-
Using Convolutional Neural Networks to detect Edge Localized Modes in DIII-D from Doppler Backscattering measurements
Authors:
N. Q. X. Teo,
V. H. Hall-Chen,
K. Barada,
R. J. H. Ng,
L. Gu,
A. K. Yeoh,
Q. T. Pratt,
X. Garbet,
T. L. Rhodes
Abstract:
In H-mode tokamak plasmas, the plasma is sometimes ejected beyond the edge transport barrier. These events are known as edge localized modes (ELMs). ELMs cause a loss of energy and damage the vessel walls. Understanding the physics of ELMs and by extension, how to detect and mitigate them, is an important challenge. In this paper, we focus on two diagnostic methods $\unicode{x2013}$ D-alpha spectr…
▽ More
In H-mode tokamak plasmas, the plasma is sometimes ejected beyond the edge transport barrier. These events are known as edge localized modes (ELMs). ELMs cause a loss of energy and damage the vessel walls. Understanding the physics of ELMs and by extension, how to detect and mitigate them, is an important challenge. In this paper, we focus on two diagnostic methods $\unicode{x2013}$ D-alpha spectroscopy and Doppler backscattering (DBS). The former detects ELMs by measuring Balmer alpha emission while the latter uses microwave radiation to probe the plasma. DBS has the advantage of having higher temporal resolution and robustness to damage. These advantages of DBS diagnostics may be beneficial for future operational tokamaks and thus data processing techniques for DBS should be developed in preparation. In sight of this, we explore the training of neural networks to detect ELMs from DBS data, using D-alpha data as the ground truth. With shots found in the DIII-D database, the model is trained to classify each time step based on the occurrence of an ELM event. The results are promising. When tested on shots similar to those used for training, the model is capable of consistently achieving a high f1-score of 0.93. This score is a performance metric for imbalanced datasets that ranges between 0 and 1. We evaluate the performance of our neural network on a variety of ELMs $\unicode{x2013}$ grasssy, suppressed, and wide pedestal $\unicode{x2013}$ finding broad applicability. Beyond ELMs, our work demonstrates the wider feasibility of applying neural networks to data from DBS diagnostics.
△ Less
Submitted 3 July, 2024; v1 submitted 3 June, 2024;
originally announced June 2024.
-
Observer study-based evaluation of TGAN architecture used to generate oncological PET images
Authors:
Roberto Fedrigo,
Fereshteh Yousefirizi,
Zi** Liu,
Abhinav K. Jha,
Robert V. Bergen,
Jean-Francois Rajotte,
Raymond T. Ng,
Ingrid Bloise,
Sara Harsini,
Dan J. Kadrmas,
Carlos Uribe,
Arman Rahmim
Abstract:
The application of computer-vision algorithms in medical imaging has increased rapidly in recent years. However, algorithm training is challenging due to limited sample sizes, lack of labeled samples, as well as privacy concerns regarding data sharing. To address these issues, we previously developed (Bergen et al. 2022) a synthetic PET dataset for Head and Neck (H and N) cancer using the temporal…
▽ More
The application of computer-vision algorithms in medical imaging has increased rapidly in recent years. However, algorithm training is challenging due to limited sample sizes, lack of labeled samples, as well as privacy concerns regarding data sharing. To address these issues, we previously developed (Bergen et al. 2022) a synthetic PET dataset for Head and Neck (H and N) cancer using the temporal generative adversarial network (TGAN) architecture and evaluated its performance segmenting lesions and identifying radiomics features in synthesized images. In this work, a two-alternative forced-choice (2AFC) observer study was performed to quantitatively evaluate the ability of human observers to distinguish between real and synthesized oncological PET images. In the study eight trained readers, including two board-certified nuclear medicine physicians, read 170 real/synthetic image pairs presented as 2D-transaxial using a dedicated web app. For each image pair, the observer was asked to identify the real image and input their confidence level with a 5-point Likert scale. P-values were computed using the binomial test and Wilcoxon signed-rank test. A heat map was used to compare the response accuracy distribution for the signed-rank test. Response accuracy for all observers ranged from 36.2% [27.9-44.4] to 63.1% [54.8-71.3]. Six out of eight observers did not identify the real image with statistical significance, indicating that the synthetic dataset was reasonably representative of oncological PET images. Overall, this study adds validity to the realism of our simulated H&N cancer dataset, which may be implemented in the future to train AI algorithms while favoring patient confidentiality and privacy protection.
△ Less
Submitted 27 November, 2023; v1 submitted 27 November, 2023;
originally announced November 2023.
-
Quantum thermometry with single molecules in portable nanoprobes
Authors:
V. Esteso,
R. Duquennoy,
R. C. Ng,
M. Colautti,
P. Lombardi,
G. Arregui,
E. Chavez-Ángel,
C. M. Sotomayor-Torres,
P. D. García,
M. Hilke,
C. Toninelli
Abstract:
Understanding heat transport is relevant to develop efficient strategies for thermal management in microelectronics for instance, as well as for fundamental science purposes. However, measuring temperatures in nanostructured environments and in cryogenic conditions remains a challenging task, that requires both high sentitivity and a non-invasive approach. Here we present a portable nanothermomete…
▽ More
Understanding heat transport is relevant to develop efficient strategies for thermal management in microelectronics for instance, as well as for fundamental science purposes. However, measuring temperatures in nanostructured environments and in cryogenic conditions remains a challenging task, that requires both high sentitivity and a non-invasive approach. Here we present a portable nanothermometer based on a molecular two-level quantum system that operates in the 3 - 30 K temperature range, with excellent temperature and spatial resolutions on the order of mK and $μ$m, respectively. We validate the performance of this molecular thermometer on nanostructures, by estimating the thermal conductivity of a patterned silicon membrane. In addition, we demonstrate the two-dimensional temperature map** of a patterned surface via the simultaneous spectroscopy of all thermometers deposited on a sample. These results demonstrate the potential of this molecular thermometer to explore thermal properties and related phenomena at cryogenic temperatures.
△ Less
Submitted 7 March, 2023;
originally announced March 2023.
-
Intermodulation of optical frequency combs in a multimode optomechanical system
Authors:
Ryan C. Ng,
Paul Nizet,
Daniel Navarro-Urrios,
Guillermo Arregui,
Marcus Albrechtsen,
Pedro D. García,
Søren Stobbe,
Clivia M. Sotomayor-Torres,
Guilhem Madiot
Abstract:
Phonons offer the possibility to connect the microwave and optical domains while being efficiently transduced with electronic and optical signals. Here, we present a multimodal optomechanical platform, consisting of a mechanical-optical-mechanical resonator configuration. The mechanical modes, with frequencies at 265 MHz and 6.8 GHz, can be simultaneously excited into a phonon lasing regime as sup…
▽ More
Phonons offer the possibility to connect the microwave and optical domains while being efficiently transduced with electronic and optical signals. Here, we present a multimodal optomechanical platform, consisting of a mechanical-optical-mechanical resonator configuration. The mechanical modes, with frequencies at 265 MHz and 6.8 GHz, can be simultaneously excited into a phonon lasing regime as supported by a stability analysis of the system. Both the MHz and the GHz modes enter a self-sustained oscillation regime, leading to the intermodulation of two frequency combs in the optical field. We characterize this platform experimentally, demonstrating previously unexplored dynamical regimes. These results suggest the possibility to control multiple mechanical degrees of freedom via a single optical mode, with implications in GHz phononic devices, signal processing, and optical comb sensing applications.
△ Less
Submitted 3 March, 2023; v1 submitted 28 October, 2022;
originally announced October 2022.
-
Optomechanical generation of coherent GHz vibrations in a phononic waveguide
Authors:
Guilhem Madiot,
Ryan C. Ng,
Guillermo Arregui,
Omar Florez,
Marcus Albrechtsen,
Søren Stobbe,
Pedro D. Garcia,
Clivia M. Sotomayor-Torres
Abstract:
Nanophononics has the potential for information transfer, in an analogous manner to its photonic and electronic counterparts. The adoption of phononic systems has been limited, due to difficulties associated with the generation, manipulation, and detection of phonons, especially at GHz frequencies. Existing techniques often require piezoelectric materials with an external radiofrequency excitation…
▽ More
Nanophononics has the potential for information transfer, in an analogous manner to its photonic and electronic counterparts. The adoption of phononic systems has been limited, due to difficulties associated with the generation, manipulation, and detection of phonons, especially at GHz frequencies. Existing techniques often require piezoelectric materials with an external radiofrequency excitation that are not readily integrated into existing CMOS infrastructures, while non-piezoelectric demonstrations have been inefficient. In this work, we explore the optomechanical generation of coherent phonons in a suspended 2D silicon phononic crystal cavity with a guided mode around 6.8 GHz. By incorporating an air-slot into this cavity, we turn the phononic waveguide into an optomechanical platform that exploits localized photonic modes resulting from inherent fabrication imperfections for the transduction of mechanics. Such a platform exhibits very fine control of phonons using light, and is capable of coherent self-sustained phonon generation via mechanical lasing around 6.8 GHz. The ability to generate high frequency coherent mechanical vibrations within such a simple 2D CMOS-compatible system could be a first step towards the development of sources in phononic circuitry and the coherent manipulation of other solid-state properties.
△ Less
Submitted 14 June, 2022;
originally announced June 2022.
-
Excitation and detection of acoustic phonons in nanoscale systems
Authors:
Ryan C Ng,
Alexandros El Sachat,
Francisco Cespedes,
Martin Poblet,
Guilhem Madiot,
Juliana Jaramillo-Fernandez,
Peng Xiao,
Omar Florez,
Marianna Sledzinska,
Clivia Sotomayor-Torres,
Emigdio Chavez-Angel
Abstract:
Phonons play a key role in the physical properties of materials, and have long been a topic of study in physics. While the effects of phonons had historically been considered to be a hindrance, modern research has shown that phonons can be exploited due to their ability to couple to other excitations and consequently affect the thermal, dielectric, and electronic properties of solid state systems,…
▽ More
Phonons play a key role in the physical properties of materials, and have long been a topic of study in physics. While the effects of phonons had historically been considered to be a hindrance, modern research has shown that phonons can be exploited due to their ability to couple to other excitations and consequently affect the thermal, dielectric, and electronic properties of solid state systems, greatly motivating the engineering of phononic structures. Advances in nanofabrication have allowed for structuring and phonon confinement even down to the nanoscale, drastically changing material properties. Despite developments in fabricating such nanoscale devices, the proper manipulation and characterization of phonons continues to be challenging. However, a fundamental understanding of these processes could enable the realization of key applications in diverse fields such as topological phononics, information technologies, sensing, and quantum electrodynamics, especially when integrated with existing electronic and photonic devices. Here, we highlight seven of the available methods for the excitation and detection of acoustic phonons and vibrations in solid materials, as well as advantages, disadvantages, and additional considerations related to their application. We then provide perspectives towards open challenges in nanophononics and how the additional understanding granted by these techniques could serve to enable the next generation of phononic technological applications.
△ Less
Submitted 29 March, 2022;
originally announced March 2022.
-
Engineering nanoscale hypersonic phonon transport
Authors:
O. Florez,
G. Arregui,
M. Albrechtsen,
R. C. Ng,
J. Gomis-Bresco,
S. Stobbe,
C. M. Sotomayor-Torres,
P. D. García
Abstract:
Controlling the vibrations in solids is crucial to tailor their mechanical properties and their interaction with light. Thermal vibrations represent a source of noise and dephasing for many physical processes at the quantum level. One strategy to avoid these vibrations is to structure a solid such that it possesses a phononic stop band, i.e., a frequency range over which there are no available mec…
▽ More
Controlling the vibrations in solids is crucial to tailor their mechanical properties and their interaction with light. Thermal vibrations represent a source of noise and dephasing for many physical processes at the quantum level. One strategy to avoid these vibrations is to structure a solid such that it possesses a phononic stop band, i.e., a frequency range over which there are no available mechanical modes. Here, we demonstrate the complete absence of mechanical vibrations at room temperature over a broad spectral window, with a 5.3 GHz wide band gap centered at 8.4 GHz in a patterned silicon nanostructure membrane measured using Brillouin light scattering spectroscopy. By constructing a line-defect waveguide, we directly measure GHz localized modes at room temperature. Our experimental results of thermally excited guided mechanical modes at GHz frequencies provides an eficient platform for photon-phonon integration with applications in optomechanics and signal processing transduction.
△ Less
Submitted 9 February, 2022; v1 submitted 4 February, 2022;
originally announced February 2022.
-
3-D PET Image Generation with tumour masks using TGAN
Authors:
Robert V Bergen,
Jean-Francois Rajotte,
Fereshteh Yousefirizi,
Ivan S Klyuzhin,
Arman Rahmim,
Raymond T. Ng
Abstract:
Training computer-vision related algorithms on medical images for disease diagnosis or image segmentation is difficult due to the lack of training data, labeled samples, and privacy concerns. For this reason, a robust generative method to create synthetic data is highly sought after. However, most three-dimensional image generators require additional image input or are extremely memory intensive.…
▽ More
Training computer-vision related algorithms on medical images for disease diagnosis or image segmentation is difficult due to the lack of training data, labeled samples, and privacy concerns. For this reason, a robust generative method to create synthetic data is highly sought after. However, most three-dimensional image generators require additional image input or are extremely memory intensive. To address these issues we propose adapting video generation techniques for 3-D image generation. Using the temporal GAN (TGAN) architecture, we show we are able to generate realistic head and neck PET images. We also show that by conditioning the generator on tumour masks, we are able to control the geometry and location of the tumour in the generated images. To test the utility of the synthetic images, we train a segmentation model using the synthetic images. Synthetic images conditioned on real tumour masks are automatically segmented, and the corresponding real images are also segmented. We evaluate the segmentations using the Dice score and find the segmentation algorithm performs similarly on both datasets (0.65 synthetic data, 0.70 real data). Various radionomic features are then calculated over the segmented tumour volumes for each data set. A comparison of the real and synthetic feature distributions show that seven of eight feature distributions had statistically insignificant differences (p>0.05). Correlation coefficients were also calculated between all radionomic features and it is shown that all of the strong statistical correlations in the real data set are preserved in the synthetic data set.
△ Less
Submitted 2 November, 2021;
originally announced November 2021.
-
Cavity optomechanics with Anderson-localized optical modes
Authors:
Guillermo Arregui,
Ryan Cecil Ng,
Marcus Albrechtsen,
Søren Stobbe,
Clivia Marfa Sotomayor Torres,
Pedro David García
Abstract:
Confining photons in cavities enhances the interactions between light and matter. In cavity optomechanics, this enables a wealth of phenomena ranging from optomechanically induced transparency to macroscopic objects cooled to their motional ground state. Previous work in cavity optomechanics employed devices where ubiquitous structural disorder played no role beyond perturbing resonance frequencie…
▽ More
Confining photons in cavities enhances the interactions between light and matter. In cavity optomechanics, this enables a wealth of phenomena ranging from optomechanically induced transparency to macroscopic objects cooled to their motional ground state. Previous work in cavity optomechanics employed devices where ubiquitous structural disorder played no role beyond perturbing resonance frequencies and quality factors. More generally, the interplay between disorder, which must be described by statistical physics, and optomechanical effects has thus far been unexplored. Here, we demonstrate how sidewall roughness in air-slot photonic-crystal waveguides can induce sufficiently strong backscattering of slot-guided light to create Anderson-localized modes with quality factors as high as half a million and mode volumes that are below the diffraction limit. We observe how the interaction between these disorder-induced optical modes and in-plane mechanical modes of the slotted membrane is governed by a distribution of coupling rates, which can exceed $g_{\text{o}}/2π\sim 200$ kHz, leading to mechanical amplification up to self sustained oscillations via optomechanical backaction. Our work constitutes the first steps towards understanding optomechanics in the multiple-scattering regime and opens new perspectives for exploring complex systems with multitude mutually-coupled degrees of freedom.
△ Less
Submitted 1 April, 2022; v1 submitted 21 October, 2021;
originally announced October 2021.
-
A Modular Design of Continuously Tunable Full Color Plasmonic Pixels with Broken Rotational Symmetry
Authors:
Rui Feng,
Hao Wang,
Yongyin Cao,
Ray J. H. Ng,
You Sin Tan,
Yanxia Zhang,
Fangkui Sun,
Cheng-Wei Qiu,
Joel K. W. Yang,
Weiqiang Ding
Abstract:
Color tuning is a fascinating and indispensable property in applications such as advanced display, active camouflaging and information encryption. Thus far, a variety of reconfigurable approaches have been implemented to achieve color change. However, it is still a challenge to enable a continuous color tuning over the entire hue range in a simple, stable and rapid manner without changes in config…
▽ More
Color tuning is a fascinating and indispensable property in applications such as advanced display, active camouflaging and information encryption. Thus far, a variety of reconfigurable approaches have been implemented to achieve color change. However, it is still a challenge to enable a continuous color tuning over the entire hue range in a simple, stable and rapid manner without changes in configuration and material properties. Here, we demonstrate an all-optical continuously tunable plasmonic pixel scheme via a modular design approach to realize polarization-controlled full color tuning by breaking the intrinsic symmetry of the unit cell layout. The polarization-controlled full color tunable plasmonic pixels consist of three different types of color modules oriented at an angle of 60° with respect to each other, corresponding to three subtractive primary colors. Without changing the structural properties or surrounding environment, the structural colors can be continuously and precisely tuned across all hues by illuminating linearly polarized light with different polarization directions. Meanwhile, the plasmonic pixels can be flexibly customized for various color tuning processes, such as different initial output colors and color tuning sequences, through the appropriate choice of component modules and the elaborate design of module layouts. Furthermore, we extend the color tuning to achromatic colors, white or black, with the utilization of a single module or the introduction of a black module. The proposed polarization-controlled full color tunable plasmonic pixels hold considerable potential to function as next-generation color pixels integrated with liquid-crystal polarizers.
△ Less
Submitted 21 August, 2021;
originally announced August 2021.
-
Tunable Mie Resonances in the Visible Spectrum
Authors:
Li Lu,
Zhaogang Dong,
Febiana Tijiptoharsono,
Ray Jia Hong Ng,
Hongtao Wang,
Soroosh Daqiqeh Rezaei,
Yunzheng Wang,
Hai Sheng Leong,
Joel K. W. Yang,
Robert E. Simpson
Abstract:
Dielectric optical nanoantennas play an important role in color displays, metasurface holograms, and wavefront sha** applications. They usually exploit Mie resonances as supported on nanostructures with high refractive index, such as Si and TiO2. However, these resonances normally cannot be tuned. Although phase change materials, such as the germanium-antimony-tellurium alloys and post transitio…
▽ More
Dielectric optical nanoantennas play an important role in color displays, metasurface holograms, and wavefront sha** applications. They usually exploit Mie resonances as supported on nanostructures with high refractive index, such as Si and TiO2. However, these resonances normally cannot be tuned. Although phase change materials, such as the germanium-antimony-tellurium alloys and post transition metal oxides, such as ITO, have been used to tune optical antennas in the near infrared spectrum, tunable dielectric antennae in the visible spectrum remain to be demonstrated. In this paper, we designed and experimentally demonstrated tunable dielectric nanoantenna arrays with Mie resonances in the visible spectrum, exploiting phase transitions in wide-bandgap Sb2S3 nano-resonators. In the amorphous state, Mie resonances in these Sb2S3 nanostructures give rise to a strong structural color in reflection mode. Thermal annealing induced crystallization and laser induced amorphization of the Sb2S3 resonators allow the color to be tuned reversibly. We believe these tunable Sb2S3 nanoantennae arrays will enable a wide variety of tunable nanophotonic applications, such as high-resolution color displays, holographic displays, and miniature LiDAR systems.
△ Less
Submitted 14 July, 2021;
originally announced July 2021.
-
Schrodinger's Red Pixel by Quasi Bound-State-In-Continuum
Authors:
Zhaogang Dong,
Lei **,
Soroosh Daqiqeh Rezaei,
Hao Wang,
Yang Chen,
Febiana Tjiptoharsono,
**fa Ho,
Sergey Gorelik,
Ray Jia Hong Ng,
Qifeng Ruan,
Cheng-Wei Qiu,
Joel K. W. Yang
Abstract:
While structural colors are ubiquitous in nature, saturated reds are mysteriously absent. Hence, a longstanding problem is in fabricating nanostructured surfaces that exhibit reflectance approaching the theoretical limit. This limit is termed the Schrodinger red and demands sharp spectral transitions from "stopband" to a high reflectance "passband" with total suppression of higher-order resonances…
▽ More
While structural colors are ubiquitous in nature, saturated reds are mysteriously absent. Hence, a longstanding problem is in fabricating nanostructured surfaces that exhibit reflectance approaching the theoretical limit. This limit is termed the Schrodinger red and demands sharp spectral transitions from "stopband" to a high reflectance "passband" with total suppression of higher-order resonances at blue and green wavelengths. Current approaches based on metallic or dielectric nanoantennas are insufficient to simultaneously meet these conditions. Here, for the 1st time, we designed and fabricated tall Si nanoantenna arrays on quartz substrate to support two partially overlap** y polarized quasi bound-state-in-the-continuum (q-BIC) modes in the red wavelengths with sharp spectral edges. These structures produce possibly the most saturated and brightest reds with ~80% reflectance, exceeding the red vertex in sRGB and even the cadmium red pigment. We employed a gradient descent algorithm with structures supporting q BIC as the starting point. Although the current design is polarization dependent, the proposed paradigm has enabled us to achieve the elusive structural red and the design principle could be generalized to Schrodinger's pixels of other colors. The design is suitable for scale up using other nanofabrication techniques for larger area applications, such as red pixels in displays, decorative coatings, and miniaturized spectrometers with high wavelength selectivity.
△ Less
Submitted 23 June, 2021;
originally announced June 2021.
-
Miniscope3D: optimized single-shot miniature 3D fluorescence microscopy
Authors:
Kyrollos Yanny,
Nick Antipa,
William Liberti,
Sam Dehaeck,
Kristina Monakhova,
Fanglin Linda Liu,
Konlin Shen,
Ren Ng,
Laura Waller
Abstract:
Miniature fluorescence microscopes are a standard tool in systems biology. However, widefield miniature microscopes capture only 2D information, and modifications that enable 3D capabilities increase the size and weight and have poor resolution outside a narrow depth range. Here, we achieve the 3D capability by replacing the tube lens of a conventional 2D Miniscope with an optimized multifocal pha…
▽ More
Miniature fluorescence microscopes are a standard tool in systems biology. However, widefield miniature microscopes capture only 2D information, and modifications that enable 3D capabilities increase the size and weight and have poor resolution outside a narrow depth range. Here, we achieve the 3D capability by replacing the tube lens of a conventional 2D Miniscope with an optimized multifocal phase mask at the objective's aperture stop. Placing the phase mask at the aperture stop significantly reduces the size of the device, and varying the focal lengths enables a uniform resolution across a wide depth range. The phase mask encodes the 3D fluorescence intensity into a single 2D measurement, and the 3D volume is recovered by solving a sparsity-constrained inverse problem. We provide methods for designing and fabricating the phase mask and an efficient forward model that accounts for the field-varying aberrations in miniature objectives. We demonstrate a prototype that is 17 mm tall and weighs 2.5 grams, achieving 2.76 $μ$m lateral, and 15 $μ$m axial resolution across most of the 900x700x390 $μm^3$ volume at 40 volumes per second. The performance is validated experimentally on resolution targets, dynamic biological samples, and mouse brain tissue. Compared with existing miniature single-shot volume-capture implementations, our system is smaller and lighter and achieves a more than 2x better lateral and axial resolution throughout a 10x larger usable depth range. Our microscope design provides single-shot 3D imaging for applications where a compact platform matters, such as volumetric neural imaging in freely moving animals and 3D motion studies of dynamic samples in incubators and lab-on-a-chip devices.
△ Less
Submitted 11 October, 2020;
originally announced October 2020.
-
Fabrication Development of a Large Area Grating for Out of Plane Beam Coupling
Authors:
Jonathan Trisno,
Tong Hua Lee,
Parvathi Nair S.,
You Sin Tan,
Ray J. H. Ng,
Yingyan Huang,
Seng Tiong Ho,
Joel K. W. Yang
Abstract:
We develop a single-layer waveguide surface grating structure to vertically couple near infrared (NIR) light at ~1.55 um wavelength from a large area (~100 um length scale) Si waveguide on a Silicon-On-Insulator (SOI) substrates to free-space for high-power laser applications. Our design approach is based on the optimization of local emission angles and the out-coupling intensities. Simulation res…
▽ More
We develop a single-layer waveguide surface grating structure to vertically couple near infrared (NIR) light at ~1.55 um wavelength from a large area (~100 um length scale) Si waveguide on a Silicon-On-Insulator (SOI) substrates to free-space for high-power laser applications. Our design approach is based on the optimization of local emission angles and the out-coupling intensities. Simulation results show that a focal spot with a 1/e2 width of 3.82 um can be achieved at the desired focal position, with 33% (-4.81 dB) simulated source to free-space focusing efficiency, while initial measurements show an efficiency of 22% (-6.58 dB).
△ Less
Submitted 7 October, 2020;
originally announced October 2020.
-
Experimental investigations of acoustic curtains for hospital environment noise mitigations
Authors:
Sanjay Kumar,
Rui Qin Ng,
Heow Pueh Lee
Abstract:
The continuous increase of hospital noise levels has become a vital challenge for society. The complex soundscapes in the hospital produce unpleasant noise, which may exceed the prescribed noise level for the patients and healthcare professionals. Previous studies have reported that extended exposure to loud noise may cause auditory and nonauditory disorders in healthcare professionals, medical st…
▽ More
The continuous increase of hospital noise levels has become a vital challenge for society. The complex soundscapes in the hospital produce unpleasant noise, which may exceed the prescribed noise level for the patients and healthcare professionals. Previous studies have reported that extended exposure to loud noise may cause auditory and nonauditory disorders in healthcare professionals, medical staff, and patients. Therefore, there is an increased interest for the design and fabrication of effective noise barriers for the hospital premises. Herein, we have performed the thorough experimental investigations on the acoustical performances for PVC coated polyester fabrics and 100 % pure PVC sheets. The performances of these potential acoustic curtains have found to be superior to that of existing acoustic curtains for hospitals. Also, the results showed that the sound transmission class rating of PVC curtains are much higher than the existing commercial acoustic curtains.
△ Less
Submitted 15 August, 2020;
originally announced August 2020.
-
Structural Color 3D Printing By Shrinking Photonic Crystals
Authors:
Ye**g Liu,
Hao Wang,
**fa Ho,
Ryan C. Ng,
Ray J. H. Ng,
Valerian H. Hall-Chen,
Eleen H. H. Koay,
Zhaogang Dong,
Hailong Liu,
Cheng-Wei Qiu,
Julia R. Greer,
Joel K. W. Yang
Abstract:
The rings, spots and stripes found on some butterflies, Pachyrhynchus weevils, and many chameleons are notable examples of natural organisms employing photonic crystals to produce colorful patterns. Despite advances in nanotechnology, we still lack the ability to print arbitrary colors and shapes in all three dimensions at this microscopic length scale. Commercial nanoscale 3D printers based on tw…
▽ More
The rings, spots and stripes found on some butterflies, Pachyrhynchus weevils, and many chameleons are notable examples of natural organisms employing photonic crystals to produce colorful patterns. Despite advances in nanotechnology, we still lack the ability to print arbitrary colors and shapes in all three dimensions at this microscopic length scale. Commercial nanoscale 3D printers based on two-photon polymerization are incapable of patterning photonic crystal structures with the requisite ~300 nm lattice constant to achieve photonic stopbands/ bandgaps in the visible spectrum and generate colors. Here, we introduce a means to produce 3D-printed photonic crystals with a 5x reduction in lattice constants (periodicity as small as 280 nm), achieving sub-100-nm features with a full range of colors. The reliability of this process enables us to engineer the bandstructures of woodpile photonic crystals that match experiments, showing that observed colors can be attributed to either slow light modes or stopbands. With these lattice structures as 3D color volumetric elements (voxels), we printed 3D microscopic scale objects, including the first multi-color microscopic model of the Eiffel Tower measuring only 39-microns tall with a color pixel size of 1.45 microns. The technology to print 3D structures in color at the microscopic scale promises the direct patterning and integration of spectrally selective devices, such as photonic crystal-based color filters, onto free-form optical elements and curved surfaces.
△ Less
Submitted 14 May, 2019;
originally announced May 2019.
-
Wide band gap phase change material tuned visible photonics
Authors:
Weiling Dong,
Hailong Liu,
Jitendra K Behera,
Li Lu,
Ray J. H. Ng,
Kandammathe Valiyaveedu Sreekanth,
Xilin Zhou,
Joel K. W. Yang,
Robert E. Simpson
Abstract:
Light strongly interacts with structures that are of a similar scale to its wavelength; typically nanoscale features for light in the visible spectrum. However, the optical response of these nanostructures is usually fixed during the fabrication. Phase change materials offer a way to tune the properties of these structures in nanoseconds. Until now, phase change active photonics use materials that…
▽ More
Light strongly interacts with structures that are of a similar scale to its wavelength; typically nanoscale features for light in the visible spectrum. However, the optical response of these nanostructures is usually fixed during the fabrication. Phase change materials offer a way to tune the properties of these structures in nanoseconds. Until now, phase change active photonics use materials that strongly absorb visible light, which limits their application in the visible spectrum. In contrast, Stibnite (Sb2S3) is an under-explored phase change material with a band gap that can be tuned in the visible spectrum from 2.0 to 1.7 eV. We deliberately couple this tuneable band gap to an optical resonator such that it responds dramatically in the visible spectrum to Sb2S3 reversible structural phase transitions. We show that this optical response can be triggered both optically and electrically. High speed reprogrammable Sb2S3 based photonic devices, such as those reported here, are likely to have wide applications in future intelligent photonic systems, holographic displays, and micro-spectrometers.
△ Less
Submitted 27 August, 2018; v1 submitted 20 August, 2018;
originally announced August 2018.
