Showing 1–50 of 55 results for author: Murphy, T

Terahertz Antenna Impedance Matched to a Graphene Photodetector

Authors: François Joint, Kunyi Zhang, Jayaprakash Poojali, Daniel Lewis, Michael Pedowitz, Brendan Jordan, Gyan Prakash, Ashraf Ali, Kevin Daniels, Rachael L. Myers-Ward, Thomas E. Murphy, Howard D. Drew

Abstract: Develo** low-power, high-sensitivity photodetectors for the terahertz (THz) band that operate at room temperature is an important challenge in optoelectronics. In this study, we introduce a photo-thermal-electric (PTE) effect detector based on quasi-free standing bilayer graphene (BLG) on a silicon carbide (SiC) substrate, designed for the THz frequency range. Our detector's performance hinges o… ▽ More Develo** low-power, high-sensitivity photodetectors for the terahertz (THz) band that operate at room temperature is an important challenge in optoelectronics. In this study, we introduce a photo-thermal-electric (PTE) effect detector based on quasi-free standing bilayer graphene (BLG) on a silicon carbide (SiC) substrate, designed for the THz frequency range. Our detector's performance hinges on a quasi-optical coupling scheme, which integrates an aspherical silicon lens, to optimize impedance matching between the THz antenna and the graphene p-n junction. At room temperature, we achieved a noise equivalent power (NEP) of less than 300 $pW/\sqrt{Hz}$. Through an impedance matching analysis, we coupled a planar antenna with a graphene p-n junction, inserted in parallel to the nano-gap of the antenna, via two coupling capacitors. By adjusting the capacitors and the antenna arm length, we tailored the antenna's maximum infrared power absorption to specific frequencies. The sensitivity, spectral properties, and scalability of our material make it an ideal candidate for future development of far-infrared detectors operating at room temperature. △ Less

Submitted 10 May, 2024; originally announced May 2024.

Comments: 21 pages, 4 figures

Performance of a modular ton-scale pixel-readout liquid argon time projection chamber

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, B. Aimard, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, A. Alton, R. Alvarez, T. Alves, H. Amar, P. Amedo, J. Anderson, D. A. Andrade , et al. (1340 additional authors not shown)

Abstract: The Module-0 Demonstrator is a single-phase 600 kg liquid argon time projection chamber operated as a prototype for the DUNE liquid argon near detector. Based on the ArgonCube design concept, Module-0 features a novel 80k-channel pixelated charge readout and advanced high-coverage photon detection system. In this paper, we present an analysis of an eight-day data set consisting of 25 million cosmi… ▽ More The Module-0 Demonstrator is a single-phase 600 kg liquid argon time projection chamber operated as a prototype for the DUNE liquid argon near detector. Based on the ArgonCube design concept, Module-0 features a novel 80k-channel pixelated charge readout and advanced high-coverage photon detection system. In this paper, we present an analysis of an eight-day data set consisting of 25 million cosmic ray events collected in the spring of 2021. We use this sample to demonstrate the imaging performance of the charge and light readout systems as well as the signal correlations between the two. We also report argon purity and detector uniformity measurements, and provide comparisons to detector simulations. △ Less

Submitted 5 March, 2024; originally announced March 2024.

Comments: 47 pages, 41 figures

Report number: FERMILAB-PUB-24-0073-LBNF

A clear case for dust obscuration of the lunar retroreflectors

Authors: Sanchit Sabhlok, James B. R. Battat, Nicholas R. Colmenares, Daniel P. Gonzales, Thomas W. Murphy Jr

Abstract: The passive retroreflector arrays placed on the moon by Apollo 11, 14 and 15 astronauts continue to produce valuable Earth-Moon range measurements that enable high-precision tests of gravitational physics, as well as studies of geo- and selenophysics. The optical throughput of these retroreflectors has declined since their deployment, with an additional signal loss at full moon when the reflectors… ▽ More The passive retroreflector arrays placed on the moon by Apollo 11, 14 and 15 astronauts continue to produce valuable Earth-Moon range measurements that enable high-precision tests of gravitational physics, as well as studies of geo- and selenophysics. The optical throughput of these retroreflectors has declined since their deployment, with an additional signal loss at full moon when the reflectors experience direct solar illumination. We show that the loss in return rate can be attributed to the accumulation of a thin layer of lunar dust on the surfaces of the corner cube retroreflectors. First, a careful analysis of the optical link budget for the Apache Point Observatory Lunar Laser-ranging Operation (APOLLO) experiment reveals that the lunar return rate is 15--20 times smaller than predicted, a deficit that can be explained by a reflector dust covering fraction of ${\sim} 50$\%. Second, range measurements taken during a lunar eclipse indicate that the solar illumination of the retroreflectors degrades their throughput by an additional factor of ${\sim}15$. Finally, a numerical simulation of heat transfer in dust-coated reflectors is able to model the resulting thermal lensing effect, in which thermal gradients in the retroreflectors degrade their far-field diffraction pattern. A comparison of this simulation to eclipse measurements finds a dust coverage fraction of ${\sim}50$%. Taken together, the link analysis, eclipse observations and thermal modeling support the claim that the retroreflectors are obscured by lunar dust, with both link budget and simulation independently finding the dust fraction to be $\sim$50%. △ Less

Submitted 1 March, 2024; originally announced March 2024.

Do** Liquid Argon with Xenon in ProtoDUNE Single-Phase: Effects on Scintillation Light

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, B. Aimard, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, A. Alton, R. Alvarez, H. Amar Es-sghir, P. Amedo, J. Anderson, D. A. Andrade, C. Andreopoulos , et al. (1300 additional authors not shown)

Abstract: Do** of liquid argon TPCs (LArTPCs) with a small concentration of xenon is a technique for light-shifting and facilitates the detection of the liquid argon scintillation light. In this paper, we present the results of the first do** test ever performed in a kiloton-scale LArTPC. From February to May 2020, we carried out this special run in the single-phase DUNE Far Detector prototype (ProtoDUN… ▽ More Do** of liquid argon TPCs (LArTPCs) with a small concentration of xenon is a technique for light-shifting and facilitates the detection of the liquid argon scintillation light. In this paper, we present the results of the first do** test ever performed in a kiloton-scale LArTPC. From February to May 2020, we carried out this special run in the single-phase DUNE Far Detector prototype (ProtoDUNE-SP) at CERN, featuring 770 t of total liquid argon mass with 410 t of fiducial mass. The goal of the run was to measure the light and charge response of the detector to the addition of xenon, up to a concentration of 18.8 ppm. The main purpose was to test the possibility for reduction of non-uniformities in light collection, caused by deployment of photon detectors only within the anode planes. Light collection was analysed as a function of the xenon concentration, by using the pre-existing photon detection system (PDS) of ProtoDUNE-SP and an additional smaller set-up installed specifically for this run. In this paper we first summarize our current understanding of the argon-xenon energy transfer process and the impact of the presence of nitrogen in argon with and without xenon dopant. We then describe the key elements of ProtoDUNE-SP and the injection method deployed. Two dedicated photon detectors were able to collect the light produced by xenon and the total light. The ratio of these components was measured to be about 0.65 as 18.8 ppm of xenon were injected. We performed studies of the collection efficiency as a function of the distance between tracks and light detectors, demonstrating enhanced uniformity of response for the anode-mounted PDS. We also show that xenon do** can substantially recover light losses due to contamination of the liquid argon by nitrogen. △ Less

Submitted 9 February, 2024; v1 submitted 2 February, 2024; originally announced February 2024.

Comments: 35 pages, 20 figures

Report number: CERN-EP-2024-024; FERMILAB-PUB-23-0819-LBNF

The DUNE Far Detector Vertical Drift Technology, Technical Design Report

Authors: DUNE Collaboration, A. Abed Abud, B. Abi, R. Acciarri, M. A. Acero, M. R. Adames, G. Adamov, M. Adamowski, D. Adams, M. Adinolfi, C. Adriano, A. Aduszkiewicz, J. Aguilar, B. Aimard, F. Akbar, K. Allison, S. Alonso Monsalve, M. Alrashed, A. Alton, R. Alvarez, H. Amar, P. Amedo, J. Anderson, D. A. Andrade, C. Andreopoulos , et al. (1304 additional authors not shown)

Abstract: DUNE is an international experiment dedicated to addressing some of the questions at the forefront of particle physics and astrophysics, including the mystifying preponderance of matter over antimatter in the early universe. The dual-site experiment will employ an intense neutrino beam focused on a near and a far detector as it aims to determine the neutrino mass hierarchy and to make high-precisi… ▽ More DUNE is an international experiment dedicated to addressing some of the questions at the forefront of particle physics and astrophysics, including the mystifying preponderance of matter over antimatter in the early universe. The dual-site experiment will employ an intense neutrino beam focused on a near and a far detector as it aims to determine the neutrino mass hierarchy and to make high-precision measurements of the PMNS matrix parameters, including the CP-violating phase. It will also stand ready to observe supernova neutrino bursts, and seeks to observe nucleon decay as a signature of a grand unified theory underlying the standard model. The DUNE far detector implements liquid argon time-projection chamber (LArTPC) technology, and combines the many tens-of-kiloton fiducial mass necessary for rare event searches with the sub-centimeter spatial resolution required to image those events with high precision. The addition of a photon detection system enhances physics capabilities for all DUNE physics drivers and opens prospects for further physics explorations. Given its size, the far detector will be implemented as a set of modules, with LArTPC designs that differ from one another as newer technologies arise. In the vertical drift LArTPC design, a horizontal cathode bisects the detector, creating two stacked drift volumes in which ionization charges drift towards anodes at either the top or bottom. The anodes are composed of perforated PCB layers with conductive strips, enabling reconstruction in 3D. Light-trap-style photon detection modules are placed both on the cryostat's side walls and on the central cathode where they are optically powered. This Technical Design Report describes in detail the technical implementations of each subsystem of this LArTPC that, together with the other far detector modules and the near detector, will enable DUNE to achieve its physics goals. △ Less

Submitted 5 December, 2023; originally announced December 2023.

Comments: 425 pages; 281 figures Central editing team: A. Heavey, S. Kettell, A. Marchionni, S. Palestini, S. Rajogopalan, R. J. Wilson

Report number: Fermilab Report no: TM-2813-LBNF

Record Photon Information Efficiency with Optical Clock Transmission and Recovery of 12.5 bits/photon over an Optical Channel with 77 dB Loss

Authors: René-Jean Essiambre, Cheng Guo, Sai Kanth Dacha, Alexei Ashikhmin, Andrea Blanco-Redondo, Frank R. Kschischang, Konrad Banaszek, Matthew Weiner, Rose Kopf, Ian Crawley, Mohamad H. Idjadi, Ayed A. Sayem, Jie Zhao, James D. Sandoz, Nicolas Fontaine, Nicole Menkart, Roland Ryf, John Cloonan, Michael Vasilyev, Thomas E. Murphy, Ellsworth C. Burrows

Abstract: We experimentally demonstrate optical detection at 12.5~bits per incident photon, 9.4~dB higher than the theoretical limit of conventional coherent detection. A single laser transmits both data and optical clock, undergoes 77~dB of attenuation before quantum detection followed by optical clock and data recovery. We experimentally demonstrate optical detection at 12.5~bits per incident photon, 9.4~dB higher than the theoretical limit of conventional coherent detection. A single laser transmits both data and optical clock, undergoes 77~dB of attenuation before quantum detection followed by optical clock and data recovery. △ Less

Submitted 3 October, 2023; originally announced October 2023.

Strong transient magnetic fields induced by THz-driven plasmons in graphene disks

Authors: Jeong Woo Han, Pavlo Sai, Dmytro But, Ece Uykur, Stephan Winnerl, Gagan Kumar, Matthew L. Chin, Rachael L. Myers-Ward, Matthew T. Dejarld, Kevin M. Daniels, Thomas E. Murphy, Wojciech Knap, Martin Mittendorff

Abstract: Strong circularly polarized excitation opens up the possibility to generate and control effective magnetic fields in solid state systems, e.g., via the optical inverse Faraday effect or the phonon inverse Faraday effect. While these effects rely on material properties that can be tailored only to a limited degree, plasmonic resonances can be fully controlled by choosing proper dimensions and carri… ▽ More Strong circularly polarized excitation opens up the possibility to generate and control effective magnetic fields in solid state systems, e.g., via the optical inverse Faraday effect or the phonon inverse Faraday effect. While these effects rely on material properties that can be tailored only to a limited degree, plasmonic resonances can be fully controlled by choosing proper dimensions and carrier concentrations. Plasmon resonances provide new degrees of freedom that can be used to tune or enhance the light-induced magnetic field in engineered metamaterials. Here we employ graphene disks to demonstrate light-induced transient magnetic fields from a plasmonic circular current with extremely high efficiency. The effective magnetic field at the plasmon resonance frequency of the graphene disks (3.5 THz) is evidenced by a strong (~1°) ultrafast Faraday rotation (~ 20 ps). In accordance with reference measurements and simulations, we estimated the strength of the induced magnetic field to be on the order of 0.7 T under a moderate pump fluence of about 440 nJ cm-2. △ Less

Submitted 10 July, 2023; originally announced July 2023.

Journal ref: Nature Communications 14, 7493 (2023)

A limit on variations in the fine-structure constant from spectra of nearby Sun-like stars

Authors: Michael T. Murphy, Daniel A. Berke, Fan Liu, Chris Flynn, Christian Lehmann, Vladimir A. Dzuba, Victor V. Flambaum

Abstract: The fine structure constant, $α$, sets the strength of the electromagnetic force. The Standard Model of particle physics provides no explanation for its value, which could potentially vary. The wavelengths of stellar absorption lines depend on $α$, but are subject to systematic effects owing to astrophysical processes in stellar atmospheres. We measured precise line wavelengths using 17 stars, sel… ▽ More The fine structure constant, $α$, sets the strength of the electromagnetic force. The Standard Model of particle physics provides no explanation for its value, which could potentially vary. The wavelengths of stellar absorption lines depend on $α$, but are subject to systematic effects owing to astrophysical processes in stellar atmospheres. We measured precise line wavelengths using 17 stars, selected to have almost identical atmospheric properties to those of the Sun (solar twins), which reduces those systematic effects. We found that $α$ varies by $\lesssim$50 parts-per-billion (ppb) within 50 parsecs from Earth. Combining the results from all 17 stars provides an empirical, local reference for stellar measurements of $α$ with an ensemble precision of 12 ppb. △ Less

Submitted 9 November, 2022; originally announced November 2022.

Comments: 33 pages, 6 figures. Published in Science (11 November 2022). This is the accepted version which includes 20 pages of Supplementary Materials

Probing Galactic variations in the fine-structure constant using solar twin stars: systematic errors

Authors: Daniel A. Berke, Michael T. Murphy, Chris Flynn, Fan Liu

Abstract: Sun-like stars are a new probe of variations in the fine-structure constant, $α$, via the solar twins approach: velocity separations of close pairs of absorption lines are compared between stars with very similar stellar parameters, i.e. effective temperature, metallicity and surface gravity within 100K, 0.1 dex and 0.2 dex of the Sun's values. Here we assess possible systematic errors in this app… ▽ More Sun-like stars are a new probe of variations in the fine-structure constant, $α$, via the solar twins approach: velocity separations of close pairs of absorption lines are compared between stars with very similar stellar parameters, i.e. effective temperature, metallicity and surface gravity within 100K, 0.1 dex and 0.2 dex of the Sun's values. Here we assess possible systematic errors in this approach by analysing $\gtrsim$10,000 archival exposures from the High-Accuracy Radial velocity Planetary Searcher (HARPS) of 130 stars covering a much broader range of stellar parameters. We find that each transition pair's separation shows broad, low-order variations with stellar parameters which can be accurately modelled, leaving only a small residual, intrinsic star-to-star scatter of 0-33 m/s (average $\approx$7 m/s, $\approx$10$^{-4}$Å at 5000Å). This limits the precision available from a single pair in one star. We consider potential systematic errors from a range of instrumental and astrophysical sources (e.g. wavelength calibration, charge transfer inefficiency, stellar magnetic activity, line blending) and conclude that variations in elemental abundances, isotope ratios and stellar rotational velocities may explain this star-to-star scatter. Finally, we find that the solar twins approach can be extended to solar analogues - within 300K, 0.3 dex and 0.4 dex of the Sun's parameters - without significant additional systematic errors, allowing a much larger number of stars to be used as probes of variation in $α$, including at much larger distances. △ Less

Submitted 15 October, 2022; originally announced October 2022.

Comments: 18 pages, 12 figures. Accepted by MNRAS. The VarConLib (Varying Constants Library) software used in this work is available at https://github.com/DBerke/varconlib. The measurements and results in this work are available at https://github.com/DBerke/Berke_et_alia_2022_supplemental_data

Probing Galactic variations in the fine-structure constant using solar twin stars: methodology and results

Authors: Daniel A. Berke, Michael T. Murphy, Chris Flynn, Fan Liu

Abstract: The rich absorption spectra of Sun-like stars are enticing probes for variations in the fine-structure constant, $α$, which gauges the strength of electromagnetism. While individual line wavelengths are sensitive to $α$, they are also sensitive to physical processes in the stellar atmospheres, which has precluded their use so far. Here we demonstrate a new, differential approach using solar twins:… ▽ More The rich absorption spectra of Sun-like stars are enticing probes for variations in the fine-structure constant, $α$, which gauges the strength of electromagnetism. While individual line wavelengths are sensitive to $α$, they are also sensitive to physical processes in the stellar atmospheres, which has precluded their use so far. Here we demonstrate a new, differential approach using solar twins: velocity separations between close pairs of transitions are compared across stars with very similar physical properties, strongly suppressing astrophysical and instrumental systematic errors. We utilise 423 archival exposures of 18 solar twins from the High-Accuracy Radial velocity Planetary Searcher (HARPS), in which calibration errors can be reduced to $\lesssim$3 m/s. For stars with $\approx$10 high signal-to-noise ratio spectra ($\ge$200 per pixel), velocity separations between pairs are measured with $\approx$10 m/s statistical precision. A companion paper assesses a range of systematic error sources using 130 stars, with a greater range of stellar parameters, providing accurate corrections for astrophysical effects and a residual, intrinsic star-to-star scatter of 0-13 m/s. Within these uncertainties, we find no evidence for velocity separation differences in 17 transition pairs between solar twins. In a second companion paper, this is found to limit local ($\lesssim$50 pc) variations in $α$ to $\approx$50 parts per billion, $\sim$2 orders of magnitude less than other Galactic constraints. △ Less

Submitted 15 October, 2022; originally announced October 2022.

Comments: 15 pages, 5 figures. Accepted by MNRAS. The VarConLib (Varying Constants Library) software used in this work is available at https://github.com/DBerke/varconlib. The measurements and results in this work are available at https://github.com/DBerke/Berke_et_alia_2022_supplemental_data

Dark Current and Single Photon Detection by 1550nm Avalanche Photodiodes: Dead Time Corrected Probability Distributions and Entropy Rates

Authors: Nicole Menkart, Joseph D. Hart, Thomas E. Murphy, Rajarshi Roy

Abstract: Single photon detectors have dark count rates that depend strongly on the bias level for detector operation. In the case of weak light sources such as novel lasers or single-photon emitters, the rate of counts due to the light source can be comparable to that of the detector dark counts. In such cases, a characterization of the statistical properties of the dark counts is necessary. The dark count… ▽ More Single photon detectors have dark count rates that depend strongly on the bias level for detector operation. In the case of weak light sources such as novel lasers or single-photon emitters, the rate of counts due to the light source can be comparable to that of the detector dark counts. In such cases, a characterization of the statistical properties of the dark counts is necessary. The dark counts are often assumed to follow a Poisson process that is statistically independent of the incident photon counts. This assumption must be validated for specific types of photodetectors. In this work, we focus on single-photon avalanche photodiodes (SPADs) made for 1550nm. For the InGaAs detectors used, we find the measured distributions often differ significantly from Poisson due to the presence of dead time and afterpulsing with the difference increasing with the bias level. When the dead time is increased to remove the effects of afterpulsing, it is necessary to correct the measured distributions for the effects of the dead time. To this end, we apply an iterative algorithm to remove dead time effects from the probability distribution for dark counts as well as for the case where light from an external weak laser source (known to be Poisson) is detected together with the dark counts. We believe this to be the first instance of the comprehensive application of this algorithm to real data and find that the corrected probability distributions are Poisson distributions in both cases. We additionally use the Grassberger-Procaccia algorithm to estimate the entropy production rates of the dark count processes, which provides a single metric that characterizes the temporal correlations between dark counts as well as the shape of the distribution. We have thus developed a systematic procedure for taking data with 1550nm SPADs and obtaining accurate photocount statistics to examine novel light sources. △ Less

Submitted 4 October, 2022; originally announced October 2022.

Comments: 14 pages, 8 figures

Evidence of Kardar-Parisi-Zhang scaling on a digital quantum simulator

Authors: Nathan Keenan, Niall Robertson, Tara Murphy, Sergiy Zhuk, John Goold

Abstract: Understanding how hydrodynamic behaviour emerges from the unitary evolution of the many-particle Schrödinger equation is a central goal of non-equilibrium statistical mechanics. In this work we implement a digital simulation of the discrete time quantum dynamics of a spin-$\frac{1}{2}$ XXZ spin chain on a noisy near-term quantum device, and we extract the high temperature transport exponent at the… ▽ More Understanding how hydrodynamic behaviour emerges from the unitary evolution of the many-particle Schrödinger equation is a central goal of non-equilibrium statistical mechanics. In this work we implement a digital simulation of the discrete time quantum dynamics of a spin-$\frac{1}{2}$ XXZ spin chain on a noisy near-term quantum device, and we extract the high temperature transport exponent at the isotropic point. We simulate the temporal decay of the relevant spin correlation function at high temperature using a pseudo-random state generated by a random circuit that is specifically tailored to the ibmq-montreal $27$ qubit device. The resulting output is a spin excitation on a highly inhomogeneous background. From the subsequent discrete time dynamics on the device we are able to extract an anomalous super-diffusive exponent consistent with the conjectured Kardar-Parisi-Zhang (KPZ) scaling at the isotropic point. Furthermore we simulate the restoration of spin diffusion with the application of an integrability breaking potential. △ Less

Submitted 15 October, 2022; v1 submitted 25 August, 2022; originally announced August 2022.

Comments: 7 pages, 6 Figures

Journal ref: npj Quantum Inf 9, 72 (2023)

Relativistic frequency shifts in Cr, Ti, Fe, Ni, Ca, Na, and V to search for variation in the fine structure constant

Authors: V. A. Dzuba, V. V. Flambaum, M. T. Murphy, D. A. Berke

Abstract: Sensitivity of the frequencies of twenty two atomic transitions to the variation of the fine structure constant $α$ is calculated. The findings are to be used in search for possible variation of $α$ across our Galaxy using high quality spectroscopic data for stars similar to our Sun. Sensitivity of the frequencies of twenty two atomic transitions to the variation of the fine structure constant $α$ is calculated. The findings are to be used in search for possible variation of $α$ across our Galaxy using high quality spectroscopic data for stars similar to our Sun. △ Less

Submitted 31 March, 2022; originally announced April 2022.

Comments: 4 pages, 2 tables

First measurement of the $^{10}{\rm B}(α,n)^{13}{\rm N}$ reaction in an inertial confinement fusion implosion at the National Ignition Facility: Initial steps toward the development of a radiochemistry mix diagnostic

Authors: D. Lonardoni, J. P. Sauppe, S. H. Batha, N. Birge, T. Bredeweg, M. Freeman, V. Geppert-Kleinrath, M. E. Gooden, A. C. Hayes, H. Huang, G. Jungman, B. D. Keenan, L. Kot, K. D. Meaney, T. Murphy, C. Velsko, C. B. Yeamans, H. D. Whitley, C. Wilde, J. B. Wilhelmy

Abstract: We report the first measurement of the $^{10}{\rm B}(α,n)^{13}{\rm N}$ reaction in a polar-direct-drive exploding pusher (PDXP) at the National Ignition Facility (NIF). This work is motivated by the need to develop alternative mix diagnostics, radiochemistry being the focus here. The target is composed of a $65/35\,\rm at.\,\%$ deuterium-tritium (DT) fill surrounded by a roughly $30\,μ\rm m$ thick… ▽ More We report the first measurement of the $^{10}{\rm B}(α,n)^{13}{\rm N}$ reaction in a polar-direct-drive exploding pusher (PDXP) at the National Ignition Facility (NIF). This work is motivated by the need to develop alternative mix diagnostics, radiochemistry being the focus here. The target is composed of a $65/35\,\rm at.\,\%$ deuterium-tritium (DT) fill surrounded by a roughly $30\,μ\rm m$ thick beryllium ablator. The inner portion of the beryllium ablator is doped with $10\,\rm at.\,\%$ of $^{10}{\rm B}$. Radiation-hydrodynamics calculations were performed in 1D to optimize both the remaining boron rho-R and the DT neutron yield. A charged-particle transport post-processor has been developed to study $α$-induced reactions on the ablator material. Results indicate a large $^{13}{\rm N}$ production from $α$-induced reactions on $^{10}{\rm B}$, measurable by the radiochemical analysis of gaseous samples system at the NIF. The PDXP target N201115-001 was successfully fielded on the NIF, and nitrogen from the $^{10}{\rm B}(α,n)^{13}{\rm N}$ reaction was measured. The $^{13}{\rm N}$ production yield, as well as the DT neutron yield, was, however, lower than expected. Some of the reduced yields can be explained by the oblate shape, but the ratios of the various radiochemical signals are not commensurate with expectations based on a simple reduction of the 1D results. Preliminary 2D radiation-hydrodynamics computations are consistent with the experimental measurements, and work is ongoing to extend the radiochemistry analysis into higher dimensions. △ Less

Submitted 17 May, 2022; v1 submitted 18 November, 2021; originally announced November 2021.

Comments: 12 pages, 9 figures, 4 tables

Report number: LA-UR-21-30239

Experiments conducted in the burning plasma regime with inertial fusion implosions

Authors: J. S. Ross, J. E. Ralph, A. B. Zylstra, A. L. Kritcher, H. F. Robey, C. V. Young, O. A. Hurricane, D. A. Callahan, K. L. Baker, D. T. Casey, T. Doeppner, L. Divol, M. Hohenberger, S. Le Pape, A. Pak, P. K. Patel, R. Tommasini, S. J. Ali, P. A. Amendt, L. J. Atherton, B. Bachmann, D. Bailey, L. R. Benedetti, L. Berzak Hopkins, R. Betti , et al. (127 additional authors not shown)

Abstract: An experimental program is currently underway at the National Ignition Facility (NIF) to compress deuterium and tritium (DT) fuel to densities and temperatures sufficient to achieve fusion and energy gain. The primary approach being investigated is indirect drive inertial confinement fusion (ICF), where a high-Z radiation cavity (a hohlraum) is heated by lasers, converting the incident energy into… ▽ More An experimental program is currently underway at the National Ignition Facility (NIF) to compress deuterium and tritium (DT) fuel to densities and temperatures sufficient to achieve fusion and energy gain. The primary approach being investigated is indirect drive inertial confinement fusion (ICF), where a high-Z radiation cavity (a hohlraum) is heated by lasers, converting the incident energy into x-ray radiation which in turn drives the DT fuel filled capsule causing it to implode. Previous experiments reported DT fuel gain exceeding unity [O.A. Hurricane et al., Nature 506, 343 (2014)] and then exceeding the kinetic energy of the imploding fuel [S. Le Pape et al., Phys. Rev. Lett. 120, 245003 (2018)]. We report on recent experiments that have achieved record fusion neutron yields on NIF, greater than 100 kJ with momentary fusion powers exceeding 1PW, and have for the first time entered the burning plasma regime where fusion alpha-heating of the fuel exceeds the energy delivered to the fuel via compression. This was accomplished by increasing the size of the high-density carbon (HDC) capsule, increasing energy coupling, while controlling symmetry and implosion design parameters. Two tactics were successful in controlling the radiation flux symmetry and therefore the implosion symmetry: transferring energy between laser cones via plasma waves, and changing the shape of the hohlraum. In conducting these experiments, we controlled for known sources of degradation. Herein we show how these experiments were performed to produce record performance, and demonstrate the data fidelity leading us to conclude that these shots have entered the burning plasma regime. △ Less

Submitted 8 November, 2021; originally announced November 2021.

Calibrating COVID-19 SEIR models with time-varying effective contact rates

Authors: James P. Gleeson, Thomas Brendan Murphy, Joseph D. O'Brien, Nial Friel, Norma Bargary, David J. P. O'Sullivan

Abstract: We describe the population-based SEIR (susceptible, exposed, infected, removed) model developed by the Irish Epidemiological Modelling Advisory Group (IEMAG), which advises the Irish government on COVID-19 responses. The model assumes a time-varying effective contact rate (equivalently, a time-varying reproduction number) to model the effect of non-pharmaceutical interventions. A crucial technical… ▽ More We describe the population-based SEIR (susceptible, exposed, infected, removed) model developed by the Irish Epidemiological Modelling Advisory Group (IEMAG), which advises the Irish government on COVID-19 responses. The model assumes a time-varying effective contact rate (equivalently, a time-varying reproduction number) to model the effect of non-pharmaceutical interventions. A crucial technical challenge in applying such models is their accurate calibration to observed data, e.g., to the daily number of confirmed new cases, as the past history of the disease strongly affects predictions of future scenarios. We demonstrate an approach based on inversion of the SEIR equations in conjunction with statistical modelling and spline-fitting of the data, to produce a robust methodology for calibration of a wide class of models of this type. △ Less

Submitted 8 June, 2021; originally announced June 2021.

Journal ref: Phil. Trans. R. Soc. A 380: 20210120. (2021)

The mobile phone as a free-rotation laboratory

Authors: Michael S. Wheatland, Tara Murphy, Daniel Naoumenko, Daan van Schijndel, Georgio Katsifis

Abstract: Modern mobile phones contain a three-axis microelectromechanical system (MEMS) gyroscope, capable of taking accurate measurements of the angular velocity along the three principal axes of the phone with a sampling rate of 100 Hz or better. If the phone is tossed in the air, then, neglecting air resistance, it is in free rotation (rotation in the absence of a torque) with respect to its centre of m… ▽ More Modern mobile phones contain a three-axis microelectromechanical system (MEMS) gyroscope, capable of taking accurate measurements of the angular velocity along the three principal axes of the phone with a sampling rate of 100 Hz or better. If the phone is tossed in the air, then, neglecting air resistance, it is in free rotation (rotation in the absence of a torque) with respect to its centre of mass, and the phone's gyroscope can be used to record the rotational dynamics. This enables experimental investigation of free rotation. In this paper, we use a mobile phone to demonstrate the steady states for rotation of the phone about two of its principal axes, and the instability in rotation about the third corresponding to the intermediate moment of inertia. We also show the approximate conservation of angular momentum and rotational kinetic energy during motion in the air, and compare the data with numerical solution of Euler's equations for free rotation. Our results demonstrate the capability of smartphones for investigating free rotation, and should be of interest to college and university teachers develo** "at home" physics labs for remote learning. △ Less

Submitted 3 November, 2020; originally announced November 2020.

Comments: 18 pages, 7 figures. Accepted for publication in the American Journal of Physics

Control of hot-carrier relaxation time in Au-Ag thin films through alloying

Authors: Sarvenaz Memarzadeh, Kevin J. Palm, Thomas E. Murphy, Marina S. Leite, Jeremy N. Munday

Abstract: The plasmon resonance of a structure is primarily dictated by its optical properties and geometry, which can be modified to enable hot-carrier photodetectors with superior performance. Recently, metal-alloys have played a prominent role in tuning the resonance of plasmonic structures through chemical composition engineering. However, it has been unclear how alloying modifies the time dynamics of g… ▽ More The plasmon resonance of a structure is primarily dictated by its optical properties and geometry, which can be modified to enable hot-carrier photodetectors with superior performance. Recently, metal-alloys have played a prominent role in tuning the resonance of plasmonic structures through chemical composition engineering. However, it has been unclear how alloying modifies the time dynamics of generated hot-carriers. In this work, we elucidate the role of chemical composition on the relaxation time of hot-carriers for the archetypal Aux Ag1-x thin-film system. Through time-resolved optical spectroscopy measurements in the visible wavelength range, we measure composition-dependent relaxation times that vary up to 8x for constant pump fluency. Surprisingly, we find that the addition of 2% of Ag into Au films can increase the hot carrier lifetime by approximately 35% under fixed fluence, as a result of a decrease in optical loss. Further, the relaxation time is found to be inversely proportional to the imaginary part of the permittivity. Our results indicate that alloying is a promising approach to effectively control hot-carrier relaxation time in metals. △ Less

Submitted 30 July, 2020; originally announced July 2020.

Spatiotemporal Characterization of Nonlinear Interactions between Selectively Excited Radially Symmetric Modes of a Few-Mode Fiber

Authors: Sai Kanth Dacha, Thomas E. Murphy

Abstract: Nonlinear propagation of signals in single-mode fiber is well understood, and is typically observed by measuring the temporal profile or optical spectrum of an emerging signal. In multimode fibers, the nonlinearity has both a spatial and a temporal element, and a complete investigation of the interactions between propagating modes requires resolving the output in both space and time. We report her… ▽ More Nonlinear propagation of signals in single-mode fiber is well understood, and is typically observed by measuring the temporal profile or optical spectrum of an emerging signal. In multimode fibers, the nonlinearity has both a spatial and a temporal element, and a complete investigation of the interactions between propagating modes requires resolving the output in both space and time. We report here spatiotemporal measurements of two nonlinear interacting LP$_{0m}$ modes of a step-index few-mode fiber (FMF). We describe a method to selectively excite two propagating modes through the use of a phase-mask directly patterned on the entrance face of the fiber. The output is resolved by raster-scanning a near-field tapered single-mode optical fiber probe that is connected to a high-speed detector. The results show that in the presence of nonlinearity, the output exhibits a spatiotemporal character that cannot be adequately characterized by a camera image or pulse shape alone. △ Less

Submitted 18 August, 2020; v1 submitted 30 April, 2020; originally announced May 2020.

Comments: About 11 pages, 8 figures, in submission process for Optics journal

Deep Agent: Studying the Dynamics of Information Spread and Evolution in Social Networks

Authors: Ivan Garibay, Toktam A. Oghaz, Niloofar Yousefi, Ece C. Mutlu, Madeline Schiappa, Steven Scheinert, Georgios C. Anagnostopoulos, Christina Bouwens, Stephen M. Fiore, Alexander Mantzaris, John T. Murphy, William Rand, Anastasia Salter, Mel Stanfill, Gita Sukthankar, Nisha Baral, Gabriel Fair, Chathika Gunaratne, Neda B. Hajiakhoond, Jasser Jasser, Chathura Jayalath, Olivia Newton, Samaneh Saadat, Chathurani Senevirathna, Rachel Winter , et al. (1 additional authors not shown)

Abstract: This paper explains the design of a social network analysis framework, developed under DARPA's SocialSim program, with novel architecture that models human emotional, cognitive and social factors. Our framework is both theory and data-driven, and utilizes domain expertise. Our simulation effort helps in understanding how information flows and evolves in social media platforms. We focused on modeli… ▽ More This paper explains the design of a social network analysis framework, developed under DARPA's SocialSim program, with novel architecture that models human emotional, cognitive and social factors. Our framework is both theory and data-driven, and utilizes domain expertise. Our simulation effort helps in understanding how information flows and evolves in social media platforms. We focused on modeling three information domains: cryptocurrencies, cyber threats, and software vulnerabilities for the three interrelated social environments: GitHub, Reddit, and Twitter. We participated in the SocialSim DARPA Challenge in December 2018, in which our models were subjected to extensive performance evaluation for accuracy, generalizability, explainability, and experimental power. This paper reports the main concepts and models, utilized in our social media modeling effort in develo** a multi-resolution simulation at the user, community, population, and content levels. △ Less

Submitted 29 May, 2021; v1 submitted 25 March, 2020; originally announced March 2020.

Comments: 16 pages

Guiding and confining of light in a two-dimensional synthetic space using electric fields

Authors: Hamidreza Chalabi, Sabyasachi Barik, Sunil Mittal, Thomas E. Murphy, Mohammad Hafezi, Edo Waks

Abstract: Synthetic dimensions provide a promising platform for photonic quantum simulations. Manipulating the flow of photons in these dimensions requires an electric field. However, photons do not have charge and do not directly interact with electric fields. Therefore, alternative approaches are needed to realize electric fields in photonics. One approach is to use engineered gauge fields that can mimic… ▽ More Synthetic dimensions provide a promising platform for photonic quantum simulations. Manipulating the flow of photons in these dimensions requires an electric field. However, photons do not have charge and do not directly interact with electric fields. Therefore, alternative approaches are needed to realize electric fields in photonics. One approach is to use engineered gauge fields that can mimic the effect of electric fields and produce the same dynamical behavior. Here, we demonstrate such an electric field for photons propagating in a two-dimensional synthetic space. We achieve this using a linearly time-varying gauge field generated by direction-dependent phase modulations. We show that the generated electric field leads to Bloch oscillations and the revival of the state after a certain number of steps dependent on the field strength. We measure the probability of the revival and demonstrate good agreement between the observed values and the theoretically predicted results. Furthermore, by applying a nonuniform electric field, we show the possibility of waveguiding photons. Ultimately, our results open up new opportunities for manipulating the propagation of photons with potential applications in photonic quantum simulations. △ Less

Submitted 17 December, 2019; v1 submitted 23 November, 2019; originally announced November 2019.

Surface Plasmon Assisted Control of Hot-Electron Relaxation Time

Authors: Sarvenaz Memarzadeh, Jongbum Kim, Yigit Aytac, Thomas E. Murphy, Jeremy N. Munday

Abstract: Surface plasmon mediated hot carrier generation is widely utilized for the manipulation of the electron-photon interactions in many types of optoelectronic devices including solar cells, photodiodes, and optical modulators. A diversity of plasmonic systems such as nanoparticles, resonators, and waveguides have been introduced to enhance hot carrier generation; however, the impact of the propagatin… ▽ More Surface plasmon mediated hot carrier generation is widely utilized for the manipulation of the electron-photon interactions in many types of optoelectronic devices including solar cells, photodiodes, and optical modulators. A diversity of plasmonic systems such as nanoparticles, resonators, and waveguides have been introduced to enhance hot carrier generation; however, the impact of the propagating surface plasmons on hot carrier lifetime has not been clearly demonstrated. Here, we systematically study the hot carrier relaxation in thin film gold (Au) samples under surface plasmon coupling with the Kretschmann configuration. We observe that the locally confined electric field at the surface of the metal significantly affects the hot carrier distribution and electron temperature, which results in a slowing of the hot electrons relaxation time, regardless of the average value of the absorbed power in the Au thin film. This result could be extended to other plasmonic nanostructures, enabling the control of hot carrier lifetimes throughout the optical frequency range. △ Less

Submitted 20 November, 2019; originally announced November 2019.

Optical Control of Chiral Charge Pum** in a Topological Weyl Semimetal

Authors: M. Mehdi Jadidi, Mehdi Kargarian, Martin Mittendorff, Yigit Aytac, Bing Shen, Jacob C. König-Otto, Stephan Winnerl, Ni Ni, Alexander L. Gaeta, Thomas E. Murphy, H. Dennis Drew

Abstract: Solids with topologically robust electronic states exhibit unusual electronic and optical transport properties that do not exist in other materials. A particularly interesting example is chiral charge pum**, the so-called chiral anomaly, in recently discovered topological Weyl semimetals, where simultaneous application of parallel DC electric and magnetic fields creates an imbalance in the numbe… ▽ More Solids with topologically robust electronic states exhibit unusual electronic and optical transport properties that do not exist in other materials. A particularly interesting example is chiral charge pum**, the so-called chiral anomaly, in recently discovered topological Weyl semimetals, where simultaneous application of parallel DC electric and magnetic fields creates an imbalance in the number of carriers of opposite topological charge (chirality). Here, using time-resolved terahertz measurements on the Weyl semimetal TaAs in a magnetic field, we optically interrogate the chiral anomaly by dynamically pum** the chiral charges and monitoring their subsequent relaxation. Theory based on Boltzmann transport shows that the observed effects originate from an optical nonlinearity in the chiral charge pum** process. Our measurements reveal that the chiral population relaxation time is much greater than 1 ns. The observation of terahertz-controlled chiral carriers with long coherence times and topological protection suggests the application of Weyl semimetals for quantum optoelectronic technology. △ Less

Submitted 6 May, 2019; originally announced May 2019.

Journal ref: Phys. Rev. B 102, 245123 (2020)

A synthetic gauge field for two-dimensional time-multiplexed quantum random walks

Authors: Hamidreza Chalabi, Sabyasachi Barik, Sunil Mittal, Thomas E. Murphy, Mohammad Hafezi, Edo Waks

Abstract: Temporal multiplexing provides an efficient and scalable approach to realize a quantum random walk with photons that can exhibit topological properties. But two dimensional time-multiplexed topological quantum walks studied so far have relied on generalizations of the Su-Shreiffer-Heeger (SSH) model with no synthetic gauge field. In this work, we demonstrate a 2D topological quantum random walk wh… ▽ More Temporal multiplexing provides an efficient and scalable approach to realize a quantum random walk with photons that can exhibit topological properties. But two dimensional time-multiplexed topological quantum walks studied so far have relied on generalizations of the Su-Shreiffer-Heeger (SSH) model with no synthetic gauge field. In this work, we demonstrate a 2D topological quantum random walk where the non-trivial topology is due to the presence of a synthetic gauge field. We show that the synthetic gauge field leads to the appearance of multiple bandgaps and consequently, a spatial confinement of the random walk distribution. Moreover, we demonstrate topological edge states at an interface between domains with opposite synthetic fields. Our results expand the range of Hamiltonians that can be simulated using photonic random walks. △ Less

Submitted 17 February, 2019; originally announced February 2019.

Journal ref: Phys. Rev. Lett. 123, 150503 (2019)

Experiments with arbitrary networks in time-multiplexed delay systems

Authors: Joseph D. Hart, Don C. Schmadel, Thomas E. Murphy, Rajarshi Roy

Abstract: We report a new experimental approach using an optoelectronic feedback loop to investigate the dynamics of oscillators coupled on large complex networks with arbitrary topology. Our implementation is based on a single optoelectronic feedback loop with time delays. We use the space-time interpretation of systems with time delay to create large networks of coupled maps. Others have performed similar… ▽ More We report a new experimental approach using an optoelectronic feedback loop to investigate the dynamics of oscillators coupled on large complex networks with arbitrary topology. Our implementation is based on a single optoelectronic feedback loop with time delays. We use the space-time interpretation of systems with time delay to create large networks of coupled maps. Others have performed similar experiments using high-pass filters to implement the coupling; this restricts the network topology to the coupling of only a few nearest neighbors. In our experiment, the time delays and coupling are implemented on a field-programmable gate array, allowing the creation of networks with arbitrary coupling topology. This system has many advantages: the network nodes are truly identical, the network is easily reconfigurable, and the network dynamics occur at high speeds. We use this system to study cluster synchronization and chimera states in both small and large networks of different topologies. △ Less

Submitted 21 December, 2017; v1 submitted 7 December, 2017; originally announced December 2017.

Recommendations and illustrations for the evaluation of photonic random number generators

Authors: Joseph D. Hart, Yuta Terashima, Atsushi Uchida, Gerald B. Baumgartner, Thomas E. Murphy, Rajarshi Roy

Abstract: The never-ending quest to improve the security of digital information combined with recent improvements in hardware technology has caused the field of random number generation to undergo a fundamental shift from relying solely on pseudo-random algorithms to employing optical entropy sources. Despite these significant advances on the hardware side, commonly used statistical measures and evaluation… ▽ More The never-ending quest to improve the security of digital information combined with recent improvements in hardware technology has caused the field of random number generation to undergo a fundamental shift from relying solely on pseudo-random algorithms to employing optical entropy sources. Despite these significant advances on the hardware side, commonly used statistical measures and evaluation practices remain ill-suited to understand or quantify the optical entropy that underlies physical random number generation. We review the state of the art in the evaluation of optical random number generation and recommend a new paradigm: quantifying entropy generation and understanding the physical limits of the optical sources of randomness. In order to do this, we advocate for the separation of the physical entropy source from deterministic post-processing in the evaluation of random number generators and for the explicit consideration of the impact of the measurement and digitization process on the rate of entropy production. We present the Cohen-Procaccia estimate of the entropy rate $h(ε,τ)$ as one way to do this. In order to provide an illustration of our recommendations, we apply the Cohen-Procaccia estimate as well as the entropy estimates from the new NIST draft standards for physical random number generators to evaluate and compare three common optical entropy sources: single photon time-of-arrival detection, chaotic lasers, and amplified spontaneous emission. △ Less

Submitted 15 August, 2017; v1 submitted 13 December, 2016; originally announced December 2016.

Precise limits on cosmological variability of the fine-structure constant with zinc and chromium quasar absorption lines

Authors: Michael T. Murphy, Adrian L. Malec, J. Xavier Prochaska

Abstract: The strongest transitions of Zn and CrII are the most sensitive to relative variations in the fine-structure constant ($Δα/α$) among the transitions commonly observed in quasar absorption spectra. They also lie within just 40Å of each other (rest frame), so they are resistant to the main systematic error affecting most previous measurements of $Δα/α$: long-range distortions of the wavelength calib… ▽ More The strongest transitions of Zn and CrII are the most sensitive to relative variations in the fine-structure constant ($Δα/α$) among the transitions commonly observed in quasar absorption spectra. They also lie within just 40Å of each other (rest frame), so they are resistant to the main systematic error affecting most previous measurements of $Δα/α$: long-range distortions of the wavelength calibration. While Zn and CrII absorption is normally very weak in quasar spectra, we obtained high signal-to-noise, high-resolution echelle spectra from the Keck and Very Large Telescopes of 9 rare systems where it is strong enough to constrain $Δα/α$ from these species alone. These provide 12 independent measurements (3 quasars were observed with both telescopes) at redshifts 1.0--2.4, 11 of which pass stringent reliability criteria. These 11 are all consistent with $Δα/α=0$ within their individual uncertainties of 3.5--13 parts per million (ppm), with a weighted mean $Δα/α= 1.2\pm1.7_{\rm stat}\pm0.9_{\rm sys}$ ppm (1$σ$ statistical and systematic uncertainties), indicating no significant cosmological variations in $α$. This is the first statistical sample of absorbers that is resistant to long-range calibration distortions (at the $<$1 ppm level), with a precision comparable to previous large samples of $\sim$150 (distortion-affected) absorbers. Our systematic error budget is instead dominated by much shorter-range distortions repeated across echelle orders of individual spectra. △ Less

Submitted 2 October, 2016; v1 submitted 20 June, 2016; originally announced June 2016.

Comments: 20 pages, 15 figures. Accepted by MNRAS. Quasar spectra and Zn/CrII absorption profile fits are available at http://dx.doi.org/10.5281/zenodo.51504 . v2: Erratum added (in press at MNRAS), with numerical results and figures updated accordingly; no substantial changes nor any change to conclusions

A new angle for probing field-aligned irregularities with the Murchison Widefield Array

Authors: Shyeh T**g Loi, Tara Murphy, Iver H. Cairns, Cathryn M. Trott, Natasha Hurley-Walker, Lu Feng, Paul J. Hancock, David L. Kaplan

Abstract: Electron density irregularities in the ionosphere are known to be magnetically anisotropic, preferentially elongated along the lines of force. While many studies of their morphology have been undertaken by topside sounding and whistler measurements, it is only recently that detailed regional-scale reconstructions have become possible, enabled by the advent of widefield radio telescopes. Here we pr… ▽ More Electron density irregularities in the ionosphere are known to be magnetically anisotropic, preferentially elongated along the lines of force. While many studies of their morphology have been undertaken by topside sounding and whistler measurements, it is only recently that detailed regional-scale reconstructions have become possible, enabled by the advent of widefield radio telescopes. Here we present a new approach for visualising and studying field-aligned irregularities (FAIs), which involves transforming interferometric measurements of TEC gradients onto a magnetic shell tangent plane. This removes the perspective distortion associated with the oblique viewing angle of the irregularities from the ground, facilitating the decomposition of dynamics along and across magnetic field lines. We apply this transformation to the dataset of Loi et al. [2015a], obtained on 15 October 2013 by the Murchison Widefield Array (MWA) radio telescope and displaying prominent FAIs. We study these FAIs in the new reference frame, quantifying field-aligned and field-transverse behaviour, examining time and altitude dependencies, and extending the analysis to FAIs on sub-array scales. We show that the inclination of the plane can be derived solely from the data, and verify that the best-fit value is consistent with the known magnetic inclination. The ability of the model to concentrate the fluctuations along a single spatial direction may find practical application to future calibration strategies for widefield interferometry, by providing a compact representation of FAI-induced distortions. △ Less

Submitted 20 April, 2016; originally announced April 2016.

Comments: 23 pages, 14 figures, accepted for publication in Radio Science

Density duct formation in the wake of a travelling ionospheric disturbance: Murchison Widefield Array observations

Authors: Shyeh T**g Loi, Iver H. Cairns, Tara Murphy, Philip J. Erickson, Martin E. Bell, Antonia Rowlinson, Balwinder Singh Arora, John Morgan, Ronald D. Ekers, Natasha Hurley-Walker, David L. Kaplan

Abstract: Geomagnetically-aligned density structures with a range of sizes exist in the near-Earth plasma environment, including 10-100 km-wide VLF/HF wave-ducting structures. Their small diameters and modest density enhancements make them difficult to observe, and there is limited evidence for any of the several formation mechanisms proposed to date. We present a case study of an event on 26 August 2014 wh… ▽ More Geomagnetically-aligned density structures with a range of sizes exist in the near-Earth plasma environment, including 10-100 km-wide VLF/HF wave-ducting structures. Their small diameters and modest density enhancements make them difficult to observe, and there is limited evidence for any of the several formation mechanisms proposed to date. We present a case study of an event on 26 August 2014 where a travelling ionospheric disturbance (TID) shortly precedes the formation of a complex collection of field-aligned ducts, using data obtained by the Murchison Widefield Array (MWA) radio telescope. Their spatiotemporal proximity leads us to suggest a causal interpretation. Geomagnetic conditions were quiet at the time, and no obvious triggers were noted. Growth of the structures proceeds rapidly, within 0.5 hr of the passage of the TID, attaining their peak prominence 1-2 hr later and persisting for several more hours until observations ended at local dawn. Analyses of the next two days show field-aligned structures to be preferentially detectable under quiet rather than active geomagnetic conditions. We used a raster scanning strategy facilitated by the speed of electronic beamforming to expand the quasi-instantaneous field of view of the MWA by a factor of three. These observations represent the broadest angular coverage of the ionosphere by a radio telescope to date. △ Less

Submitted 12 January, 2016; originally announced January 2016.

Comments: 15 pages, 14 figures. Accepted for publication in Journal of Geophysical Research: Space Physics

Terahertz Nonlinearity in Graphene Plasmons

Authors: Mohammad M. Jadidi, Jacob C. König-Otto, Stephan Winnerl, Andrei B. Sushkov, H. Dennis Drew, Thomas E. Murphy, Martin Mittendorff

Abstract: Sub-wavelength graphene structures support localized plasmonic resonances in the terahertz and mid-infrared spectral regimes. The strong field confinement at the resonant frequency is predicted to significantly enhance the light-graphene interaction, which could enable nonlinear optics at low intensity in atomically thin, sub-wavelength devices. To date, the nonlinear response of graphene plasmons… ▽ More Sub-wavelength graphene structures support localized plasmonic resonances in the terahertz and mid-infrared spectral regimes. The strong field confinement at the resonant frequency is predicted to significantly enhance the light-graphene interaction, which could enable nonlinear optics at low intensity in atomically thin, sub-wavelength devices. To date, the nonlinear response of graphene plasmons and their energy loss dynamics have not been experimentally studied. We measure and theoretically model the terahertz nonlinear response and energy relaxation dynamics of plasmons in graphene nanoribbons. We employ a THz pump-THz probe technique at the plasmon frequency and observe a strong saturation of plasmon absorption followed by a 10 ps relaxation time. The observed nonlinearity is enhanced by two orders of magnitude compared to unpatterned graphene with no plasmon resonance. We further present a thermal model for the nonlinear plasmonic absorption that supports the experimental results. △ Less

Submitted 23 December, 2015; originally announced December 2015.

Power spectrum analysis of ionospheric fluctuations with the Murchison Widefield Array

Authors: Shyeh T**g Loi, Cathryn M. Trott, Tara Murphy, Iver H. Cairns, Martin Bell, Natasha Hurley-Walker, John Morgan, Emil Lenc, A. R. Offringa, L. Feng, P. J. Hancock, D. L. Kaplan, N. Kudryavtseva, G. Bernardi, J. D. Bowman, F. Briggs, R. J. Cappallo, B. E. Corey, A. A. Deshpande, D. Emrich, B. M. Gaensler, R. Goeke, L. J. Greenhill, B. J. Hazelton, M. Johnston-Hollitt , et al. (23 additional authors not shown)

Abstract: Low-frequency, wide field-of-view (FoV) radio telescopes such as the Murchison Widefield Array (MWA) enable the ionosphere to be sampled at high spatial completeness. We present the results of the first power spectrum analysis of ionospheric fluctuations in MWA data, where we examined the position offsets of radio sources appearing in two datasets. The refractive shifts in the positions of celesti… ▽ More Low-frequency, wide field-of-view (FoV) radio telescopes such as the Murchison Widefield Array (MWA) enable the ionosphere to be sampled at high spatial completeness. We present the results of the first power spectrum analysis of ionospheric fluctuations in MWA data, where we examined the position offsets of radio sources appearing in two datasets. The refractive shifts in the positions of celestial sources are proportional to spatial gradients in the electron column density transverse to the line of sight. These can be used to probe plasma structures and waves in the ionosphere. The regional (10-100 km) scales probed by the MWA, determined by the size of its FoV and the spatial density of radio sources (typically thousands in a single FoV), complement the global (100-1000 km) scales of GPS studies and local (0.01-1 km) scales of radar scattering measurements. Our data exhibit a range of complex structures and waves. Some fluctuations have the characteristics of travelling ionospheric disturbances (TIDs), while others take the form of narrow, slowly-drifting bands aligned along the Earth's magnetic field. △ Less

Submitted 5 June, 2015; originally announced June 2015.

Comments: Accepted for publication in Radio Science

Real-time imaging of density ducts between the plasmasphere and ionosphere

Authors: Shyeh T**g Loi, Tara Murphy, Iver H. Cairns, Frederick W. Menk, Colin L. Waters, Philip J. Erickson, Cathryn M. Trott, Natasha Hurley-Walker, John Morgan, Emil Lenc, Andre R. Offringa, Martin E. Bell, Ronald D. Ekers, B. M. Gaensler, Colin J. Lonsdale, Lu Feng, Paul J. Hancock, David L. Kaplan, G. Bernardi, J. D. Bowman, F. Briggs, R. J. Cappallo, A. A. Deshpande, L. J. Greenhill, B. J. Hazelton , et al. (16 additional authors not shown)

Abstract: Ionization of the Earth's atmosphere by sunlight forms a complex, multi-layered plasma environment within the Earth's magnetosphere, the innermost layers being the ionosphere and plasmasphere. The plasmasphere is believed to be embedded with cylindrical density structures (ducts) aligned along the Earth's magnetic field, but direct evidence for these remains scarce. Here we report the first direct… ▽ More Ionization of the Earth's atmosphere by sunlight forms a complex, multi-layered plasma environment within the Earth's magnetosphere, the innermost layers being the ionosphere and plasmasphere. The plasmasphere is believed to be embedded with cylindrical density structures (ducts) aligned along the Earth's magnetic field, but direct evidence for these remains scarce. Here we report the first direct wide-angle observation of an extensive array of field-aligned ducts bridging the upper ionosphere and inner plasmasphere, using a novel ground-based imaging technique. We establish their heights and motions by feature-tracking and parallax analysis. The structures are strikingly organized, appearing as regularly-spaced, alternating tubes of overdensities and underdensities strongly aligned with the Earth's magnetic field. These findings represent the first direct visual evidence for the existence of such structures. △ Less

Submitted 24 April, 2015; originally announced April 2015.

Comments: Accepted for publication in Geophysical Research Letters

Multiple-view spectrally resolved x-ray imaging observations of polar-direct-drive implosions on OMEGA

Authors: R. C. Mancini, H. M. Johns, T. Joshi, D. Mayes, T. Nagayama, S. C. Hsu, J. A. Baumgaertel, J. Cobble, N. S. Krasheninnikova, P. A. Bradley, P. Hakel, T. J. Murphy, M. J. Schmitt, R. C. Shah, I. L. Tregillis, F. J. Wysocki

Abstract: We present spatially, temporally, and spectrally resolved narrow- and broad-band x-ray images of polar-direct-drive (PDD) implosions on OMEGA. These self-emission images were obtained during the deceleration phase and bang time using several multiple monochromatic x-ray imaging instruments fielded along two or three quasi-orthogonal lines-of-sight including equatorial and polar views. The instrume… ▽ More We present spatially, temporally, and spectrally resolved narrow- and broad-band x-ray images of polar-direct-drive (PDD) implosions on OMEGA. These self-emission images were obtained during the deceleration phase and bang time using several multiple monochromatic x-ray imaging instruments fielded along two or three quasi-orthogonal lines-of-sight including equatorial and polar views. The instruments recorded images based on K-shell lines from a titanium tracer located in the shell as well as continuum emission. These observations constitute the first such data obtained for PDD implosions. The image data show features attributed to zero-order hydrodynamics. Equatorial view synthetic images obtained from post-processing a 2D hydrodynamic simulation are consistent with the experimental observation. Polar view images show a pentagonal pattern that correlates with the PDD laser illumination used on OMEGA, thus revealing a 3D aspect of these experiments not previously observed. △ Less

Submitted 17 June, 2014; originally announced June 2014.

Comments: 22 pages, 10 figures, submitted for publication

Report number: LA-UR-14-23564

Journal ref: Physics of Plasmas 2, 122704 (2014)

Laboratory atomic transition data for precise optical quasar absorption spectroscopy

Authors: Michael T. Murphy, Julian C. Berengut

Abstract: Quasar spectra reveal a rich array of important astrophysical information about galaxies which intersect the quasar line of sight. They also enable tests of the variability of fundamental constants over cosmological time and distance-scales. Key to these endeavours are the laboratory frequencies, isotopic and hyperfine structures of various metal-ion transitions. Here we review and synthesize the… ▽ More Quasar spectra reveal a rich array of important astrophysical information about galaxies which intersect the quasar line of sight. They also enable tests of the variability of fundamental constants over cosmological time and distance-scales. Key to these endeavours are the laboratory frequencies, isotopic and hyperfine structures of various metal-ion transitions. Here we review and synthesize the existing information about these quantities for 43 transitions which are important for measuring possible changes in the fine-structure constant, alpha, using optical quasar spectra, i.e. those of Na, Mg, Al, Si, Ca, Cr, Mn, Fe, Ni and Zn. We also summarize the information currently missing that precludes more transitions being used. We present an up-to-date set of coefficients, q, which define the sensitivity of these transitions to variations in alpha. New calculations of isotopic structures and q coefficients are performed for SiII and TiII, including SiII 1808 and TiII 1910.6/1910.9 for the first time. Finally, simulated absorption-line spectra are used to illustrate the systematic errors expected if the isotopic/hyperfine structures are omitted from profile fitting analyses. To ensure transparency, repeatability and currency of the data and calculations, we supply a comprehensive database as Supporting Information. This will be updated as new measurements and calculations are performed. △ Less

Submitted 10 July, 2014; v1 submitted 12 November, 2013; originally announced November 2013.

Comments: 24 pages, 12 figures, 15 figures. Accepted for publication in MNRAS. Atomic transition database available through http://researchdata.ands.org.au/laboratory-atomic-transition-data-for-precise-optical-quasar-absorption-spectroscopy . Additions, corrections, updates welcome. v2: Corrected database URL. v2: Corrected typos in Table 12 for NiII1467.2 & 1467.7

Maximum Spectral Luminous Efficacy of White Light

Authors: T. W. Murphy Jr

Abstract: As lighting efficiency improves, it is useful to understand the theoretical limits to luminous efficacy for light that we perceive as white. Independent of the efficiency with which photons are generated, there exists a spectrally-imposed limit to the luminous efficacy of any source of photons. We find that, depending on the acceptable bandpass and---to a lesser extent---the color temperature of t… ▽ More As lighting efficiency improves, it is useful to understand the theoretical limits to luminous efficacy for light that we perceive as white. Independent of the efficiency with which photons are generated, there exists a spectrally-imposed limit to the luminous efficacy of any source of photons. We find that, depending on the acceptable bandpass and---to a lesser extent---the color temperature of the light, the ideal white light source achieves a spectral luminous efficacy of 250--370 lm/W. This is consistent with previous calculations, but here we explore the maximum luminous efficacy as a function of photopic sensitivity threshold, color temperature, and color rendering index; deriving peak performance as a function of all three parameters. We also present example experimental spectra from a variety of light sources, quantifying the intrinsic efficacy of their spectral distributions. △ Less

Submitted 25 September, 2013; originally announced September 2013.

Comments: 8 pages; 9 figures

Journal ref: Journal of Applied Physics: 111, 104909, (2012)

Polarization and far-field diffraction patterns of total internal reflection corner cubes

Authors: T. W. Murphy Jr., S. D. Goodrow

Abstract: Many corner cube prisms, or retroreflectors, employ total internal reflection (TIR) via uncoated rear surfaces. The different elliptical polarization states emerging from the six unique paths through the corner cube complicate the far-field diffraction pattern by introducing various phase delays between the six paths. In this paper, we present a computational framework to evaluate polarization thr… ▽ More Many corner cube prisms, or retroreflectors, employ total internal reflection (TIR) via uncoated rear surfaces. The different elliptical polarization states emerging from the six unique paths through the corner cube complicate the far-field diffraction pattern by introducing various phase delays between the six paths. In this paper, we present a computational framework to evaluate polarization through TIR corner cubes for arbitrary incidence angles and input polarization states, presenting example output for key normal-incidence conditions. We also describe a method to produce far-field diffraction patterns resulting from the polarization analysis, presenting representative images---broken into orthogonal polarizations, and characterizing key cases. Laboratory confirmation is also presented for both polarization states and far-field diffraction patterns. △ Less

Submitted 25 September, 2013; originally announced September 2013.

Comments: 22 pages, 11 figures

Journal ref: Applied Optics: 52, 117-126, (2013)

Effects of thermal gradients on total internal reflection corner cubes

Authors: S. D. Goodrow, T. W. Murphy Jr

Abstract: Uncoated corner cube retroreflectors (CCRs) operating via total internal reflection (TIR) are less susceptible to internal heating than their metal-coated analogs, lacking an absorber on the rear surface. Even so, environments that induce differential heating within the CCR will result in thermal lensing of the incident wavefront, introducing aberrations that will generally reduce the central irra… ▽ More Uncoated corner cube retroreflectors (CCRs) operating via total internal reflection (TIR) are less susceptible to internal heating than their metal-coated analogs, lacking an absorber on the rear surface. Even so, environments that induce differential heating within the CCR will result in thermal lensing of the incident wavefront, introducing aberrations that will generally reduce the central irradiance of the polarization-sensitive far-field diffraction pattern (FFDP). In this paper, we characterize the sensitivity of TIR CCRs to axial and radial thermal gradients. We present simulated FFDPs for key input polarizations and incidence angles and provide a generalized analytic model that approximates the behavior of the central irradiance as temperature differences are introduced. △ Less

Submitted 25 September, 2013; originally announced September 2013.

Comments: 22 pages, 9 figures

Journal ref: Applied Optics: 51, 8793-8799, (2012)

Model-based clustering in networks with Stochastic Community Finding

Authors: Aaron F. McDaid, Brendan Thomas Murphy, Nial Friel, Neil J. Hurley

Abstract: In the model-based clustering of networks, blockmodelling may be used to identify roles in the network. We identify a special case of the Stochastic Block Model (SBM) where we constrain the cluster-cluster interactions such that the density inside the clusters of nodes is expected to be greater than the density between clusters. This corresponds to the intuition behind community-finding methods, w… ▽ More In the model-based clustering of networks, blockmodelling may be used to identify roles in the network. We identify a special case of the Stochastic Block Model (SBM) where we constrain the cluster-cluster interactions such that the density inside the clusters of nodes is expected to be greater than the density between clusters. This corresponds to the intuition behind community-finding methods, where nodes tend to clustered together if they link to each other. We call this model Stochastic Community Finding (SCF) and present an efficient MCMC algorithm which can cluster the nodes, given the network. The algorithm is evaluated on synthetic data and is applied to a social network of interactions at a karate club and at a monastery, demonstrating how the SCF finds the 'ground truth' clustering where sometimes the SBM does not. The SCF is only one possible form of constraint or specialization that may be applied to the SBM. In a more supervised context, it may be appropriate to use other specializations to guide the SBM. △ Less

Submitted 28 October, 2012; v1 submitted 9 May, 2012; originally announced May 2012.

Comments: Presented at COMPSTAT 2012 http://www.compstat2012.org

Robustness of Optimal Synchronization in Real Networks

Authors: Bhargava Ravoori, Adam B. Cohen, Jie Sun, Adilson E. Motter, Thomas E. Murphy, Rajarshi Roy

Abstract: Experimental studies of synchronization properties on networks with controlled connection topology can provide powerful insights into the physics of complex networks. Here, we report experimental results on the influence of connection topology on synchronization in fiber-optic networks of chaotic optoelectronic oscillators. We find that the recently predicted non-monotonic, cusp-like synchronizati… ▽ More Experimental studies of synchronization properties on networks with controlled connection topology can provide powerful insights into the physics of complex networks. Here, we report experimental results on the influence of connection topology on synchronization in fiber-optic networks of chaotic optoelectronic oscillators. We find that the recently predicted non-monotonic, cusp-like synchronization landscape manifests itself in the rate of convergence to the synchronous state. We also observe that networks with the same number of nodes, same number of links, and identical eigenvalues of the coupling matrix can exhibit fundamentally different approaches to synchronization. This previously unnoticed difference is determined by the degeneracy of associated eigenvectors in the presence of noise and mismatches encountered in real-world conditions. △ Less

Submitted 20 June, 2011; originally announced June 2011.

Journal ref: Phys. Rev. Lett. 107, 034102 (2011)

First constraint on cosmological variation of the proton-to-electron mass ratio from two independent telescopes

Authors: Freek van Weerdenburg, Michael T. Murphy, Adrian L. Malec, Lex Kaper, Wim Ubachs

Abstract: A high signal-to-noise spectrum covering the largest number of hydrogen lines (90 H2 lines and 6 HD lines) in a high redshift object was analyzed from an observation along the sight-line to the bright quasar source J2123$-$005 with the UVES spectrograph on the ESO Very Large Telescope (Paranal, Chile). This delivers a constraint on a possible variation of the proton-to-electron mass ratio of Dmu/m… ▽ More A high signal-to-noise spectrum covering the largest number of hydrogen lines (90 H2 lines and 6 HD lines) in a high redshift object was analyzed from an observation along the sight-line to the bright quasar source J2123$-$005 with the UVES spectrograph on the ESO Very Large Telescope (Paranal, Chile). This delivers a constraint on a possible variation of the proton-to-electron mass ratio of Dmu/mu = (8.5 \pm 3.6_{stat} \pm 2.2_{syst}) x 10^{-6} at redshift z=2.059$, which agrees well with a recently published result on the same system observed at the Keck telescope yielding Dmu/mu = (5.6 \pm 5.5_{stat} \pm 2.9_{syst}) x 10^{-6}. Both analyses used the same robust absorption line fitting procedures with detailed consideration of systematic errors. △ Less

Submitted 15 April, 2011; originally announced April 2011.

Comments: Accepted

Journal ref: Phys.Rev.Lett.106:180802,2011

Scalable parallel physical random number generator based on a superluminescent LED

Authors: Xiaowen Li, Adam B Cohen, Thomas E Murphy, Rajarshi Roy

Abstract: We describe an optoelectronic system for simultaneously generating parallel, independent streams of random bits using spectrally separated noise signals obtained from a single optical source. Using a pair of non-overlap** spectral filters and a fiber-coupled superluminescent light-emitting diode (SLED), we produced two independent 10 Gb/s random bit streams, for a cumulative generation rate of 2… ▽ More We describe an optoelectronic system for simultaneously generating parallel, independent streams of random bits using spectrally separated noise signals obtained from a single optical source. Using a pair of non-overlap** spectral filters and a fiber-coupled superluminescent light-emitting diode (SLED), we produced two independent 10 Gb/s random bit streams, for a cumulative generation rate of 20 Gb/s. The system relies principally on chip-based optoelectronic components that could be integrated in a compact, economical package. △ Less

Submitted 15 March, 2011; originally announced March 2011.

Comments: 3 pages, 4 figures

Journal ref: Optics Letters 2011

Atomic transition frequencies, isotope shifts, and sensitivity to variation of the fine structure constant for studies of quasar absorption spectra

Authors: J. C. Berengut, V. A. Dzuba, V. V. Flambaum, J. A. King, M. G. Kozlov, M. T. Murphy, J. K. Webb

Abstract: Theories unifying gravity with other interactions suggest spatial and temporal variation of fundamental "constants" in the Universe. A change in the fine structure constant, alpha, could be detected via shifts in the frequencies of atomic transitions in quasar absorption systems. Recent studies using 140 absorption systems from the Keck telescope and 153 from the Very Large Telescope, suggest that… ▽ More Theories unifying gravity with other interactions suggest spatial and temporal variation of fundamental "constants" in the Universe. A change in the fine structure constant, alpha, could be detected via shifts in the frequencies of atomic transitions in quasar absorption systems. Recent studies using 140 absorption systems from the Keck telescope and 153 from the Very Large Telescope, suggest that alpha varies spatially. That is, in one direction on the sky alpha seems to have been smaller at the time of absorption, while in the opposite direction it seems to have been larger. To continue this study we need accurate laboratory measurements of atomic transition frequencies. The aim of this paper is to provide a compilation of transitions of importance to the search for alpha variation. They are E1 transitions to the ground state in several different atoms and ions, with wavelengths ranging from around 900 - 6000 A, and require an accuracy of better than 10^{-4} A. We discuss isotope shift measurements that are needed in order to resolve systematic effects in the study. The coefficients of sensitivity to alpha-variation (q) are also presented. △ Less

Submitted 17 November, 2010; originally announced November 2010.

Comments: Includes updated version of the "alpha line" list

Indications of a spatial variation of the fine structure constant

Authors: J. K. Webb, J. A. King, M. T. Murphy, V. V. Flambaum, R. F. Carswell, M. B. Bainbridge

Abstract: We previously reported Keck telescope observations suggesting a smaller value of the fine structure constant, alpha, at high redshift. New Very Large Telescope (VLT) data, probing a different direction in the universe, shows an inverse evolution; alpha increases at high redshift. Although the pattern could be due to as yet undetected systematic effects, with the systematics as presently understood… ▽ More We previously reported Keck telescope observations suggesting a smaller value of the fine structure constant, alpha, at high redshift. New Very Large Telescope (VLT) data, probing a different direction in the universe, shows an inverse evolution; alpha increases at high redshift. Although the pattern could be due to as yet undetected systematic effects, with the systematics as presently understood the combined dataset fits a spatial dipole, significant at the 4.2-sigma level, in the direction right ascension 17.5 +/- 0.9 hours, declination -58 +/- 9 degrees. The independent VLT and Keck samples give consistent dipole directions and amplitudes, as do high and low redshift samples. A search for systematics, using observations duplicated at both telescopes, reveals none so far which emulate this result. △ Less

Submitted 31 October, 2011; v1 submitted 23 August, 2010; originally announced August 2010.

Comments: 5 pages, 5 figures, published on 31st October 2011 in Physical Review Letters

Journal ref: Phys. Rev. Lett., 107, 191101, 2011

Advancing Tests of Relativistic Gravity via Laser Ranging to Phobos

Authors: Slava G. Turyshev, William Farr, William M. Folkner, Andre R. Girerd, Hamid Hemmati, Thomas W. Murphy, Jr., James G. Williams, John J. Degnan

Abstract: Phobos Laser Ranging (PLR) is a concept for a space mission designed to advance tests of relativistic gravity in the solar system. PLR's primary objective is to measure the curvature of space around the Sun, represented by the Eddington parameter $γ$, with an accuracy of two parts in $10^7$, thereby improving today's best result by two orders of magnitude. Other mission goals include measurements… ▽ More Phobos Laser Ranging (PLR) is a concept for a space mission designed to advance tests of relativistic gravity in the solar system. PLR's primary objective is to measure the curvature of space around the Sun, represented by the Eddington parameter $γ$, with an accuracy of two parts in $10^7$, thereby improving today's best result by two orders of magnitude. Other mission goals include measurements of the time-rate-of-change of the gravitational constant, $G$ and of the gravitational inverse square law at 1.5 AU distances--with up to two orders-of-magnitude improvement for each. The science parameters will be estimated using laser ranging measurements of the distance between an Earth station and an active laser transponder on Phobos capable of reaching mm-level range resolution. A transponder on Phobos sending 0.25 mJ, 10 ps pulses at 1 kHz, and receiving asynchronous 1 kHz pulses from earth via a 12 cm aperture will permit links that even at maximum range will exceed a photon per second. A total measurement precision of 50 ps demands a few hundred photons to average to 1 mm (3.3 ps) range precision. Existing satellite laser ranging (SLR) facilities--with appropriate augmentation--may be able to participate in PLR. Since Phobos' orbital period is about 8 hours, each observatory is guaranteed visibility of the Phobos instrument every Earth day. Given the current technology readiness level, PLR could be started in 2011 for launch in 2016 for 3 years of science operations. We discuss the PLR's science objectives, instrument, and mission design. We also present the details of science simulations performed to support the mission's primary objectives. △ Less

Submitted 3 September, 2010; v1 submitted 25 March, 2010; originally announced March 2010.

Comments: 25 pages, 10 figures, 9 tables

Journal ref: Experimental Astronomy 28, 209-249 (2010)

High resolution miniature dilatometer based on AFM piezocantilever

Authors: J. -H. Park, D. Graf, T. P. Murphy, G. M. Schmiedeshoff, S. W. Tozer

Abstract: Thermal expansion, or dilation, is closely related to the specific heat, and provides useful information regarding material properties. The accurate measurement of dilation in confined spaces coupled with other limiting experimental environments such as low temperatures and rapidly changing high magnetic fields requires a new sensitive millimeter size dilatometer that has little or no temperatur… ▽ More Thermal expansion, or dilation, is closely related to the specific heat, and provides useful information regarding material properties. The accurate measurement of dilation in confined spaces coupled with other limiting experimental environments such as low temperatures and rapidly changing high magnetic fields requires a new sensitive millimeter size dilatometer that has little or no temperature and field dependence. We have designed an ultra compact dilatometer using an atomic force microscope (AFM) piezoresistive cantilever as the sensing element and demonstrated its versatility by studying the charge density waves (CDWs) in alpha uranium to high magnetic fields (up to 31 T). The performance of this piezoresistive dilatometer was comparable to that of a titanium capacitive dilatometer. △ Less

Submitted 14 October, 2009; v1 submitted 21 September, 2009; originally announced September 2009.

Comments: 9 pages, 3 figures, submitted to Review of Scientific Instruments

Journal ref: Rev.Sci.Instrum.80:116101,2009

Comment on "Limits on the Time Variation of the Electromagnetic Fine-Structure Constant in the Low Energy Limit from Absorption Lines in the Spectra of Distant Quasars"

Authors: Michael T. Murphy, John K. Webb, Victor V. Flambaum

Abstract: In their Letter [Phys. Rev. Lett. 92, 121302 (2004)] (also [Astron. Astrophys. 417, 853 (2004)]), Srianand et al. analysed optical spectra of heavy-element species in 23 absorption systems along background quasar sight-lines, reporting limits on relative variations in the fine-structure constant: da/a=(-0.06+/-0.06) x 10^{-5}. Here we demonstrate basic flaws in their analysis, using the same dat… ▽ More In their Letter [Phys. Rev. Lett. 92, 121302 (2004)] (also [Astron. Astrophys. 417, 853 (2004)]), Srianand et al. analysed optical spectra of heavy-element species in 23 absorption systems along background quasar sight-lines, reporting limits on relative variations in the fine-structure constant: da/a=(-0.06+/-0.06) x 10^{-5}. Here we demonstrate basic flaws in their analysis, using the same data and absorption profile fits, which led to spurious values of da/a and significantly underestimated uncertainties. We conclude that these data and fits offer no stringent test of previous evidence for a varying alpha. In their Reply (arXiv:0711.1742) to this Comment, Srianand et al. state or argue several points regarding their original analysis and our new analysis. We discuss these points here, dismissing all of them because they are demonstrably incorrect or because they rely on a flawed application of simple statistical arguments. △ Less

Submitted 20 November, 2007; v1 submitted 27 August, 2007; originally announced August 2007.

Comments: 1+2 pages, 1 EPS figure. Page 1 accepted as PRL Comment on arXiv:astro-ph/0402177 . Further details available in arXiv:astro-ph/0612407 . v2: Added critical discussion of Reply from Srianand et al. (arXiv:0711.1742)

Journal ref: Phys.Rev.Lett.99:239001,2007

High-precision wavelength calibration of astronomical spectrographs with laser frequency combs

Authors: M. T. Murphy, Th. Udem, R. Holzwarth, A. Sizmann, L. Pasquini, C. Araujo-Hauck, H. Dekker, S. D'Odorico, M. Fischer, T. W. Hänsch, A. Manescau

Abstract: We describe a possible new technique for precise wavelength calibration of high-resolution astronomical spectrographs using femtosecond-pulsed mode-locked lasers controlled by stable oscillators such as atomic clocks. Such `frequency combs' provide a series of narrow modes which are uniformly spaced according to the laser's pulse repetition rate and whose absolute frequencies are known a priori… ▽ More We describe a possible new technique for precise wavelength calibration of high-resolution astronomical spectrographs using femtosecond-pulsed mode-locked lasers controlled by stable oscillators such as atomic clocks. Such `frequency combs' provide a series of narrow modes which are uniformly spaced according to the laser's pulse repetition rate and whose absolute frequencies are known a priori with relative precision better than 10^{-12}. Simulations of frequency comb spectra show that the photon-limited wavelength calibration precision achievable with existing echelle spectrographs should be ~1 cm/s when integrated over a 4000A range. Moreover, comb spectra may be used to accurately characterise distortions of the wavelength scale introduced by the spectrograph and detector system. The simulations show that frequency combs with pulse repetition rates of 5-30GHz are required, given the typical resolving power of existing and possible future echelle spectrographs. Achieving such high repetition rates, together with the desire to produce all comb modes with uniform intensity over the entire optical range, represent the only significant challenges in the design of a practical system. Frequency comb systems may remove wavelength calibration uncertainties from all practical spectroscopic experiments, even those combining data from different telescopes over many decades. △ Less

Submitted 28 June, 2007; v1 submitted 23 March, 2007; originally announced March 2007.

Comments: 10 pages, 6 figures, 1 table. Accepted by MNRAS. v2: Fig. 3 augmented and minor changes to text (including extended title)

Journal ref: Mon.Not.Roy.Astron.Soc.380:839-847,2007

Revision of VLT/UVES constraints on a varying fine-structure constant

Authors: Michael T. Murphy, John K. Webb, Victor V. Flambaum

Abstract: We critically review the current null results on a varying fine-structure constant, alpha, derived from VLT/UVES quasar absorption spectra, focusing primarily on the many-multiplet analysis of 23 absorbers from which Chand et al. (2004) reported a weighted mean relative variation of da/a=(-0.06+/-0.06) x 10^{-5}. Our analysis of the same reduced data, using the same fits to the absorption profil… ▽ More We critically review the current null results on a varying fine-structure constant, alpha, derived from VLT/UVES quasar absorption spectra, focusing primarily on the many-multiplet analysis of 23 absorbers from which Chand et al. (2004) reported a weighted mean relative variation of da/a=(-0.06+/-0.06) x 10^{-5}. Our analysis of the same reduced data, using the same fits to the absorption profiles, yields very different individual da/a values with uncertainties typically larger by a factor of ~3. We attribute the discrepancies to flawed parameter estimation techniques in the original analysis and demonstrate that the original da/a values were strongly biased towards zero. Were those flaws not present, the input data and spectra should have given a weighted mean of da/a=(-0.44+/-0.16) x 10^{-5}. Although this new value does reflect the input spectra and fits (unchanged from the original work -- only our analysis is different), we do not claim that it supports previous Keck/HIRES evidence for a varying alpha: there remains significant scatter in the individual da/a values which may stem from the overly simplistic profile fits in the original work. Allowing for such additional, unknown random errors by increasing the uncertainties on da/a to match the scatter provides a more conservative weighted mean, da/a=(-0.64+/-0.36) x 10^{-5}. We highlight similar problems in other current UVES constraints on varying alpha and argue that comparison with previous Keck/HIRES results is premature. △ Less

Submitted 11 November, 2007; v1 submitted 14 December, 2006; originally announced December 2006.

Comments: 11 pages, 7 figures (10 EPS files). Accepted by MNRAS. v3: Added figure summarizing all current UVES constraints; added references and corrected typos

Journal ref: Mon.Not.Roy.Astron.Soc.384:1053-1062,2008

Probing variations in fundamental constants with radio and optical quasar absorption-line observations

Authors: P. Tzanavaris, M. T. Murphy, J. K. Webb, V. V. Flambaum, S. J. Curran

Abstract: Nine quasar absorption spectra at 21-cm and UV rest-wavelengths are used to estimate possible variations in x=alpha^2 g_p mu, (alpha is the fine structure constant, g_p the proton g-factor and mu=me/mp the electron-to-proton mass ratio). We find <Delta x/x>^weighted_total(=Dxxwt)=(0.63+-0.99) 10^-5 over 0.23~<z_abs~<2.35 (2.7 to 10.5 Gyr, look-back time, t_lb). A linear best fit against t_lb, ti… ▽ More Nine quasar absorption spectra at 21-cm and UV rest-wavelengths are used to estimate possible variations in x=alpha^2 g_p mu, (alpha is the fine structure constant, g_p the proton g-factor and mu=me/mp the electron-to-proton mass ratio). We find <Delta x/x>^weighted_total(=Dxxwt)=(0.63+-0.99) 10^-5 over 0.23~<z_abs~<2.35 (2.7 to 10.5 Gyr, look-back time, t_lb). A linear best fit against t_lb, tied to Delta x/x=0 at z=0, gives (dot x)/x=(-0.6+-1.2) 10^-15 /yr. Our large sample demonstrates that intrinsic line-of-sight velocity differences between the 21-cm and UV absorption redshifts, (on average Delta_vlos~6km/s), with random sign and magnitude in each absorption system, limit our precision. Combining our Delta x/x measurement with absorption-line constraints on alpha-variation yields strong limits on the variation of mu. Our most conservative estimate, obtained by assuming no variations in alpha or g_p is Delta mu/mu(=Dmm)=Dxxwt. If we use only the four high-redshift absorbers in our sample, we obtain Dmm=(0.58+-1.95) 10^-5, which agrees (2sigma) with recent, more direct estimates from two absorption systems containing molecular hydrogen, also at high redshift, and which have hinted at a possible mu-variation, Dmm=(-2.0+-0.6) 10^-5. Our method of constraining Dmm is completely independent from the molecular hydrogen observations. If we include the low-redshift systems, our Dmm result differs significantly from the high-redshift molecular hydrogen results. We detect a dipole variation in mu across the sky, but this model is required by the data at only the 88 per cent confidence level. Clearly, much larger samples of 21-cm and molecular hydrogen absorbers are required to adequately resolve the issue of the variation of mu and x.(Abridged) △ Less

Submitted 17 October, 2006; v1 submitted 11 October, 2006; originally announced October 2006.

Comments: 19 pages, 11 figures. Accepted for publication in MNRAS. Replaced with correct figure 1

Journal ref: Mon.Not.Roy.Astron.Soc.374:634-646,2007

Limits on variations in fundamental constants from 21-cm and ultraviolet quasar absorption lines

Authors: P. Tzanavaris, J. K. Webb, M. T. Murphy, V. V. Flambaum, S. J. Curran

Abstract: Quasar absorption spectra at 21-cm and UV rest-wavelengths are used to estimate the time variation of x=alpha^2 g_p mu, where alpha is the fine structure constant, g_p the proton g factor, and m_e/m_p=mu the electron/proton mass ratio. Over a redshift range 0.24 ~< z_abs ~< 2.04, <Delta x/x>_total_weighted=(1.17+-1.01) x 10^-5. A linear fit gives d/dt{x}/x=(-1.43+-1.27) x 10^-15 yr^-1. Two previ… ▽ More Quasar absorption spectra at 21-cm and UV rest-wavelengths are used to estimate the time variation of x=alpha^2 g_p mu, where alpha is the fine structure constant, g_p the proton g factor, and m_e/m_p=mu the electron/proton mass ratio. Over a redshift range 0.24 ~< z_abs ~< 2.04, <Delta x/x>_total_weighted=(1.17+-1.01) x 10^-5. A linear fit gives d/dt{x}/x=(-1.43+-1.27) x 10^-15 yr^-1. Two previous results on varying alpha yield the strong limits Delta mu/mu=(2.31+-1.03) x 10^-5 and Delta mu/mu=(1.29+-1.01) x 10^-5. Our sample, 8x larger than any previous, provides the first direct estimate of the intrinsic 21-cm and UV velocity differences ~6 km s^-1. △ Less

Submitted 11 July, 2005; v1 submitted 29 December, 2004; originally announced December 2004.

Comments: 12 pages, 9 figures, accepted on 10 June 2005 for publication in Physical Review Letters. Results unchanged. Minor restructuring of abstract and one reference added. Pages 1-4 identical to accepted version following referees' comments. Pages 5-12 show plots to improve understanding of this work

Journal ref: Phys.Rev.Lett.95:041301,2005