-
Characterization of a SiPM-based monolithic neutron scatter camera using dark counts
Authors:
J. Balajthy,
J. Brown,
E. Brubaker,
B. Cabrera-Palmer,
J. Cates,
B. L. Goldblum,
M. Folsom,
P. Hausladen,
K. Keefe,
J. Nattress,
V. Negut,
K. Nishimura,
J. Steele,
K. Ziock
Abstract:
We report on the design and characterization of a prototype monolithic neutron scatter camera that is intended to significantly improve upon the geometrical shortcomings of conventional neutron cameras. The detector consists of a 50 mm $\times$ 56 mm $\times$ 60 mm monolithic block of EJ-204 plastic scintillator instrumented on two faces with arrays of 64 Hamamatsu S13360-6075PE silicon photomulti…
▽ More
We report on the design and characterization of a prototype monolithic neutron scatter camera that is intended to significantly improve upon the geometrical shortcomings of conventional neutron cameras. The detector consists of a 50 mm $\times$ 56 mm $\times$ 60 mm monolithic block of EJ-204 plastic scintillator instrumented on two faces with arrays of 64 Hamamatsu S13360-6075PE silicon photomultipliers (SiPMs). The electronic crosstalk is limited to < 5% between adjacent channels and < 0.1% between all other channel pairs. SiPMs introduce a significantly elevated dark count rate over PMTs, as well as correlated noise from after-pulsing and optical crosstalk. In this article, we characterize the dark count rate and optical crosstalk and present a modified event reconstruction likelihood function that accounts for them. We find that the average dark count rate per SiPM is 4.3 MHz with a standard deviation of 1.5 MHz among devices. The analysis method we employ to measure internal optical crosstalk also naturally yields the mean and width of the single-electron pulse height. We calculate separate contributions to the width of the single-electron pulse-height from electronic noise and avalanche fluctuations. We demonstrate a timing resolution for a single-photon pulse to be 128 ($\pm$4) ps. Finally, coincidence analysis is employed to measure external (pixel-to-pixel) optical crosstalk. We present a map of the average external crosstalk probability between 2-by-4 groups of SiPMs, as well as the in-situ timing characteristics extracted from the coincidence analysis. Further work is needed to characterize the performance of the camera at reconstructing single- and double-site interactions, as well as image reconstruction.
△ Less
Submitted 29 February, 2024; v1 submitted 26 September, 2023;
originally announced September 2023.
-
Networked Sensing for Radiation Detection, Localization, and Tracking
Authors:
R. J. Cooper,
N. Abgrall,
G. Aversano,
M. S. Bandstra,
D. Hellfeld,
T. H. Joshi,
V. Negut,
B. J. Quiter,
E. Rofors,
M. Salathe,
K. Vetter,
P. Beckman,
C. Catlett,
N. Ferrier,
Y. Kim,
R. Sankaran,
S. Shahkarami,
S. Amitkumar,
E. Ayton,
J. Kim,
S. Volkova
Abstract:
The detection, identification, and localization of illicit radiological and nuclear material continue to be key components of nuclear non-proliferation and nuclear security efforts around the world. Networks of radiation detectors deployed at strategic locations in urban environments have the potential to provide continuous radiological/nuclear (R/N) surveillance and provide high probabilities of…
▽ More
The detection, identification, and localization of illicit radiological and nuclear material continue to be key components of nuclear non-proliferation and nuclear security efforts around the world. Networks of radiation detectors deployed at strategic locations in urban environments have the potential to provide continuous radiological/nuclear (R/N) surveillance and provide high probabilities of intercepting threat sources. The integration of contextual information from sensors such as video, Lidar, and meteorological sensors can provide significantly enhanced situational awareness, and improved detection and localization performance through the fusion of the radiological and contextual data. In this work, we present details of our work to establish a city-scale multi-sensor network testbed for intelligent, adaptive R/N detection in urban environments, and develop new techniques that enable city-scale source detection, localization, and tracking.
△ Less
Submitted 25 July, 2023;
originally announced July 2023.
-
In-situ quantification of gamma-ray and beta-only emitting radionuclides
Authors:
Kai Vetter,
Donald Gunter,
Paul Luke,
Victor Negut,
Ryan Pavlovsky,
Brian Plimley,
Joanna Szornel
Abstract:
The prompt and in-situ assessment of non-gamma ray emitting radionuclides such as Sr-90 remains an outstanding challenge, particularly in radiological emergency response and consequence management situations. We have developed a new concept to quantitatively assess a wide range of radionuclides, including beta-only emitters, using coplanar-grid CdZnTe detectors that provide depth-of-interaction se…
▽ More
The prompt and in-situ assessment of non-gamma ray emitting radionuclides such as Sr-90 remains an outstanding challenge, particularly in radiological emergency response and consequence management situations. We have developed a new concept to quantitatively assess a wide range of radionuclides, including beta-only emitters, using coplanar-grid CdZnTe detectors that provide depth-of-interaction sensing. By combining measurements with and without an electron absorber, we demonstrate the feasibility of detecting and identifying Sr-90 and other radionuclides with a sensitivity of about 1 $μ$Ci/m$^2$ or 3.7x10$^4$ Bq/m$^2$, which is 10\% of the Derived Response Level, in less than 60 minutes. The new compact instrument can be used in the field or mobile laboratories to quickly assess a wide range of samples with sufficient sensitivity and specificity to provide critical guidance in the response after radiological incidents.
△ Less
Submitted 9 April, 2023;
originally announced April 2023.
-
Background and Anomaly Learning Methods for Static Gamma-ray Detectors
Authors:
M. S. Bandstra,
N. Abgrall,
R. J. Cooper,
D. Hellfeld,
T. H. Y. Joshi,
V. Negut,
B. J. Quiter,
M. Salathe,
R. Sankaran,
Y. Kim,
S. Shahkarami
Abstract:
Static gamma-ray detector systems that are deployed outdoors for radiological monitoring purposes experience time- and spatially-varying natural backgrounds and encounters with man-made nuisance sources. In order to be sensitive to illicit sources, such systems must be able to distinguish those sources from benign variations due to, e.g., weather and human activity. In addition to fluctuations due…
▽ More
Static gamma-ray detector systems that are deployed outdoors for radiological monitoring purposes experience time- and spatially-varying natural backgrounds and encounters with man-made nuisance sources. In order to be sensitive to illicit sources, such systems must be able to distinguish those sources from benign variations due to, e.g., weather and human activity. In addition to fluctuations due to non-threats, each detector has its own response and energy resolution, so providing a large network of detectors with predetermined background and source templates can be an onerous task. Instead, we propose that static detectors use simple physics-informed algorithms to automatically learn the background and nuisance source signatures, which can them be used to bootstrap and feed into more complex algorithms. Specifically, we show that non-negative matrix factorization (NMF) can be used to distinguish static background from the effects of increased concentrations of radon progeny due to rainfall. We also show that a simple process of using multiple gross count rate filters can be used in real time to classify or ``triage'' spectra according to whether they belong to static, rain, or anomalous categories for processing with other algorithms. If a rain sensor is available, we propose a method to incorporate that signal as well. Two clustering methods for anomalous spectra are proposed, one using Kullback-Leibler divergence and the other using regularized NMF, with the goal of finding clusters of similar spectral anomalies that can be used to build anomaly templates. Finally we describe the issues involved in the implementation of some of these algorithms on deployed sensor nodes, including the need to monitor the background models for long-term drifting due to physical changes in the environment or changes in detector performance.
△ Less
Submitted 7 September, 2023; v1 submitted 3 April, 2023;
originally announced April 2023.
-
Free-moving Quantitative Gamma-ray Imaging
Authors:
Daniel Hellfeld,
Mark S. Bandstra,
Jayson R. Vavrek,
Donald L. Gunter,
Joseph C. Curtis,
Marco Salathe,
Ryan Pavlovsky,
Victor Negut,
Paul J. Barton,
Joshua W. Cates,
Brian J. Quiter,
Reynold J. Cooper,
Kai Vetter,
Tenzing H. Y. Joshi
Abstract:
The ability to map and estimate the activity of radiological source distributions in unknown three-dimensional environments has applications in the prevention and response to radiological accidents or threats as well as the enforcement and verification of international nuclear non-proliferation agreements. Such a capability requires well-characterized detector response functions, accurate time-dep…
▽ More
The ability to map and estimate the activity of radiological source distributions in unknown three-dimensional environments has applications in the prevention and response to radiological accidents or threats as well as the enforcement and verification of international nuclear non-proliferation agreements. Such a capability requires well-characterized detector response functions, accurate time-dependent detector position and orientation data, a digitized representation of the surrounding 3D environment, and appropriate image reconstruction and uncertainty quantification methods. We have previously demonstrated 3D map** of gamma-ray emitters with free-moving detector systems on a relative intensity scale using a technique called Scene Data Fusion (SDF). Here we characterize the detector response of a multi-element gamma-ray imaging system using experimentally benchmarked Monte Carlo simulations and perform 3D map** on an absolute intensity scale. We present experimental reconstruction results from hand-carried and airborne measurements with point-like and distributed sources in known configurations, demonstrating quantitative SDF in complex 3D environments.
△ Less
Submitted 19 October, 2021; v1 submitted 8 July, 2021;
originally announced July 2021.
-
Improved Gamma-Ray Point Source Quantification in Three Dimensions by Modeling Attenuation in the Scene
Authors:
M. S. Bandstra,
D. Hellfeld,
J. R. Vavrek,
B. J. Quiter,
K. Meehan,
P. J. Barton,
J. W. Cates,
A. Moran,
V. Negut,
R. Pavlovsky,
T. H. Y. Joshi
Abstract:
Using a series of detector measurements taken at different locations to localize a source of radiation is a well-studied problem. The source of radiation is sometimes constrained to a single point-like source, in which case the location of the point source can be found using techniques such as maximum likelihood. Recent advancements have shown the ability to locate point sources in 2D and even 3D,…
▽ More
Using a series of detector measurements taken at different locations to localize a source of radiation is a well-studied problem. The source of radiation is sometimes constrained to a single point-like source, in which case the location of the point source can be found using techniques such as maximum likelihood. Recent advancements have shown the ability to locate point sources in 2D and even 3D, but few have studied the effect of intervening material on the problem. In this work we examine gamma-ray data taken from a freely moving system and develop voxelized 3-D models of the scene using data from the onboard LiDAR. Ray casting is used to compute the distance each gamma ray travels through the scene material, which is then used to calculate attenuation assuming a single attenuation coefficient for solids within the geometry. Parameter estimation using maximum likelihood is performed to simultaneously find the attenuation coefficient, source activity, and source position that best match the data. Using a simulation, we validate the ability of this method to reconstruct the true location and activity of a source, along with the true attenuation coefficient of the structure it is inside, and then we apply the method to measured data with sources and find good agreement.
△ Less
Submitted 4 October, 2021; v1 submitted 22 April, 2021;
originally announced April 2021.
-
Reconstructing the Position and Intensity of Multiple Gamma-Ray Point Sources with a Sparse Parametric Algorithm
Authors:
Jayson R. Vavrek,
Daniel Hellfeld,
Mark S. Bandstra,
Victor Negut,
Kathryn Meehan,
William J. Vanderlip,
Joshua W. Cates,
Ryan Pavlovsky,
Brian J. Quiter,
Reynold J. Cooper,
Tenzing H. Y. Joshi
Abstract:
We present an experimental demonstration of Additive Point Source Localization (APSL), a sparse parametric imaging algorithm that reconstructs the 3D positions and activities of multiple gamma-ray point sources. Using a handheld gamma-ray detector array and up to four $8$ $μ$Ci $^{137}$Cs gamma-ray sources, we performed both source-search and source-separation experiments in an indoor laboratory e…
▽ More
We present an experimental demonstration of Additive Point Source Localization (APSL), a sparse parametric imaging algorithm that reconstructs the 3D positions and activities of multiple gamma-ray point sources. Using a handheld gamma-ray detector array and up to four $8$ $μ$Ci $^{137}$Cs gamma-ray sources, we performed both source-search and source-separation experiments in an indoor laboratory environment. In the majority of the source-search measurements, APSL reconstructed the correct number of sources with position accuracies of ${\sim}20$ cm and activity accuracies (unsigned) of ${\sim}20\%$, given measurement times of two to three minutes and distances of closest approach (to any source) of ${\sim}20$ cm. In source-separation measurements where the detector could be moved freely about the environment, APSL was able to resolve two sources separated by $75$ cm or more given only ${\sim}60$ s of measurement time. In these source-separation measurements, APSL produced larger total activity errors of ${\sim}40\%$, but obtained source separation distances accurate to within $15$ cm. We also compare our APSL results against traditional Maximum Likelihood-Expectation Maximization (ML-EM) reconstructions, and demonstrate improved image accuracy and interpretability using APSL over ML-EM. These results indicate that APSL is capable of accurately reconstructing gamma-ray source positions and activities using measurements from existing detector hardware.
△ Less
Submitted 15 September, 2020;
originally announced September 2020.
-
3D Gamma-ray and Neutron Map** in Real-Time with the Localization and Map** Platform from Unmanned Aerial Systems and Man-Portable Configurations
Authors:
R. Pavlovsky,
J. W. Cates,
W. J. Vanderlip,
T. H. Y. Joshi,
A. Haefner,
E. Suzuki,
R. Barnowski,
V. Negut,
A. Moran,
K. Vetter,
B. J. Quiter
Abstract:
Nuclear Scene Data Fusion (SDF), implemented in the Localization and Map** Platform (LAMP) fuses three-dimensional (3D), real-time volumetric reconstructions of radiation sources with contextual information (e.g. LIDAR, camera, etc.) derived from the environment around the detector system. This information, particularly when obtained in real time, may be transformative for applications, includin…
▽ More
Nuclear Scene Data Fusion (SDF), implemented in the Localization and Map** Platform (LAMP) fuses three-dimensional (3D), real-time volumetric reconstructions of radiation sources with contextual information (e.g. LIDAR, camera, etc.) derived from the environment around the detector system. This information, particularly when obtained in real time, may be transformative for applications, including directed search for lost or stolen sources, consequence management after the release of radioactive materials, or contamination avoidance in security-related or emergency response scenarios. 3D reconstructions enabled by SDF localize contamination or hotspots to specific areas or objects, providing higher resolution over larger areas than conventional 2D approaches, and enabling more efficient planning and response, particularly in complex 3D environments.
In this work, we present the expansion of these gamma-ray map** concepts to neutron source localization. Here we integrate LAMP with a custom $Cs_2LiLa(Br,Cl)_6:Ce$ (CLLBC) scintillator detector sensitive to both gamma-rays and neutrons, which we dub Neutron Gamma LAMP (NG-LAMP). NG-LAMP enables simultaneous neutron and gamma-ray map** with high resolution gamma-ray spectroscopy. We demonstrate the ability to detect and localize surrogate Special Nuclear Materials (SNM) in real-time and in 3D based on neutron signatures alone, which is critical for the detection of heavily shielded SNM, when gamma-ray signatures are attenuated. In this work, we show for the first time the ability to localize, in 3D and realtime, a neutron source in the presence of a strong gamma-ray source, simultaneous and spectroscopic localization of three gamma-ray sources and a neutron source, and finally the localization of a surrogate SNM source based on neutron signatures alone, where gamma-ray data are consistent with background.
△ Less
Submitted 16 August, 2019;
originally announced August 2019.
-
3-D Radiation Map** in Real-Time with the Localization and Map** Platform LAMP from Unmanned Aerial Systems and Man-Portable Configurations
Authors:
Ryan Pavlovsky,
Andrew Haefner,
Tenzing Joshi,
Victor Negut,
Keith McManus,
Erika Suzuki,
Ross Barnowski,
Kai Vetter
Abstract:
Real-time, meter-resolution gamma-ray map** is relevant in the detection and map** of radiological materials, and for applications ranging from nuclear decommissioning, waste management, and environmental remediation to homeland security, emergency response, and international safeguards. We present the Localization and Map** Platform (LAMP) as a modular, contextual and radiation detector sen…
▽ More
Real-time, meter-resolution gamma-ray map** is relevant in the detection and map** of radiological materials, and for applications ranging from nuclear decommissioning, waste management, and environmental remediation to homeland security, emergency response, and international safeguards. We present the Localization and Map** Platform (LAMP) as a modular, contextual and radiation detector sensor suite, which performs gamma-ray map** in three dimensions (3-D) and in real time, onboard an unmanned aerial vehicle (UAV) or in a man-portable configuration. The deployment of an unmanned aerial system (UAS) for gamma-ray map** can be advantageous, as the UAS provides a means of measuring large areas efficiently and improving accessibility to some environments, such as multi-story structures. In addition, it is possible to increase measurement robustness through autonomous navigation, and to reduce radiation exposure to users as a result of the remote measurement. LAMP enables meter-resolution gamma-ray map** through Scene Data Fusion (SDF) [1], a capability that fuses radiation and scene data via voxelized 3-D Maximum Likelihood Expectation Maximization (MLEM) to produce 3-D maps of radioactive source distributions in real-time. Results are computed onboard LAMP while it is flying on the UAV and streamed from the system to the user, who can view the 3-D map on a tablet in real-time. We present results that demonstrate the SDF concept, including a set of UAS flights where a 133Ba source is localized at a test site in Berkeley, CA and a handheld measurement in Fukushima Prefecture, Japan where the distribution of radiocesium(137,134Cs) released from the accident of the Fukushima Daiichi Nuclear Power Plant is mapped. The reconstruction parameters used for each measurement were identical, indicating that the same algorithm can be used for both point or distributed sources.
△ Less
Submitted 28 December, 2018;
originally announced January 2019.