-
Data harvesting vs data farming: A study of the importance of variation vs sample size in deep learning-based auto-segmentation for breast cancer patients
Authors:
ES Buhl,
E Maae,
LW Matthiessen,
MH Nielsen,
M Maraldo,
M Møller,
S Elleberg,
SAJ Al-Rawi,
BV Offersen,
SS Korreman
Abstract:
The aim of this study was to investigate the difference in output, when training a model in three different scenarios: a large clinical delineated data set (with 700/78 patients for training/testing, from the Danish Breast Cancer Group (DBCG) RT Nation Study), a clinical but curated dataset (with 328/36 patients for training/testing, from the DBCG RT Nation Study) and a smaller, but dedicated data…
▽ More
The aim of this study was to investigate the difference in output, when training a model in three different scenarios: a large clinical delineated data set (with 700/78 patients for training/testing, from the Danish Breast Cancer Group (DBCG) RT Nation Study), a clinical but curated dataset (with 328/36 patients for training/testing, from the DBCG RT Nation Study) and a smaller, but dedicated data set created by delineation experts (with 123/14 patients for training/testing, consensus delineations created by delineation experts). The model performance was estimated based on the performance metrics dice similarity coefficient (DSC), Hausdorff 95th percentile (HD95) and mean surface distance (MSD). Models were tested in test sets from their own cohort, and afterwards also compared in the dedicated data test set. The difference between model output was finally estimated by measuring the mean width and cranial caudal length of the model output for the models. When testing the model output between the clinical models and the dedicated models in their own test set, the two clinical models had a poorer performance, than the dedicated models, but not all metrics showed statistically significance. When testing the models in the dedicated data, the dedicated model showed a slightly better performance, along with fewer segmentation outliers. As a way of taking advantage of the strength from both types of data set, it could be an option to use a large clinical data set as a baseline model, and then finetune with smaller sized cohorts with dedicated delineations.
△ Less
Submitted 4 April, 2024;
originally announced April 2024.
-
Disentangling the Evolution of Electrons and Holes in photoexcited ZnO nanoparticles
Authors:
Christopher J. Milne,
Natalia Nagornova,
Thomas Pope,
Hui-Yuan Chen,
Thomas Rossi,
Jakub Szlachetko,
Wojciech Gawelda,
Alexander Britz,
Tim B. van Drie,
Leonardo Sala,
Simon Ebner,
Tetsuo Katayama,
Stephen H. Southworth,
Gilles Doumy,
Anne Marie March,
C. Stefan Lehmann,
Melanie Mucke,
Denys Iablonskyi,
Yoshiaki Kumagai,
Gregor Knopp,
Koji Motomura,
Tadashi Togashi,
Shigeki Owada,
Makina Yabashi,
Martin M. Nielsen
, et al. (5 additional authors not shown)
Abstract:
The evolution of charge carriers in photoexcited room temperature ZnO nanoparticles in solution is investigated using ultrafast ultraviolet photoluminescence spectroscopy, ultrafast Zn K-edge absorption spectroscopy and ab-initio molecular dynamics (MD) simulations. The photoluminescence is excited at 4.66 eV, well above the band edge, and shows that electron cooling in the conduction band and exc…
▽ More
The evolution of charge carriers in photoexcited room temperature ZnO nanoparticles in solution is investigated using ultrafast ultraviolet photoluminescence spectroscopy, ultrafast Zn K-edge absorption spectroscopy and ab-initio molecular dynamics (MD) simulations. The photoluminescence is excited at 4.66 eV, well above the band edge, and shows that electron cooling in the conduction band and exciton formation occur in <500 fs, in excellent agreement with theoretical predictions. The X-ray absorption measurements, obtained upon excitation close to the band edge at 3.49 eV, are sensitive to the migration and trap** of holes. They reveal that the 2 ps transient largely reproduces the previously reported transient obtained at 100 ps time delay in synchrotron studies. In addition, the X-ray absorption signal is found to rise in ~1.4 ps, which we attribute to the diffusion of holes through the lattice prior to their trap** at singly-charged oxygen vacancies. Indeed, the MD simulations show that impulsive trap** of holes induces an ultrafast expansion of the cage of Zn atoms in <200 fs, followed by an oscillatory response at a frequency of ~100 cm-1, which corresponds to a phonon mode of the system involving the Zn sub-lattice.
△ Less
Submitted 6 October, 2023;
originally announced October 2023.
-
Long-Lived Coherent Acoustic Phonons in Epitaxially Grown III-V Adiabatic Cavities
Authors:
Muhammad Hanif,
Milos Dubajic,
Sandeep. J. Sreerag,
Rajeev N. Kini,
Gavin J. Conibeer,
Michael P. Nielsen,
Stephen P. Bremner
Abstract:
We provide evidence of strongly confined coherent acoustic phonons inside high quality factor phononic cavities that exhibit tailoredphonon potentials. Using GaAs/AlAs quasiperiodic superlattices, these functional phonon potentials are realized by adiabatically changing the layer thicknesses along the growth direction. Room temperature ultrafast vibrational spectroscopy reveals discrete phonon lev…
▽ More
We provide evidence of strongly confined coherent acoustic phonons inside high quality factor phononic cavities that exhibit tailoredphonon potentials. Using GaAs/AlAs quasiperiodic superlattices, these functional phonon potentials are realized by adiabatically changing the layer thicknesses along the growth direction. Room temperature ultrafast vibrational spectroscopy reveals discrete phonon levels in the range of $\approx 96-101$ GHz. Additionally, we confirm that phononic cavities significantly retard the energy loss rate of the photoexcited carriers as evidenced by time-resolved photoluminescence measurements. These results highlight the potential of opto-phononic devices that can bridge the divide between phononics and optoelectronics by concurrently engineering electronic and phononic properties.
△ Less
Submitted 21 February, 2024; v1 submitted 4 March, 2023;
originally announced March 2023.
-
Robust Cross-vendor Mammographic Texture Models Using Augmentation-based Domain Adaptation for Long-term Breast Cancer Risk
Authors:
Andreas D. Lauritzen,
My Catarina von Euler-Chelpin,
Elsebeth Lynge,
Ilse Vejborg,
Mads Nielsen,
Nico Karssemeijer,
Martin Lillholm
Abstract:
Purpose: Risk-stratified breast cancer screening might improve early detection and efficiency without comprising quality. However, modern mammography-based risk models do not ensure adaptation across vendor-domains and rely on cancer precursors, associated with short-term risk, which might limit long-term risk assessment. We report a cross-vendor mammographic texture model for long-term risk. Appr…
▽ More
Purpose: Risk-stratified breast cancer screening might improve early detection and efficiency without comprising quality. However, modern mammography-based risk models do not ensure adaptation across vendor-domains and rely on cancer precursors, associated with short-term risk, which might limit long-term risk assessment. We report a cross-vendor mammographic texture model for long-term risk. Approach: The texture model was robustly trained using two systematically designed case-control datasets. Textural features, indicative of future breast cancer, were learned by excluding samples with diagnosed/potential malignancies from training. An augmentation-based domain adaption technique, based on flavorization of mammographic views, ensured generalization across vendor-domains. The model was validated in 66,607 consecutively screened Danish women with flavorized Siemens views and 25,706 Dutch women with Hologic-processed views. Performances were evaluated for interval cancers (IC) within two years from screening and long-term cancers (LTC) from two years after screening. The texture model was combined with established risk factors to flag 10% of women with the highest risk. Results: In Danish women, the texture model achieved an area under the receiver operating characteristic (AUC) of 0.71 and 0.65 for ICs and LTCs, respectively. In Dutch women with Hologic-processed views, the AUCs were not different from AUCs in Danish women with flavorized views. The AUC for texture combined with established risk factors increased to 0.68 for LTCs. The 10% of women flagged as high-risk accounted for 25.5% of ICs and 24.8% of LTCs. Conclusions: The texture model robustly estimated long-term breast cancer risk while adapting to an unseen processed vendor-domain and identified a clinically relevant high-risk subgroup.
△ Less
Submitted 10 January, 2023; v1 submitted 27 December, 2022;
originally announced December 2022.
-
Real-time imaging of acoustic waves in bulk materials with X-ray microscopy
Authors:
Theodor S. Holstad,
Leora E. Dresselhaus-Marais,
Trygve Magnus Ræder,
Bernard Kozioziemski,
Tim van Driel,
Matthew Seaberg,
Eric Folsom,
Jon H. Eggert,
Erik Bergbäck Knudsen,
Martin Meedom Nielsen,
Hugh Simons,
Kristoffer Haldrup,
Henning Friis Poulsen
Abstract:
Materials modelling and processing require experiments to visualize and quantify how external excitations drive the evolution of deep subsurface structure and defects that determine properties. Today, 3D movies with ~100-nm resolution of crystalline structure are regularly acquired in minutes to hours using X-ray diffraction based imaging. We present an X-ray microscope that improves this time res…
▽ More
Materials modelling and processing require experiments to visualize and quantify how external excitations drive the evolution of deep subsurface structure and defects that determine properties. Today, 3D movies with ~100-nm resolution of crystalline structure are regularly acquired in minutes to hours using X-ray diffraction based imaging. We present an X-ray microscope that improves this time resolution to <100 femtoseconds, with images attainable even from a single X-ray pulse. Using this, we resolve the propagation of 18-km/s acoustic waves in mm-sized diamond crystals, and demonstrate how mechanical energy thermalizes from picosecond to microsecond timescales. Our approach unlocks a vast range of new experiments of materials phenomena with intricate structural dynamics at ultrafast timescales.
△ Less
Submitted 14 November, 2022; v1 submitted 2 November, 2022;
originally announced November 2022.
-
Acceleration and adiabatic expansion of multi-state fluorescence from a nanofocus
Authors:
Nicholas A. Güsken,
Ming Fu,
Maximilian Zapf,
Michael P. Nielsen,
Paul Dichtl,
Robert Röder,
Alex S. Clark,
Stefan A. Maier,
Carsten Ronning,
Rupert F Oulton
Abstract:
Since Purcell's seminal report 75 years ago, electromagnetic resonators have been used to control light-matter interactions to make brighter radiation sources and unleash unprecedented control over quantum states of light and matter. Indeed, optical resonators such as microcavities and plasmonic nanostructures offer excellent control but only over a limited spectral range. Strategies to tune both…
▽ More
Since Purcell's seminal report 75 years ago, electromagnetic resonators have been used to control light-matter interactions to make brighter radiation sources and unleash unprecedented control over quantum states of light and matter. Indeed, optical resonators such as microcavities and plasmonic nanostructures offer excellent control but only over a limited spectral range. Strategies to tune both emission and the resonator are often required, which preclude the possibility of enhancing multiple transitions simultaneously. In this letter, we report a more than 590-fold radiative emission enhancement across the telecommunications emission band of Erbium-ions in silica using a single non-resonant plasmonic waveguide. Our plasmonic waveguide uses a novel reverse nanofocusing approach to efficiently collect emission, making these devices brighter than all non-plasmonic control samples considered. Remarkably, the high broadband Purcell factor allows us to resolve the Stark-split electric dipole transitions, which are typically only observed under cryogenic conditions. Simultaneous Purcell enhancement of multiple quantum states is of interest for photonic quantum networks as well as on-chip data communications.
△ Less
Submitted 17 February, 2022;
originally announced February 2022.
-
Singlet Fission Photovoltaics: Progress and Promising Pathways
Authors:
Alexander J. Baldacchino,
Miles I. Collins,
Michael P. Nielsen,
Timothy W. Schmidt,
Dane R. McCamey,
Murad J. Y. Tayebjee
Abstract:
Singlet fission is a form of multiple exciton generation which occurs in organic chromophores when a high energy singlet exciton separates into two lower energy triplet excitons, each with approximately half the singlet energy. Since this process is spin-allowed it can proceed on an ultrafast timescale of less than several picoseconds, outcompeting most other loss mechanisms and reaching quantitat…
▽ More
Singlet fission is a form of multiple exciton generation which occurs in organic chromophores when a high energy singlet exciton separates into two lower energy triplet excitons, each with approximately half the singlet energy. Since this process is spin-allowed it can proceed on an ultrafast timescale of less than several picoseconds, outcompeting most other loss mechanisms and reaching quantitative yields approaching 200%.
Due to this high quantum efficiency, the singlet fission process shows promise as a means of reducing thermalisation losses in photovoltaic cells. This would potentially allow for efficiency improvements beyond the thermodynamic limit in a single junction cell. Efforts to incorporate this process into solar photovoltaic cells have spanned a wide range of device structures over the past decade. In this review we compare and categorise these attempts in order to assess the state of the field and identify the most promising avenues of future research and development.
△ Less
Submitted 2 February, 2022;
originally announced February 2022.
-
Identifying optimal photovoltaic technologies for underwater applications
Authors:
Jason A. Röhr,
Ed Sartor,
Joel N. Duenow,
Zilun Qin,
Juan Meng,
Jason Lipton,
Stephen A. Maclean,
Udo Römer,
Michael P. Nielsen,
Suling Zhao,
Jaemin Kong,
Matthew O. Reese,
Myles A. Steiner,
N. J. Ekins-Daukes,
André D. Taylor
Abstract:
Improving solar energy collection in aquatic environments would allow for superior environmental monitoring and remote sensing, but the identification of optimal photovoltaic technologies for such applications is challenging as evaluation requires either field deployment or access to large water tanks. Here, we present a simple bench-top characterization technique that does not require direct acce…
▽ More
Improving solar energy collection in aquatic environments would allow for superior environmental monitoring and remote sensing, but the identification of optimal photovoltaic technologies for such applications is challenging as evaluation requires either field deployment or access to large water tanks. Here, we present a simple bench-top characterization technique that does not require direct access to water and therefore circumvents the need for field testing during initial trials of development. Employing LEDs to simulate underwater solar spectra at various depths, we compare Si and CdTe solar cells, two commercially available technologies, with GaInP cells, a technology with a wide band gap close to ideal for underwater solar harvesting. We use this method to show that while Si cells outperform both CdTe and GaInP under terrestrial AM1.5G solar irradiance, both CdTe and GaInP outperform Si at depths > 2 m, with GaInP cells operating with underwater efficiencies exceeding 51%.
△ Less
Submitted 1 June, 2022; v1 submitted 24 October, 2021;
originally announced October 2021.
-
Synchronous Chip-to-Chip Communication with a Multi-Chip Resonator Clock Distribution Network
Authors:
Jonathan Egan,
Max Nielsen,
Joshua Strong,
Vladimir V. Talanov,
Ed Rudman,
Brainton Song,
Quentin Herr,
Anna Herr
Abstract:
Superconducting digital circuits are a promising approach to build packaged-level integrated systems with high energy-efficiency and computational density. In such systems, performance of the data link between chips mounted on a multi-chip module (MCM) is a critical driver of performance. In this work we report a synchronous data link using Reciprocal Quantum Logic (RQL) enabled by resonant clock…
▽ More
Superconducting digital circuits are a promising approach to build packaged-level integrated systems with high energy-efficiency and computational density. In such systems, performance of the data link between chips mounted on a multi-chip module (MCM) is a critical driver of performance. In this work we report a synchronous data link using Reciprocal Quantum Logic (RQL) enabled by resonant clock distribution on the chip and on the MCM carrier. The simple physical link has only four Josephson junctions and 3 fJ/bit dissipation, including a 300 W/W cooling overhead. The driver produces a signal with 35\,GHz analog bandwidth and connects to a single-ended receiver via 20 $Ω$ Nb Passive Transmission Line (PTL). To validate this link, we have designed, fabricated and tested two 32$\times$32 mm$^2$ MCMs with eight 5$\times$5 mm$^2$ chips connected serially and powered with a meander clock, and with four 10$\times$10 mm$^2$ chips powered with a 2 GHz resonant clock. The meander clock MCM validates performance of the data link components, and achieved 5.4 dB AC bias margin with no degradation relative to individual chip test. The resonator MCM validates synchronization between chips, with a measured AC bias margin up to 4.8 dB between two chips. The resonator MCM is capable of powering circuits of 4 million Josephson junctions across the four chips with a projected 10 Gbps serial data rate.
△ Less
Submitted 18 July, 2022; v1 submitted 1 September, 2021;
originally announced September 2021.
-
Optical Emission from Light-like and Particle-like Excitons in Monolayer Transition Metal Dichalcogenides
Authors:
Mikkel Ohm Sauer,
Carl Emil Mørch Nielsen,
Lars Merring-Mikkelsen,
Thomas Garm Pedersen
Abstract:
Several monolayer transition metal dichalcogenides (TMDs) are direct band gap semiconductors and potentially efficient emitters in light emitting devices. Photons are emitted when strongly bound excitons decay radiatively, and accurate models of such excitons are important for a full understanding of the emission. Importantly, photons are emitted in directions uniquely determined by the exciton ce…
▽ More
Several monolayer transition metal dichalcogenides (TMDs) are direct band gap semiconductors and potentially efficient emitters in light emitting devices. Photons are emitted when strongly bound excitons decay radiatively, and accurate models of such excitons are important for a full understanding of the emission. Importantly, photons are emitted in directions uniquely determined by the exciton center of mass momentum and with lifetimes determined by the exciton transition matrix element. The exciton band structures of two-dimensional hexagonal materials, including TMDs, are highly unusual with coexisting particle- and light-like bands. The latter is non-analytic with emission selection rules essentially opposite to the particle-like states, but has been ignored in analyses of TMD light emission so far. In the present work, we analyse the temperature and angular dependence of light emission from both exciton species and point out several important consequences of the unique exciton band structure. Within a first-principles Density-Functional-Theory+Bethe-Salpeter-Equation framework, we compute exciton band structures and optical matrix elements for the important TMDs MoS2, MoSe2, WS2, and WSe2. At low temperature, only the particle-like band is populated and our results agree with previous work. However, at slightly elevated temperatures, a significant population of the light-like band leads to modified angular emission patterns and lifetimes. Clear experimental fingerprints are predicted and explained by a simple four-state model incorporating spin-orbit as well as intervalley exchange coupling.
△ Less
Submitted 24 February, 2021;
originally announced February 2021.
-
Optoelectronic Reciprocity in Hot Carrier Solar Cells with Ideal Energy Selective Contacts
Authors:
Andreas Pusch,
Milos Dubajic,
Michael P. Nielsen,
Gavin J. Conibeer,
Stephen P. Bremner,
Nicholas J. Ekins-Daukes
Abstract:
Hot carrier solar cells promise theoretical power conversion efficiencies far beyond the single junction limit. However, practical implementations of hot carrier solar cells have lagged far behind those theoretical predictions. Reciprocity relations for electro-luminescence from conventional single junction solar cells have been extremely successful in driving their efficiency ever closer to the t…
▽ More
Hot carrier solar cells promise theoretical power conversion efficiencies far beyond the single junction limit. However, practical implementations of hot carrier solar cells have lagged far behind those theoretical predictions. Reciprocity relations for electro-luminescence from conventional single junction solar cells have been extremely successful in driving their efficiency ever closer to the theoretical limits. In this work, we discuss how the signatures of a functioning hot carrier device should manifest experimentally in electro-luminescence and dark $I-V$ characteristics. Hot carrier properties lead to deviations from the Shockley diode equation that is typical for conventional single junction solar cells. These deviations are directly linked to an increase in temperature of the carriers and therefore the temperature measured from electro-luminescence spectra. We also elucidate how the behaviour of hot carrier solar cells in the dark depends on whether Auger processes play a significant role, revealing a stark contrast between the regime of negligible Auger recombination (carrier conservation model) and dominant Auger recombination (Impact Ionization model) for hot carrier solar cells.
△ Less
Submitted 24 June, 2020; v1 submitted 24 June, 2020;
originally announced June 2020.
-
Singlet fission and tandem solar cells reduce thermal degradation and enhance lifespan
Authors:
Y. Jiang,
M. P. Nielsen,
A. J. Baldacchino,
M. A. Green,
D. R. McCamey,
M. J. Y. Tayebjee,
T. W. Schmidt,
N. J. Ekins-Daukes
Abstract:
The economic value of a photovoltaic installation depends upon both its lifetime and power conversion efficiency. Progress towards the latter includes mechanisms to circumvent the Shockley- Queisser limit, such as tandem designs and multiple exciton generation (MEG). Here we explain how both silicon tandem and MEG enhanced silicon cell architectures result in lower cell operating temperatures, inc…
▽ More
The economic value of a photovoltaic installation depends upon both its lifetime and power conversion efficiency. Progress towards the latter includes mechanisms to circumvent the Shockley- Queisser limit, such as tandem designs and multiple exciton generation (MEG). Here we explain how both silicon tandem and MEG enhanced silicon cell architectures result in lower cell operating temperatures, increasing the device lifetime compared to standard c-Si cells. Also demonstrated are further advantages from MEG enhanced silicon cells: (i) the device architecture can completely circumvent the need for current-matching; and (ii) upon degradation, tetracene, a candidate singlet fission (a form of MEG) material, is transparent to the solar spectrum. The combination of (i) and (ii) mean that the primary silicon device will continue to operate with reasonable efficiency even if the singlet fission layer degrades. The lifespan advantages of singlet fission enhanced silicon cells, from a module perspective, are compared favorably alongside the highly regarded perovskite/silicon tandem and conventional c-Si modules.
△ Less
Submitted 14 April, 2020; v1 submitted 11 March, 2020;
originally announced March 2020.
-
Origin of vibrational wavepacket dynamics in Fe carbene photosensitizer determined with femtosecond X-ray emission and scattering
Authors:
Kristjan Kunnus,
Morgane Vacher,
Tobias C. B. Harlang,
Kasper S. Kjær,
Kristoffer Haldrup,
Elisa Biasin,
Tim B. van Driel,
Mátyás Pápa,
Pavel Chabera,
Yizhu Liu,
Hideyuki Tatsuno,
Cornelia Timm,
Erik Källman,
Mickaël Delcey,
Robert W. Hartsock,
Marco E. Reinhard,
Sergey Koroidov,
Mads G. Laursen,
Frederik B. Hansen,
Peter Vester,
Morten Christensen,
Lise Sandberg,
Zoltán Németh,
Dorottya Sárosiné Szemes,
Éva Bajnóczi
, et al. (16 additional authors not shown)
Abstract:
Disentangling the dynamics of electrons and nuclei during nonadiabatic molecular transformations remains a considerable experimental challenge. Here we have investigated photoinduced electron transfer dynamics following a metal-to-ligand charge-transfer (MLCT) excitation of the [Fe(bmip)2]2+ photosensitizer, where bmip = 2,6-bis(3-methyl-imidazole-1- ylidine)-pyridine, with simultaneous femtosecon…
▽ More
Disentangling the dynamics of electrons and nuclei during nonadiabatic molecular transformations remains a considerable experimental challenge. Here we have investigated photoinduced electron transfer dynamics following a metal-to-ligand charge-transfer (MLCT) excitation of the [Fe(bmip)2]2+ photosensitizer, where bmip = 2,6-bis(3-methyl-imidazole-1- ylidine)-pyridine, with simultaneous femtosecond-resolution Fe Kα and K\b{eta} X-ray Emission Spectroscopy (XES) and Wide Angle X-ray Scattering (WAXS). This measurement clearly shows temporal oscillations in the XES and WAXS difference signals with the same 278 fs period oscillation. The oscillatory signal originates from an Fe-ligand stretching mode vibrational wavepacket on a triplet metal-centered (3MC) excited state surface. The vibrational wavepacket is created by 40% of the excited population that undergoes electron transfer from the non-equilibrium MLCT excited state to the 3MC excited state with a 110 fs time constant, while the other 60% relaxes to a 3MLCT excited state in parallel. The sensitivity of the Kα XES spectrum to molecular structure results from core-level vibronic coupling, due to a 0.7% average Fe-ligand bond length difference in the lowest energy geometry of the 1s and 2p core-ionized states. These results highlight the importance of vibronic effects in time-resolved XES experiments and demonstrate the role of metal-centered excited states in the electronic excited state relaxation dynamics of an Fe carbene photosensitizer.
△ Less
Submitted 29 October, 2019;
originally announced October 2019.
-
The detection of acute kidney injury with hyperpolarized 13C Urea and multi-exponential fitting
Authors:
James T Grist,
Christian Østergaard Mariager,
Haiyun Qi,
Per Mose Nielsen,
Christoffer Laustsen
Abstract:
Purpose: To assess the utility of Laplacian fitting to describe the differences in hyperpolarized 13C urea T2 relaxation in ischemic and healthy rodent kidneys. Theory and Methods: Six rats with unilateral renal ischemia were investigated. 13C urea T2 map** was undertaken with a radial fast spin echo method, with subsequent post-processing performed with regularised Laplacian fitting. Results: S…
▽ More
Purpose: To assess the utility of Laplacian fitting to describe the differences in hyperpolarized 13C urea T2 relaxation in ischemic and healthy rodent kidneys. Theory and Methods: Six rats with unilateral renal ischemia were investigated. 13C urea T2 map** was undertaken with a radial fast spin echo method, with subsequent post-processing performed with regularised Laplacian fitting. Results: Simulations showed that Laplacian fitting was stable down to a signal to noise ratio of 20. In vivo results showed a significant increase in the mono- and decrease in bi-exponential pools in IRI kidneys, in comparison to healthy (14+-10% vs 4+-2%, 85+-10% vs 95+-3%, p<0.05). Conclusion: We demonstrate, for the first time, the differences in multi-exponential behaviour of 13C,15N2-urea between the healthy and ischemic rodent kidney. The distribution of relaxation pools were found to be both visually and numerically significantly different. The ability to improve the information level in hyperpolarized MR, by utilizing the relaxation contrast mechanisms is an appealing option, that can easily be adopted in large animals and even in clinical studies in the near future.
△ Less
Submitted 24 October, 2019;
originally announced October 2019.
-
Hybrid plasmonic waveguide coupling of photons from a single molecule
Authors:
Samuele Grandi,
Michael P. Nielsen,
Javier Cambiasso,
Sebastien Boissier,
Kyle D. Major,
Christopher Reardon,
Thomas F. Krauss,
Rupert F. Oulton,
E. A. Hinds,
Alex S. Clark
Abstract:
We demonstrate the emission of photons from a single molecule into a hybrid gap plasmon waveguide (HGPW). Crystals of anthracene, doped with dibenzoterrylene (DBT), are grown on top of the waveguides. We investigate a single DBT molecule coupled to the plasmonic region of one of the guides, and determine its in-plane orientation, excited state lifetime and saturation intensity. The molecule emits…
▽ More
We demonstrate the emission of photons from a single molecule into a hybrid gap plasmon waveguide (HGPW). Crystals of anthracene, doped with dibenzoterrylene (DBT), are grown on top of the waveguides. We investigate a single DBT molecule coupled to the plasmonic region of one of the guides, and determine its in-plane orientation, excited state lifetime and saturation intensity. The molecule emits light into the guide, which is remotely out-coupled by a grating. The second-order auto-correlation and cross-correlation functions show that the emitter is a single molecule and that the light emerging from the grating comes from that molecule. The coupling efficiency is found to be $β_{WG}=11.6(1.5)\%$. This type of structure is promising for building new functionality into quantum-photonic circuits, where localised regions of strong emitter-guide coupling can be interconnected by low-loss dielectric guides.
△ Less
Submitted 15 May, 2019;
originally announced May 2019.
-
Ultrafast Structural Dynamics of Photo-Reactions Revealed by Model-Independent X-ray Cross-Correlation Analysis
Authors:
Peter Vester,
Ivan A. Zaluzhnyy,
Ruslan P. Kurta,
Klaus B. Moeller,
Elisa Biasin,
Kristoffer Haldrup,
Martin Meedom Nielsen,
Ivan A. Vartanyants
Abstract:
We applied angular X-ray Cross-Correlation analysis (XCCA) to scattering images from a femtosecond resolution LCLS X-ray free-electron laser (XFEL) pump-probe experiment with solvated PtPOP ([Pt$_2$(P$_2$O$_5$H$_2$)$_4$]$^{4-}$) metal complex molecules. The molecules were pumped with linear polarized laser pulses creating an excited state population with a preferred orientational (alignment) direc…
▽ More
We applied angular X-ray Cross-Correlation analysis (XCCA) to scattering images from a femtosecond resolution LCLS X-ray free-electron laser (XFEL) pump-probe experiment with solvated PtPOP ([Pt$_2$(P$_2$O$_5$H$_2$)$_4$]$^{4-}$) metal complex molecules. The molecules were pumped with linear polarized laser pulses creating an excited state population with a preferred orientational (alignment) direction. Two time scales of $1.9\pm1.5$ ps and $46\pm10$ ps were revealed by model-independent XCCA, associated with an internal structural changes and rotational dephasing, respectively. Our studies illustrate the potential of XCCA to reveal hidden structural information in a model independent analysis of time evolution of solvated metal complex molecules.
△ Less
Submitted 19 November, 2018;
originally announced November 2018.
-
Anisotropy enhanced X-ray scattering from solvated transition metal complexes
Authors:
Elisa Biasin,
Tim B. van Driel,
Gianluca Levi,
Mads G. Laursen,
Asmus O. Dohn,
Asbjørn Molkte,
Peter Vester,
Frederik B. K. Hansen,
Kasper S. Kjaer,
Tobias Harlang,
Robert Hartsock,
Morten Christensen,
Kelly J. Gaffney,
Niels E. Henriksen,
Klaus B. Møller,
Kristoffer Haldrup,
Martin M. Nielsen
Abstract:
Time-resolved X-ray scattering patterns from photoexcited molecules in solution are in many cases anisotropic at the ultrafast time scales accessible at X-ray Free Electron Lasers (XFELs). This anisotropy arises from the interaction of a linearly polarized UV-vis pump laser pulse with the sample, which induces anisotropic structural changes that can be captured by femtosecond X-ray pulses. In this…
▽ More
Time-resolved X-ray scattering patterns from photoexcited molecules in solution are in many cases anisotropic at the ultrafast time scales accessible at X-ray Free Electron Lasers (XFELs). This anisotropy arises from the interaction of a linearly polarized UV-vis pump laser pulse with the sample, which induces anisotropic structural changes that can be captured by femtosecond X-ray pulses. In this work we describe a method for quantitative analysis of the anisotropic scattering signal arising from an ensemble of molecules and we demonstrate how its use can enhance the structural sensitivity of the time-resolved X-ray scattering experiment. We apply this method on time-resolved X-ray scattering patterns measured upon photoexcitation of a solvated di-platinum complex at an XFEL and explore the key parameters involved. We show that a combined analysis of the anisotropic and isotropic difference scattering signals in this experiment allows a more precise determination of the main photoinduced structural change in the solute, i.e. the change in Pt-Pt bond length, and yields more information on the excitation channels than the analysis of the isotropic scattering only. Finally, we discuss how the anisotropic transient response of the solvent can enable the determination of key experimental parameters such as the Instrument Response Function.
△ Less
Submitted 19 January, 2018;
originally announced January 2018.
-
Efficient four-wave mixing at the nanofocus of integrated organic gap plasmon waveguides on silicon
Authors:
Michael P. Nielsen,
Xingyuan Shi,
Paul Dichtl,
Stefan A. Maier,
Rupert F. Oulton
Abstract:
Nonlinear optics, especially frequency mixing, underpins modern optical technology and scientific exploration in quantum optics, materials and life sciences, and optical communications. Since nonlinear effects are weak, efficient frequency mixing must accumulate over large interaction lengths restricting the integration of nonlinear photonics with electronics and establishing limitations on mixing…
▽ More
Nonlinear optics, especially frequency mixing, underpins modern optical technology and scientific exploration in quantum optics, materials and life sciences, and optical communications. Since nonlinear effects are weak, efficient frequency mixing must accumulate over large interaction lengths restricting the integration of nonlinear photonics with electronics and establishing limitations on mixing processes due to the requirement of phase matching. In this work we report efficient four-wave mixing over micron-scale interaction lengths at telecoms wavelengths. We use an integrated plasmonic gap waveguide on silicon that strongly confines light within a nonlinear organic polymer in the gap. Our approach is so effective because the gap waveguide intensifies light by efficiently nanofocusing it to a mode cross-section of a few tens of nanometres, generating a nonlinear response so strong that efficient four-wave mixing accumulates in just a micron. This is significant as our technique opens up nonlinear optics to a regime where phase matching and dispersion considerations are relaxed, giving rise to the possibility of compact, broadband, and efficient frequency mixing on a platform that can be integrated with silicon photonics.
△ Less
Submitted 15 June, 2017;
originally announced June 2017.
-
Quantitative in-situ monitoring of germinating barley seeds using X-ray dark-field radiography
Authors:
Mikkel Schou Nielsen,
Kasper Borg Damkjær,
Robert Feidenhans'l
Abstract:
During production of malt from barley seeds, cell walls and starch granules in the endosperm are degraded. Although this modification process is important for malt quality, the modification patterns of individual barley seeds have yet to be reported. The use of destructive microscopy methods have previously limited the investigations to ensemble averages.
X-ray dark-field radiography is a recent…
▽ More
During production of malt from barley seeds, cell walls and starch granules in the endosperm are degraded. Although this modification process is important for malt quality, the modification patterns of individual barley seeds have yet to be reported. The use of destructive microscopy methods have previously limited the investigations to ensemble averages.
X-ray dark-field radiography is a recent non-destructive imaging method which is sensitive to microstructural variations. In this study, the method was applied for quantitative in-situ monitoring of barley seeds. Microstructural changes relating to water uptake and modification were monitored over a 43-55 h period.
Sub-resolution stress cracks as well as a dark-field signal believed to originate from starch granules were detected. The evolution of the dark-field signal followed the known modification pattern in barley seeds. Through image analysis, quantitative parameters describing the movement of the front of the observed pattern were obtained.
Based on these findings, X-ray dark-field radiography presents a possible novel approach to monitor the modification of germinating barley seeds.
△ Less
Submitted 29 November, 2016;
originally announced January 2017.
-
Plasmonic metagratings for simultaneous determination of Stokes parameters
Authors:
Anders Pors,
Michael G. Nielsen,
Sergey I. Bozhevolnyi
Abstract:
Measuring light's state of polarization is an inherently difficult problem, since the phase information between orthogonal polarization states is typically lost in the detection process. In this work, we bring to the fore the equivalence between normalized Stokes parameters and diffraction contrasts in appropriately designed phase-gradient birefringent metasurfaces and introduce a concept of all-p…
▽ More
Measuring light's state of polarization is an inherently difficult problem, since the phase information between orthogonal polarization states is typically lost in the detection process. In this work, we bring to the fore the equivalence between normalized Stokes parameters and diffraction contrasts in appropriately designed phase-gradient birefringent metasurfaces and introduce a concept of all-polarization birefringent metagratings. The metagrating, which consists of three interweaved metasurfaces, allows one to easily analyze an arbitrary state of light polarization by conducting simultaneous (i.e., parallel) measurements of the correspondent diffraction intensities that reveal immediately the Stokes parameters of the polarization state under examination. Based on plasmonic metasurfaces operating in reflection at the wavelength of 800 nm, we design and realize phase-gradient birefringent metasurfaces and the correspondent metagrating, while experimental characterization of the fabricated components convincingly demonstrates the expected functionalities. We foresee the use of the metagrating in compact polarimetric setups at any frequency regime of interest.
△ Less
Submitted 15 September, 2016;
originally announced September 2016.
-
Analog computing using reflective plasmonic metasurfaces
Authors:
Anders Pors,
Michael G. Nielsen,
Sergey I. Bozhevolnyi
Abstract:
Motivated by the recent renewed interest in compact analog computing using light and metasurfaces (Silva, A. et al., Science 2014, 343, 160-163), we suggest a practical approach to its realization that involves reflective metasurfaces consisting of arrayed gold nanobricks atop a subwavelength-thin dielectric spacer and optically-thick gold film, a configuration that supports gap-surface plasmon re…
▽ More
Motivated by the recent renewed interest in compact analog computing using light and metasurfaces (Silva, A. et al., Science 2014, 343, 160-163), we suggest a practical approach to its realization that involves reflective metasurfaces consisting of arrayed gold nanobricks atop a subwavelength-thin dielectric spacer and optically-thick gold film, a configuration that supports gap-surface plasmon resonances. Using well established numerical routines, we demonstrate that these metasurfaces enable independent control of the light phase and amplitude, and design differentiator and integrator metasurfaces featuring realistic system parameters. Proof-of-principle experiments are reported along with the successful realization of a high-quality poor-man's integrator metasurface operating at the wavelength of 800 nm.
△ Less
Submitted 15 September, 2016;
originally announced September 2016.
-
Femtosecond X-Ray Scattering Study of Ultrafast Photoinduced Structural Dynamics in Solvated [Co(terpy)2]2+
Authors:
Elisa Biasin,
Tim Brandt van Driel,
Kasper S. Kjær,
Asmus O. Dohn,
Morten Christensen,
Tobias Harlang,
Pavel Chabera,
Yizhu Liu,
Jens Uhlig,
Mátyás Pápai,
Zoltán Németh,
Robert Hartsock,
Winnie Liang,
Jianxin Zhang,
Roberto Alonso-Mori,
Matthieu Chollet,
James M. Glownia,
Silke Nelson,
Dimosthenis Sokaras,
Tadesse A. Assefa,
Alexander Britz,
Andreas Galler,
Wojciech Gawelda,
Christian Bressler,
Kelly J. Gaffney
, et al. (8 additional authors not shown)
Abstract:
We study the structural dynamics of photoexcited [Co(terpy)2]2+ in an aqueous solution with ultrafast x-ray diffuse scattering experiments conducted at the Linac Coherent Light Source. Through direct comparisons with density functional theory calculations, our analysis shows that the photoexcitation event leads to elongation of the Co-N bonds, followed by coherent Co-N bond length oscillations ari…
▽ More
We study the structural dynamics of photoexcited [Co(terpy)2]2+ in an aqueous solution with ultrafast x-ray diffuse scattering experiments conducted at the Linac Coherent Light Source. Through direct comparisons with density functional theory calculations, our analysis shows that the photoexcitation event leads to elongation of the Co-N bonds, followed by coherent Co-N bond length oscillations arising from the impulsive excitation of a vibrational mode dominated by the symmetrical stretch of all six Co-N bonds. This mode has a period of 0.33 ps and decays on a subpicosecond time scale. We find that the equilibrium bond-elongated structure of the high spin state is established on a single-picosecond time scale and that this state has a lifetime of ~ 7 ps.
△ Less
Submitted 6 July, 2016;
originally announced July 2016.
-
Silicon Photonics WDM Transceiver with SOA and Semiconductor Mode-Locked Laser
Authors:
Alvaro Moscoso-Mártir,
Juliana Müller,
Johannes Hauck,
Nicolas Chimot,
Rony Setter,
Avner Badihi,
Daniel E. Rasmussen,
Alexandre Garreau,
Mads Nielsen,
Elmira Islamova,
Sebastián Romero-García,
Bin Shen,
Anna Sandomirsky,
Sylvie Rockman,
Chao Li,
Saeed Sharif Azadeh,
Guo-Qiang Lo,
Elad Mentovich,
Florian Merget,
François Lelarge,
Jeremy Witzens
Abstract:
We demonstrate a complete Silicon Photonics WDM link relying on a single section semiconductor mode-locked laser and a single SOA to support up to 12 multiplexed channels with a bit error rate of 1e-12 at serial data rates of 14 Gbps without channel pre-emphasis, equalization or forward error correction. Individual channels reach error free operation at 25 Gbps and multi-channel operation at 25 Gb…
▽ More
We demonstrate a complete Silicon Photonics WDM link relying on a single section semiconductor mode-locked laser and a single SOA to support up to 12 multiplexed channels with a bit error rate of 1e-12 at serial data rates of 14 Gbps without channel pre-emphasis, equalization or forward error correction. Individual channels reach error free operation at 25 Gbps and multi-channel operation at 25 Gbps is shown to be compatible with standard 7% overhead hard decision forward error correction. Silicon Photonics transmitter and receiver chips are hybridly integrated with driver and receiver electronics. A detailed link model is derived and verified. Particular emphasis is placed on accurate system level modeling of laser RIN, SOA amplified spontaneous emission noise and receiver noise. The impact of the electrical receiver bandwidth and non-Gaussian statistics on level dependent amplified spontaneous emission noise are investigated in detail. The channel count scalability as limited by SOA saturation is further analyzed taking cross gain modulation and four wave mixing into account. While semiconductor mode-locked lasers have been identified as a potential light source for low cost Datacom WDM transceivers for some time, this is, to the best of our knowledge, the first comprehensive investigation of the overall link budget in a Silicon Photonics implementation showing this technology to be a credible contender for low latency datacenter interconnects.
△ Less
Submitted 27 May, 2016;
originally announced May 2016.
-
Ptychographic X-ray computed tomography of extended colloidal networks in food emulsions
Authors:
M. S. Nielsen,
M. B. Munk,
A. Diaz,
E. B. L. Pedersen,
M. Holler,
S. Bruns,
J. Risbo,
K. Mortensen,
R. Feidenhans'l
Abstract:
As a main structural level in colloidal food materials, extended colloidal networks are important for texture and rheology. By obtaining the 3D microstructure of the network, macroscopic mechanical properties of the material can be inferred. However, this approach is hampered by the lack of suitable non-destructive 3D imaging techniques with submicron resolution.
We present results of quantitati…
▽ More
As a main structural level in colloidal food materials, extended colloidal networks are important for texture and rheology. By obtaining the 3D microstructure of the network, macroscopic mechanical properties of the material can be inferred. However, this approach is hampered by the lack of suitable non-destructive 3D imaging techniques with submicron resolution.
We present results of quantitative ptychographic X-ray computed tomography applied to a palm kernel oil based oil-in-water emulsion. The measurements were carried out at ambient pressure and temperature. The 3D structure of the extended colloidal network of fat globules was obtained with a resolution of around 300 nm. Through image analysis of the network structure, the fat globule size distribution was computed and compared to previous findings. In further support, the reconstructed electron density values were within 4% of reference values.
△ Less
Submitted 11 February, 2016;
originally announced February 2016.
-
Watching coherent molecular structural dynamics during photoreaction: beyond kinetic description
Authors:
Henrik T. Lemke,
Kasper Skov Kjær,
Robert Hartsock,
Tim Brandt van Driel,
Matthieu Chollet,
J. M. Glownia,
Sanghoon Song,
Diling Zhu,
Elisabetta Pace,
Martin M Nielsen,
Maurizio Benfatto,
Kelly J. Gaffney,
Eric Collet,
Marco Cammarata
Abstract:
A deep understanding of molecular photo-transformations is challenging because of the complex interaction between the configurations of electrons and nuclei. An initial optical excitation dissipates energy into electronic and structural degrees of freedom, often in less than one trillionth (10^-12) of a second. Molecular dynamics induced by photoexcitation have been very successfully studied with…
▽ More
A deep understanding of molecular photo-transformations is challenging because of the complex interaction between the configurations of electrons and nuclei. An initial optical excitation dissipates energy into electronic and structural degrees of freedom, often in less than one trillionth (10^-12) of a second. Molecular dynamics induced by photoexcitation have been very successfully studied with femtosecond optical spectroscopies, but electronic and nuclear dynamics are often very difficult to disentangle. X-ray based spectroscopies can reduce the ambiguity between theoretical models and experimental data, but it is only with the recent development of bright ultrafast X-ray sources, that key information during transient molecular processes can be obtained on their intrinsic timescale. In this letter, Free Electron Laser (FEL) radiation is used to measure ultrafast changes in the X-ray Absorption Near Edge Structure (XANES) during the prototypical photoreaction of a spin crossover compound. We reveal its transformation from the ligand-located electronic photoexcitation to the structural trap** of the high spin state. The results require a description beyond a kinetic model and provide a direct observation of a dynamic breathing of the main structural change. The coherent structural oscillations (period of ~265 fs) in the photoproduct potential lose synchrony within ~330 fs, whereas incoherent motions reveal the energy redistribution and vibrational cooling within ~1.6 ps. We foresee that ultrafast X-ray spectroscopies will provide invaluable insight to understand the complex physics of fundamental light induced phenomena, which are of prime interest in a multitude of chemical, physical and biological processes.
△ Less
Submitted 12 November, 2015; v1 submitted 4 November, 2015;
originally announced November 2015.
-
An integrated source of broadband quadrature squeezed light
Authors:
Ulrich B. Hoff,
Bo M. Nielsen,
Ulrik L. Andersen
Abstract:
An integrated silicon nitride resonator is proposed as an ultra-compact source of bright single-mode quadrature squeezed light at 850 nm. Optical properties of the device are investigated and tailored through numerical simulations, with particular attention paid to loss associated with interfacing the device. An asymmetric double layer stack waveguide geometry with inverse vertical tapers is propo…
▽ More
An integrated silicon nitride resonator is proposed as an ultra-compact source of bright single-mode quadrature squeezed light at 850 nm. Optical properties of the device are investigated and tailored through numerical simulations, with particular attention paid to loss associated with interfacing the device. An asymmetric double layer stack waveguide geometry with inverse vertical tapers is proposed for efficient and robust fibre-chip coupling, yielding a simulated total loss of -0.75 dB/facet. We assess the feasibility of the device through a full quantum noise analysis and derive the output squeezing spectrum for intra-cavity pump self-phase modulation. Subject to standard material loss and detection efficiencies, we find that the device holds promises for generating substantial quantum noise squeezing over a bandwidth exceeding 1 GHz. In the low-propagation loss regime, approximately -7 dB squeezing is predicted for a pump power of only 50 mW.
△ Less
Submitted 4 April, 2015;
originally announced April 2015.
-
Efficient fourth order symplectic integrators for near-harmonic separable Hamiltonian systems
Authors:
Kristian Mads Egeris Nielsen
Abstract:
Efficient fourth order symplectic integrators are proposed for numerical integration of separable Hamiltonian systems H(p,q)=T(p)+V(q). Symmetric splitting coefficients with five to nine stages are obtained by higher order decomposition of the simple harmonic oscillator. The performance of the methods is evaluated for various Hamiltonian systems: Integration errors are compared to those of acclaim…
▽ More
Efficient fourth order symplectic integrators are proposed for numerical integration of separable Hamiltonian systems H(p,q)=T(p)+V(q). Symmetric splitting coefficients with five to nine stages are obtained by higher order decomposition of the simple harmonic oscillator. The performance of the methods is evaluated for various Hamiltonian systems: Integration errors are compared to those of acclaimed integrators composed by S. Blanes et al. (2013), W. Kahan et al. (1999) and H. Yoshida (1990). Numerical tests indicate that the integrators obtained in this paper perform significantly better than previous integrators for common Hamiltonian systems.
△ Less
Submitted 9 February, 2015; v1 submitted 18 January, 2015;
originally announced January 2015.
-
Thermochemistry of Alane Complexes for Hydrogen Storage: A Theoretical and Experimental Comparison
Authors:
Bryan M. Wong,
David Lacina,
Ida M. B. Nielsen,
Jason Graetz,
Mark D. Allendorf
Abstract:
Knowledge of the relative stabilities of alane (AlH3) complexes with electron donors is essential for identifying hydrogen storage materials for vehicular applications that can be regenerated by off-board methods; however, almost no thermodynamic data are available to make this assessment. To fill this gap, we employed the G4(MP2) method to determine heats of formation, entropies, and Gibbs free e…
▽ More
Knowledge of the relative stabilities of alane (AlH3) complexes with electron donors is essential for identifying hydrogen storage materials for vehicular applications that can be regenerated by off-board methods; however, almost no thermodynamic data are available to make this assessment. To fill this gap, we employed the G4(MP2) method to determine heats of formation, entropies, and Gibbs free energies of formation for thirty-eight alane complexes with NH3-nRn (R = Me, Et; n = 0-3), pyridine, pyrazine, triethylenediamine (TEDA), quinuclidine, OH2-nRn (R = Me, Et; n = 0-2), dioxane, and tetrahydrofuran (THF). Monomer, bis, and selected dimer complex geometries were considered. Using these data, we computed the thermodynamics of the key formation and dehydrogenation reactions that would occur during hydrogen delivery and alane regeneration, from which trends in complex stability were identified. These predictions were tested by synthesizing six amine-alane complexes involving trimethylamine, triethylamine, dimethylethylamine, TEDA, quinuclidine, and hexamine, and obtaining upper limits of delta G for their formation from metallic aluminum. Combining these computational and experimental results, we establish a criterion for complex stability relevant to hydrogen storage that can be used to assess potential ligands prior to attempting synthesis of the alane complex. Based on this, we conclude that only a subset of the tertiary amine complexes considered and none of the ether complexes can be successfully formed by direct reaction with aluminum and regenerated in an alane-based hydrogen storage system.
△ Less
Submitted 18 April, 2011;
originally announced April 2011.
-
Cobalt-Porphyrin Catalyzed Electrochemical Reduction of Carbon Dioxide in Water II: Mechanism from First Principles
Authors:
Kevin Leung,
Ida M. B. Nielsen,
Na Sai,
Craig J. Medforth,
J. A. Shelnutt
Abstract:
We apply first principles computational techniques to analyze the two-electron, multi-step, electrochemical reduction of CO2 to CO in water using cobalt porphyrin as a catalyst. Density Functional Theory calculations with hybrid functionals and dielectric continuum solvation are used to determine the steps at which electrons are added. This information is corroborated with ab initio molecular dyna…
▽ More
We apply first principles computational techniques to analyze the two-electron, multi-step, electrochemical reduction of CO2 to CO in water using cobalt porphyrin as a catalyst. Density Functional Theory calculations with hybrid functionals and dielectric continuum solvation are used to determine the steps at which electrons are added. This information is corroborated with ab initio molecular dynamics simulations in an explicit aqueous environment which reveal the critical role of water in stabilizing a key intermediate formed by CO2 bound to cobalt. Using potential of mean force calculations, the intermediate is found to spontaneously accept a proton to form a carboxylate acid group at pH<9.0, and the subsequent cleavage of a C-OH bond to form CO is exothermic and associated with a small free energy barrier. These predictions suggest that the proposed reaction mechanism is viable if electron transfer to the catalyst is sufficiently fast. The variation in cobalt ion charge and spin states during bond breaking, DFT+U treatment of cobalt 3d orbitals, and the need for computing electrochemical potentials are emphasized.
△ Less
Submitted 29 December, 2010;
originally announced January 2011.
-
Optoelectronic cooling of mechanical modes in a semiconductor nanomembrane
Authors:
K. Usami,
A. Naesby,
T. Bagci,
B. Melholt Nielsen,
J. Liu,
S. Stobbe,
P. Lodahl,
E. S. Polzik
Abstract:
Optical cavity cooling of mechanical resonators has recently become a research frontier. The cooling has been realized with a metal-coated silicon microlever via photo-thermal force and subsequently with dielectric objects via radiation pressure. Here we report cavity cooling with a crystalline semiconductor membrane via a new mechanism, in which the cooling force arises from the interaction betwe…
▽ More
Optical cavity cooling of mechanical resonators has recently become a research frontier. The cooling has been realized with a metal-coated silicon microlever via photo-thermal force and subsequently with dielectric objects via radiation pressure. Here we report cavity cooling with a crystalline semiconductor membrane via a new mechanism, in which the cooling force arises from the interaction between the photo-induced electron-hole pairs and the mechanical modes through the deformation potential coupling. The optoelectronic mechanism is so efficient as to cool a mode down to 4 K from room temperature with just 50 uW of light and a cavity with a finesse of 10 consisting of a standard mirror and the sub-wavelength-thick semiconductor membrane itself. The laser-cooled narrow-band phonon bath realized with semiconductor mechanical resonators may open up a new avenue for photonics and spintronics devices.
△ Less
Submitted 22 November, 2010; v1 submitted 17 November, 2010;
originally announced November 2010.
-
Predicting macrobending loss for large-mode area photonic crystal fibers
Authors:
M. D. Nielsen,
N. A. Mortensen,
M. Albertsen,
J. R. Folkenberg,
A. Bjarklev,
D. Bonacinni
Abstract:
We report on an easy-to-evaluate expression for the prediction of the bend-loss for a large mode area photonic crystal fiber (PCF) with a triangular air-hole lattice. The expression is based on a recently proposed formulation of the V-parameter for a PCF and contains no free parameters. The validity of the expression is verified experimentally for varying fiber parameters as well as bend radius.…
▽ More
We report on an easy-to-evaluate expression for the prediction of the bend-loss for a large mode area photonic crystal fiber (PCF) with a triangular air-hole lattice. The expression is based on a recently proposed formulation of the V-parameter for a PCF and contains no free parameters. The validity of the expression is verified experimentally for varying fiber parameters as well as bend radius. The typical deviation between the position of the measured and the predicted bend loss edge is within measurement uncertainty.
△ Less
Submitted 10 April, 2004;
originally announced April 2004.
-
Low-loss photonic crystal fibers for transmission systems and their dispersion properties
Authors:
M. D. Nielsen,
C. Jacobsen,
N. A. Mortensen,
J. R. Folkenberg,
H. R. Simonsen
Abstract:
We report on a single-mode photonic crystal fiber with attenuation and effective area at 1550 nm of 0.48 dB/km and 130 square-micron, respectively. This is, to our knowledge, the lowest loss reported for a PCF not made from VAD prepared silica and at the same time the largest effective area for a low-loss (< 1 dB/km) PCF. We briefly discuss the future applications of PCFs for data transmission a…
▽ More
We report on a single-mode photonic crystal fiber with attenuation and effective area at 1550 nm of 0.48 dB/km and 130 square-micron, respectively. This is, to our knowledge, the lowest loss reported for a PCF not made from VAD prepared silica and at the same time the largest effective area for a low-loss (< 1 dB/km) PCF. We briefly discuss the future applications of PCFs for data transmission and show for the first time, both numerically and experimentally, how the group velocity dispersion is related to the mode field diameter
△ Less
Submitted 26 March, 2004;
originally announced March 2004.
-
Polarization maintaining large mode area photonic crystal fiber
Authors:
J. R. Folkenberg,
M. D. Nielsen,
N. A. Mortensen,
C. Jakobsen,
H. R. Simonsen
Abstract:
We report on a polarization maintaining large mode area photonic crystal fiber. Unlike, previous work on polarization maintaining photonic crystal fibers, birefringence is introduced using stress applying parts. This has allowed us to realize fibers, which are both single mode at any wavelength and have a practically constant birefringence for any wavelength. The fibers presented in this work ha…
▽ More
We report on a polarization maintaining large mode area photonic crystal fiber. Unlike, previous work on polarization maintaining photonic crystal fibers, birefringence is introduced using stress applying parts. This has allowed us to realize fibers, which are both single mode at any wavelength and have a practically constant birefringence for any wavelength. The fibers presented in this work have mode field diameters from about 4 to 6.5 micron, and exhibit a typical birefringence of 1.5e-4.
△ Less
Submitted 5 March, 2004;
originally announced March 2004.
-
Photonic crystal fiber with a hybrid honeycomb cladding
Authors:
N. A. Mortensen,
M. D. Nielsen,
J. R. Folkenberg,
C. Jakobsen,
H. R. Simonsen
Abstract:
We consider an air-silica honeycomb lattice and demonstrate a new approach to the formation of a core defect. Typically, a high or low-index core is formed by adding a high-index region or an additional air-hole (or other low-index material) to the lattice, but here we discuss how a core defect can be formed by manipulating the cladding region rather than the core region itself. Germanium-do**…
▽ More
We consider an air-silica honeycomb lattice and demonstrate a new approach to the formation of a core defect. Typically, a high or low-index core is formed by adding a high-index region or an additional air-hole (or other low-index material) to the lattice, but here we discuss how a core defect can be formed by manipulating the cladding region rather than the core region itself. Germanium-do** of the honeycomb lattice has recently been suggested for the formation of a photonic band-gap guiding silica-core and here we experimentally demonstrate how an index-guiding silica-core can be formed by fluorine-do** of the honeycomb lattice.
△ Less
Submitted 29 January, 2004;
originally announced January 2004.
-
Bandwidth comparison of photonic crystal fibers and conventional single-mode fibers
Authors:
M. D. Nielsen,
J. R. Folkenberg,
N. A. Mortensen,
A. Bjarklev
Abstract:
We experimentally compare the optical bandwidth of a conventional single-mode fiber (SMF) with 3 different photonic crystal fibers (PCF) all optimized for visible applications. The spectral attenuation, single-turn bend loss, and mode-field diameters (MFD) are measured and the PCF is found to have a significantly larger bandwidth than the SMF for an identical MFD. It is shown how this advantage…
▽ More
We experimentally compare the optical bandwidth of a conventional single-mode fiber (SMF) with 3 different photonic crystal fibers (PCF) all optimized for visible applications. The spectral attenuation, single-turn bend loss, and mode-field diameters (MFD) are measured and the PCF is found to have a significantly larger bandwidth than the SMF for an identical MFD. It is shown how this advantage can be utilized for realizing a larger MFD for the PCF while maintaining a bending resistant fiber.
△ Less
Submitted 27 January, 2004;
originally announced January 2004.
-
Small-core photonic crystal fibers with weakly disordered air-hole claddings
Authors:
N. A. Mortensen,
M. D. Nielsen,
J. R. Folkenberg,
K. P. Hansen,
J. Laegsgaard
Abstract:
Motivated by recent experimental work by Folkenberg et al. we consider the effect of weak disorder in the air-hole lattice of small-core photonic crystal fibers. We find that the broken symmetry leads to higher-order modes which have generic intensity distributions resembling those found in standard fibers with elliptical cores. This explains why recently reported experimental higher-order mode…
▽ More
Motivated by recent experimental work by Folkenberg et al. we consider the effect of weak disorder in the air-hole lattice of small-core photonic crystal fibers. We find that the broken symmetry leads to higher-order modes which have generic intensity distributions resembling those found in standard fibers with elliptical cores. This explains why recently reported experimental higher-order mode profiles appear very different from those calculated numerically for ideal photonic crystal fibers with inversion and six-fold rotational symmetry. The splitting of the four higher-order modes into two groups fully correlates with the observation that these modes have different cut-offs.
△ Less
Submitted 21 November, 2003;
originally announced November 2003.
-
Single-mode photonic crystal fiber with an effective area of 600 square-micron and low bending loss
Authors:
Martin Dybendal Nielsen,
Jabob Riis Folkenberg,
Niels Asger Mortensen
Abstract:
A single-mode all-silica photonic crystal fiber with an effective area of 600 square-micron and low bending loss is demonstrated. The fiber is characterized in terms of attenuation, chromatic dispersion and modal properties.
A single-mode all-silica photonic crystal fiber with an effective area of 600 square-micron and low bending loss is demonstrated. The fiber is characterized in terms of attenuation, chromatic dispersion and modal properties.
△ Less
Submitted 14 November, 2003;
originally announced November 2003.
-
Modeling of realistic cladding structures for air-core photonic band-gap fibers
Authors:
Niels Asger Mortensen,
Martin Dybendal Nielsen
Abstract:
Cladding structures of photonic band-gap fibers often have air-holes of non-circular shape and, typically, close-to-hexagonal air holes with curved corners are observed. We study photonic band-gaps in such structures by aid of a two-parameter representation of the size and curvature. For the fundamental band-gap we find that the band-gap edges (the intersections with the air line) shift toward s…
▽ More
Cladding structures of photonic band-gap fibers often have air-holes of non-circular shape and, typically, close-to-hexagonal air holes with curved corners are observed. We study photonic band-gaps in such structures by aid of a two-parameter representation of the size and curvature. For the fundamental band-gap we find that the band-gap edges (the intersections with the air line) shift toward shorter wavelengths when the air-filling fraction f is increased. The band-gap also broadens and the relative band-width increases exponentially with f^2. Comparing to recent experiments [Nature 424, 657 (2003)] we find very good agreement.
△ Less
Submitted 30 October, 2003;
originally announced October 2003.
-
Photonic crystal fiber design based on the V-parameter
Authors:
Martin Dybendal Nielsen,
Niels Asger Mortensen
Abstract:
Based on a recent formulation of the V-parameter of a photonic crystal fiber we provide numerically based empirical expressions for this quantity only dependent on the two structural parameters - the air hole diameter and the hole-to-hole center spacing. Based on the unique relation between the V-parameter and the equivalent mode field radius we identify how the parameter space for these fibers…
▽ More
Based on a recent formulation of the V-parameter of a photonic crystal fiber we provide numerically based empirical expressions for this quantity only dependent on the two structural parameters - the air hole diameter and the hole-to-hole center spacing. Based on the unique relation between the V-parameter and the equivalent mode field radius we identify how the parameter space for these fibers is restricted in order for the fibers to remain single mode while still having a guided mode confined to the core region.
△ Less
Submitted 15 October, 2003;
originally announced October 2003.
-
Mode-Field Radius of Photonic Crystal Fibers Expressed by the V-parameter
Authors:
M. D. Nielsen,
N. A. Mortensen,
J. R. Folkenberg,
A. Bjarklev
Abstract:
We numerically calculate the equivalent mode-field radius of the fundamental mode in a photonic crystal fiber (PCF) and show that this is a function of the V-parameter only and not the relative hole size. This dependency is similar to what is found for graded-index standard fibers and we furthermore show that the relation for the PCF can be excellently approximated with the same general mathemat…
▽ More
We numerically calculate the equivalent mode-field radius of the fundamental mode in a photonic crystal fiber (PCF) and show that this is a function of the V-parameter only and not the relative hole size. This dependency is similar to what is found for graded-index standard fibers and we furthermore show that the relation for the PCF can be excellently approximated with the same general mathematical expression. This is to our knowledge the first semi-analytical description of the mode-field radius of a PCF.
△ Less
Submitted 4 September, 2003;
originally announced September 2003.
-
Modal cut-off and the V-parameter in photonic crystal fibers
Authors:
N. A. Mortensen,
J. R. Folkenberg,
M. D. Nielsen,
K. P. Hansen
Abstract:
We address the long-standing unresolved problem concerning the V-parameter in a photonic crystal fiber (PCF). Formulate the parameter appropriate for a core-defect in a periodic structure we argue that the multi-mode cut-off occurs at a wavelength lambda* which satisfies V_PCF(lambda*)=pi. Comparing to numerics and recent cut-off calculations we confirm this result.
We address the long-standing unresolved problem concerning the V-parameter in a photonic crystal fiber (PCF). Formulate the parameter appropriate for a core-defect in a periodic structure we argue that the multi-mode cut-off occurs at a wavelength lambda* which satisfies V_PCF(lambda*)=pi. Comparing to numerics and recent cut-off calculations we confirm this result.
△ Less
Submitted 2 July, 2003;
originally announced July 2003.
-
Reduced micro-deformation attenuation in large-mode area photonic crystal fibers for visible applications
Authors:
M. D. Nielsen,
N. A. Mortensen,
J. R. Folkenberg
Abstract:
We consider large-mode area photonic crystal fibers for visible applications where micro-deformation induced attenuation becomes a potential problem when the effective area A_eff is sufficiently large compared to lambda^2. We argue how a slight increase in fiber diameter D can be used in screening the high-frequency components of the micro-deformation spectrum mechanically and we confirm this ex…
▽ More
We consider large-mode area photonic crystal fibers for visible applications where micro-deformation induced attenuation becomes a potential problem when the effective area A_eff is sufficiently large compared to lambda^2. We argue how a slight increase in fiber diameter D can be used in screening the high-frequency components of the micro-deformation spectrum mechanically and we confirm this experimentally for both 15 and 20 micron core fibers. For typical bending-radii (R~16 cm) the operating band-width increases by ~3-400 nm to the low-wavelength side.
△ Less
Submitted 10 June, 2003;
originally announced June 2003.
-
Improved large-mode area endlessly single-mode photonic crystal fibers
Authors:
N. A. Mortensen,
M. D. Nielsen,
J. R. Folkenberg,
A. Petersson,
H. R. Simonsen
Abstract:
We numerically study the possibilities for improved large-mode area endlessly single mode photonic crystal fibers for use in high-power delivery applications. By carefully choosing the optimal hole diameter we find that a triangular core formed by three missing neighboring air holes considerably improves the mode area and loss properties compared to the case with a core formed by one missing air…
▽ More
We numerically study the possibilities for improved large-mode area endlessly single mode photonic crystal fibers for use in high-power delivery applications. By carefully choosing the optimal hole diameter we find that a triangular core formed by three missing neighboring air holes considerably improves the mode area and loss properties compared to the case with a core formed by one missing air hole. In a realized fiber we demonstrate an enhancement of the mode area by ~30 % without a corresponding increase in the attenuation.
△ Less
Submitted 12 November, 2002;
originally announced November 2002.
-
Products of Random Matrices
Authors:
A. D. Jackson,
B. Lautrup,
P. Johansen,
M. Nielsen
Abstract:
We derive analytic expressions for infinite products of random 2x2 matrices. The determinant of the target matrix is log-normally distributed, whereas the remainder is a surprisingly complicated function of a parameter characterizing the norm of the matrix and a parameter characterizing its skewness. The distribution may have importance as an uncommitted prior in statistical image analysis.
We derive analytic expressions for infinite products of random 2x2 matrices. The determinant of the target matrix is log-normally distributed, whereas the remainder is a surprisingly complicated function of a parameter characterizing the norm of the matrix and a parameter characterizing its skewness. The distribution may have importance as an uncommitted prior in statistical image analysis.
△ Less
Submitted 12 February, 2002;
originally announced February 2002.