-
Measurement of Pressure Gradients near the Interface in the Viscous Fingering Instability
Authors:
Savannah D. Gowen,
Thomas E. Videbaek,
Sidney R. Nagel
Abstract:
The viscous fingering instability, which forms when a less-viscous fluid invades a more-viscous one within a confined geometry, is an iconic system for studying pattern formation. For both miscible and immiscible fluid pairs the growth dynamics change after the initial instability onset and the global structures, typical of late-time growth, are governed by the viscosity ratio. Here we introduce a…
▽ More
The viscous fingering instability, which forms when a less-viscous fluid invades a more-viscous one within a confined geometry, is an iconic system for studying pattern formation. For both miscible and immiscible fluid pairs the growth dynamics change after the initial instability onset and the global structures, typical of late-time growth, are governed by the viscosity ratio. Here we introduce an experimental technique to measure flow throughout the inner and outer fluids. This probes the existence of a new length scale associated with the local pressure gradients around the interface and allows us to compare our results to the predictions of a previously proposed model for late-time finger growth.
△ Less
Submitted 22 April, 2024; v1 submitted 2 February, 2024;
originally announced February 2024.
-
Turbulence Generation by Shock Interaction with a Highly Non-Uniform Medium
Authors:
Seth Davidovits,
Christoph Federrath,
Romain Teyssier,
Kumar S. Raman,
David C. Collins,
Sabrina R. Nagel
Abstract:
An initially planar shock wave propagating into a medium of non-uniform density will be perturbed, leading to the generation of post-shock velocity perturbations. Using numerical simulations we study this phenomenon in the case of highly-non-uniform density (order-unity normalized variance, $σ_ρ/\overlineρ \sim 1$) and strong shocks (shock Mach numbers $\overline{M}_s \gtrsim 10$). This leads to a…
▽ More
An initially planar shock wave propagating into a medium of non-uniform density will be perturbed, leading to the generation of post-shock velocity perturbations. Using numerical simulations we study this phenomenon in the case of highly-non-uniform density (order-unity normalized variance, $σ_ρ/\overlineρ \sim 1$) and strong shocks (shock Mach numbers $\overline{M}_s \gtrsim 10$). This leads to a highly disrupted shock and a turbulent post-shock flow. We simulate this interaction for a range of shock drives and initial density configurations meant to mimic those which might be presently achieved in experiments. Theoretical considerations lead to scaling relations, which are found to reasonably predict the post-shock turbulence properties. The turbulent velocity dispersion and turbulent Mach number are found to depend on the pre-shock density dispersion and shock speed in a manner consistent with the linear Richtymer-Meshkov instability prediction. We also show a dependence of the turbulence generation on the scale of density perturbations. The post-shock pressure and density, which can be substantially reduced relative to the unperturbed case, are found to be reasonably predicted by a simplified analysis that treats the extended shock transition region as a single normal shock.
△ Less
Submitted 31 May, 2022;
originally announced May 2022.
-
The driving mode of shock-driven turbulence
Authors:
Saee Dhawalikar,
Christoph Federrath,
Seth Davidovits,
Romain Teyssier,
Sabrina R. Nagel,
Bruce A. Remington,
David C. Collins
Abstract:
Turbulence in the interstellar medium (ISM) is crucial in the process of star formation. Shocks produced by supernova explosions, jets, radiation from massive stars, or galactic spiral-arm dynamics are amongst the most common drivers of turbulence in the ISM. However, it is not fully understood how shocks drive turbulence, in particular whether shock driving is a more solenoidal(rotational, diverg…
▽ More
Turbulence in the interstellar medium (ISM) is crucial in the process of star formation. Shocks produced by supernova explosions, jets, radiation from massive stars, or galactic spiral-arm dynamics are amongst the most common drivers of turbulence in the ISM. However, it is not fully understood how shocks drive turbulence, in particular whether shock driving is a more solenoidal(rotational, divergence-free) or a more compressive (potential, curl-free) mode of driving turbulence. The mode of turbulence driving has profound consequences for star formation, with compressive driving producing three times larger density dispersion, and an order of magnitude higher star formation rate than solenoidal driving. Here, we use hydrodynamical simulations of a shock inducing turbulent motions in a structured, multi-phase medium. This is done in the context of a laser-induced shock, propagating into a foam material, in preparation for an experiment to be performed at the National Ignition Facility (NIF). Specifically, we analyse the density and velocity distributions in the shocked turbulent medium, and measure the turbulence driving parameter $b=(σ^{2 Γ}_{ρ/\langle ρ\rangle}-1)^{1/2} (1-σ_{ρ\langle ρ\rangle}^{-2})^{-1/2}\mathcal{M}^{-1}Γ^{-1/2}$ with the density dispersion $σ_{ρ/ \langle ρ\rangle}$, the turbulent Mach number $\mathcal{M}$, and the polytropic exponent $Γ$. Purely solenoidal and purely compressive driving correspond to $b \sim 1/3$ and $b \sim 1$, respectively. Using simulations in which a shock is driven into a multi-phase medium with structures of different sizes and $Γ< 1$, we find $b \sim 1$ for all cases, showing that shock-driven turbulence is consistent with strongly compressive driving.
△ Less
Submitted 28 May, 2022;
originally announced May 2022.
-
Design of a High-Resolution Rayleigh-Taylor Experiment with the Crystal Backlighter Imager on the National Ignition Facility
Authors:
Adrianna M. Angulo,
Sabrina R. Nagel,
Channing M. Huntington,
Christopher Weber,
Harry F. Robey,
Gareth N. Hall,
Louisa Pickworth,
Carolyn C. Kuranz
Abstract:
The Rayleigh-Taylor (RT) instability affects a vast range of High Energy Density (HED) length scales, spanning from supernova explosions (10$^{13}$ m) to inertial confinement fusion (10$^{-6}$ m). In inertial confinement fusion, the RT instability is known to induce mixing or turbulent transition, which in turn cools the hot spot and hinders ignition. The fine-scale features of the RT instability,…
▽ More
The Rayleigh-Taylor (RT) instability affects a vast range of High Energy Density (HED) length scales, spanning from supernova explosions (10$^{13}$ m) to inertial confinement fusion (10$^{-6}$ m). In inertial confinement fusion, the RT instability is known to induce mixing or turbulent transition, which in turn cools the hot spot and hinders ignition. The fine-scale features of the RT instability, which are difficult to image in HED physics, may help determine if the system is mixing or is transitioning to turbulence. Earlier diagnostics lacked the spatial and temporal resolution necessary to diagnose the dynamics that occur along the RT structure. A recently developed diagnostic, the Crystal Backlighter Imager (CBI), \cite{Hall:2019, DoZonePlate} can now produce an x-ray radiograph capable of resolving the fine-scale features expected in these RT unstable systems. This paper describes an experimental design that adapts a well-characterized National Ignition Facility (NIF) platform to accommodate the CBI diagnostic. Simulations and synthetic radiographs highlight the resolution capabilities of the CBI in comparison to previous diagnostics. The improved resolution of the system can provide new observations to study the RT instability's involvement in mixing and the transition to turbulence in the HED regime.
△ Less
Submitted 30 November, 2021;
originally announced December 2021.
-
Determining the refractive index, absolute thickness and local slope of a thin transparent film using multi-wavelength and multi-incident-angle interference
Authors:
Mengfei He,
Sidney R. Nagel
Abstract:
We describe a high-speed interferometric method, using multiple angles of incidence and multiple wavelengths, to measure the absolute thickness, tilt, the local angle between the surfaces, and the refractive index of a fluctuating transparent wedge. The method is well suited for biological, fluid and industrial applications.
We describe a high-speed interferometric method, using multiple angles of incidence and multiple wavelengths, to measure the absolute thickness, tilt, the local angle between the surfaces, and the refractive index of a fluctuating transparent wedge. The method is well suited for biological, fluid and industrial applications.
△ Less
Submitted 20 May, 2020;
originally announced May 2020.
-
The limits of multifunctionality in tunable networks
Authors:
Jason W. Rocks,
Henrik Ronellenfitsch,
Andrea J. Liu,
Sidney R. Nagel,
Eleni Katifori
Abstract:
Nature is rife with networks that are functionally optimized to propagate inputs in order to perform specific tasks. Whether via genetic evolution or dynamic adaptation, many networks create functionality by locally tuning interactions between nodes. Here we explore this behavior in two contexts: strain propagation in mechanical networks and pressure redistribution in flow networks. By adding and…
▽ More
Nature is rife with networks that are functionally optimized to propagate inputs in order to perform specific tasks. Whether via genetic evolution or dynamic adaptation, many networks create functionality by locally tuning interactions between nodes. Here we explore this behavior in two contexts: strain propagation in mechanical networks and pressure redistribution in flow networks. By adding and removing links, we are able to optimize both types of networks to perform specific functions. We define a single function as a tuned response of a single "target" link when another, predetermined part of the network is activated. Using network structures generated via such optimization, we investigate how many simultaneous functions such networks can be programmed to fulfill. We find that both flow and mechanical networks display qualitatively similar phase transitions in the number of targets that can be tuned, along with the same robust finite-size scaling behavior. We discuss how these properties can be understood in the context of a new class of constraint-satisfaction problems.
△ Less
Submitted 5 October, 2018; v1 submitted 1 May, 2018;
originally announced May 2018.
-
Diffusion-driven transition between two regimes of viscous fingering
Authors:
Thomas E. Videbæk,
Sidney R. Nagel
Abstract:
Viscous fingering patterns can form at the interface between two immiscible fluids confined in the gap between a pair of flat plates; whenever the fluid with lower viscosity displaces the one of higher viscosity the interface is unstable. For miscible fluids the situation is more complicated due to the formation of interfacial structure in the thin dimension spanning the gap. Here we study the eff…
▽ More
Viscous fingering patterns can form at the interface between two immiscible fluids confined in the gap between a pair of flat plates; whenever the fluid with lower viscosity displaces the one of higher viscosity the interface is unstable. For miscible fluids the situation is more complicated due to the formation of interfacial structure in the thin dimension spanning the gap. Here we study the effect of the inherent diffusion between the two miscible fluids on this structure and on the viscous fingering patterns that emerge. We discover an unexpected transition separating two distinct regimes where the pattern morphologies and mode of onset are different. This transition is marked by a regime of transient stability as the structure of the fingers evolves from having three-dimensional structure to being quasi-two dimensional. The presence of diffusion allows an instability to form where it was otherwise forbidden.
△ Less
Submitted 14 December, 2018; v1 submitted 20 March, 2018;
originally announced March 2018.
-
Drop splashing is independent of substrate wetting
Authors:
Andrzej Latka,
Arnout M. P. Boelens,
Sidney R. Nagel,
Juan J. de Pablo
Abstract:
A liquid drop impacting a dry solid surface with sufficient kinetic energy will splash, breaking apart into numerous secondary droplets. This phenomenon shows many similarities to forced wetting, including the entrainment of air at the contact line. Because of these similarities and the fact that forced wetting has been shown to depend on the wetting properties of the surface, existing theories pr…
▽ More
A liquid drop impacting a dry solid surface with sufficient kinetic energy will splash, breaking apart into numerous secondary droplets. This phenomenon shows many similarities to forced wetting, including the entrainment of air at the contact line. Because of these similarities and the fact that forced wetting has been shown to depend on the wetting properties of the surface, existing theories predict splashing to depend on wetting properties as well. However, using high-speed interference imaging we observe that at high capillary numbers wetting properties have no effect on splashing for various liquid-surface combinations. Additionally, by fully resolving the Navier-Stokes equations at length and time scales inaccessible to experiments, we find that the shape and motion of the air-liquid interface at the contact line at the edge of the droplet are independent of wettability. We use these findings to evaluate existing theories and to compare splashing with forced wetting.
△ Less
Submitted 23 January, 2018; v1 submitted 29 July, 2016;
originally announced July 2016.
-
Dynamics of viscous coalescing droplets in a saturated vapor phase
Authors:
Lina Baroudi,
Sidney R. Nagel,
Jeffrey F. Morris,
Taehun Lee
Abstract:
The dynamics of two liquid droplets coalescing in their saturated vapor phase are investigated by Lattice Boltzmann numerical simulations. Attention is paid to the effect of the vapor phase on the formation and growth dynamics of the liquid bridge in the viscous regime. We observe that the onset of the coalescence occurs earlier and the expansion of the bridge initially proceeds faster when the co…
▽ More
The dynamics of two liquid droplets coalescing in their saturated vapor phase are investigated by Lattice Boltzmann numerical simulations. Attention is paid to the effect of the vapor phase on the formation and growth dynamics of the liquid bridge in the viscous regime. We observe that the onset of the coalescence occurs earlier and the expansion of the bridge initially proceeds faster when the coalescence takes place in a saturated vapor compared to the coalescence in a non-condensable gas. We argue that the initially faster evolution of the coalescence in the saturated vapor is caused by the vapor transport through condensation during the early stages of the coalescence.
△ Less
Submitted 21 December, 2015;
originally announced December 2015.
-
Patterns in Illinois Educational School Data
Authors:
Cacey S. Stevens,
Michael P. Marder,
Sidney R. Nagel
Abstract:
We examine Illinois educational data from standardized exams and analyze primary factors affecting the achievement of public school students. We focus on the simplest possible models: representation of data through visualizations and regressions on single variables. Exam scores are shown to depend on school type, location, and poverty concentration. For most schools in Illinois, student test score…
▽ More
We examine Illinois educational data from standardized exams and analyze primary factors affecting the achievement of public school students. We focus on the simplest possible models: representation of data through visualizations and regressions on single variables. Exam scores are shown to depend on school type, location, and poverty concentration. For most schools in Illinois, student test scores decline linearly with poverty concentration. However Chicago must be treated separately. Selective schools in Chicago, as well as some traditional and charter schools, deviate from this pattern based on poverty. For any poverty level, Chicago schools perform better than those in the rest of Illinois. Selective programs for gifted students show high performance at each grade level, most notably at the high school level, when compared to other Illinois school types. The case of Chicago charter schools is more complex. In the last six years, their students' scores overtook those of students in traditional Chicago high schools.
△ Less
Submitted 29 January, 2015;
originally announced February 2015.
-
An island of stability in a sea of fingers: emergent large-scale features of the viscous flow instability
Authors:
Irmgard Bischofberger,
Radha Ramachandran,
Sidney R. Nagel
Abstract:
The displacement of a more viscous fluid by a less viscous one in a quasi-two dimensional geometry leads to the formation of complex fingering patterns. This fingering has been characterized by a most unstable wavelength, $λ_c$, which depends on the viscosity difference between the two immiscible fluids and sets the characteristic width of the fingers. How the finger length grows after the instabi…
▽ More
The displacement of a more viscous fluid by a less viscous one in a quasi-two dimensional geometry leads to the formation of complex fingering patterns. This fingering has been characterized by a most unstable wavelength, $λ_c$, which depends on the viscosity difference between the two immiscible fluids and sets the characteristic width of the fingers. How the finger length grows after the instability occurs is an equally important, but previously overlooked, aspect that characterizes the global features of the patterns. As the lower viscosity fluid is injected, we show that there is a stable inner region where the outer fluid is completely displaced. The ratio of the finger length to the radius of this stable region depends only on the viscosity ratio of the fluids and is decoupled from $λ_c$.
△ Less
Submitted 29 January, 2015; v1 submitted 28 October, 2014;
originally announced October 2014.
-
Fingering versus stability in the limit of zero interfacial tension
Authors:
Irmgard Bischofberger,
Radha Ramachandran,
Sidney R. Nagel
Abstract:
The invasion of one fluid into another of higher viscosity in a quasi-two dimensional geometry typically produces complex fingering patterns. Because interfacial tension suppresses short-wavelength fluctuations, its elimination by using pairs of miscible fluids would suggest an instability producing highly ramified singular structures. Previous studies focused on wavelength selection at the instab…
▽ More
The invasion of one fluid into another of higher viscosity in a quasi-two dimensional geometry typically produces complex fingering patterns. Because interfacial tension suppresses short-wavelength fluctuations, its elimination by using pairs of miscible fluids would suggest an instability producing highly ramified singular structures. Previous studies focused on wavelength selection at the instability onset and overlooked the striking features appearing more globally. Here we investigate the non-linear growth that occurs after the instability has been fully established. We find a rich variety of patterns that are characterized by the viscosity ratio between the inner and the outer fluid, $η_{in}$/$η_{out}$, as distinct from the most-unstable wavelength, which determines the onset of the instability. As $η_{in}$/$η_{out}$ increases, a regime dominated by long highly-branched fractal fingers gives way to one dominated by blunt stable structures characteristic of proportionate growth. Simultaneously, a central region of complete outer-fluid displacement grows until it encompasses the entire pattern at $η_{in}$/$η_{out}$$\approx$0.3.
△ Less
Submitted 27 October, 2014;
originally announced October 2014.
-
Coalescence of bubbles and drops in an outer fluid
Authors:
Joseph D. Paulsen,
Rémi Carmigniani,
Anerudh Kannan,
Justin C. Burton,
Sidney R. Nagel
Abstract:
When two liquid drops touch, a microscopic connecting liquid bridge forms and rapidly grows as the two drops merge into one. Whereas coalescence has been thoroughly studied when drops coalesce in vacuum or air, many important situations involve coalescence in a dense surrounding fluid, such as oil coalescence in brine. Here we study the merging of gas bubbles and liquid drops in an external fluid.…
▽ More
When two liquid drops touch, a microscopic connecting liquid bridge forms and rapidly grows as the two drops merge into one. Whereas coalescence has been thoroughly studied when drops coalesce in vacuum or air, many important situations involve coalescence in a dense surrounding fluid, such as oil coalescence in brine. Here we study the merging of gas bubbles and liquid drops in an external fluid. Our data indicate that the flows occur over much larger length scales in the outer fluid than inside the drops themselves. Thus we find that the asymptotic early regime is always dominated by the viscosity of the drops, independent of the external fluid. A phase diagram showing the crossovers into the different possible late-time dynamics identifies a dimensionless number that signifies when the external viscosity can be important.
△ Less
Submitted 24 July, 2014;
originally announced July 2014.
-
Buffered spectrally-peaked proton beams in the relativistic-transparency regime
Authors:
N. P. Dover,
M. J. V. Streeter,
C. A. J. Palmer,
H. Ahmed,
B. Albertazzi,
M. Borghesi,
D. C. Carroll,
J. Fuchs,
R. Heathcote,
P. Hilz,
K. F. Kakolee,
S. Kar,
R. Kodama,
A. Kon,
D. A. MacLellan,
P. McKenna,
S. R. Nagel,
M. Nakatsutsumi,
D. Neely,
M. M. Notley,
R. Prasad,
G. Scott,
M. Tampo,
M. Zepf,
J. Schreiber
, et al. (1 additional authors not shown)
Abstract:
Spectrally-peaked proton beams ($E_{p}\approx 8$ MeV, $ΔE\approx 4$ MeV) have been observed from the interaction of an intense laser ($> 10^{19 }$ Wcm$^{-2}$) with ultrathin CH foils, as measured by spectrally-resolved full beam profiles. These beams are reproducibly generated for foil thicknesses (5-100 nm), and exhibit narrowing divergence with decreasing target thickness down to…
▽ More
Spectrally-peaked proton beams ($E_{p}\approx 8$ MeV, $ΔE\approx 4$ MeV) have been observed from the interaction of an intense laser ($> 10^{19 }$ Wcm$^{-2}$) with ultrathin CH foils, as measured by spectrally-resolved full beam profiles. These beams are reproducibly generated for foil thicknesses (5-100 nm), and exhibit narrowing divergence with decreasing target thickness down to $\approx 8^\circ$ for 5 nm. Simulations demonstrate that the narrow energy spread feature is a result of buffered acceleration of protons. Due to their higher charge-to-mass ratio, the protons outrun a carbon plasma driven in the relativistic transparency regime.
△ Less
Submitted 13 June, 2014;
originally announced June 2014.
-
Comparison of splashing in high and low viscosity liquids
Authors:
Cacey S. Stevens,
Andrzej Latka,
Sidney R. Nagel
Abstract:
We explore the evolution of a splash when a liquid drop impacts a smooth, dry surface. There are two splashing regimes that occur when the liquid viscosity is varied, as is evidenced by its dependence on ambient gas pressure. A high-viscosity drop splashes by emitting a thin sheet of liquid from a spreading liquid lamella long after the drop has first contacted the solid. Likewise, we find that th…
▽ More
We explore the evolution of a splash when a liquid drop impacts a smooth, dry surface. There are two splashing regimes that occur when the liquid viscosity is varied, as is evidenced by its dependence on ambient gas pressure. A high-viscosity drop splashes by emitting a thin sheet of liquid from a spreading liquid lamella long after the drop has first contacted the solid. Likewise, we find that there is also a delay in the ejection of a thin sheet when a low-viscosity drop splashes. We show how the ejection time of the thin sheet depends on liquid viscosity and ambient gas pressure.
△ Less
Submitted 26 February, 2014;
originally announced February 2014.
-
Impact dynamics of granular jets with non-circular cross-sections
Authors:
Xiang Cheng,
Leonardo Gordillo,
Wendy W. Zhang,
Heinrich M. Jaeger,
Sidney R. Nagel
Abstract:
Using high-speed photography, we investigate two distinct regimes of the impact dynamics of granular jets with non-circular cross-sections. In the steady-state regime, we observe the formation of thin granular sheets with anisotropic shapes and show that the degree of anisotropy increases with the aspect ratio of the jet's cross-section. Our results illustrate the liquid-like behavior of granular…
▽ More
Using high-speed photography, we investigate two distinct regimes of the impact dynamics of granular jets with non-circular cross-sections. In the steady-state regime, we observe the formation of thin granular sheets with anisotropic shapes and show that the degree of anisotropy increases with the aspect ratio of the jet's cross-section. Our results illustrate the liquid-like behavior of granular materials during impact and demonstrate that a collective hydrodynamic flow emerges from strongly interacting discrete particles. We discuss the analogy between our experiments and those from the Relativistic Heavy Ion Collider (RHIC), where similar anisotropic ejecta from a quark-gluon plasma have been observed in heavy-ion impact.
△ Less
Submitted 23 August, 2014; v1 submitted 25 July, 2013;
originally announced July 2013.
-
Vibration and Nonlinear Resonance in the Break-up of an Underwater Bubble
Authors:
Lipeng Lai,
Nathan C. Keim,
Kamel Fezzaa,
Wendy W. Zhang,
Sidney R. Nagel
Abstract:
We use high-speed X-ray phase-contrast imaging, weakly nonlinear analysis and boundary integral simulations to characterize the final stage of underwater bubble break-up. The X-ray imaging study shows that an initial azimuthal perturbation to the shape of the bubble neck gives rise to oscillations that increasingly distort the cross-section shape. These oscillations terminate in a pinch-off where…
▽ More
We use high-speed X-ray phase-contrast imaging, weakly nonlinear analysis and boundary integral simulations to characterize the final stage of underwater bubble break-up. The X-ray imaging study shows that an initial azimuthal perturbation to the shape of the bubble neck gives rise to oscillations that increasingly distort the cross-section shape. These oscillations terminate in a pinch-off where the bubble surface develops concave regions that contact similar to what occurs when two liquid drops coalesce. We also present a weakly nonlinear analysis that shows that this coalescence-like mode of pinch-off occurs when the initial shape oscillation interferes constructively with the higher harmonics it generates and thus reinforce each other's effects in bringing about bubble break-up. Finally we present numerical results that confirm the weakly nonlinear analysis scenario as well as provide insight into observed shape reversals. They demonstrate that when the oscillations interfere destructively, a qualitatively different mode of pinch-off results where the cross-section profile of the bubble neck develops sharply-curved regions.
△ Less
Submitted 24 July, 2013;
originally announced July 2013.
-
Still water: dead zones and collimated ejecta from the impact of granular jets
Authors:
Jake Ellowitz,
Herve Turlier,
Nicholas Guttenberg,
Wendy W. Zhang,
Sidney R. Nagel
Abstract:
When a dense granular jet hits a target, it forms a large dead zone and ejects a highly collimated conical sheet with a well-defined opening angle. Using experiments, simulations, and continuum modeling, we find that this opening angle is insensitive to the precise target shape and the dissipation mechanisms in the flow. We show that this surprising insensitivity arises because dense granular jet…
▽ More
When a dense granular jet hits a target, it forms a large dead zone and ejects a highly collimated conical sheet with a well-defined opening angle. Using experiments, simulations, and continuum modeling, we find that this opening angle is insensitive to the precise target shape and the dissipation mechanisms in the flow. We show that this surprising insensitivity arises because dense granular jet impact, though highly dissipative, is nonetheless controlled by the limit of perfect fluid flow.
△ Less
Submitted 16 April, 2013;
originally announced April 2013.
-
The inexorable resistance of inertia determines the initial regime of drop coalescence
Authors:
Joseph D. Paulsen,
Justin C. Burton,
Sidney R. Nagel,
Santosh Appathurai,
Michael T. Harris,
Osman A. Basaran
Abstract:
Drop coalescence is central to diverse processes involving dispersions of drops in industrial, engineering and scientific realms. During coalescence, two drops first touch and then merge as the liquid neck connecting them grows from initially microscopic scales to a size comparable to the drop diameters. The curvature of the interface is infinite at the point where the drops first make contact, an…
▽ More
Drop coalescence is central to diverse processes involving dispersions of drops in industrial, engineering and scientific realms. During coalescence, two drops first touch and then merge as the liquid neck connecting them grows from initially microscopic scales to a size comparable to the drop diameters. The curvature of the interface is infinite at the point where the drops first make contact, and the flows that ensue as the two drops coalesce are intimately coupled to this singularity in the dynamics. Conventionally, this process has been thought to have just two dynamical regimes: a viscous and an inertial regime with a crossover region between them. We use experiments and simulations to reveal that a third regime, one that describes the initial dynamics of coalescence for all drop viscosities, has been missed. An argument based on force balance allows the construction of a new coalescence phase diagram.
△ Less
Submitted 18 April, 2012;
originally announced April 2012.
-
Creation of prompt and thin-sheet splashing by varying surface roughness or increasing air pressure
Authors:
Andrzej Latka,
Ariana Strandburg-Peshkin,
Michelle M. Driscoll,
Cacey S. Stevens,
Sidney R. Nagel
Abstract:
A liquid drop impacting a solid surface may splash by emitting a thin liquid sheet that subsequently breaks apart or by promptly ejecting droplets from the advancing liquid-solid contact line. Using high-speed imaging, we show that air pressure and surface roughness influence both splash mechanisms. Roughness increases prompt splashing at the advancing contact line but inhibits the formation of th…
▽ More
A liquid drop impacting a solid surface may splash by emitting a thin liquid sheet that subsequently breaks apart or by promptly ejecting droplets from the advancing liquid-solid contact line. Using high-speed imaging, we show that air pressure and surface roughness influence both splash mechanisms. Roughness increases prompt splashing at the advancing contact line but inhibits the formation of the thin sheet. If the air pressure is lowered, droplet ejection is suppressed not only during thin-sheet formation but for prompt splashing as well. The threshold pressure depends on impact velocity, liquid viscosity and surface roughness.
△ Less
Submitted 22 June, 2012; v1 submitted 13 March, 2012;
originally announced March 2012.
-
The Geometry of the Vapor Layer Under a Leidenfrost Drop
Authors:
J. C. Burton,
A. L. Sharpe,
R. C. A. van der Veen,
A. Franco,
S. R. Nagel
Abstract:
In the Leidenfrost effect, liquid drops deposited on a hot surface levitate on a thin vapor cushion fed by evaporation of the liquid. This vapor layer forms a concave depression in the drop interface. Using laser-light interference coupled to high-speed imaging, we measured the radius, curvature, and height of the vapor pocket, as well as non-axisymmetric fluctuations of the interface for water dr…
▽ More
In the Leidenfrost effect, liquid drops deposited on a hot surface levitate on a thin vapor cushion fed by evaporation of the liquid. This vapor layer forms a concave depression in the drop interface. Using laser-light interference coupled to high-speed imaging, we measured the radius, curvature, and height of the vapor pocket, as well as non-axisymmetric fluctuations of the interface for water drops at different temperatures. The geometry of the vapor pocket depends primarily on the drop size and not on the substrate temperature.
△ Less
Submitted 20 June, 2012; v1 submitted 9 February, 2012;
originally announced February 2012.
-
Ultrafast Interference Imaging of Air in Splashing Dynamics
Authors:
Michelle M. Driscoll,
Sidney R. Nagel
Abstract:
A drop impacting a solid surface with sufficient velocity will emit many small droplets creating a splash. However, splashing is completely suppressed if the surrounding gas pressure is lowered. The mechanism by which the gas affects splashing remains unknown. We use high-speed interference imaging to measure the air beneath all regions of a spreading viscous drop as well as optical absorption to…
▽ More
A drop impacting a solid surface with sufficient velocity will emit many small droplets creating a splash. However, splashing is completely suppressed if the surrounding gas pressure is lowered. The mechanism by which the gas affects splashing remains unknown. We use high-speed interference imaging to measure the air beneath all regions of a spreading viscous drop as well as optical absorption to measure the drop thickness. Although an initial air bubble is created on impact, no significant air layer persists until the time a splash is created. This suggests that splashing in our experimentally accessible range of viscosities is initiated at the edge of the drop as it encroaches into the surrounding gas.
△ Less
Submitted 4 August, 2011;
originally announced August 2011.
-
Viscous to Inertial Crossover in Liquid Drop Coalescence
Authors:
Joseph D. Paulsen,
Justin C. Burton,
Sidney R. Nagel
Abstract:
Using an electrical method and high-speed imaging we probe drop coalescence down to 10 ns after the drops touch. By varying the liquid viscosity over two decades, we conclude that at sufficiently low approach velocity where deformation is not present, the drops coalesce with an unexpectedly late crossover time between a regime dominated by viscous and one dominated by inertial effects. We argue th…
▽ More
Using an electrical method and high-speed imaging we probe drop coalescence down to 10 ns after the drops touch. By varying the liquid viscosity over two decades, we conclude that at sufficiently low approach velocity where deformation is not present, the drops coalesce with an unexpectedly late crossover time between a regime dominated by viscous and one dominated by inertial effects. We argue that the late crossover, not accounted for in the theory, can be explained by an appropriate choice of length-scales present in the flow geometry.
△ Less
Submitted 15 March, 2011; v1 submitted 6 December, 2010;
originally announced December 2010.
-
Complete temporal characterisation of asymmetric pulse compression in a laser wakefield
Authors:
J. Schreiber,
C. Bellei,
S. P. D. Mangles,
C. Kamperidis,
S. Kneip,
S. R. Nagel,
C. A. J. Palmer,
P. P. Rajeev,
Z. Najmudin
Abstract:
We present complete experimental characterisation of the temporal shape of an intense ultrashort 200-TW laser pulse driving a laser wakefield. The phase of the pulse was uniquely measured using (second order) frequency resolved optical gating (FROG). The pulses are asymmetrically compressed, and exhibit a positive chirp consistent with the expected asymmetric self-phase modulation due to photon ac…
▽ More
We present complete experimental characterisation of the temporal shape of an intense ultrashort 200-TW laser pulse driving a laser wakefield. The phase of the pulse was uniquely measured using (second order) frequency resolved optical gating (FROG). The pulses are asymmetrically compressed, and exhibit a positive chirp consistent with the expected asymmetric self-phase modulation due to photon acceleration/deceleration in a relativistic plasma wave. The measured pulse duration decreases linearly with increasing length and density of the plasma, in quantitative agreement with the intensity dependent group velocity variation in the plasma wave.
△ Less
Submitted 18 October, 2010;
originally announced October 2010.
-
Thin Film Formation During Splashing of Viscous Liquids
Authors:
Michelle M. Driscoll,
Cacey S. Stevens,
Sidney R. Nagel
Abstract:
After impact onto a smooth dry surface, a drop of viscous liquid initially spreads in the form of a thick lamella. If the drop splashes, it first emits a thin fluid sheet that can ultimately break up into droplets causing the splash. Ambient gas is crucial for creating this thin sheet. The time for sheet ejection, $t_{ejt}$, depends on impact velocity, liquid viscosity, gas pressure and molecular…
▽ More
After impact onto a smooth dry surface, a drop of viscous liquid initially spreads in the form of a thick lamella. If the drop splashes, it first emits a thin fluid sheet that can ultimately break up into droplets causing the splash. Ambient gas is crucial for creating this thin sheet. The time for sheet ejection, $t_{ejt}$, depends on impact velocity, liquid viscosity, gas pressure and molecular weight. A central air bubble is trapped below the drop at pressures even below that necessary for this sheet formation. In addition, air bubbles are entrained underneath the spreading lamella when the ejected sheet is present. Air entrainment ceases at a lamella velocity that is independent of drop impact velocity as well as ambient gas pressure.
△ Less
Submitted 19 August, 2010; v1 submitted 16 May, 2010;
originally announced May 2010.
-
Micron-scale Fast Electron Filamentation and Recirculation determined from Rear Side Optical Emission in High Intensity Laser-Solid Interactions
Authors:
C. Bellei,
S. R. Nagel,
S. Kar,
A. Henig,
S. Kneip,
C. Palmer,
A. Sävert,
L. Willingale,
D. Carroll,
B. Dromey,
J. S. Green,
K. Markey,
P. Simpson,
R. J. Clarke,
H. Lowe,
D. Neely,
C. Spindloe,
M. Tolley,
M. Kaluza,
S. P. D. Mangles,
P. McKenna,
P. A. Norreys,
J. Schreiber,
M. Zepf,
J. R. Davies
, et al. (2 additional authors not shown)
Abstract:
The transport of relativistic electrons generated in the interaction of petawatt class lasers with solid targets has been studied through measurements of the optical emission from their rear surface. The high degree of polarization of the emission indicates that it is predominantly optical transition radiation. A halo that surrounds the main region of emission is also polarized, and is attribute…
▽ More
The transport of relativistic electrons generated in the interaction of petawatt class lasers with solid targets has been studied through measurements of the optical emission from their rear surface. The high degree of polarization of the emission indicates that it is predominantly optical transition radiation. A halo that surrounds the main region of emission is also polarized, and is attributed to the effect of electron recirculation. The variation of the amplitude of the transition radiation with respect to observation angle provides evidence for the presence of {$μ$m-size} filaments.
△ Less
Submitted 25 February, 2010;
originally announced February 2010.
-
A Bright Spatially-Coherent Compact X-ray Synchrotron Source
Authors:
S. Kneip,
C. McGuffey,
J. L. Martins,
S. F. Martins,
C. Bellei,
V. Chvykov,
F. Dollar,
R. Fonseca,
C. Huntington,
G. Kalintchenko,
A. Maksimchuk,
S. P. D. Mangles,
T. Matsuoka,
S. R. Nagel,
C. Palmer,
J. Schreiber,
K. Ta Phuoc,
A. G. R. Thomas,
V. Yanovsky,
L. O. Silva,
K. Krushelnick,
Z. Najmudin
Abstract:
Each successive generation of x-ray machines has opened up new frontiers in science, such as the first radiographs and the determination of the structure of DNA. State-of-the-art x-ray sources can now produce coherent high brightness keV x-rays and promise a new revolution in imaging complex systems on nanometre and femtosecond scales. Despite the demand, only a few dedicated synchrotron facilit…
▽ More
Each successive generation of x-ray machines has opened up new frontiers in science, such as the first radiographs and the determination of the structure of DNA. State-of-the-art x-ray sources can now produce coherent high brightness keV x-rays and promise a new revolution in imaging complex systems on nanometre and femtosecond scales. Despite the demand, only a few dedicated synchrotron facilities exist worldwide, partially due the size and cost of conventional (accelerator) technology. Here we demonstrate the use of a recently developed compact laser-plasma accelerator to produce a well-collimated, spatially-coherent, intrinsically ultrafast source of hard x-rays. This method reduces the size of the synchrotron source from the tens of metres to centimetre scale, accelerating and wiggling a high electron charge simultaneously. This leads to a narrow-energy spread electron beam and x-ray source that is >1000 times brighter than previously reported plasma wiggler and thus has the potential to facilitate a myriad of uses across the whole spectrum of light-source applications.
△ Less
Submitted 9 December, 2009;
originally announced December 2009.
-
Self-guided wakefield experiments driven by petawatt class ultra-short laser pulses
Authors:
S. P. D. Mangles,
A. G. R. Thomas,
C. Bellei,
A. E. Dangor,
C. Kamperidis,
S. Kneip,
S. R. Nagel,
L. Willingale,
Z. Najmudin
Abstract:
We investigate the extension of self-injecting laser wakefield experiments to the regime that will be accessible with the next generation of petawatt class ultra-short pulse laser systems. Using linear scalings, current experimental trends and numerical simulations we determine the optimal laser and target parameters, i.e. focusing geometry, plasma density and target length, that are required to…
▽ More
We investigate the extension of self-injecting laser wakefield experiments to the regime that will be accessible with the next generation of petawatt class ultra-short pulse laser systems. Using linear scalings, current experimental trends and numerical simulations we determine the optimal laser and target parameters, i.e. focusing geometry, plasma density and target length, that are required to increase the electron beam energy (to > 1 GeV) without the use of external guiding structures.
△ Less
Submitted 5 December, 2007;
originally announced December 2007.
-
Dynamic Control of Laser Produced Proton Beams
Authors:
S. Kar,
K. Markey,
P. T. Simpson,
B. Dromey,
M. Borghesi,
M. Zepf,
C. Bellei,
S. R. Nagel,
S. Kneip,
L. Willingale,
Z. Najmudin,
K. Krushelnick,
J. S. Green,
P. Norreys,
R. J. Clarke,
D. Neely,
D. C. Carroll,
P. McKenna,
E. L. Clark
Abstract:
The emission characteristics of intense laser driven protons are controlled using ultra-strong (of the order of 10^9 V/m) electrostatic fields varying on a few ps timescale. The field structures are achieved by exploiting the high potential of the target (reaching multi-MV during the laser interaction). Suitably shaped targets result in a reduction in the proton beam divergence, and hence an inc…
▽ More
The emission characteristics of intense laser driven protons are controlled using ultra-strong (of the order of 10^9 V/m) electrostatic fields varying on a few ps timescale. The field structures are achieved by exploiting the high potential of the target (reaching multi-MV during the laser interaction). Suitably shaped targets result in a reduction in the proton beam divergence, and hence an increase in proton flux while preserving the high beam quality. The peak focusing power and its temporal variation are shown to depend on the target characteristics, allowing for the collimation of the inherently highly divergent beam and the design of achromatic electrostatic lenses.
△ Less
Submitted 22 October, 2007;
originally announced October 2007.
-
Controlling the direction and amount of a splash with textured surface
Authors:
Lei Xu,
Sidney R. Nagel
Abstract:
Because splashing is such a violent process, one might naively expect that neither the direction of droplet emission nor the amount of ejected material can be controlled with any precision. Even though it is observed countless times in the course of a day, drop splashing is highly non-intuitive: for example, it is surprising that the surrounding air pressure determines whether a drop will splash w…
▽ More
Because splashing is such a violent process, one might naively expect that neither the direction of droplet emission nor the amount of ejected material can be controlled with any precision. Even though it is observed countless times in the course of a day, drop splashing is highly non-intuitive: for example, it is surprising that the surrounding air pressure determines whether a drop will splash when hitting a smooth surface. Here we describe a discovery with significant practical ramifications: the direction, as well as the number, of the ejected droplets can be controlled by the texture of a surface.
△ Less
Submitted 17 August, 2010; v1 submitted 12 February, 2007;
originally announced February 2007.
-
Splashing of liquids: interplay of surface roughness with surrounding gas
Authors:
Lei Xu,
Loreto Barcos,
Sidney R. Nagel
Abstract:
We investigate the interplay between substrate roughness and surrounding gas pressure in controlling the dynamics of splashing when a liquid drop hits a dry solid surface. We associate two distinct forms of splashing with each of these control parameters: prompt splashing is due to surface roughness and corona splashing is due to instabilities produced by the surrounding gas. The size distributi…
▽ More
We investigate the interplay between substrate roughness and surrounding gas pressure in controlling the dynamics of splashing when a liquid drop hits a dry solid surface. We associate two distinct forms of splashing with each of these control parameters: prompt splashing is due to surface roughness and corona splashing is due to instabilities produced by the surrounding gas. The size distribution of ejected droplets reveals the length scales of the underlying droplet-creation process in both cases.
△ Less
Submitted 17 December, 2007; v1 submitted 7 August, 2006;
originally announced August 2006.
-
Drop Splashing on a Dry Smooth Surface
Authors:
Lei Xu,
Wendy W. Zhang,
Sidney R. Nagel
Abstract:
The corona splash due to the impact of a liquid drop on a smooth dry substrate is investigated with high speed photography. A striking phenomenon is observed: splashing can be completely suppressed by decreasing the pressure of the surrounding gas. The threshold pressure where a splash first occurs is measured as a function of the impact velocity and found to scale with the molecular weight of t…
▽ More
The corona splash due to the impact of a liquid drop on a smooth dry substrate is investigated with high speed photography. A striking phenomenon is observed: splashing can be completely suppressed by decreasing the pressure of the surrounding gas. The threshold pressure where a splash first occurs is measured as a function of the impact velocity and found to scale with the molecular weight of the gas and the viscosity of the liquid. Both experimental scaling relations support a model in which compressible effects in the gas are responsible for splashing in liquid solid impacts.
△ Less
Submitted 28 January, 2005;
originally announced January 2005.
-
Scaling at the selective withdrawal transition
Authors:
Itai Cohen,
Sidney R. Nagel
Abstract:
In the selective withdrawal experiment fluid is withdrawn through a tube with its tip suspended a distance S above an unperturbed two-fluid interface. At low withdrawal rates, Q, the interface forms a steady state hump and only the upper fluid is withdrawn. When Q is increased (or S decreased), the interface undergoes a transition so that the lower fluid is entrained with the upper one, forming…
▽ More
In the selective withdrawal experiment fluid is withdrawn through a tube with its tip suspended a distance S above an unperturbed two-fluid interface. At low withdrawal rates, Q, the interface forms a steady state hump and only the upper fluid is withdrawn. When Q is increased (or S decreased), the interface undergoes a transition so that the lower fluid is entrained with the upper one, forming a thin steady-state spout. Near this discontinuous transition the hump curvature becomes very large and displays power-law scaling behavior. This scaling is used to show that steady-state profiles for humps at different flow rates and tube heights can all be scaled onto a single similarity profile.
△ Less
Submitted 16 January, 2002;
originally announced January 2002.
-
The Two Fluid Drop Snap-off Problem: Experiments and Theory
Authors:
Itai Cohen,
Michael P. Brenner,
Jens Eggers,
Sidney R. Nagel
Abstract:
We address the dynamics of a drop with viscosity $λη$ breaking up inside another fluid of viscosity $η$. For $λ=1$, a scaling theory predicts the time evolution of the drop shape near the point of snap-off which is in excellent agreement with experiment and previous simulations of Lister and Stone. We also investigate the $λ$ dependence of the shape and breaking rate.
We address the dynamics of a drop with viscosity $λη$ breaking up inside another fluid of viscosity $η$. For $λ=1$, a scaling theory predicts the time evolution of the drop shape near the point of snap-off which is in excellent agreement with experiment and previous simulations of Lister and Stone. We also investigate the $λ$ dependence of the shape and breaking rate.
△ Less
Submitted 24 February, 1999;
originally announced February 1999.
