-
CCAT: Detector Noise Limited Performance of the RFSoC-based Readout Electronics for mm/sub-mm/far-IR KIDs
Authors:
Adrian K. Sinclair,
James Burgoyne,
Anthony I. Huber,
Colin Murphy,
Steve K. Choi,
Cody J. Duell,
Zachary B. Huber,
Yaqiong Li,
Scott C. Chapman,
Michael D. Niemack,
Thomas Nikola,
Eve M. Vavagiakis,
Samantha Walker,
Jordan D. Wheeler,
Jason Austermann,
Lawrence Lin,
Ruixuan Xie,
Bugao Zou,
Philip D. Mauskopf
Abstract:
The Fred Young Submillimeter Telescope (FYST), on Cerro Chajnantor in the Atacama desert of Chile, will conduct wide-field and small deep-field surveys of the sky with more than 100,000 detectors on the Prime-Cam instrument. Kinetic inductance detectors (KIDs) were chosen as the primary sensor technology for their high density focal plane packing. Additionally, they benefit from low cost, ease of…
▽ More
The Fred Young Submillimeter Telescope (FYST), on Cerro Chajnantor in the Atacama desert of Chile, will conduct wide-field and small deep-field surveys of the sky with more than 100,000 detectors on the Prime-Cam instrument. Kinetic inductance detectors (KIDs) were chosen as the primary sensor technology for their high density focal plane packing. Additionally, they benefit from low cost, ease of fabrication, and simplified cryogenic readout, which are all beneficial for successful deployment at scale. The cryogenic multiplexing complexity is pulled out of the cryostat and is instead pushed into the digital signal processing of the room temperature electronics. Using the Xilinx Radio Frequency System on a Chip (RFSoC), a highly multiplexed KID readout was developed for the first light Prime-Cam and commissioning Mod-Cam instruments. We report on the performance of the RFSoC-based readout with multiple detector arrays in various cryogenic setups. Specifically we demonstrate detector noise limited performance of the RFSoC-based readout under the expected optical loading conditions.
△ Less
Submitted 21 June, 2024;
originally announced June 2024.
-
CCAT-prime: The 850 GHz camera for Prime-Cam on FYST
Authors:
Scott C. Chapman,
Anthony I. Huber,
Adrian K. Sinclair,
Jordan D. Wheeler,
Jason E. Austermann,
James Beall,
James Burgoyne,
Steve K. Choi,
Abigail Crites,
Cody J. Duell,
Jesslyn Devina,
Jiansong Gao,
Mike Fich,
Doug Henke,
Terry Herter,
Doug Johnstone,
Lewis B. G. Knee,
Michael D. Niemack,
Kayla M. Rossi,
Gordon Stacey,
Joel Tsuchitori,
Joel Ullom,
Jeff Van Lanen,
Eve M. Vavagiakis,
Michael Vissers
, et al. (1 additional authors not shown)
Abstract:
The Fred Young Submillimeter Telescope (FYST) at the Cerro-Chajnantor Atacama Telescope prime (CCAT- prime) Facility will host Prime-Cam as a powerful, first generation camera with imaging polarimeters working at several wavelengths and spectroscopic instruments aimed at intensity map** during the Epoch of Reionization. Here we introduce the 850 GHz (350 micron) instrument module. This will be t…
▽ More
The Fred Young Submillimeter Telescope (FYST) at the Cerro-Chajnantor Atacama Telescope prime (CCAT- prime) Facility will host Prime-Cam as a powerful, first generation camera with imaging polarimeters working at several wavelengths and spectroscopic instruments aimed at intensity map** during the Epoch of Reionization. Here we introduce the 850 GHz (350 micron) instrument module. This will be the highest frequency module in Prime-Cam and the most novel for astronomical and cosmological surveys, taking full advantage of the atmospheric transparency at the high 5600 meter CCAT-prime siting on Cerro Chajnantor. With a 1.1 deg diameter field, the 850 GHz module will deploy ~40,000 Kinetic Inductance Detectors (KIDs) with Silicon platelet feedhorn coupling (both fabricated at NIST), and will provide unprecedented broadband intensity and polarization measurement capabilities. The 850 GHz module will be key to addressing pressing astrophysical questions regarding galaxy formation, Big Bang cosmology, and star formation within our own Galaxy. We present the motivation and overall design for the module, and initial laboratory characterization.
△ Less
Submitted 22 August, 2022;
originally announced August 2022.
-
CCAT-prime: RFSoC Based Readout for Frequency Multiplexed Kinetic Inductance Detectors
Authors:
Adrian K. Sinclair,
Ryan C. Stephenson,
Cody A. Roberson,
Eric L. Weeks,
James Burgoyne,
Anthony I. Huber,
Philip M. Mauskopf,
Scott C. Chapman,
Jason E. Austermann,
Steve K. Choi,
Cody J. Duell,
Michel Fich,
Christopher E. Groppi,
Zachary Huber,
Michael D. Niemack,
Thomas Nikola,
Kayla M. Rossi,
Adhitya Sriram,
Gordon J. Stacey,
Erik Szakiel,
Joel Tsuchitori,
Eve M. Vavagiakis,
Jordan D. Wheeler,
the CCAT-prime collaboration
Abstract:
The Prime-Cam instrument on the Fred Young Submillimeter Telescope (FYST) is expected to be the largest deployment of millimeter and submillimeter sensitive kinetic inductance detectors to date. To read out these arrays efficiently, a microwave frequency multiplexed readout has been designed to run on the Xilinx Radio Frequency System on a Chip (RFSoC). The RFSoC has dramatically improved every ca…
▽ More
The Prime-Cam instrument on the Fred Young Submillimeter Telescope (FYST) is expected to be the largest deployment of millimeter and submillimeter sensitive kinetic inductance detectors to date. To read out these arrays efficiently, a microwave frequency multiplexed readout has been designed to run on the Xilinx Radio Frequency System on a Chip (RFSoC). The RFSoC has dramatically improved every category of size, weight, power, cost, and bandwidth over the previous generation readout systems. We describe a baseline firmware design which can read out four independent RF networks each with 500 MHz of bandwidth and 1000 detectors for ~30 W. The overall readout architecture is a combination of hardware, gateware/firmware, software, and network design. The requirements of the readout are driven by the 850 GHz instrument module of the 7-module Prime-Cam instrument. These requirements along with other constraints which have led to critical design choices are highlighted. Preliminary measurements of the system phase noise and dynamic range are presented.
△ Less
Submitted 15 August, 2022;
originally announced August 2022.
-
Optical design concept of the CMB-S4 large-aperture telescopes and cameras
Authors:
Patricio A. Gallardo,
Bradford Benson,
John Carlstrom,
Simon R. Dicker,
Nick Emerson,
Jon E. Gudmundsson,
Richard Hills,
Michele Limon,
Jeff McMahon,
Michael D. Niemack,
Johanna M. Nagy,
Stephen Padin,
John Ruhl,
Sara M. Simon,
the CMB-S4 collaboration
Abstract:
CMB-S4 -- the next-generation ground-based cosmic microwave background (CMB) experiment - will significantly advance the sensitivity of CMB measurements and improve our understanding of the origin and evolution of the universe. CMB-S4 will deploy large-aperture telescopes fielding hundreds of thousands of detectors at millimeter wavelengths. We present the baseline optical design concept of the la…
▽ More
CMB-S4 -- the next-generation ground-based cosmic microwave background (CMB) experiment - will significantly advance the sensitivity of CMB measurements and improve our understanding of the origin and evolution of the universe. CMB-S4 will deploy large-aperture telescopes fielding hundreds of thousands of detectors at millimeter wavelengths. We present the baseline optical design concept of the large-aperture CMB-S4 telescopes, which consists of two optical configurations: (i) a new off-axis, three-mirror, free-form anastigmatic design and (ii) the existing coma-corrected crossed-Dragone design. We also present an overview of the optical configuration of the array of silicon optics cameras that will populate the focal plane with 85 diffraction-limited optics tubes covering up to 9 degrees of field of view, up to $1.1 \, \rm mm$ in wavelength. We describe the computational optimization methods that were put in place to implement the families of designs described here and give a brief update on the current status of the design effort.
△ Less
Submitted 20 July, 2022;
originally announced July 2022.
-
The Simons Observatory: Magnetic Shielding Measurements for the Universal Multiplexing Module
Authors:
Zachary B. Huber,
Yaqiong Li,
Eve M. Vavagiakis,
Steve K. Choi,
Jake Connors,
Nicholas F. Cothard,
Cody J. Duell,
Nicholas Galitzki,
Erin Healy,
Johannes Hubmayr,
Bradley R. Johnson,
Benjamin Keller,
Heather McCarrick,
Michael D. Niemack,
Yuhan Wang,
Zhilei Xu,
Kaiwen Zheng
Abstract:
The Simons Observatory (SO) includes four telescopes that will measure the temperature and polarization of the cosmic microwave background using over 60,000 highly sensitive transition-edge bolometers (TES). These multichroic TES bolometers are read out by a microwave RF SQUID multiplexing system with a multiplexing factor of 910. Given that both TESes and SQUIDs are susceptible to magnetic field…
▽ More
The Simons Observatory (SO) includes four telescopes that will measure the temperature and polarization of the cosmic microwave background using over 60,000 highly sensitive transition-edge bolometers (TES). These multichroic TES bolometers are read out by a microwave RF SQUID multiplexing system with a multiplexing factor of 910. Given that both TESes and SQUIDs are susceptible to magnetic field pickup and that it is hard to predict how they will respond to such fields, it is important to characterize the magnetic response of these systems empirically. This information can then be used to limit spurious signals by informing magnetic shielding designs for the detectors and readout. This paper focuses on measurements of magnetic pickup with different magnetic shielding configurations for the SO universal multiplexing module (UMM), which contains the SQUIDs, associated resonators, and TES bias circuit. The magnetic pickup of a prototype UMM was tested under three shielding configurations: no shielding (copper packaging), aluminum packaging for the UMM, and a tin/lead-plated shield surrounding the entire dilution refrigerator 100 mK cold stage. The measurements show that the aluminum packaging outperforms the copper packaging by a shielding factor of 8-10, and adding the tin/lead-plated 1K shield further increases the relative shielding factor in the aluminum configuration by 1-2 orders of magnitude.
△ Less
Submitted 1 March, 2023; v1 submitted 22 November, 2021;
originally announced November 2021.
-
Simons Observatory Focal-Plane Module: In-lab Testing and Characterization Program
Authors:
Yuhan Wang,
Kaiwen Zheng,
Zachary Atkins,
Jason Austermann,
Tanay Bhandarkar,
Steve K. Choi,
Shannon M. Duff,
Daniel Dutcher,
Nicholas Galitzki,
Erin Healy,
Zachary B. Huber,
Johannes Hubmayr,
Bradley R. Johnson,
Jack Lashner,
Yaqiong Li,
Heather McCarrick,
Michael D. Niemack,
Joseph Seibert,
Maximiliano Silva-Feaver,
Rita Sonka,
Suzanne T. Staggs,
Eve Vavagiakis,
Zhilei Xu
Abstract:
The Simons Observatory (SO) is a ground-based cosmic microwave background instrument to be sited in the Atacama Desert in Chile. SO will deploy 60,000 transition-edge sensor bolometers in 49 separate focal-plane modules across a suite of four telescopes covering three dichroic bands termed low frequency (LF), mid frequency (MF) and ultra-high frequency (UHF). Each MF and UHF focal-plane module pac…
▽ More
The Simons Observatory (SO) is a ground-based cosmic microwave background instrument to be sited in the Atacama Desert in Chile. SO will deploy 60,000 transition-edge sensor bolometers in 49 separate focal-plane modules across a suite of four telescopes covering three dichroic bands termed low frequency (LF), mid frequency (MF) and ultra-high frequency (UHF). Each MF and UHF focal-plane module packages 1720 optical detectors and corresponding 100 mK microwave SQUID multiplexing readout components. In this paper we describe the testing program we have developed for high-throughput validation of the modules after they are assembled. The validation requires measurements of the yield, saturation powers, time constants, noise properties and optical efficiencies. Additional measurements will be performed for further characterizations as needed. We describe the methods developed and demonstrate preliminary results from initial testing of prototype modules.
△ Less
Submitted 5 July, 2022; v1 submitted 22 November, 2021;
originally announced November 2021.
-
The Simons Observatory: HoloSim-ML: machine learning applied to the efficient analysis of radio holography measurements of complex optical systems
Authors:
Grace E. Chesmore,
Alexandre E. Adler,
Nicholas F. Cothard,
Nadia Dachlythra,
Patricio A. Gallardo,
Jon Gudmundsson,
Bradley R. Johnson,
Michele Limon,
Jeff McMahon,
Federico Nati,
Michael D. Niemack,
Giuseppe Puglisi,
Sara M. Simon,
Edward J. Wollack,
Kevin Wolz,
Zhilei Xu,
Ningfeng Zhu
Abstract:
Near-field radio holography is a common method for measuring and aligning mirror surfaces for millimeter and sub-millimeter telescopes. In instruments with more than a single mirror, degeneracies arise in the holography measurement, requiring multiple measurements and new fitting methods. We present HoloSim-ML, a Python code for beam simulation and analysis of radio holography data from complex op…
▽ More
Near-field radio holography is a common method for measuring and aligning mirror surfaces for millimeter and sub-millimeter telescopes. In instruments with more than a single mirror, degeneracies arise in the holography measurement, requiring multiple measurements and new fitting methods. We present HoloSim-ML, a Python code for beam simulation and analysis of radio holography data from complex optical systems. This code uses machine learning to efficiently determine the position of hundreds of mirror adjusters on multiple mirrors with few micron accuracy. We apply this approach to the example of the Simons Observatory 6m telescope.
△ Less
Submitted 5 October, 2021; v1 submitted 8 July, 2021;
originally announced July 2021.
-
Simons Observatory Microwave SQUID Multiplexing Readout -- Cryogenic RF Amplifier and Coaxial Chain Design
Authors:
Mayuri Sathyanarayana Rao,
Maximiliano Silva-Feaver,
Aamir Ali,
Kam Arnold,
Peter Ashton,
Bradley J. Dober,
Cody J. Duell,
Shannon M. Duff,
Nicholas Galitzki,
Erin Healy,
Shawn Henderson,
Shuay-Pwu Patty Ho,
Jonathan Hoh,
Anna M. Kofman,
Akito Kusaka,
Adrian T. Lee,
Aashrita Mangu,
Justin Mathewson,
Philip Mauskopf,
Heather McCarrick,
Jenna Moore,
Michael D. Niemack,
Christopher Raum,
Maria Salatino,
Trevor Sasse
, et al. (11 additional authors not shown)
Abstract:
The Simons Observatory (SO) is an upcoming polarization-sensitive Cosmic Microwave Background (CMB) experiment on the Cerro Toco Plateau (Chile) with large overlap with other optical and infrared surveys (e.g., DESI, LSST, HSC). To enable the readout of \bigO(10,000) detectors in each of the four telescopes of SO, we will employ the microwave SQUID multiplexing technology. With a targeted multiple…
▽ More
The Simons Observatory (SO) is an upcoming polarization-sensitive Cosmic Microwave Background (CMB) experiment on the Cerro Toco Plateau (Chile) with large overlap with other optical and infrared surveys (e.g., DESI, LSST, HSC). To enable the readout of \bigO(10,000) detectors in each of the four telescopes of SO, we will employ the microwave SQUID multiplexing technology. With a targeted multiplexing factor of \bigO{(1,000)}, microwave SQUID multiplexing has never been deployed on the scale needed for SO. Here we present the design of the cryogenic coaxial cable and RF component chain that connects room temperature readout electronics to superconducting resonators that are coupled to Transition Edge Sensor bolometers operating at sub-Kelvin temperatures. We describe design considerations including cryogenic RF component selection, system linearity, noise, and thermal power dissipation.
△ Less
Submitted 19 March, 2020;
originally announced March 2020.
-
Develo** AlMn films for Argonne TES fabrication
Authors:
E. M. Vavagiakis,
N. F. Cothard,
J. R. Stevens,
C. L. Chang,
M. D. Niemack,
G. Wang,
V. G. Yefremenko,
J. Zhang
Abstract:
The reference design for the next-generation cosmic microwave background (CMB) experiment, CMB-S4, relies on large arrays of transition edge sensor (TES) bolometers coupled to Superconducting Quantum Interference Device (SQUID)-based readout systems. Map** the CMB to near cosmic variance limits will enable the search for signatures of inflation and constrain dark energy and neutrino physics. AlM…
▽ More
The reference design for the next-generation cosmic microwave background (CMB) experiment, CMB-S4, relies on large arrays of transition edge sensor (TES) bolometers coupled to Superconducting Quantum Interference Device (SQUID)-based readout systems. Map** the CMB to near cosmic variance limits will enable the search for signatures of inflation and constrain dark energy and neutrino physics. AlMn TESes provide simple film manufacturing and highly uniform arrays over large areas to meet the requirements of the CMB-S4 experiment. TES parameters such as critical temperature and normal resistance must be tuned to experiment specifications and can be varied based on geometry and steps in the fabrication process such as deposition layering, geometry, and baking time and temperature. Using four-terminal sensing, we measured $T_C$ and $R_N$ of AlMn 2000 ppm films and devices of varying thicknesses fabricated at Argonne National Laboratory to motivate device geometries and fabrication processes to tune $T_C$ to 150-200 mK and $R_N$ to $\sim$10 mOhms. Measurements of IV curves and time constants for the resulting devices of varying leg length were made using time-division SQUID multiplexing, and determined $T_C$, $G$, $k$, $f_{3db}$, and $R_N$. We present the results of these tests along with the geometries and fabrication steps used to tune the device parameters to the desired limits.
△ Less
Submitted 22 October, 2019;
originally announced October 2019.
-
Visualizing probabilistic models: Intensive Principal Component Analysis
Authors:
Katherine N. Quinn,
Colin B. Clement,
Francesco De Bernardis,
Michael D. Niemack,
James P. Sethna
Abstract:
Unsupervised learning makes manifest the underlying structure of data without curated training and specific problem definitions. However, the inference of relationships between data points is frustrated by the `curse of dimensionality' in high-dimensions. Inspired by replica theory from statistical mechanics, we consider replicas of the system to tune the dimensionality and take the limit as the n…
▽ More
Unsupervised learning makes manifest the underlying structure of data without curated training and specific problem definitions. However, the inference of relationships between data points is frustrated by the `curse of dimensionality' in high-dimensions. Inspired by replica theory from statistical mechanics, we consider replicas of the system to tune the dimensionality and take the limit as the number of replicas goes to zero. The result is the intensive embedding, which is not only isometric (preserving local distances) but allows global structure to be more transparently visualized. We develop the Intensive Principal Component Analysis (InPCA) and demonstrate clear improvements in visualizations of the Ising model of magnetic spins, a neural network, and the dark energy cold dark matter (ΛCDM) model as applied to the Cosmic Microwave Background.
△ Less
Submitted 10 May, 2019; v1 submitted 5 October, 2018;
originally announced October 2018.
-
Studies of Systematic Uncertainties for Simons Observatory: Optical Effects and Sensitivity Considerations
Authors:
Patricio A. Gallardo,
Jon Gudmundsson,
Brian J. Koopman,
Frederick T. Matsuda,
Sara M. Simon,
Aamir Ali,
Sean Bryan,
Yuji Chinone,
Gabriele Coppi,
Nicholas Cothard,
Mark J. Devlin,
Simon Dicker,
Giulio Fabbian,
Nicholas Galitzki,
Charles A. Hill,
Brian Keating,
Akito Kusaka,
Jacob Lashner,
Adrian T. Lee,
Michele Limon,
Philip D. Mauskopf,
Jeff McMahon,
Federico Nati,
Michael D. Niemack,
John L. Orlowski-Scherer
, et al. (10 additional authors not shown)
Abstract:
The Simons Observatory (SO) is a new experiment that aims to measure the cosmic microwave background (CMB) in temperature and polarization. SO will measure the polarized sky over a large range of microwave frequencies and angular scales using a combination of small ($\sim0.5 \, \rm m$) and large ($\sim 6\, \rm m $) aperture telescopes and will be located in the Atacama Desert in Chile. This work i…
▽ More
The Simons Observatory (SO) is a new experiment that aims to measure the cosmic microwave background (CMB) in temperature and polarization. SO will measure the polarized sky over a large range of microwave frequencies and angular scales using a combination of small ($\sim0.5 \, \rm m$) and large ($\sim 6\, \rm m $) aperture telescopes and will be located in the Atacama Desert in Chile. This work is part of a series of papers studying calibration, sensitivity, and systematic errors for SO. In this paper, we discuss current efforts to model optical systematic effects, how these have been used to guide the design of the SO instrument, and how these studies can be used to inform instrument design of future experiments like CMB-S4. While optical systematics studies are underway for both the small aperture and large aperture telescopes, we limit the focus of this paper to the more mature large aperture telescope design for which our studies include: pointing errors, optical distortions, beam ellipticity, cross-polar response, instrumental polarization rotation and various forms of sidelobe pickup.
△ Less
Submitted 15 August, 2018;
originally announced August 2018.
-
Far Sidelobes from Baffles and Telescope Support Structures in the Atacama Cosmology Telescope
Authors:
Patricio A. Gallardo,
Nicholas F. Cothard,
Roberto Puddu,
Rolando Dünner,
Brian J. Koopman,
Michael D. Niemack,
Sara M. Simon,
Edward J. Wollack
Abstract:
The Atacama Cosmology Telescope (ACT) is a 6 m telescope located in the Atacama Desert, designed to measure the cosmic microwave background (CMB) with arcminute resolution. ACT, with its third generation polarization sensitive array, Advanced ACTPol, is being used to measure the anisotropies of the CMB in five frequency bands in large areas of the sky ($\sim 15,000$ $\rm deg^2$). These measurement…
▽ More
The Atacama Cosmology Telescope (ACT) is a 6 m telescope located in the Atacama Desert, designed to measure the cosmic microwave background (CMB) with arcminute resolution. ACT, with its third generation polarization sensitive array, Advanced ACTPol, is being used to measure the anisotropies of the CMB in five frequency bands in large areas of the sky ($\sim 15,000$ $\rm deg^2$). These measurements are designed to characterize the large scale structure of the universe, test cosmological models and constrain the sum of the neutrino masses. As the sensitivity of these wide surveys increases, the control and validation of the far sidelobe response becomes increasingly important and is particularly challenging as multiple reflections, spillover, diffraction and scattering become difficult to model and characterize at the required levels. In this work, we present a ray trace model of the ACT upper structure which is used to describe much of the observed far sidelobe pattern. This model combines secondary mirror spillover measurements with a 3D CAD model based on photogrammetry measurements to simulate the beam of the camera and the comoving ground shield. This simulation shows qualitative agreement with physical optics tools and features observed in far sidelobe measurements. We present this method as an efficient first-order calculation that, although it does not capture all diffraction effects, informs interactions between the structural components of the telescope and the optical path, which can then be combined with more computationally intensive physical optics calculations. This method can be used to predict sidelobe patterns in the design stage of future optical systems such as the Simons Observatory, CCAT-prime, and CMB Stage IV.
△ Less
Submitted 15 August, 2018;
originally announced August 2018.
-
A Study of Al-Mn Transition Edge Sensor Engineering for Stability
Authors:
E. M. George,
J. E. Austermann,
J. A. Beall,
D. Becker,
B. A. Benson,
L. E. Bleem,
J. E. Carlstrom,
C. L. Chang,
H- M. Cho,
A. T. Crites,
M. A. Dobbs,
W. Everett,
N. W. Halverson,
J. W. Henning,
G. C. Hilton,
W. L. Holzapfel,
J. Hubmayr,
K. D. Irwin,
D. Li,
M. Lueker,
J. J. McMahon,
J. Mehl,
J. Montgomery,
T. Natoli,
J. P. Nibarger
, et al. (10 additional authors not shown)
Abstract:
The stability of Al-Mn transition edge sensor (TES) bolometers is studied as we vary the engineered TES transition, heat capacity, and/or coupling between the heat capacity and TES. We present thermal structure measurements of each of the 39 designs tested. The data is accurately fit by a two-body bolometer model, which allows us to extract the basic TES parameters that affect device stability. We…
▽ More
The stability of Al-Mn transition edge sensor (TES) bolometers is studied as we vary the engineered TES transition, heat capacity, and/or coupling between the heat capacity and TES. We present thermal structure measurements of each of the 39 designs tested. The data is accurately fit by a two-body bolometer model, which allows us to extract the basic TES parameters that affect device stability. We conclude that parameters affecting device stability can be engineered for optimal device operation, and present the model parameters extracted for the different TES designs.
△ Less
Submitted 10 November, 2013;
originally announced November 2013.
-
Large-aperture wide-bandwidth antireflection-coated silicon lenses for millimeter wavelengths
Authors:
R. Datta,
C. D. Munson,
M. D. Niemack,
J. J. McMahon,
J. Britton,
E. J. Wollack,
J. Beall,
M. J. Devlin,
J. Fowler,
P. Gallardo,
J. Hubmayr,
K. Irwin,
L. Newburgh,
J. P. Nibarger,
L. Page,
M. A. Quijada,
B. L. Schmitt,
S. T. Staggs,
R. Thornton,
L. Zhang
Abstract:
The increasing scale of cryogenic detector arrays for sub-millimeter and millimeter wavelength astrophysics has led to the need for large aperture, high index of refraction, low loss, cryogenic refracting optics. Silicon with n = 3.4, low loss, and relatively high thermal conductivity is a nearly optimal material for these purposes, but requires an antireflection (AR) coating with broad bandwidth,…
▽ More
The increasing scale of cryogenic detector arrays for sub-millimeter and millimeter wavelength astrophysics has led to the need for large aperture, high index of refraction, low loss, cryogenic refracting optics. Silicon with n = 3.4, low loss, and relatively high thermal conductivity is a nearly optimal material for these purposes, but requires an antireflection (AR) coating with broad bandwidth, low loss, low reflectance, and a matched coefficient of thermal expansion. We present an AR coating for curved silicon optics comprised of subwavelength features cut into the lens surface with a custom three axis silicon dicing saw. These features constitute a metamaterial that behaves as a simple dielectric coating. We have fabricated and coated silicon lenses as large as 33.4 cm in diameter with coatings optimized for use between 125-165 GHz. Our design reduces average reflections to a few tenths of a percent for angles of incidence up to 30 degrees with low cross-polarization. We describe the design, tolerance, manufacture, and measurements of these coatings and present measurements of the optical properties of silicon at millimeter wavelengths at cryogenic and room temperatures. This coating and lens fabrication approach is applicable from centimeter to sub-millimeter wavelengths and can be used to fabricate coatings with greater than octave bandwidth.
△ Less
Submitted 17 July, 2013;
originally announced July 2013.
-
SCUBA-2: The 10000 pixel bolometer camera on the James Clerk Maxwell Telescope
Authors:
W. S. Holland,
D. Bintley,
E. L. Chapin,
A. Chrysostomou,
G. R. Davis,
J. T. Dempsey,
W. D. Duncan,
M. Fich,
P. Friberg,
M. Halpern,
K. D. Irwin,
T. Jenness,
B. D. Kelly,
M. J. MacIntosh,
E. I. Robson,
D. Scott,
P. A. R. Ade,
E. Atad-Ettedgui,
D. S. Berry,
S. C. Craig,
X. Gao,
A. G. Gibb,
G. C. Hilton,
M. I. Hollister,
J. B. Kycia
, et al. (24 additional authors not shown)
Abstract:
SCUBA-2 is an innovative 10000 pixel bolometer camera operating at submillimetre wavelengths on the James Clerk Maxwell Telescope (JCMT). The camera has the capability to carry out wide-field surveys to unprecedented depths, addressing key questions relating to the origins of galaxies, stars and planets. With two imaging arrays working simultaneously in the atmospheric windows at 450 and 850 micro…
▽ More
SCUBA-2 is an innovative 10000 pixel bolometer camera operating at submillimetre wavelengths on the James Clerk Maxwell Telescope (JCMT). The camera has the capability to carry out wide-field surveys to unprecedented depths, addressing key questions relating to the origins of galaxies, stars and planets. With two imaging arrays working simultaneously in the atmospheric windows at 450 and 850 microns, the vast increase in pixel count means that SCUBA-2 maps the sky 100-150 times faster than the previous SCUBA instrument. In this paper we present an overview of the instrument, discuss the physical characteristics of the superconducting detector arrays, outline the observing modes and data acquisition, and present the early performance figures on the telescope. We also showcase the capabilities of the instrument via some early examples of the science SCUBA-2 has already undertaken. In February 2012, SCUBA-2 began a series of unique legacy surveys for the JCMT community. These surveys will take 2.5 years and the results are already providing complementary data to the shorter wavelength, shallower, larger-area surveys from Herschel. The SCUBA-2 surveys will also provide a wealth of information for further study with new facilities such as ALMA, and future telescopes such as CCAT and SPICA.
△ Less
Submitted 16 January, 2013;
originally announced January 2013.
-
Infrared dielectric properties of low-stress silicon nitride
Authors:
Giuseppe Cataldo,
James A. Beall,
Hsiao-Mei Cho,
Brendan McAndrew,
Michael D. Niemack,
Edward J. Wollack
Abstract:
Silicon nitride thin films play an important role in the realization of sensors, filters, and high-performance circuits. Estimates of the dielectric function in the far- and mid-infrared regime are derived from the observed transmittance spectra for a commonly employed low-stress silicon nitride formulation. The experimental, modeling, and numerical methods used to extract the dielectric parameter…
▽ More
Silicon nitride thin films play an important role in the realization of sensors, filters, and high-performance circuits. Estimates of the dielectric function in the far- and mid-infrared regime are derived from the observed transmittance spectra for a commonly employed low-stress silicon nitride formulation. The experimental, modeling, and numerical methods used to extract the dielectric parameters with an accuracy of approximately 4% are presented.
△ Less
Submitted 13 September, 2012;
originally announced September 2012.
