-
Solar Wind Driven from GONG Magnetograms in the Last Solar Cycle
Authors:
Zhenguang Huang,
Gabor Toth,
Nishtha Sachdeva,
Bart van der Holst
Abstract:
In a previous study, Huang et al. (2023) used the Alfven Wave Solar atmosphere Model (AWSoM), one of the widely used solar wind models in the community, driven by ADAPT-GONG magnetograms to simulate the solar wind in the last solar cycle and found that the optimal Poynting flux parameter can be estimated from either the open field area or the average unsigned radial component of the magnetic field…
▽ More
In a previous study, Huang et al. (2023) used the Alfven Wave Solar atmosphere Model (AWSoM), one of the widely used solar wind models in the community, driven by ADAPT-GONG magnetograms to simulate the solar wind in the last solar cycle and found that the optimal Poynting flux parameter can be estimated from either the open field area or the average unsigned radial component of the magnetic field in the open field regions. It was also found that the average energy deposition rate (Poynting flux) in the open field regions is approximately constant. In the current study, we expand the previous work by using GONG magnetograms to simulate the solar wind for the same Carrington rotations and determine if the results are similar to the ones obtained with ADAPT-GONG magnetograms. Our results indicate that similar correlations can be obtained from the GONG maps. Moreover, we report that ADAPT-GONG magnetograms can consistently provide better comparisons with 1 AU solar wind observations than GONG magnetograms, based on the best simulations selected by the minimum of the average curve distance for the solar wind speed and density.
△ Less
Submitted 3 March, 2024;
originally announced March 2024.
-
When linear inversion fails: neural-network optimization for sparse-ray travel-time tomography of a volcanic edifice
Authors:
Abolfazl Komeazi,
Georg Rümpker,
Johannes Faber,
Fabian Limberger,
Nishtha Srivastava
Abstract:
In this study, we present an artificial neural network (ANN)-based approach for travel-time tomography of a volcanic edifice. We employ ray tracing to simulate the propagation of seismic waves through the heterogeneous medium of a volcanic edifice, and an inverse modeling algorithm that uses an ANN to estimate the velocity structure from the observed travel-time data. The performance of the approa…
▽ More
In this study, we present an artificial neural network (ANN)-based approach for travel-time tomography of a volcanic edifice. We employ ray tracing to simulate the propagation of seismic waves through the heterogeneous medium of a volcanic edifice, and an inverse modeling algorithm that uses an ANN to estimate the velocity structure from the observed travel-time data. The performance of the approach is evaluated through a 2-dimensional numerical study that simulates i) an active source seismic experiment with few (explosive) sources placed on one side of the edifice and a dense line of receivers placed on the other side, and ii) earthquakes located inside the edifice and receivers placed on both sides of the edifice. The results are compared with those obtained from conventional damped linear inversion, demonstrating that the ANN-based approach outperforms the classical approach, particularly in situations with sparse ray coverage. Our study emphasizes the advantages of employing a relatively simple ANN architecture in conjunction with second-order optimizers to minimize the loss function. The ANN-based approach is computationally efficient and capable of providing high-resolution velocity images of anomalous structures within the edifice, making it a potentially valuable tool for the detection of low velocity anomalies related to magmatic intrusions or mush.
△ Less
Submitted 3 November, 2023;
originally announced November 2023.
-
Solar Wind with Field Lines and Energetic Particles (SOFIE) Model: Application to Historical Solar Energetic Particle Events
Authors:
Lulu Zhao,
Igor Sokolov,
Tamas Gombosi,
David Lario,
Kathryn Whitman,
Zhenguang Huang,
Gabor Toth,
Ward Manchester,
Bart van der Holst,
Nishtha Sachdeva
Abstract:
In this paper, we demonstrate the applicability of the data-driven and self-consistent solar energetic particle model, Solar-wind with FIeld-lines and Energetic-particles (SOFIE), to simulate acceleration and transport processes of solar energetic particles. SOFIE model is built upon the Space Weather Modeling Framework (SWMF) developed at the University of Michigan. In SOFIE, the background solar…
▽ More
In this paper, we demonstrate the applicability of the data-driven and self-consistent solar energetic particle model, Solar-wind with FIeld-lines and Energetic-particles (SOFIE), to simulate acceleration and transport processes of solar energetic particles. SOFIE model is built upon the Space Weather Modeling Framework (SWMF) developed at the University of Michigan. In SOFIE, the background solar wind plasma in the solar corona and interplanetary space is calculated by the Aflvén Wave Solar-atmosphere Model(-Realtime) (AWSoM-R) driven by the near-real-time hourly updated Global Oscillation Network Group (GONG) solar magnetograms. In the background solar wind, coronal mass ejections (CMEs) are launched by placing an imbalanced magnetic flux rope on top of the parent active region, using the Eruptive Event Generator using Gibson-Low model (EEGGL). The acceleration and transport processes are modeled by the Multiple-Field-Line Advection Model for Particle Acceleration (M-FLAMPA). In this work, nine solar energetic particle events (Solar Heliospheric and INterplanetary Environment (SHINE) challenge/campaign events) are modeled. The three modules in SOFIE are validated and evaluated by comparing with observations, including the steady-state background solar wind properties, the white-light image of the CME, and the flux of solar energetic protons, at energies of > 10 MeV.
△ Less
Submitted 28 September, 2023;
originally announced September 2023.
-
Optimum optical designs for diffraction-limited terahertz spectroscopy and imaging systems using off-axis parabolic mirrors
Authors:
Nishtha Chopra,
James Lloyd-Hughes
Abstract:
Off-axis parabolic mirrors (OAPMs) are widely used in the THz and mm-wave communities for spectroscopy and imaging applications, as a result of their broadband, low-loss operation and high numerical apertures. However, the aspherical shape of an OAPM creates significant geometric aberrations that make achieving diffraction-limited performance a challenge, and which lowers the peak electric field s…
▽ More
Off-axis parabolic mirrors (OAPMs) are widely used in the THz and mm-wave communities for spectroscopy and imaging applications, as a result of their broadband, low-loss operation and high numerical apertures. However, the aspherical shape of an OAPM creates significant geometric aberrations that make achieving diffraction-limited performance a challenge, and which lowers the peak electric field strength in the focal plane. Here we quantify the impact of geometric aberrations on the performance of the most widely-used spectrometer designs, by using ray tracing and physical optics calculations to investigate whether diffraction-limited performance can be achieved in both the sample and the detector plane. We identify simple rules, based on marginal ray propagation, that allow spectrometers to be designed that are more robust to misalignment errors, and which have minimal aberrations for THz beams. For a given source this allows the design of optical paths that give the smallest THz beam focal spot, with the highest THz electric field strength possible. This is desirable for improved THz imaging, for better signal-to-noise ratios in linear THz spectroscopy and optical-pump THz-probe spectroscopy, and to achieve higher electric field strengths in non-linear THz spectroscopy
△ Less
Submitted 3 November, 2023; v1 submitted 19 September, 2023;
originally announced September 2023.
-
SAIPy: A Python Package for single station Earthquake Monitoring using Deep Learning
Authors:
Wei Li,
Megha Chakraborty,
Claudia Quinteros Cartaya,
Jonas koehler,
Johannes Faber,
Georg Ruempker,
Nishtha Srivastava
Abstract:
Seismology has witnessed significant advancements in recent years with the application of deep learning methods to address a broad range of problems. These techniques have demonstrated their remarkable ability to effectively extract statistical properties from extensive datasets, surpassing the capabilities of traditional approaches to an extent. In this study, we present SAIPy, an open source Pyt…
▽ More
Seismology has witnessed significant advancements in recent years with the application of deep learning methods to address a broad range of problems. These techniques have demonstrated their remarkable ability to effectively extract statistical properties from extensive datasets, surpassing the capabilities of traditional approaches to an extent. In this study, we present SAIPy, an open source Python package specifically developed for fast data processing by implementing deep learning. SAIPy offers solutions for multiple seismological tasks, including earthquake detection, magnitude estimation, seismic phase picking, and polarity identification. We introduce upgraded versions of previously published models such as CREIMERT capable of identifying earthquakes with an accuracy above 99.8 percent and a root mean squared error of 0.38 unit in magnitude estimation. These upgraded models outperform state of the art approaches like the Vision Transformer network. SAIPy provides an API that simplifies the integration of these advanced models, including CREIMERT, DynaPickerv2, and PolarCAP, along with benchmark datasets. The package has the potential to be used for real time earthquake monitoring to enable timely actions to mitigate the impact of seismic events. Ongoing development efforts aim to enhance the performance of SAIPy and incorporate additional features that enhance exploration efforts, and it also would be interesting to approach the retraining of the whole package as a multi-task learning problem.
△ Less
Submitted 22 August, 2023;
originally announced August 2023.
-
Testing the Potential of Deep Learning in Earthquake Forecasting
Authors:
Jonas Koehler,
Wei Li,
Johannes Faber,
Georg Ruempker,
Nishtha Srivastava
Abstract:
Reliable earthquake forecasting methods have long been sought after, and so the rise of modern data science techniques raises a new question: does deep learning have the potential to learn this pattern? In this study, we leverage the large amount of earthquakes reported via good seismic station coverage in the subduction zone of Japan. We pose earthquake forecasting as a classification problem and…
▽ More
Reliable earthquake forecasting methods have long been sought after, and so the rise of modern data science techniques raises a new question: does deep learning have the potential to learn this pattern? In this study, we leverage the large amount of earthquakes reported via good seismic station coverage in the subduction zone of Japan. We pose earthquake forecasting as a classification problem and train a Deep Learning Network to decide, whether a timeseries of length greater than 2 years will end in an earthquake on the following day with magnitude greater than 5 or not. Our method is based on spatiotemporal b value data, on which we train an autoencoder to learn the normal seismic behaviour. We then take the pixel by pixel reconstruction error as input for a Convolutional Dilated Network classifier, whose model output could serve for earthquake forecasting. We develop a special progressive training method for this model to mimic real life use. The trained network is then evaluated over the actual dataseries of Japan from 2002 to 2020 to simulate a real life application scenario. The overall accuracy of the model is 72.3 percent. The accuracy of this classification is significantly above the baseline and can likely be improved with more data in the future
△ Less
Submitted 4 July, 2023;
originally announced July 2023.
-
Exploring a CNN Model for Earthquake Magnitude Estimation using HR-GNSS data
Authors:
Claudia Quinteros Cartaya,
Jonas Koehler,
Wei Li,
Johannes Faber,
Nishtha Srivastava
Abstract:
High rate Global Navigation Satellite System (HR GNSS) data can be highly useful for earthquake analysis as it provides continuous high-rate measurements of ground motion. This data can be used to estimate the magnitude, to assess the potential of an earthquake for generating tsunamis, and to analyze diverse parameters related to the seismic source. Particularly, in this work, we present the first…
▽ More
High rate Global Navigation Satellite System (HR GNSS) data can be highly useful for earthquake analysis as it provides continuous high-rate measurements of ground motion. This data can be used to estimate the magnitude, to assess the potential of an earthquake for generating tsunamis, and to analyze diverse parameters related to the seismic source. Particularly, in this work, we present the first results of a deep learning model based on a convolutional neural network for earthquake magnitude estimation, using HR GNSS displacement time series. The influence of different dataset configurations, such as station numbers, epicentral distances, signal duration, and earthquake size, were analyzed to figure out how the model can be adapted to various scenarios. We explored the potential of the model for global application and compared its performance using both synthetic and real data from different seismogenic regions. The performance of our model at this stage was satisfactory in estimating earthquake magnitude from synthetic data. Comparable results were observed in tests using synthetic data from a different tectonic region than the training data. Furthermore, the model was tested using real data from different regions and magnitudes, resulting in a good accuracy, provided that the data from a particular group of stations had similar epicentral distance constraints to those used during the model training. The robustness of the DL model can be improved to work independently from the window size of the time series and the number of stations, enabling faster estimation by the model using only near field data. Overall, this study provides insights for the development of future DL approaches for earthquake magnitude estimation with HR-GNSS data, emphasizing the importance of proper handling and careful data selection for further model improvements.
△ Less
Submitted 19 April, 2023;
originally announced April 2023.
-
Real-time Earthquake Monitoring using Deep Learning: a case study on Turkey Earthquake Aftershock Sequence
Authors:
Wei Li,
Jonas Koehler,
Megha Chakraborty,
Claudia Quinteros-Cartaya,
Georg Ruempker,
Nishtha Srivastava
Abstract:
Seismic phase picking and magnitude estimation are essential components of real time earthquake monitoring and earthquake early warning systems. Reliable phase picking enables the timely detection of seismic wave arrivals, facilitating rapid earthquake characterization and early warning alerts. Accurate magnitude estimation provides crucial information about the size of an earthquake and potential…
▽ More
Seismic phase picking and magnitude estimation are essential components of real time earthquake monitoring and earthquake early warning systems. Reliable phase picking enables the timely detection of seismic wave arrivals, facilitating rapid earthquake characterization and early warning alerts. Accurate magnitude estimation provides crucial information about the size of an earthquake and potential impact. Together, these steps contribute to effective earthquake monitoring, enhancing our ability to implement appropriate response measures in seismically active regions and mitigate risks. In this study, we explore the potential of deep learning in real time earthquake monitoring. To that aim, we begin by introducing DynaPicker which leverages dynamic convolutional neural networks to detect seismic body wave phases. Subsequently, DynaPicker is employed for seismic phase picking on continuous seismic recordings. To showcase the efficacy of Dynapicker, several open source seismic datasets including window format data and continuous seismic data are used for seismic phase identification, and arrival time picking. Additionally,the robustness of DynaPicker in classifying seismic phases was tested on the low magnitude seismic data polluted by noise. Finally, the phase arrival time information is integrated into a previously published deep learning model for magnitude estimation. This workflow is then applied and tested on the continuous recording of the aftershock sequences following the Turkey earthquake to detect the earthquakes, seismic phase picking and estimate the magnitude of the corresponding event. The results obtained in this case study exhibit a high level of reliability in detecting the earthquakes and estimating the magnitude of aftershocks following the Turkey earthquake.
△ Less
Submitted 21 June, 2023; v1 submitted 17 November, 2022;
originally announced November 2022.
-
On the specific energy and pressure in near-Earth magnetic clouds
Authors:
Debesh Bhattacharjee,
Prasad Subramanian,
Angelos Vourlidas,
Teresa Nieves-Chinchilla,
Niranjana Thejaswi,
Nishtha Sachdeva
Abstract:
The pressure and energy density of the gas and magnetic field inside solar coronal mass ejections (in relation to that in the ambient solar wind) is thought to play an important role in determining their dynamics as they propagate through the heliosphere. We compare the specific energy (${\rm erg\,g^{-1}}$) [comprising kinetic ($H_{\rm k}$), thermal ($H_{\rm th }$) and magnetic field (…
▽ More
The pressure and energy density of the gas and magnetic field inside solar coronal mass ejections (in relation to that in the ambient solar wind) is thought to play an important role in determining their dynamics as they propagate through the heliosphere. We compare the specific energy (${\rm erg\,g^{-1}}$) [comprising kinetic ($H_{\rm k}$), thermal ($H_{\rm th }$) and magnetic field ($H_{\rm mag}$) contributions] inside MCs and the solar wind background. We examine if the excess thermal + magnetic pressure and specific energy inside MCs (relative to the background) is correlated with their propagation and internal expansion speeds. We ask if the excess thermal + magnetic specific energy inside MCs might make them resemble rigid bodies in the context of aerodynamic drag. We use near-Earth in-situ data from the WIND spacecraft to identify a sample of 152 well observed interplanetary coronal mass ejections and their MC counterparts. We compute various metrics using these data to address our questions. We find that the total specific energy ($H$) inside MCs is approximately equal to that in the background solar wind. We find that the the excess (thermal + magnetic) pressure and specific energy are not well correlated with the near-Earth propagation and expansion speeds. We find that the excess thermal+magnetic specific energy $\gtrsim$ the specific kinetic energy of the solar wind incident on 81--89 \% of the MCs we study. This might explain how MCs retain their structural integrity and resist deformation by the solar wind bulk flow.
△ Less
Submitted 29 October, 2022;
originally announced October 2022.
-
Modeling the Solar Wind During Different Phases of the Last Solar Cycle
Authors:
Zhenguang Huang,
Gabor Toth,
Nishtha Sachdeva,
Lulu Zhao,
Bartholomeus van der Holst,
Igor Sokolov,
Ward Manchester,
Tamas Gombosi
Abstract:
We describe our first attempt to systematically simulate the solar wind during different phases of the last solar cycle with the Alfvén Wave Solar atmosphere Model (AWSoM) developed at the University of Michigan. Key to this study is the determination of the optimal values of one of the most important input parameters of the model, the Poynting flux parameter, which prescribes the energy flux pass…
▽ More
We describe our first attempt to systematically simulate the solar wind during different phases of the last solar cycle with the Alfvén Wave Solar atmosphere Model (AWSoM) developed at the University of Michigan. Key to this study is the determination of the optimal values of one of the most important input parameters of the model, the Poynting flux parameter, which prescribes the energy flux passing through the chromospheric boundary of the model in the form of Alfvén wave turbulence. It is found that the optimal value of the Poynting flux parameter is correlated with the area of the open magnetic field regions with the Spearman's correlation coefficient of 0.96 and anti-correlated with the average unsigned radial component of the magnetic field with the Spearman's correlation coefficient of -0.91. Moreover, the Poynting flux in the open field regions is approximately constant in the last solar cycle, which needs to be validated with observations and can shed light on how Alfvén wave turbulence accelerates the solar wind during different phases of the solar cycle. Our results can also be used to set the Poynting flux parameter for real-time solar wind simulations with AWSoM.
△ Less
Submitted 24 March, 2023; v1 submitted 5 October, 2022;
originally announced October 2022.
-
CREIME: A Convolutional Recurrent model for Earthquake Identification and Magnitude Estimation
Authors:
Megha Chakraborty,
Darius Fenner,
Wei Li,
Johannes Faber,
Kai Zhou,
Georg Ruempker,
Horst Stoecker,
Nishtha Srivastava
Abstract:
The detection and rapid characterisation of earthquake parameters such as magnitude are of prime importance in seismology, particularly in applications such as Earthquake Early Warning (EEW). Traditionally, algorithms such as STA/LTA are used for event detection, while frequency or amplitude domain parameters calculated from 1-3 seconds of first P-arrival data are sometimes used to provide a first…
▽ More
The detection and rapid characterisation of earthquake parameters such as magnitude are of prime importance in seismology, particularly in applications such as Earthquake Early Warning (EEW). Traditionally, algorithms such as STA/LTA are used for event detection, while frequency or amplitude domain parameters calculated from 1-3 seconds of first P-arrival data are sometimes used to provide a first estimate of (body wave) magnitude. Owing to extensive involvement of human experts in parameter determination, these approaches are often found to be insufficient. Moreover, these methods are sensitive to the signal to noise ratio and may often lead to false or missed alarms depending on the choice of parameters. We, therefore, propose a multitasking deep learning model the Convolutional Recurrent model for Earthquake Identification and Magnitude Estimation (CREIME) that: (i) detects the first earthquake signal, from background seismic noise, (ii) determines first P arrival time as well as (iii) estimates the magnitude using the raw 3-component waveform data from a single station as model input. Considering, speed is of essence in EEW, we use up to two seconds of P-wave information which, to the best of our knowledge, is a significantly smaller data window (5 second window with up to of P wave data) compared to the previous studies. To examine the robustness of CREIME we test it on two independent datasets and find that it achieves an average accuracy of 98 percent for event vs noise discrimination and is able to estimate first P arrival time and local magnitude with average root mean squared errors of 0.13 seconds and 0.65 units, respectively. We also compare CREIME architecture with architectures of other baseline models, by training them on the same data, and also with traditional algorithms such as STA/LTA, and show that our architecture outperforms these methods.
△ Less
Submitted 6 April, 2022;
originally announced April 2022.
-
Deep Learning-based Small Magnitude Earthquake Detection and Seismic Phase Classification
Authors:
Wei Li,
Yu Sha,
Kai Zhou,
Johannes Faber,
Georg Ruempker,
Horst Stoecker,
Nishtha Srivastava
Abstract:
Reliable earthquake detection and seismic phase classification is often challenging especially in the circumstances of low magnitude events or poor signal-to-noise ratio. With improved seismometers and better global coverage, a sharp increase in the volume of recorded seismic data is witnessed. This makes the handling of the seismic data rather daunting based on traditional approaches and therefor…
▽ More
Reliable earthquake detection and seismic phase classification is often challenging especially in the circumstances of low magnitude events or poor signal-to-noise ratio. With improved seismometers and better global coverage, a sharp increase in the volume of recorded seismic data is witnessed. This makes the handling of the seismic data rather daunting based on traditional approaches and therefore fuels the need for a more robust and reliable method. In this study, we investigate two deep learningbased models, termed 1D ResidualNeuralNetwork (ResNet) and multi-branch ResNet, for tackling the problem of seismic signal detection and phase identification, especially the later can be used in the case where multiple classes is organized in the hierarchical format. These methods are trained and tested on the dataset of the Southern California Seismic Network. Results demonstrate that the proposed methods can achieve robust performance for the detection of seismic signals, and the identification of seismic phases, even when the seismic events are of small magnitude and are masked by noise. Compared with previously proposed deep learning methods, the introduced frameworks achieve 4% improvement in earthquake monitoring, and a slight enhancement in seismic phase classification.
△ Less
Submitted 6 April, 2022;
originally announced April 2022.
-
A study on the effect of input data length on deep learning based magnitude classifier
Authors:
Megha Chakraborty,
Wei Li,
Johannes Faber,
Georg Ruempker,
Horst Stoecker,
Nishtha Srivastava
Abstract:
The rapid characterisation of earthquake parameters such as its magnitude is at the heart of Earthquake Early Warning (EEW). In traditional EEW methods the robustness in the estimation of earthquake parameters have been observed to increase with the length of input data. Since time is a crucial factor in EEW applications, in this paper we propose a deep learning based magnitude classifier and, fur…
▽ More
The rapid characterisation of earthquake parameters such as its magnitude is at the heart of Earthquake Early Warning (EEW). In traditional EEW methods the robustness in the estimation of earthquake parameters have been observed to increase with the length of input data. Since time is a crucial factor in EEW applications, in this paper we propose a deep learning based magnitude classifier and, further we investigate the effect of using five different durations of seismic waveform data after first P wave arrival of length 1s, 3s, 10s, 20s and 30s. This is accomplished by testing the performance of the proposed model that combines Convolution and Bidirectional Long-Short Term Memory units to classify waveforms based on their magnitude into three classes "noise", "low magnitude events" and "high magnitude events". Herein, any earthquake signal with magnitude equal to or above 5.0 is labelled as high magnitude. We show that the variation in the results produced by changing the length of the data, is no more than the inherent randomness in the trained models, due to their initialisation.
△ Less
Submitted 14 December, 2021;
originally announced December 2021.
-
AWESAM: A Python Module for Automated Volcanic Event Detection Applied to Stromboli
Authors:
Darius Fenner,
Georg Ruempker,
Wei Li,
Megha Chakraborty,
Johannes Faber,
Jonas Koehler,
Horst Stoecker,
Nishtha Srivastava
Abstract:
Many active volcanoes in the world exhibit Strombolian activity, which is typically characterized by relatively frequent mild events and also by rare and much more destructive major explosions and paroxysms. Detailed analyses of past major and minor events can help to understand the eruptive behavior of the volcano and the underlying physical and chemical processes. Catalogs of volcanic eruptions…
▽ More
Many active volcanoes in the world exhibit Strombolian activity, which is typically characterized by relatively frequent mild events and also by rare and much more destructive major explosions and paroxysms. Detailed analyses of past major and minor events can help to understand the eruptive behavior of the volcano and the underlying physical and chemical processes. Catalogs of volcanic eruptions may be established using continuous seismic recordings at stations in the proximity of volcanoes. However, in many cases, the analysis of the recordings relies heavily on the manual picking of events by human experts. Recently developed Machine Learning-based approaches require large training data sets which may not be available a priori. Here, we propose an alternative automated approach: the Adaptive-Window Volcanic Event Selection Analysis Module (AWESAM). This process of creating event catalogs consists of three main steps: (i) identification of potential volcanic events based on squared ground-velocity amplitudes, an adaptive MaxFilter, and a prominence threshold. (ii) catalog consolidation by comparing and verification of the initial detections based on recordings from two different seismic stations. (iii) identification and exclusion of signals from regional tectonic earthquakes. The software package is applied to publicly accessible continuous seismic recordings from two almost equidistant stations at Stromboli volcano in Italy. We tested AWESAM by comparison with a hand-picked catalog and found that around 95 percent of the eruptions with a signal-to-noise ratio above three are detected. In a first application, we derive a new amplitude-frequency relationship from over 290.000 volcanic events at Stromboli during 2019-2020. The module allows for a straightforward generalization and application to other volcanoes worldwide.
△ Less
Submitted 2 November, 2021;
originally announced November 2021.
-
EPick: Multi-Class Attention-based U-shaped Neural Network for Earthquake Detection and Seismic Phase Picking
Authors:
Wei Li,
Megha Chakraborty,
Darius Fenner,
Johannes Faber,
Kai Zhou,
Georg Ruempker,
Horst Stoecker,
Nishtha Srivastava
Abstract:
Earthquake detection and seismic phase picking not only play a crucial role in travel time estimation of body waves(P and S waves) but also in the localisation of the epicenter of the corresponding event. Generally, manual phase picking is a trustworthy and the optimum method to determine the phase arrival time, however, its capacity is restricted by available resources and time. Moreover, noisy s…
▽ More
Earthquake detection and seismic phase picking not only play a crucial role in travel time estimation of body waves(P and S waves) but also in the localisation of the epicenter of the corresponding event. Generally, manual phase picking is a trustworthy and the optimum method to determine the phase arrival time, however, its capacity is restricted by available resources and time. Moreover, noisy seismic data renders an additional critical challenge for fast and accurate phase picking. In this study, a deep learning based model, EPick, is proposed which benefits both from U shaped neural network (also called UNet)and attention mechanism, as a strong alternative for seismic event detection and phase picking. On one hand, the utilization of UNet structure enables addressing different levels of deep features. On the other hand, attention mechanism promotes the decoder in the UNet structure to focus on the efficient exploitation of the low-resolution features learned from the encoder part to achieve precise phase picking. Extensive experimental results demonstrate that EPick achieves better performance over the benchmark method, and show the models robustness when tested on a different seismic dataset.
△ Less
Submitted 6 September, 2021;
originally announced September 2021.
-
Sunda-arc seismicity: continuing increase of high-magnitude earthquakes since 2004
Authors:
Nishtha Srivastava,
Jonas Koehler,
F. Alejandro Nava,
Omar El Sayed,
Megha Chakraborty,
Jan Steinheimer,
Johannes Faber,
Alexander Kies,
Kiran Kumar Thingbaijam,
Kai Zhou,
Georg Ruempker,
Horst Stoecker
Abstract:
Spatial and temporal data for earthquakes with magnitude M greater than or equal to 6.5 can provide crucial information about the seismic history and potential for large earthquakes in a region. We analyzed approximately 313,500 events that occurred in the Sunda-arc region during the last 56 years, from 1964 to 2020, reported by the International Seismological Center. We report a persistent increa…
▽ More
Spatial and temporal data for earthquakes with magnitude M greater than or equal to 6.5 can provide crucial information about the seismic history and potential for large earthquakes in a region. We analyzed approximately 313,500 events that occurred in the Sunda-arc region during the last 56 years, from 1964 to 2020, reported by the International Seismological Center. We report a persistent increase in the annual number of the events with mb greater than or equal to 6.5. We tested this increase against the null hypothesis and discarded the possibility of the increase being due to random grou**s. The trend given by Auto-Regressive Integrated Moving Average suggests continuing increase of such large-magnitude events in the region during the next decade. At the same time, the computed Gutenberg Richter b value shows anomalies that can be related to the occurrence of the mega 2004 Sumatra earthquake, and to possible state of high tectonic stress in the eastern parts of the region.
△ Less
Submitted 9 September, 2022; v1 submitted 14 August, 2021;
originally announced August 2021.
-
What Sustained Multi-Disciplinary Research Can Achieve: The Space Weather Modeling Framework
Authors:
Tamas I. Gombosi,
Yuxi Chen,
Alex Glocer,
Zhenguang Huang,
Xianzhe Jia,
Michael W. Liemohn,
Ward B. Manchester,
Tuija Pulkkinen,
Nishtha Sachdeva,
Qusai Al Shidi,
Igor V. Sokolov,
Judit Szente,
Valeriy Tenishev,
Gabor Toth,
Bart van der Holst,
Daniel T. Welling,
Lulu Zhao,
Shasha Zou
Abstract:
MHD-based global space weather models have mostly been developed and maintained at academic institutions. While the "free spirit" approach of academia enables the rapid emergence and testing of new ideas and methods, the lack of long-term stability and support makes this arrangement very challenging. This paper describes a successful example of a university-based group, the Center of Space Environ…
▽ More
MHD-based global space weather models have mostly been developed and maintained at academic institutions. While the "free spirit" approach of academia enables the rapid emergence and testing of new ideas and methods, the lack of long-term stability and support makes this arrangement very challenging. This paper describes a successful example of a university-based group, the Center of Space Environment Modeling (CSEM) at the University of Michigan, that developed and maintained the Space Weather Modeling Framework (SWMF) and its core element, the BATS-R-US extended MHD code. It took a quarter of a century to develop this capability and reach its present level of maturity that makes it suitable for research use by the space physics community through the Community Coordinated Modeling Center (CCMC) as well as operational use by the NOAA Space Weather Prediction Center (SWPC).
△ Less
Submitted 27 May, 2021;
originally announced May 2021.
-
Validation of the Alfvén Wave Solar atmosphere Model (AWSoM) with Observations from the Low Corona to 1 AU
Authors:
N. Sachdeva,
B. van der Holst,
W. B. Manchester,
G. Tóth,
Y. Chen,
D. G. Lloveras,
A. M. Vásquez,
Philippe Lamy,
Julien Wojak,
B. V. Jackson,
H. -S. Yu,
C. J. Henney
Abstract:
We perform a validation study of the latest version of the Alfvén Wave Solar atmosphere Model (AWSoM) within the Space Weather Modeling Framework (SWMF). To do so, we compare the simulation results of the model with a comprehensive suite of observations for Carrington rotations representative of the solar minimum conditions extending from the solar corona to the heliosphere up to the Earth. In the…
▽ More
We perform a validation study of the latest version of the Alfvén Wave Solar atmosphere Model (AWSoM) within the Space Weather Modeling Framework (SWMF). To do so, we compare the simulation results of the model with a comprehensive suite of observations for Carrington rotations representative of the solar minimum conditions extending from the solar corona to the heliosphere up to the Earth. In the low corona ($r < 1.25$ \Rs), we compare with EUV images from both STEREO-A/EUVI and SDO/AIA and to three-dimensional (3-D) tomographic reconstructions of the electron temperature and density based on these same data. We also compare the model to tomographic reconstructions of the electron density from SOHO/LASCO observations ($2.55 < r < 6.0$\Rs). In the heliosphere, we compare model predictions of solar wind speed with velocity reconstructions from InterPlanetary Scintillation (IPS) observations. For comparison with observations near the Earth, we use OMNI data. Our results show that the improved AWSoM model performs well in quantitative agreement with the observations between the inner corona and 1 AU. The model now reproduces the fast solar wind speed in the polar regions. Near the Earth, our model shows good agreement with observations of solar wind velocity, proton temperature and density. AWSoM offers an extensive application to study the solar corona and larger heliosphere in concert with current and future solar missions as well as being well suited for space weather predictions.
△ Less
Submitted 17 October, 2019;
originally announced October 2019.
-
Dynamics of solar Coronal Mass Ejections: forces that impact their propagation
Authors:
Nishtha Sachdeva
Abstract:
We investigate the Sun-Earth dynamics of a set of 38 well-observed Coronal Mass Ejections(CMEs) using data from the STEREO, SOHO missions and WIND instrument. We seek to quantify the relative contributions of Lorentz force and aerodynamic drag on their propagation. The CMEs are 3D reconstructed using the Graduated Cylindrical Shell(GCS) model to derive observed CME parameters.Using a microphysical…
▽ More
We investigate the Sun-Earth dynamics of a set of 38 well-observed Coronal Mass Ejections(CMEs) using data from the STEREO, SOHO missions and WIND instrument. We seek to quantify the relative contributions of Lorentz force and aerodynamic drag on their propagation. The CMEs are 3D reconstructed using the Graduated Cylindrical Shell(GCS) model to derive observed CME parameters.Using a microphysical prescription of the drag coefficient,we find that solar wind aerodynamic drag adequately accounts for the dynamics of the fastest CMEs from as low as 3.5 Rs. For relatively slower CMEs, however, we find that when the drag-based model is initiated below the distances ranging from 12 to 50 Rs,the observed CME trajectories cannot be accounted for.This suggests that aerodynamic drag force dominates the dynamics of slower CMEs only above these heights.To investigate CME dynamics below the heights where aerodynamic drag dominates, we consider the Torus Instability model for the driving Lorentz force. We find that for fast CMEs,Lorentz forces become negligible in comparison to aerodynamic drag as early as 3.5-4 Rs.For slow CMEs, however, they become negligible only by 12-50 Rs.This justifies the success of the drag-only model for fast CMEs. In case of slow CMEs, the Lorentz force is only slightly smaller than the drag force even beyond 12-50 Rs.For these slow events,our results suggest that some of the magnetic flux carried by CMEs might be expended in expansion or heating. These dissipation effects might be important in describing the propagation of slower CMEs. To the best of our knowledge,this is the first systematic study in this regard using a diverse CME sample. A physical understanding of the forces that affect CME propagation and how they compare with each other at various heliocentric distances is an important ingredient in building tools for describing and predicting CME trajectories.
△ Less
Submitted 29 July, 2019;
originally announced July 2019.
-
CME propagation: Where does solar wind drag take over?
Authors:
Nishtha Sachdeva,
Prasad Subramanian,
Robin Colaninno,
Angelos Vourlidas
Abstract:
We investigate the Sun-Earth dynamics of a set of eight well observed solar coronal mass ejections (CMEs) using data from the STEREO spacecraft. We seek to quantify the extent to which momentum coupling between these CMEs and the ambient solar wind (i.e., the aerodynamic drag) influences their dynamics. To this end, we use results from a 3D flux rope model fit to the CME data. We find that solar w…
▽ More
We investigate the Sun-Earth dynamics of a set of eight well observed solar coronal mass ejections (CMEs) using data from the STEREO spacecraft. We seek to quantify the extent to which momentum coupling between these CMEs and the ambient solar wind (i.e., the aerodynamic drag) influences their dynamics. To this end, we use results from a 3D flux rope model fit to the CME data. We find that solar wind aerodynamic drag adequately accounts for the dynamics of the fastest CME in our sample. For the relatively slower CMEs, we find that drag-based models initiated below heliocentric distances ranging from 15 to 50 $R_{\odot}$ cannot account for the observed CME trajectories. This is at variance with the general perception that the dynamics of slow CMEs are influenced primarily by solar wind drag from a few $R_{\odot}$ onwards. Several slow CMEs propagate at roughly constant speeds above 15--50 $R_{\odot}$. Drag-based models initiated above these heights therefore require negligible aerodynamic drag to explain their observed trajectories.
△ Less
Submitted 21 August, 2015; v1 submitted 18 July, 2015;
originally announced July 2015.