-
Particle acceleration in solar flares with imaging-spectroscopy in soft X-rays
Authors:
Mitsuo Oka,
Amir Caspi,
Bin Chen,
Mark Cheung,
James Drake,
Dale Gary,
Lindsay Glesener,
Fan Guo,
Hantao Ji,
Xiaocan Li,
Takuma Nakamura,
Noriyuki Narukage,
Katharine Reeves,
Pascal Saint-Hilaire,
Taro Sakao,
Chengcai Shen,
Amy Winebarger,
Tom Woods
Abstract:
Particles are accelerated to very high, non-thermal energies during explosive energy-release phenomena in space, solar, and astrophysical plasma environments. In the case of solar flares, it has been established that magnetic reconnection plays an important role for releasing the magnetic energy, but it remains unclear if or how magnetic reconnection can further explain particle acceleration durin…
▽ More
Particles are accelerated to very high, non-thermal energies during explosive energy-release phenomena in space, solar, and astrophysical plasma environments. In the case of solar flares, it has been established that magnetic reconnection plays an important role for releasing the magnetic energy, but it remains unclear if or how magnetic reconnection can further explain particle acceleration during flares. Here we argue that the key issue is the lack of understanding of the precise context of particle acceleration but it can be overcome, in the near future, by performing imaging-spectroscopy in soft X-rays (SXRs). Such observations should be complemented by observations in other wavelengths such as extreme-ultraviolets (EUVs), microwaves, hard X-rays (HXRs), and gamma-rays. Also, numerical simulations will be crucial for further narrowing down the particle acceleration mechanism in the context revealed by the observations. Of all these efforts, imaging-spectroscopy in SXRs, if successfully applied to large limb flares, will be a milestone in our challenge of understanding electron acceleration in solar flares and beyond, i.e. the Plasma Universe.
△ Less
Submitted 7 June, 2023;
originally announced June 2023.
-
Study of Time Evolution of Thermal and Non-Thermal Emission from an M-Class Solar Flare
Authors:
Shunsaku Nagasawa,
Tomoko Kawate,
Noriyuki Narukage,
Tadayuki Takahashi,
Amir Caspi,
Thomas N. Woods
Abstract:
We conduct a wide-band X-ray spectral analysis in the energy range of 1.5-100 keV to study the time evolution of the M7.6 class flare of 2016 July 23, with the Miniature X-ray Solar Spectrometer (MinXSS) CubeSat and the Reuven Ramaty High Energy Solar Spectroscopic Imager (RHESSI) spacecraft. With the combination of MinXSS for soft X-rays and RHESSI for hard X-rays, a non-thermal component and thr…
▽ More
We conduct a wide-band X-ray spectral analysis in the energy range of 1.5-100 keV to study the time evolution of the M7.6 class flare of 2016 July 23, with the Miniature X-ray Solar Spectrometer (MinXSS) CubeSat and the Reuven Ramaty High Energy Solar Spectroscopic Imager (RHESSI) spacecraft. With the combination of MinXSS for soft X-rays and RHESSI for hard X-rays, a non-thermal component and three-temperature multi-thermal component -- "cool" ($T \approx$ 3 MK), "hot" ($T \approx$ 15 MK), and "super-hot" ($T \approx$ 30 MK) -- were measured simultaneously. In addition, we successfully obtained the spectral evolution of the multi-thermal and non-thermal components with a 10 s cadence, which corresponds to the Alfvén time scale in the solar corona. We find that the emission measures of the cool and hot thermal components are drastically increasing more than hundreds of times and the super-hot thermal component is gradually appearing after the peak of the non-thermal emission. We also study the microwave spectra obtained by the Nobeyama Radio Polarimeters (NoRP), and we find that there is continuous gyro-synchrotron emission from mildly relativistic non-thermal electrons. In addition, we conducted a differential emission measure (DEM) analysis by using Atmospheric Imaging Assembly (AIA) onboard the Solar Dynamics Observatory (SDO) and determine that the DEM of cool plasma increases within the flaring loop. We find that the cool and hot plasma components are associated with chromospheric evaporation. The super-hot plasma component could be explained by the thermalization of the non-thermal electrons trapped in the flaring loop.
△ Less
Submitted 28 May, 2022;
originally announced May 2022.
-
Use of a ray-tracing simulation to characterize ghost rays in the FOXSI rocket experiment
Authors:
J. C. Buitrago-Casas,
S. Christe,
L. Glesener,
S. Krucker,
B. Ramsey,
S. Bongiorno,
K. Kilaru,
P. S. Athiray,
N. Narukage,
S. Ishikawa,
G. Dalton,
S. Courtade S. Musset,
J. Vievering,
D. Ryan,
S. Bale
Abstract:
Imaging X-rays by direct focusing offers greater sensitivity and a higher dynamic range compared to techniques based on indirect imaging. The Focusing Optics X-ray Solar Imager (FOXSI) is a sounding rocket payload that uses seven sets of nested Wolter-I figured mirrors to observe the Sun in hard X-rays through direct focusing. Characterizing the performance of these optics is critical to optimize…
▽ More
Imaging X-rays by direct focusing offers greater sensitivity and a higher dynamic range compared to techniques based on indirect imaging. The Focusing Optics X-ray Solar Imager (FOXSI) is a sounding rocket payload that uses seven sets of nested Wolter-I figured mirrors to observe the Sun in hard X-rays through direct focusing. Characterizing the performance of these optics is critical to optimize their performance and to understand their resulting data. In this paper, we present a ray-tracing simulation we created and developed to study Wolter-I X-ray mirrors. We validated the accuracy of the ray-tracing simulation by modeling the FOXSI rocket optics. We found satisfactory agreements between the simulation predictions and laboratory data measured on the optics. We used the ray-tracing simulation to characterize a background pattern of singly reflected rays (i.e., ghost rays) generated by photons at certain incident angles reflecting on only one of a two-segment Wolter-I figure and still reaching the focal plane. We used the results of the ray-tracing simulation to understand, and to formulate a set of strategies that can be used to mitigate, the impact of ghost rays on the FOXSI optical modules. These strategies include the optimization of aperture plates placed at the entrance and exit of the smallest Wolter-I mirror used in FOXSI, a honeycomb type collimator, and a wedge absorber placed at the telescope aperture. The ray-tracing simulation proved to be a reliable set of tools to study Wolter-I X-ray optics. It can be used in many applications, including astrophysics, material sciences, and medical imaging.
△ Less
Submitted 12 October, 2020;
originally announced October 2020.
-
High-speed X-ray imaging spectroscopy system with Zynq SoC for solar observations
Authors:
Shin-nosuke Ishikawa,
Tadayuki Takahashi,
Shin Watanabe,
Noriyuki Narukage,
Satoshi Miyazaki,
Tadashi Orita,
Shin'ichiro Takeda,
Masaharu Nomahi,
Iwao Fujishiro,
Fumio Hodoshima
Abstract:
We have developed a system combining a back-illuminated Complementary-Metal-Oxide-Semiconductor (CMOS) imaging sensor and Xilinx Zynq System-on-Chip (SoC) device for a soft X-ray (0.5-10 keV) imaging spectroscopy observation of the Sun to investigate the dynamics of the solar corona. Because typical timescales of energy release phenomena in the corona span a few minutes at most, we aim to obtain t…
▽ More
We have developed a system combining a back-illuminated Complementary-Metal-Oxide-Semiconductor (CMOS) imaging sensor and Xilinx Zynq System-on-Chip (SoC) device for a soft X-ray (0.5-10 keV) imaging spectroscopy observation of the Sun to investigate the dynamics of the solar corona. Because typical timescales of energy release phenomena in the corona span a few minutes at most, we aim to obtain the corresponding energy spectra and derive the physical parameters, i.e., temperature and emission measure, every few tens of seconds or less for future solar X-ray observations. An X-ray photon-counting technique, with a frame rate of a few hundred frames per second or more, can achieve such results. We used the Zynq SoC device to achieve the requirements. Zynq contains an ARM processor core, which is also known as the Processing System (PS) part, and a Programmable Logic (PL) part in a single chip. We use the PL and PS to control the sensor and seamless recording of data to a storage system, respectively. We aim to use the system for the third flight of the Focusing Optics Solar X-ray Imager (FOXSI-3) sounding rocket experiment for the first photon-counting X-ray imaging and spectroscopy of the Sun.
△ Less
Submitted 12 November, 2017;
originally announced November 2017.
-
Ly-alpha polarimeter design for CLASP rocket experiment
Authors:
H. Watanabe,
N. Narukage,
M. Kubo,
R. Ishikawa,
T. Bando,
R. Kano,
S. Tsuneta,
K. Kobayashi,
K. Ichimoto,
J. Trujillo-Bueno
Abstract:
A sounding-rocket program called the Chromospheric Lyman-Alpha Spectro-Polarimeter (CLASP) is proposed to be launched in the summer of 2014. CLASP will observe the solar chromosphere in Ly-alpha (121.567 nm), aiming to detect the linear polarization signal produced by scattering processes and the Hanle effect for the first time. The polarimeter of CLASP consists of a rotating half-waveplate, a bea…
▽ More
A sounding-rocket program called the Chromospheric Lyman-Alpha Spectro-Polarimeter (CLASP) is proposed to be launched in the summer of 2014. CLASP will observe the solar chromosphere in Ly-alpha (121.567 nm), aiming to detect the linear polarization signal produced by scattering processes and the Hanle effect for the first time. The polarimeter of CLASP consists of a rotating half-waveplate, a beam splitter, and a polarization analyzer. Magnesium Fluoride (MgF2) is used for these optical components, because MgF2 exhibits birefringent property and high transparency at ultraviolet wavelength.
△ Less
Submitted 17 July, 2014;
originally announced July 2014.
