interfaces

Authors: Patricia Pfeiffer, Meysam Shahrooz, Marco Tortora, Carlo Massimo Casciola, Ryan Holman, Rares Salomir, Simone Meloni, Claus-Dieter Ohl

Abstract: Pressure reduction in liquids may result in vaporization and bubble formation. This thermodynamic process is termed cavitation. It is commonly observed in hydraulic machinery, ship propellers, and even in medical therapy within the human body. While cavitation may be beneficial for the removal of malign tissue, yet in many cases it is unwanted due to its ability to erode nearly any material in clo… ▽ More Pressure reduction in liquids may result in vaporization and bubble formation. This thermodynamic process is termed cavitation. It is commonly observed in hydraulic machinery, ship propellers, and even in medical therapy within the human body. While cavitation may be beneficial for the removal of malign tissue, yet in many cases it is unwanted due to its ability to erode nearly any material in close contact. Current understanding is that the origin of heterogeneous cavitation are nucleation sites where stable gas cavities reside, e.g., on contaminant particles, submerged surfaces or shell stabilized microscopic bubbles. Here, we present the finding of a so far unreported nucleation site, namely the atomically smooth interface between two immiscible liquids. The non-polar liquid of the two has a higher gas solubility and acts upon pressure reduction as a gas reservoir that accumulates at the interface. We describe experiments that clearly reveal the formation of cavitation on non-polar droplets in contact with water and elucidate the working mechanism that leads to the nucleation of gas pockets through simulations. △ Less

Submitted 2 June, 2023; originally announced June 2023.

Comments: This preprint has not undergone peer review or any post-submission improvements or corrections. The Version of Record of this article is published in Nature Physics, and is available online at https://doi.org/10.1038/s41567-022-01764-z

Journal ref: Nature Physics 18, pages 1431-1435 (2022)

High-Speed Ultrasound Imaging of Laser-Induced Cavitation Bubbles

Authors: S. Izak Ghasemian, F. Reuter, C. D. Ohl

Abstract: While the ultrasound and cavitation based therapies have mushroomed over the years, there is a lack of online monitoring the cavitation bubble dynamics in biological tissue. {\color{black}Here we demonstrate that with ultrasonic plane wave imaging the fast dynamics of single cavitation bubbles can be resolved non-invasively in a tissue mimicking material}. Due to the high contrast of the bubbles,… ▽ More While the ultrasound and cavitation based therapies have mushroomed over the years, there is a lack of online monitoring the cavitation bubble dynamics in biological tissue. {\color{black}Here we demonstrate that with ultrasonic plane wave imaging the fast dynamics of single cavitation bubbles can be resolved non-invasively in a tissue mimicking material}. Due to the high contrast of the bubbles, plane wave compounding is not necessary and frame rates of up to 74 kHz can been achieved with a research grade ultrasound scanner. Comparison with simultaneous high-speed imaging demonstrates excellent agreement of both measurement modalities in water and in a tissue mimicking material. △ Less

Submitted 25 May, 2023; originally announced May 2023.

Journal ref: Volume 119, Issue 11 (2021)

Bubble nucleation and jetting inside a millimetric droplet

Authors: Juan Manuel Rosselló, Hendrik Reese, K. Ashoke Raman, Claus-Dieter Ohl

Abstract: In this work, we present experiments and simulations on the nucleation and successive dynamics of laser-induced bubbles inside liquid droplets in free-fall motion, i.e. a case with a free boundary in all directions. The droplets of a millimetric size have a nearly spherical shape by the moment the bubble is nucleated. We have investigated the nucleation of secondary bubbles induced by the rarefact… ▽ More In this work, we present experiments and simulations on the nucleation and successive dynamics of laser-induced bubbles inside liquid droplets in free-fall motion, i.e. a case with a free boundary in all directions. The droplets of a millimetric size have a nearly spherical shape by the moment the bubble is nucleated. We have investigated the nucleation of secondary bubbles induced by the rarefaction wave that is produced when the shock wave emitted by the laser-induced plasma reflects at the drop surface. Interestingly, three-dimensional clusters of cavitation bubbles are observed. Their shape is compared with the negative pressure distribution computed with a CFD model and allows us to estimate a cavitation threshold value. High-speed recordings of the drop/bubble dynamics are complemented by the velocity and pressure fields simulated for the same initial conditions. The effect of the proximity of a curved free surface on the jetting dynamics of the bubbles was qualitatively assessed by classifying the cavitation events using a non-dimensional stand-off parameter which depends on the drop size, the bubble maximum radius and the relative position of the bubble inside the drop. Additionally, we studied the role of the drop's curvature by implementing a structural similarity algorithm to compare cases with bubbles produced near a flat surface to the bubbles inside the drop. This quantitative comparison method indicated the existence of equivalent stand-off distances at which bubbles influenced by different boundaries behave in a very similar way. The oscillation of the laser-induced bubbles promote the onset of Rayleigh-Taylor and Rayleigh-Plateau instabilities, observed on the drop's surface. This phenomenon was studied by varying the ratio of the maximum radii of the bubble and the drop. The specific mechanisms leading to the destabilisation of the droplet surface were identified. △ Less

Submitted 5 June, 2023; v1 submitted 27 March, 2023; originally announced March 2023.

Bullseye focusing of cylindrical waves at a liquid-solid interface

Authors: Ulisses J. Gutiérrez-Hernández, Hendrik Reese, Claus-Dieter Ohl, Pedro A. Quinto-Su

Abstract: Two converging and superimposing shock and Rayleigh waves are generated on a glass substrate by focusing laser pulses on two concentric rings in a bullseye configuration (67\mm~and 96\mm~radii). We study experimentally the threshold for substrate damage as a function of the number of repetitions and the delay (0-20\,ns). The bullseye focusing experiments are compared to a single focusing ring. Add… ▽ More Two converging and superimposing shock and Rayleigh waves are generated on a glass substrate by focusing laser pulses on two concentric rings in a bullseye configuration (67\mm~and 96\mm~radii). We study experimentally the threshold for substrate damage as a function of the number of repetitions and the delay (0-20\,ns). The bullseye focusing experiments are compared to a single focusing ring. Additionally, fluid-structure interaction simulations using a Volume-of-Fluid framework are utilized to estimate the stresses. The lowest number of repetitions to attain surface damage is found for constructive superposition of the Rayleigh waves, i.e., here for a delay of $10\,$ns. The observed damage is consistent with the simulations where the largest positive stresses ($\sim 5.6\,$GPa) are achieved for bullseye focusing with \dt = 10\,ns, followed by \dt= 20\,ns which corresponds to simultaneous shock wave focusing. In all these cases, the positive stresses are followed (a few nanoseconds later) by negative stresses that can reach $\sim-6.4\,$GPa. △ Less

Submitted 23 September, 2022; originally announced September 2022.

Jet effusion from a metal droplet irradiated by a polarized ultrashort laser pulse

Authors: S. Yu. Grigoryev, B. V. Lakatosh, P. M. Solyankin, M. S. Krivokorytov, V. V. Zhakhovsky, S. A. Dyachkov, C. -D. Ohl, A. P. Shkurinov, V. V. Medvedev

Abstract: Fragmentation of liquid metal droplets irradiated by linearly and circularly polarized femtosecond laser pulses is observed in our experiment. The obtained shadowgraph snapshots demonstrate that a circularly polarized pulse may produce several randomly-oriented jets effused from the expanding droplets, while a linearly polarized laser pulse generates strictly the cruciform jets. The latter orienta… ▽ More Fragmentation of liquid metal droplets irradiated by linearly and circularly polarized femtosecond laser pulses is observed in our experiment. The obtained shadowgraph snapshots demonstrate that a circularly polarized pulse may produce several randomly-oriented jets effused from the expanding droplets, while a linearly polarized laser pulse generates strictly the cruciform jets. The latter orientation is tied with polarization plane, rotation of which causes rotation of the cruciform jets by the same angle. To shed light on the experimental data we performed molecular dynamics simulation of droplet expansion induced by angle-dependent heating. Our simulation shows that the jet directions are determined by an oriented angle-dependent energy distribution within a frontal hemisphere layer of droplet after absorption of linearly polarized light. As a result, the produced flow velocity field guided by surface tension forms two high-speed opposite jets oriented across the electric field vector as in our experiment. A shock-wave pulse generated in the frontal layer has angle-dependent amplitude inherited from the oriented energy deposition. The release part of shock pulse produces a cavitation zone nearby the droplet center, and thus an expanding spherical shell is formed from the droplet. The flow velocities within a rearside hemisphere of the shell, produced after reflection of the shock wave from the rear side of droplet, generate two low-speed opposite jets oriented along the electric field vector. Thus we found that the cruciform jets are originated independently from the frontal and rear sides of droplet, and a pair of frontal jets is faster than a pair of rearside jets. △ Less

Submitted 11 April, 2022; originally announced April 2022.

Comments: 11 pages, 10 figures

ACM Class: J.2

Journal ref: Phys. Rev. Applied, v.18, 024072 (2022)

Merging of Soap Bubbles and Why Surfactant Matters

Authors: Patricia Pfeiffer, Qingyun Zeng, Beng Hau Tan, Claus-Dieter Ohl

Abstract: The merging of two soap bubbles is a fundamental fluid mechanical process in foam formation. In the present experimental study the liquid films from two soap bubbles are brought together. Once the liquid layers initially separated by a gas sheet are bridged on a single spot the rapid merging of the two liquid films proceed. Thereby the connecting rim is rapidly accelerated into the separating gas… ▽ More The merging of two soap bubbles is a fundamental fluid mechanical process in foam formation. In the present experimental study the liquid films from two soap bubbles are brought together. Once the liquid layers initially separated by a gas sheet are bridged on a single spot the rapid merging of the two liquid films proceed. Thereby the connecting rim is rapidly accelerated into the separating gas layer. We show that due to the dimple formation the velocity is not uniform and the high acceleration causes initially a Rayleigh-Taylor instability of the liquid rim. At later times, the rim takes heals into a circular shape. However for sufficient high concentrations of the surfactant the unstable rim pinches off microbubbles resulting in a fractal dendritic structure after coalescence. △ Less

Submitted 22 January, 2020; v1 submitted 8 November, 2019; originally announced November 2019.

Shear-wave generation from cavitation in soft solids

Authors: Julien Rapet, Yoshiyuki Tagawa, Claus-Dieter Ohl

Abstract: The formation and dynamics of cavities in liquids leads to focusing of kinetic energy and emission of longitudinal stress waves during the cavity collapse. Here we report that cavitation in elastic solids may additionally emit shear waves that could affect soft tissues in human bodies/brains. During collapse of the cavity close to an air-solid boundary, the cavity moves away from the boundary and… ▽ More The formation and dynamics of cavities in liquids leads to focusing of kinetic energy and emission of longitudinal stress waves during the cavity collapse. Here we report that cavitation in elastic solids may additionally emit shear waves that could affect soft tissues in human bodies/brains. During collapse of the cavity close to an air-solid boundary, the cavity moves away from the boundary and forms a directed jet flow, which confines shear stresses in a volume between the bubble and the free boundary. Elastographic and high-speed imaging resolve this process and reveal the origin of a shear wave in this region. Additionally, the gelatin surface deforms and a conical crack evolves. We speculate that tissue fracture observed in medical therapy may be linked to the non-spherical cavitation bubble collapse. △ Less

Submitted 29 November, 2018; originally announced February 2019.

Oscillate Boiling from Electrical Microheaters

Authors: Dang Minh Nguyen, Liangxing Hu, Jianmin Miao, Claus-Dieter Ohl

Abstract: Oscillate boiling offers excellent heat transfer at temperatures above the Leidenfrost temperature. Here we realize an electrical microheater with an integrated thermal probe and resolve the thermal cycle during the high-frequency bubble oscillations. Thermal rates of $10^8\,$K/s were found indicating its applicability for compact and rapid heat transfer from micro electrical devices. Oscillate boiling offers excellent heat transfer at temperatures above the Leidenfrost temperature. Here we realize an electrical microheater with an integrated thermal probe and resolve the thermal cycle during the high-frequency bubble oscillations. Thermal rates of $10^8\,$K/s were found indicating its applicability for compact and rapid heat transfer from micro electrical devices. △ Less

Submitted 3 July, 2018; originally announced July 2018.

Journal ref: Phys. Rev. Applied 10, 044064 (2018)

Flow field from transient bubble oscillation in a narrow gap: numerical simulations and effect on biological cells

Authors: Milad Mohammadzadeh, Fenfang Li, Claus-Dieter Ohl

Abstract: The flow driven by a rapidly expanding and collapsing cavitation bubble in a narrow cylindrical gap is studied with the volume of fluid method. The simulations reveal a develo** plug flow during the early expansion followed by flow reversal at later stages. An adverse pressure gradient leads to boundary layer separation and flow reversal, causing large shear stress near the boundaries. Analytica… ▽ More The flow driven by a rapidly expanding and collapsing cavitation bubble in a narrow cylindrical gap is studied with the volume of fluid method. The simulations reveal a develo** plug flow during the early expansion followed by flow reversal at later stages. An adverse pressure gradient leads to boundary layer separation and flow reversal, causing large shear stress near the boundaries. Analytical solution to a planar pulsating flow shows qualitative agreement with the CFD results. The shear stress close to boundaries has implications to deformable objects located near the bubble: experiments reveal that thin, flat biological cells entrained in the boundary layer become stretched, while cells with a larger cross-section are mainly transported with the flow. △ Less

Submitted 13 May, 2016; originally announced May 2016.

Comments: 10 pages, 8 figures, keywords: cavitation, microfluidics, boundary layer separation

Journal ref: Phys. Rev. Fluids 2, 014301 (2017)

Oscillate Boiling

Authors: Fenfang Li, Roberto Gonzalez-Avila, Dang Minh Nguyen, Claus-Dieter Ohl

Abstract: We report about an intriguing boiling regime occurring for small heaters embedded on the boundary in subcooled water. The microheater is realized by focusing a continuous wave laser beam to about $10\,μ$m in diameter onto a 165\,nm-thick layer of gold, which is submerged in water. After an initial vaporous explosion a single bubble oscillates continuously and repeatably at several $100\,$kHz. The… ▽ More We report about an intriguing boiling regime occurring for small heaters embedded on the boundary in subcooled water. The microheater is realized by focusing a continuous wave laser beam to about $10\,μ$m in diameter onto a 165\,nm-thick layer of gold, which is submerged in water. After an initial vaporous explosion a single bubble oscillates continuously and repeatably at several $100\,$kHz. The microbubble's oscillations are accompanied with bubble pinch-off leading to a stream of gaseous bubbles into the subcooled water. The self-driven bubble oscillation is explained with a thermally kicked oscillator caused by the non-spherical collapses and by surface pinning. Additionally, Marangoni stresses induce a recirculating streaming flow which transports cold liquid towards the microheater reducing diffusion of heat along the substrate and therefore stabilizing the phenomenon to many million cycles. We speculate that this oscillate boiling regime may allow to overcome the heat transfer thresholds observed during the nucleate boiling crisis and offers a new pathway for heat transfer under microgravity conditions. △ Less

Submitted 10 April, 2016; originally announced April 2016.

Journal ref: Phys. Rev. Fluids 2, 014007 (2017)

Photoacoustics meets ultrasound: micro-Doppler photoacoustic effect and detection by ultrasound

Authors: Fei Gao, Xiaohua Feng, Yuan** Zheng, Claus-Dieter Ohl

Abstract: In recent years, photoacoustics has attracted intensive research for both anatomical and functional biomedical imaging. However, the physical interaction between photoacoustic generated endogenous waves and an exogenous ultrasound wave is a largely unexplored area. Here, we report the initial results about the interaction of photoacoustic and external ultrasound waves leading to a micro-Doppler ph… ▽ More In recent years, photoacoustics has attracted intensive research for both anatomical and functional biomedical imaging. However, the physical interaction between photoacoustic generated endogenous waves and an exogenous ultrasound wave is a largely unexplored area. Here, we report the initial results about the interaction of photoacoustic and external ultrasound waves leading to a micro-Doppler photoacoustic (mDPA) effect, which is experimentally observed and consistently modelled. It is based on a simultaneous excitation on the target with a pulsed laser and continuous wave (CW) ultrasound. The thermoelastically induced expansion will modulate the CW ultrasound and leads to transient Doppler frequency shift. The reported mDPA effect can be described as frequency modulation of the intense CW ultrasound carrier through photoacoustic vibrations. This technique may open the possibility to sensitively detect the photoacoustic vibration in deep optically and acoustically scattering medium, avoiding acoustic distortion that exists in state-of-the-art pulsed photoacoustic imaging systems. △ Less

Submitted 23 December, 2014; originally announced December 2014.

Surface Nanobubble Nucleation Visualized with TIRF Microscopy

Authors: Chon U Chan, Claus-Dieter Ohl

Abstract: Nanobubbles are observed with optical microscopy using the total internal reflection fluorescence (TIRF) excitation. We report on TIRF visualization using Rhodamine 6G at 5$μ\,$M concentration which results to strongly contrasted pictures. The preferential absorption and the high spatial resolution allow to detect nanobubbles with diameters of 230\,nm and above. We present a study of the nucleatio… ▽ More Nanobubbles are observed with optical microscopy using the total internal reflection fluorescence (TIRF) excitation. We report on TIRF visualization using Rhodamine 6G at 5$μ\,$M concentration which results to strongly contrasted pictures. The preferential absorption and the high spatial resolution allow to detect nanobubbles with diameters of 230\,nm and above. We present a study of the nucleation dynamics from the water-ethanol-water exchange and report the size distributions. Nanobubble nucleation is observed within 4 min after the exchange, later a stable population of nanobubbles with a surface density of 0.55 bubbles\,/$μ$m$^2$ is formed. Interestingly, unstable, slowly dissolving nanobubbles are observed during the first stage of water-ethanol exchange; only after the ethanol-water exchange stable nanobubbles appear. △ Less

Submitted 12 April, 2012; originally announced April 2012.

Birth and growth of cavitation bubbles within water under tension confined in a simple synthetic tree

Authors: Olivier Vincent, Philippe Marmottant, Pedro A. Quinto-Su, Claus-Dieter Ohl

Abstract: Water under tension, as can be found in several systems including tree vessels, is metastable. Cavitation can spontaneously occur, nucleating a bubble. We investigate the dynamics of spon- taneous or triggered cavitation inside water filled microcavities of a hydrogel. Results show that a stable bubble is created in only a microsecond timescale, after transient oscillations. Then, a diffusion driv… ▽ More Water under tension, as can be found in several systems including tree vessels, is metastable. Cavitation can spontaneously occur, nucleating a bubble. We investigate the dynamics of spon- taneous or triggered cavitation inside water filled microcavities of a hydrogel. Results show that a stable bubble is created in only a microsecond timescale, after transient oscillations. Then, a diffusion driven expansion leads to filling of the cavity. Analysis reveals that the nucleation of a bubble releases a tension of several tens of MPa, and a simple model captures the different time scales of the expansion process. △ Less

Submitted 13 November, 2012; v1 submitted 20 May, 2011; originally announced May 2011.

Journal ref: Physical Review Letters, 2012, 108, 184502

Stretching Folding Instability and Nanoemulsions

Authors: Chon U. Chan, Claus-Dieter Ohl

Abstract: Here we show a folding-stretching instability in a microfluidic flow focusing device using silicon oil (100cSt) and water. The fluid dynamics video demonstrates an oscillating thread of oil focused by two co-flowing streams of water. We show several high-speed sequences of these oscillations with 30,000 frames/s. Once the thread is decelerated in a slower moving pool downstream an instability se… ▽ More Here we show a folding-stretching instability in a microfluidic flow focusing device using silicon oil (100cSt) and water. The fluid dynamics video demonstrates an oscillating thread of oil focused by two co-flowing streams of water. We show several high-speed sequences of these oscillations with 30,000 frames/s. Once the thread is decelerated in a slower moving pool downstream an instability sets in and water-in-oil droplets are formed. We reveal the details of the pinch-off with 500,000 frames/s. The pinch-off is so repeatable that complex droplet patterns emerge. Some of droplets are below the resolution limit, thus smaller than 1 micrometer in diameter. △ Less

Submitted 16 October, 2009; originally announced October 2009.