-
Relative Measurement and Extrapolation of the Scintillation Quenching Factor of $α$-Particles in Liquid Argon using DEAP-3600 Data
Authors:
The DEAP Collaboration,
P. Adhikari,
M. Alpízar-Venegas,
P. -A. Amaudruz,
J. Anstey,
D. J. Auty,
M. Batygov,
B. Beltran,
C. E. Bina,
W. Bonivento,
M. G. Boulay,
J. F. Bueno,
B. Cai,
M. Cárdenas-Montes,
S. Choudhary,
B. T. Cleveland,
R. Crampton,
S. Daugherty,
P. DelGobbo,
P. Di Stefano,
G. Dolganov,
L. Doria,
F. A. Duncan,
M. Dunford,
E. Ellingwood
, et al. (73 additional authors not shown)
Abstract:
The knowledge of scintillation quenching of $α$-particles plays a paramount role in understanding $α$-induced backgrounds and improving the sensitivity of liquid argon-based direct detection of dark matter experiments. We performed a relative measurement of scintillation quenching in the MeV energy region using radioactive isotopes ($^{222}$Rn, $^{218}$Po and $^{214}$Po isotopes) present in trace…
▽ More
The knowledge of scintillation quenching of $α$-particles plays a paramount role in understanding $α$-induced backgrounds and improving the sensitivity of liquid argon-based direct detection of dark matter experiments. We performed a relative measurement of scintillation quenching in the MeV energy region using radioactive isotopes ($^{222}$Rn, $^{218}$Po and $^{214}$Po isotopes) present in trace amounts in the DEAP-3600 detector and quantified the uncertainty of extrapolating the quenching factor to the low-energy region.
△ Less
Submitted 12 June, 2024;
originally announced June 2024.
-
TeV Solar Gamma Rays as a probe for the Solar Internetwork Magnetic Fields
Authors:
Kenny C. Y. Ng,
Andrew Hillier,
Shin'ichiro Ando
Abstract:
The magnetic fields that emerge from beneath the solar surface and permeate the solar atmosphere are the key drivers of space weather and, thus, understanding them is important to human society. Direct observations, used to measure magnetic fields, can only probe the magnetic fields in the photosphere and above, far from the regions the magnetic fields are being enhanced by the solar dynamo. Solar…
▽ More
The magnetic fields that emerge from beneath the solar surface and permeate the solar atmosphere are the key drivers of space weather and, thus, understanding them is important to human society. Direct observations, used to measure magnetic fields, can only probe the magnetic fields in the photosphere and above, far from the regions the magnetic fields are being enhanced by the solar dynamo. Solar gamma rays produced by cosmic rays interacting with the solar atmosphere have been detected from GeV to TeV energy range, and revealed that they are significantly affected by solar magnetic fields. However, much of the observations are yet to be explained by a physical model. Using a semi-analytic model, we show that magnetic fields at and below the photosphere with a large horizontal component could explain the $\sim$1 TeV solar gamma rays observed by HAWC. This could allow high-energy solar gamma rays to be a novel probe for magnetic fields below the photosphere.
△ Less
Submitted 27 May, 2024;
originally announced May 2024.
-
The Design and Construction of the Chips Water Cherenkov Neutrino Detector
Authors:
B. Alonso Rancurel,
N. Angelides,
G. Augustoni,
S. Bash,
B. Bergmann,
N. Bertschinger,
P. Bizouard,
M. Campbell,
S. Cao,
T. J. Carroll,
R. Castellan,
E. Catano-Mur,
J. P. Cesar,
J. A. B. Coelho,
P. Dills,
T. Dodwell,
J. Edmondson,
D. van Eijk,
Q. Fetterly,
Z. Garbal,
S. Germani,
T. Gilpin,
A. Giraudo,
A. Habig,
D. Hanuska
, et al. (42 additional authors not shown)
Abstract:
CHIPS (CHerenkov detectors In mine PitS) was a prototype large-scale water Cherenkov detector located in northern Minnesota. The main aim of the R&D project was to demonstrate that construction costs of neutrino oscillation detectors could be reduced by at least an order of magnitude compared to other equivalent experiments. This article presents design features of the CHIPS detector along with de…
▽ More
CHIPS (CHerenkov detectors In mine PitS) was a prototype large-scale water Cherenkov detector located in northern Minnesota. The main aim of the R&D project was to demonstrate that construction costs of neutrino oscillation detectors could be reduced by at least an order of magnitude compared to other equivalent experiments. This article presents design features of the CHIPS detector along with details of the implementation and deployment of the prototype. While issues during and after the deployment of the detector prevented data taking, a number of key concepts and designs were successfully demonstrated.
△ Less
Submitted 22 January, 2024;
originally announced January 2024.
-
Liquid-shaped microlens for scalable production of ultrahigh-resolution OCT microendoscope
Authors:
Chao Xu,
Xin Guan,
Syeda Aimen Abbasi,
Neng Xia,
To Ngai,
Li Zhang,
Ho-Pui Ho,
Sze Hang Calvin Ng,
Wu Yuan
Abstract:
Endoscopic optical coherence tomography (OCT) is a valuable tool for providing diagnostic images of internal organs and guiding interventions in real time. Miniaturized OCT endoscopes are essential for imaging small and convoluted luminal organs while minimizing invasiveness. However, current methods for fabricating miniature fiber probes have limited ability to correct optical aberrations, leadin…
▽ More
Endoscopic optical coherence tomography (OCT) is a valuable tool for providing diagnostic images of internal organs and guiding interventions in real time. Miniaturized OCT endoscopes are essential for imaging small and convoluted luminal organs while minimizing invasiveness. However, current methods for fabricating miniature fiber probes have limited ability to correct optical aberrations, leading to suboptimal imaging performance. In this study, we introduce a new paradigm of liquid sha** technique for the rapid and scalable fabrication of ultrathin and high-performance OCT microendoscopes suitable for minimally invasive clinical applications. This technique enables the flexible customization of freeform microlenses with sub-nanometer optical surface roughness by regulating the minimum energy state of curable optical liquid on a wettability-modified substrate and precisely controlling the liquid volume and physical boundary on a substrate. Using this technique, we simultaneously fabricated 800-nm OCT microendoscopes with a diameter of approximately 0.6 mm and evaluated their ultrahigh-resolution imaging performance in the esophagus of rats and the aorta and brain of mice.
△ Less
Submitted 27 November, 2023;
originally announced November 2023.
-
SSIN: Self-Supervised Learning for Rainfall Spatial Interpolation
Authors:
Jia Li,
Yanyan Shen,
Lei Chen,
Charles Wang Wai NG
Abstract:
The acquisition of accurate rainfall distribution in space is an important task in hydrological analysis and natural disaster pre-warning. However, it is impossible to install rain gauges on every corner. Spatial interpolation is a common way to infer rainfall distribution based on available raingauge data. However, the existing works rely on some unrealistic pre-settings to capture spatial correl…
▽ More
The acquisition of accurate rainfall distribution in space is an important task in hydrological analysis and natural disaster pre-warning. However, it is impossible to install rain gauges on every corner. Spatial interpolation is a common way to infer rainfall distribution based on available raingauge data. However, the existing works rely on some unrealistic pre-settings to capture spatial correlations, which limits their performance in real scenarios. To tackle this issue, we propose the SSIN, which is a novel data-driven self-supervised learning framework for rainfall spatial interpolation by mining latent spatial patterns from historical observation data. Inspired by the Cloze task and BERT, we fully consider the characteristics of spatial interpolation and design the SpaFormer model based on the Transformer architecture as the core of SSIN. Our main idea is: by constructing rich self-supervision signals via random masking, SpaFormer can learn informative embeddings for raw data and then adaptively model spatial correlations based on rainfall spatial context. Extensive experiments on two real-world raingauge datasets show that our method outperforms the state-of-the-art solutions. In addition, we take traffic spatial interpolation as another use case to further explore the performance of our method, and SpaFormer achieves the best performance on one large real-world traffic dataset, which further confirms the effectiveness and generality of our method.
△ Less
Submitted 26 November, 2023;
originally announced November 2023.
-
High-Resolution Particle-In-Cell Simulations of Two-Dimensional Bernstein-Greene-Kruskal Modes
Authors:
J. McClung,
M. T. Franciscovich,
K. Germaschewski,
C. S. Ng
Abstract:
We present two dimensional (2D) particle-in-cell (PIC) simulations of 2D Bernstein-Greene-Kruskal (BGK) modes, which are exact nonlinear steady-state solutions of the Vlasov-Poisson equations, on a 2D plane perpendicular to a background magnetic field, with a cylindrically symmetric electric potential localized on the plane. PIC simulations are initialized using analytic electron distributions and…
▽ More
We present two dimensional (2D) particle-in-cell (PIC) simulations of 2D Bernstein-Greene-Kruskal (BGK) modes, which are exact nonlinear steady-state solutions of the Vlasov-Poisson equations, on a 2D plane perpendicular to a background magnetic field, with a cylindrically symmetric electric potential localized on the plane. PIC simulations are initialized using analytic electron distributions and electric potentials from the theory. We confirm the validity of such solutions using high-resolutions up to a 2048^2 grid. We show that the solutions are dynamically stable for a stronger background magnetic field, while kee** other parameters of the model fixed, but become unstable when the field strength is weaker than a certain value. When a mode becomes unstable, we observe that the instability begins with the excitation of azimuthal electrostatic waves that ends with a spiral pattern.
△ Less
Submitted 14 November, 2023;
originally announced November 2023.
-
An Integrated Simulation Tool for Dark Current Radiation Effects Using ACE3P and Geant4
Authors:
Lixin Ge,
Zenghai Li,
Cho-Kuen Ng,
Liling Xiao,
Hiroyasu Ego,
Yoshinori Enomoto,
Hiroshi Iwase,
Yu Morikawa,
Takashi Yoshimoto
Abstract:
A simulation workflow is under development to interface particle data transfer and matching of geometry between the electromagnetic (EM) cavity simulation code ACE3P and radiation code Geant4. The target is to simulate dark current (DC) radiation effects for the KEK 56-cell S-band accelerating structure using ACE3P and Geant4, and benchmark against KEK experiment data. As a first step, ACE3P DC si…
▽ More
A simulation workflow is under development to interface particle data transfer and matching of geometry between the electromagnetic (EM) cavity simulation code ACE3P and radiation code Geant4. The target is to simulate dark current (DC) radiation effects for the KEK 56-cell S-band accelerating structure using ACE3P and Geant4, and benchmark against KEK experiment data. As a first step, ACE3P DC simulations using a 7-cell structure have been performed by first calculating the operating mode in the structure and then tracking field-emitted electrons under the influence of the EM fields of the mode. The ACE3P simulation results agree well with the EM software CST for an accelerating gradient of 21.8 MV/m. The reader/writer I/O in ACE3P and the transfer of particle data from Track3P to Geant4 for DC radiation effects studies have been implemented. The simulation workflow between the two codes will be demonstrated with the goal of performing large-scale simulations for the KEK 56-cell structure. In addition to modeling DC effects in linacs, the integrated simulation workflow will be applicable to studying positron source and capture structure for future lepton colliders.
△ Less
Submitted 18 August, 2023;
originally announced August 2023.
-
Rising and settling 2D cylinders with centre-of-mass offset
Authors:
Martin P. A. Assen,
Jelle B. Will,
Chong Shen Ng,
Detlef Lohse,
Roberto Verzicco,
Dominik Krug
Abstract:
Rotational effects are commonly neglected when considering the dynamics of freely rising or settling isotropic particles. Here, we demonstrate that particle rotations play an important role for rising as well as for settling cylinders in situations when mass eccentricity, and thereby a new pendulum timescale, is introduced to the system. We employ two-dimensional simulations to study the motion of…
▽ More
Rotational effects are commonly neglected when considering the dynamics of freely rising or settling isotropic particles. Here, we demonstrate that particle rotations play an important role for rising as well as for settling cylinders in situations when mass eccentricity, and thereby a new pendulum timescale, is introduced to the system. We employ two-dimensional simulations to study the motion of a single cylinder in a quiescent unbounded incompressible Newtonian fluid. This allows us to vary the Galileo number, density ratio, relative moment of inertia, and Centre-Of-Mass offset (COM) systematically and beyond what is feasible experimentally. For certain buoyant density ratios, the particle dynamics exhibit a resonance mode, during which the coupling via the Magnus lift force causes a positive feedback between translational and rotational motions. This mode results in vastly different trajectories with significantly larger rotational and translational amplitudes and an increase of the drag coefficient easily exceeding a factor two. We propose a simple model that captures how the occurrence of the COM offset induced resonance regime varies, depending on the other input parameters, specifically the density ratio, the Galileo number, and the relative moment of inertia. Remarkably, depending on the input parameters, resonance can be observed for centre-of-mass offsets as small as a few percent of the particle diameter, showing that the particle dynamics can be highly sensitive to this parameter.
△ Less
Submitted 7 January, 2024; v1 submitted 8 August, 2023;
originally announced August 2023.
-
Beam Delivery and Beamstrahlung Considerations for Ultra-High Energy Linear Colliders
Authors:
Tim Barklow,
Spencer Gessner,
Mark Hogan,
Cho-Kuen Ng,
Michael Peskin,
Tor Raubenheimer,
Glen White,
Erik Adli,
Gevy Jiawei Cao,
Carl A. Lindstrom,
Kyrre Sjobak,
Sam Barber,
Cameron Geddes,
Arianna Formenti,
Remi Lehe,
Carl Schroeder,
Davide Terzani,
Jeroen van Tilborg,
Jean-Luc Vay,
Edoardo Zoni,
Chris Doss,
Michael Litos,
Ihar Lobach,
John Power,
Maximilian Swiatlowski
, et al. (5 additional authors not shown)
Abstract:
As part of the Snowmass'21 community planning excercise, the Advanced Accelerator Concepts (AAC) community proposed future linear colliders with center-of-mass energies up to 15 TeV and luminosities up to 50$\times10^{34}$ cm$^{-2}$s$^{-1}$ in a compact footprint. In addition to being compact, these machines must also be energy efficient. We identify two challenges that must be addressed in the de…
▽ More
As part of the Snowmass'21 community planning excercise, the Advanced Accelerator Concepts (AAC) community proposed future linear colliders with center-of-mass energies up to 15 TeV and luminosities up to 50$\times10^{34}$ cm$^{-2}$s$^{-1}$ in a compact footprint. In addition to being compact, these machines must also be energy efficient. We identify two challenges that must be addressed in the design of these machines. First, the Beam Delivery System (BDS) must not add significant length to the accelerator complex. Second, beam parameters must be chosen to mitigate beamstrahlung effects and maximize the luminosity-per-power of the machine. In this paper, we review advances in plasma lens technology that will help to reduce the length of the BDS system and we detail new Particle-in-Cell simulation studies that will provide insight into beamstrahlung mitigation techniques. We apply our analysis to both $e^+e^-$ and $γγ$ colliders.
△ Less
Submitted 31 May, 2023; v1 submitted 30 April, 2023;
originally announced May 2023.
-
Quantum thermometry with single molecules in portable nanoprobes
Authors:
V. Esteso,
R. Duquennoy,
R. C. Ng,
M. Colautti,
P. Lombardi,
G. Arregui,
E. Chavez-Ángel,
C. M. Sotomayor-Torres,
P. D. García,
M. Hilke,
C. Toninelli
Abstract:
Understanding heat transport is relevant to develop efficient strategies for thermal management in microelectronics for instance, as well as for fundamental science purposes. However, measuring temperatures in nanostructured environments and in cryogenic conditions remains a challenging task, that requires both high sentitivity and a non-invasive approach. Here we present a portable nanothermomete…
▽ More
Understanding heat transport is relevant to develop efficient strategies for thermal management in microelectronics for instance, as well as for fundamental science purposes. However, measuring temperatures in nanostructured environments and in cryogenic conditions remains a challenging task, that requires both high sentitivity and a non-invasive approach. Here we present a portable nanothermometer based on a molecular two-level quantum system that operates in the 3 - 30 K temperature range, with excellent temperature and spatial resolutions on the order of mK and $μ$m, respectively. We validate the performance of this molecular thermometer on nanostructures, by estimating the thermal conductivity of a patterned silicon membrane. In addition, we demonstrate the two-dimensional temperature map** of a patterned surface via the simultaneous spectroscopy of all thermometers deposited on a sample. These results demonstrate the potential of this molecular thermometer to explore thermal properties and related phenomena at cryogenic temperatures.
△ Less
Submitted 7 March, 2023;
originally announced March 2023.
-
Precision Measurement of the Specific Activity of $^{39}$Ar in Atmospheric Argon with the DEAP-3600 Detector
Authors:
P. Adhikari,
R. Ajaj,
M. Alpízar-Venegas,
P. -A. Amaudruz,
J. Anstey,
G. R. Araujo,
D. J. Auty,
M. Baldwin,
M. Batygov,
B. Beltran,
H. Benmansour,
C. E. Bina,
J. Bonatt,
W. Bonivento,
M. G. Boulay,
B. Broerman,
J. F. Bueno,
P. M. Burghardt,
A. Butcher,
M. Cadeddu,
B. Cai,
M. Cárdenas-Montes,
S. Cavuoti,
M. Chen,
Y. Chen
, et al. (125 additional authors not shown)
Abstract:
The specific activity of the beta decay of $^{39}$Ar in atmospheric argon is measured using the DEAP-3600 detector. DEAP-3600, located 2 km underground at SNOLAB, uses a total of (3269 $\pm$ 24) kg of liquid argon distilled from the atmosphere to search for dark matter. This detector with very low background uses pulseshape discrimination to differentiate between nuclear recoils and electron recoi…
▽ More
The specific activity of the beta decay of $^{39}$Ar in atmospheric argon is measured using the DEAP-3600 detector. DEAP-3600, located 2 km underground at SNOLAB, uses a total of (3269 $\pm$ 24) kg of liquid argon distilled from the atmosphere to search for dark matter. This detector with very low background uses pulseshape discrimination to differentiate between nuclear recoils and electron recoils and is well-suited to measure the decay of $^{39}$Ar. With 167 live-days of data, the measured specific activity at the time of atmospheric extraction is [0.964 $\pm$ 0.001 (stat) $\pm$ 0.024 (sys)] Bq/kg$_{\rm atmAr}$ which is consistent with results from other experiments. A cross-check analysis using different event selection criteria provides a consistent result.
△ Less
Submitted 10 October, 2023; v1 submitted 27 February, 2023;
originally announced February 2023.
-
Intermodulation of optical frequency combs in a multimode optomechanical system
Authors:
Ryan C. Ng,
Paul Nizet,
Daniel Navarro-Urrios,
Guillermo Arregui,
Marcus Albrechtsen,
Pedro D. García,
Søren Stobbe,
Clivia M. Sotomayor-Torres,
Guilhem Madiot
Abstract:
Phonons offer the possibility to connect the microwave and optical domains while being efficiently transduced with electronic and optical signals. Here, we present a multimodal optomechanical platform, consisting of a mechanical-optical-mechanical resonator configuration. The mechanical modes, with frequencies at 265 MHz and 6.8 GHz, can be simultaneously excited into a phonon lasing regime as sup…
▽ More
Phonons offer the possibility to connect the microwave and optical domains while being efficiently transduced with electronic and optical signals. Here, we present a multimodal optomechanical platform, consisting of a mechanical-optical-mechanical resonator configuration. The mechanical modes, with frequencies at 265 MHz and 6.8 GHz, can be simultaneously excited into a phonon lasing regime as supported by a stability analysis of the system. Both the MHz and the GHz modes enter a self-sustained oscillation regime, leading to the intermodulation of two frequency combs in the optical field. We characterize this platform experimentally, demonstrating previously unexplored dynamical regimes. These results suggest the possibility to control multiple mechanical degrees of freedom via a single optical mode, with implications in GHz phononic devices, signal processing, and optical comb sensing applications.
△ Less
Submitted 3 March, 2023; v1 submitted 28 October, 2022;
originally announced October 2022.
-
Towards realistic simulations of human cough: effect of droplet emission duration and spread angle
Authors:
Mogeng Li,
Kai Leong Chong,
Chong Shen Ng,
Prateek Bahl,
Charitha M. de Silva,
Roberto Verzicco,
Con Doolan,
C. Raina MacIntyre,
Detlef Lohse
Abstract:
Human respiratory events, such as coughing and sneezing, play an important role in the host-to-host airborne transmission of diseases. Thus, there has been a substantial effort in understanding these processes: various analytical or numerical models have been developed to describe them, but their validity has not been fully assessed due to the difficulty of a direct comparison with real human exha…
▽ More
Human respiratory events, such as coughing and sneezing, play an important role in the host-to-host airborne transmission of diseases. Thus, there has been a substantial effort in understanding these processes: various analytical or numerical models have been developed to describe them, but their validity has not been fully assessed due to the difficulty of a direct comparison with real human exhalations. In this study, we report a unique comparison between datasets that have both detailed measurements of a real human cough using spirometer and particle tracking velocimetry, and direct numerical simulation at similar conditions. By examining the experimental data, we find that the injection velocity at the mouth is not uni-directional. Instead, the droplets are injected into various directions, with their trajectories forming a cone shape in space. Furthermore, we find that the period of droplet emissions is much shorter than that of the cough: experimental results indicate that the droplets with an initial diameter $\gtrsim 10μ$m are emitted within the first 0.05 s, whereas the cough duration is closer to 1 s. These two features (the spread in the direction of injection velocity and the short duration of droplet emission) are incorporated into our direct numerical simulation, leading to an improved agreement with the experimental measurements. Thus, to have accurate representations of human expulsions in respiratory models, it is imperative to include parametrisation of these two features.
△ Less
Submitted 2 October, 2022;
originally announced October 2022.
-
RF Accelerator Technology R&D: Report of AF7-rf Topical Group to Snowmass 2021
Authors:
Sergey Belomestnykh,
Emilio A. Nanni,
Hans Weise,
Sergey V. Baryshev,
Pashupati Dhakal,
Rongli Geng,
Bianca Giaccone,
Chunguang **g,
Matthias Liepe,
Xueying Lu,
Tianhuan Luo,
Ganapati Myneni,
Alireza Nassiri,
David Neuffer,
Cho-Kuen Ng,
Sam Posen,
Sami Tantawi,
Anne-Marie Valente-Feliciano,
Jean-Luc Vay,
Brandon Weatherford,
Akira Yamamoto
Abstract:
Accelerator radio frequency (RF) technology has been and remains critical for modern high energy physics (HEP) experiments based on particle accelerators. Tremendous progress in advancing this technology has been achieved over the past decade in several areas highlighted in this report. These achievements and new results expected from continued R&D efforts could pave the way for upgrades of existi…
▽ More
Accelerator radio frequency (RF) technology has been and remains critical for modern high energy physics (HEP) experiments based on particle accelerators. Tremendous progress in advancing this technology has been achieved over the past decade in several areas highlighted in this report. These achievements and new results expected from continued R&D efforts could pave the way for upgrades of existing facilities, improvements to accelerators already under construction (e.g., PIP-II), well-developed proposals (e.g., ILC, CLIC), and/or enable concepts under development, such as FCC-ee, CEPC, C3, HELEN, multi-MW Fermilab Proton Intensity Upgrade, future Muon Colloder, etc. Advances in RF technology have impact beyond HEP on accelerators built for nuclear physics, basic energy sciences, and other areas. Recent examples of such accelerators are European XFEL, LCLS-II and LCLS-II-HE, SHINE, SNS, ESS, FRIB, and EIC. To support and enable new accelerator-based applications and even make some of them feasible, we must continue addressing their challenges via a comprehensive RF R&D program that would advance the existing RF technologies and explore the nascent ones.
△ Less
Submitted 25 August, 2022;
originally announced August 2022.
-
Bubble-particle collisions in turbulence: insights from point-particle simulations
Authors:
Timothy T. K. Chan,
Chong Shen Ng,
Dominik Krug
Abstract:
Bubble-particle collisions in turbulence are central to a variety of processes such as froth flotation. Despite their importance, details of the collision process have not received much attention yet. This is compounded by the sometimes counter-intuitive behaviour of bubbles and particles in turbulence, as exemplified by the fact that they segregate in space. Although bubble-particle relative beha…
▽ More
Bubble-particle collisions in turbulence are central to a variety of processes such as froth flotation. Despite their importance, details of the collision process have not received much attention yet. This is compounded by the sometimes counter-intuitive behaviour of bubbles and particles in turbulence, as exemplified by the fact that they segregate in space. Although bubble-particle relative behaviour is fundamentally different from that of identical particles, the existing theoretical models are nearly all extensions of theories for particle-particle collisions in turbulence. The adequacy of these theories has yet to be assessed as appropriate data remain scarce to date. In this investigation, we study the geometric collision rate by means of direct numerical simulations of bubble-particle collisions in homogeneous isotropic turbulence using the point-particle approach over a range of the relevant parameters, including the Stokes and Reynolds numbers. We analyse the spatial distribution of bubble and particles, and quantify to what extent their segregation reduces the collision rate. This effect is countered by increased approach velocities for bubble-particle compared to monodisperse pairs, which we relate to the difference in how bubbles and particles respond to fluid accelerations. We found that in the investigated parameter range, these collision statistics are not altered significantly by the inclusion of a lift force or different drag parametrisations, or when assuming infinite particle density. Furthermore, we critically examine existing models and discuss inconsistencies therein that contribute to the discrepancy.
△ Less
Submitted 7 March, 2023; v1 submitted 5 August, 2022;
originally announced August 2022.
-
A "Galactic Disk"-Model for Three-Dimensional Bernstein-Greene-Kruskal Modes in a Finite Magnetic Field
Authors:
C. S. Ng
Abstract:
A new model, inspired by the structure of galactic disks, for three-dimensional Bernstein-Greene-Kruskal (BGK) modes in a plasma with a uniform finite background magnetic field is presented. These modes are exact nonlinear solutions of the steady-state Vlasov equation, with an electric potential and a magnetic potential perturbation localized in all three spatial dimensions that satisfies the Pois…
▽ More
A new model, inspired by the structure of galactic disks, for three-dimensional Bernstein-Greene-Kruskal (BGK) modes in a plasma with a uniform finite background magnetic field is presented. These modes are exact nonlinear solutions of the steady-state Vlasov equation, with an electric potential and a magnetic potential perturbation localized in all three spatial dimensions that satisfies the Poisson equation, and the Ampere Law, self-consistently. The existence of solutions is shown analytically in the limit of small electric and magnetic field perturbations associated with the disk species, and numerically using an iterative method that converges up to moderately strong field perturbations.
△ Less
Submitted 23 July, 2022;
originally announced July 2022.
-
Optomechanical generation of coherent GHz vibrations in a phononic waveguide
Authors:
Guilhem Madiot,
Ryan C. Ng,
Guillermo Arregui,
Omar Florez,
Marcus Albrechtsen,
Søren Stobbe,
Pedro D. Garcia,
Clivia M. Sotomayor-Torres
Abstract:
Nanophononics has the potential for information transfer, in an analogous manner to its photonic and electronic counterparts. The adoption of phononic systems has been limited, due to difficulties associated with the generation, manipulation, and detection of phonons, especially at GHz frequencies. Existing techniques often require piezoelectric materials with an external radiofrequency excitation…
▽ More
Nanophononics has the potential for information transfer, in an analogous manner to its photonic and electronic counterparts. The adoption of phononic systems has been limited, due to difficulties associated with the generation, manipulation, and detection of phonons, especially at GHz frequencies. Existing techniques often require piezoelectric materials with an external radiofrequency excitation that are not readily integrated into existing CMOS infrastructures, while non-piezoelectric demonstrations have been inefficient. In this work, we explore the optomechanical generation of coherent phonons in a suspended 2D silicon phononic crystal cavity with a guided mode around 6.8 GHz. By incorporating an air-slot into this cavity, we turn the phononic waveguide into an optomechanical platform that exploits localized photonic modes resulting from inherent fabrication imperfections for the transduction of mechanics. Such a platform exhibits very fine control of phonons using light, and is capable of coherent self-sustained phonon generation via mechanical lasing around 6.8 GHz. The ability to generate high frequency coherent mechanical vibrations within such a simple 2D CMOS-compatible system could be a first step towards the development of sources in phononic circuitry and the coherent manipulation of other solid-state properties.
△ Less
Submitted 14 June, 2022;
originally announced June 2022.
-
Excitation and detection of acoustic phonons in nanoscale systems
Authors:
Ryan C Ng,
Alexandros El Sachat,
Francisco Cespedes,
Martin Poblet,
Guilhem Madiot,
Juliana Jaramillo-Fernandez,
Peng Xiao,
Omar Florez,
Marianna Sledzinska,
Clivia Sotomayor-Torres,
Emigdio Chavez-Angel
Abstract:
Phonons play a key role in the physical properties of materials, and have long been a topic of study in physics. While the effects of phonons had historically been considered to be a hindrance, modern research has shown that phonons can be exploited due to their ability to couple to other excitations and consequently affect the thermal, dielectric, and electronic properties of solid state systems,…
▽ More
Phonons play a key role in the physical properties of materials, and have long been a topic of study in physics. While the effects of phonons had historically been considered to be a hindrance, modern research has shown that phonons can be exploited due to their ability to couple to other excitations and consequently affect the thermal, dielectric, and electronic properties of solid state systems, greatly motivating the engineering of phononic structures. Advances in nanofabrication have allowed for structuring and phonon confinement even down to the nanoscale, drastically changing material properties. Despite developments in fabricating such nanoscale devices, the proper manipulation and characterization of phonons continues to be challenging. However, a fundamental understanding of these processes could enable the realization of key applications in diverse fields such as topological phononics, information technologies, sensing, and quantum electrodynamics, especially when integrated with existing electronic and photonic devices. Here, we highlight seven of the available methods for the excitation and detection of acoustic phonons and vibrations in solid materials, as well as advantages, disadvantages, and additional considerations related to their application. We then provide perspectives towards open challenges in nanophononics and how the additional understanding granted by these techniques could serve to enable the next generation of phononic technological applications.
△ Less
Submitted 29 March, 2022;
originally announced March 2022.
-
C$^3$ Demonstration Research and Development Plan
Authors:
Emilio A. Nanni,
Martin Breidenbach,
Caterina Vernieri,
Sergey Belomestnykh,
Pushpalatha Bhat,
Sergei Nagaitsev,
Mei Bai,
William Berg,
Tim Barklow,
John Byrd,
Ankur Dhar,
Ram C. Dhuley,
Chris Doss,
Joseph Duris,
Auralee Edelen,
Claudio Emma,
Josef Frisch,
Annika Gabriel,
Spencer Gessner,
Carsten Hast,
Chunguang **g,
Arkadiy Klebaner,
Anatoly K. Krasnykh,
John Lewellen,
Matthias Liepe
, et al. (25 additional authors not shown)
Abstract:
C$^3$ is an opportunity to realize an e$^+$e$^-$ collider for the study of the Higgs boson at $\sqrt{s} = 250$ GeV, with a well defined upgrade path to 550 GeV while staying on the same short facility footprint. C$^3$ is based on a fundamentally new approach to normal conducting linear accelerators that achieves both high gradient and high efficiency at relatively low cost. Given the advanced stat…
▽ More
C$^3$ is an opportunity to realize an e$^+$e$^-$ collider for the study of the Higgs boson at $\sqrt{s} = 250$ GeV, with a well defined upgrade path to 550 GeV while staying on the same short facility footprint. C$^3$ is based on a fundamentally new approach to normal conducting linear accelerators that achieves both high gradient and high efficiency at relatively low cost. Given the advanced state of linear collider designs, the key system that requires technical maturation for C$^3$ is the main linac. This white paper presents the staged approach towards a facility to demonstrate C$^3$ technology with both Direct (source and main linac) and Parallel (beam delivery, dam** ring, ancillary component) R&D. The white paper also includes discussion on the approach for technology industrialization, related HEP R&D activities that are enabled by C$^3$ R&D, infrastructure requirements and siting options.
△ Less
Submitted 6 July, 2022; v1 submitted 17 March, 2022;
originally announced March 2022.
-
Snowmass21 Accelerator Modeling Community White Paper
Authors:
S. Biedron,
L. Brouwer,
D. L. Bruhwiler,
N. M. Cook,
A. L. Edelen,
D. Filippetto,
C. -K. Huang,
A. Huebl,
T. Katsouleas,
N. Kuklev,
R. Lehe,
S. Lund,
C. Messe,
W. Mori,
C. -K. Ng,
D. Perez,
P. Piot,
J. Qiang,
R. Roussel,
D. Sagan,
A. Sahai,
A. Scheinker,
M. Thévenet,
F. Tsung,
J. -L. Vay
, et al. (2 additional authors not shown)
Abstract:
After a summary of relevant comments and recommendations from various reports over the last ten years, this paper examines the modeling needs in accelerator physics, from the modeling of single beams and individual accelerator elements, to the realization of virtual twins that replicate all the complexity to model a particle accelerator complex as accurately as possible. We then discuss cutting-ed…
▽ More
After a summary of relevant comments and recommendations from various reports over the last ten years, this paper examines the modeling needs in accelerator physics, from the modeling of single beams and individual accelerator elements, to the realization of virtual twins that replicate all the complexity to model a particle accelerator complex as accurately as possible. We then discuss cutting-edge and emerging computing opportunities, such as advanced algorithms, AI/ML and quantum computing, computational needs in hardware, software performance, portability and scalability, and needs for scalable I/O and in-situ analysis. Considerations of reliability, long-term sustainability, user support and training are considered next, before discussing the benefits of ecosystems with integrated workflows based on standardized input and output, and with integrated frameworks and data repositories developed as a community. Last, we highlight how the community can work more collaboratively and efficiently through the development of consortia and centers, and via collaboration with industry.
△ Less
Submitted 22 September, 2022; v1 submitted 15 March, 2022;
originally announced March 2022.
-
Engineering nanoscale hypersonic phonon transport
Authors:
O. Florez,
G. Arregui,
M. Albrechtsen,
R. C. Ng,
J. Gomis-Bresco,
S. Stobbe,
C. M. Sotomayor-Torres,
P. D. García
Abstract:
Controlling the vibrations in solids is crucial to tailor their mechanical properties and their interaction with light. Thermal vibrations represent a source of noise and dephasing for many physical processes at the quantum level. One strategy to avoid these vibrations is to structure a solid such that it possesses a phononic stop band, i.e., a frequency range over which there are no available mec…
▽ More
Controlling the vibrations in solids is crucial to tailor their mechanical properties and their interaction with light. Thermal vibrations represent a source of noise and dephasing for many physical processes at the quantum level. One strategy to avoid these vibrations is to structure a solid such that it possesses a phononic stop band, i.e., a frequency range over which there are no available mechanical modes. Here, we demonstrate the complete absence of mechanical vibrations at room temperature over a broad spectral window, with a 5.3 GHz wide band gap centered at 8.4 GHz in a patterned silicon nanostructure membrane measured using Brillouin light scattering spectroscopy. By constructing a line-defect waveguide, we directly measure GHz localized modes at room temperature. Our experimental results of thermally excited guided mechanical modes at GHz frequencies provides an eficient platform for photon-phonon integration with applications in optomechanics and signal processing transduction.
△ Less
Submitted 9 February, 2022; v1 submitted 4 February, 2022;
originally announced February 2022.
-
Bayesian Solar Wind Modeling with Pulsar Timing Arrays
Authors:
Jeffrey S. Hazboun,
Joseph Simon,
Dustin R. Madison,
Zaven Arzoumanian,
Kathryn Crowter,
Megan E. DeCesar,
Paul B. Demorest,
Timothy Dolch,
Justin A. Ellis,
Robert D. Ferdman,
Elizabeth C. Ferrara,
Emmanuel Fonseca,
Peter A. Gentile,
Glenn Jones,
Megan L. Jones,
Michael T. Lam,
Lina Levin,
Duncan R. Lorimer,
Ryan S. Lynch,
Maura A. McLaughlin,
Cherry Ng,
David J. Nice,
Timothy T. Pennucci,
Scott M. Ransom,
Paul S. Ray
, et al. (5 additional authors not shown)
Abstract:
Using Bayesian analyses we study the solar electron density with the NANOGrav 11-year pulsar timing array (PTA) dataset. Our model of the solar wind is incorporated into a global fit starting from pulse times-of-arrival. We introduce new tools developed for this global fit, including analytic expressions for solar electron column densities and open source models for the solar wind that port into e…
▽ More
Using Bayesian analyses we study the solar electron density with the NANOGrav 11-year pulsar timing array (PTA) dataset. Our model of the solar wind is incorporated into a global fit starting from pulse times-of-arrival. We introduce new tools developed for this global fit, including analytic expressions for solar electron column densities and open source models for the solar wind that port into existing PTA software. We perform an ab initio recovery of various solar wind model parameters. We then demonstrate the richness of information about the solar electron density, $n_E$, that can be gleaned from PTA data, including higher order corrections to the simple $1/r^2$ model associated with a free-streaming wind (which are informative probes of coronal acceleration physics), quarterly binned measurements of $n_E$ and a continuous time-varying model for $n_E$ spanning approximately one solar cycle period. Finally, we discuss the importance of our model for chromatic noise mitigation in gravitational-wave analyses of pulsar timing data and the potential of develo** synergies between sophisticated PTA solar electron density models and those developed by the solar physics community.
△ Less
Submitted 17 November, 2021;
originally announced November 2021.
-
A radio technosignature search towards Proxima Centauri resulting in a signal-of-interest
Authors:
Shane Smith,
Danny C Price,
Sofia Z Sheikh,
Daniel J Czech,
Steve Croft,
David DeBoer,
Vishal Gajjar,
Howard Isaacson,
Brian C Lacki,
Matt Lebofsky,
David HE MacMahon,
Cherry Ng,
Karen I Perez,
Andrew PV Siemion,
Claire Isabel Webb,
Jamie Drew,
S Pete Worden,
Andrew Zic
Abstract:
The detection of life beyond Earth is an ongoing scientific endeavour, with profound implications. One approach, known as the search for extraterrestrial intelligence (SETI), seeks to find engineered signals (`technosignatures') that indicate the existence technologically-capable life beyond Earth. Here, we report on the detection of a narrowband signal-of-interest at ~982 MHz, recorded during obs…
▽ More
The detection of life beyond Earth is an ongoing scientific endeavour, with profound implications. One approach, known as the search for extraterrestrial intelligence (SETI), seeks to find engineered signals (`technosignatures') that indicate the existence technologically-capable life beyond Earth. Here, we report on the detection of a narrowband signal-of-interest at ~982 MHz, recorded during observations toward Proxima Centauri with the Parkes Murriyang radio telescope. This signal, `BLC1', has characteristics broadly consistent with hypothesized technosignatures and is one of the most compelling candidates to date. Analysis of BLC1 -- which we ultimately attribute to being an unusual but locally-generated form of interference -- is provided in a companion paper (Sheikh et al., 2021). Nevertheless, our observations of Proxima Centauri are the most sensitive search for radio technosignatures ever undertaken on a star target.
△ Less
Submitted 15 November, 2021;
originally announced November 2021.
-
Analysis of the Breakthrough Listen signal of interest blc1 with a technosignature verification framework
Authors:
Sofia Z. Sheikh,
Shane Smith,
Danny C. Price,
David DeBoer,
Brian C. Lacki,
Daniel J. Czech,
Steve Croft,
Vishal Gajjar,
Howard Isaacson,
Matt Lebofsky,
David H. E. MacMahon,
Cherry Ng,
Karen I. Perez,
Andrew P. V. Siemion,
Claire Isabel Webb,
Andrew Zic,
Jamie Drew,
S. Pete Worden
Abstract:
The aim of the search for extraterrestrial intelligence (SETI) is to find technologically-capable life beyond Earth through their technosignatures. On 2019 April 29, the Breakthrough Listen SETI project observed Proxima Centauri with the Parkes 'Murriyang' radio telescope. These data contained a narrowband signal with characteristics broadly consistent with a technosignature near 982 MHz ('blc1').…
▽ More
The aim of the search for extraterrestrial intelligence (SETI) is to find technologically-capable life beyond Earth through their technosignatures. On 2019 April 29, the Breakthrough Listen SETI project observed Proxima Centauri with the Parkes 'Murriyang' radio telescope. These data contained a narrowband signal with characteristics broadly consistent with a technosignature near 982 MHz ('blc1'). Here we present a procedure for the analysis of potential technosignatures, in the context of the ubiquity of human-generated radio interference, which we apply to blc1. Using this procedure, we find that blc1 is not an extraterrestrial technosignature, but rather an electronically-drifting intermodulation product of local, time-varying interferers aligned with the observing cadence. We find dozens of instances of radio interference with similar morphologies to blc1 at frequencies harmonically related to common clock oscillators. These complex intermodulation products highlight the necessity for detailed follow-up of any signal-of-interest using a procedure such as the one outlined in this work.
△ Less
Submitted 11 November, 2021;
originally announced November 2021.
-
C$^3$: A "Cool" Route to the Higgs Boson and Beyond
Authors:
Mei Bai,
Tim Barklow,
Rainer Bartoldus,
Martin Breidenbach,
Philippe Grenier,
Zhirong Huang,
Michael Kagan,
John Lewellen,
Zenghai Li,
Thomas W. Markiewicz,
Emilio A. Nanni,
Mamdouh Nasr,
Cho-Kuen Ng,
Marco Oriunno,
Michael E. Peskin,
Thomas G. Rizzo,
James Rosenzweig,
Ariel G. Schwartzman,
Vladimir Shiltsev,
Evgenya Simakov,
Bruno Spataro,
Dong Su,
Sami Tantawi,
Caterina Vernieri,
Glen White
, et al. (1 additional authors not shown)
Abstract:
We present a proposal for a cold copper distributed coupling accelerator that can provide a rapid route to precision Higgs physics with a compact 8 km footprint. This proposal is based on recent advances that increase the efficiency and operating gradient of a normal conducting accelerator. This technology also provides an $e^{+}e^{-}$ collider path to physics at multi-TeV energies. In this articl…
▽ More
We present a proposal for a cold copper distributed coupling accelerator that can provide a rapid route to precision Higgs physics with a compact 8 km footprint. This proposal is based on recent advances that increase the efficiency and operating gradient of a normal conducting accelerator. This technology also provides an $e^{+}e^{-}$ collider path to physics at multi-TeV energies. In this article, we describe our vision for this technology and the near-term R&D program needed to pursue it.
△ Less
Submitted 27 October, 2021;
originally announced October 2021.
-
Cavity optomechanics with Anderson-localized optical modes
Authors:
Guillermo Arregui,
Ryan Cecil Ng,
Marcus Albrechtsen,
Søren Stobbe,
Clivia Marfa Sotomayor Torres,
Pedro David García
Abstract:
Confining photons in cavities enhances the interactions between light and matter. In cavity optomechanics, this enables a wealth of phenomena ranging from optomechanically induced transparency to macroscopic objects cooled to their motional ground state. Previous work in cavity optomechanics employed devices where ubiquitous structural disorder played no role beyond perturbing resonance frequencie…
▽ More
Confining photons in cavities enhances the interactions between light and matter. In cavity optomechanics, this enables a wealth of phenomena ranging from optomechanically induced transparency to macroscopic objects cooled to their motional ground state. Previous work in cavity optomechanics employed devices where ubiquitous structural disorder played no role beyond perturbing resonance frequencies and quality factors. More generally, the interplay between disorder, which must be described by statistical physics, and optomechanical effects has thus far been unexplored. Here, we demonstrate how sidewall roughness in air-slot photonic-crystal waveguides can induce sufficiently strong backscattering of slot-guided light to create Anderson-localized modes with quality factors as high as half a million and mode volumes that are below the diffraction limit. We observe how the interaction between these disorder-induced optical modes and in-plane mechanical modes of the slotted membrane is governed by a distribution of coupling rates, which can exceed $g_{\text{o}}/2π\sim 200$ kHz, leading to mechanical amplification up to self sustained oscillations via optomechanical backaction. Our work constitutes the first steps towards understanding optomechanics in the multiple-scattering regime and opens new perspectives for exploring complex systems with multitude mutually-coupled degrees of freedom.
△ Less
Submitted 1 April, 2022; v1 submitted 21 October, 2021;
originally announced October 2021.
-
A Turbulent Heating Model Combining Diffusion and Advection Effects for Giant Planet Magnetospheres
Authors:
C. S. Ng,
B. R. Neupane,
P. A. Delamere,
P. A. Damiano
Abstract:
The ion temperature of the magnetospheres of Jupiter and Saturn was observed to increase substantially from about 10 to 30 planet radii. Different heating mechanisms have been proposed to explain such observations, including a heating model for Jupiter based on MHD turbulence with flux-tube diffusion. More recently, an MHD turbulent heating model based on advection was shown to also explain the te…
▽ More
The ion temperature of the magnetospheres of Jupiter and Saturn was observed to increase substantially from about 10 to 30 planet radii. Different heating mechanisms have been proposed to explain such observations, including a heating model for Jupiter based on MHD turbulence with flux-tube diffusion. More recently, an MHD turbulent heating model based on advection was shown to also explain the temperature increase at Jupiter and Saturn. We further develop this turbulent heating model by combining effects from both diffusion and advection. The combined model resolves the physical consistency requirement that diffusion should dominate over advection when the radial flow velocity is small and vice versa when it is large. Comparisons with observations show that previous agreements, using the advection only model, are still valid for larger radial distance. Moreover, the additional heating by diffusion results in a better agreement with the temperature observations for smaller radial distance.
△ Less
Submitted 17 October, 2021;
originally announced October 2021.
-
Simulations of Future Particle Accelerators: Issues and Mitigations
Authors:
D. Sagan,
M. Berz,
N. M. Cook,
Y. Hao,
G. Hoffstaetter,
A. Huebl,
C. -K. Huang,
M. H. Langston,
C. E. Mayes,
C. E. Mitchell,
C. -K. Ng,
J. Qiang,
R. D. Ryne,
A. Scheinker,
E. Stern,
J. -L. Vay,
D. Winklehner,
H. Zhang
Abstract:
The ever increasing demands placed upon machine performance have resulted in the need for more comprehensive particle accelerator modeling. Computer simulations are key to the success of particle accelerators. Many aspects of particle accelerators rely on computer modeling at some point, sometimes requiring complex simulation tools and massively parallel supercomputing. Examples include the modeli…
▽ More
The ever increasing demands placed upon machine performance have resulted in the need for more comprehensive particle accelerator modeling. Computer simulations are key to the success of particle accelerators. Many aspects of particle accelerators rely on computer modeling at some point, sometimes requiring complex simulation tools and massively parallel supercomputing. Examples include the modeling of beams at extreme intensities and densities (toward the quantum degeneracy limit), and with ultra-fine control (down to the level of individual particles). In the future, adaptively tuned models might also be relied upon to provide beam measurements beyond the resolution of existing diagnostics. Much time and effort has been put into creating accelerator software tools, some of which are highly successful. However, there are also shortcomings such as the general inability of existing software to be easily modified to meet changing simulation needs. In this paper possible mitigating strategies are discussed for issues faced by the accelerator community as it endeavors to produce better and more comprehensive modeling tools. This includes lack of coordination between code developers, lack of standards to make codes portable and/or reusable, lack of documentation, among others.
△ Less
Submitted 24 August, 2021;
originally announced August 2021.
-
Design of a Robust Fiber Optic Communications System for Future IceCube Detectors
Authors:
Robert Halliday,
Tyce DeYoung,
Chris Ng,
Darren Grant,
Brian Ferguson,
Dean Shooltz
Abstract:
In this work we discuss ongoing development of a hybrid fiber/copper data and timing infrastructure for the future IceCube-Gen2 detector. The IceCube Neutrino Observatory is a kilometer-scale detector operating with 86 strings of modules. These modules communicate utilizing a custom protocol to mitigate the signaling challenges of long distance copper cables. Moving past the limitations of a coppe…
▽ More
In this work we discuss ongoing development of a hybrid fiber/copper data and timing infrastructure for the future IceCube-Gen2 detector. The IceCube Neutrino Observatory is a kilometer-scale detector operating with 86 strings of modules. These modules communicate utilizing a custom protocol to mitigate the signaling challenges of long distance copper cables. Moving past the limitations of a copper-based backbone will allow larger future IceCube detectors with extremely precise timing and a large margin of excess throughput to accommodate innovative future modules. To this end, the upcoming IceCube Upgrade offers an opportunity to deploy a pathfinder for the new fiber optic infrastructure, called the Fiber Test System. This design draws on experience from AMANDA and IceCube and incorporates recently matured technologies such as ruggedized fibers and White Rabbit timing to deliver robust and high-performance data and timing transfer.
△ Less
Submitted 23 July, 2021;
originally announced July 2021.
-
Strong alignment of prolate ellipsoids in Taylor-Couette flow
Authors:
Martin P. A. Assen,
Chong Shen Ng,
Jelle B. Will,
Richard J. A. M. Stevens,
Detlef Lohse,
Roberto Verzicco
Abstract:
We report on the mobility and orientation of finite-size, neutrally buoyant prolate ellipsoids (of aspect ratio $Λ=4$) in Taylor-Couette flow, using interface resolved numerical simulations. The setup consists of a particle-laden flow in between a rotating inner and a stationary outer cylinder. We simulate two particle sizes $\ell/d=0.1$ and $\ell/d=0.2$, $\ell$ denoting the particle major axis an…
▽ More
We report on the mobility and orientation of finite-size, neutrally buoyant prolate ellipsoids (of aspect ratio $Λ=4$) in Taylor-Couette flow, using interface resolved numerical simulations. The setup consists of a particle-laden flow in between a rotating inner and a stationary outer cylinder. We simulate two particle sizes $\ell/d=0.1$ and $\ell/d=0.2$, $\ell$ denoting the particle major axis and $d$ the gap-width between the cylinders. The volume fractions are $0.01\%$ and $0.07\%$, respectively. The particles, which are initially randomly positioned, ultimately display characteristic spatial distributions which can be categorised into four modes. Modes $(i)$ to $(iii)$ are observed in the Taylor vortex flow regime, while mode ($iv$) encompasses both the wavy vortex, and turbulent Taylor vortex flow regimes. Mode $(i)$ corresponds to stable orbits away from the vortex cores. Remarkably, in a narrow $\textit{Ta}$ range, particles get trapped in the Taylor vortex cores (mode ($ii$)). Mode $(iii)$ is the transition when both modes $(i)$ and $(ii)$ are observed. For mode $(iv)$, particles distribute throughout the domain due to flow instabilities. All four modes show characteristic orientational statistics. We find the particle clustering for mode ($ii$) to be size-dependent, with two main observations. Firstly, particle agglomeration at the core is much higher for $\ell/d=0.2$ compared to $\ell/d=0.1$. Secondly, the $\textit{Ta}$ range for which clustering is observed depends on the particle size. For this mode $(ii)$ we observe particles to align strongly with the local cylinder tangent. The most pronounced particle alignment is observed for $\ell/d=0.2$ around $\textit{Ta}=4.2\times10^5$. This observation is found to closely correspond to a minimum of axial vorticity at the Taylor vortex core ($\textit{Ta}=6\times10^5$) and we explain why.
△ Less
Submitted 10 June, 2021;
originally announced June 2021.
-
Transmitter IQ Skew Calibration using Direct Detection
Authors:
Wing Chau Ng,
Xuefeng Tang,
Zhuhong Zhang
Abstract:
We propose a transmitter skew calibration based on direct detection of coherent signals with estimation errors of +/-0.2ps, providing a reliable, accurate and low-cost scheme to calibrate skew for coherent transceivers.
In October 2019, this work was submitted / was exposed to Optical Fiber Communication Conference 2020 but an acceptance was not granted. We claimed the first time to use a direct…
▽ More
We propose a transmitter skew calibration based on direct detection of coherent signals with estimation errors of +/-0.2ps, providing a reliable, accurate and low-cost scheme to calibrate skew for coherent transceivers.
In October 2019, this work was submitted / was exposed to Optical Fiber Communication Conference 2020 but an acceptance was not granted. We claimed the first time to use a direct detection-based feedback method for coherent transmitter calibration.
△ Less
Submitted 1 June, 2021;
originally announced June 2021.
-
Enhancing Heat Transport in Multiphase Rayleigh-Bénard Turbulence by Changing the Plate-Liquid Contact Angles
Authors:
Hao-Ran Liu,
Kai Leong Chong,
Chong Shen Ng,
Roberto Verzicco,
Detlef Lohse
Abstract:
This numerical study presents a simple but extremely effective way to considerably enhance heat transport in turbulent multiphase flows, namely by using oleophilic walls. As a model system, we pick the
Rayleigh-Bénard setup, filled with an oil-water mixture. For oleophilic walls, e.g. using only $10\%$ volume fraction of oil in water, we observe a remarkable heat transport enhancement of more th…
▽ More
This numerical study presents a simple but extremely effective way to considerably enhance heat transport in turbulent multiphase flows, namely by using oleophilic walls. As a model system, we pick the
Rayleigh-Bénard setup, filled with an oil-water mixture. For oleophilic walls, e.g. using only $10\%$ volume fraction of oil in water, we observe a remarkable heat transport enhancement of more than $100\%$ as compared to the pure water case. In contrast, for oleophobic walls, the enhancement is then only about $20\%$ as compared to pure water. The physical explanation of the highly-efficient heat transport for oleophilic walls is that thermal plumes detach from the oil-rich boundary layer and are transported together with the oil phase. In the bulk, the oil-water interface prevents the plumes to mix with the turbulent water bulk. To confirm this physical picture, we show that the minimum amount of oil to achieve the maximum heat transport is set by the volume fraction of the thermal plumes. Our findings provide guidelines of how to optimize heat transport in thermal turbulence. Moreover, the physical insight of how coherent structures are coupled with one phase of a two-phase system has very general applicability for controlling transport properties in other turbulent multiphase flows.
△ Less
Submitted 23 May, 2022; v1 submitted 24 May, 2021;
originally announced May 2021.
-
Boundary layers in turbulent vertical convection at high Prandtl number
Authors:
Christopher J. Howland,
Chong Shen Ng,
Roberto Verzicco,
Detlef Lohse
Abstract:
Many environmental flows arise due to natural convection at a vertical surface, from flows in buildings to dissolving ice faces at marine-terminating glaciers. We use three-dimensional direct numerical simulations of a vertical channel with differentially heated walls to investigate such convective, turbulent boundary layers. Through the implementation of a multiple-resolution technique, we are ab…
▽ More
Many environmental flows arise due to natural convection at a vertical surface, from flows in buildings to dissolving ice faces at marine-terminating glaciers. We use three-dimensional direct numerical simulations of a vertical channel with differentially heated walls to investigate such convective, turbulent boundary layers. Through the implementation of a multiple-resolution technique, we are able to perform simulations at a wide range of Prandtl numbers $Pr$. This allows us to distinguish the parameter dependences of the horizontal heat flux and the boundary layer widths in terms of the Rayleigh number $Ra$ and Prandtl number $Pr$. For the considered parameter range $1\leq Pr \leq 100$, $10^6 \leq Ra \leq 10^9$, we find the flow to be consistent with a 'buoyancy-controlled' regime where the heat flux is independent of the wall separation. For given $Pr$, the heat flux is found to scale linearly with the friction velocity $V_\ast$. Finally, we discuss the implications of our results for the parameterisation of heat and salt fluxes at vertical ice-ocean interfaces.
△ Less
Submitted 30 August, 2021; v1 submitted 18 May, 2021;
originally announced May 2021.
-
An efficient phase-field method for turbulent multiphase flows
Authors:
Hao-Ran Liu,
Chong Shen Ng,
Kai Leong Chong,
Detlef Lohse,
Roberto Verzicco
Abstract:
With the aim of efficiently simulating three-dimensional multiphase turbulent flows with a phase-field method, we propose a new discretization scheme for the biharmonic term (the 4th-order derivative term) of the Cahn-Hilliard equation. This novel scheme can significantly reduce the computational cost while retaining the same accuracy as the original procedure. Our phase-field method is built on t…
▽ More
With the aim of efficiently simulating three-dimensional multiphase turbulent flows with a phase-field method, we propose a new discretization scheme for the biharmonic term (the 4th-order derivative term) of the Cahn-Hilliard equation. This novel scheme can significantly reduce the computational cost while retaining the same accuracy as the original procedure. Our phase-field method is built on top of a direct numerical simulation solver, named AFiD (www.afid.eu) and open-sourced by our research group. It relies on a pencil distributed parallel strategy and a FFT-based Poisson solver. To deal with large density ratios between the two phases, a pressure split method [1] has been applied to the Poisson solver. To further reduce computational costs, we implement a multiple-resolution algorithm which decouples the discretizations for the Navier-Stokes equations and the scalar equation: while a stretched wall-resolving grid is used for the Navier-Stokes equations, for the Cahn-Hilliard equation we use a fine uniform mesh. The present method shows excellent computational performance for large-scale computation: on meshes up to 8 billion nodes and 3072 CPU cores, a multiphase flow needs only slightly less than 1.5 times the CPU time of the single-phase flow solver on the same grid. The present method is validated by comparing the results to previous studies for the cases of drop deformation in shear flow, including the convergence test with mesh refinement, and breakup of a rising buoyant bubble with density ratio up to 1000. Finally, we simulate the breakup of a big drop and the coalescence of O(10^3) drops in turbulent Rayleigh-Bénard convection at a Rayleigh number of $10^8$, observing good agreement with theoretical results.
△ Less
Submitted 5 May, 2021;
originally announced May 2021.
-
Optimal ventilation rate for effective displacement ventilation
Authors:
Rui Yang,
Chong Shen Ng,
Kai Leong Chong,
Roberto Verzicco,
Detlef Lohse
Abstract:
Indoor ventilation is essential for a healthy and comfortable living environment. A key issue is to discharge anthropogenic air contamination such as CO2 gas or, more seriously, airborne respiratory droplets. Here, by employing direct numerical simulations, we study the mechanical displacement ventilation with the realistic range of air changes per hour (ACH) from 1 to 10. For this ventilation sch…
▽ More
Indoor ventilation is essential for a healthy and comfortable living environment. A key issue is to discharge anthropogenic air contamination such as CO2 gas or, more seriously, airborne respiratory droplets. Here, by employing direct numerical simulations, we study the mechanical displacement ventilation with the realistic range of air changes per hour (ACH) from 1 to 10. For this ventilation scheme, a cool lower zone is established beneath the warm upper zone with the interface height h depending on ACH. For weak ventilation, we find the scalings relation of the interface height h ~ ACH^{3/5}, as suggested by Hunt & Linden (Build. Environ., vol. 34, 1999, pp. 707-720). Also, the CO2 concentration decreases with ACH within this regime. However, for too strong ventilation, the interface height h becomes insensitive to ACH, and the CO2 concentration remains unchanged. Our results are in contrast to the general belief that stronger flow is more helpful to remove contaminants. We work out the physical mechanism governing the transition between the low ACH and the high ACH regimes. It is determined by the relative strength of the kinetic energy from the inflow, potential energy from the stably-stratified layers, and energy loss due to drag. Our findings provide a physics-based guideline to optimize displacement ventilation.
△ Less
Submitted 7 April, 2021;
originally announced April 2021.
-
Pulseshape discrimination against low-energy Ar-39 beta decays in liquid argon with 4.5 tonne-years of DEAP-3600 data
Authors:
The DEAP Collaboration,
P. Adhikari,
R. Ajaj,
M. Alpízar-Venegas,
P. -A. Amaudruz,
D. J. Auty,
M. Batygov,
B. Beltran,
H. Benmansour,
C. E. Bina,
J. Bonatt,
W. Bonivento,
M. G. Boulay,
B. Broerman,
J. F. Bueno,
P. M. Burghardt,
A. Butcher,
M. Cadeddu,
B. Cai,
M. Cárdenas-Montes,
S. Cavuoti,
M. Chen,
Y. Chen,
B. T. Cleveland,
J. M. Corning
, et al. (104 additional authors not shown)
Abstract:
The DEAP-3600 detector searches for the scintillation signal from dark matter particles scattering on a 3.3 tonne liquid argon target. The largest background comes from $^{39}$Ar beta decays and is suppressed using pulseshape discrimination (PSD).
We use two types of PSD algorithm: the prompt-fraction, which considers the fraction of the scintillation signal in a narrow and a wide time window ar…
▽ More
The DEAP-3600 detector searches for the scintillation signal from dark matter particles scattering on a 3.3 tonne liquid argon target. The largest background comes from $^{39}$Ar beta decays and is suppressed using pulseshape discrimination (PSD).
We use two types of PSD algorithm: the prompt-fraction, which considers the fraction of the scintillation signal in a narrow and a wide time window around the event peak, and the log-likelihood-ratio, which compares the observed photon arrival times to a signal and a background model. We furthermore use two algorithms to determine the number of photons detected at a given time: (1) simply dividing the charge of each PMT pulse by the charge of a single photoelectron, and (2) a likelihood analysis that considers the probability to detect a certain number of photons at a given time, based on a model for the scintillation pulseshape and for afterpulsing in the light detectors.
The prompt-fraction performs approximately as well as the log-likelihood-ratio PSD algorithm if the photon detection times are not biased by detector effects. We explain this result using a model for the information carried by scintillation photons as a function of the time when they are detected.
△ Less
Submitted 6 April, 2021; v1 submitted 22 March, 2021;
originally announced March 2021.
-
Porting WarpX to GPU-accelerated platforms
Authors:
A. Myers,
A. Almgren,
L. D. Amorim,
J. Bell,
L. Fedeli,
L. Ge,
K. Gott,
D. P. Grote,
M. Hogan,
A. Huebl,
R. Jambunathan,
R. Lehe,
C. Ng,
M. Rowan,
O. Shapoval,
M. Thévenet,
J. -L. Vay,
H. Vincenti,
E. Yang,
N. Zaïm,
W. Zhang,
Y. Zhao,
E. Zoni
Abstract:
WarpX is a general purpose electromagnetic particle-in-cell code that was originally designed to run on many-core CPU architectures. We describe the strategy followed to allow WarpX to use the GPU-accelerated nodes on OLCF's Summit supercomputer, a strategy we believe will extend to the upcoming machines Frontier and Aurora. We summarize the challenges encountered, lessons learned, and give curren…
▽ More
WarpX is a general purpose electromagnetic particle-in-cell code that was originally designed to run on many-core CPU architectures. We describe the strategy followed to allow WarpX to use the GPU-accelerated nodes on OLCF's Summit supercomputer, a strategy we believe will extend to the upcoming machines Frontier and Aurora. We summarize the challenges encountered, lessons learned, and give current performance results on a series of relevant benchmark problems.
△ Less
Submitted 2 September, 2021; v1 submitted 28 January, 2021;
originally announced January 2021.
-
General Mechanism of Evolution Shared by Proteins and Words
Authors:
Li-Min Wang,
Hsing-Yi Lai,
Sun-Ting Tsai,
Chen Siang Ng,
Shan-Jyun Wu,
Meng-Xue Tsai,
Yi-Ching Su,
Daw-Wei Wang,
Tzay-Ming Hong
Abstract:
Complex systems, such as life and languages, are governed by principles of evolution. The analogy and comparison between biology and linguistics\cite{alphafold2, RoseTTAFold, lang_virus, cell language, faculty1, language of gene, Protein linguistics, dictionary, Grammar of pro_dom, complexity, genomics_nlp, InterPro, language modeling, Protein language modeling} provide a computational foundation…
▽ More
Complex systems, such as life and languages, are governed by principles of evolution. The analogy and comparison between biology and linguistics\cite{alphafold2, RoseTTAFold, lang_virus, cell language, faculty1, language of gene, Protein linguistics, dictionary, Grammar of pro_dom, complexity, genomics_nlp, InterPro, language modeling, Protein language modeling} provide a computational foundation for characterizing and analyzing protein sequences, human corpora, and their evolution. However, no general mathematical formula has been proposed so far to illuminate the origin of quantitative hallmarks shared by life and language. Here we show several new statistical relationships shared by proteins and words, which inspire us to establish a general mechanism of evolution with explicit formulations that can incorporate both old and new characteristics. We found natural selection can be quantified via the entropic formulation by the principle of least effort to determine the sequence variation that survives in evolution. Besides, the origin of power law behavior and how changes in the environment stimulate the emergence of new proteins and words can also be explained via the introduction of function connection network. Our results demonstrate not only the correspondence between genetics and linguistics over their different hierarchies but also new fundamental physical properties for the evolution of complex adaptive systems. We anticipate our statistical tests can function as quantitative criteria to examine whether an evolution theory of sequence is consistent with the regularity of real data. In the meantime, their correspondence broadens the bridge to exchange existing knowledge, spurs new interpretations, and opens Pandora's box to release several potentially revolutionary challenges. For example, does linguistic arbitrariness conflict with the dogma that structure determines function?
△ Less
Submitted 16 December, 2022; v1 submitted 28 December, 2020;
originally announced December 2020.
-
Growth of respiratory droplets in cold and humid air
Authors:
Chong Shen Ng,
Kai Leong Chong,
Rui Yang,
Mogeng Li,
Roberto Verzicco,
Detlef Lohse
Abstract:
The ambient conditions surrounding liquid droplets determine their growth or shrinkage. However, the precise fate of a liquid droplet expelled from a respiratory puff as dictated by its surroundings and the puff itself has not yet been fully quantified. From the view of airborne disease transmission, such as SARS-CoV-2, knowledge of such dependencies are critical. Here we employ direct numerical s…
▽ More
The ambient conditions surrounding liquid droplets determine their growth or shrinkage. However, the precise fate of a liquid droplet expelled from a respiratory puff as dictated by its surroundings and the puff itself has not yet been fully quantified. From the view of airborne disease transmission, such as SARS-CoV-2, knowledge of such dependencies are critical. Here we employ direct numerical simulations (DNS) of a turbulent respiratory vapour puff and account for the mass and temperature exchange with respiratory droplets and aerosols. In particular, we investigate how droplets respond to different ambient temperatures and relative humidity (RH) by tracking their Lagrangian statistics. We reveal and quantify that in cold and humid environments, as there the respiratory puff is supersaturated, expelled droplets can first experience significant growth, and only later followed by shrinkage, in contrast to the monotonic shrinkage of droplets as expected from the classical view by William F. Wells (1934). Indeed, cold and humid environments diminish the ability of air to hold water vapour, thus causing the respiratory vapour puff to super-saturate. Consequently, the super-saturated vapour field drives the growth of droplets that are caught and transported within the humid puff. To analytically predict the likelihood for droplet growth, we propose a model for the axial RH based on the assumption of a quasi-stationary jet. Our model correctly predicts super-saturated RH conditions and is in good quantitative agreement with our DNS. Our results culminate in a temperature-RH map that can be employed as an indicator for droplet growth or shrinkage.
△ Less
Submitted 3 November, 2020;
originally announced November 2020.
-
Strong geometry dependence of the Casimir force between interpenetrated rectangular gratings
Authors:
Mingkang Wang,
L. Tang,
C. Y. Ng,
Riccardo Messina,
Brahim Guizal,
J. A. Crosse,
Mauro Antezza,
C. T. Chan,
H. B. Chan
Abstract:
Quantum fluctuations give rise to Casimir forces between two parallel conducting plates, the magnitude of which increases monotonically as the separation decreases. By introducing nanoscale gratings to the surfaces, recent advances have opened opportunities for controlling the Casimir force in complex geometries. Here, we measure the Casimir force between two rectangular gratings in regimes not ac…
▽ More
Quantum fluctuations give rise to Casimir forces between two parallel conducting plates, the magnitude of which increases monotonically as the separation decreases. By introducing nanoscale gratings to the surfaces, recent advances have opened opportunities for controlling the Casimir force in complex geometries. Here, we measure the Casimir force between two rectangular gratings in regimes not accessible before. Using an on-chip detection platform, we achieve accurate alignment between the two gratings so that they interpenetrate as the separation is reduced. Just before interpenetration occurs, the measured Casimir force is found to have a geometry dependence that is much stronger than previous experiments, with deviations from the proximity force approximation reaching a factor of ~500. After the gratings interpenetrate each other, the Casimir force becomes non-zero and independent of displacement. This work shows that the presence of gratings can strongly modify the Casimir force to control the interaction between nanomechanical components.
△ Less
Submitted 8 January, 2021; v1 submitted 4 September, 2020;
originally announced September 2020.
-
Extended lifetime of respiratory droplets in a turbulent vapour puff and its implications on airborne disease transmission
Authors:
Kai Leong Chong,
Chong Shen Ng,
Naoki Hori,
Rui Yang,
Roberto Verzicco,
Detlef Lohse
Abstract:
To quantify the fate of respiratory droplets under different ambient relative humidities, direct numerical simulations of a typical respiratory event are performed. We found that, because small droplets (with initial diameter of 10um) are swept by turbulent eddies in the expelled humid puff, their lifetime gets extended by a factor of more than 30 times as compared to what is suggested by the clas…
▽ More
To quantify the fate of respiratory droplets under different ambient relative humidities, direct numerical simulations of a typical respiratory event are performed. We found that, because small droplets (with initial diameter of 10um) are swept by turbulent eddies in the expelled humid puff, their lifetime gets extended by a factor of more than 30 times as compared to what is suggested by the classical picture by William F. Wells, for 50% relative humidity. With increasing ambient relative humidity the extension of the lifetimes of the small droplets further increases and goes up to around 150 times for 90% relative humidity, implying more than two meters advection range of the respiratory droplets within one second. Employing Lagrangian statistics, we demonstrate that the turbulent humid respiratory puff engulfs the small droplets, leading to many orders of magnitude increase in their lifetimes, implying that they can be transported much further during the respiratory events than the large ones. Our findings provide the starting points for larger parameter studies and may be instructive for develo** strategies on optimizing ventilation and indoor humidity control. Such strategies are key in mitigating the COVID-19 pandemic in the present autumn and upcoming winter.
△ Less
Submitted 3 February, 2021; v1 submitted 4 August, 2020;
originally announced August 2020.
-
Two-layer Thermally Driven Turbulence: Mechanisms for Interface Breakup
Authors:
Hao-Ran Liu,
Kai Leong Chong,
Qi Wang,
Chong Shen Ng,
Roberto Verzicco,
Detlef Lohse
Abstract:
It is commonly accepted that the breakup criteria of drops or bubbles in turbulence is governed by surface tension and inertia. However, also {\it{buoyancy}} can play an important role at breakup. In order to better understand this role, here we numerically study Rayleigh-Bénard convection for two immiscible fluid layers, in order to identify the effects of buoyancy on interface breakup. We explor…
▽ More
It is commonly accepted that the breakup criteria of drops or bubbles in turbulence is governed by surface tension and inertia. However, also {\it{buoyancy}} can play an important role at breakup. In order to better understand this role, here we numerically study Rayleigh-Bénard convection for two immiscible fluid layers, in order to identify the effects of buoyancy on interface breakup. We explore the parameter space spanned by the Weber number $5\leq We \leq 5000$ (the ratio of inertia to surface tension) and the density ratio between the two fluids $0.001 \leq Λ\leq 1$, at fixed Rayleigh number $Ra=10^8$ and Prandtl number $Pr=1$. At low $We$, the interface undulates due to plumes. When $We$ is larger than a critical value, the interface eventually breaks up. Depending on $Λ$, two breakup types are observed: The first type occurs at small $Λ\ll 1$ (e.g. air-water systems) when local filament thicknesses exceed the Hinze length scale. The second, strikingly different, type occurs at large $Λ$ with roughly $0.5 < Λ\le 1$ (e.g. oil-water systems): The layers undergo a periodic overturning caused by buoyancy overwhelming surface tension. For both types the breakup criteria can be derived from force balance arguments and show good agreement with the numerical results.
△ Less
Submitted 17 November, 2020; v1 submitted 12 May, 2020;
originally announced May 2020.
-
Effect of Dust Rotational Disruption by Radiative Torques and Implications for F-corona decrease revealed by the Parker Solar Probe
Authors:
Thiem Hoang,
Alex Lazarian,
Hyeseung Lee,
Kyungsuk Cho,
Pin-Gao Gu,
Chi-Hang Ng
Abstract:
The first-year results from the Parker Solar Probe (PSP) reveal a gradual decrease of F-coronal dust from distances of $D=0.166-0.336$ AU (or the inner elongations of $\sim 9.22- 18.69~R_{\odot}$) to the Sun (Howard et al. 2019). Such a F-corona decrease cannot be explained by the dust sublimation scenario of the popular silicate composition that implies a dust-free-zone of boundary at heliocentri…
▽ More
The first-year results from the Parker Solar Probe (PSP) reveal a gradual decrease of F-coronal dust from distances of $D=0.166-0.336$ AU (or the inner elongations of $\sim 9.22- 18.69~R_{\odot}$) to the Sun (Howard et al. 2019). Such a F-corona decrease cannot be explained by the dust sublimation scenario of the popular silicate composition that implies a dust-free-zone of boundary at heliocentric radius $R\lesssim 4-5R_{\odot}$, but may be explained by appealing to various dust compositions with different sublimation fronts. In this paper, we present an additional explanation for the F-corona decrease using our newly introduced mechanism of dust destruction so-called Radiative Torque Disruption (RATD) mechanism. We demonstrate that RATD rapidly breaks large grains into nanoparticles so that they can be efficiently destroyed by nonthermal sputtering induced by bombardment of energetic protons from slow solar winds, which extends the dust-free-zone established by thermal sublimation to $R_{dfz}\sim 8R_{\odot}$. Beyond this extended dust-free-zone, we find that the dust mass decreases gradually from $R\sim 42R_{\odot}$ toward the Sun due to partial removal of nanodust by nonthermal sputtering. The joint effect of RATD and nonthermal sputtering can successfully reproduce the gradual decrease of the F-corona between $19-9R_{\odot}$ observed by the PSP. Finally, the RATD mechanism can efficiently produce nanoparticles usually observed in the inner solar system.
△ Less
Submitted 6 July, 2021; v1 submitted 13 April, 2020;
originally announced April 2020.
-
The liquid-argon scintillation pulseshape in DEAP-3600
Authors:
The DEAP collaboration,
P. Adhikari,
R. Ajaj,
G. R. Araujoand M. Batygov,
B. Beltran,
C. E. Bina,
M. G. Boulay,
B. Broerman,
J. F. Bueno,
A. Butcher,
B. Cai,
M. Cárdenas-Montes,
S. Cavuoti,
Y. Chen,
B. T. Cleveland,
J. M. Corning,
S. J. Daughertyand K. Dering,
L. Doria,
F. A. Duncan andM. Dunford,
A. Erlandson,
N. Fatemighomi,
G. Fiorillo,
A. Flower,
R. J. Ford,
R. Gagnon
, et al. (76 additional authors not shown)
Abstract:
DEAP-3600 is a liquid-argon scintillation detector looking for dark matter. Scintillation events in the liquid argon (LAr) are registered by 255 photomultiplier tubes (PMTs), and pulseshape discrimination (PSD) is used to suppress electromagnetic background events. The excellent PSD performance of LAr makes it a viable target for dark matter searches, and the LAr scintillation pulseshape discussed…
▽ More
DEAP-3600 is a liquid-argon scintillation detector looking for dark matter. Scintillation events in the liquid argon (LAr) are registered by 255 photomultiplier tubes (PMTs), and pulseshape discrimination (PSD) is used to suppress electromagnetic background events. The excellent PSD performance of LAr makes it a viable target for dark matter searches, and the LAr scintillation pulseshape discussed here is the basis of PSD.
The observed pulseshape is a combination of LAr scintillation physics with detector effects. We present a model for the pulseshape of electromagnetic background events in the energy region of interest for dark matter searches. The model is composed of a) LAr scintillation physics, including the so-called intermediate component, b) the time response of the TPB wavelength shifter, including delayed TPB emission at $\mathcal O$(ms) time-scales, and c) PMT response.
TPB is the wavelength shifter of choice in most LAr detectors. We find that approximately 10\% of the intensity of the wavelength-shifted light is in a long-lived state of TPB. This causes light from an event to spill into subsequent events to an extent not usually accounted for in the design and data analysis of LAr-based detectors.
△ Less
Submitted 8 June, 2020; v1 submitted 27 January, 2020;
originally announced January 2020.
-
Convection-dominated dissolution for single and multiple immersed sessile droplets
Authors:
Kai Leong Chong,
Yanshen Li,
Chong Shen Ng,
Roberto Verzicco,
Detlef Lohse
Abstract:
We numerically investigate both single and multiple droplet dissolution with droplets consisting of lighter liquid dissolving in a denser host liquid. The significance of buoyancy is quantified by the Rayleigh number Ra which is the buoyancy force over the viscous dam** force. In this study, Ra spans almost four decades from 0.1 to 400. We focus on how the mass flux, characterized by the Sherwoo…
▽ More
We numerically investigate both single and multiple droplet dissolution with droplets consisting of lighter liquid dissolving in a denser host liquid. The significance of buoyancy is quantified by the Rayleigh number Ra which is the buoyancy force over the viscous dam** force. In this study, Ra spans almost four decades from 0.1 to 400. We focus on how the mass flux, characterized by the Sherwood number Sh, and the flow morphologies depend on Ra. For single droplet dissolution, we first show the transition of the Sh(Ra) scaling from a constant value to $Sh\sim Ra^{1/4}$, which confirms the experimental results by Dietrich et al. (J. Fluid Mech., vol. 794, 2016, pp. 45--67). The two distinct regimes, namely the diffusively- and the convectively-dominated regime, exhibit different flow morphologies: when Ra>=10, a buoyant plume is clearly visible which contrasts sharply to the pure diffusion case at low Ra. For multiple droplet dissolution, the well-known shielding effect comes into play at low Ra so that the dissolution rate is slower as compared to the single droplet case. However, at high Ra, convection becomes more and more dominant so that a collective plume enhances the mass flux, and remarkably the multiple droplets dissolve faster than a single droplet. This has also been found in the experiments by Laghezza et al. (Soft Matter, vol. 12, 2016, pp. 5787--5796). We explain this enhancement by the formation of a single, larger plume rather than several individual plumes. Moreover, there is an optimal Ra at which the enhancement is maximized, because the single plume is narrower at larger Ra, which thus hinders the enhancement. Our findings demonstrate a new mechanism in collective droplet dissolution, which is the merging of the plumes, that leads to non-trivial phenomena, contrasting the shielding effect.
△ Less
Submitted 29 November, 2019;
originally announced November 2019.
-
Non-universal transport mechanisms in vertical natural convection with dispersed light droplets
Authors:
Chong Shen Ng,
Vamsi Spandan,
Roberto Verzicco,
Detlef Lohse
Abstract:
We present results on the effect of dispersed droplets in vertical natural convection (VC) using direct numerical simulations based on a two-way fully coupled Euler-Lagrange approach with a liquid phase and a dispersed droplets phase. For increasing thermal driving, characterised by the Rayleigh number, $Ra$, of the two analysed droplet volume fractions, $α= 5\times10^{-3}$ and…
▽ More
We present results on the effect of dispersed droplets in vertical natural convection (VC) using direct numerical simulations based on a two-way fully coupled Euler-Lagrange approach with a liquid phase and a dispersed droplets phase. For increasing thermal driving, characterised by the Rayleigh number, $Ra$, of the two analysed droplet volume fractions, $α= 5\times10^{-3}$ and $α= 2\times 10^{-2}$, we find non-monotonic responses to the overall heat fluxes, characterised by the Nusselt number, $Nu$. The $Nu$ number is larger when the droplets are thermally coupled to the liquid. However, $Nu$ retains the effective scaling exponents that are close to the ${1/4}$-laminar VC scaling, suggesting that the heat transport is still modulated by thermal boundary layers. Local analyses reveal the non-monotonic trends of local heat fluxes and wall-shear stresses: Whilst regions of high heat fluxes are correlated to increased wall-shear stresses, the spatio-temporal distribution and magnitude of the increase is non-universal, implying that the overall heat transport is obscured by competing mechanisms. Most crucially, we find that the transport mechanisms inherently depend on the dominance of droplet driving to thermal driving that can quantified by (i) the bubblance parameter $b$, which measures the ratio of energy produced by the dispersed phase and the energy of the background turbulence, and (ii) $Ra_d/Ra$, where $Ra_d$ is the droplet Rayleigh number, which we introduce in this paper. When $b \lesssim O(10^{-1})$ and $Ra_d/Ra \lesssim O(100)$, the $Nu$ scaling is expected to recover to the VC scaling without droplets, and comparison with $b$ and $Ra_d/Ra$ from our data supports this notion.
△ Less
Submitted 19 November, 2019;
originally announced November 2019.
-
Kinetic Flux Ropes: Bernstein-Greene-Kruskal Modes for the Vlasov-Poisson-Ampère System
Authors:
C. S. Ng
Abstract:
Electrostatic structures have been observed in many regions of space plasmas, including the solar wind, the magnetosphere, the auroral acceleration region. One possible theoretical description of some of these structures is the concept of Bernstein-Greene-Kruskal (BGK) modes, which are exact nonlinear steady-state solutions of the Vlasov-Poisson system of equations in collisionless kinetic theory.…
▽ More
Electrostatic structures have been observed in many regions of space plasmas, including the solar wind, the magnetosphere, the auroral acceleration region. One possible theoretical description of some of these structures is the concept of Bernstein-Greene-Kruskal (BGK) modes, which are exact nonlinear steady-state solutions of the Vlasov-Poisson system of equations in collisionless kinetic theory. We generalize exact solutions of two-dimensional BGK modes in a magnetized plasma with finite magnetic field strength [Ng, Bhattacharjee, and Skiff, Phys. Plasmas {\bf13}, 055903 (2006)] to cases with azimuthal magnetic fields so that these structures carry electric current as well as steady electric and magnetic fields. Such nonlinear solutions now satisfy exactly the Vlasov-Poisson-Ampère system of equations. Explicit examples with either positive or negative electric potential structure are provided.
△ Less
Submitted 4 September, 2019;
originally announced September 2019.
-
Ab initio Study of Ground-State CS Photodissociation Via Highly Excited Electronic States
Authors:
Zhongxing Xu,
Nan Luo,
S. R. Federman,
William M. Jackson,
Cheuk-Yiu Ng,
Lee-** Wang,
Kyle N. Crabtree
Abstract:
Photodissociation by ultraviolet radiation is the key destruction pathway for CS in photon-dominated regions, such as diffuse clouds. However, the large uncertainties of photodissociation cross sections and rates of CS, resulting from a lack of both laboratory experiments and theoretical calculations, limit the accuracy of calculated abundances of S-bearing molecules by modern astrochemical models…
▽ More
Photodissociation by ultraviolet radiation is the key destruction pathway for CS in photon-dominated regions, such as diffuse clouds. However, the large uncertainties of photodissociation cross sections and rates of CS, resulting from a lack of both laboratory experiments and theoretical calculations, limit the accuracy of calculated abundances of S-bearing molecules by modern astrochemical models. Here we show a detailed \textit{ab initio} study of CS photodissociation. Accurate potential energy curves of CS electronic states were obtained by choosing an active space CAS(8,10) in MRCI+Q/aug-cc-pV(5+d)Z calculation with additional diffuse functions, with a focus on the \(B\) and \(C\,^1Σ^+\) states. Cross sections for both direct photodissociation and predissociation from the vibronic ground state were calculated by applying the coupled-channel method. We found that the \(C-X\) \((0-0)\) transition has extremely strong absorption due to a large transition dipole moment in the Franck-Condon region and the upper state is resonant with several triplet states via spin-orbit couplings, resulting in predissociation to the main atomic products C \((^3P)\) and S \((^1D)\). Our new calculations show the photodissociation rate under the standard interstellar radiation field is \(2.9\ee{-9}\)\,s\(^{-1}\), with a 57\% contribution from \(C-X\) \((0-0)\) transition. This value is larger than that adopted by the Leiden photodissociation and photoionization database by a factor of 3.0. Our accurate \textit{ab initio} calculations will allow more secure determination of S-bearing molecules in astrochemical models.
△ Less
Submitted 23 July, 2019;
originally announced July 2019.
-
Structural Color 3D Printing By Shrinking Photonic Crystals
Authors:
Ye**g Liu,
Hao Wang,
**fa Ho,
Ryan C. Ng,
Ray J. H. Ng,
Valerian H. Hall-Chen,
Eleen H. H. Koay,
Zhaogang Dong,
Hailong Liu,
Cheng-Wei Qiu,
Julia R. Greer,
Joel K. W. Yang
Abstract:
The rings, spots and stripes found on some butterflies, Pachyrhynchus weevils, and many chameleons are notable examples of natural organisms employing photonic crystals to produce colorful patterns. Despite advances in nanotechnology, we still lack the ability to print arbitrary colors and shapes in all three dimensions at this microscopic length scale. Commercial nanoscale 3D printers based on tw…
▽ More
The rings, spots and stripes found on some butterflies, Pachyrhynchus weevils, and many chameleons are notable examples of natural organisms employing photonic crystals to produce colorful patterns. Despite advances in nanotechnology, we still lack the ability to print arbitrary colors and shapes in all three dimensions at this microscopic length scale. Commercial nanoscale 3D printers based on two-photon polymerization are incapable of patterning photonic crystal structures with the requisite ~300 nm lattice constant to achieve photonic stopbands/ bandgaps in the visible spectrum and generate colors. Here, we introduce a means to produce 3D-printed photonic crystals with a 5x reduction in lattice constants (periodicity as small as 280 nm), achieving sub-100-nm features with a full range of colors. The reliability of this process enables us to engineer the bandstructures of woodpile photonic crystals that match experiments, showing that observed colors can be attributed to either slow light modes or stopbands. With these lattice structures as 3D color volumetric elements (voxels), we printed 3D microscopic scale objects, including the first multi-color microscopic model of the Eiffel Tower measuring only 39-microns tall with a color pixel size of 1.45 microns. The technology to print 3D structures in color at the microscopic scale promises the direct patterning and integration of spectrally selective devices, such as photonic crystal-based color filters, onto free-form optical elements and curved surfaces.
△ Less
Submitted 14 May, 2019;
originally announced May 2019.
-
Bulk scaling in wall-bounded and homogeneous vertical natural convection
Authors:
Chong Shen Ng,
Andrew Ooi,
Detlef Lohse,
Daniel Chung
Abstract:
Previous numerical studies on homogeneous Rayleigh-Bénard convection, which is Rayleigh-Bénard convection (RBC) without walls, and therefore without boundary layers, have revealed a scaling regime that is consistent with theoretical predictions of bulk-dominated thermal convection. In this so-called asymptotic regime, previous studies have predicted that the Nusselt number ($Nu$) and the Reynolds…
▽ More
Previous numerical studies on homogeneous Rayleigh-Bénard convection, which is Rayleigh-Bénard convection (RBC) without walls, and therefore without boundary layers, have revealed a scaling regime that is consistent with theoretical predictions of bulk-dominated thermal convection. In this so-called asymptotic regime, previous studies have predicted that the Nusselt number ($Nu$) and the Reynolds number ($Re$) vary with the Rayleigh number ($Ra$) according to $Nu\sim Ra^{1/2}$ and $Re\sim Ra^{1/2}$ at small Prandtl number ($Pr$). In this study, we consider a flow that is similar to RBC but with the direction of temperature gradient perpendicular to gravity instead of parallel; we refer to this configuration as vertical natural convection (VC). Since the direction of the temperature gradient is different in VC, there is no exact relation for the average kinetic dissipation rate, which makes it necessary to explore alternative definitions for $Nu$, $Re$ and $Ra$ and to find physical arguments for closure, rather than making use of the exact relation between $Nu$ and the dissipation rates as in RBC. Once we remove the walls from VC to obtain the homogeneous setup, we find that the aforementioned $1/2$-power-law scaling is present, similar to the case of homogeneous RBC. When focussing on the bulk, we find that the Nusselt and Reynolds numbers in the bulk of VC too exhibit the $1/2$-power-law scaling. These results suggest that the $1/2$-power-law scaling may even be found at lower Rayleigh numbers if the appropriate quantities in the turbulent bulk flow are employed for the definitions of $Ra$, $Re$ and $Nu$. From a stability perspective, at low- to moderate-$Ra$, we find that the time-evolution of the Nusselt number for homogenous vertical natural convection is unsteady, which is consistent with the nature of the elevator modes reported in previous studies on homogeneous RBC.
△ Less
Submitted 21 June, 2018;
originally announced June 2018.