Showing 1–13 of 13 results for author: Nakayoshi, K

Scintillator ageing of the T2K near detectors from 2010 to 2021

Authors: The T2K Collaboration, K. Abe, N. Akhlaq, R. Akutsu, A. Ali, C. Alt, C. Andreopoulos, M. Antonova, S. Aoki, T. Arihara, Y. Asada, Y. Ashida, E. T. Atkin, S. Ban, M. Barbi, G. J. Barker, G. Barr, D. Barrow, M. Batkiewicz-Kwasniak, F. Bench, V. Berardi, L. Berns, S. Bhadra, A. Blanchet, A. Blondel , et al. (333 additional authors not shown)

Abstract: The T2K experiment widely uses plastic scintillator as a target for neutrino interactions and an active medium for the measurement of charged particles produced in neutrino interactions at its near detector complex. Over 10 years of operation the measured light yield recorded by the scintillator based subsystems has been observed to degrade by 0.9--2.2\% per year. Extrapolation of the degradation… ▽ More The T2K experiment widely uses plastic scintillator as a target for neutrino interactions and an active medium for the measurement of charged particles produced in neutrino interactions at its near detector complex. Over 10 years of operation the measured light yield recorded by the scintillator based subsystems has been observed to degrade by 0.9--2.2\% per year. Extrapolation of the degradation rate through to 2040 indicates the recorded light yield should remain above the lower threshold used by the current reconstruction algorithms for all subsystems. This will allow the near detectors to continue contributing to important physics measurements during the T2K-II and Hyper-Kamiokande eras. Additionally, work to disentangle the degradation of the plastic scintillator and wavelength shifting fibres shows that the reduction in light yield can be attributed to the ageing of the plastic scintillator. △ Less

Submitted 26 July, 2022; originally announced July 2022.

Comments: 29 pages, 18 figures. Prepared for submission to JINST

Supernova Model Discrimination with Hyper-Kamiokande

Authors: Hyper-Kamiokande Collaboration, :, K. Abe, P. Adrich, H. Aihara, R. Akutsu, I. Alekseev, A. Ali, F. Ameli, I. Anghel, L. H. V. Anthony, M. Antonova, A. Araya, Y. Asaoka, Y. Ashida, V. Aushev, F. Ballester, I. Bandac, M. Barbi, G. J. Barker, G. Barr, M. Batkiewicz-Kwasniak, M. Bellato, V. Berardi, M. Bergevin , et al. (478 additional authors not shown)

Abstract: Core-collapse supernovae are among the most magnificent events in the observable universe. They produce many of the chemical elements necessary for life to exist and their remnants -- neutron stars and black holes -- are interesting astrophysical objects in their own right. However, despite millennia of observations and almost a century of astrophysical study, the explosion mechanism of core-colla… ▽ More Core-collapse supernovae are among the most magnificent events in the observable universe. They produce many of the chemical elements necessary for life to exist and their remnants -- neutron stars and black holes -- are interesting astrophysical objects in their own right. However, despite millennia of observations and almost a century of astrophysical study, the explosion mechanism of core-collapse supernovae is not yet well understood. Hyper-Kamiokande is a next-generation neutrino detector that will be able to observe the neutrino flux from the next galactic core-collapse supernova in unprecedented detail. We focus on the first 500 ms of the neutrino burst, corresponding to the accretion phase, and use a newly-developed, high-precision supernova event generator to simulate Hyper-Kamiokande's response to five different supernova models. We show that Hyper-Kamiokande will be able to distinguish between these models with high accuracy for a supernova at a distance of up to 100 kpc. Once the next galactic supernova happens, this ability will be a powerful tool for guiding simulations towards a precise reproduction of the explosion mechanism observed in nature. △ Less

Submitted 20 July, 2021; v1 submitted 13 January, 2021; originally announced January 2021.

Comments: 21 pages, 7 figures. Article based on thesis published as arXiv:2002.01649. v2: added references and some explanations in response to reviewer comments

Journal ref: Astrophys.J. 916 (2021) 15

Study of scintillation light collection, production and propagation in a 4 tonne dual-phase LArTPC

Authors: B. Aimard, L. Aizawa, C. Alt, J. Asaadi, M. Auger, V. Aushev, D. Autiero, A. Balaceanu, G. Balik, L. Balleyguier, E. Bechetoille, D. Belver, A. M. Blebea-Apostu, S. Bolognesi, S. Bordoni, N. Bourgeois, B. Bourguille, J. Bremer, G. Brown, G. Brunetti, L. Brunetti, D. Caiulo, M. Calin, E. Calvo, M. Campanelli , et al. (138 additional authors not shown)

Abstract: The $3 \times 1 \times 1$ m$^3$ demonstrator is a dual phase liquid argon time projection chamber that has recorded cosmic rays events in 2017 at CERN. The light signal in these detectors is crucial to provide precise timing capabilities. The performances of the photon detection system, composed of five PMTs, are discussed. The collected scintillation and electroluminescence light created by passi… ▽ More The $3 \times 1 \times 1$ m$^3$ demonstrator is a dual phase liquid argon time projection chamber that has recorded cosmic rays events in 2017 at CERN. The light signal in these detectors is crucial to provide precise timing capabilities. The performances of the photon detection system, composed of five PMTs, are discussed. The collected scintillation and electroluminescence light created by passing particles has been studied in various detector conditions. In particular, the scintillation light production and propagation processes have been analyzed and compared to simulations, improving the understanding of some liquid argon properties. △ Less

Submitted 20 December, 2020; v1 submitted 16 October, 2020; originally announced October 2020.

Comments: 30 pages, 26 figures

The Hyper-Kamiokande Experiment -- Snowmass LOI

Authors: Hyper-Kamiokande Collaboration, :, K. Abe, P. Adrich, H. Aihara, R. Akutsu, I. Alekseev, A. Ali, F. Ameli, L. H. V. Anthony, A. Araya, Y. Asaoka, V. Aushev, I. Bandac, M. Barbi, G. Barr, M. Batkiewicz-Kwasniak, M. Bellato, V. Berardi, L. Bernard, E. Bernardini, L. Berns, S. Bhadra, J. Bian, A. Blanchet , et al. (366 additional authors not shown)

Abstract: Hyper-Kamiokande is the next generation underground water Cherenkov detector that builds on the highly successful Super-Kamiokande experiment. The detector which has an 8.4~times larger effective volume than its predecessor will be located along the T2K neutrino beamline and utilize an upgraded J-PARC beam with 2.6~times beam power. Hyper-K's low energy threshold combined with the very large fiduc… ▽ More Hyper-Kamiokande is the next generation underground water Cherenkov detector that builds on the highly successful Super-Kamiokande experiment. The detector which has an 8.4~times larger effective volume than its predecessor will be located along the T2K neutrino beamline and utilize an upgraded J-PARC beam with 2.6~times beam power. Hyper-K's low energy threshold combined with the very large fiducial volume make the detector unique, that is expected to acquire an unprecedented exposure of 3.8~Mton$\cdot$year over a period of 20~years of operation. Hyper-Kamiokande combines an extremely diverse science program including nucleon decays, long-baseline neutrino oscillations, atmospheric neutrinos, and neutrinos from astrophysical origins. The scientific scope of this program is highly complementary to liquid-argon detectors for example in sensitivity to nucleon decay channels or supernova detection modes. Hyper-Kamiokande construction has started in early 2020 and the experiment is expected to start operations in 2027. The Hyper-Kamiokande collaboration is presently being formed amongst groups from 19 countries including the United States, whose community has a long history of making significant contributions to the neutrino physics program in Japan. US physicists have played leading roles in the Kamiokande, Super-Kamiokande, EGADS, K2K, and T2K programs. △ Less

Submitted 1 September, 2020; originally announced September 2020.

Comments: 6 pages, prepared as Snowmass2021 LOI

J-PARC Neutrino Beamline Upgrade Technical Design Report

Authors: K. Abe, H. Aihara, A. Ajmi, C. Alt, C. Andreopoulos, M. Antonova, S. Aoki, Y. Asada, Y. Ashida, A. Atherton, E. Atkin, S. Ban, F. C. T. Barbato, M. Barbi, G. J. Barker, G. Barr, M. Batkiewicz, A. Beloshapkin, V. Berardi, L. Berns, S. Bhadra, J. Bian, S. Bienstock, A. Blondel, S. Bolognesi , et al. (360 additional authors not shown)

Abstract: In this document, technical details of the upgrade plan of the J-PARC neutrino beamline for the extension of the T2K experiment are described. T2K has proposed to accumulate data corresponding to $2\times{}10^{22}$ protons-on-target in the next decade, aiming at an initial observation of CP violation with $3σ$ or higher significance in the case of maximal CP violation. Methods to increase the neut… ▽ More In this document, technical details of the upgrade plan of the J-PARC neutrino beamline for the extension of the T2K experiment are described. T2K has proposed to accumulate data corresponding to $2\times{}10^{22}$ protons-on-target in the next decade, aiming at an initial observation of CP violation with $3σ$ or higher significance in the case of maximal CP violation. Methods to increase the neutrino beam intensity, which are necessary to achieve the proposed data increase, are described. △ Less

Submitted 14 August, 2019; originally announced August 2019.

Measurement of the $ν_μ$ charged-current cross sections on water, hydrocarbon, iron, and their ratios with the T2K on-axis detectors

Authors: K. Abe, R. Akutsu, A. Ali, C. Andreopoulos, L. Anthony, M. Antonova, S. Aoki, A. Ariga, Y. Ashida, Y. Awataguchi, Y. Azuma, S. Ban, M. Barbi, G. J. Barker, G. Barr, C. Barry, M. Batkiewicz-Kwasniak, F. Bench, V. Berardi, S. Berkman, R. M. Berner, L. Berns, S. Bhadra, S. Bienstock, A. Blondely , et al. (292 additional authors not shown)

Abstract: We report a measurement of the flux-integrated $ν_μ$ charged-current cross sections on water, hydrocarbon, and iron in the T2K on-axis neutrino beam with a mean neutrino energy of 1.5 GeV. The measured cross sections on water, hydrocarbon, and iron are $σ^{\rm{H_{2}O}}_{\rm{CC}}$ = (0.840$\pm 0.010$(stat.)$^{+0.10}_{-0.08}$(syst.))$\times$10$^{-38}$cm$^2$/nucleon, $σ^{\rm{CH}}_{\rm{CC}}$ = (0.817… ▽ More We report a measurement of the flux-integrated $ν_μ$ charged-current cross sections on water, hydrocarbon, and iron in the T2K on-axis neutrino beam with a mean neutrino energy of 1.5 GeV. The measured cross sections on water, hydrocarbon, and iron are $σ^{\rm{H_{2}O}}_{\rm{CC}}$ = (0.840$\pm 0.010$(stat.)$^{+0.10}_{-0.08}$(syst.))$\times$10$^{-38}$cm$^2$/nucleon, $σ^{\rm{CH}}_{\rm{CC}}$ = (0.817$\pm 0.007$(stat.)$^{+0.11}_{-0.08}$(syst.))$\times$10$^{-38}$cm$^2$/nucleon, and $σ^{\rm{Fe}}_{\rm{CC}}$ = (0.859$\pm 0.003$(stat.) $^{+0.12}_{-0.10}$(syst.))$\times$10$^{-38}$cm$^2$/nucleon respectively, for a restricted phase space of induced muons: $θ_μ<45^{\circ}$ and $p_μ>$0.4 GeV/$c$ in the laboratory frame. The measured cross section ratios are ${σ^{\rm{H_{2}O}}_{\rm{CC}}}/{σ^{\rm{CH}}_{\rm{CC}}}$ = 1.028$\pm 0.016$(stat.)$\pm 0.053$(syst.), ${σ^{\rm{Fe}}_{\rm{CC}}}/{σ^{\rm{H_{2}O}}_{\rm{CC}}}$ = 1.023$\pm 0.012$(stat.)$\pm 0.058$(syst.), and ${σ^{\rm{Fe}}_{\rm{CC}}}/{σ^{\rm{CH}}_{\rm{CC}}}$ = 1.049$\pm 0.010$(stat.)$\pm 0.043$(syst.). These results, with an unprecedented precision for the measurements of neutrino cross sections on water in the studied energy region, show good agreement with the current neutrino interaction models used in the T2K oscillation analyses. △ Less

Submitted 21 April, 2019; originally announced April 2019.

Journal ref: Prog Theor Exp Phys (2019)

T2K ND280 Upgrade -- Technical Design Report

Authors: K. Abe, H. Aihara, A. Ajmi, C. Andreopoulos, M. Antonova, S. Aoki, Y. Asada, Y. Ashida, A. Atherton, E. Atkin, D. Attié, S. Ban, M. Barbi, G. J. Barker, G. Barr, M. Batkiewicz, A. Beloshapkin, V. Berardi, L. Berns, S. Bhadra, J. Bian, S. Bienstock, A. Blondel, J. Boix, S. Bolognesi , et al. (359 additional authors not shown)

Abstract: In this document, we present the Technical Design Report of the Upgrade of the T2K Near Detector ND280. The goal of this upgrade is to improve the Near Detector performance to measure the neutrino interaction rate and to constrain the neutrino interaction cross-sections so that the uncertainty in the number of predicted events at Super-Kamiokande is reduced to about 4%. This will allow to improve… ▽ More In this document, we present the Technical Design Report of the Upgrade of the T2K Near Detector ND280. The goal of this upgrade is to improve the Near Detector performance to measure the neutrino interaction rate and to constrain the neutrino interaction cross-sections so that the uncertainty in the number of predicted events at Super-Kamiokande is reduced to about 4%. This will allow to improve the physics reach of the T2K-II project. This goal is achieved by modifying the upstream part of the detector, adding a new highly granular scintillator detector (Super-FGD), two new TPCs (High-Angle TPC) and six TOF planes. Details about the detector concepts, design and construction methods are presented, as well as a first look at the test-beam data taken in Summer 2018. An update of the physics studies is also presented. △ Less

Submitted 14 October, 2020; v1 submitted 11 January, 2019; originally announced January 2019.

Comments: 196 pages

Report number: CERN-SPSC-2019-001 (SPSC-TDR-006)

A 4 tonne demonstrator for large-scale dual-phase liquid argon time projection chambers

Authors: B. Aimard, Ch. Alt, J. Asaadi, M. Auger, V. Aushev, D. Autiero, M. M. Badoi, A. Balaceanu, G. Balik, L. Balleyguier, E. Bechetoille, D. Belver, A. M. Blebea-Apostu, S. Bolognesi, S. Bordoni, N. Bourgeois, B. Bourguille, J. Bremer, G. Brown, G. Brunetti, L. Brunetti, D. Caiulo, M. Calin, E. Calvo, M. Campanelli , et al. (147 additional authors not shown)

Abstract: A 10 kilo-tonne dual-phase liquid argon TPC is one of the detector options considered for the Deep Underground Neutrino Experiment (DUNE). The detector technology relies on amplification of the ionisation charge in ultra-pure argon vapour and oers several advantages compared to the traditional single-phase liquid argon TPCs. A 4.2 tonne dual-phase liquid argon TPC prototype, the largest of its kin… ▽ More A 10 kilo-tonne dual-phase liquid argon TPC is one of the detector options considered for the Deep Underground Neutrino Experiment (DUNE). The detector technology relies on amplification of the ionisation charge in ultra-pure argon vapour and oers several advantages compared to the traditional single-phase liquid argon TPCs. A 4.2 tonne dual-phase liquid argon TPC prototype, the largest of its kind, with an active volume of 3x1x1 $m^3$ has been constructed and operated at CERN. In this paper we describe in detail the experimental setup and detector components as well as report on the operation experience. We also present the first results on the achieved charge amplification, prompt scintillation and electroluminescence detection, and purity of the liquid argon from analyses of a collected sample of cosmic ray muons. △ Less

Submitted 19 October, 2018; v1 submitted 8 June, 2018; originally announced June 2018.

Proposal for an Extended Run of T2K to $20\times10^{21}$ POT

Authors: K. Abe, H. Aihara, A. Amji, J. Amey, C. Andreopoulos, M. Antonova, S. Aoki, A. Atherton, S. Ban, F. C. T. Barbato, M. Barbi, F. C. T. Barbato, G. J. Barker, G. Barr, P. Bartet-Friburg, M. Batkiewicz, V. Berardi, S. Bhadra, S. Bienstock, A. Blondel, S. Bolognesi, S. Bordoni, S. B. Boyd, D. Brailsford, A. Bravar , et al. (292 additional authors not shown)

Abstract: Recent measurements by the T2K neutrino oscillation experiment indicate that CP violation in neutrino mixing may be observed in the future by long-baseline neutrino oscillation experiments. We propose an extension to the currently approved T2K running from $7.8\times 10^{21}~\mbox{POT}$ to $20\times 10^{21}~\mbox{POT}$, aiming at initial observation of CP violation with 3$\,σ$ or higher significan… ▽ More Recent measurements by the T2K neutrino oscillation experiment indicate that CP violation in neutrino mixing may be observed in the future by long-baseline neutrino oscillation experiments. We propose an extension to the currently approved T2K running from $7.8\times 10^{21}~\mbox{POT}$ to $20\times 10^{21}~\mbox{POT}$, aiming at initial observation of CP violation with 3$\,σ$ or higher significance for the case of maximum CP violation. The program also contains a measurement of mixing parameters, $θ_{23}$ and $Δm^2_{32}$, with a precision of 1.7$^\circ$ or better and 1%, respectively. With accelerator and beamline upgrades, as well as analysis improvements, this program would occur before the next generation of long-baseline neutrino oscillation experiments that are expected to start operation in 2026. △ Less

Submitted 13 September, 2016; originally announced September 2016.

Comments: 68 pages, 31 figures

Development and operational experience of magnetic horn system for T2K experiment

Authors: T. Sekiguchi, K. Bessho, Y. Fujii, M. Hagiwara, T. Hasegawa, K. Hayashi, T. Ishida, T. Ishii, H. Kobayashi, T. Kobayashi, S. Koike, K. Koseki, T. Maruyama, H. Matsumoto, T. Nakadaira, K. Nakamura, K. Nakayoshi, K. Nishikawa, Y. Oyama, K. Sakashita, M. Shibata, Y. Suzuki, M. Tada, K. Takahashi, T. Tsukamoto , et al. (12 additional authors not shown)

Abstract: A magnetic horn system to be operated at a pulsed current of 320 kA and to survive high-power proton beam operation at 750 kW was developed for the T2K experiment. The first set of T2K magnetic horns was operated for over 12 million pulses during the four years of operation from 2010 to 2013, under a maximum beam power of 230 kW, and $6.63\times10^{20}$ protons were exposed to the production targe… ▽ More A magnetic horn system to be operated at a pulsed current of 320 kA and to survive high-power proton beam operation at 750 kW was developed for the T2K experiment. The first set of T2K magnetic horns was operated for over 12 million pulses during the four years of operation from 2010 to 2013, under a maximum beam power of 230 kW, and $6.63\times10^{20}$ protons were exposed to the production target. No significant damage was observed throughout this period. This successful operation of the T2K magnetic horns led to the discovery of the $ν_μ\rightarrowν_e$ oscillation phenomenon in 2013 by the T2K experiment. In this paper, details of the design, construction, and operation experience of the T2K magnetic horns are described. △ Less

Submitted 5 February, 2015; originally announced February 2015.

Comments: 22 pages, 40 figures, also submitted to Nuclear Instrument and Methods in Physics Research, A

Measurement of the muon beam direction and muon flux for the T2K neutrino experiment

Authors: K. Suzuki, S. Aoki, A. Ariga, T. Ariga, F. Bay, C. Bronner, A. Ereditato, M. Friend, M. Hartz, T. Hiraki, A. K. Ichikawa, T. Ishida, T. Ishii, F. Juget, T. Kikawa, T. Kobayashi, H. Kubo, K. Matsuoka, T. Maruyama, A. Minamino, A. Murakami, T. Nakadaira, T. Nakaya, K. Nakayoshi, Y. Oyama , et al. (8 additional authors not shown)

Abstract: The Tokai-to-Kamioka (T2K) neutrino experiment measures neutrino oscillations by using an almost pure muon neutrino beam produced at the J-PARC accelerator facility. The T2K muon monitor was installed to measure the direction and stability of the muon beam which is produced together with the muon neutrino beam. The systematic error in the muon beam direction measurement was estimated, using data a… ▽ More The Tokai-to-Kamioka (T2K) neutrino experiment measures neutrino oscillations by using an almost pure muon neutrino beam produced at the J-PARC accelerator facility. The T2K muon monitor was installed to measure the direction and stability of the muon beam which is produced together with the muon neutrino beam. The systematic error in the muon beam direction measurement was estimated, using data and MC simulation, to be 0.28 mrad. During beam operation, the proton beam has been controlled using measurements from the muon monitor and the direction of the neutrino beam has been tuned to within 0.3 mrad with respect to the designed beam-axis. In order to understand the muon beam properties,measurement of the absolute muon yield at the muon monitor was conducted with an emulsion detector. The number of muon tracks was measured to be $(4.06\pm0.05)\times10^4$ cm$^{-2}$ normalized with $4\times10^{11}$ protons on target with 250 kA horn operation. The result is in agreement with the prediction which is corrected based on hadron production data. △ Less

Submitted 30 November, 2014; originally announced December 2014.

Development of a pipeline CAMAC controller with PC/104-Plus single board computer

Authors: Y. Yasu, E. Inoue, H. Fujii, Y. Igarashi, M. Ikeno, M. Tanaka, K. Nakayoshi, H. Kodama, S. Harada, H. Kyoo

Abstract: A pipeline CAMAC controller with PC/104-Plus single board computer has been developed. The architecture of the pipeline CAMAC controller is completely different from that of traditional CAMAC controller. The pipeline CAMAC controller adopted truly pipelined command and data paths from/to computer memory to/from CAMAC. The pipeline method enabled the controller maximum speed of CAMAC, approximate… ▽ More A pipeline CAMAC controller with PC/104-Plus single board computer has been developed. The architecture of the pipeline CAMAC controller is completely different from that of traditional CAMAC controller. The pipeline CAMAC controller adopted truly pipelined command and data paths from/to computer memory to/from CAMAC. The pipeline method enabled the controller maximum speed of CAMAC, approximately up to 3 MB/sec with 24-bit data. The controller also has a DAQ function such as event numbering for co-existence with other equipment such as VME. Not only the functionality and the performance but also the pipeline architecture and the design concept are described. △ Less

Submitted 14 July, 2003; originally announced July 2003.

Comments: Paper for the 2003 Computing in High Energy and Nuclear Physics (CHEP03), La Jolla, Ca, USA, March 2003 (presented as poster). Format: PDF, 4 pages, 10 figures. PSN TUGP004

The Data Acquisition System Based on PMC Bus

Authors: Y. Igarashi, H. Fujii, T. Higuchi, M. Ikeno, E. Inoue, R. Itoh, H. Kodama, T. Murakami, Y. Nagasaka, M. Nakao, K. Nakayoshi, M. Saitoh, S. Shimazaki, S. Y. Suzuki, M. Tanaka, K. Tauchi, G. Varner, M. Yamauchi, Y. Yasu, T. Katayama, K. Watanabe, M. Ishizuka, S. Onozawa, C. J. Li

Abstract: High energy physics experiments in KEK/Japan rush into over KHz trigger stage. Thus, we need a successor of the data acquisition(DAQ) system that replaces the CAMAC or FASTBUS systems. To meet these needs, we have developed a DAQ system which includes a crate, base-board modules, daughter cards for front-end A/D or T/D conversion, and back-end communication cards for data transfer and timing con… ▽ More High energy physics experiments in KEK/Japan rush into over KHz trigger stage. Thus, we need a successor of the data acquisition(DAQ) system that replaces the CAMAC or FASTBUS systems. To meet these needs, we have developed a DAQ system which includes a crate, base-board modules, daughter cards for front-end A/D or T/D conversion, and back-end communication cards for data transfer and timing control. The size of the crate is for the 9U Euro-cards with the standard VME32 bus and extension connectors for power supply. The base-board comprises of a local bus with the sequencer connected to the front-end daughter cards via event buffering FIFOs, and the standard PMC (PCI mezzanine card) bus to be set a PMC processor unit to reduce data size from the front-end daughter cards. A data transfer module, which is connected to the event building system, and a trigger control unit, which communicates with the central timing controller are installed on the back-end communication card connected to the rear end of the base-board. We describe the design of this DAQ system and evaluate the performance of it. △ Less

Submitted 30 May, 2003; originally announced May 2003.